Stem Nodes Research Articles

Differentiation of Ayahuasca Samples According to Preparation Mode and Botanical Varieties Using Metabolomics

ABSTRACT Ayahuasca is a brew traditionally prepared with a mixture of Psychotria viridis leaves and Banisteriopsis caapi vine and has demonstrated therapeutic properties for depression. Knowledge of the brew composition is important to improve the therapeutic potential and decrease side effects if ayahuasca becomes an option for refractory depression treatment. Ultra-high performance liquid chromatography coupled to high-resolution mass spectrometry (UHPLC-HRMS) was applied to analyze 126 ayahuasca samples collected from different ayahuasqueiro groups and geographic origins. We were able to observe a differentiation in the metabolite composition of ayahuasca samples prepared by diverse ayahuasqueiro groups. These samples presented different antioxidant effects based on FRAP and ORAC assays. Exploratory statistical analysis demonstrated a trend of separating the samples according to the religious group. The most important identified compounds for differentiation of the brew prepared by distinct religious groups are glycosylated and/or phenolic compounds. The comparison based on the mode of ayahuasca preparation presented more variability than the comparison based on the botanical variety of B. caapi used. We conclude that ayahuasca samples prepared with “caupuri” or “tucunacá” separately exhibited differences in the analysis of L-glutamate and the metabolism of arginine and proline. This suggests that a possible variation in this pathway could explain the occurrence of swollen stem nodes in “caupuri,” one of the B. caapi varieties.

Positive Effects of Growth Retardants on Castor (Ricinus communis L.)

The perennial growth habit of castor plants (Ricinus communis L.) limits mechanical harvest because the plant grows very tall, when the environmental conditions are favorable and produces green flush interfering with mechanical harvesting. In order to prevent excessive growth plant growth, retardant are applied to modifying crop architecture. Present investigation was designed to study the effect of growth retardants on growth and yield parameters. The experiment was conducted at the regional agricultural research station, Palem farm of Professor Jayashankar Telangana Agricultural University, Nagarkurnool district, Telangana, taking locally available tall variety PCH-111. The experiment was laid out in Randomized Block Design with three replicates in Kharif, 2019. Treatments comprises of water spray, ethrel@500 ppm, ethrel@1000 ppm, CCC@1.5ml/lit, CCC@2.0 ml/lit and CCC@2.5 ml/lit and sprayings were done at expanding leaf in the 6th node of the primary stem, expanding leaf on the 8th node of the primary stem, appearance of the first inflorescence, one expanding leaf in a secondary stem after the appearance of the first inflorescence, and appearance of the second inflorescence. Results revealed that, plant growth retardants are effective in reducing plant height, whereas no spray recorded significant superior value for plant height (70.73 cm). For leaf number, there is no much deviations though ethrel treatment enhanced senescence in older leaves, newly developed leaves compensated the number but there was reduction in LAI, which were 1.70 and 2.18, respectively, in ethrel spray of 1000 ppm and 500 ppm. The yield reduction is lower in ethrel treatment due to lower capsule formation and lower spike length at higher concentration of ethrel. Hence, it is concluded that, retardant accelerates natural senescence and thus, acting as defoliants overcoming difficulties in mechanical harvesting.

Design and experimental evaluation of an intelligent sugarcane stem node recognition system based on enhanced YOLOv5s

Design and experimental evaluation of an intelligent sugarcane stem node recognition system based on enhanced YOLOv5s

Bioenergy sorghum nodal root bud development: morphometric, transcriptomic and gene regulatory network analysis.

