Structural Similarity Index Metric Research Articles

Deep learning generation of preclinical positron emission tomography (PET) images from low-count PET with task-based performance assessment.

Preclinical low-count positron emission tomography (LC-PET) imaging offers numerous advantages such as facilitating imaging logistics, enabling longitudinal studies of long- and short-lived isotopes as well as increasing scanner throughput. However, LC-PET is characterized by reduced photon-count levels resulting in low signal-to-noise ratio (SNR), segmentation difficulties, and quantification uncertainties. We developed and evaluated a novel deep-learning (DL) architecture-Attention based Residual-Dilated Net (ARD-Net)-to generate standard-count PET (SC-PET) images from LC-PET images. The performance of the ARD-Net framework was evaluated for numerous low count realizations using fidelity-based qualitative metrics, task-based segmentation, and quantitative metrics. Patient Derived tumor Xenograft (PDX) with tumors implanted in the mammary fat-pad were subjected to preclinical [18F]-Fluorodeoxyglucose (FDG)-PET/CT imaging. SC-PET images were derived from a 10min static FDG-PET acquisition, 50min post administration of FDG, and were resampled to generate four distinct LC-PET realizations corresponding to 10%, 5%, 1.6%, and 0.8% of SC-PET count-level. ARD-Net was trained and optimized using 48 preclinical FDG-PET datasets, while 16 datasets were utilized to assess performance. Further, the performance of ARD-Net was benchmarked against two leading DL-based methods (Residual UNet, RU-Net; and Dilated Network, D-Net) and non-DL methods (Non-Local Means, NLM; and Block Matching 3D Filtering, BM3D). The performance of the framework was evaluated using traditional fidelity-based image quality metrics such as Structural Similarity Index Metric (SSIM) and Normalized Root Mean Square Error (NRMSE), as well as human observer-based tumor segmentation performance (Dice Score and volume bias) and quantitative analysis of Standardized Uptake Value (SUV) measurements. Additionally, radiomics-derived features were utilized as a measure of quality assurance (QA) in comparison to true SC-PET. Finally, a performance ensemble score (EPS) was developed by integrating fidelity-based and task-based metrics. Concordance Correlation Coefficient (CCC) was utilized to determine concordance between measures. The non-parametric Friedman Test with Bonferroni correction was used to compare the performance of ARD-Net against benchmarked methods with significance at adjusted p-value ≤0.01. ARD-Net-generated SC-PET images exhibited significantly better (p ≤ 0.01 post Bonferroni correction) overall image fidelity scores in terms of SSIM and NRMSE at majority of photon-count levels compared to benchmarked DL and non-DL methods. In terms of task-based quantitative accuracy evaluated by SUVMeanand SUVPeak, ARD-Net exhibited less than 5% median absolute bias for SUVMean compared to true SC-PET and lower degree of variability compared to benchmarked DL and non-DL based methods in generating SC-PET. Additionally, ARD-Net-generated SC-PET images displayed higher degree of concordance to SC-PET images in terms of radiomics features compared to non-DL and other DL approaches. Finally, the ensemble score suggested that ARD-Net exhibited significantly superior performance compared to benchmarked algorithms (p ≤ 0.01 post Bonferroni correction). ARD-Net provides a robust framework to generate SC-PET from LC-PET images. ARD-Net generated SC-PET images exhibited superior performance compared other DL and non-DL approaches in terms of image-fidelity based metrics, task-based segmentation metrics, and minimal bias in terms of task-based quantification performance for preclinical PET imaging.

Cross and local optimal avoidance of RIME algorithm: A segmentation study for COVID-19 X-ray images

