Stille Cross-coupling Reaction Research Articles

Synthesis and Regioselective Functionalization of Tetrafluorobenzo-[α]-Fused BOPYPY Dyes.

The synthesis of a new bis-BF2 tetrafluorobenzo-[α]-fused BOPYPY dye from 4,5,6,7-tetrafluoroisoindole and 2-hydrazinopyrazine is reported. The regioselectivity of nucleophilic substitution reactions at the periphery of the tetrafluorinated BOPYPY and its α-bromo derivative were investigated using N-, O-, S-, and C-based nucleophiles. Among the aromatic fluorine atoms, the F2 atom is consistently regioselectively substituted, except when the α-position contains a thiophenol group; in this case, F4 is substituted instead due to stabilizing π-π-stacking between the two aromatic groups. The α-bromo BOPYPY derivative also reacts under Stille cross-coupling reaction conditions to produce the corresponding α-substituted product. The spectroscopic properties of these new fluorinated BOPYPYs were investigated and compared with nonfluorinated analogs.

Chiral Bay-Alkynylated Tetraazaperylenes: Photophysics and Chiroptical Properties.

Fully bay-alkynylated octaazaperopyrene dioxide (OAPPDO) derivatives were accessible through Stille cross coupling reaction of the corresponding bay-chlorinated derivatives. This steric congestion of the bay area led to helically chiral fluorophores, and chiral resolution of two derivatives allowed the investigation of their chiroptical properties as well as their kinetics of enantiomerization and the related thermodynamic parameters depending on the size of the terminal alkynyl substituent. An increase of the latter resulted in stable OAPPDO atropisomers at room temperature. The dynamics of the photoexcited states of two of the OAPPDO derivatives were investigated by transient absorption (TA) and time-resolved photoluminescence (tr-PL) spectroscopy.

How do we get across? Impact of bridging aromatic units on the optical, electronic, and photovoltaic properties of donor-acceptor polymers

A series of donor - π - acceptor (D- π -A) type polymers (P1, P2, and P3) containing benzodithiophene (BDT) as donor unit and benzothiadiazole (BT) as acceptor unit were designed and synthesized by incorporating diverse electron-rich π bridges as thiophene (T), selenophene (Se) and thieno[3,2-b] thiophene (TT) via Pd-catalyzed Stille cross-coupling reaction. The effect of the various π-bridges on the optical and electrochemical properties of P1, P2, and P3 was examined, and for P1 and P2, the effect of π-bridges on photovoltaic properties was examined. Density functional theory (DFT) calculations were performed on tetramer model structures to understand the effect of π-bridges on the structural, electronic, and optical properties of the resulting polymers. Insertion of different π-bridges results in polymers with up-shifted highest occupied molecular orbital (HOMO). Thiophene π-bridged polymer P1:PC71BM showed the best photovoltaic performance with a power conversion efficiency (PCE) of 3.48 %, a short-circuit density (JSC) of 9.19 mA/cm2, an open-circuit voltage (VOC) of 0.75 V, and a fill factor (FF) of 50.30 %. The highest PCE obtained from a P2:PC71BM-based photovoltaic device was 2.42 %.

Rational design of galactopyranoside-substituted N-heterocyclic carbene palladium(ii) complexes. Stable and efficient catalyst for C-C coupling in aqueous media.

Following a rational design, three novel palladium(ii) complexes bearing galactopyranoside-based N-heterocyclic carbene ligands have been synthesized via transmetalation of the corresponding Ag(i) complexes. Palladium(ii) complexes have been characterized by NMR, FT-IR and elemental analysis. Catalytic studies, using the Stille and Suzuki-Miyaura cross-coupling reactions as model C-C coupling, reveal that the complexes are active and reusable. The best results in terms of TON values were achieved in aqueous medium using either the in situ deacetylation of the catalyst or the previously deacetylated catalyst. The catalytic condition using in situ deacetylation was more efficient because it avoids an additional deprotection step.

Graphene loaded with metal nanoparticles/complexes catalyzed cross-coupling reactions: A review

Various catalytic reactions under suitable conditions were used for the carbon-carbon (C-C) bond formation, such as the Kumada, Mizoroki-Heck, Sonogashira, Negishi, Stille, Suzuki-Miyaura, Hiyama, and Fukuyama cross-coupling reactions. Supporting metal nanoparticles or complexes on functionalized graphene oxide (GO) or reduced graphene oxide (rGO) compounds provides new heterogeneous catalysts with enhanced aptitude for the formation of C-C bonds. This review highlights the applications of metal decorated on modified GO and rGO derivatives to form C-C bonds. We discuss briefly the general mechanistic cycle of each reaction and the recent applications of the graphene-based nanocatalysts for the coupling reactions, along the advantages of each catalyst.