Bioenergy sorghum's large and deep nodal root system and associated microbiome enables uptake of water and nutrients from and deposition of soil organic carbon into soil profiles, key contributors to the crop's resilience and sustainability. The goal of this study was to increase our understanding of bioenergy sorghum nodal root bud development. Sorghum nodal root bud initiation was first observed on the stem node of the 7th phytomer below the shoot apex. Buds were initiated near the upper end of the stem node pulvinus on the side of the stem opposite the tiller bud, then additional buds were added over the next 6-8 days forming a ring of 10-15 nascent nodal root buds around the stem. Later in plant development, a second ring of nodal root buds began forming on the 17th stem node immediately above the first ring of buds. Overall, nodal root bud development can take ~40 days from initiation to onset of nodal root outgrowth. Nodal root buds were initiated in close association with vascular bundles in the rind of the pulvinus. Stem tissue forming nascent nodal root buds expressed sorghum homologs of genes associated with root initiation (WOX4), auxin transport (LAX2, PIN4), meristem activation (NGAL2), and genes involved in cell proliferation. Expression of WOX11 and WOX5, genes involved in root stem niche formation, increased early in nodal root bud development followed by genes encoding PLTs, LBDs (LBD29), LRP1, SMB, RGF1 and root cap LEAs later in development. A nodal root bud gene regulatory network module expressed during nodal root bud initiation predicted connections linking PFA5, SPL9 and WOX4 to genes involved in hormone signaling, meristem activation, and cell proliferation. A network module expressed later in development predicted connections among SOMBRERO, a gene involved in root cap formation, and GATA19, BBM, LBD29 and RITF1/RGF1 signaling. Overall, this study provides a detailed description of bioenergy sorghum nodal root bud development and transcriptome information useful for understanding the regulation of sorghum nodal root bud formation and development.

First report of basal stem rot on sugarcane (var. Badila) caused by Sclerotium rolfsii in China.

Badila (Saccharum officinarum) is one of the important chewing cane in south China. During the year 2019-2020, as much as 60.2%-87.5% of sugarcane plants stem showed red rot developments were observed in the fields of Yongning District, Nanning city, Guangxi province. Symptomatic plants showed red rot at basal stem nodes and sheath, when the disease serious, the epidermis and aerial roots decomposed and exfoliated, then formed sclerotiums, the upper stem also occurred the symptom. Infected plant tissues were dissected into small pieces with 0.1 × 0.1cm in size and surface sterilized in 0.1% HCl2 for 2 min, followed by 75% ethanol for 30 s, rinsed three times with sterile distilled water. Then the tissues were placed onto potato dextrose agar (PDA) plates and incubated at 25 °C for 3 days. Numerous white globoid sclerotia were formed on PDA after 5 days of growth. The sclerotia (2 to 3 mm in diameter) were white at first and then gradually turned dark brown. Aerial mycelia usually formed many narrow hyphal strands 4 to 9 μm wide. Five uniform isolates were obtained from diseased sugarcane plants. Pathogenicity of representative strain W1 was confirmed by inoculating 120-day-old Badila plants grown in field. Five plants were inoculated with colonized agar discs (6mm in diameter) by applying toothpick tips to the lower part of the stem. Five non-inoculated plants served as control. The inoculated and non-inoculated plants were sprayed sterile water then incubated with plastic film for maintained high moisture. All the plants were placed inside of a growth chamber at 26 ± 2°C with a 14-h photoperiod and 80% relative humidity. All inoculated plants showed red rot at stem and sheath after 2 weeks, whereas the control plants were symptomless. By the third week, mycelium and sclerotia developed on the crown on the inoculated plants. The fungus was re-isolated from the artificially inoculated plants. To confirm the species-level identification, partial of the ribosomal DNA internal transcribed spacer (ITS), mitocondrial small subunit (SSU), and nuclear ribosomal large subunit (LSU) regions of representative strain W1 were amplified and sequenced using the primers pairs ITS1/ITS4 (White et al. 1990), ITS-Fu-F /ITS-Fu-R and SRLSU1//SRLSU2 (Kumar et al., 2016), respectively. The resulting ITS, SSU and LSU sequences were deposited in GenBank (GenBank accession no. MW620994, MW617878, and MW617872) and shared 99.42%, 100% and 100% sequence identity with Athelia rolfsii isolate (JN017199, OM319631, and MT225781). Phylogenetic analysis conducted with neighbor-joining (NJ) method using MEGA6.0 revealed that the isolate share a common clade with reference sequence of A. rolfsii in GenBank Data Library. Based on morphological and molecular characteristics, the fungus was identified as A. rolfsii (anamorph: Sclerotium rolfsii) (Paul et al. 2017; Paparu et al. 2020). Although S. rolfsii has been reported causing sugarcane sett rot in Australia (Bhuiyan et al., 2019) and seedlings of sugarcane in Indian (Gopi et al., 2023), as we know, this is the first report of sugarcane basal stem rot disease caused by this fungus in China. This study will be helpful for the prevention and control sugarcane basal stem rot in the future.

