Cell Structure Research Articles

Injection molded lightweight composites from tea-stem fiber and polypropylene: Effect of fiber loading on forming properties and cell structure

China boasts abundant tea resources and substantial production output. To facilitate the high-value utilization of by-products generated during tea production, such as tea stems, thereby reducing resource wastage, this study pioneered the preparation of tea-stem fiber-reinforced polypropylene (TF/PP) composites through microcellular injection and conventional molding processes. The effects of tea-stem fiber (TF) content on the formability of foamed and unfoamed composites were compared and analyzed. The findings reveal that the inclusion of TFs fostered the crystallization of polymer chains, decreased the flowability of the composites in their molten state, and enhanced the density, surface hydrophilicity, and thermal stability of the molded composites. In the unfoamed state, composites with 20 wt%, 40 wt%, and 30 wt% TF content exhibited optimal tensile (35.92 MPa), flexural (58.43 MPa), and impact (6.49 KJ/m2) strength, respectively. Upon foaming, composites with TF contents of 30 wt%, 40 wt%, and 30 wt% demonstrated superior tensile (32.84 MPa), flexural (51.31 MPa), and impact (6.94 KJ/m2) strength, respectively. A 30 % TF content in foamed composites yielded the best reinforcement effect, creating an ideal balance of internal interactions. This resulted in mechanical properties that were close to or even exceeded those of unfoamed PP while reducing the density by nearly 6 %. The results from this study contribute towards the high-value application of tea by-products, promoting the development of the global tea economy.

Comparison of Pb-based and Sn-based perovskite solar cells using SCAPS simulation: optimal efficiency of eco-friendly CsSnI3 devices.

In this study, we employed the one-dimensional solar cell capacitance simulator (SCAPS-1D) software to optimize the performance of Pb-based and Sn-based (Pb-free) all-inorganic perovskites (AIPs) and organic-inorganic perovskites (OIPs) in perovskite solar cell (PSC) structures. Due to the higher stability of AIPs, the performance of PSCs incorporating Cs-based perovskites was compared with that of FA-based perovskites, which are more stable than their MA-based counterparts. The impact of AIPs such as CsPbCl3, CsPbBr3, CsPbI3, CsSnCl3, CsSnBr3, and CsSnI3, as well as including FAPbCl3, FAPbBr3, FAPbI3, FASnCl3, FASnBr3, and FASnI3, was investigated. SnO2 and Cu2O were selected as an inorganic electron transport layer (ETL) and a hole transport layer (HTL), respectively. CsSnBr₃, CsSnI₃, FASnCl₃, and FASnBr₃ exhibited higher efficiency compared to their Pb-based counterparts. Additionally, most Cs-based perovskites, excluding CsPbI₃, demonstrated better performance relative to their FA counterparts. CsSnI3 AIP device also shows the highest short circuit current density (JSC) of 32.85mA/cm2, the best power conversion efficiency (PCE) of 16.00%, and the least recombination at the SnO2/CsSnI3 interface. The thickness, doping, and total defect density of CsSnI3 PSC have been systematically investigated and optimized to obtain the PCE of 17.36%. These findings highlight the potential of CsSnI3 PSCs as efficient and environmentally friendly PSCs.

Performance evaluation of thin film GaSb thermophotovoltaic cells

Economical converters are the key component for the industrial applications of thermophotovoltaic technology. In this work thin film GaSb cells are demonstrated for broadband thermophotovoltaic energy conversion. It is shown that n-on-p configuration is a superior choice for thin film cell due to its larger accessible efficiency. Under the illumination of unshaped blackbody spectrum, the matched spectrum temperature for GaSb thin film cells should be in the range of 2000∼2600 K, With those matched spectra, the optimal GaSb thin film can achieve the efficiency up to 8% or so with V OC = 0.55 V, FF = 0.64, J SC = 44 A cm−2, thus showing the power density output up to 15 W cm−2 while only having the active layer thickness 4.5 μm or so. These results are well preserved for S F no more than 104 cm s−1. With increasing spectrum temperature, a phenomenological model has also been formulated to analytically predict the optimal cell structure at a given spectrum illumination. This work has thus established the fundamental guidelines to develop GaSb thin film cells or subcells for economical thermophotovoltaic energy conversion.

