Stearic Acid Methyl Ester Research Articles

Development of method and analysis protocol for fatty acids derivatives of castor oil by using gas chromatography-mass spectrometry

Castor oil is a vegetable oil extracted from castor beans, known for its diverse applications across the chemical industry, food industry, skincare products, biodiesel components, and pharmaceuticals. Analyzing the fatty acid composition of castor oil using Gas Chromatography-Mass Spectrometry (GC-MS) can be complex due to various factors inherent to fatty acids and the oil's composition. Therefore, the goal of this study is to effectively separate and analyze the major fatty acids present in castor oil using GC-MS. Castor oil was methylated using alcoholic potassium hydroxide, then neutralized with salicylic acid and centrifuged. The supernatant was diluted and injected into the GC-MS with a developed temperature program. The results indicated that castor oil contains five fatty acids: ricinoleic acid methyl ester, oleic acid methyl ester, linoleic acid methyl ester, stearic acid methyl ester, and palmitic acid methyl ester, with respective concentrations of 87.63%, 1.81%, 6.57%, 2.93%, and 1.07%. Among these, methyl ricinoleate was the most abundant at approximately 87.36%, while palmitic acid methyl ester had the lowest concentration at 1.07%. The order of fatty acids detected was methyl ricinoleate > linoleic acid > stearic acid > oleic acid methyl ester > palmitic acid. To our knowledge, this is the first report of an easy and efficient method for the analysis of castor oil. In conclusion, the developed methylation of castor oil and gas chromatography temperature program are suitable for the routine analysis of castor oil.

Decoding organic compounds in lava tube sulfates to understand potential biomarkers in the Martian subsurface

Exploring molecular biomarkers in lava tube speleothems offers insights into environmental dynamics, biogeochemical processes, and subsurface life, with implications for astrobiology, particularly in Martian analog environments. Despite extensive biomarker research in marine and terrestrial settings, lava tube studies are limited. This study employed molecular, isotope and mineralogical characterization to analyze sulfate speleothems from six lava tubes of Lanzarote (Canary Islands), considered analog for the Moon and Mars. The combination of mass spectrometry, thermogravimetry, and mineralogical techniques, revealed geological processes, biomarkers and their biological sources. The identified minerals were primarily calcium and sodium sulfates. Sulfur isotope analyses indicated volcanic and oceanic origins, while carbon isotope composition and pyrolysis analyses suggested influences from vegetation and microbial activity. Lipidic profiles highlighted branched and n-alkanes, as well as palmitic and stearic acid methyl esters, suggesting microbial origins. These findings contribute to understanding geological and environmental dynamics in lava tubes and recognizing potential biosignatures on Earth and other planets.

Unveiling the Bioactive Potential of Bacterial Isolates from Extreme Environments of Pakistan by In Vitro and In Silico Approaches.

The soil hosts a wide array of bacterial species capable of producing diverse bioactive compounds. This research aimed to screen bacterial isolates for their bioactive potential from extreme environments in Pakistan. Out of the 69 isolates examined, only 7 exhibited antagonistic activity against Bacillus sp. and Escherichia coli test strains. Notably, the B. cereus DS-2 strain demonstrated the highest antibacterial potential (31mm and 15mm) against the Bacillus and E. coli test strains, respectively. Mode-of-action studies suggested that the crude extract might have induced morphological abnormalities in the Bacillus sp. (test strain), causing cell contraction, chain breakage, and deformation. Furthermore, the B. cereus DS-2 strain displayed significant antioxidant potential (64.8%) as revealed by the 2,2-Diphenyl-1-picrylhydrazyl (DPPH) radical scavenging assay. Thin-layer chromatography (TLC) of the DS-2crude extract led to the separation of six components, with only spots 3 and 4 exhibiting the antibacterial potential (3mm and 5mm, respectively). Subsequently, gas chromatography-mass spectrometry (GC-MS) analysis of the bioactive fraction extracted from TLC revealed the presence of diisooctyl phthalate, dibutyl phthalate, hexadecanoic acid methyl ester, and octadecanoic acid methyl ester. Molecular docking analysis of diisooctyl phthalate and dibutyl phthalate revealed their binding affinity against E. coli and Bacillus sp. targets. ADMET analysis confirmed the solubility, toxicity, and drug-like properties of the ligands based on Lipinski's rule of five. Current findings suggest that these compounds hold promise as antibacterial agents in drug development. This study underscores the diverse microbial community present in extreme environments and highlights the versatile applications of natural products derived from these strains.