Hydroxamate Siderophores Intensify the Co-Deposition of Cadmium and Silicon as Phytolith-Like Particulates in Rice Stem Nodes: A Natural Strategy to Mitigate Grain Cadmium Accumulation.

Sequestration of cadmium (Cd) in rice phytolith can effectively restrict its migration to the grains, but how hydroxamate siderophore (HDS) affects phytolith formation within rice plants especially the fate of Cd and silicon (Si) remains poorly understood. Here, we found that the addition of HDS increased the content of dissolved Si and Cd in soil pore water as well as its absorption by the rice roots during the reproductive growth stage. HDS effectively trapped orthosilicic acid and Cd ions at the third stem nodes of rice plants via hydrogen bonds and chelation interactions, which then rapidly deposited on the xylem cell wall through hydrophobic interactions. Ultimately, Cd was immobilized as phytolith-like particulates in the form of CdSiO3. Field experiments verified that Cd accumulation was significantly reduced by 46.4% in rice grains but increased by 41.2% in rice stems after HDS addition. Overall, this study advances our understanding of microbial metabolites enhancing the instinctive physiological barriers within rice plants.

Identification of quantitative trait loci for lodging and related agronomic traits in soybean (Glycine max [L.] Merr.)

BackgroundLodging, a crucial agronomic trait linked to soybean yield, poses a significant challenge in soybean production. Nevertheless, there has been less research on soybean lodging compared to other important agronomic traits, hindering progress in breeding high-yield soybeans. Our goals were to investigate lodging, pinpoint quantitative trait loci (QTL) linked to lodging, and forecast potential candidate genes linked to this trait. To achieve this, we employed a recombinant inbred line (RIL) population derived from a cross between Guizao 1 and B13 (GB) across various environments.ResultsThe lodging score of the RIL population was found to be significantly positively correlated with flowering time, maturity time, plant height, number of main stem nodes, stem diameter, and internode length, with correlation coefficients ranging from 0.457 to 0.783. A total of 84 QTLs associated with soybean lodging and related traits were identified using the GB population. The contribution of phenotypic variance ranged from 1.26 to 66.87%, with LOD scores ranging from 2.52 to 69.22. Additionally, within these QTLs, a stable major QTL associated with lodging was newly discovered in the GB population. Out of the ten major QTLs associated with other related traits, nine of them were situated within the qLD-4-1 interval of the major lodging score locus, displaying phenotypic variations ranging from 12.10 to 66.87%. Specific alterations in gene expression were revealed through the analysis of resequencing data from the two parental lines, potentially indicating their significant roles in lodging. Subsequently, it was determined through qRT-PCR that four genes are likely to be the major genes controlling soybean lodging.ConclusionsThis study’s findings offer valuable insights into the genetic underpinnings of soybean lodging resistance traits. By comprehending the potential genetic factors associated with lodging, this research lays the groundwork for breeding high-yield soybeans with improved lodging resistance.

Exploration of Biomass-related Genes in the FOX-superroot Lines of Lotus corniculatus and its Impact on Agronomic Traits

Background: Identifying biomass-related genes to meet the increasing demand for food supply is important approach for agricultural and scientific efforts. In this study, we employed the Full-length cDNA Over-eXpressing gene hunting system (FOX hunting system) to identify biomass-related genes through ectopic expression of Arabidopsis thaliana full-length cDNA in bird’s-foot trefoil (Lotus corniculatus). Methods: A total of 66 FOX superroot lines (FSLs) from Lotus corniculatus cv. Viking were transferred in vermiculite after two weeks in half-strength Murashige and Skoog (MS) medium. These FSLs were then grown in a growth chamber for four weeks, during which their plant length and root length were measured. High biomass lines were selected from this group. FSL #83 and #121 were then grown for an additional four months in a greenhouse until they reached maturity, at which point they were evaluated for their agronomic traits. Result: Out of the 66 analyzed FSLs, 15 displayed superior growth characteristics in plant length and total root length. Arabidopsis cDNA, categorized into genes related to various functions such as membrane transport, photosystems, phytohormone synthesis, amino acid synthesis and unknown genes, was introduced into these lines. Two lines were grown to maturity in the greenhouse and their agronomic traits were analyzed in detail. FSL #83 expressed brassinosteroid biosynthetic pathway gene (CPD) led to significant differences in internode length, number of stems, number of flowers and above-ground dry matter weight compared to non-transgenic Super-growing roots (SR). On the other hand, FSL #121 expressed Asparaginyl-tRNA synthetase (SYNC1) gene exhibited increases in plant length and the number of stem nodes.