Design and simulation of BeSiP2-based high-performance solar cell and photosensor

This research composition provides a novel as well as non-toxic chalcopyrite-category BeSiP2 (BSP) compound-based structure that is inspected by a solar cell capacitance simulator software (SCAPS-1D) and this structure can be used for both solar cell (SC) and photosensor (PS) industries. In this structure, indium sulphide (In2S3) and molybdenum sulphide (MoS2) are exploited as window and back surface field (BSF) layers. By arranging the BSP-based photonic (photosensor and solar cell) structure, the optimized condition of different layers has been determined. Without the MoS2 layer, the value of SC and PS performance parameters are JSC of 29.75 mA/cm2, VOC of 0.84 V, FF of 83.96 %, PCE of 20.97 %, R of 0.51 AW−1 and D* of 1.68 × 1015 Jones. But with a thin MoS2 layer, the SC and PS performance parameters of the BSP compound-based photonic gadget (PG) progress meaningfully. The progress of SC and PS parameters are JSC of 34.44 mA/cm2, VOC of 0.99 V, FF of 87.45 %, PCE of 29.83 %, R of 0.64 AW−1 and D∗ of 3.63 × 1016 Jones, separately. These findings exhibit that BSP-based structure can be used for both solar cell and photodetector devices, which could be highly efficient and cost-effective fabrication in photonic industries.

Melatonin Improves Oxidative Stress Injury in Retinopathy of Prematurity by Targeting miR-23a-3p/Nrf2

Purpose Melatonin has promising protective effects for retinopathy. However, its roles in retinopathy of prematurity (ROP) and the underlying mechanisms remain unknown. We aimed to explore its roles and mechanisms in a ROP model. Methods Hematoxylin and eosin staining were used to observe the morphology of the retina. Immunofluorescence was used to detect positive (Nrf2+ and VEGF+) cells. Immunohistochemistry was used to detect the level of nuclear expression of PCNA in retinal tissue. Transmission electron microscope (TEM) was used to observe the morphology and structure of pigment cells. qRT-PCR was used to assay the expression of miR-23a-3p, Nrf2, and HO-1. Western blotting was used to detect the expression of Nrf2, HO-1, β-actin, and Lamin B1. Results Melatonin or miR-23a-3p antagomir treatment could ameliorate the Oxygen-induced pathological changes, increased the expression of Nrf2 and HO-1, SOD, and GSH-Px, and decreased the expression of VEGF, miR-23a-3p, MDA and the apoptosis in the ROP model. Further target prediction and luciferase reporter assays confirmed the targeted binding relationship between miR-23a-3p and Nrf2. Conclusion Our study showed that melatonin could ameliorate H2O2-induced apoptosis and oxidative stress injury in RGC cells by mediating miR-23a-3p/Nrf2 signaling pathway, thereby improving retinal degeneration.

Diffusion model predicts the geometry of actin cytoskeleton from cell morphology.

Cells exhibit various morphological characteristics due to their physiological activities, and changes in cell morphology are inherently accompanied by the assembly and disassembly of the actin cytoskeleton. Stress fibers are a prominent component of the actin-based intracellular structure and are highly involved in numerous physiological processes, e.g., mechanotransduction and maintenance of cell morphology. Although it is widely accepted that variations in cell morphology interact with the distribution and localization of stress fibers, it remains unclear if there are underlying geometric principles between the cell morphology and actin cytoskeleton. Here, we present a machine learning system that uses the diffusion model to convert the cell shape to the distribution and alignment of stress fibers. By training with corresponding cell shape and stress fibers datasets, our system learns the conversion to generate the stress fiber images from its corresponding cell shape. The predicted stress fiber distribution agrees well with the experimental data. With this conversion relation, our system allows for performing virtual experiments that provide a visual map showing the probability of stress fiber distribution from the virtual cell shape. Our system potentially provides a powerful approach to seek further hidden geometric principles regarding how the configuration of subcellular structures is determined by the boundary of the cell structure; for example, we found that the stress fibers of cells with small aspect ratios tend to localize at the cell edge while cells with large aspect ratios have homogenous distributions.

