Reaction Steps Research Articles

An Active and Regenerable Nanometric High-Entropy Catalyst for Efficient Propane Dehydrogenation.

Propane dehydrogenation (PDH) is crucial for propylene production, but commercially employed Pt-based catalysts face susceptibility to deactivation due to the Pt sintering during reaction and regeneration steps. Here, we report a SiO2 supported nanometric (MnCoCuZnPt) high-entropy PDH catalyst with high activity and stability. The catalyst exhibited a super high propane conversion of 56.6% with 94% selectivity of propylene at 600 °C. The propylene productivity reached 68.5 molC3H6·gPt-1·h-1, nearly three times that of Pt/SiO2 (23.5 molC3H6·gPt-1·h-1) under a weight hourly space velocity of 60 h-1. In a high-entropy nanoparticle, Pt atoms were atomically dispersed through coordination with other metals and exhibited a positive charge, thereby showcasing remarkable catalytic activity. The high-entropy effect contributes to the catalyst a superior stability with a low deactivation constant of 0.0004 h-1 during 200 hours of reaction under the industrial gas composition at 550 °C. Such high-entropy PDH catalyst is easy regenerated through simple air combustion of deposited coke. After the fourth consecutive regeneration cycle, satisfactory catalytic stability was observed, and the element distribution of spent catalysts almost returned to their initial state, with no detectable Pt sintering. This work provides new insights into designing active, stable, and regenerable novel PDH catalysts.

Ru-Mediated and Sulfur-Directed ortho-C–H Activation of Benzyl Thioethers with Internal Alkynes and Selective Hydrothiolation of Acetylene Dicarboxylates

AbstractIn this report, we have established a Ru(η6-C6H6)Cl2 catalysed ortho-C–H activation of benzyl thioethers with alkynes under milder reaction conditions. The sulfur atom of benzyl thioethers worked as a directing group for ortho-C–H activation of benzyl thioethers. The reaction was found to tolerate a range of benzyl thioethers as well as alkynes. Moreover, the reaction is significantly influenced by the length of alkyl and aryl thioethers, with the best results being obtained with benzyl thioethers. Kinetic isotopic experiments suggest that the ortho-C–H bond-breaking is not a rate-determining step for the present reaction. In an unusual observation that has not been reported, apart from ortho-C–H activation, under the same reaction conditions, a selective debenzylative hydrothiolation was exclusively obtained with acrylates, which broadens the synthetic impact of benzyl thioethers for the preparation of mixed chalcogen ethers.

A First-Principles Study on the Reaction Mechanisms of Electrochemical CO2 Reduction to C1 and C2 Products on Cu(110)

The mechanism of the electrochemical CO2 reduction reaction on a Cu(110) surface has yet to be fully revealed. In this work, based on first-principles calculations, we investigate the mechanisms of the CO2 reduction reaction to produce C1 (including one C atom) and C2 (including two C atoms) products on a Cu(110) surface. The results show that CH4 and C2H5OH are the main C1 and C2 products on the Cu(110) surface, respectively. CH4 is produced along the pathway CO2 → COOH* → CO* → CHO* → CH2O* → CH3O* → CH4. C2H5OH is produced via the C-C coupling pathway between CO* and CH2O* intermediates, which is the key reaction step. This is because CO* and CH2O* coupling to CO-CH2O* has the lowest barrier among the CHxO* (x = 0–2) coupling pathways. Therefore, it is the most likely C-C coupling pathway. Further, CO-CH2O* is gradually hydrogenated to C2H5OH along the following pathway: CO-CH2O* → CHO-CH2O* → CHOH-CH2* → CH2OH-CH2* → CH2OH-CH3* → C2H5OH.

(Ni or/and Co) Supported over Praseodymia as Oxygen Carriers for Chemical Looping Syngas Production

AbstractThe present research describes one of the processes outlined in the literature, known as Chemical Looping Dry Reforming of Methane, which is currently to gain attraction to produce clean fuels from natural gas using a metal oxide support as a catalyst. This two‐step method offers distinct advantages by physically separating the reaction steps. This spatial separation effectively eliminates undesirable side reactions, leading to highly efficient syngas production with minimal carbon deposition. Crucial to optimizing this process is a deep understanding of the oxygen storage capacity (OSC) of the support (oxygen carrier) that will work in synergy with the supported active phase. Among the candidates, praseodymium stands out due to its favourable redox properties and exceptional OSC characteristics, making it a promising option for cleaner fuel technologies. In particular, this study emphasizes the significant influence of the nature of the active phases (Ni, Co or their bimetallic combinations), with bimetallic phases being the most promising (even without reduction, they can exhibit activity that equals or improves that of the Ru as benchmark), underscoring the fundamental role of catalyst design in achieving optimal performance. The results indicate that these compositions have high activities to generate the products, remaining close to the activity of ruthenium and generating minimal coke deposits in one reaction cycle.