Regeneration and colonization abilities of submerged macrophytes under different fragment types and lengths: comparison of the invasive species Myriophyllum aquaticum and the native species Myriophyllum spicatum

Abstract Alien invasive species usually have strong regeneration and colonization abilities. However, whether invasive species have advantages in term of regeneration and colonization ability over native species requires further exploration. In this study, the effects of fragment types (with and without apical tips) and lengths (5, 10, and 15 cm) on the regeneration and colonization abilities of the invasive Myriophyllum aquaticum (M. aquaticum) and native Myriophyllum spicatum (M. spicatum) in China were studied. Fragments of M. aquaticum and M. spicatum without apical tips had an advantage in branch formation, and their regeneration ability was stronger than that of fragments with apical tips. With longer initial fragments, the root length of M. aquaticum were longer and its colonization ability was stronger. This resulted in an increase in plant length, stem node number, and biomass, with an increase in fragment length. But the colonization ability of M. spicatum do not stronger with longer fragment. On the whole, native M. spicatum had stronger regeneration and colonization abilities than the invasive species M. aquaticum. However, M. aquaticum had a higher survival rate and plant length, enabling it to quickly occupy living spaces. Our results suggest that management needs to strengthened for both M. aquaticum and M. spicatum to avoid biological invasion.

The effect of exogenous gibberellin and its synthesis inhibitor treatments for morphological and physiological characteristics of Tartary buckwheat

Gibberellin (GA3) is an important plant hormone involved in many physiological and developmental processes in plants. However, the physiological mechanism of GA3 on the regulation yield and grain shell thickness of Tartary buckwheat is still unclear. In this study, the thick-shelled cultivar “Jinqiao 2” and thin-shelled cultivar “Miku 18” were used to study the effects of different concentrations (0, 50, and 100 mg L−1) of exogenous GA3 and chlorocholine chloride (CCC, GA3 synthesis inhibitor) on the cellulose content, amylase, and sucrose synthase (SS) activity in grain shell and the yield of Tartary buckwheat. The application of exogenous GA3 can improve the cellulose content and the activity of amylase and SS in the grain shell of the two Tartary buckwheat varieties. It can also increase the main stem node number, main stem branch number, grains per plant, and yield. Compared with the control treatment (CK, 0 mg L−1), the 100 mg/L exogenous GA3 treatment increased the number of grains per plant, grain weight per plant, 1000-grain weight, and yield of Jinqiao 2 by 20.1%, 41.9%, 13%, and 34.7%, respectively. These items of Miku 18 were increased by 26%, 15.2%, 10.2%, and 23.8%. The application of CCC reduced the activity of amylase and SS and cellulose content in grain shell. In addition, it decreased the main stem node number, main stem branch number, grains per plant, and yield of Tartary buckwheat. In summary, exogenous GA3 treatment not only improved the yield of Tartary buckwheat but also increased the thickness of grain shell by enhancing the activity of amylase and SS and promoting the synthesis and accumulation of cellulose. The results can provide theoretical references for clarifying the physiological mechanism of the difference in shell thickness between Tartary buckwheat varieties.

