Stomata Density Research Articles

Application of Arbuscular Mycorrhizal Fungi for Improved Growth and Acclimatization of Micropropagated Fegra Fig (Ficus palmata Forssk.) Plantlets

Fegra fig (Ficus palmata) is an important fruit-yielding crop and potential rootstock for grafting Ficus carica. The acclimatization phase is a pivotal step during the micropropagation of plants. During this study, the mycorrhization of micropropagated fegra fig plants with two arbuscular mycorrhizal fungi (AMF; Gigaspora margarita and Gigaspora albida) to enhance their growth and survival during the acclimatization stage was investigated. The AMF were mixed in equal proportions and the acclimatizing fegra fig plantlets were treated for 8 weeks. The leaf pigments, i.e., chlorophyll a [2.56 mg·g−1 fresh weight (FW)], chlorophyll b (1.08 mg·g−1 FW), total chlorophyll (3.67 mg·g−1 FW), and carotenoid (1.34 mg·g−1 FW), of AMF-treated plants were higher than those of non-AMF plants. The number of stomata per unit was higher in the AMF-treated plants (16.00), the density of stomata per unit area (88.40 mm2) of AMF-treated plants was similar to that of non-AMF treated plants, and the number of epidermal cells (79.00) was higher in the AMF-treated plants. The AMF-treated plants were taller and had more leaves, a greater leaf area, and higher shoot FW and dry weight. The AMF-treated plants also had the greatest total root length values, greatest surface areas of roots, and greatest total root volume and diameter compared to those of non-AMF plants. Additionally, the AMF-treated plants had a 100% survival rate, whereas a survival rate of 95% was recorded for non-AMF plants. These findings emphasize the importance of biological acclimatization of micropropagated fegra fig plants with AMF.

Vegetation Growth and Physiological Adaptation of Pioneer Plants on Mobile Sand Dunes

The Hunshandake Sandy Land is one of the largest sandy areas in China and the closest source of sand dust to the Beijing and Tianjing areas. Sand fixation by vegetation is considered the most efficient strategy for sand control and sustainable development, so clarifying the vegetation coverage and plant adaptation characteristics in the Hunshandake Sandy Land is helpful in guiding restoration and improving local sustainability. Here, we investigated the vegetation growth on the mobile sand dunes in the Hunshandake Sandy Land and specified the photosynthesis and stomatal characteristics of the pioneer plants for sand fixation. The vegetation survey showed that the windward slopes of the mobile sand dunes had far lower plant coverage (6.3%) and plant biodiversity (two species m−2) than the leeward ones (41.0% and eight species m−2, respectively). Elymus sibiricus L. and Agriophyllum squarrosum (L.) Moq. were the only two sand-fixing pioneer plants that grew on both the windward and leeward slopes of the mobile sand dunes and had higher plant heights, greater abundance, and more biomass than other plants. Physiological measurements revealed that Elymus sibiricus L. and Agriophyllum squarrosum (L.) Moq. also had higher photosynthetic rates, transpiration rates, and water use efficiency. In addition, the stomata density (151–197 number mm−2), length (18–29 μm), and area index (13–19%) of these two pioneer species were smaller than those of the common grassland species in Inner Mongolia, suggesting that they were better adapted to the dry habitat of the mobile sand dunes. These findings not only help in understanding the adaptive strategies of pioneer plants on mobile sand dunes, but also provide practical guidance for sand dune restoration and the sustainable development of local areas. Pioneer sand-fixing plant species that are well adapted to sand dunes can be used for sowing or aerial seeding in sand fixation during ecosystem restoration.

Effect of seasonal variability on the physiological performance of selected cocoa (Theobroma cacao L) clones in Nigeria

Eleven cocoa clones namely AMAZ 15, ICS 95, IMC 47, MAN 15, PA 150, SCA 9, SPEC 54, UF 67, F3 AMAZON, N 38 and TC 2were hand pollinated and the seeds were raised for 6 months before being transplanted to the field at 6 months. Survival count of the clones was taken for 36 months starting from the first month of establishment. Data on the gas exchange characteristics of cocoa clones started when cocoa were 12 months and continued for the next 2 wet and 2 dry seasons. Majority of cocoa clones showed higher values of stomatal conductance, stomatal transpiration, photosynthetic rates, relative water content, cuticular transpiration and stomata density during wet season while eight of the eleven cocoa clones had higher water use efficiency performance in dry season. The regression analysis also showed a linear, positive and significant relationship between stomatal transpiration and stomatal density of all cocoa clones. The results showed significant differences in the abilities of cocoa clones to cope with water stress while majority of cocoa clones performances significantly differed between dry and wet seasons.