Enzalutamide inhibits PEX10 function and sensitizes prostate cancer cells to ROS activators

Sharply increased reactive oxygen species (ROS) are thought to induce oxidative stress, damage cell structure and cause cell death; however, its role in prostate cancer remains unclear. Enzalutamide is a widely used anti-prostate cancer drug that antagonizes androgen binding with its receptor. Further exploration of the mechanism and potential application strategies of enzalutamide is crucial for the treatment of prostate cancer. Here, we confirmed PEX10 can be induced by ROS activators while reduce ROS level in prostate cancer cells, which weakened the anti-tumor effect of ROS activators. The androgen receptor (AR) can promote the expression of PEX10 by acting as an enhancer in cooperation with FOXA1. The anti-tumor drug enzalutamide inhibits PEX10 by inhibiting the function of AR, and synergize with ROS activators ML210 or RSL3 to produce a stronger anti-tumor effect, thereby sensitizing cells to ROS activators. This study reveals a previously unrecognized function of enzalutamide and AR by regulating PEX10 and suggests a new strategy of enzalutamide application in prostate cancer treatment.

A high-density linkage map reveals broad- and fine-scale sex differences in recombination in the hihi (stitchbird; Notiomystis cincta).

Recombination, the process of DNA exchange between homologous chromosomes during meiosis, plays a major role in genomic diversity and evolutionary change. Variation in recombination rate is widespread despite recombination often being essential for progression of meiosis. One such variation is heterochiasmy, where recombination rates differ between sexes. Heterochiasmy has been observed across broad taxonomic groups, yet it remains an evolutionary enigma. We used Lep-MAP3, a pedigree-based software that is efficient in handling large datasets, to generate linkage maps for the hihi or stitchbird (Notiomystis cincta), utilising information from >36 K SNPs and 36 families. We constructed 29 linkage maps, including for the previously unscaffolded Z chromosome. The hihi is an endangered passerine endemic to Aotearoa New Zealand that is sexually dimorphic and exhibits high levels of sexual conflict, including sperm competition. Patterns in recombination in the hihi are consistent with those in other birds, including higher recombination rates in micro-chromosomes. Heterochiasmy in the hihi is male-biased, in line with predictions of the Haldane-Huxley rule, with the male linkage map being 15% longer. Micro-chromosomes exhibit heterochiasmy to a greater extent, contrary to that reported in other birds. At the intra-chromosomal level, heterochiasmy is higher nearer to chromosome ends and in gene-rich regions. Regions of extreme heterochiasmy are enriched for genes implicated in cell structure. This study adds an important contribution in assessing evolutionary theories of heterochiasmy and provides a framework for future studies investigating fine-scale heterochiasmy.

Exploring the viability of secondary absorber materials in perovskite solar cell structures through computational analysis

Exploring the viability of secondary absorber materials in perovskite solar cell structures through computational analysis

Posterior approach to correct for focal plane offsets in lattice light-sheet structured illumination microscopy.

Lattice light-sheet structured illumination microscopy (latticeSIM) has proven highly effective in producing three-dimensional images with super resolution rapidly and with minimal photobleaching. However, due to the use of two separate objectives, sample-induced aberrations can result in an offset between the planes of excitation and detection, causing artifacts in the reconstructed images. We introduce a posterior approach to detect and correct the axial offset between the excitation and detection focal planes in latticeSIM and provide a method to minimize artifacts in the reconstructed images. We utilized the residual phase information within the overlap regions of the laterally shifted structured illumination microscopy information components in frequency space to retrieve the axial offset between the excitation and the detection focal planes in latticeSIM. We validated our technique through simulations and experiments, encompassing a range of samples from fluorescent beads to subcellular structures of adherent cells. We also show that using transfer functions with the same axial offset as the one present during data acquisition results in reconstructed images with minimal artifacts and salvages otherwise unusable data. We envision that our method will be a valuable addition to restore image quality in latticeSIM datasets even for those acquired under non-ideal experimental conditions.