Image segmentation is a crucial technique in analyzing X-ray medical images as it aids in uncovering relevant information concealed within a patient's body, a pivotal aspect of the diagnostic process. The effectiveness of computer-aided diagnosis systems largely depends on the accuracy of the image processing methods. In recent years, multi-threshold image segmentation methods have found widespread application in medical image analysis. Despite the effectiveness of some renowned methods for binary threshold segmentation, the field still faces challenges due to the high cost of threshold computation. Metaheuristic algorithms hold the potential to address this issue as they can produce sufficiently reasonable solutions with manageable computational overheads. While some similar methods have been proposed, the imbalance between exploration and exploitation results in instability as the number of thresholds increases. Consequently, these solutions suffer from reduced efficiency in computing thresholds. In this study, a variant of the latest RIME algorithm, termed SLCRIME, is proposed. This paper replaces the pseudo-random method with low-discrepancy Sobol sequences for solution initialization. Additionally, two methods aimed at avoiding local optima and promoting information exchange within the solution set are introduced, further enhancing its capability to search for optimal threshold sets for IS systems. Subsequently, a multi-threshold image segmentation model based on SLCRIME is proposed and applied to segment 6 COVID-19 X-ray images. In the experiments, SLCRIME is compared with 6 peer algorithms, and the results are evaluated using image segmentation accuracy, feature similarity index metrics (FSIM), peak signal-to-noise ratio (PSNR), and structural similarity index metrics (SSIM). The analysis indicates that SLCRIME achieves optimal thresholds at reasonable computational costs and outperforms other algorithms in terms of performance.

Secure Euclidean random distribution for patients’ magnetic resonance imaging privacy protection

Patients’ information and images transfer among medical institutes represent a major tool for delivering better healthcare services. However, privacy and security for healthcare information are big challenges in telemedicine. Evidently, even a small change in patients’ information might lead to wrong diagnosis. This paper suggests a new model for hiding patient information inside magnetic resonance imaging (MRI) cover image based on Euclidean distribution. Both least signification bit (LSB) and most signification bit (MSB) techniques are implemented for the physical hiding. A new method is proposed with a very high level of security information based on distributing the secret text in a random way on the cover image. Experimentally, the proposed method has high peak signal to noise ratio (PSNR), structural similarity index metric (SSIM) and reduced mean square error (MSE). Finally, the obtained results are compared with approaches in the last five years and found to be better by increasing the security for patient information for telemedicine.

Deep Learning for Daily 2‐m Temperature Downscaling

AbstractThis study proposes a novel method, which is a U‐shaped convolutional neural network that combines non‐local attention mechanisms, Res2net residual modules, and terrain information (UNR‐Net). The original U‐Net method and the linear regression (LR) method are conducted as benchmarks. Generally, the UNR‐Net has demonstrated promise in performing a 10× downscaling for daily 2‐m temperature over North China with lead times of 1–7 days and shows superiority to the U‐Net and LR methods. To be specific, U‐Net and UNR‐Net demonstrate higher Nash‐Sutcliffe Efficiency coefficient values compared to LR by 0.052 and 0.077, respectively. The corresponding improvements in pattern correlation coefficient are 0.013 and 0.016, while the root mean square error values are higher by 0.22 and 0.338, respectively. Additionally, the structural similarity index metric is higher by 0.033 and lower by 0.015. Furthermore, regions with significant errors are primarily distributed in complex terrain areas such as the Taihang Mountains, where UNR‐Net exhibits noticeable improvements. In addition, the 12 components‐based error decomposition method is proposed to analyze the error source of different models. Generally, the smallest errors are observed during the summer season and the sequence error component is proven to be the main source error of 2‐m temperature forecasts. Furthermore, UNR‐Net consistently demonstrates the lowest errors among all 12 error components. Therefore, combining the numerical weather prediction model and deep learning method is very promising in downscaling temperature forecasts and can be applied to routine forecasting of other atmospheric variables in the future.

Generation of tissues outside the field of view (FOV) of radiation therapy simulation imaging based on machine learning and patient body outline (PBO)

BackgroundIt is not unusual to see some parts of tissues are excluded in the field of view of CT simulation images. A typical mitigation is to avoid beams entering the missing body parts at the cost of sub-optimal planning.MethodsThis study is to solve the problem by developing 3 methods, (1) deep learning (DL) mechanism for missing tissue generation, (2) using patient body outline (PBO) based on surface imaging, and (3) hybrid method combining DL and PBO. The DL model was built upon a Globally and Locally Consistent Image Completion to learn features by Convolutional Neural Networks-based inpainting, based on Generative Adversarial Network. The database used comprised 10,005 CT training slices of 322 lung cancer patients and 166 CT evaluation test slices of 15 patients. CT images were from the publicly available database of the Cancer Imaging Archive. Since existing data were used PBOs were acquired from the CT images. For evaluation, Structural Similarity Index Metric (SSIM), Root Mean Square Error (RMSE) and Peak signal-to-noise ratio (PSNR) were evaluated. For dosimetric validation, dynamic conformal arc plans were made with the ground truth images and images generated by the proposed method. Gamma analysis was conducted at relatively strict criteria of 1%/1 mm (dose difference/distance to agreement) and 2%/2 mm under three dose thresholds of 1%, 10% and 50% of the maximum dose in the plans made on the ground truth image sets.ResultsThe average SSIM in generation part only was 0.06 at epoch 100 but reached 0.86 at epoch 1500. Accordingly, the average SSIM in the whole image also improved from 0.86 to 0.97. At epoch 1500, the average values of RMSE and PSNR in the whole image were 7.4 and 30.9, respectively. Gamma analysis showed excellent agreement with the hybrid method (equal to or higher than 96.6% of the mean of pass rates for all scenarios).ConclusionsIt was first demonstrated that missing tissues in simulation imaging could be generated with high similarity, and dosimetric limitation could be overcome. The benefit of this study can be significantly enlarged when MR-only simulation is considered.