On the Selection of Catalysts’ Support with High Oxygen Delivery Capacity for DRM Application: Interest of Praseodymium as Dopant of Ceria

AbstractIn the present work, a series of supports with varying compositions (ranging from pure CeO2 to pure PrO2-y) was designed to investigate their ability to release oxygen (with the concomitant formation of oxygen vacancies) under diverse reducing atmospheres: hydrogen (H2), helium (He), and in the presence of a carbonaceous substance that mimics eventual carbon deposits formed under practical reaction conditions (DRM). Oxygen vacancies were generated effectively in all three atmospheres (following the order He < H2 < carbon material). With regard to the influence of the composition, the capability to generate oxygen vacancies clearly increased with the Pr content, for whatever the conditions tested. Notably, the non-stoichiometry obtained with the support of pure praseodymia in both inert and reducing atmospheres is very remarkable, as it approaches the maximum non-stoichiometry value of the well-established theoretical Bevan cluster. This leads to consider this formulation as a very promising support for applications in catalysis and other fields where oxygen vacancies play a crucial role. Dry Reforming of Methane requires catalytic supports that possess highly mobile oxygen, enabling it to actively participate in the reactions step involved or potentially gasify undesirable carbon deposits generated during parallel reactions. Consequently, designing and elucidating the behavior of ceria-praseodymium-based supports with high reducibility and generation of oxygen vacancies (oxygen storage and release capacity) holds particular relevance in this context. Actually, the very preliminary results comparing two counterpart formulations (5%Ni/PrO2-y versus 5%Ni/Al2O3) already confirm the suitability of the choice of pure praseodymia in terms of activity, stability and very high selectivity towards H2 and CO, reaching a very close value to the ideal H2/CO ratio of 1.

Performance and Mechanism of Co and Mn Loaded on Fe- Metal-Organic Framework Catalysts with Different Morphologies for Simultaneous Degradation of Acetone and NO by Photothermal Coupling

VOCs can be used instead of ammonia as a reducing agent to remove NO, achieving the effect of removing VOCs and NO simultaneously. Due to the high energy consumption and low photocatalytic efficiency required for conventional thermocatalytic purification, photothermal coupled catalytic purification can integrate the advantages of photocatalysis and thermocatalysis in order to achieve the effect of pollutants being treated efficiently with a low energy consumption. In this study, samples loaded with Co and Mn catalysts were prepared using the hydrothermal method on Fe-MOF with various morphologies. The catalytic performance of each catalyst was analyzed by studying the effects of their physicochemical properties through various characterizations, including XRD, SEM, BET, XPS, H2-TPR, TEM and O2-TPD. The characterization results demonstrated that the specific surface area, pore volume, high valence Co and Mn atoms, surface adsorbed oxygen and the abundance of oxygen lattice defects in the catalysts were the most critical factors affecting the performance of the catalysts. Based on the results of the performance tests, the catalysts prepared with an octahedral-shaped Fe-MOF loaded with Co and Mn showed a better performance than those loaded with Co and Mn on a rod-shaped Fe-MOF. The conversions of acetone and NO reached 50% and 64%, respectively, at 240 °C. The results showed that the catalysts were capable of removing acetone and NO at the same time. Compared with the pure Fe-MOF without Co and Mn, the loaded catalysts showed a significantly higher ability to remove acetone and NO simultaneously under the combination of various factors. The key reaction steps for the catalytic conversion of acetone and NO on the catalyst surface were investigated according to the Mars–van Krevelen (MvK) mechanism, and a possible mechanism was proposed. This study presents a new idea for the simultaneous removal of acetone and NOx by photothermal coupling.

