Stiff Till Research Articles

Cuspate-lobate folding in glacial sediments revealed by a small-scale 3-D seismic survey

We carried out a small-scale 3-D seismic survey (120 × 120 m2, bin size 1.5 m) in advance of a research borehole. The target consists of 150 m of Quaternary sediments in a glacially overdeepened valley. We used a wheelbarrow-mounted electrodynamic vibrator as seismic source and chose a simple orthogonal layout. During one week of acquisition, we fired 1024 shots into 384 vertical geophones.The key processing step was the interpolation and regularization of traces, realized by common reflection surface (CRS) processing. This enhances data quality in low fold regions at small offsets. Despite the small source, the entire Quaternary fill and the base of the valley is imaged well.At a depth of 20–50 m, glaciotectonic deformation, in the form of cuspate-lobate folds, is visible, which was not recognized previously in a 2-D seismic profile that runs along the edge of the 3-D area. The folding indicates that compressional glacial stresses acted on layers of stiff till and less competent clastics. We interpret that the varying fold axes' directions indicate varying stress fields during the Last Glacial Maximum. Cuspate-lobate folding has hitherto not been used to describe the deformation of glacial sediments.

Not all Icequakes are Created Equal: Basal Icequakes Suggest Diverse Bed Deformation Mechanisms at Rutford Ice Stream, West Antarctica

AbstractMicroseismicity, induced by the sliding of a glacier over its bed, can be used to characterize frictional properties of the ice‐bed interface, which are a key parameter controlling ice stream flow. We use naturally occurring seismicity to monitor spatiotemporally varying bed properties at Rutford Ice Stream, West Antarctica. We locate 230,000 micro‐earthquakes with local magnitudes from −2.0 to −0.3 using 90 days of recordings from a 35‐station seismic network located ∼40 km upstream of the grounding line. Events exclusively occur near the ice‐bed interface and indicate predominantly flow‐parallel stick‐slip. They mostly lie within a region of interpreted stiff till and along the likely stiffer part of mega‐scale glacial lineations. Within these regions, micro‐earthquakes occur in spatially (<100 m radius) and temporally (mostly 1–5 days activity) restricted event‐clusters (up to 4,000 events), which exhibit an increase, followed by a decrease, in event magnitude with time. This may indicate event triggering once activity is initiated. Although ocean tides modulate the surface ice flow velocity, we observe little periodic variation in overall event frequency over time and conclude that water content, bed topography and stiffness are the major factors controlling microseismicity. Based on variable rupture mechanisms and spatiotemporal characteristics, we suggest the event‐clusters relate to three end‐member types of bed deformation: (1) continuous creation and seismogenic destruction of small‐scale bed‐roughness, (2) ploughed clasts, and (3) flow‐oblique deformation during landform formation or along bedrock outcrops. This indicates that multiple processes, simultaneously active during glacial sliding, can accommodate stick‐slip behavior and that the bed continuously reorganizes.

A comparison of small strain stiffness in till as measured by seismic refraction and barometric loading response

Soil stiffness can vary over several orders of magnitude depending on the actual range of strain imposed by testing, or as a result of operational strains in geotechnical structures. Soil stiffness changes rapidly with strain level at low strain levels (0.01–0.1%) and the variation with strain is not linear. Characterization of the in situ small strain stiffness of stiff soils is important in geotechnical design; however, analyses of the mechanical behaviour of these soils is confounded by stiffness values that vary with strain level. Stiff till cuttings are susceptible to progressive failure as a result of strain softening. As a consequence, the evolution of stiffness during progressive failure is both a key parameter in characterizing pre-failure slope deformations and a key diagnostic of softening. Changes in strength (due to softening) should be reflected in commensurate temporal and spatial changes in stiffness; consequently, real-time, in situ measurements of stiffness would better define the progression of softening. Seismic surveys, which create small compression and shear strains, have been used to estimate in situ small strain elastic moduli. These spatially extensive measurements can be correlated to temporal variations in stiffness from the monitoring of barometric loading efficiency. In this latter method, the pore pressure response of a grouted (sealed) piezometer to barometric pressure fluctuations is used to measure the compressibility (stiffness) of the formation. This article summarizes the results of field trials within a cutting in stiff till in Northern Ireland in which these two techniques were used to characterize small strain stiffness.