(Mechano)synthesis of azomethine- and terpyridine-linked diketopyrrolopyrrole-based polymers

Three efficient synthetic approaches towards new azomethine- and terpyridine-containing 2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione (diketopyrrolopyrrole, DPP) based polymers, such as P1 and P2, are reported. The first approach involves the Pd-catalyzed synthesis via two- or three-component Suzuki or Stille cross-coupling reaction in solution. The second approach involves Pd-catalyzed Suzuki cross-coupling reaction under ball-milling conditions. And, finally, the third approach involves Pd-free condensation reaction under ball-milling conditions. The newly obtained polymers exhibited absorbance around 700 nm and emission around 900 nm, and, thus, these polymers are considered to be NIR-fluorophores.

Synthesis and characterization of new donor-acceptor oligothiophene derivative with pyrido[1,2,5]thiadiazole as electron accepting unit

A π-conjugated oligothiophene derivative with a D-A-D-A-D (D: donor, A: acceptor) architecture, namely, 2,6-bis[2-(4-n-hexylphenyl)thiophene-[1,2,5]thiadiazolo[3,4-C]pyridine]-4,8-bis((2-ethyl-hexyl)oxy)benzodithiophen (BDT(PTTPH)2), was synthesized by Stille cross-coupling reactions. The chemical structure of oligothiophene derivative was characterized by Fourier infrared spectrophotometer (FTIR) and nuclear magnetic resonance spectrometer (NMR). There are obvious shifts in the Ultraviolet-visible (UV–vis) and pho-toluminescence (PL) spectra of the thin film relative to its solution, indicating the existence of the π-π stacking in the solid state of the oligomer BDT(PTTPH)2. The optical band gap of the oligomer determined from its absorption onset in UV–vis spectra is 1.53 eV. It agrees with the value of 1.52 eV determined from the cyclic voltammetry (CV) measurement. Its highest occupied and lowest unoccupied molecular orbital (HOMO/LUMO) energy levels are -5.31 and -3.79 eV, respectively. According to initial thermogravimetric analysis (TGA) we found that the thermogravimetric temperature of the oligomer BDT(PTTPH)2 is 289 °C. The oligomer is a potential semiconductor material with a good thermal stability and solubility for fabricating organic solar cells.

Impact of the Heteroatoms on Mobility–Stretchability Properties of n-Type Semiconducting Polymers with Conjugation Break Spacers

The development of stretchable semiconducting polymers through statistical terpolymerization with conjugation break spacers (CBSs) has gained much attention. In this study, we systematically investigated the effects of incorporating CBSs with thioether units into naphthalenediimide (NDI)-based n-type semiconducting polymers on their semiconductivity and stretchability compared to polymers with the corresponding alkyl- and ether-based CBSs. Indeed, six NDI-based semiconducting polymers with CBSs composed of di(ethylene sulfide), tetra(ethylene sulfide), di(ethylene oxide), tetra(ethylene oxide), octylene, and tetradecylene units were synthesized by statistical terpolymerization based on Migita–Kosugi–Stille cross-coupling reactions of 5,5′-bis(trimethylstannyl)-2,2′-bithiophene (2T), 4,9-dibromo-2,7-bis(2-decyltetradecyl)benzo[lmn][3,8]phenanthroline-1,3,6,8-tetraone (Br-NDI-Br), and CBSs. The experimental results indicate that heteroatom-based CBSs would sufficiently affect solid-state packing, intrinsic stretchability, and mobility retentions of the corresponding polymers. Although all of the polymers demonstrated strong edge-on orientations, those with ether-based CBSs displayed the lowest crystallinity among them. This result was attributed to the phase separation induced by highly polar ethylene oxide moieties, leading to inferior charge transport performances and low crack onset strain. In contrast, the thin film of the polymer with thioether-based CBSs showed delayed crack onset strain and a high dichroic ratio. The narrower bond angle of C–S–C (98.9°) than C–O–C (113.3°) calculated by the DFT method led to a more bent conformation along the polymer backbone, which provided a strain-releasing capability to realign the polymer chains. Consequently, the polymers with thioether-based CBSs displayed higher mobility–stretchability properties than those comprising ether-based CBSs. This is the first report on the design, synthesis, and application to organic field-effect transistors (OFETs) of stretchable n-type semiconducting polymer materials, clarifying the impact of heteroatoms on the mobility–stretchability properties of n-type semiconducting polymers with new CBSs having ethylene oxide and ethylene sulfide units.