A nonlinear total variation based computed tomography (CT) image reconstruction method using gradient reinforcement.

Compressed sensing-based reconstruction algorithms have been proven to be more successful than analytical or iterative methods for sparse computed tomography (CT) imaging by narrowing down the solution set thanks to its ability to seek a sparser solution. Total variation (TV), one of the most popular sparsifiers, exploits spatial continuity of features by restricting variation between two neighboring pixels in each direction as using partial derivatives. When the number of projections is much fewer than the one in conventional CT, which results in much less sampling rate than the minimum required one, TV may not provide satisfactory results. In this study, a new regularizer is proposed which seeks for a sparser solution by reinforcing the gradient of TV and empowering the spatial continuity of features. The experiments are done by using both analitical phantom and real human CT images and the results are compared with conventional, four-directional, and directional TV algorithms by using contrast-to-noise ratio (CNR), signal-to-noise ratio (SNR) and Structural Similarity Index (SSIM) metrics. Both quantitative and visual evaluations show that the proposed method is promising for sparse CT image reconstruction by reducing the background noise while preserving the features and edges.

Enhanced choroidal thickness, total choroidal area and choroidal vascularity index from deep‐learning generated OCT images

Aims/Purpose: Our goal is to enhance the visualization of the choroid in clinical standard spectral‐domain OCT (SDOCT) scans using a deep‐learning (DL) approach that uses matching swept‐source OCT (SSOCT). We aim to improve the measurement of the sub‐foveal choroidal thickness (SFCT), total choroidal area (TCA), and choroidal vascularity index (CVI) in SDOCT images.Methods: A total of 105 350 SDOCT and SSOCT B‐scan images (Zeiss Cirrus 5000 and Zeiss PlexElite) were used to develop the DL model. The data set included B‐scans from healthy (238 eye pairs from 155 patients) and glaucoma (192 eye pairs from 122 patients) subjects. The DL model learned deep anatomical features from SSOCT scans and generated enhanced SDOCT images. The peak signal‐to‐noise ratio (PSNR) and structural similarity index metric (SSIM) were used to assess the quality of generated images. In addition, we compared the anatomical parameters derived from the generated and ground‐truth SSOCT images, including SVCT, TCA and CVI values.Results: We tested our method using 20 580 B‐scan image pairs from 84 eyes. The DL‐generated images effectively preserved the anatomical structure of the retina layers and improved the visualization of the choroid. The enhanced SDOCT images had higher image quality than the original SDOCT images, as demonstrated by the higher PSNR (31 dB vs. 18 dB) and SSIM values (3.4 times higher SSIM than the original SDOCT images). SVCT, TCA, and CVI measurements from the DL‐generated SDOCT images showed strong correlations with corresponding measurements using SSOCT with high Pearson's coefficients (0.93, 0.99, and 0.93), high intra‐class correlation indices (0.96, 0.99 and 0.96), and high coefficient of determination r2 values (0.85, 0.98 and 0.86).Conclusions: Our DL model enhances the visibility of the choroid in images, surpassing the capabilities of standard clinical SDOCT images. As a result, accurate measurement of SVCT, TCA and CVI, which were previously limited due to imaging depth constraints of SDOCT, becomes possible. This technology opens up new possibilities for utilizing affordable SDOCT devices to study the choroid in healthy and pathological conditions.

