Steady-state Photoluminescence Research Articles

Light Emissive Nanocomposites Containing a Blue Fluorescent Dicationic Tetraphenylethene and a Red Phosphorescent [Mo6I8(OCOC2F5)6]2− Octahedral Cluster for Optical Writing

AbstractAn emissive organic–inorganic hybrid material is obtained by a cationic metathesis between a blue fluorescent tetraphenylethylene‐based salt: [TPEIm2]I2, and a red‐NIR phosphorescent octahedral molybdenum cluster compound: Cs2[Mo6I8(OCOC2F5)6]. As demonstrated by Single Crystal X‐Ray Diffraction, the hybrid [TPEIm2][Mo6I8(OCOC2F5)6] crystallizes as a 2:2 dimer and emits in the red‐NIR area. Its emission properties are studied in the solid state and once embedded in poly(methylmethacrylate) by steady state and time dependent photoluminescence spectroscopy. They are further compared to the case in which the two starting salts are directly integrated in the polymer matrix. Obtained nanocomposites show evanescent UV‐2A optical writing and reading behavior, with color contrasts depending on how emitters have been introduced.

Promotion of Fast and Efficient Singlet Fission Process of PDI Dimers by Selenium Substitution.

Singlet fission (SF) is a triplet generation mechanism capable of turning a singlet exciton into two triplet excitons. It has the potential to enhance the power conversion efficiency of single-junction solar cells. Perylene diimides (PDIs) are a class of dye molecules with photovoltaic properties and are beginning to receive more and more attention due to their potential for SF. Here, we report a selenium-substituted PDI dimer, Se-PDI-II, and we studied its SF mechanism by using steady-state, transient absorption, and time-resolved photoluminescence spectroscopy. Compared with the unsubstituted dimer PDI-II, we found that the introduction of selenium atoms can suppress excimer emission during the SF process, showing much higher SF efficiency and triplet yield.

Fully quantum-kinetic theory of the steady-state cooperative photoluminescence from two near-identical emitters

We have developed a theory of cooperative photoluminescence from two closely spaced particles using the density matrix method. The theory provides modelling of the photoluminescence excitation and emission spectra by nonidentical quantum emitters entangled by the dipole–dipole interaction in presence of a cw laser beam. It is shown that the excitation spectra agree with all currently known experiments with pairs of coherently coupled organic molecules in thin solid layers. The modelling was performed with the use of the Bogolyubov-Born-Green-Kirkwood-Yvon (BBGKY) hierarchies for reduced density matrices and correlation operators of the quantum emitters and photonic subsystems. This method gives a straightforward way to describe the dipole–dipole coupling and entanglement of the emitters. We have also calculated the emission spectra to demonstrate the expected spectral patterns.

Progressive quenching of luminescence from quantum dot thin films in proximity with ZnMgO in unencapsulated stacks

ZnMgO nanoparticles (NPs) are being increasingly used as the electron transport layer (ETL) in state-of-the-art quantum-dot light-emitting devices (QLEDs) instead of ZnO. However, the impact of ZnMgO on the luminescence properties of quantum dots (QDs) is much less understood. Here, we compare ZnMgO and ZnO NPs for their quenching effect on Cd-based QDs photoluminescence (PL), immediately and over time. Time-resolved photoluminescence (TRPL) and steady-state PL results show that ZnMgO NPs decreases the QDs’ luminescence more than ZnO NPs and that the behavior continues progressively over time. The surface topography of the samples containing different ETLs is studied using atomic force microscopy (AFM) and optical PL images. Additionally, time of flight secondary ion mass spectroscopy (TOF-SIMS) measurements are conducted to investigate the potential diffusion of some species from ETL into the QDs layer. The results confirm that morphological changes and out-diffusion of some species from the ZnMgO layer can likely play a role in the QDs PL quenching. This study sheds light on the limitations of ZnMgO for the long-term stability of QLEDs, specifically for blue QLEDs where using ZnMgO is essential for efficient electron injection.

Cl alloying improves thermal stability and increases luminescence in iodine-rich inorganic perovskites.

The inorganic perovskite CsPbI3 shows promising photophysical properties for a range of potential optoelectronic applications but is metastable at room temperature. To address this, Br can be alloyed into the X-site to create compositions such as CsPbI2Br that are stable at room temperature but have bandgaps >1.9 eV - severely limiting solar applications. Herein, in an effort to achieve phase stable films with bandgaps <1.85 eV, we investigate alloying chlorine into iodine-rich triple-halide CsPb(I0.8Br0.2-x Cl x )3 with 0 < x < 0.1. We show that partial substitution of iodine with bromine and chlorine provides a path to maintain broadband terrestrial absorption while improving upon the perovskite phase stability due to chlorine's smaller size and larger ionization potential than bromine. At moderate Cl loading up to ≈5%, X-ray diffraction reveals an increasingly smaller orthorhombic unit cell, suggesting chlorine incorporation into the lattice. Most notably, this Cl incorporation is accompanied by a significant enhancement over Cl-free controls in the duration of black-phase stability of up to 7× at elevated temperatures. Additionally, we observe up to 5× increased steady state photoluminescence intensity (PL), along with a small blue-shift. In contrast, at high loading (≈10%), Cl accumulates in a second phase that is visible at grain boundaries via synchrotron fluorescence microscopy and negatively impacts the perovskite phase stability. Thus, replacing small fractions of bromine for chlorine in the iodine-rich inorganic perovskite lattice results in distinct improvement thermal stability and optoelectronic quality while minimally impacting the bandgap.