Bimetal (CuNi and CuCo) substituted CeO2: An approach for low temperature dry reforming of methane

The solution combustion synthesis method was used to make CuNi substituted CeO2 (7.5 at.% of Cu+7.5 at.% of Ni), and CuCo substituted CeO2 (7.5 at.% of Cu+7.5 at.% of Co) catalysts. The catalysts were characterized by x-ray diffraction (XRD),XPS, BET surface area measurements, scanning electron microscopy (SEM), and H2-temperature-programmed reduction(H2-TPR). Further, these catalysts were tested for endothermic dry reforming of methane (DRM) reaction. The CuNi substituted CeO2 catalyst started dry reforming of methane (DRM) at around 350 °C, while the CuCo substituted CeO2 catalyst started DRM at around 450 °C. This indicates that the CuNi catalyst has a lower activation temperature for the DRM reaction compared to the CuCo catalyst. The CuNi substituted CeO2 catalyst converted CH4 better than the CuCo substituted CeO2 at all temperatures reaching 98 % conversion at 800 °C The CuNi substituted CeO2 showed higher H2/CO ratio in comparison to the CuCo substituted CeO2 but the long-term stability followed the opposite order. Thermal gravimetric analysis (TGA), SEM and O2-TPO were used to quantify as well as to understand the nature of carbon that had built up on spent catalysts and it is mostly amorphous. Transient studies have shown that along with the lattice oxygen participation, controlled methane decomposition step is necessary for stability of catalysts. Transient studies also recommended additional reaction steps during DRM where an exothermic methane partial oxidation step reduces the endothermicity of DRM. Also, CO2 activation also goes via the defect dissociation route, an additional step to the conventional carbon oxidation (CO2+C→CO) step. So, novelty of this work is in elucidating the exact role of lattice oxygen in imparting the activity and stability to the DRM catalyst.

Catalysis of an SN2 pathway by geometric preorganization.

Bimolecular nucleophilic substitution (SN2) mechanisms occupy a central place in the historical development and teaching of the field of organic chemistry1. Despite the importance of SN2 pathways in synthesis, catalytic control of ionic SN2 pathways is rare and notably uncommon even in biocatalysis2,3, reflecting the fact that any electrostatic interaction between a catalyst and the reacting ion pair necessarily stabilizes its charge and, by extension, reduces polar reactivity. Nucleophilic halogenase enzymes navigate this tradeoff by desolvating and positioning the halide nucleophile precisely on the SN2 trajectory, using geometric preorganization to compensate for the attenuation of nucleophilicity4. Here we show that a small-molecule (646 Da) hydrogen-bond-donor (HBD) catalyst accelerates the SN2 step of an enantioselective Michaelis-Arbuzov reaction by recapitulating the geometric preorganization principle employed by enzymes. Mechanistic and computational investigations reveal that the HBD diminishes the reactivity of the chloride nucleophile yet accelerates the rate-determining dealkylation step by reorganizing both the phosphonium cation and the chloride anion into a geometry that is primed to enter the SN2 transition state. This new enantioselective Arbuzov reaction affords highly enantioselective access to an array of H-phosphinates, which are in turn versatile P-stereogenic building blocks amenable to myriad derivatizations. This work constitutes, to our knowledge, the first demonstration of catalytic enantiocontrol of the phosphonium dealkylation step, establishing a new platform for the synthesis of P-stereogenic compounds.

Mechanistic Insights into the Direct Deoxygenation of Phenolic Compounds over Novel Heusler Alloy Catalysts.

The catalytic deoxygenation of phenolic compounds is a crucial step in the valorization of biomass resources, which can effectively enhance the heating value and stability of primary biofuel. In this study, the catalytic mechanism of four Heusler alloy catalysts for the direct deoxidation pathway of phenol was studied through electronic structure regulation by element occupation. We found that Heusler alloys catalysts exhibit excellent catalytic activity in the dissociation activation of H2 and the cleavage of aryl hydroxyl bond (CAr-OH) bonds. The energy barriers for the direct cleavage of the CAr-OH bond in phenol on Ni2MoAl, Co2MoAl, Ni2NbAl and Ni2MoGa catalysts are 0.86, 0.95, 1.09, and 1.28 eV, respectively. And Y element of the X2YZ catalyst has a significant impact on this reaction, while the X element has a complex influence on the hydrogenation step of the unsaturated benzene ring. Microkinetic analysis further substantiates that the phenol (CAr-OH) bond cleavage step in the reaction exhibits a fast reaction rate and high extent of reaction. The reaction of hydroxyl hydrogenation to produce water exhibits the highest energy barrier, serving as the rate-determining step of the entire reaction. This issue could potentially be addressed by further fine-tuning the electronic structure.