Impact of leaf trichomes and stomatal density on the response of three soybean varieties to sucking pest infestation

Chemical pesticides disrupt local ecosystems, reduce populations of natural predators, and contribute to the evolution of pest resistance. Therefore, developing pest-resistant crop varieties is one of the most promising and environmentally friendly alternatives for pest control today. In the present study field experiments were conducted over two consecutive growing seasons in 2022 and 2023 to explore pest resistance among three soybean varieties viz. Crawford, Giza 111, and Giza 22. The research aimed to assess pest infestation resistance among these varieties, considering various leaf morphological factors. Four key pests were evaluated in the study viz. whiteflies (Bemisia tabaci Genn), spider mites (Tetranychus urticae Koc), aphids (Aphis gossypii Glover), and thrips (Thrips tabaci Lind)). The soybean varieties exhibited differences in susceptibility, and pest density varied across the two growing seasons. Crawford and Giza 111 demonstrated lower resistance, characterized by reduced leaf hair density and an increased number of stomata per leaflet. In contrast, Giza 22 was the most susceptible, featuring a higher density of trichomes and lower stomata density. In terms of field yield, Crawford produced the highest yield, followed by Giza 111, while Giza 22 yielded the least. The results of this study underscore the importance of selecting resistant plant varieties in future pest resistance improvement programs.

Influence of air dust on anatomo-morphological and biochemical parameters of Plantago Major L

Pollution has a great impact on the environment. Plants being the representatives of autotrophic organisms are the first to face it. The photosynthesis suppression, water exchange violation, transpiration reduction, growth general oppression and plants’ development are exposed to pollutants. This causes changes in leaf coloration, necroses, premature leaf fall, changes in growth form. The effect of air dust on anatomo-morphological parameters of plantain and the effect of dust pollution on plantain’s (Plantago major L.) production processes have been studied, the dust-holding capacity of plantain leaves has been estimated. The correlation between the dust pollution level and the stomata density in the leaves’ epidermis of model species has been found out. Mass of aboveground organs (g) and leaf lamina area (cm2), the number of stomata on the leaf surface (pcs./mm2), the dust accumulation level on the leaf surface (g) have been analyzed in model species. Weighing was carried out with an accuracy of 0.001 g on electronic scales. According to the performed analysis, we have come to the conclusions: species of the plantain have 10 to 50 mg of dust particles deposited on the leaf surface, the size of leaf plates and the mass of plantain's terrestrial organs decrease as the level of air pollution increases. It should be underlined that air pollution causes an increase in the density of stomata in plantain associated with a reduction in the area of the assimilating apparatus and it can be viewed as one of the compensatory mechanisms.

Taxonomic relevance of leaf surface micromorphology in Korean Clematis L. (Ranunculaceae).

Clematis, one of the largest genera of the family Ranunculaceae, has a wide array of morphological variation and is considered the most difficult group of taxa in terms of infrageneric discrimination. This study assessed the leaf micromorphological features of 19 Clematis taxa (16 species and three varieties) found in Korea. The leaf surface features were studied under scanning electron microscopy, and the stomatal counting and measurement were carried out under light microscopy. Clematis are hypostomatic, meaning the stomata are only found on the abaxial surface of the leaf. Observed taxa showed near uniformity in the epidermal cell type, structure, and morphology on both surfaces of the leaf. Differences were observed in the presence and absence and/or abundance of trichomes on both the adaxial and abaxial surfaces, the epidermal cell boundary, and the periclinal and anticlinal wall of the cells. Differences were also observed in the number of the epidermal cells connected with the stomata on the abaxial surface, with small differences noted in epidermal cell shapes. The ANOVA showed a significant variation in the stomata density in the studied taxa (P < 0.0001). The cluster analysis based on 13 leaf micromorphological features generated four major clusters. These results indicated similarities in certain key leaf micromorphological features among taxa from the Tubulosae, Clematis, and Virona sections. In the genus Clematis, as with other morphological characteristics, using leaf micromorphological characters alone, which possess limited taxonomic value, proves inadequate for resolving infrageneric relationships. However, incorporating certain features with other morphological characteristics offers a possible alternative means of determining the infrageneric relationships within the genus.