Comparative examination of both spectral properties and hybrid solar cell application of 2,4,6-trimethoxyphenoxy substituted phthalocyanine dyes

In this study, novel octa 2,4,6-trimethoxyphenoxy substituted phthalocyanines, and tetra chloro and tetra 2,4,6-trimethoxyphenoxy substituted phthalocyanines were synthesized, characterized, examined their spectral properties comparatively and investigated of hybrid solar cell application of them. The spectral characterization can be performed for all phthalocyanine compounds, solar cell application was only possible for tetra chloro tetra 2,4,6-trimethoxyphenoxy substituted phthalocyanines, the others phthalocyanines not due to their low yield.Solar cell properties of the tetra chloro tetra 2,4,6-trimethoxyphenoxy substituted phthalocyanines were studied using the ITO/ZnO/C60/ P3HT /LiF/Al structure. In order to improve and compare performance parameters of the poly(3-hexylthiophene) (P3HT) based solar cells, the tetra chloro tetra 2,4,6-trimethoxyphenoxy substituted H2Pc(2), Co(II)Pc (3) and Ni(II)Pc (4) compounds were incorporated individually into the solar cell structure between ZnO and C60 layers in which amorphous ZnO nanoparticles serves as electron transfer layer. Solar cell performance parameters such as short circuit current density (JSC), open circuit voltage (VOC), fill factor (FF) and power conversion efficiency (η) were studied as comparison parameters. Incorporation of Ni(II)Pc (4) into the reference structure between ZnO and C60 caused an increase 23.4 % in Jsc and 4.4 % in η whereas incorporation of Co(II)Pc (3) layer into the reference structure caused an increase 135.0 % in Jsc and 107.0 % in η under an illumination of 100 mW/cm2 with an AM 1.5G solar simulator. The best JSC and η (%) values were obtained for P3HT based solar cells with Co(II)Pc (3) interlayer.

Natural activators of autophagy

Autophagy is the process by which cell contents, such as aggregated proteins, dysfunctional organelles, and cell structures, are sequestered by the autophagosome and delivered to lysosomes for degradation. As a process that allows the cell to get rid of non-functional components that tend to accumulate with age, autophagy has been associated with many human diseases. In this regard, the search for autophagy activators and the study of their mechanism of action is an important task for the treatment of many diseases, as well as for increasing healthy life expectancy. Plants are rich sources of autophagy activators, containing a large amount of polyphenolic compounds in their composition, which can be activators in their original form, or can be metabolized by the intestinal microbiota to active compounds. This review is devoted to plant-based autophagy activators with an emphasis on the sources of their production, mechanism of action, and application in various diseases. The review also describes companies commercializing natural autophagy activators.

A real-time and energy-efficient SRAM with mixed-signal in-memory computing near CMOS sensors

In-memory computing (IMC) represents a promising approach to reducing latency and enhancing the energy efficiency of operations required for calculating convolution products of images. This study proposes a fully differential current-mode architecture for computing image convolutions across all four quadrants, intended for deep learning applications within CMOS imagers utilizing IMC near the CMOS sensor. This architecture processes analog signals provided by a CMOS sensor without the need for analog-to-digital conversion. Furthermore, it eliminates the necessity for data transfer between memory and analog operators as convolutions are computed within modified SRAM memory. The paper suggests modifying the structure of a CMOS SRAM cell by incorporating transistors capable of performing multiplications between binary (−1 or +1) weights and analog signals. Modified SRAM cells can be interconnected to sum the multiplication results obtained from individual cells. This approach facilitates connecting current inputs to different SRAM cells, offering highly scalable and parallelized calculations. For this study, a configurable module comprising nine modified SRAM cells with peripheral circuitry has been designed to calculate the convolution product on each pixel of an image using a 3×3\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$3 \ imes 3$$\\end{document} mask with binary values (−1 or 1). Subsequently, an IMC module has been designed to perform 16 convolution operations in parallel, with input currents shared among the 16 modules. This configuration enables the computation of 16 convolutions simultaneously, processing a column per cycle. A digital control circuit manages both the readout or memorization of digital weights, as well as the multiply and add operations in real-time. The architecture underwent testing by performing convolutions between binary masks of 3 × 3 values and images of 32 × 32 pixels to assess accuracy and scalability when two IMC modules are vertically integrated. Convolution weights are stored locally as 1-bit digital values. The circuit was synthesized in 180 nm CMOS technology, and simulation results indicate its capability to perform a complete convolution in 3.2 ms, achieving an efficiency of 11,522 1-b TOPS/W (1-b tera-operations per second per watt) with a similarity to ideal processing of 96%.