Scrupulous SCGAN Framework for Recognition of Restored Images with Caffe based PCA Filtration

Computer vision enables to detect many objects in any scenario which helps in various real time application but still face recognition and detection remains a tedious process due to the low resolution, blurriness, noise, diverse pose and expression and occlusions. This proposal develops a novel scrupulous Standardized Convolute Generative Adversarial Network (SCGAN) framework for performing accurate face recognition automatically by restoring the occluded region including blind face restoration. Initially, a scrupulous image refining technique is utilised to offer the appropriate input to the network in the subsequent process. Following the pre-processing stage, a Caffe based Principle Component Analysis (PCA) filtration is conducted which uses convolutional architecture for fast feature embedding that collects spatial information and significant differentiating characteristics to counteract the loss of information existing in pooling operations. Then a filtration method identifies the specific match of the face based on the extracted features, creating uncorrelated variables that optimise variance across time while minimising information loss. To handle all the diversification occurring in the image and accurately recognise the face with occlusion in any part of the face, a novel Standardized Convolute GAN network is used to restore the image and recognise the face using novel Generative Adversarial Network (GAN) networks are modelled. This GAN ensures the normal distribution along with parametric optimization contributing to the high performance with accuracy of 96.05% and Peak Signal to Noise Ratio (PSNR) of 18 and Structural Similarity Index Metric (SSIM) of 98% for restored face recognition. Thus, the performance of the framework based on properly recognizing the face from the generated images is evaluated and discussed.

Scrupulous SCGAN Framework for Recognition of Restored Images with Caffe based PCA Filtration

Computer vision enables to detect many objects in any scenario which helps in various real time application but still face recognition and detection remains a tedious process due to the low resolution, blurriness, noise, diverse pose and expression and occlusions. This proposal develops a novel scrupulous Standardized Convolute Generative Adversarial Network (SCGAN) framework for performing accurate face recognition automatically by restoring the occluded region including blind face restoration. Initially, a scrupulous image refining technique is utilised to offer the appropriate input to the network in the subsequent process. Following the pre-processing stage, a Caffe based Principle Component Analysis (PCA) filtration is conducted which uses convolutional architecture for fast feature embedding that collects spatial information and significant differentiating characteristics to counteract the loss of information existing in pooling operations. Then a filtration method identifies the specific match of the face based on the extracted features, creating uncorrelated variables that optimise variance across time while minimising information loss. To handle all the diversification occurring in the image and accurately recognise the face with occlusion in any part of the face, a novel Standardized Convolute GAN network is used to restore the image and recognise the face using novel Generative Adversarial Network (GAN) networks are modelled. This GAN ensures the normal distribution along with parametric optimization contributing to the high performance with accuracy of 96.05% and Peak Signal to Noise Ratio (PSNR) of 18 and Structural Similarity Index Metric (SSIM) of 98% for restored face recognition. Thus, the performance of the framework based on properly recognizing the face from the generated images is evaluated and discussed.

Regularized full waveform inversion for low frequency ultrasound tomography with a structural similarity EIT prior

In previous work by Rueter et al., low frequency (10–750 kHz) ultrasound was shown to penetrate the lung, motivating its use as a nonionizing tomographic technique for pulmonary monitoring. Here, we present a method for regularized full waveform inversion for low-frequency tomographic ultrasound data. A novel structural similarity index metric (SSIM)-based regularization term is introduced that compares the structural correlation of the current sound speed iterate to a prior reconstruction computed by electrical impedance tomography (EIT). Full waveform reconstructions of sound speeds from numerically simulated low frequency ultrasound data with 0.1% additive Gaussian noise are computed, and the results are compared using Tikhonov regularization, total variation regularization, and both terms combined with the SSIM-EIT regularization term. The EIT reconstruction was computed from simulated voltage data on the same phantom using one step of a Newton-Raphson method with a high-pass Gaussian filter as a regularizer. Reconstructions including the SSIM-EIT regularization term converged fastest, and an adaptive regularization parameter provided the most accurate reconstructions. The method is then iterated by computing an EIT reconstruction using the USCT result as a prior, and a subsequent USCT reconstruction is computed using the SSIM-EIT regularization term with the updated EIT reconstruction.