GC/MS evaluation of the composition of the Aloe vera gel and extract

This study aimed to investigate the potential use of Aloe vera (AV) as a food additive given its critical importance in food safety and health. Specifically, the natural antimicrobial and antioxidant properties of AV were examined to prevent food spoilage and extend its shelf life. This study was conducted using commercially available aloe vera gel (AVG) and aloe vera extract (AVE). These samples were tested using gas chromatography–mass spectrometry (GC–MS). The analysis involves identifying and quantifying the components using natural helium gas. The antimicrobial and antifungal effects of these components were evaluated and compared with those reported in the literature. GC–MS analysis revealed that the Aloe vera gel and extract contained various volatile components, including phenolic compounds, anthraquinone glycosides, and different esters. According to GC–MS results of the two different forms of AV, the main volatile compounds of the gel form were levoglucosan, tridecanoic acid, decanoic acid methyl ester, octadecanoic acid methyl ester, octadecanoic acid, nonadeca-1.18-diyn-4.16-diol and squalene, whereas the extract form contained volatile compounds with antifungal activity such as tridecanoic acid, octadecanoic acid methyl ester, octadecanoic acid, nonanoic acid and eicosyl acetate. Both samples exhibited antimicrobial and antifungal activities, especially against pathogens such as Staphylococcus aureus, Candida albicans, Aspergillus niger, and Escherichia coli. This study demonstrated the potential of Aloe vera gel and extract as a natural preservative for use in food because of its constituent components. This study highlights the potential use of Aloe vera as a natural additive in the food industry. Due to its antimicrobial and antifungal properties, Aloe vera offers an organic alternative to chemical additives. Aloe vera is effective at preventing food spoilage and extending shelf life, making it a suitable option for meeting consumer demand for organic and natural products.

Oleochemical Synthesis of Sucrose Esters from Methyl Esters of Palm Stearic and Oleic Fatty Acids

Abstract Palm oil contains fatty acids such as stearic ranges from 3.40 – 5.47% and oleic ranges from 34.85 – 40.78% which can be used as materials for the synthesis of sucrose ester. This study aimed to increase and optimize the potential of palm oil raw materials through the oleochemical synthesis of sucrose ester. The process of sucrose ester synthesis consisted of two stages, i.e., the esterification process of fatty acids into methyl esters and the transesterification process of fatty acid methyl esters with sucrose to become sucrose esters. Esterification of stearic and oleic fatty acids was performed using H2SO4 catalyst and methanol as a solvent. Transesterification of sucrose with stearic and oleic methyl esters was performed using two types of catalysts K2CO3 6% and Na2CO3 6%, without solvents. The results showed that sucrose ester made from stearic acid methyl ester with K2CO3 catalyst tended to achieve better performance and physicochemical properties as follows: pH ranged from 10.29 – 10.45, foam stability ranged from 55.497 – 88.082%, emulsion stability ranged from 40.211 – 78.435%, surface tension ranged from 25.4 – 27.60 dyne/cm, and interfacial tension ranged from 9.69 – 10.91dynes/cm.