A Mini Review on the Effect of Bases, Catalyst Loading, Temperature and Solvents in the Stille Cross-Coupling Reaction using Pd(II), Cu(I, II) and Ni(II) Complexes as Homogeneous Catalysts

A Mini Review on the Effect of Bases, Catalyst Loading, Temperature and Solvents in the Stille Cross-Coupling Reaction using Pd(II), Cu(I, II) and Ni(II) Complexes as Homogeneous Catalysts

Spectroscopy, molecular structure, and electropolymerization of Ni(II) and Cu(II) complexes containing a thiophene-appending fluorinated Schiff base ligand.

In this contribution, we describe the preparation, characterization, and electrochemical behavior of a series of four new mononuclear M(II) complexes featuring a symmetric substituted N2O2-tetradentate Schiff base ligand, bearing either trifluoromethyl and p-bromophenyl (M = Ni, 3; Cu, 4) or trifluoromethyl and the π-extended p-(2-thienyl)phenylene (M = Ni, 5; Cu, 6) substituents. Complexes 3 and 4 were readily synthesized by reacting the diprotic fluorinated Schiff base proligand 2 with the appropriate hydrated metal(II) acetates, whereas 5 and 6 were obtained upon Stille cross-coupling reaction of 3 and 4 with 2-(tributylstannyl)-thiophene, respectively. Compounds 3-6 were isolated as neutral, air, and thermally stable-coloured solids, with yields ranging from 60 to 80%. The four complexes, the diimine precursor 1 and its trifluoroacetylated derivative 2, were identified using analytical (EA, ESI-MS), spectroscopic (IR, 1H, 13C, and 19F NMR), and X-ray crystallographic methods. X-ray crystal structure determination of complexes 3-5 revealed that both four-coordinate Ni(II) and Cu(II) metal ions adopt a square planar geometry. The magnetic properties of powdered samples of the Cu(II) derivatives 4 and 6 have been investigated (2-300 K) and found consistent in both cases with a single isolated copper(II) ion (s = 1/2). DFT calculations were used to examine the optimal geometries of complexes 5 and 6, allowing for a consistent perspective of their structure and characteristics. The primary aspects of the UV-vis spectra were interpreted using TD-DFT computations. Finally, electrochemical data indicate that complexes 5 and 6 polymerize at high anodic potentials in acetonitrile (greater than 2.0 V vs. Ag/AgCl). Cyclic voltammetry, scanning electron microscopy, and energy-dispersive X-ray spectroscopy (SEM-EDS) analyses were used to characterize the obtained films poly-5 and poly-6.

Understanding the Raman enhancement of carbon nanohorns labelled with organic dyes.

Carbon nanohorns have been non-covalently functionalized with two different benzothiadiazoloquinoxalines prepared via Stille cross-coupling reactions under solvent-free conditions and microwave irradiation. The close interactions between these organic molecules and the nanostructures resulted in a prominent Raman enhancement, which makes them attractive candidates for multiple applications. A complete experimental physico-chemical characterization has been combined with in silico studies to understand these phenomena. The processability of the hybrids was exploited to prepare homogeneous films on substrates with different natures.

A palladium(0)-threonine complex immobilized on the surface of magnetic mesocellular foam: an efficient, stable, and magnetically separable nanocatalyst for Suzuki, Stille, and Heck cross-coupling reactions.

In this study, a new palladium nanocatalyst was supported on l-threonine functionalized magnetic mesocellular silica foams (MMCF@Thr-Pd) and was characterized by FT-IR, XRD, BET, SEM, EDS, VSM, TGA, ICP-OES and elemental mapping techniques. The obtained MMCF@Thr-Pd performance can show excellent catalytic activity for Stille, Suzuki, and Heck coupling reactions, and the corresponding products were obtained with high yields. More importantly, the efficient and stable MMCF@Thr-Pd nanocatalyst was recovered by applying an external magnetic field and reused for at least five consecutive runs without a change in the catalytic activity.

