Strong Solvent Dependence Research Articles

Hydrogen bond assisted reactivity of Ylidineketonitriles with 1° amines: A chemoselective synthesis of 2-pyridone and 2-aminopyridine derivatives

Ylidineketonitrile 2 with chlorodifluoromethyl (A = Cl) demonstrated a strong solvent dependence reaction with primary amines to form either 1-N-alkylated-3,5-disubstituted-2-pyridones or 2-N-alkylated-3, 5-trisubstituted pyridines. The methodology was tested for its scope with primary amines and synthesized 29 derivatives in good to excellent yield. Ylidineketonitrile 2e preferrentially forms pyridone derivatives in the majority of the solvents screened except trifluoroethanol, where chemoselective formation of 2-aminopyridine derivatives was observed.

Fluorosolvatochromic Behavior of 2,3‐Naphthalimides Expanded by Double Fusion with Benzothiophene and Benzofuran Units

AbstractAs new polycyclic aromatic hydrocarbons (PAHs) containing an imide group, we designed and synthesized 2,3‐naphthalimide fused with benzothiophene 1 or benzofuran 2. 1 and 2 have a push‐pull structure attributed to the imide group and the electron‐donating heterocyclic moieties, indicated that 1 and 2 play as a fluorosolvatochromic dye. 1 and 2 were synthesized in 3‐steps. The absorption and fluorescence spectra were measured in twelve different solvents. The absorption spectra of 1 and 2 showed a slight solvent dependence. On the other hand, a strong solvent dependence was observed in the fluorescence spectra of 1 and 2, that is, fluorosolvatochromism. The plots of the emission maximum versus the solvent polarity parameter ET(30) for 1 and 2 exhibited a good linear correlation. Multiple linear regression analysis using Catalán scale suggested that the fluorescence behavior of 1 and 2 is influenced by the acidity and dipolarity of the solvents. The changes in the dipole moment between the ground and excited states estimated by the Lippert‐Mataga equation were 7.6 D for 1 and 7.2 D for 2.

Limitations of non-polarizable force fields in describing anion binding poses in non-polar synthetic hosts.

Transmembrane anion transport by synthetic ionophores has received increasing interest not only because of its relevance for understanding endogenous anion transport, but also because of potential implications for therapeutic routes in disease states where chloride transport is impaired. Computational studies can shed light on the binding recognition process and can deepen our mechanistic understanding of them. However, the ability of molecular mechanics methods to properly capture solvation and binding properties of anions is known to be challenging. Consequently, polarizable models have been suggested to improve the accuracy of such calculations. In this study, we calculate binding free energies for different anions to the synthetic ionophore, biotin[6]uril hexamethyl ester in acetonitrile and to biotin[6]uril hexaacid in water by employing non-polarizable and polarizable force fields. Anion binding shows strong solvent dependency consistent with experimental studies. In water, the binding strengths are iodide > bromide > chloride, and reversed in acetonitrile. These trends are well captured by both classes of force fields. However, the free energy profiles obtained from potential of mean force calculations and preferred binding positions of anions depend on the treatment of electrostatics. Results from simulations using the AMOEBA force-field, which recapitulate the observed binding positions, suggest strong effects from multipoles dominate with a smaller contribution from polarization. The oxidation status of the macrocycle was also found to influence anion recognition in water. Overall, these results have implications for the understanding of anion host interactions not just in synthetic ionophores, but also in narrow cavities of biological ion channels.

Influence of particle size of flame-synthesized carbon nanoparticles on band gap and photoluminescence properties.

Band gap and photoluminescence (PL) properties were investigated for flame-synthesized carbon nanoparticles (CNPs) of four different particle size distributions. The particles were collected by varying the flow rates of fuel and oxidizer in a controllable co-flow diffusion flame. The results indicated the possibility of both direct and indirect band gaps in the synthesized CNPs. The band gaps were found to increase with a decrease in the particle size, thereby exhibiting the quantum confinement effect. The PL properties observed with the pure powdered sample showed strong emission in the green region. However, for samples dispersed in isopropyl alcohol, the emission wavelength shifts towards the blue region, showing strong solvent dependence. The particle size of CNPs, however, only affects the emission peak intensities.