Exploring the healing power of Pistacia lentiscus stems: insights into extraction methods, polyphenolic composition, and health-promoting activities

ABSTRACT This work aimed to evaluate the effect of different extraction solvents on the polyphenolic content, antioxidant and antibacterial activity of Pistacia lentiscus stems. The results obtained show that the extraction yield depends strongly on the polarity of the solvent and the extraction method. The ethanolic extract had the highest yield in both extraction methods investigated, namely Soxhlet (R = 9.89%) and cold maceration (R = 9.20%). The free radical scavenging activity of the extracts showed that the ethanolic extract had the highest antioxidant activity in both extraction methods with an IC50 = 0.023 mg/mL (cold maceration) and an IC50 = 0.034 mg/ml (Soxhlet). The HPLC analysis of the extracts indicates that gallic acid and catechin are the major phenolic compounds. The FTIR results showed that the shift of the stretching is responsible for O-H and C-H bonding. The GC-MS analysis revealed the presence of stearic acid and palmitic acid methyl ester as main compounds. The bacterial analysis of the extracts showed that the aqueous extract represents the most active one against Staphylococcus aureus and Pseudomonas aeruginosa; on the other hand, no antifungal activity was appreciated. Overall, the results indicate that the investigated extracts might be considered valuable sources of bioactive compounds.

Phytochemical Screening and Gas Chromatography-Mass Spectrometry Analysis of Bioactive Compounds Present in Stem Bark of <i>Picralima nitida </i>(stapf)

Over the years, traditional societies and ethnic nationalities have engaged plants with medicinal properties for the treatment of a range of diseases without any scientific knowledge of it inherent bioactive compounds that are responsible for its medicinal and pharmacological potentials. The aim of this study is to screen for the presence of phytochemical constituents and to identify the bioactive compounds domicile in the stem bark of <i>Picralima nitida </i>by the use of Gas Chromatography - Mass Spectrometry. The result of the quantitative investigation of the stem bark extract of <i>P. nitida</i> showed the presence of some phytochemical compounds such as saponins (3.22%), alkaloids (2.43%), flavonoids (6.05%) tannins (6.25%), oxalate (12.70%), phytate (2.87%), anthracene glycosides (2.14%) and cyanogenic glycosides (1.37%). Eleven (11) different bioactive compounds were recognized in the stem bark extract of <i>P. nitida</i> by Gas Chromatography - Mass Spectrometry analysis. The percentage of major bioactive compounds were vitamin E (69.31%), Cis-Myrtanol (5.57%), Octadecanoic acid methyl ester (4.52%), 11-Octadecenoic acid methyl ester (4.42%), 9-Methyl-2-phenyl-9H-imidazo (1,2-a) benzimidazole (3.70%), Pentadecanoic acid 14-methyl- methylester (3.21%) and 7,9-Dimethyl-6H-Indolo (2,3-b) quinoxaline (3.11%). From these findings, it could be concluded that <i>P. nitida </i>stem bark is rich in various bioactive compounds which possess antioxidant, laxative and other diverse medicinal properties. Therefore, it can be recommended as a plant of phytomedicinal value.

Study on Oxidation Activity of Hydrogenated Biodiesel–Ethanol–Diesel Blends

In the pursuit of understanding the oxidation mechanisms of hydrogenated biodiesel fuels and elucidating the combustion behavior of biomass fuels when blended with diesel, this study presents a comprehensive investigation into the reaction mechanism of hydrogenated biodiesel–ethanol–diesel mixtures. We develop a comprehensive reaction mechanism encompassing 187 components and 735 reactions for hydrogenated biodiesel–ethanol–diesel mixtures. Through kinetics analysis under varied conditions, including 1.0 MPa pressure, an equivalence ratio of 1.0, and temperatures of 900 K and 1400 K, we explore the impact of cross-reactions and changing fuel blend ratios on low- and high-temperature oxidation. Our findings indicate that oleic and stearic acid methyl esters serve as better substitutes for representing hydrogenated biodiesel kinetics than methyl decanoate. At lower temperatures, increased hydrogenated biodiesel and ethanol content leads to reduced OH generation, impacting reactivity. Conversely, higher temperatures result in enhanced OH production with increased hydrogenated biodiesel and ethanol concentrations, promoting reactivity. A cross-reaction analysis reveals CH2O as a prominent product, with the CH2O→HCO→CO pathway playing a pivotal role. In summary, our research unveils the intricate oxidation mechanisms of hydrogenated biodiesel–ethanol–diesel mixtures, providing insights into their combustion characteristics and offering implications for optimizing fuel blends for cleaner and more efficient energy solutions.