3D printing of a palladium-alumina cermet monolithic catalyst: catalytic evaluation in microwave-assisted cross-coupling reactions

A straightforward manufacture strategy is proposed to obtain an efficient and robust palladium-alumina (Pd0/Al2O3) cermet monolithic catalyst, specifically designed to perform safe microwave assisted organic synthesis (MAOS). In this approach, a cermet catalyst with high surface area, controlled composition and adapted shape and dimensions to a microwave reactor vessel is generated via 3D printing technology and sintering. The resulting catalyst has been explored in heterogeneous Suzuki, Sonogashira, Stille and Heck cross-coupling reactions, in MAOS. The Pd0 catalyst is permanently active, stable, without leaching and can be recycled and reused at least 200 reaction cycles. The generation of hot spots, sparking or hazardous discharges is controlled by the effective immobilization of the palladium in the monolithic structure during the reaction. The palladium content is forming part of both the internal and external structure, providing greater mechanical resistance and catalytic activity with respect to the basic ceramic material (alumina).

Stille vs. Suzuki - cross-coupling for the functionalization of diazocines.

Diazocines are azobenzene derived macrocyclic photoswitches with well resolved photostationary states for the (E)- and (Z)-isomers, which improves their addressability by light. In this work, effective procedures for the stannylation and borylation of diazocines in different positions are reported. Their use in Stille cross-coupling and Suzuki cross-coupling reactions with organic bromides is demonstrated in yields of 47-94% (Stille cross-coupling) and 0-95% (Suzuki cross-coupling), respectively.

Synthesis of Novel Key Chromophoric Intermediates via C-C Coupling Reactions

The fundamentals of Pd-catalyzed Csp2−Csp2 Miyaura borylation, Suzuki cross-coupling, and Stille cross-coupling reactions for a variety of borylated precursors based on phenothiazine (PTZ), phenoxazine (POZ), carbazole (Cz), and quinoxaline (QX) units have been explored. Three palladium-based catalysts were chosen for this study: Pd(PPh3)4, Pd(PPh3)2Cl2, and Pd(dppf)Cl2, applying different reaction conditions. Around 16 desired chromophores were successfully designed and synthesized using C-C cross-coupling reactions in moderate to excellent yields, including PTZ, POZ, and Cz units coupled with QX, indolinium iodide, thienyl, phenyl, or triphenylamine moieties. Additionally, PTZ, POZ, and Cz have been employed in synthesizing various pinacol boronate ester derivatives in good to moderate yields. Interestingly, Pd(dppf)Cl2 was found to be the best catalyst for borylation, and C-C cross-coupling reactions occurred in as little as 30 min, with an excellent yield exceeding 98%. Pd(PPh3)4 and Pd(PPh3)2Cl2 catalyzed the reaction to obtain the desired products in moderate to good yields after a long time (20–24 h). On the other hand, the Suzuki-Miyaura cross-coupling between N-(2-methyl)hexyl carbazole pinacol boronate ester derivative 10c and three halogenated quinoxaline derivatives—4-(3-(5-bromothiophen-2-yl)quinoxalin-2-yl)benzaldehyde (27), 4-(5-(3-(5-bromothiophen-2-yl)quinoxalin-2-yl)thiophen-2-yl)benzaldehyde (30), and 4-(3-chloroquinoxalin-2-yl)benzaldehyde (25) catalyzed by Pd(PPh3)4—afforded three carbazole-quinoxaline chromophores (28, 30, and 31, respectively) in 2–3 h, with good to excellent yields reaching 86%. The electron-deficient QX couplers proved to be coupled efficiently using the Stille coupling reaction, which involves the coupling between electron-rich orgaostannane and electron-deficient halide. The synthesized precursors and desired chromophores were characterized by FTIR, 1H-NMR, 13C-NMR, and HRMS.

Leveraging Metal and Ligand Reactive Sites for One Pot Reactions: Ligand-Centered Borenium Ions for Tandem Catalysis with Palladium.