Novel red light-emitting two-photon absorption compounds with large Stokes shifts for living cell imaging

Three novel donor-π-acceptor two-photon absorption compounds (1PZPy, 2PZIm, 3CZPy) bearing the 10-butyl-10H-phenothiazine (9-butyl-9H-carbazole) donor, the pyridinium (benzimidazolium) acceptor, and the 2,5-divinylthiophene π-bridge were synthesized and fully characterized by 1H NMR, 13C NMR, FT-IR, and HRMS. The linear and nonlinear photophysical properties were systematically investigated. Their absorption properties show a strong solvent dependence, while the emission properties are nearly independent of solvent polarity. All of them possess large Stokes shifts (Δλ=149–190 nm in H2O). 1PZPy and 3CZPy exhibit red fluorescence emission centered at about 635 and 660 nm, respectively. The two-photon absorption cross-sections measured by the open aperture Z-scan technique are determined to be 486 (1PZPy), 601 (2PZIm), and 753 GM (3CZPy) in DMF. The density functional theory calculations were further carried out to reveal their electronic structures. All the target compounds are verified to have low cytotoxicity in the working solution and good capability for one- and two-photon excitation fluorescence imaging, suggesting their potential application in bioimaging. Moreover, they show the organelle targeting ability in living cells with the high Pearson’s coefficients above 0.94 for the endoplasmic reticulum.

An ab initio study of the effect of hydration on the vibrational spectrum of hydrogen selenate ion

The geometries, energies, and vibrational frequencies of various isomers of HSeO4-(H2O)n, n = 0 – 6 are calculated at various levels up to MP2/6–31+G*. These properties are studied as a function of increasing cluster size. The experimental and theoretical vibrational spectra are compared. The calculations help to predict the full-widths at half-height and a strong temperature and solvent dependence of the Se-O(H) stretching and SeOH bending vibration.

Cobalt-Catalyzed Cyclization of Unsaturated N-Acyl Sulfonamides: a Diverted Mukaiyama Hydration Reaction.

The cycloisomerization of β-, γ-, and δ-unsaturated N-acyl sulfonamides to N-sulfonyl lactams and imidates is reported. This transformation is effected in the presence of a CoIII(salen) catalyst using t-BuOOH or air as the oxidant. The method shows good functional group tolerance (alkyl, aryl, heteroaryl, ether, N-Boc) and furnishes an underexplored class of cyclic building blocks. The strong solvent dependence of the transformation is investigated, and the synthetic versatility of the N-sulfonyl imidate product class is highlighted.

Human peripheral blood mononuclear cells targeted multidimensional switch for selective detection of HSO3− anion

A new ratiometric π-conjugated luminophore with donor-acceptor (D- π- A) network CM {(E)-2-(4-(2-(9-butyl-9H-carbazol-3-yl)vinyl)benzylidine)malononitrile} has been synthesized by malononitrile conjugated carbazole dye with an intervening p-styryl spacer. Here, p-styryl conjugated malononitrile is used as a recognition site for the detection of HSO3− with a fast response time (within 50 s). In a mixed aqueous solution, CM reacts with HSO3− to give a new product 1-(9-butyl-9H-carbazol-3-yl)-2-(4-(2, 2-dicyanovinyl)phenyl)ethane-1-sulfonic acid. The probe exhibits positive solvatofluorochromism with solid state red fluorescence. The restriction of intermolecular rotation of p-styryl conjugated malononitrile unit enhances the typical solid state fluorescence properties. The probe (CM and its corresponding aldehyde CA) also demonstrates a strong solvent dependence yielding blue to green to pink and even red fluorescence in commonly used organic solvents like n-hexane, toluene, diethyl ether (DEE), THF, DCM, Dioxane, CH3CN and MeOH. The chemodosimetric approach of HSO3− selectively takes place at the olefinic carbon exhibiting a prominent chromogenic as well as ratiometric fluorescence change with a 147 nm blue-shift in the fluorescence spectrum. CM can detect HSO3− as low as 1.21 × 10−8 M. Moreover, the CM can be successfully applied to detect intrinsically generated intracellular HSO3− in human peripheral blood mononuclear cells (PBMCs). CM has shown sharp intensities (2628 ± 511.8) when the cells are HSO3− untreated. At green channel (at 486 nm) almost negligible fluorescence intensities are found (423 ± 127.5) for HSO3− untreated samples. However, the green fluorescence (2863 ± 427.5) increases significantly (p < 0.05), and simultaneously the red fluorescence gets significantly (p < 0.05) diminished (515 ± 113.2) after addition of HSO3−. The CM has been effectively utilized for evaluating the bisulfite ions in food samples as well. The concentrations of HSO3− in diluted sugar samples have been determined with the recovery of 97.6–9.12%.