Biocontrol mechanisms of poplar leaf blight due to Nigrospora oryzae.

Nigrospora oryzae, a newly identified pathogen, is responsible for poplar leaf blight, causing significant harm to poplar growth. Here, we describe, for the first time, a biological control method for the control of poplar leaf blight via the applications of 3 dominant Trichoderma strains/species. In this study, dominant Trichoderma species/strains with the potential for biocontrol were identified and then further characterised via dual culture assays, volatile organic compounds (VOCs), and culture filtrates. The biocontrol efficacy of these strains against N. oryzae was found to exceed 60%. Furthermore, the reactive oxygen species (ROS) content in Populus davidiana × P. alba var. pyramidalis (PdPap) leaves pretreated with these Trichoderma strains significantly decreased. Furthermore, pretreatment of PdPap with a combination of these Trichoderma (Tcom) resulted in 9.71-fold and 1.95-fold increases in peroxidase (POD) and superoxide dismutase (SOD) activity, respectively, and 3.87-fold decrease in the MDA content compared to controls. Moreover, Tcom pretreatment activated the salicylic acid (SA) and jasmonic acid (JA) pathway-dependent defence responses of poplar, upregulating pathogenesis-related protein (PR) and MYC proto-oncogene (MYC-R) by more than 12-fold and 17.32-fold, respectively. In addition, Trichoderma treatments significantly increased the number of lateral roots, aboveground biomass, and stomata number and density of PdPap, and Tcom was superior to the single pretreatments. The soil pH also became weakly acidic in these pretreatments, which is beneficial for the growth of PdPap seedlings. These findings indicate that these dominant Trichoderma strains can effectively increase biocontrol and poplar growth promotion.

Mutation of a RING E3 ligase, OsDIRH2, enhances drought tolerance in rice with low stomata density.

Drought is a major environmental stress factor that negatively affects rice growth and yield. From a forward genetic perspective, we selected a drought-insensitive TILLING line (ditl4) from a gamma-ray-induced core mutant population (M10). Under drought conditions, ditl4 exhibited greater fresh weight, survival rate, chlorophyll, proline, and soluble sugar contents, and lower H2O2 and MDA levels than wild-type (WT). In addition, the activities of antioxidant enzymes, such as superoxide dismutase, catalase, and peroxidase, were higher in ditl4 than in the WT. In the relative water loss assay, dilt4 showed significantly decreased leaf curling and water loss compared to WT. Also, the ratio of "closed" stomata aperture was increased in ditl4 under drought stress, suggesting reduced transpiration to prevent water loss. The ditl4 mutant showed decreased stomatal conductance, transpiration, and CO2 assimilation and increased water use efficiency due to the low density of stomata. Whole-genome resequencing analysis of dilt4 identified a single nucleotide polymorphism (SNP) in OsDIRH2 (LOC_Os11g39640), annotated as a RING-H2 type E3 ligase, resulting in a premature stop codon. CRISPR/Cas9-mediated knock-out mutants (OsDIRH2a and OsDIRH2b) enhanced drought tolerance by lowering stomatal density compared to empty vector control plants. These findings suggested that ditl4 with low stomatal density would be useful as a genetic resource for a drought-tolerant breeding program to improve water-use efficiency.

Variation and Phenetic Relationship of Passiflora spp. in Yogyakarta Based on Morphological and Anatomical Characters