Weighted and Well-Balanced Nonlinear TV-Based Time-Dependent Model for Image Denoising

The partial differential equation (PDE)-based models are widely used to remove additive Gaussian white noise and preserve edges, and one of the most widely used methods is the total variation denoising algorithm. Total variation (TV) denoising algorithm-based time-dependent models have seen considerable success in the field of image-denoising and edge detection. TV denoising algorithm is based on that signals with spurious detail have a high total variation and reduction of unwanted signals to achieve noise-free images. It is a constrained optimization-type algorithm. The Lagrange multiplier and gradient descent method are used to solve the TV algorithm to reach the PDE-based time dependent model. To eliminate additive noise and preserve edges, we investigate a class of weighted time-dependent model in this study. The proposed method is investigated in a well-balanced flow form that extends the time-dependent model with an adaptive fidelity element. Adaptive function is fusing into the regularization term of the classical time-dependent model which successfully enhances the intensity of the regularizer function. We maintain the ability of the time-dependent model without any oscillation effects. Furthermore, we want to prove the viscosity solution of our weighted and well balanced time-dependent model, demonstrating its existence and uniqueness. The finite difference method is applied to discretize the nonlinear time-dependent models. The numerical results are expressed as a statistic known as the peak signal-to-noise ratio (PSNR) and structural similarity index metric (SSIM). Numerical experiments demonstrate that the proposed model yields good performance compared with the previous time-dependent model.

A Multiscale Deep Encoder–Decoder with Phase Congruency Algorithm Based on Deep Learning for Improving Diagnostic Ultrasound Image Quality

Ultrasound imaging is widely used as a noninvasive lesion detection method in diagnostic medicine. Improving the quality of these ultrasound images is very important for accurate diagnosis, and deep learning-based algorithms have gained significant attention. This study proposes a multiscale deep encoder–decoder with phase congruency (MSDEPC) algorithm based on deep learning to improve the quality of diagnostic ultrasound images. The MSDEPC algorithm included low-resolution (LR) images and edges as inputs and constructed a multiscale convolution and deconvolution network. Simulations were conducted using the Field 2 program, and data from real experimental research were obtained using five clinical datasets containing images of the carotid artery, liver hemangiomas, breast malignancy, thyroid carcinomas, and obstetric nuchal translucency. LR images, bicubic interpolation, and super-resolution convolutional neural networks (SRCNNs) were modeled as comparison groups. Through visual assessment, the image processed using the MSDEPC was the clearest, and the lesions were clearly distinguished. The structural similarity index metric (SSIM) value of the simulated ultrasound image using the MSDEPC algorithm improved by approximately 38.84% compared to LR. In addition, the peak signal-to-noise ratio (PSNR) and SSIM values of clinical ultrasound images using the MSDEPC algorithm improved by approximately 2.33 times and 88.58%, respectively, compared to LR. In conclusion, the MSDEPC algorithm is expected to significantly improve the spatial resolution of ultrasound images.

Combining variational mode decomposition with regularisation techniques to denoise MRI data

In this paper, we propose a novel method for removing noise from MRI data by exploiting regularisation techniques combined with variational mode decomposition. Variational mode decomposition is a new decomposition technique for sparse decomposition of a 1D or 2D signal into a set of modes. In turn, regularisation is a method that can translate the ill-posed problem (e.g., image denoising) into a well-posed problem.The proposed method aims to remove the noise from the image in two steps. In the first step, the MR imaging data are decomposed by the 2D variational mode decomposition algorithm. In the second step, for effective suppression of Rician noise from MRI data, we used the fused lasso signal approximator with all modes acquired from the medical scan.The performance of the proposed approach was compared with state-of-the-art reference methods based on different metrics, that is, the peak signal-to-noise ratio, the structural similarity index metrics, the high-frequency error norm, the quality index based on local variance, and the sharpness index. The experiments were performed on the basis of both simulated and real images. The presented results prove the high denoising performance of the proposed algorithm; particularly under heavy noise conditions.