TopoRoot+: computing whorl and soil line traits of field-excavated maize roots from CT imaging

BackgroundThe use of 3D imaging techniques, such as X-ray CT, in root phenotyping has become more widespread in recent years. However, due to the complexity of the root structure, analyzing the resulting 3D volumes to obtain detailed architectural root traits remains a challenging computational problem. When it comes to image-based phenotyping of excavated maize root crowns, two types of root features that are notably missing from existing methods are the whorls and soil line. Whorls refer to the distinct areas located at the base of each stem node from which roots sprout in a circular pattern (Liu S, Barrow CS, Hanlon M, Lynch JP, Bucksch A. Dirt/3D: 3D root phenotyping for field-grown maize (zea mays). Plant Physiol. 2021;187(2):739–57. https://doi.org/10.1093/plphys/kiab311.). The soil line is where the root stem meets the ground. Knowledge of these features would give biologists deeper insights into the root system architecture (RSA) and the below- and above-ground root properties.ResultsWe developed TopoRoot+, a computational pipeline that produces architectural traits from 3D X-ray CT volumes of excavated maize root crowns. Building upon the TopoRoot software (Zeng D, Li M, Jiang N, Ju Y, Schreiber H, Chambers E, et al. Toporoot: A method for computing hierarchy and fine-grained traits of maize roots from 3D imaging. Plant Methods. 2021;17(1). https://doi.org/10.1186/s13007-021-00829-z.) for computing fine-grained root traits, TopoRoot + adds the capability to detect whorls, identify nodal roots at each whorl, and compute the soil line location. The new algorithms in TopoRoot + offer an additional set of fine-grained traits beyond those provided by TopoRoot. The addition includes internode distances, root traits at every hierarchy level associated with a whorl, and root traits specific to above or below the ground. TopoRoot + is validated on a diverse collection of field-grown maize root crowns consisting of nine genotypes and spanning across three years. TopoRoot + runs in minutes for a typical volume size of \\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\:40{0}^{3}$$\\end{document} on a desktop workstation. Our software and test dataset are freely distributed on Github.ConclusionsTopoRoot + advances the state-of-the-art in image-based phenotyping of excavated maize root crowns by offering more detailed architectural traits related to whorls and soil lines. The efficiency of TopoRoot + makes it well-suited for high-throughput image-based root phenotyping.

A MYB family transcription factor TdRCA1 from wild emmer wheat regulates anthocyanin biosynthesis in coleoptile.

As important secondary metabolites in plants, anthocyanins not only contribute to colored plants organs, but also provide protections against various biotic and abiotic stresses. In this study, a MYB transcription factor gene TdRCA1 from wild emmer wheat regulating anthocyanin biosynthesis in wheat coleoptile was identified on the short arm of chromosome 7A in common wheat genetic background. The TdRCA1 overexpression lines showed colored callus, coleoptile, auricle and stem nodes, as well as up regulation of six anthocyanin-related structural genes. The expression of TdRCA1 was activated by light in a temporal manner. While coleoptile color of 48 and 60h dark-grown seedlings changed from green to red after 24h light treatment, those grown in dark for 72 and 96h failed to develop red coleoptiles after light restoration. Interestingly, the over expression of TdRCA1 resulted in increased resistance to Fusarium crown rot, a chronic and severe fungal disease in many cereal growing regions in the world. Our results offer a better understanding of the molecular basis of coleoptile color in bread wheat.

International Biological Flora: Trapa natans†

Abstract This account presents information on all aspects of the biology of Trapa natans L. (water caltrop and water chestnut) that are relevant to understanding its ecological characteristics and behaviour. The main topics are presented within the standard framework of the International Biological Flora: distribution, habitat, communities, responses to biotic factors, responses to environment, structure and physiology, phenology, floral and seed characters, herbivores and disease, history, conservation and global heterogeneity. The water caltrop is an annual herbaceous hydrophyte rooted in the sediment of water bodies, forming flexuous underwater stems that create a buoyant, light‐capturing leaf rosette at the water surface. The submerged stem nodes additionally bear linear leaves. These are replaced by photosynthetically active, pinnately branched structures and unbranched adventitious roots early on, which complement previously established roots on the hypocotyl, altogether facilitating anchorage, nutrient and water absorption, aeration and capture of subsurface irradiance. Solitary flowers pollinated primarily through autogamy and incidentally through entomophily give rise to a fully developed edible single‐seeded drupe with two to four barbed horns. Fruits are dispersed with the help of hydrochory, epizoochory and anthropochory. Throughout its lowland, global temperate, subtropical and tropical distribution in Eurasia and Africa, the thermophilic macrophyte is found in shallow, sun‐exposed, nutrient‐rich freshwater bodies with low‐velocity flows and steady water levels. These offer slightly acidic to mildly basic conditions. The accompanying soft substrate is usually characterized by a high organic matter content. Regularly co‐occurring with other macrophytes, some of which are also of conservation concern, such as those in rare stands of the association Trapetum natantis in Europe, the water caltrop has at times been outcompeted, though it may form monodominant stands, due to several competitive features. Formerly widespread in Europe, T. natans is today recognized as a rare, strictly protected macrophyte. It has been introduced to Australia and North America; on the latter continent, its naturalization, spread and aggressive overgrowth have led to extensive control efforts. Having been used as a crop since Neolithic times, it is still exploited in Asia for means of food production, phytoremediation, ornamental purposes, medication and alternative uses.