Passiflora spp. or passion fruit is a tropical plant that is often used as a food source. The large morphological variations of Passiflora cause difficulties in identifying the species. The objectives of the study are to identify the specific morphological and anatomical characters of Passiflora spp. in Yogyakarta and to determine their phenetic relationship for identification. A total of 15 samples of Passiflora were taken by purposive sampling technique from Bantul, Sleman, Kulon Progo, and Yogyakarta City, and then carried through the morphological and anatomical characterization. The morphological characters observed stems, leaves, and flowers, while the anatomical characters observed leaves. The results show that the observed samples are identified as four species, P. foetida, P. vitifolia, P. edulis, and P. quadrangularis. The P. edulis species consists of two forms, P. edulis f. flavicarpa and P. edulis f. edulis. The variation of morphological character lie in young stem shape, leaf shape, the texture of stem and leaf surface, bract shape and color, sepal and petal color, and the presence of a purple corona ring. While the variation of anatomical characters lie in the pattern of the vascular bundles, the shape of the upper and lower sides of the leaf veins, the shape and size of the palisade cells, as well as the type and density of stomata. Based on the phenetic analysis on the 0.8 phenon line, four main clusters were formed, P. foetida, P. vitifolia, P. edulis, and P. quadrangularis.

Effects of cadmium stress on the growth, physiology, mineral uptake, cadmium accumulation and fruit quality of 'Sharpblue' blueberry

Cadmium (Cd) contamination is becoming a widespread environmental problem, and Cd toxicity risk is increasing in blueberries, typical acidophilous plants. However, studies on the physiological mechanisms of Cd toxicity affecting the growth of blueberry plants and fruits remain limited. Herein, a pot experiment involving four treatments, CK (0 mg·kg−1), Cd1 (2.5 mg·kg−1), Cd2 (15 mg·kg−1) and Cd3 (50 mg·kg−1), was conducted to investigate the effects of Cd stress on the growth, fruit quality, physiological characteristics, mineral composition and Cd uptake of 'Sharpblue' blueberry cuttings, and relationships between physicochemical indices and phenotypic data under Cd stress were analyzed via principal component analysis and Mantel's test. Compared with CK, Cd treatment led to chlorosis (decrease in SPAD and N content) in 'Sharpblue' leaves and inhibited increases in plant height, basal stem, crown width and biomass (dry weight), with the most significant changes in the 50 mg·kg−1 Cd treatment. The size and thickness of the upper epidermal cells, as well as the thickness of the palisade mesophyll and spongy tissues of 'Sharpblue' were significantly reduced at Cd > 15 mg·kg−1, while the density of stomata was significantly increased. Moreover, Cd stress reduced the yield (decrease in size and single-fruit weight) and quality (decrease in anthocyanin, flavonoid and total phenol content and increase in titratable acid content) of 'Sharpblue' fruits, and Cd content in fruit exceeded the Chinese food safety threshold of 0.05 mg·kg−1 when Cd > 15 mg·kg−1. The Cd enrichment capacity of different organs of 'Sharpblue' plants was in the following order: root > shoot > leaf > fruit, and the 50 mg·kg−1 Cd treatment significantly inhibited the uptake of Fe, Mn, Cu, and Zn. Additionally, 'Sharpblue' plants responded to H2O2 and malondialdehyde accumulation in different organs under Cd stress by regulating levels of osmoregulatory substances (soluble protein (SP), soluble sugar, and proline) and altering the activities of catalase, superoxide dismutase, ascorbic acid, and glutathione in the antioxidant system. Finally, correlation analysis revealed that Mg, Fe, Mn, Cu, Cd, H2O2, SP, SPAD, N, anthocyanin, titratable acid, flavonoids, and total phenols were strongly correlated with 'Sharpblue' growth, leaf and fruit phenotype under Cd stress. These findings provide theoretical information for soil safety management and the breeding of Cd-tolerant cultivars during blueberry cultivation, as well as for the study of Cd stress response mechanisms in acidophilous plants.

Allopolyploidy enhances survival advantages for urban environments in the native plant genus Commelina.