Dihydroorotase MoPyr4 is required for development, pathogenicity, and autophagy in rice blast fungus

Dihydroorotase (DHOase) is the third enzyme in the six enzymatic reaction steps of the endogenous pyrimidine nucleotide de novo biosynthesis pathway, which is a metabolic pathway conserved in both bacteria and eukaryotes. However, research on the biological function of DHOase in plant pathogenic fungi is very limited. In this study, we identified and named MoPyr4, a homologous protein of Saccharomyces cerevisiae DHOase Ura4, in the rice blast fungus Magnaporthe oryzae and investigated its ability to regulate fungal growth, pathogenicity, and autophagy. Deletion of MoPYR4 led to defects in growth, conidiation, appressorium formation, the transfer and degradation of glycogen and lipid droplets, appressorium turgor accumulation, and invasive hypha expansion in M. oryzae, which eventually resulted in weakened fungal pathogenicity. Long-term replenishment of exogenous uridine-5’-phosphate (UMP) can effectively restore the phenotype and virulence of the ΔMopyr4 mutant. Further study revealed that MoPyr4 also participated in the regulation of the Pmk1-MAPK signaling pathway, co-localized with peroxisomes for the oxidative stress response, and was involved in the regulation of the Osm1-MAPK signaling pathway in response to hyperosmotic stress. In addition, MoPyr4 interacted with MoAtg5, the core protein involved in autophagy, and positively regulated autophagic degradation. Taken together, our results suggested that MoPyr4 for UMP biosynthesis was crucial for the development and pathogenicity of M. oryzae. We also revealed that MoPyr4 played an essential role in the external stress response and pathogenic mechanism through participation in the Pmk1-MAPK signaling pathway, peroxisome-related oxidative stress response mechanism, the Osm1-MAPK signaling pathway and the autophagy pathway.

Potential of V-Si72, V-C72, and V-Al36N36 as catalysts for oxygen reduction reaction.

The capacities of V-Si72, V-C72, and V-Al36N36 nanocages to catalyze the ORR processes have been investigated. The acceptable pathways of ORR processes on V-Si72, V-C72, and V-Al36N36 nanocages have been examined by DSD-PBEPBE-D3/aug-cc-pVDZ, PW91PW91/aug-cc-pVDZ, and COSMO model in the gas phase and water. The ΔGreaction values of reaction steps of ORR pathways on V-Si72, V-C72, and V-Al36N36 nanocages are calculated. The Eadoption and Eformation of V-Si72, V-C72, and V-Al36N36 nanocages are negative values and these nanostructures are stable materials. The H2O has the lowest Eadsorption on V-Si72, V-C72, and V-Al36N36 nanocages. The *OH formation, creation of *OH-OH*, and formation of O* are rate-determining steps of ORR mechanisms. The overpotential values of ORR processes on V-Si72, V-C72, and V-Al36N36 nanocages are 0.41, 0.37, and 0.30V, respectively. The V-Al36N36 nanocage have lower overpotential for ORR processes than V-Si72 and V-C72 nanocages by DSD-PBEPBE-D3/aug-cc-pVDZ, PW91PW91/aug-cc-pVDZ, and COSMO model in the gas phase and water. The V-Al36N36 nanocage have more negative ∆Greaction for reaction steps of ORR than V-Si72 and V-C72 nanocages. The V-Al36N36 nanocage with lower overpotential is proposed as an effective catalyst for ORR processes via studied pathways. The DSD-PBEPBE-D3/aug-cc-pVDZ method has been used to optimize and calculate the frequencies of V-Si72, V-C72, and V-Al36N36 nanocages in GAMESS software. The complexes of O, OH, OOH, and H2O with V-Si72, V-C72, and V-Al36N36 nanocages are optimized and frequencies are determined by the DSD-PBEPBE-D3/aug-cc-pVDZ method. The Gactivation and ∆Greaction of ORR pathways on V-Si72, V-C72, and V-Al36N36 nanocages are calculated by DSD-PBEPBE-D3/aug-cc-pVDZ, PW91PW91/aug-cc-pVDZ, and COSMO model in the gas phase and water.