An Efficient and Rapid Protocol for Somatic Shoot Organogenesis from Juvenile Hypocotyl-Derived Callus of Castor Bean cv. Zanzibar Green.

Aseptic seedlings of different ages derived from surface-sterilized mature seeds were applied as an explant source. Various explants such as 7- and 21-day-old hypocotyl fragments, 42-day-old nodal stem segments, and transverse nodal segments of stem, as well as leaf petioles, were cultured on the agar-solidified Murashige and Skoog (MS) basal medium supplemented with 0.1 mg/L IAA, 5 mg/L AgNO3 and different types and concentrations of cytokinin (1 mg/L zeatin, 0.25 mg/L thidiazuron (TDZ), and 5 mg/L 6-benzylaminopurine (6-BAP)). Consequently, it was found that 7- and 21-day-old hypocotyl fragments, as well as nodal stem segments obtained from adult aseptic seedlings, are characterized by a high explant viability and callus formation capacity with a frequency of 79.7-100%. However, the success of in vitro somatic shoot organogenesis was significantly determined not only by the culture medium composition and explant type but also depending on its age, as well as on the size and explant preparation in cases of hypocotyl and age-matched nodal stem fragments, respectively. Multiple somatic shoot organogenesis (5.7 regenerants per explant) with a frequency of 67.5% was achieved during 3 subcultures of juvenile hypocotyl-derived callus tissue on MS culture medium containing 0.25 mg/L TDZ as cytokinin source. Castor bean regenerants were excised from the callus and successfully rooted on ½ MS basal medium without exogenous auxin (81%). In vitro plantlets with well-developed roots were adapted to ex vitro conditions with a frequency of 90%.

Effects of gamma-ray irradiation dose and dose rates on the growth and radiosensitivity of soybean varieties Grobogan and Mutiara 1

Abstract Enhancing soybean production can be achieved through plant breeding, utilizing gamma ray radiation mutation techniques to develop superior varieties. Understanding radiosensitivity is crucial for comprehending the impact of radiation on plant morphology and physiology. This study aims to investigate the impacts of varying doses and dose rates of Cobalt-60 gamma radiation on the growth and development of two soybean varieties, Grobogan and Mutiara 1. This study was conducted to understand how varied radiation doses influence growth parameters and to determine the radiosensitivity, LD50 value, in mutants of the Grobogan and Mutiara 1 soybean varieties. The study employed a randomized complete design with two factors. The first factor was radiation dose ranging from 0 to 1000 Gy. The second factor was dose rate, categorized into low dose rate (219.5 Gy/hour) and high dose rate (4470.2 Gy/hour). The results revealed that the LD50 value of Grobogan variety was estimated at 588.56 Gy at a low dose rate and 657.17 Gy at a high dose rate, while the Mutiara 1 variety had an LD50 value estimate of 512.36 Gy at a low dose rate and 514.30 Gy at a high dose rate. The study also found that the gamma ray radiation dose in the seedling phase trial influenced several growth parameters, including germination percentage, seedling height, development of stem nodes, and formation of leaves. Furthermore, field phase trial showed that a range of radiation dose at 100-300 Gy led to an increase in the number of branches in both soybean varieties and plant height in the Grobogan variety. It also resulted in an increase in the production of pods and total weight of seeds in the Mutiara 1 variety. These findings offer valuable insights into optimizing radiation doses for increasing genetic diversity in soybean.

Effects of foliar spraying different sizes of zinc fertilizer on the growth and cadmium accumulation in rice.