Erosional origin of drumlins and megaridges

The erodent layer hypothesis (ELH) proposes that drumlinization leaves no substantial stratigraphic record because it is primarily an erosional process that cuts an unconformity across pre-existing bed materials. Drumlins most commonly have autochthonous cores of antecedent till(s), other stiff and coarse-grained sediment and rock or any combination thereof, and are also found closely juxtaposed with rock drumlins within the same flow sets (‘mixed beds’). This is at odds with the suggested growth of drumlins by vertical accretion (‘emergence’) from deforming subglacial till (‘soft beds’). ELH argues that drumlins ‘grow down’ by erosional carving of pre-existing stiff till, sediment and/or rock by a thin (<1m) layer of deforming subglacial debris which abrades its substrate. This process is well known to the science of tribology (the study of wearing surfaces) where remnant micro-drumlins, ridges and grooves comparable to drumlins and megaridges are cut by debris (‘erodent layers’) between surfaces in relative motion. In the subglacial setting the erodent layer comprises deforming diamict containing harder ‘erodents’ such as boulders, clast-rich zones or frozen rafts. Similar, till-like erodent layers (cataclasites) cut streamlined surfaces below gravity-driven mass flows such as rock avalanches, landslides and slumps, pyroclastic flows and debris flows; streamlined surfaces including drumlin-like ‘ellipsoidal bumps’ and ridges are also common on the surfaces of faults.Megadrumlins, drumlins and megaridges comprise an erosional continuum in many flow sets. This records the progressive dissection of large streamlined bedforms to form successively more elongate daughter drumlins and megaridges (‘clones’) as the bed is lowered to create a low-slip surface that allows fast ice flow and ice streaming. Clones are the ‘missing links’ in the continuum. ELH predicts preservation within drumlins of antecedent remnant tills and stratigraphies deposited earlier in the glacial cycle under sluggish or steady-state ice flows that were then streamlined by erosion under streaming ice flows. The erodent layer may be preserved as a relatively thin, loosely-consolidated surficial till that drapes the streamlined bedform (the ‘upper till’, ‘cap till’, ‘till veneer’, ‘till mantle’, ‘retreat till’, or ‘englacial debris’ of many previous reports). ELH suggests that there is a fundamental commonality of all forms of erosional wear and streamlining on sliding interfaces from the microscopic scale to the macroscopic scale of ice sheet beds.

Streaming flow of an Antarctic Peninsula palaeo-ice stream by both basal sliding and deformation of substrate

Acoustic sub-bottom profiler surveys on the northeast Antarctic Peninsula shelf indicate that parts of the seabed are underlain by an acoustically transparent layer that is thin on the inner shelf and becomes thicker and more extensive towards the outer shelf. Sedimentological and geophysical data are combined to construct a bed model where streaming ice flow, by both deformation and basal sliding, took place within cross-shelf troughs. The model suggests only limited deformation contributed to fast flow on the inner shelf, i.e. in the onset zone of ice streaming, where the bed was predominantly underlain by a stiff till. Thus, fast ice flow in this area might have been by basal sliding, with deformation confined to discontinuous patches of soft till <40 cm thick. Towards the middle and outer shelf, extensive, thick sequences of soft till suggest a change in the dominant subglacial process towards widespread deformation. This downstream change from basal sliding to subglacial deformation is manifest in the transition from stiff-till dominance to soft-till dominance, while a downstream increase in ice flow velocity is evident from the complex geomorphic imprint on the inner shelf evolving to the more restricted set of bedforms on the outer shelf.

Sedimentological Signature of A Deformable Bed Preserved Beneath An Ice Stream In A Late Pleistocene Glacial Sequence, Ross Sea, Antarctica