Tandem catalysts that perform two different organic transformations in a single pot are highly desirable because they enable rapid and efficient assembly of simple organic building blocks into more complex molecules. Many examples of tandem catalysis rely on metal-catalyzed reactions involving one or more metal complexes. Remarkably, despite surging interest in the development of chemically reactive (i. e., non-innocent) ligands, there are few examples of metal complexes that leverage ligand-centered reactivity to perform catalytic reactions in tandem with separate catalytic reactions at the metal. Here we report how multifunctional Pd complexes with triaminoborane-derived diphosphorus ligands, called TBDPhos, appear to facilitate borenium-catalyzed cycloaddition reactions at the ligand, and Pd-catalyzed Stille and Suzuki cross-coupling reactions at the metal. Both transformations can be accessed in one pot to afford rare examples of tandem catalysis using separate metal and ligand catalysis sites in a single complex.

Stereoselective Synthesis of Bisfuranoxide (Aurochrome, Auroxanthin) and Monofuranoxide (Equinenone 5',8'-Epoxide) Carotenoids by Double Horner-Wadsworth-Emmons Reaction.

The stereoselective synthesis of C40-all-trans-carotenoids with the formal hexahydrobenzofuran skeletons aurochrome, auroxanthin, and equinenone-5',8'-epoxide is reported. The synthesis is based on a one-pot or stepwise double Horner-Wadsworth-Emmons (HWE) reaction of a terminal enantiopure C15-5,6-epoxycyclohexadienylphosphonate and a central C10-trienedial. The ring expansion of the epoxycyclohexadienylphosphonate, generated by a Stille cross-coupling reaction, to the hexahydrobenzofuran skeleton was promoted by the reaction conditions of the HWE reaction prior to double-bond formation.

Acceptor-donor-acceptor π-extended systems based on α-dithiophenetetrathiafulvalene (α-DT-TTF): Facile synthesis and photoconductivity studies

π-Extended derivatives of the electron donor (D) α-dithiophenetetrathiafulvalene (α-DT-TTF) were prepared for the first time. The compounds consisting of α-DT-TTF covalently linked to N-alkylated phthalimides (Phth) or thieno[3,4-c]pyrrole-4,6-dione (TPD), as the acceptors (A), in a A-D-A arrangements, were synthesized through microwave-assisted Stille cross-coupling reactions. DFT calculations reveal that the α-DT-TTF unit is coplanar with the TPD plane while a light twist occurs with the Phth end-unit, causing highly planar conjugated cores which are favorable for stacking and intermolecular charge transport. The A-D-A molecular design leads to red-shifted absorption spectra, in comparison with α-DT-TTF, and accessible reduction potentials, as indicated by electrochemical studies. Finally, photoconductivity in the UV–visible, up to 550 nm, was measured in crystals of one of the new compounds with the acceptor phthalimide. This work opens the way for the synthesis of new α-DT-TTF derivatives which can have applications in the optoelectronics field.

Modular Access to Diverse Chemiluminescent Dioxetane-Luminophores through Convergent Synthesis.

Adamantyl‐dioxetane luminophores are an important class of chemiluminescent molecular probes for diagnostics and imaging. We have developed a new efficient synthetic route for preparation of adamantyl‐enolether as precursors for dioxetane chemiluminescent luminophores. The synthesis is convergent, using an unusual Stille cross‐coupling reaction employing a stannane‐enolether, to directly afford adamantyl‐enolether. In a following simple step, the dioxetane is obtained by oxidation of the enolether precursor with singlet‐oxygen. The scope of this synthetic route is broad since a large number of haloaryl substrates are either commercially available or easily accessible. Such a late‐stage derivatization strategy simplifies the rapid exploration of novel luminogenic molecular structures in a library format and simplifies the synthesis of known dioxetane luminophores. We expect that this new synthetic strategy will be particularly useful in the design and synthesis of yet unexplored dioxetane chemiluminescent luminophores.

Hetero-Substituted αβ-Fused BODIPY.

Here, we report the synthesis and properties of heterosubtituted αβ-fused BODIPY fluorophores. The compounds were obtained in good yields by sequential and selective Stille cross-coupling reactions from 2,3,5,6-tetrahalo-BODIPY, allowing the introduction of different substituents at the 3,5 and 2,6 positions of the BODIPY ring. The final fused compounds were synthesized using oxidative cyclisation with ferrous chloride. The fully fused compounds show a strong bathochromically shifted emission along with a hyperchromic shift of the absorption maxima. The fluorescence quantum yields remain relatively large for compounds emitting in this wavelength range. Computational studies have been carried out to fully understand the photophysical behaviour of these dyes.