A membrane targeted multifunctional cationic nanoparticle conjugated fusogenic nanoemulsion (CFusoN): induced membrane depolarization and lipid solubilization to accelerate the killing of Staphylococcus aureus.

Bacterial infections caused by Staphylococcus aureus are one of the growing concerns for human health care management globally. Antibiotic-associated adverse effects and the emergence of bacterial resistant strains necessitate the development of an alternative yet effective approach. Nanoemulsion-based therapy has emerged as a potential therapeutic strategy to combat bacterial infestation. Herein, we designed a cationic metal nanoparticle-conjugated fusogenic nanoemulsion (CFusoN) as a lipid solubilizing nanovesicle for the effective treatment of S. aureus infection with a killing efficiency of 99.999%. The cationic nanoparticle-conjugated nanoemulsion (viz. NECNP) (24.4 ± 2.9 mV) electrostatically bound with the negatively charged bacterial cell membrane (-10.2 ± 3.7 mV) causing alteration of the bacterial surface charge. The fluorometric and flow cytometry studies confirmed the bacterial membrane depolarization and altered cell membrane permeability leading to cell death. The atomic force microscopic studies further demonstrated the damage of the cellular ultrastructure, while the transmission electron microscopic image and membrane lipid solubilization analysis depicted the solubilization of the bacterial membrane lipid bilayer along with the leakage of the intracellular contents. The cell membrane fatty acid analysis revealed that the methyl esters of palmitic acid, stearic acid and octadecadienoic acid isomers were solubilized after the treatment of S. aureus with CFusoN. The bactericidal killing efficiency of CFusoN is proposed to occur through the synergistic efficacy of the targeted attachment of CNP to the bacterial cells along with the lipid solubilization property of NE. Interestingly, NECNP didn't elicit any in vitro hemolytic activity or cytotoxicity against red blood cells (RBCs) and L929 fibroblast cells, respectively, at its bactericidal concentration. Furthermore, a porcine skin wound infection model exhibited the enhanced wound cleansing potency of CFusoN in comparison to the commercially available wound cleansers. The obtained antibacterial activity, biocompatibility and skin wound disinfection efficacy of the NECNP demonstrated the formulation of a cell targeted CFusoN as a promising translatable strategy to combat bacterial infection.

PERBANDINGAN RENDEMEN EKSTRAKSI KECOMBRANG (Etlingera elatior) MENGGUNAKAN METODE MASERASI DAN SOKLETASI

Torch ginger (Etlingera elatior) contains secondary metabolites that have antibacterial potential. The production of torch ginger extract in Indonesia is still limited. However, market demand increase because pharmaceutical industry is starting to use the torch ginger extract. Furthermore, the growing utilization of torch ginger will enhance the economy of torch ginger farmers. This study aims to compare the extraction efficiency of maceration and soxhletation methods in obtaining bioactive compounds from torch ginger using ethanol, methanol and n-hexane as solvents. The results showed that in the maceration method, ethanol solvent produced the highest yield of 15%, methanol 7% and n-hexane 3%. In soxhletation method, ethanol and methanol solvents produced yields of 15% and 13% respectively, higher than n-hexane only 1%. Overall, soxhletation method with ethanol solvent was the best condition for torch ginger extraction. GC-MS characterization showed the presence of bioactive compounds such as 2-Chloropropionic acid, Boric acid trimethyl ester, Silane dimethoxymethyl and Octadecanoic acid methyl ester which contribute to the antibacterial activity in torch ginger essential oil.