Abstract Subglacial processes are described using a nested set of samples from AND-1B drill core collected from beneath the Ross Ice Shelf as part of the ANtarctic geologic DRILLing program (ANDRILL). An interval from the late Pleistocene was chosen for study because it is preserved in the sedimentary record, yet the depositional processes are applicable to the widely studied glacial conditions at the Last Glacial Maximum. A complete glacial–interglacial sequence, between two glacial surfaces of erosion (GSEs) at 41.9 and 47.7 meters below sea floor, was studied by centimeter-scale core logging based on X-radiographs of the archive core halves in addition to core description, bulk samples and 45 mm × 65 mm thin sections of diamictites for micromorphology analysis. Above the lower GSE, 4.6 m of subglacial till occurs including a sequence of thin muddy conglomerate with diverse pebble lithologies, massive clast-rich muddy diamictite, and stratified diamictite with clast-rich and clast-free beds. The sand-size fraction of these deposits is dominated by aggregate grains, termed till pellets following terminology used for Ross Sea deposits. We present the first detailed description and two different conceptual models of tillpellet formation beneath an ice stream: one is related to mechanical processes, and the other is related to thermodynamics. Till pellets are rounded, spherical to prolate in form, and are associated with turbate structures and aligned grains in thin sections. The core of the pellet is either a lithic grain or stiff till with additional clay plastered on the outside, forming rounded grains from originally angular ones. Galaxy structures, skelsepic fabric, and pressure shadows around grains are indicative of rotational deformation within the till. Till pellets form in situ within a highly porous deformable bed under an ice stream either by mechanical shearing or by alternating thermal conditions in the till. In the first model, a slow glacial advance under dry subglacial conditions fractures the till, increasing the porosity as shear induces dilation. Basal melting and high pore-water pressure develop as the ice stream thickens, decreasing the intergranular effective stress and inducing rotation of the angular till aggregates. An alternative model calls for basal freezing with preferential ice growth in larger pore spaces causing rotation of fine-grained till aggregates due to concentration of shear stresses in a thin zone beneath the glacier sole. Survival of till pellets is enhanced in subglacial diamictite as the thin zone of deformation moves upward toward the base of the ice stream. A thin granular bed enriched in till pellets is melted out in the grounding zone, and this deposit marks the transition from subglacial till to stratified silty claystone representing sub–ice shelf deposits.

Till genesis at the bed of an Antarctic Peninsula palaeo-ice stream as indicated by micromorphological analysis

Sediment cores from cross-shelf troughs on the NE Antarctic Peninsula shelf recovered tills with variable shear strengths that represent different subglacial depositional regimes. In addition to detailed qualitative micromorphological descriptions, a quantitative method was applied, which revealed a higher abundance of boudins and intraclasts and a lower abundance of crushed and fractured grains in samples from the soft till compared with samples from the underlying stiff till. This is the first evidence of significant (micro-scale) differences between the two types of till and thus strengthens previous interpretations that were based primarily on shear strength. The differences between the soft and stiff till relate to a deforming continuum whereby the initial deposition of till as ice advanced across the shelf produced ductile structures before dewatering and compaction led to the formation of brittle structures such as crushed and fractured grains in the now stiff till. A change in ice-flow dynamics led to streaming flow and the deformation of the upper parts of the stiff till that was being reworked into a soft till. The soft till facilitated ice streaming, and progressive shearing led to the homogenization of the ice stream substrate, which was partially advected downstream. The resulting till thus contains poly-deformational structures, with deformation structures inherited from the stiff till being generally poorly preserved. Our micromorphological analysis of the soft till provides the first widespread sedimentological evidence of deformation across the palaeo-ice stream bed on the NE Antarctic Peninsula shelf.

Streaming flow of an Antarctic Peninsula palaeo-ice stream, both by basal sliding and deformation of substrate

AbstractAcoustic sub-bottom profiler surveys on the northeast Antarctic Peninsula shelf indicate that parts of the seabed are underlain by an acoustically transparent layer that is thin on the inner shelf and becomes thicker and more extensive towards the outer shelf. Sedimentological and geophysical data are combined to construct a bed model where streaming ice flow, by both deformation and basal sliding, took place within cross-shelf troughs. The model suggests only limited deformation contributed to fast flow on the inner shelf, i.e. in the onset zone of ice streaming, where the bed was predominantly underlain by a stiff till. Thus, fast ice flow in this area might have been by basal sliding, with deformation confined to discontinuous patches of soft till &lt;40 cm thick. Towards the middle and outer shelf, extensive, thick sequences of soft till suggest a change in the dominant subglacial process towards widespread deformation. This downstream change from basal sliding to subglacial deformation is manifest in the transition from stiff-till dominance to soft-till dominance, while a downstream increase in ice flow velocity is evident from the complex geomorphic imprint on the inner shelf evolving to the more restricted set of bedforms on the outer shelf.