2,3-(Dibenzimidazol-2-yl)quinoxalines: Unexpected Dynamical Effect on Steady-State Electronic Absorption Spectra.

We report on the electronic absorption spectra, conformational behavior, and intra- and intermolecular hydrogen bonds of 2,3-(dibenzimidazol-2-yl)-quinoxaline (DBIQ). The experimentally found strong solvent dependence of the absorption spectra of DBIQ solutions cannot be assigned to electronic excitations of the equilibrium ground-state DBIQ structure. Extended consideration including the nonequilibrium structures within the framework of ab initio molecular dynamics (MD) revealed the importance of torsion molecular motions not covered by the static case. The strong impact of solute-solvent hydrogen bonding on stabilization of these nonequilibrium structures and on conformational composition of DBIQ was demonstrated. A presence of twisted nonplanar geometries along the whole MD trajectory was shown to drastically influence not only energies but also characters of electronic excitations, resulting in a change of local π-π* character in a solution of 1,2-dichloroethane to charge-transfer character in polar dimethylsulfoxide.

Solvatochromic and Ligand Effects in Ultrafast Intramolecular Electron Transfer in Fe-based Molecular Photosensitizers

Metal-to-ligand charge-transfer (MLCT) excited state lifetimes of [Fe(CN)4(2,2’-bipyridine)]2- and [Fe(CN)4(2,3-bis(2-pyridyl)pyrazine)]2-exhibit strong solvent and ligand dependence. We conclude that these effects can be described with Marcus-like model where changes in the MLCT energy correspond directly to the changes in the electron transfer driving force and all the other factors (e.g. reorganization energy) can be considered constant.

Label-Free Dynamic Detection of Single-Molecule Nucleophilic-Substitution Reactions.

The mechanisms of chemical reactions, including the transformation pathways of the electronic and geometric structures of molecules, are crucial for comprehending the essence and developing new chemistry. However, it is extremely difficult to realize at the single-molecule level. Here, we report a single-molecule approach capable of electrically probing stochastic fluctuations under equilibrium conditions and elucidating time trajectories of single species in non-equilibrated systems. Through molecular engineering, a single molecular wire containing a functional center of 9-phenyl-9-fluorenol was covalently wired into nanogapped graphene electrodes to form stable single-molecule junctions. Both experimental and theoretical studies consistently demonstrate and interpret the direct measurement of the formation dynamics of individual carbocation intermediates with a strong solvent dependence in a nucleophilic-substitution reaction. We also show the kinetic process of competitive transitions between acetate and bromide species, which is inevitable through a carbocation intermediate, confirming the classical mechanism. This unique method creates plenty of opportunities for carrying out single-molecule dynamics or biophysics investigations in broad fields beyond reaction chemistry through molecular design and engineering.

Solvent Effects on the Actinic Step of Donor-Acceptor Stenhouse Adduct Photoswitching.

Donor–acceptor Stenhouse adducts (DASAs) are negative photochromes that switch with visible light and are highly promising for applications ranging from smart materials to biological systems. However, the strong solvent dependence of the photoswitching kinetics limits their application. The nature of the photoswitching mechanism in different solvents is key for addressing the solvatochromism of DASAs, but as yet has remained elusive. Here, we employ spectroscopic analyses and TD‐DFT calculations to reveal changing solvatochromic shifts and energies of the species involved in DASA photoswitching. Time‐resolved visible pump‐probe spectroscopy suggests that the primary photochemical step remains the same, irrespective of the polarity and protic nature of the solvent. Disentangling the different factors determining the solvent‐dependence of DASA photoswitching, presented here, is crucial for the rational development of applications in a wide range of different media.