Nanotechnology has been widely applied in agricultural science. During the process of reducing metal toxicity and accumulation in rice, nanomaterials exhibit size effects. However, there is limited knowledge regarding these size effects. We aim to explore the impact of fertilizer with various sizes of ZnO nanoparticles (ZnO-NPs) on rice growth and cadmium (Cd) accumulation and to elucidate the potential mechanism of Cd reduction in rice. Foliar applications of different concentrations (0.5 and 2 mmol L-1) and different sizes (30 and 300 nm ZnO-NPs) of zinc (Zn) fertilizer (Zn(NO3)2) were performed to investigate the effects on rice growth, Cd accumulation and subcellular distribution, and the expression of Zn-Cd transport genes. The results suggested that all the foliar sprayings can significantly reduce the Cd concentrations in rice grains by 41-61% with the highest reduction in the application of ZnO-NPs with large size and low concentration. This is related to the enhancement of Cd fixation in leaf cell walls and downregulation of Cd transport genes (OsZIP7, OsHMA2, OsHMA3) in stem nodes. Foliar ZnO-NPs applications can increase the Zn concentration in grains by 9-21%. Foliar applications of Zn(NO3)2 and small-sized ZnO-NPs promoted plant growth and rice yield, while the application of large-sized ZnO-NPs significantly reduced rice growth and yield. The study suggests that the rice yield and Cd reduction are dependent on the size and concentration of foliar spraying and the use of large-sized ZnO-NPs is the most effective strategy when considering both yield and Cd reduction comprehensively. © 2024 Society of Chemical Industry.

Effects of water temperature on growth of invasive Myriophyllum aquaticum species

This study sought to investigate the invasive mechanism of Myriophyllum aquaticum by subjecting it to simulation experiments in varying water temperatures ranging from 0 °C to 30 °C. The results showed that water temperature considerably affected both the growth and reproduction of M. aquaticum. The optimal temperature range for the growth of M. aquaticum was 25‒30 °C. Although the growth of M. aquaticum was inhibited at temperatures between 0‒5 °C, this did not result in mortality. The stem nodes, branches, and diameter reached maximum values over a temperature range of 20‒25 °C. High-temperature stress at 30 °C led to a gradual decrease or disappearance of branches. Compared to the 0 °C, 5 °C, and 30 °C treatment groups, a temperature of 20 °C led to biomass accumulation and significantly higher values. M. aquaticum’s physiological activities were affected by temperature. Except for 10 °C and 15 °C, the catalase activity varied among different water temperatures. M. aquaticum catalase activity was maximal at 5 °C and minimal at 25 °C. Conversely, the synthesis of photosynthetic pigments was highest at 10 °C and 15 °C. The plant’s optimal temperature for growth was between 20 °C and 25 °C. When the temperature was <10 °C, M. aquaticum adapted to the water temperature’s potential damage. This plant has a notable ability to tolerate various temperatures.

Potassium fertilizer promotes the thin-shelled Tartary buckwheat yield by delaying senescence and promoting grain filling.

The application rate of potassium fertilizer is closely related to the yield of crops. Thin-shelled Tartary buckwheat is a new variety of Tartary buckwheat with the advantages of thin shell and easy shelling. However, little is known about application rate of potassium fertilizer on the yield formation of thin-shelled Tartary buckwheat. This study aimed to clarify the effect of potassium fertilizer on the growth and yield of thin-shelled Tartary buckwheat. A field experiment to investigate the characteristics was conducted across two years using thin-shelled Tartary buckwheat (Miku 18) with four potassium fertilizer applications including 0 (no potassium fertilizer, CK), 15 (low-concentration potassium fertilizer, LK), 30 (medium-concentration potassium fertilizer, MK), and 45 kg·ha-1 (high-concentration potassium fertilizer, HK). The maximum and average grain filling rates; starch synthase activity; superoxide dismutase and peroxidase activities in leaves; root morphological indices and activities; available nitrogen, phosphorus, and organic matter content in rhizosphere soil; urease and alkaline phosphatase activities in rhizosphere soil; plant height, main stem node number, main stem branch number, leaf number; grain number per plant, grain weight per plant, and 100-grain weight increased first and then decreased with the increase in potassium fertilizer application rate and reached the maximum at MK treatment. The content of malondialdehyde was significantly lower in MK treatment than in other three treatments. The yields of thin-shelled Tartary buckwheat treated with LK, MK, and HK were 1.22, 1.37, and 1.07 times that of CK, respectively. In summary, an appropriate potassium fertilizer treatment (30kg·ha-1) can delay the senescence, promote the grain filling, and increase the grain weight and final yield of thin-shelled Tartary buckwheat. This treatment is recommended to be used in production to achieve high-yield cultivation of thin-shelled Tartary buckwheat.