Eco-technological approaches for textile dye effluent treatment and carbon dioxide (CO2) capturing using green microalga Chlorella vulgaris

In this present study, the microalgae strain Chlorella vulgaris was isolated from freshwater and the microalgal strain was used for biosorption of textile dye and carbon dioxide. The Chlorella vulgaris microalgal strain was removed 96.33% (qmax) of textile dyes from textile effluent at 15 days of treatment using Langmuir and Freundlich kinetics biosorption model and achieved higher R2 value 0.95. The 94.98 percent of carbon dioxide (CO2) was utilized, 221.17 mgg−1 lipid, 193.12 mgg−1 carbohydrate, 4.14 mgmL−1 of biomass, 3.86 mLg−1 of biodiesel and 3.78 mLg−1 of bioethanol were produced by Chlorella vulgaris microalgal strain. The bioethanol was identified at 71552.1236 μV sec-1 and 3.68 min peak retention time using by high-performance liquid chromatography (HPLC). The 10 major biodiesel compounds were identified viz., Pentadecanoic acid, Eicosanoic acid methyl ester, cis-7-Hexadecenoic acid methyl ester, Hexadecenoic acid methyl ester, Octadecanoic acid methyl ester, Heptadecatrienoic acid methyl ester, Tetradecanoate methyl ester and Tridecanoic acid methyl ester using gas chromatography-mass spectrometry (GCMS) analysis.

Cultivation of Microalgae Spirulina platensis Biomass Using Palm Oil Mill Effluent for Phycocyanin Productivity and Future Biomass Refinery Attributes

Palm oil mill effluent is a type of wastewater which contains a high concentration of organic nitrogen, phosphorus, and different supplement substances. These substances support and enhance the growth of microalgae. Cyanobacteria Spirulina platensis is a blue-green microalga with two phycobiliproteins as its primary constituents. Phycocyanin is a natural blue colourant used in biomedicines, cosmetics, diagnostics, treatments, and environmental protection. Chlorophyll pigment plays a significant role in photosynthesis where the photosynthetic process uses atmospheric carbon to produce starch and lipid which can eventually be converted into desirable products such as biodiesel. Therefore, in this study, Spirulina platensis was cultivated in different concentrations of diluted POME (10-50%, v / v ) at 26 ± 1 °C room temperature, 90 μmol photon m-2 s-1, and aerated for 24 h continuously. The growth of Spirulina platensis was monitored through optical density at 680 nm for 15 days. The highest biomass yield obtained in the control medium and 30% POME medium were 1.27 ± 0.02 and 1.16 ± 0.01 g/L, respectively. The highest phycocyanin yield obtained from the biomass harvested from 30% nutrient media was 175.12 ± 22.32 mg and followed by 163.55 ± 20.15 mg from control media with purified phycocyanin of 87.11 ± 5.20 mg and 85.31 ± 4.33 mg, respectively. The peak properties of phycocyanin such as the amide group at 1655.17 cm-1 (C=O stretching), FT-IR analysis revealed well-formed Spirulina platensis with all characteristic peaks and distinct fingerprints of phycocyanin. The ultrasound method produces the highest lipid yield ( 28.6 ± 0.7 %) which consists of stearic (38.45%), palmitoleic ( 25.72 ± 0.02 ), and palmitic ( 17.71 ± 0.04 ) fatty acid methyl esters. The FAME produced from the extracted lipid has the potential to be used in biodiesel applications. Since POME contains the essential nutrients which can support the growth of Spirulina platensis in the optimum environment for biomass and lipid productivity, it revealed the potential for biodiesel production.