Solvent Effects on the Actinic Step of Donor–Acceptor Stenhouse Adduct Photoswitching

AbstractDonor–acceptor Stenhouse adducts (DASAs) are negative photochromes that switch with visible light and are highly promising for applications ranging from smart materials to biological systems. However, the strong solvent dependence of the photoswitching kinetics limits their application. The nature of the photoswitching mechanism in different solvents is key for addressing the solvatochromism of DASAs, but as yet has remained elusive. Here, we employ spectroscopic analyses and TD‐DFT calculations to reveal changing solvatochromic shifts and energies of the species involved in DASA photoswitching. Time‐resolved visible pump‐probe spectroscopy suggests that the primary photochemical step remains the same, irrespective of the polarity and protic nature of the solvent. Disentangling the different factors determining the solvent‐dependence of DASA photoswitching, presented here, is crucial for the rational development of applications in a wide range of different media.

Solvation structure around ruthenium(II) tris(bipyridine) in lithium halide solutions.

The solvation of the ruthenium(II) tris(bipyridine) ion ([Ru(bpy)3]2+) is investigated with molecular dynamics simulations of lithium halide solutions in polar solvents. The anion distribution around the [Ru(bpy)3]2+ complex exhibits a strong solvent dependence. In aqueous solution, the iodide ion forms a solvent shared complex with [Ru(bpy)3]2+, but not in the other solvents. Between Cl– and [Ru(bpy)3]2+, the strong hydration of the chloride ion results in a solvent separated complex where more than one solvent molecule separates the anion from the metal center. Hence, tailored solvation properties in electrolytes is a route to influence ion-ion interactions and related electron transfer processes.

Isomerization of Ninhydrin–Heterocyclic Ketene Aminal Adducts: Kinetic versus Thermodynamic Control, Solvent Dependency and Mechanism

AbstractNinhydrin and heterocyclic ketene aminals (HKAs) are versatile building blocks in organic chemistry. Reactions of ninhydrin with HKAs initially produced the kinetic products indeno[1,2‐b]pyrrol‐4(1H)‐one derivatives, which could further isomerize to thermodynamic counterparts indeno[2,1‐b]pyrrol‐8(1H)‐ones. The isomerization showed a strong solvent dependency and occurred through a decomposition–reconstruction pathway. This is the first example of isomerization of ninhydrin‐constructed products. The conversion between kinetic and thermodynamic control may be applicable to similar reactions involving ninhydrin or HKAs.

Ultrafast Structural Dynamics of Cu(I)-Bicinchoninic Acid and Their Implications for Solar Energy Applications

In this study, ultrafast optical transient absorption and X-ray transient absorption (XTA) spectroscopy are used to probe the excited-state dynamics and structural evolution of copper(I) bicinchoninic acid ([Cu(I)(BCA)2](+)), which has similar but less frequently studied biquinoline-based ligands compared to phenanthroline-based complexes. The optical transient absorption measurements performed on the complex in a series of polar protic solvents demonstrate a strong solvent dependency for the excited lifetime, which ranges from approximately 40 ps in water to over 300 ps in 2-methoxyethanol. The XTA experiments showed a reduction of the prominent 1s → 4pz edge peak in the excited-state X-ray absorption near-edge structure (XANES) spectrum, which is indicative of an interaction with a fifth ligand, most likely the solvent. Analysis of the extended X-ray absorption fine structure (EXAFS) spectrum shows a shortening of the metal-ligand bond in the excited state and an increase in the coordination number for the Cu(II) metal center. A flattened structure is supported by DFT calculations that show that the system relaxes into a flattened geometry with a lowest-energy triplet state that has a dipole-forbidden transition to the ground state. While the short excited-state lifetime relative to previously studied Cu(I) diimine complexes could be attributed to this dark triplet state, the strong solvent dependency and the reduction of the 1s → 4pz peak in the XTA data suggest that solvent interaction could also play a role. This detailed study of the dynamics in different solvents provides guidance for modulating excited-state pathways and lifetimes through structural factors such as solvent accessibility to fulfill the excited-state property requirements for efficient light harvesting and electron injection.