A GDSL-motif Esterase/Lipase Affects Wax and Cutin Deposition and Controls Hull-Caryopsis Attachment in Barley.

The cuticle covering aerial organs of land plants is well known to protect against desiccation. Cuticles also play diverse and specialized functions, including organ separation, depending on plant and tissue. Barley shows a distinctive cuticular wax bloom enriched in β-diketones on leaf sheaths, stem nodes and internodes and inflorescences. Barley also develops a sticky surface on the outer pericarp layer of its grain fruit leading to strongly adhered hulls, 'covered grain', important for embryo protection and seed dispersal. While the transcription factor-encoding gene HvNUDUM (HvNUD) appears essential for adherent hulls, little is understood about how the pericarp cuticle changes during adhesion or whether changes in pericarp cuticles contribute to another phenotype where hulls partially shed, called 'skinning'. To that end, we screened barley lines for hull adhesion defects, focussing on the Eceriferum (= waxless, cer) mutants. Here, we show that the cer-xd allele causes defective wax blooms and compromised hull adhesion, and results from a mutation removing the last 10 amino acids of the GDS(L) [Gly, Asp, Ser, (Leu)]-motif esterase/lipase HvGDSL1. We used severe and moderate HvGDSL1 alleles to show that complete HvGDSL1 function is essential for leaf blade cuticular integrity, wax bloom deposition over inflorescences and leaf sheaths and pericarp cuticular ridge formation. Expression data suggest that HvGDSL1 may regulate hull adhesion independently of HvNUD. We found high conservation of HvGDSL1 among barley germplasm, so variation in HvGDSL1 unlikely leads to grain skinning in cultivated barley. Taken together, we reveal a single locus which controls adaptive cuticular properties across different organs in barley.

Molecular phylogeny and spatio‐temporal diversification of the Millettioid/Phaseoloid clade (Fabaceae: Papilionoideae)

AbstractThe Millettioid/Phaseoloid (or the Millettioid) clade is a major lineage of the subfamily Papilionoideae (Fabaceae) that is poorly understood in terms of its diversification and biogeographic history. To fill this gap, we generated a time‐calibrated phylogeny for 749 species representing c. 80% of the genera of this clade using nrDNA ITS, plastid matK, and plastome sequence (including 38 newly sequenced plastomes). Using this phylogenetic framework, we explored the clade's temporal diversification and reconstructed its ancestral areas and dispersal events. Our phylogenetic analyses support the monophyly of the Millettioid/Phaseoloid clade and four of its tribal lineages (Abreae, Desmodieae, Indigofereae, and Psoraleeae), while two tribal lineages sensu lato millettioids and phaseoloids are polyphyletic. The fossil‐calibrated dating analysis showed a nearly simultaneous divergence between the stem node (c. 62 Ma) and the crown node (c. 61 Ma) of the Millettioid/Phaseoloid clade in the Paleocene. The biogeographic analysis suggested that the clade originated in Africa and dispersed to Asia, Europe, Australia, and the Americas at different periods in the Cenozoic. We found evidence for shifts in diversification rates across the phylogeny of the Millettioid/Phaseoloid clade throughout the Cenozoic, with a rapid increase in net diversification rates since c. 10 Ma. Possible explanations for the present‐day species richness and distribution of the Millettioid/Phaseoloid clade include boreotropical migration, frequent intra‐ and intercontinental long‐distance dispersals throughout the Cenozoic, and elevated speciation rates following the Mid‐Miocene Climatic Optimum. Together, these results provide novel insights into major diversification patterns of the Millettioid/Phaseoloid clade, setting the stage for future evolutionary research on this important legume clade.