Urbanization-induced environmental changes affect the geographical distribution of natural plant species. This study focused on how polyploidization, a dynamic genome change, influences the survival and distribution of Commelina communis L. (Cc) and its subspecies, C. communis f. ciliata (Masam.) Murata (Ccfc) which have different chromosome numbers (e.g. Cc: 2n = 88, Ccfc: 2n = 46). The aim is to investigate polyploidization effects on natural plant distribution in urban environments. The geographical distribution across urban-rural gradients was investigated at a total of 218 sites in Japan. Stomata size and density were measured and compared between Cc and Ccfc. Flow cytometry determined genome size and polyploidy. Chromosome karyotyping was performed using genomic in situ hybridization (GISH) method. Urban areas were exclusively dominated by Cc, while Cc and Ccfc coexisted in rural areas. Cc had larger and fewer stomata and more than twice the genome size than Ccfc. GISH results indicated that Cc possesses Ccfc and another unknown genome, suggesting allopolyploidy. Our results show that the ploidy difference affects the geographical distribution, the stomata traits, and genome size between two distinct taxa in the genus Commelina, C. communis as a neo-tetraploid and C. communis f. ciliata, the diploid. Cc is an allopolyploid, therefore, not only polyploidy but also an additional genome with new sets of genes and alleles contributes to Cc having enhance survival potentials in urban environments compared to Ccfc. This is the first investigation to clarify the distribution difference related to urban environments, the difference in stomata traits and genome size, and to conduct chromosome composition in Commelina species.

Use of biostimulants for water stress mitigation in two durum wheat (Triticum durum Desf.) genotypes with different drought tolerance

Agriculture is facing complex and unprecedented challenges, such as climate change and global population growth, associated with the increase of food demand. Durum wheat (DW) is a strategic crop for food security in the Mediterranean region. In this work, the effect of two biostimulant compounds on drought response of two DW genotypes with different drought tolerance degree was evaluated: the tolerant genotype Svems16 and the sensitive cv. Iride. Genotyping-By-Sequencing analysis allowed to identify variants in response to water-related genes, such as those encoding dehydrins, with Svems16 exhibiting a missense variant divergent from the sequence found in Iride. Drought significantly hindered growth of cv. Iride by increasing oxidative stress and diminishing stomata density. This difficulty was mitigated by the application of biostimulants, which induced root morphological changes, and increased stomata density. On the other hand, the growth of Svems16 seedlings was not significantly affected by drought, confirming its significant degree of tolerance toward that stress compared with Iride. As a result, both biostimulants showed limited efficacy when applied to Svems16 stressed plants. In conclusion, the application of biostimulants emerges as a valuable agronomic strategy for mitigating drought stress in sensitive DW cultivars.

Leaf functional trait evolution and its putative climatic drivers in African Coffea species.

Leaf traits are known to be strong predictors of plant performance and can be expected to (co)vary along environmental gradients. We investigated the variation, integration, environmental relationships, and evolutionary history of leaf functional traits in the genus Coffea L., typically a rainforest understory shrub, across Africa. A better understanding of the adaptive processes involved in leaf trait evolution can inform the use and conservation of coffee genetic resources in a changing climate. We used phylogenetic comparative methods to investigate the evolution of six leaf traits measured from herbarium specimens of 58 African Coffea species. We added environmental data and data on maximum plant height for each species to test trait-environment correlations in various (sub)clades, and we compared continuous trait evolution models to identify variables driving trait diversification. A substantial leaf trait variation was detected across the genus Coffea in Africa, which was mostly interspecific. Of these traits, stomatal size and stomatal density exhibited a clear trade-off. We observed low densities of large stomata in early branching lineages and higher densities of smaller stomata in more recent taxa, which we hypothesise to be related to declining CO2 levels since the mid-Miocene. Brownian Motion evolution was rejected in favour of White Noise or Ornstein-Uhlenbeck models for all traits, implying these traits are adaptively significant rather than driven by pure drift. The evolution of leaf area was likely driven by precipitation, with smaller leaves in dryer climates across the genus. Generally, Coffea leaf traits appear to be evolutionarily labile and governed by stabilising selection, though evolutionary patterns and correlations differ depending on the traits and clades considered. Our study highlights the importance of a phylogenetic perspective when studying trait relationships across related taxa, as well as the consideration of various taxonomic ranges.