Contrasting sources for glacial and interglacial shelf sediments used to interpret changing ice flow directions in the Larsen Basin, Northern Antarctic Peninsula

Marine sediment cores from the former Larsen A Ice Shelf area reveal three lithological units deposited during ice sheet advance and retreat from the continental shelf. The uppermost Unit 1 consists of a diatom-bearing silty clay with sparse ice-rafted debris (IRD). Clasts include rock types which can all be matched to onshore outcrops along the eastern side of the Antarctic Peninsula. Most clasts are very angular, angular or subangular. The clasts in this unit are interpreted as supraglacial or englacial debris deposited below an ice shelf distal from the grounding line and/or by icebergs in an open marine setting during the Holocene. In the underlying Units 2 and 3 clast lithologies are quite different and mainly comprise Cretaceous and Jurassic sedimentary rocks. These lithologies were derived locally from the continental shelf (the Larsen Basin) rather than the limited onshore outcrops. Of the 2750 clasts studied in Units 2 and 3, most are subrounded or subangular, and some are striated. Unit 2 is interpreted as being deposited beneath an ice shelf proximal to the grounding line. Unit 3 is interpreted as subglacial diamict deposited by grounded ice flowing across the shelf during the last glacial period. The availability of sedimentary rocks at the seabed may have facilitated the development of a deforming till layer with low shear strength (i.e. soft or deformation till) within Unit 3. There are no consistent differences in clast composition or roundness between the deformation till, which was probably deposited at the base of an ice stream, and an underlying till with high shear strength (i.e. stiff till). On the inner shelf where the bedrock lies very close to the seabed, clast composition in the subglacial diamicts affords a way of identifying the presence of Mesozoic stratigraphic units. The contrasting provenance of the coarse fraction between Unit 1 and Units 2 and 3 is used to interpret ice sheet basal thermal regime and produce a conceptual model of changing palaeo-flow directions between glacial and interglacial periods. Grain roundness and petrology are shown to be a potent method for interpreting different glacial/interglacial processes and environments.

Till characteristics, genesis and transport beneath Antarctic paleo‐ice streams

Marine geophysical data from the Antarctic continental shelf indicate the former presence of ice streams that drained through bathymetric troughs during the last glacial cycle. Streaming flow is recorded by elongate subglacial bedforms, formed in the upper part of an acoustically transparent sediment layer. Cores from the layer demonstrate that it is a weak and porous subglacial till (“soft till”). Shear within the soft till was concentrated in zones that were 0.1–0.9 m thick. The soft till is a “hybrid” till, formed by a combination of subglacial sediment deformation and lodgment. The base of the soft till is marked by a strong reflector which represents the top of a denser and stronger “stiff till.” The form of this reflector ranges from flat and continuous to deeply grooved and irregular, implying the operation of different mechanisms of sediment mobilization and incorporation into the soft till layer. The irregular form of the basal reflector is consistent with grooving, whereas the flat and continuous form is more consistent with sediment mobilization as a subglacial traction carpet related to changes in basal effective stress. Geophysical evidence for large‐scale advection of the soft till, combined with evidence for deformation partitioning into relatively thin layers up to 0.9 m thick, indicates that localized shear zones integrated to transport significant volumes of sediment beneath Antarctic paleo‐ice streams.

Late Quaternary glacial history, flow dynamics and sedimentation along the eastern margin of the Antarctic Peninsula Ice Sheet

Geological and geophysical data from the NE Antarctic Peninsula continental shelf are used to reconstruct the glacial history, flow-dynamics and sedimentation of the Antarctic Peninsula Ice Sheet (APIS) along its eastern margin during the Late Quaternary. Ice advanced to the shelf edge during the Last Glacial Maximum (LGM) and deposited a stiff till across the shelf. The presence of highly attenuated bedforms indicates that fast-flowing outlets drained the APIS through cross-shelf troughs to the outer shelf after this ice advance. The bedforms are formed in deformation till in response to deforming bed processes. Deglaciation of Robertson Trough and the troughs of Prince Gustav Channel, Larsen-A and Larsen Inlet was continuous (and possibly rapid) on account of the absence of ice-margin recessional features. In contrast, grounding-zone wedges across the shelf of Northern Larsen-A and south of Prince Gustav Channel indicate that ice retreat was gradual and was punctuated by stillstands. The transition from a grounded ice sheet to ice shelf conditions was completed before 11–12 14C ka BP on the shelf south of Prince GustavChannel, and is marked across the shelf by a change from subglacial till to a transitional heterogeneous unit dominated by coarse-grained facies. Transitional sediments record mainly sub-ice shelf rain-out and restricted bottom current and sediment-laden plume activity, as well as localised debris flows. Meltwater-derived facies are largely absent indicating that release of meltwater was not significant beneath polar ice shelves, or during deglaciation of the APIS. In the broader context, the colder, eastern side of the APIS was extensive and was drained mainly through fast-flowing outlets (palaeo-ice streams). Therefore, the eastern APIS would have been an important contributor to sediment and iceberg flux to the Weddell Sea Embayment during the LGM and subsequent deglaciation.