Robust Image Steganography Based on Hybrid Edge Detection

Steganography is a technique for hiding digital messages into other digital media, such as images, audio, video, and others so that the messages can be disguised and not directly visible to the human vision. There are two kinds of steganography by domain, i.e., spatial domain and frequency domain [7]. Least Significant Bit (LSB) is a popular method in spatial domains [8]. LSB is not a new method. However, this method has many advantages, such as simple algorithm and the quality of imperceptibility of relatively good stego-image [6, 9]. This makes the LSB still open for more development and further research. This paper presents the image hiding technique using Least Significant Bit (LSB) steganography based on hybrid edge detection that maximized the data embedding capacity of the cover image. The performance of the system is evaluated for hybrid edge detection using pairs of various edge detection techniques such as Canny, Kirsch, Sobel, and Prewitt. The results of the proposed steganography approach are estimated for different payload capacities based on Mean Square Error (MSE), Peak Signal to Noise Ratio (PSNR), Structural Similarity Index Metrics (SSIM), and Universal Image Quality Index (UQI). It is examined that the proposed approach performs better than the existing state of arts for image steganography.

Performance analysis of modified wavelet difference reduction methods in image compression and transmission

The wavelet difference reduction (WDR) method, a variant of run-length coding, finds its significance in data transmission applications. Over time, numerous enhanced iterations of WDR methods have emerged. Notably, the Adaptive Scalable WDR method exhibits superior coding gains, as evidenced by the peak signal-to-noise ratio (PSNR) and structural similarity index metric (SSIM), when compared to its predecessors. This paper conducts an exhaustive examination, encompassing both coding performance and time complexity, of various WDR methods vis-à-vis the conventional image compression algorithm SPIHT. Furthermore, it delves into the performance assessment of diverse coding techniques in the realm of encoding arbitrary-shaped objects. The analysis underscores that modified WDR variants demonstrate remarkable prowess in compression, rendering them invaluable for rapid transmission in bandwidth-constrained networks. To substantiate these findings, coding results (measured in terms of PSNR) are derived from the application of these algorithms to standard test images, MRI images, and video still images. The results reveal coding gains ranging from 0.5 dB to 1 dB for regular resolution images and a substantial 2 dB to 12 dB for scalable resolution scenarios, in comparison to traditional coding approaches. Consequently, this analysis underscores the convenience and superiority of modified WDR methods, not only for still images but also for encoding and transmitting arbitrary-shaped objects.

Residual Attention Mechanism for Remote Sensing Target Hiding

In this paper, we investigate deep-learning-based image inpainting techniques for emergency remote sensing mapping. Image inpainting can generate fabricated targets to conceal real-world private structures and ensure informational privacy. However, casual inpainting outputs may seem incongruous within original contexts. In addition, the residuals of original targets may persist in the hiding results. A Residual Attention Target-Hiding (RATH) model has been proposed to address these limitations for remote sensing target hiding. The RATH model introduces the residual attention mechanism to replace gated convolutions, thereby reducing parameters, mitigating gradient issues, and learning the distribution of targets present in the original images. Furthermore, this paper modifies the fusion module in the contextual attention layer to enlarge the fusion patch size. We extend the edge-guided function to preserve the original target information and confound viewers. Ablation studies on an open dataset proved the efficiency of RATH for image inpainting and target hiding. RATH had the highest similarity, with a 90.44% structural similarity index metric (SSIM), for edge-guided target hiding. The training parameters had 1M fewer values than gated convolution (Gated Conv). Finally, we present two automated target-hiding techniques that integrate semantic segmentation with direct target hiding or edge-guided synthesis for remote sensing mapping applications.

Assessment of Narrow Band Imaging Algorithm for Video Capsule Endoscopy Based on Decorrelated Color Space for Esophageal Cancer.

Video capsule endoscopy (VCE) is increasingly used to decrease discomfort among patients owing to its small size. However, VCE has a major drawback of not having narrow band imaging (NBI) functionality. The current VCE has the traditional white light imaging (WLI) only, which has poor performance in the computer-aided detection (CAD) of different types of cancer compared to NBI. Specific cancers, such as esophageal cancer (EC), do not exhibit any early biomarkers, making their early detection difficult. In most cases, the symptoms are unnoticeable, and EC is diagnosed only in later stages, making its 5-year survival rate below 20% on average. NBI filters provide particular wavelengths that increase the contrast and enhance certain features of the mucosa, thereby enabling early identification of EC. However, VCE does not have a slot for NBI functionality because its size cannot be increased. Hence, NBI image conversion from WLI can presently only be achieved in post-processing. In this study, a complete arithmetic assessment of the decorrelated color space was conducted to generate NBI images from WLI images for VCE of the esophagus. Three parameters, structural similarity index metric (SSIM), entropy, and peak-signal-to-noise ratio (PSNR), were used to assess the simulated NBI images. Results show the good performance of the NBI image reproduction method with SSIM, entropy difference, and PSNR values of 93.215%, 4.360, and 28.064 dB, respectively.