Morphological Characteristics and Drought Tolerance of the Diploid and Tetraploid Angelonia angustifolia

Angelonia (Angelonia angustifolia) is an important potted flowering plant or bedding plant widely used in tropical and subtropical regions. However, most Angelonia cultivars have relatively small flowers and demonstrate limited drought tolerance in root-restricted environments such as small containers. Polyploid plants often exhibit larger flowers and enhanced drought tolerance. In this study, Angelonia ‘Serena White’ seeds and ‘Serena Purple’ seedlings were treated with 0.1% and 0.2% colchicine to induce polyploid lines, respectively. The resulting tetraploids had larger pollen and flowers, along with thicker, greener leaves distinguished by serrated edges, longer stomata, and lower stomatal density compared with diploid ‘Serena White’ and ‘Serena Purple’ plants. Both diploid and tetraploid plants subjected to a 20% volumetric water content (VWC) treatment exhibited smaller leaves, higher SPAD-502 readings, and a decreased number of flowers compared with those subjected to 40% VWC treatment. Moreover, tetraploids had higher photosynthetic rates than diploids under both 20% and 40% VWC conditions. When grown in 0.8-L containers, tetraploid plants required fewer watering events and had thicker, erect stems with larger flowers than diploids, even under a 20% VWC treatment. Colchicine-induced polyploidization presents a promising method to potentially enhance drought tolerance in angelonia.

Estimation of Photosynthetic Induction Is Significantly Affected by Light Environments of Local Leaves and Whole Plants in Oryza Genus.

Photosynthetic induction and stomatal kinetics are acknowledged as pivotal factors in regulating both plant growth and water use efficiency under fluctuating light conditions. However, the considerable variability in methodologies and light regimes used to assess the dynamics of photosynthesis (A) and stomatal conductance (gs) during light induction across studies poses challenges for comparison across species. Moreover, the influence of stomatal morphology on both steady-state and non-steady-state gs remains poorly understood. In this study, we show the strong impact of IRGA Chamber Illumination and Whole Plant Illumination on the photosynthetic induction of two rice species. Our findings reveal that these illuminations significantly enhance photosynthetic induction by modulating both stomatal and biochemical processes. Moreover, we observed that a higher density of smaller stomata plays a critical role in enhancing the stomatal opening and photosynthetic induction to fluctuating light conditions, although it exerts minimal influence on steady-state gs and A under constant light conditions. Therefore, future studies aiming to estimate photosynthetic induction and stomatal kinetics should consider the light environments at both the leaf and whole plant levels.

Characterization of cassava (Manihot esculenta Crantz) resistant to drought stress as a result of selection using PEG 6000

Cassava is a source of carbohydrates that grows in tropical areas. The largest cassava producing province in Indonesia is Lampung, and Central Lampung Regency is the main cassava production center in Lampung Province. Plant responses in response to drought vary, such as plants wilting, stomata closing, and chlorophyll content decreasing. The drought stress inducer used in this research was polyethylene glycol. Drought-sensitive cassava will show reduced growth, while tolerant plants will obtain new genotypes that are resistant to drought stress conditions. The aim of this research was to determine the drought tolerant concentration of PEG 6000; distinguish between chlorophyll a, b, and total; and determine the differences in stomata density and stress tolerance index in cassava treated with PEG 6000 and the control. The PEG 6000 treatment consisted of 5 concentration levels, namely 0%, 10%, 20%, 30%, and 40% with each treatment repeated 5 times. The tolerable concentration of PEG 6000 is 40%. The higher the concentration of PEG 6000, the lower the chlorophyll a, b and total content. As the concentration of PEG 6000 increases, the stomata density increases. The stress tolerance index of cassava is categorized into medium tolerant at concentrations of 10% and 20%, and tolerant at concentrations of 30% and 40%.

Morpho-physiological Characteristics under Salinity Stress of Triticum aestivum L. var. Alex

The aim of the study was to highlight morpho-physiological changes like plant height, spike characteristics and stomata features in wheat induced by salt stress. Seeds of wheat var. Alex were sown, in mezo-phyto-cosmos, in five repetitions, under six saline doses, 0, 15, 30, 45, 60, and 75 mM NaCl. The experiment was conducted under field conditions. The assessments including plant height, arista, and spike length were taken and evaluated at the end of the experiment. Adaxial stomatal imprints have been sampled and the stomata density (number of stomata/mm2) and their size were assessed under the microscope. Wheat morphological parameters were affected by the highest salinity dose. Plant height was significantly reduced in the 60 and 75 mM NaCl doses by 16% and 20%. The spike length showed a significant reduction only in the highest saline dose treatment. Arista length registered the highest value in the 15 mM NaCl treatment with 23% more compared to the control. Stomata density reported the highest value in the 15 mM NaCl treatment, significantly higher compared to the 0 mM NaCl dose. The highest salinity doses significantly reduced plant height and spike length. Arista length and stomata density showed similar patterns.