Penyerap Bahan Meta Berbilang Lapisan Padat untuk Aplikasi Frekuensi Satelit Jalur Ka

This work investigates the effects of multi-layered metamaterial design for absorption application at satellite frequency. This is because, the adopted Ka-band frequency is very useful for current technology which can be used in highresolution, close-range targeting radars, military aircraft, space telescopes, commercial, and wireless point-point microwave communication systems. Hence, this work focused on producing a compact design by adopting the optimisation method. Four square-shaped and two circular-shaped metamaterial rings were designed on 0.25 mm substrate material. Furthermore, the properties of the proposed metamaterial were discovered by adopting Computer Simulation Technology. This analytical simulation was performed for a frequency range between 27 and 40 GHz. On the other hand, several design analyses were investigated to gain an optimal metamaterial design structure for the proposed applications. For instance, unit cell selection analysis, reflection coefficient and absorbance analysis of the multi-layer metamaterial. Moreover, the proposed unit cell metamaterial manifests double resonance frequencies for reflection and transmission coefficients approximately at 27.31 GHz, 33.40 GHz and 30.56 GHz, 38.23GHz, respectively. The increment of layers on the proposed unit cell structure revealed unique responses. For example, the double multilayer metamaterial manifests similar dual resonance frequencies as the unit cell design but gains excellent magnitude values of more than -10. Moreover, the absorbance of the three distinct layer metamaterials, likely double, triple and quadruple layers were analysed as well in this work. Overall, the proposed compact metamaterial absorber exhibits unique behaviours for Ka-band satellite frequency applications.

Human tripartite cortical network model for temporal assessment of alpha-synuclein aggregation and propagation in Parkinson’s Disease

Previous studies have shown that aggregated alpha-synuclein (α-s) protein, a key pathological marker of Parkinson’s disease (PD), can propagate between cells, thus participating in disease progression. This prion-like propagation has been widely studied using in vivo and in vitro models, including rodent and human cell cultures. In this study, our focus was on temporal assessment of functional changes during α-s aggregation and propagation in human induced pluripotent stem cell (hiPSC)-derived neuronal cultures and in engineered networks. Here, we report an engineered circular tripartite human neuronal network model in a microfluidic chip integrated with microelectrode arrays (MEAs) as a platform to study functional markers during α-s aggregation and propagation. We observed progressive aggregation of α-s in conventional neuronal cultures and in the exposed (proximal) compartments of circular tripartite networks following exposure to preformed α-s fibrils (PFF). Furthermore, aggregated forms propagated to distal compartments of the circular tripartite networks through axonal transport. We observed impacts of α-s aggregation on both the structure and function of neuronal cells, such as in presynaptic proteins, mitochondrial motility, calcium oscillations and neuronal activity. The model enabled an assessment of the early, middle, and late phases of α-s aggregation and its propagation during a 13-day follow-up period. While our temporal analysis suggested a complex interplay of structural and functional changes during the in vitro propagation of α-s aggregates, further investigation is required to elucidate the underlying mechanisms. Taken together, this study demonstrates the technical potential of our introduced model for conducting in-depth analyses for revealing such mechanisms.