Phytochemical Profiling and GC-MS Analysis of Extracts of Two Tropical Moss Species

The crude extracts obtained from two tropical moss species namely: Philonotis hastata (Duby) Wijk & Margad and Barbula lambaranensis C. Mull were analysed with a view to identifying the bioactive compounds present in them. The mosses were collected from their natural population and air dried at ambient temperature in the laboratory for fourteen days. The aqueous extracts were subjected to phytochemical analysis using standard methods while the n- hexane extracts were subjected to gas chromatography-mass spectrometry (GC-MS) analysis. The results of the phytochemical screening showed the presence of alkaloids (0.189mg/g), saponins (0.047mg/g) and flavonoids (22.35QE/g) in P. hastata while the alkaloids, saponins and flavonoids content in B. lambaranensis were 0.184mg/g, 0.037mg/g and 14.18QE/g respectively. Steroids and reducing sugars were also present in the two moss species. The results of the GC-MS analysis showed the presence of 23 compounds in P. Hastate with 9-Octadecenoic acid methyl ester, 9,12-Octadecadienoic acid (Z,Z)- methyl ester, cis-Vaccenic acid, Hexadecanoic acid methyl ester and 1- Phenanthrenecarboxylic acid, tetradecahydro-7-(2-methoxy-2-oxoethlidene)-1,4a,8-trimethyl-9-oxo-, methyl ester forming the major components while in B. lambaranensis, 31 compounds were present from which Hexadecanoic acid methyl ester, 9,12-Octadecadienoic acid methyl ester, 13-Tetradecenal, 9-Octadecenoic acid (Z)- methyl ester and Hexadecanoic acid, 2-hydroxy-1-(hydroxymethyl)ethyl ester formed the prominent components. Five compounds: Hexadecanoic acid methyl ester, n-Hexadecanoic acid, cis-Vaccenic acid, Octadecanoic acid and 9-Octadecanoic acid methyl ester were commonly identified in the two moss species. The identified compounds are considered to be biologically and pharmacologically important. Further investigation on the identified bioactive compounds from the studied moss species will be beneficial to formulate novel drugs for the treatment and management ...

Analysis of Fatty Acid Composition Using GC-MS Method and Antibacterial Activity Test of n-Hexane Extract from Petai Seeds (Parkia speciosa Hassk.)

Analysis of fatty acid composition using GC-MS method and antibacterial activity test of n-hexane extract from Petai seed (Parkia speciosa Hassk.) has been performed. Fatty acid was extracted from petai seed by maceration method using n-hexane solvent to produce n-hexane extract converted into fatty acid methyl ester through a methanolysis reaction. Then fatty acid composition was analyzed using the GC-MS method. The result of GC-MS analysis showed that the fatty acid composition found in 760 gr petai seeds which produced 11.16 g of fatty acids, was 1.0088 gr palmitic acid methyl ester (9.04%), 1.2700 gr linoleic acid methyl ester (11.38 %), 7.3556 gr oleic acid methyl ester (65.91%) and 1.4887 gr stearic acid methyl ester (13.34%). The antibacterial activity test showed that all concentrations of n-hexane extracts of 50 mg/ml, 150 mg/ml, and 250 mg/ml tested were able to inhibit the growth of E. coli and S. aureus bacteria in n-hexane extract, wherein the inhibited zone by the n-hexane extract is included in the weak category (≤14 mm) except at the concentration of 250 mg/ml in the S. aureus test bacteria belonging to the medium type (15-19 mm).

Eco-friendly approach for tannery effluent treatment and CO2 sequestration using unicellular green oleaginous microalga Tetradesmus obliquus TS03.