Mechanistic insights into the conversion of flavin adenine dinucleotide (FAD) to 8-formyl FAD in formate oxidase: a combined experimental and in-silico study

Formate oxidase (FOx), which contains 8-formyl flavin adenine dinucleotide (FAD), exhibits a distinct advantage in utilizing ambient oxygen molecules for the oxidation of formic acid compared to other glucose-methanol-choline (GMC) oxidoreductase enzymes that contain only the standard FAD cofactor. The FOx-mediated conversion of FAD to 8-formyl FAD results in an approximate 10-fold increase in formate oxidase activity. However, the mechanistic details underlying the autocatalytic formation of 8-formyl FAD are still not well understood, which impedes further utilization of FOx. In this study, we employ molecular dynamics simulation, QM/MM umbrella sampling simulation, enzyme activity assay, site-directed mutagenesis, and spectroscopic analysis to elucidate the oxidation mechanism of FAD to 8-formyl FAD. Our results reveal that a catalytic water molecule, rather than any catalytic amino acids, serves as a general base to deprotonate the C8 methyl group on FAD, thus facilitating the formation of a quinone-methide tautomer intermediate. An oxygen molecule subsequently oxidizes this intermediate, resulting in a C8 methyl hydroperoxide anion that is protonated and dissociated to form OHC-RP and OH−. During the oxidation of FAD to 8-formyl FAD, the energy barrier for the rate-limiting step is calculated to be 22.8 kcal/mol, which corresponds to the required 14-hour transformation time observed experimentally. Further, the elucidated oxidation mechanism reveals that the autocatalytic formation of 8-formyl FAD depends on the proximal arginine and serine residues, R87 and S94, respectively. Enzymatic activity assay validates that the mutation of R87 to lysine reduces the kcat value to 75% of the wild-type, while the mutation to histidine results in a complete loss of activity. Similarly, the mutant S94I also leads to the deactivation of enzyme. This dependency arises because the nucleophilic OH− group and the quinone-methide tautomer intermediate are stabilized through the noncovalent interaction provided by R87 and S94. These findings not only explain the mechanistic details of each reaction step but also clarify the functional role of R87 and S94 during the oxidative maturation of 8-formyl FAD, thereby providing crucial theoretical support for the development of novel flavoenzymes with enhanced redox properties.

Rapid, easy, sensitive, low‐cost and on‐site detection of environmental DNA and RNA using CRISPR‐Cas13

Abstract Environmental DNA (eDNA) monitoring of species distribution has become a critical tool in ecology, conservation biology and fisheries for identifying the presence and distribution of diverse organisms, including important, threatened and invasive species. However, eDNA detection still has room for improvement in sensitivity, requiring time‐consuming real‐time polymerase chain reaction (qPCR) steps and costly machines. In this study, we report a CRISPR‐Cas13‐based method for rapid, easy, sensitive, low‐cost and on‐site detection of eDNA. The assay for the detection of common carp (Cyprinus carpio) and medaka (Oryzias latipes) nucleic acid employs a two‐step process, starting with recombinase polymerase amplification (RPA) and followed by cleavage using Cas13 nuclease, to effectively identify mitochondrial DNA or RNA. Our results showed that the Cas13‐based method has a higher sensitivity than the qPCR‐based method in detecting tiny amounts of eDNA. When combined with reverse transcription of environmental RNA (eRNA), our method increased detection sensitivity by approximately one order of magnitude. Cas13‐based detection could achieve on‐site detection of eDNA using a quick nucleic acid extraction solution and lateral flow strips. Cas13‐based detection of eDNA and eRNA requires minimal training efforts and can be performed in 1 h, without the need for centrifugation and qPCR machines. The portability of the Cas13‐based method, along with its accuracy and relative ease in designing primers and CRISPR RNA (crRNA), underscores its potential to broaden the application of eDNA and eRNA in various fields, including biodiversity conservation.