Stability and energy consumption of solid oxide electrolysis cells under wide fluctuating and stable conditions

The combination of solid oxide electrolysis cells (SOECs) with renewable electricity has enormous potential, but this requires the cells to be able to adapt to strong fluctuation conditions. This work directly combines fluctuating actual wind power with flat-tube Ni-YSZ/YSZ/LSCF-GDC SOECs to study the operational stability and energy consumption under wide fluctuation and constant current electrolysis. The results indicate that under an average electrolysis current density of 0.26 A cm−2, there is little difference in stability between fluctuation and constant current electrolysis. At a high current density of 0.58 A cm−2, the cells operating for 375 h under fluctuation conditions exhibit a larger degradation rate. The current density is dynamically switched between 0 and 0.93 A cm−2 to simulate actual wind turbine power fluctuations from 0 to 100 %. After rapid large-scale current switches for 2000 times in 375 h, little change is observed in the cell structure. Under fluctuating electrolysis, the minimum energy consumption for power-to-gas conversion in SOEC is 2.84 kWh/Nm3, while under constant current electrolysis, the lowest energy consumption is 2.67 kWh/Nm3. In summary, SOECs can efficiently and stably consume and store highly fluctuating renewable power and can also dynamically respond to wide power ranges from 0 to 100 %.

Network pharmacology-based exploration of molecular mechanisms underlying therapeutic effects of Jianpi Huatan Quyu recipe on chronic heart failure with spleen Qi deficiency syndrome.

Chronic heart failure is a complex clinical syndrome. The Chinese herbal compound preparation Jianpi Huatan Quyu recipe has been used to treat chronic heart failure; however, the underlying molecular mechanism is still not clear. To identify the effective active ingredients of Jianpi Huatan Quyu recipe and explore its molecular mechanism in the treatment of chronic heart failure. The effective active ingredients of eight herbs composing Jianpi Huatan Quyu recipe were identified using the Traditional Chinese Medicine Systems Pharmacology Database and Analysis Platform. The target genes of chronic heart failure were searched in the Genecards database. The target proteins of active ingredients were mapped to chronic heart failure target genes to obtain the common drug-disease targets, which were then used to construct a key chemical component-target network using Cytoscape 3.7.2 software. The protein-protein interaction network was constructed using the String database. Gene Ontology and Kyoto Encyclopedia of Genes and Genomes enrichment analyses were performed through the Metascape database. Finally, our previously published relevant articles were searched to verify the results obtained via network pharmacology. A total of 227 effective active ingredients for Jianpi Huatan Quyu recipe were identified, of which quercetin, kaempferol, 7-methoxy-2-methyl isoflavone, formononetin, and isorhamnetin may be key active ingredients and involved in the therapeutic effects of TCM by acting on STAT3, MAPK3, AKT1, JUN, MAPK1, TP53, TNF, HSP90AA1, p65, MAPK8, MAPK14, IL6, EGFR, EDN1, FOS, and other proteins. The pathways identified by KEGG enrichment analysis include pathways in cancer, IL-17 signaling pathway, PI3K-Akt signaling pathway, HIF-1 signaling pathway, calcium signaling pathway, cAMP signaling pathway, NF-kappaB signaling pathway, AMPK signaling pathway, etc. Previous studies on Jianpi Huatan Quyu recipe suggested that this Chinese compound preparation can regulate the TNF-α, IL-6, MAPK, cAMP, and AMPK pathways to affect the mitochondrial structure of myocardial cells, oxidative stress, and energy metabolism, thus achieving the therapeutic effects on chronic heart failure. The Chinese medicine compound preparation Jianpi Huatan Quyu recipe exerts therapeutic effects on chronic heart failure possibly by influencing the mitochondrial structure of cardiomyocytes, oxidative stress, energy metabolism, and other processes. Future studies are warranted to investigate the role of the IL-17 signaling pathway, PI3K-Akt signaling pathway, HIF-1 signaling pathway, and other pathways in mediating the therapeutic effects of Jianpi Huatan Quyu recipe on chronic heart failure.