The present study explored the process of bioremediation, sequestration of carbon dioxide, and biofuel production using multifarious potent freshwater microalgae Tetradesmus obliquus TS03. The heavy metals were reduced, viz., 8.34mg of cadmium (95.13%), 4.56mg of chromium (97.28%), 1.34mg of copper (98.67%), 1.24mg of cobalt (98.19%), 1.93mg of lead (96.72%), 2.31mg of nickel (97.14%), and 2.23 mgL-1 of zinc (96.59%) using photobioreactor microalgal treatment method. The heavy metal biosorption capacity rate (qmax) was 98.90% determined by the Langmuir and Freundlich isotherm kinetics model at 10days of effluent treatment using Tetradesmus obliquus TS03. The microalgae T. obliquus TS03 utilized 98.34% of carbon dioxide (CO2) enhanced by acetyl CoA carboxylase and RuBisCO enzymes. The biodiesel was extracted from microalga and identified 32 fatty acid methyl ester major compounds viz., tetradecanoate methyl ester, hexadecanoic acid methyl ester, tridecanoic acid methyl ester, heptadecatrienoic acid methyl ester, octadecanoic acid methyl ester, eicosanoic acid methyl ester, pentadecanoic acid methyl ester, and cis-methylicosanoate using gas mass chromatography (GCMS). The biodiesel functional groups were identified, viz., amides, phenols, alcohols, alkynes, carboxylic acids, carbonyls, and ketones groups using Fourier transformation infrared (FTIR). The bioethanol was identified using high-performance liquid chromatography (HPLC) and determined the peak presented at RT of 4.35min (75,693.1046µVs-1).

Identification and Pharmacological Evaluation of Syzygium cumini Derived Fixed Oils

Syzygium cumini L is an evergreen medicinal plant belonging to the family Myrtaceae, and is one of the important species of the genus Syzygium. S. cumini is traditionally used to treat various infections such as sore throat, bronchitis, dysentery, and other painful conditions. The aim of the current study was to evaluate fixed oil extracted from S. cumini for various in vitro and in vivo biological activities and identification of its fatty acids constituents. GC-MS analysis of the fixed oil revealed that the major constituents are palmitic acid methyl ester (56.45%) and stearic acid methyl ester (29.54%). Fixed oil isolated from S. cumini exhibited significant effect against Staphylococcus aureus, Shigella flexenari, and Bacillus subtilis with zone of inhibition of 28.09, 27.34, and 22.76 mm, respectively. In addition, the oil exhibited antifungal effect against Aspergillus flavus, Candida glabrata, Microsporum canis, and Fusarium solani with zone of inhibition of 80.77, 75.08, 70.98, and 65.56 mm, respectively. The oil also exerted analgesic potential at the dose of 10, 20, 40, and 60 mg/Kg with 35.44, 50.45, 65.98, and 80.34 % activity in acetic acid-induced writhing model. A mild muscle relaxant effect was noted in animal models. Taken all together, the fixed oil from S. cumini exhibits significant antimicrobial, antifungal and analgesic effects, which justifies the use of this plant in folk medicine.

Synthesis of branched surfactant via ethoxylation of oleic acid derivative and its surface properties

A class of bio-based nonionic surfactants with double hydrophilic head groups (DMOE n ) was obtained from the waste cooking oil. • A new strategy for the preparation of branched surfactants from renewable oleic acid in waste cooking oil was proposed, and a class of bio-based nonionic surfactants with double hydrophilic head groups (DMOE n ) was obtained. • The ethoxylation reaction process of DMO and its reaction kinetic were both systematically optimized and studied. • The surface activities, aggregation and adsorption behaviors of DMOE n were investigated, and it was discovered that DMOE n had the characteristics of typical branched surfactant with good wetting performance, low foaming and strong defoaming ability. A new series of bio-based branched nonionic surfactants (ethoxylated dihydroxy stearic acid methyl ester, DMOE n ) was synthesized and characterized. DMOE n was based on a hydroxyoctadecanoic acid methyl ester, which was obtained from renewable oleic acid in waste cooking oil. These new polyoxyethylene surfactants contained double hydrophilic and hydrophobic chains, which shows the surface properties of the branched surfactant. The synthesis rules and reaction kinetics were studied in detail. The physicochemical properties and surface properties of the DMOE n with different degrees of ethoxylation at various concentrations were investigated. Furthermore, the surface tension results indicate that DMOE n reduced the surface tension reduction and increased the diffusion rate in an aqueous solution. The dynamic contact angle, wettability, foaming properties, and emulsifying capacity tests showed that DMOE n exhibited good wetting performance, low foaming, fast defoaming, and excellent emulsifying ability, which shows that the surfactant has potential application in industrial cleaning.