Synthesis, reaction, and optical properties of cyclic oligomers bearing 9,10-diphenylanthracene based on an aromatic tertiary amide unit

Novel cyclic aromatic amide oligomers containing highly fluorescent 9,10-diphenylanthracene units were prepared by condensation of a monomer with amino and ester functional groups using lithium bis(trimethylsilyl)amide. The cyclic trimer (C3A, 40%) and tetramer (C4A, 8%) were isolated using preparative gel permeation chromatography. Some of the aromatic proton signals derived from anthracene were observed in the upfield region (6.96–6.87 ppm) in the 1H nuclear magnetic resonance spectrum of C3A. X-ray crystallographic analysis indicated that three anthracene moieties are inclined with respect to the cyclic skeleton and partly overlap each other. The fluorescence peak maximum of C3A (438 nm) showed a small red-shift compared with that of an acyclic model compound (425 nm). Reduction of the amide carbonyl group in C3A gave the cyclic trimer HC3A, which has a tertiary amine unit. The fluorescence peak maximum of HC3A (489 nm) was largely red-shifted from that of C3A and exhibited strong solvent dependence. A linear correlation was observed between the Stokes shift (Δν), ranging from 2981 to 6646 cm−1, and the Reichardt's solvent polarity parameter [ET(30)].

Competition between excited state proton and OH(-) transport via a short water wire: solvent effects open the gate.

We investigate the acid-base proton exchange reaction in a microsolvated bifunctional chromophore by means of quantum chemical calculations. The UV/vis spectroscopy shows that equilibrium of the keto- and enol-forms in the electronic ground state is shifted to the keto conformation in the excited state. A previously unknown mechanism involving a hydroxide ion transport along a short water wire is characterized energetically, which turns out to be competitive with the commonly assumed proton transport. Both mechanisms are shown to have a concerted character, as opposed to a step-wise mechanism. The alternative mechanism of a hydrogen atom transport is critically examined, and evidence for strong solvent dependence is presented. Specifically, we observe electrostatic destabilization of the corresponding πσ* state by the aqueous solvent. As a consequence, no conical intersections are found along the reaction pathway.

Syntheses, Structures, and Comparison of the Photophysical Properties of Cyclometalated Iridium Complexes Containing the Isomeric 1- and 2-(2′-pyridyl)pyrene Ligands

Two cyclometalated iridium complexes of the form IrL2(acac) have been synthesized, where L is either of the isomeric ligands 1- or 2-(2'-pyridyl)pyrene (1-pypyrH or 2-pypyrH). These complexes have been investigated in terms of their photophysical behavior and, although both complexes exhibit similar pure radiative lifetimes, they have substantially different observed phosphorescence lifetimes and quantum yields. Moreover, the observed phosphorescence lifetimes and quantum yields of both complexes, as well as the absorption spectra of Ir(1-pypyr)2(acac), exhibit a strong solvent dependence, while there is essentially no solvatochromism in the emission spectra of either complex. Single-crystal X-ray diffraction studies of both ligands and both iridium complexes reveal structural differences between the two isomers. The crystal structures of the ligands, supported by density functional theory (DFT) modeling, show that a twist is present between the pyridyl and pyrenyl rings in 1-pypyrH, but is absent in 2-pypyrH, which leads to the requirement for more unusual cyclometalation conditions for 1-pypyrH. Furthermore, it is suggested that the strained structure of Ir(1-pypyr)2(acac) provides access to a facile nonradiative excited state deactivation pathway, which leads to the higher value of knr for this isomer. DFT, TD-DFT, and ΔSCF calculations have been conducted to investigate further the photophysical properties of the complexes, allowing a detailed comparison of the two isomers. We find that Tamm-Dancoff Approximation TD-DFT with the CAM-B3LYP functional provides the best agreement between experimentally and theoretically determined transition energies, performing better than the more common combination of TD-DFT with B3LYP, the reasons for which are outlined. We also highlight some difficulties with performing optimization calculations on oxidized complexes to assess electrochemical data.

Deprotonation Equilibrium of 5-Tropolonediazonium Salt Strongly Favors 1,2,5-Tropoquinone-5-diazide Structure in Certain Solvents

5-Tropolonediazonium salt 1 is a well-known intermediate for the preparation of 5-substituted tropolone derivatives, but 1,2,5-tropoquinone-5-diazide 2, which is expected to be formed by deprotonation of 1, has not been reported. We synthesized 2, and the structures of 1 and 2 were investigated and compared. NMR and UV spectral data indicated that 1 is easily deprotonated in water, methanol, DMSO, and DMF and exists in the form of 2 in these solvents (but not in acetone or acetonitrile) because of its strong acidity (estimated pKa -2.07). Thus, the acid-base equilibrium shows strong solvent-dependence. Compound 2 may be synthetically available as a carbene precursor.