Broadband vortex beam generation by a reflective meta-surface based on a metal double-slit resonant ring

Recently, the meta-surface (MS) has emerged as a promising alternative method for generating vortex waves. At the same time, MS also faces the problem of a narrow bandwidth; in order to obtain a broad bandwidth, the MS unit cell structure becomes more and more complex, which will bring many inconveniences to the preparation process of MS devices. Therefore, we want to design a simple MS unit cell with a multi-frequency selection. In this paper, based on the principle of geometric phase, we design a simple reflective MS unit cell based on a metal double-slit resonant ring. We elaborate on the resonance mechanism of the MS unit cell. Under the normal incidence of circularly polarized (CP) waves, the reflection coefficient of the same polarization was greater than 85%. By rotating the orientation angle of the resonator on the MS unit cell, the continuous 2π phase coverage was satisfied in the frequency range of 0.52–1.1 THz, and the relative bandwidth becomes 71.6%. Based on this, we construct a vortex generator by using a 15×15 MS unit array. The right-handed circularly polarized (RCP) waves and left-handed circularly polarized (LCP) wave are separately incident on MS with topological charges of l=+1,+2,+3 under multiple resonant frequencies. The generated RCP vortex wave has topological charges of l=−1,−2,−3 and the generated LCP vortex wave has topological charges of l=+1,+2,+3. The numerical simulation results demonstrate that our designed MS, capable of achieving multiple resonance outcomes, can effectively operate in a multi-broadband mode and produce a wide-band vortex beam. In addition, we also calculate the pattern purity. Through theoretical analysis and numerical simulation, we prove that our designed MS can generate a broadband vortex wave.

Visualization of 2D and 3D Tissue Models via Size-Selected Aqueous AgInS/ZnS Quantum Dots.

Three-dimensional (3D) spheroid cell cultures of fibroblast (L929) and tumor mammary mouse (4T1) were chosen as in vitro tissue models for tissue imaging of ternary AgInS/ZnS fraction quantum dots (QDs). We showed that the tissue-mimetic morphology of cell spheroids through well-developed cell-cell and cell-matrix interactions and distinct diffusion/transport characteristics makes it possible to predict the effect of ternary AgInS/ZnS fraction QDs on the vital activity of cells while simultaneously comparing with classical two-dimensional (2D) cell cultures. The AgInS/ZnS fractions, emitting in a wide spectral range from 635 to 535 nm with a mean size from ∼3.1 ± 0.8 to ∼1.8 ± 0.4 nm and a long photoluminescence lifetime, were separated from the initial QD ensemble by using antisolvent-induced precipitation. For ternary AgInS/ZnS fraction QDs, the absence of toxicity at different QD concentrations was demonstrated on 2D and 3D cell structures. QDs show a robust correlation between numerous factors: their sizes in biological fluids over time, penetration capabilities into 2D and 3D cell structures, and selectivity with respect to penetration into cancerous and healthy cell spheroids. A reproducible protocol for the preparation of QDs along with their unique biological properties allows us to consider ternary AgInS/ZnS fraction QDs as attractive fluorescent contrast agents for tissue imaging.

Comprehensive study on the physical properties of CuO-ZnO thin films: Insights into solar cell simulation

Metal oxide semiconductors have long been utilized in various optoelectronic applications, including solar cells, photocatalysis, and Schottky diodes. However, these materials often encounter challenges, prompting the exploration of alternative thin-film structures composed of non-toxic and cost-effective materials. One such promising system is the Coupled Oxide Systems (COS), exemplified by CuO-ZnO (CZO). Despite the potential of COS, comprehensive studies on their synthesis and optimization remain limited. Here, we investigate the physical and optical properties of CZO thin films, confirming successful synthesis and highlighting their potential as alternatives to conventional materials like CIGS and CdTe. In the second part, we explore a novel solar cell structure, FTO/ZnO/X/CuO-ZnO/Mo, with various buffer layer options (CdS, ZnS, Zn0.38Ge0.62O, SnS2, and [Al0.025Ga0.975]2O3). Our results reveal that the solar cell with CdS as the buffer layer exhibits the highest efficiency. This work not only summarizes the fundamental principles governing the optoelectronic properties of materials but also elucidates critical strategies for fabricating high-efficiency solar cells. Furthermore, we have conducted a comparative analysis involving 70 different solar cell structures. Additionally, we discuss potential strategies for the next generation of solar cells to further enhance power conversion efficiency (PCE).