Chemical composition and in vitro and in vivo biological assortment of fixed oil extracted from Ficus benghalensis L.

Abstract Ficus benghalensis (Moraceae) is widely found in Asian Countries and has been traditionally prescribed owing to its analgesic, anti-inflammatory, and muscle relaxation properties. Purposely, in this study, phytochemical composition and isolation of fixed oil from F. benghalensis were comprehended for the first time. The fatty acids were isolated from hexane (HO) and chloroform (CO) fractions and were characterized by gas chromatography-mass spectrometry (GC-MS) analysis. The fatty acid ester was identified by comparing the mass spectra with the equipment library. The major fatty acids identified from HO extract were oleic acid methyl ester (42.67), palmitic acid methyl ester (28.79), linoleic acid methyl ester (11.36), docosanoic acid methyl ester (8.83), and stearic acid methyl ester (3.21). Similarly, the major constituents of CO fraction were palmitic acid methyl ester (65.94), oleic acid methyl ester (10.18), stearic acid methyl ester (9.15), elaidic acid methyl ester (5.32), and linoleic acid methyl ester (3.94). Both of the isolated fixed oils were screened for antibacterial, antioxidant, analgesic, and muscle relaxant effects. Regarding the antibacterial effect, the maximum zone of inhibition against Bacillus subtilis was 26.32 and 25.09 mm by HO and CO fractions, respectively. Both HO and CO demonstrated significant antioxidant effects, i.e., 70.23 and 72.09 µg/mL at a higher dose (100 µg/mL). Similarly, both experimented fractions demonstrated significant analgesic effects while the muscle relaxant effect and sedative were non-significant. Results of the present study conclude that fixed oils are the significant antibacterial and analgesic.

Effect of microwave roasting on the chemical constituents and antioxidant potentials of coffee beans

The present work evaluated the effect of microwave roasting on total polyphenol content (TPC), total flavonoid content (TFC), 2,2-diphenyl-1-picrylhyrazyl (DPPH) radical scavenging activity, some selected compounds, and the mineral content of coffee beans. Coffee bean powder was roasted at three microwave power levels (450, 720, and 900 W) and treatment durations (4, 6, and 8 min). The TPC, TFC, and DPPH radical scavenging activity were increased by increasing the microwave power and roasting duration, but detrimental effects were observed at higher power levels and longer treatment durations. The highest TPC, TFC, and DPPH radical scavenging activity were detected for the sample treated at 720 W for 6 min. The mineral content was only increased in the sample treated at 450 W for 4 min; all other treatments decreased the mineral content. Microwave power levels and treatment durations showed a significant increase in the browning intensity of the coffee bean extract. The selected coffee bean compounds as analysed by GC-MS were affected in different ways by microwave treatment. The relative percentage of caffeine was increased from 40.06 to 49.12% when treated at 450 W for 4 min, while n-hexadecanoic acid content was decreased from 33.86% in untreated coffee beans to 16.31% when treated at 450 W for 4 min. There was also the formation of new compounds such as octadecanoic acid-methyl ester, vitamin E, and stigmasterol upon microwave roasting of coffee beans. Based on the above results, microwave heating can be used as a roasting method for coffee beans.

Branched polyoxyethylene surfactants with different hydrophilic head groups from fatty acid derivatives

New branched polyoxyethylene surfactants with different hydrophilic head groups have been synthesized from fatty acid derivatives as renewable resources. Through a systematic study of the surfactant properties of the obtained substances, ethoxylated monohydroxy stearic acid methyl ester (12-HMEEn) with a single hydrophilic head group, similar to commercial Guerbet alcohol polyoxyethylene ether, has been identified as the most promising candidate. It has excellent surfactant properties including good wettability, low foaming, and strong defoaming ability, indicating that it could be useful in industrial cleaning.