Rapid, easy, sensitive, low‐cost and on‐site detection of environmental DNA and RNA using CRISPR‐Cas13

Abstract Environmental DNA (eDNA) monitoring of species distribution has become a critical tool in ecology, conservation biology and fisheries for identifying the presence and distribution of diverse organisms, including important, threatened and invasive species. However, eDNA detection still has room for improvement in sensitivity, requiring time‐consuming real‐time polymerase chain reaction (qPCR) steps and costly machines. In this study, we report a CRISPR‐Cas13‐based method for rapid, easy, sensitive, low‐cost and on‐site detection of eDNA. The assay for the detection of common carp (Cyprinus carpio) and medaka (Oryzias latipes) nucleic acid employs a two‐step process, starting with recombinase polymerase amplification (RPA) and followed by cleavage using Cas13 nuclease, to effectively identify mitochondrial DNA or RNA. Our results showed that the Cas13‐based method has a higher sensitivity than the qPCR‐based method in detecting tiny amounts of eDNA. When combined with reverse transcription of environmental RNA (eRNA), our method increased detection sensitivity by approximately one order of magnitude. Cas13‐based detection could achieve on‐site detection of eDNA using a quick nucleic acid extraction solution and lateral flow strips. Cas13‐based detection of eDNA and eRNA requires minimal training efforts and can be performed in 1 h, without the need for centrifugation and qPCR machines. The portability of the Cas13‐based method, along with its accuracy and relative ease in designing primers and CRISPR RNA (crRNA), underscores its potential to broaden the application of eDNA and eRNA in various fields, including biodiversity conservation.

Elevating Oxygen Evolution using Iron Phthalocyanine Infused Vanillic acid Electrocatalyst.

Oxygen evolution reaction (OER) is the bottle neck step in water splitting reaction towards the realization of hydrogen based clean energy production and storage. Transition metal based N4 organics are explored extensively as oxygen electrocatalysts i.e.,(OER) and oxygen reduction reaction (ORR) catalysts because of their ease of synthesis, tuneable properties, low cost and high performance with long term stability. Here, vanillic acid functionalized iron phthalocyanine (FeVAPc) was synthesised and characterised. The novel FeVAPc exhibited good thermal stability and was coated on Ni foam for OER studies. The scanning electron microscopy images showed net-work like surface morphology and the X-ray photoelectron spectroscopy indicated the presence of Fe in +3 oxidation state. The Ni/FeVAPc demonstrated excellent electrocatalytic activity for OER with overpotential of 312 mV at 10 mA.cm-2 current density in 1.0 M KOH . The designed catalyst exhibited lesser Tafel slope value which is nearer to the benchmark catalyst, IrO2. The proposed catalyst exhibited good stability as phthalocyanines are highly stable and do not undergo decomposition even in strong acidic and basic corrosive media. Integration of FeVAPc onto Ni foam resulted in higher mass activity, lower charge transfer resistance, high active surface area leading to enhanced conductivity and activity.

Hydrogenation of phenol to cyclohexanone catalyzed by isolated Pd cations in the micropores of zeolite

Cyclohexanone is a key raw material for manufacturing nylon and other chemicals. The sustainable conversion of biomass-derived phenol to cyclohexanone meets the requirements of sustainable development goal but still be challenging. Herein, a catalyst containing isolated Pd cations in zeolite, namely Pd1/ZSM-5, is investigated for the partial hydrogenation of phenol to cyclohexanone. Under 140 °C and 1.5 MPa of initial hydrogen pressure, the conversion of phenol reaches 95.6% with the selectivity to cyclohexanone of 99.9%. Besides, the turnover rate (TOR) of partial hydrogenation of phenol reaches 382.7 h−1. The mild adsorption affinity of cyclohexanone on catalytic sites leads to the high selectivity. Moreover, as unveiled by surface reactivity of phenol monitored by in-situ infrared spectrum, the oxygen atom of phenol hydroxyl group is adsorbed on the Brönsted acid site of Pd1/ZSM-5 as the key reaction step. The reaction intermediate involves the partial hydrogenation of benzene ring of phenol.

Model-Assisted Optimization of Xylose, Arabinose, Glucose, Mannose, Galactose and Real Hemicellulose Streams Dehydration To (Hydroxymethyl)Furfural and Levulinic Acid.