Advanced Image Steganography Using a U-Net-Based Architecture with Multi-Scale Fusion and Perceptual Loss

Image-to-image steganography refers to the practice of hiding secret image within a cover image, serving as a crucial technique for secure communication and data protection. Existing image-to-image generative adversarial network-based steganographic methods for image hiding demonstrate a high embedding capacity. However, there is still significant room for improvement in terms of the quality of the stego images and the extracted secret images. In this study, we propose an architecture for inconspicuously hiding an image within the Y channel of another image, leveraging a U-Net network and a multi-scale fusion ExtractionBlock. The network is jointly trained using a loss function combining Perceptual Path Length (PPL) and Mean Square Error (MSE). The proposed network is trained and tested on two datasets, Labeled Faces in the Wild and Pascal visual object classes. Experimental results demonstrate that the model not only achieves high invisibility and significant hiding capacity (8 bits per pixel) without altering the color information of the cover image but also exhibits strong generalization ability. Additionally, we introduce the Modified Multi-Image Similarity Metric (MMISM), which integrates the Peak Signal-to-Noise Ratio (PSNR) and Structural Similarity Index Metric (SSIM) values of images, to comprehensively evaluate the network’s hiding and extraction capabilities.

A Huffman code LSB based image steganography technique using multi-level encryption and achromatic component of an image

In the recent couple of years, due to the accelerated popularity of the internet, various organizations such as government offices, military, private companies, etc. use different transferring methods for exchanging their information. The Internet has various benefits and some demerits, but the primary bad mark is security of information transmission over an unreliable network, and widely uses of images. So, Steganography is the state of the art of implanting a message in the cover objects, that nobody can suspect or identify it. Therefore, in the field of cover steganography, it is very critical to track down a mechanism for concealing data by utilizing different blends of compression strategies. Amplifying the payload limit, and robustness, and working on the visual quality are the vital factors of this research to make a reliable mechanism. Different cover steganography research strategies have been recommended, and each adores its benefits and impediments but there is a need to foster some better cover steganography implements to accomplish dependability between the essential model of cover steganography. To handle these issues, in this paper we proposed a method in view of Huffman code, Least Significant Bits (LSB) based cover steganography utilizing Multi-Level Encryption (MLE) and colorless part (HC-LSBIS-MLE-AC) of the picture. It also used different substitution and flicking concepts, MLE, Magic matrix, and achromatic concepts for proving the proficiency, and significance of the method. The algorithm was also statistically investigated based on some Statistical Assessment Metrics (SAM) such as Mean Square Error (MSE), Peak Signal Noise Ratio (PSNR), Normalized Cross Correlation (NCC), Structural Similarity Index Metric (SSIM), etc. and different perspectives. The observational outcomes show the likelihood of the proposed algorithm and the capacity to give unwavering quality between security, payload, perception, computation, and temper protection.

Remote Sensing Image Dehazing through an Unsupervised Generative Adversarial Network.

The degradation of visual quality in remote sensing images caused by haze presents significant challenges in interpreting and extracting essential information. To effectively mitigate the impact of haze on image quality, we propose an unsupervised generative adversarial network specifically designed for remote sensing image dehazing. This network includes two generators with identical structures and two discriminators with identical structures. One generator is focused on image dehazing, while the other generates images with added haze. The two discriminators are responsible for distinguishing whether an image is real or generated. The generator, employing an encoder-decoder architecture, is designed based on the proposed multi-scale feature-extraction modules and attention modules. The proposed multi-scale feature-extraction module, comprising three distinct branches, aims to extract features with varying receptive fields. Each branch comprises dilated convolutions and attention modules. The proposed attention module includes both channel and spatial attention components. It guides the feature-extraction network to emphasize haze and texture within the remote sensing image. For enhanced generator performance, a multi-scale discriminator is also designed with three branches. Furthermore, an improved loss function is introduced by incorporating color-constancy loss into the conventional loss framework. In comparison to state-of-the-art methods, the proposed approach achieves the highest peak signal-to-noise ratio and structural similarity index metrics. These results convincingly demonstrate the superior performance of the proposed method in effectively removing haze from remote sensing images.