CRISPR/Cas9 edited SlGT30 improved both drought resistance and fruit yield through endoreduplication.

There is often a trade-off effect between different agronomic traits due to gene pleiotropy, leading to a negative correlation between yield and resistance. Consequently, using gene-editing techniques to develop superior traits becomes challenging. Genetic resources that defy this constraint are scarce but hold great potential as targets for improvement through the utilisation of CRISPR. Transcription factors are critical in modulating numerous gene expressions across diverse biological processes. Here, we found that the trihelix transcription factor SlGT30 plays a role in drought resistance and tomato fruit development. We edited the SlGT30 gene with CRISPR/Cas9 technology and found that the knockout lines showed decreased stomata density in the leaves and large fruits. Subsequent examination revealed that cell ploidy was impacted in the leaves and fruits of SlGT30 knockout lines. SlGT30 knockout affected cell size through the endoreduplication pathway, manifested in decreased stomata density and reduced water loss. Consequently, this resulted in an enhancement of drought resistance. For the fruit, both cell size and cell number increased in the fruit pericarp of knockout lines, improving the fruit size and weight accordingly. Therefore, SlGT30 represents a promising candidate gene for gene editing in breeding practice.

Type of stomata and peel structure associated with programmed cell death of senescent spotting in banana

Senescent spotting or brown spot on bananas, is regarded as a form of programmed cell death (PCD). These spots appear in areas where stomata are present on the banana peel, there is no report describing the relationship between these spots and stomata on peel. This research aims to investigate whether senescent spotting in banana is involved in the PCD of stomata on peel. Three banana cultivars, ‘Khai-Kasetsart 2’ (KK2), ‘Dwarf Cavendish’ (CVD), and ‘Hom Thong’ (HT) bananas were examined for senescent spotting. KK2 banana exhibited more severe senescent spotting than CVD banana, while HT bananas did not display brown spot. Electrolyte leakage and DNA degradation increased before the spotting was observed in KK2 and CVD bananas. The peel structure revealed compact cells in CVD and HT bananas, whereas KK2 banana had a loose cell structure. Notably, KK2 banana had a high stomata density correlate with weight loss. Interestingly, the stomata type of KK2 banana was the same as CVD banana, being the typical type, while HT had a sunken type. The spotting zone of KK2 and CVD bananas revealed that stomata were more open than in the healthy zone. Additionally, the outer ground tissue of spotting zone flattened and collapsed, while the healthy zone did not exhibit this flattening and collapsing. Observations of cell morphology in the spotting zone of KK2 banana showed a detached plasma membrane, organelle destruction, and the presence of cell corpse with an absence of cytoplasm clearance. In conclusion, the result provides an evidence that stomata type on the banana peel involve in PCD, resulting in senescent spotting.

RotatedStomataNet: a deep rotated object detection network for directional stomata phenotype analysis.

Innovatively, we consider stomatal detection as rotated object detection and provide an end-to-end, batch, rotated, real-time stomatal density and aperture size intelligent detection and identification system, RotatedeStomataNet. Stomata acts as a pathway for air and water vapor in the course of respiration, transpiration, and other gas metabolism, so the stomata phenotype is important for plant growth and development. Intelligent detection of high-throughput stoma is a key issue. Nevertheless, currently available methods usually suffer from detection errors or cumbersome operations when facing densely and unevenly arranged stomata. The proposed RotatedStomataNet innovatively regards stomata detection as rotated object detection, enabling an end-to-end, real-time, and intelligent phenotype analysis of stomata and apertures. The system is constructed based on the Arabidopsis and maize stomatal data sets acquired destructively, and the maize stomatal data set acquired in a non-destructive way, enabling the one-stop automatic collection of phenotypic, such as the location, density, length, and width of stomata and apertures without step-by-step operations. The accuracy of this system to acquire stomata and apertures has been well demonstrated in monocotyledon and dicotyledon, such as Arabidopsis, soybean, wheat, and maize. The experimental results that the prediction results of the method are consistent with those of manual labeling. The test sets, the system code, and their usage are also given ( https://github.com/AITAhenu/RotatedStomataNet ).