Conversion of hemicellulose streams and the constituent monosaccharides, xylose, arabinose, glucose, mannose, and galactose, was conducted to produce value-added chemicals, including furfural, hydroxymethylfurfural (HMF), levulinic acid and anhydrosugars. The study aimed at developing a kinetic model relevant for direct post-Organosolv hemicellulose conversion. Monosaccharides served as a tool to in detail describe the kinetic behavior and segregate contribution of hydrothermal decomposition and acid catalyzed dehydration at the temperature range of 120-190 °C. Catalyst free aqueous media demonstrated enhanced formation of furanics, while elevated temperatures led to significant saccharide isomerization. The introduction of sulfuric and formic acids maximized furfural yield and significantly reduced HMF concentration by facilitating its rehydration into levulinic acid (46 mol%). Formic acid additionally substantially enhanced formation of anhydrosaccharides. An excellent correlation between modeled and experimental data enabled process optimization to maximize furanic yield in two distinct hemicellulose streams. Sulfuric acid-containing hemicellulose stream achieved the highest furfural yield after 30 minutes at 238 °C, primarily due to the high Ea for pentose dehydration (150 - 160 kJmol-1). Contrarily, formic acid-containing hemicellulose stream enabled maximal furfural yield at more moderate temperature and extended reaction time due to its lower Ea for the same reaction step (115 - 125 kJmol-1).

Olaparib Process Development Employing Quality by Design (QbD) Principles.

This study focuses on multivariate experimental design and statistical analysis to optimize the process of Olaparib 1. Quality by design (QbD) methodology was adopted for optimization of the Olaparib process consisting of three reaction steps: (1) amidation, (2) deprotection, and (3) acylation. Every chemical conversion was studied in isolation, employing risk assessment to identify key material attributes and key process parameters that may have the potential to impact the reaction. Thereafter, the screening design of experiment (DoE) was employed to scrutinize the factors that significantly impacted yield. Moving forward, the scrutinized factors which were found to impact the responses, the set of critical material attributes (CMAs) and critical process parameters (CPPs), were considered for optimization by applying I-Optimal design to define design space arriving at a robust setting wherein the predefined targets were supposedly optimal. To our delight, we got 95, 91, and 75% yield with more than 99% purity in amidation, deprotection, and acetylation, respectively, which enabled us to systematically identify design space to meet the desired quality target of the product consistently. More importantly, to distinguish the CMAs and CPPs, these elements ought to be monitored to have control of the quality parameter throughout the active pharmaceutical ingredient (API) value chain until commercial manufacturing followed by marketing. Eventually, we have developed a greener process in comparison to precedented one for Olaparib 1.

Surface anchoring requirements for vanadia clusters on titanium oxide surfaces and their impact on activity for oxidative dehydrogenation of ethanol

Titanium oxide site requirements for the anchoring of catalytically active forms of dispersed vanadia species are investigated. Using a series of oxygen-modified titanium nitride materials, we systematically modify the available vanadia-anchoring moieties on the titanium-bearing support surface. This strategy in turn results in a very narrow size distribution of well-dispersed vanadia clusters anchored on the support. This synthesis technique ensures that only highly dispersed vanadia is present on the catalyst surface even at nominal monolayer coverages. A deeper insight into the catalytic behavior for ethanol partial oxidation of the active vanadia species is obtained by comparing intrinsic kinetic and thermodynamic parameters of kinetically relevant reaction steps (heat of ethanol adsorption, hydrogen abstraction activation energy, and the energetics of catalyst reoxidation). It is found that these parameters are dependent on the relative amount of oxygen in the titanium-bearing support and the resulting distribution of vanadia species, which validates the premise of a potential participation of lattice oxygen atoms of the titania support into the catalytic activity of active vanadia species.

Biological Rhythms Generated by a Single Activator-Repressor Loop with Inhomogeneity and Diffusion.

Common models of circadian rhythms are typically constructed as compartmental reactions of well-mixed biochemicals, incorporating a negative-feedback loop consisting of several intermediate reaction steps essentially required to produce oscillations. Spatial transport of each reactant is often represented as an extra compartmental reaction step. Contrary to this traditional understanding, in this Letter we demonstrate that a single activation-repression biochemical reaction pair is sufficient to generate sustained oscillations if the sites of both reactions are spatially separated and molecular transport is mediated by diffusion. Our proposed scenario represents the simplest configuration in terms of the participating chemical reactions and offers a conceptual basis for understanding biological oscillations and inspiring invitro assays aimed at constructing minimal clocks.