Red-Emitting CsPbI3/ZnSe Colloidal Nanoheterostructures with Enhanced Optical Properties and Stability.

Producing heterostructures of cesium lead halide perovskites and metal-chalcogenides in the form of colloidal nanocrystals can improve their optical features and stability, and also govern the recombination of charge carriers. Herein, the synthesis of red-emitting CsPbI3/ZnSe nanoheterostructures is reported via an insitu hot injection method, which provides the crystallization conditions for both components, subsequently leading to heteroepitaxial growth. Steady-state absorption and photoluminescence studies alongside X-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy analysis evidence on a type-I band alignment for CsPbI3/ZnSe nanoheterostructures, which exhibit photoluminescence quantum yield of 96% due to the effective passivation of surface defects, and an enhancement in carrier lifetime. Furthermore, the heterostructure growth of ZnSe domains leads to significant improvement in the stability of the CsPbI3 nanocrystals under ambient conditions and against thermal and UV irradiation stress.

Antiprotozoal Pt(II) Complexes as Luminophores Bearing Monodentate P/As/Sb-Based Donors: An X-ray Diffractometric, Photoluminescence, and 121Sb-Mössbauer Spectroscopic Study with TD-DFT-Guided Interpretation and Predictive Extrapolation toward Bi.

In this study, it is demonstrated that the radiative rate constant of phosphorescent metal complexes can be substantially enhanced using monodentate ancillary ligands containing heavy donor atoms. Thus, the chlorido coligand from a Pt(II) complex bearing a monoanionic tridentate C^N*N luminophore ([PtLCl]) was replaced by triphenylphosphane (PPh3) and its heavier pnictogen congeners (i.e., PnPh3 to yield [PtL(PnPh3)]). Due to the high tridentate-ligand-centered character of the excited states, the P-related radiative rate is rather low while showing a significant boost upon replacement of the P donor by heavier As- and Sb-based units. The syntheses of the three complexes containing PPh3, AsPh3, and SbPh3 were completed by unambiguous characterization of the clean products using exact mass spectrometry, X-ray diffractometry, bidimensional NMR, and 121Sb-Mössbauer spectroscopy (for [PtL(SbPh3)]) as well as steady state and time-resolved photoluminescence spectroscopies. Hence, it was shown that the hybridization defects of the Vth main-group atoms can be overcome by complexation with the Pt center. Notably, the enhancement of the radiative rate constants mediated by heavier coligands was achieved without significantly influencing the character of the excited states. A rationalization of the results was achieved by TD-DFT. Even though the Bi-based homologue was not accessible due to phenylation side reactions, the experimental data allowed a reasonable extrapolation of the structural features whereas the hybridization defects and the excited state properties related to the Bi-species and its phosphorescence rate can be predicted by theory. The three complexes showed an interesting antiprotozoal activity, which was unexpectedly notorious for the P-containing complex. This work could pave the road toward new efficient materials for optoelectronics and novel antiparasitic drugs.

Photoexcited Carrier Dynamics in Iodine-Doped CH3NH3PbBr3 Single Crystals.

Iodine-doped bromide perovskite single crystals (IBPSCs) have important applications in optoelectronic fields, such as in solar cells. Currently, much research has aimed to study the phase separation phenomenon and device performance improvements in IBPSCs. However, important intrinsic photoexcited carrier dynamics are often overlooked in IBPSCs. Here, we explored the photoexcited carrier dynamics in typical iodine-doped MAPbBr3 single crystals using the excitation intensity-dependent steady-state photoluminescence (PL) and time-resolved photoluminescence (TRPL) technique. We found that the trap state density changes with an increase in the amount of doped iodine. Further, we noticed that there is an influence of carrier diffusion on the photoexcited carrier dynamics, and then, we evaluated the carrier diffusion coefficients and recombination constants via numerical simulations of the PL kinetics. Consequently, we found that the electron shallow trap-related carrier behaviors substantially impacted the PL kinetics. Our results greatly facilitate a deeper understanding of the fundamental characteristics of mixed halide perovskite material.

Luminescence Dynamics of BaAl2O4:Eu2+ Phosphor.

We studied steady-state and time-resolved photoluminescence of Eu doped BaAl2O4 phosphor. The undoped BaAl2O4 sample shows a dominant blue emission band at ~ 428nm and two secondary maxima at ~ 405 and 456nm due to F-centre and aggregate defects such as F2 -centre. The samples after doping of Eu at 1-5% show additional emission bands at ~ 485 and 518 nm due to Eu2+ centre and a red emission band at ~ 657nm is attributed to Eu3+ centre. The sample doped with 2% of Eu shows anomalous emission having the dominant peak at ~ 494nm. The average luminescence lifetime of the emission band at ~ 428nm in the undoped sample was estimated to be (3.29 ± 0.91) ns. The average luminescence lifetime of this emission band after doping of Eu was found to increase by 102 orders of magnitude. The intensity of the 428nm blue emission band was found to quench after doping of Eu beyond 3%. The concentration quenching effect was attributed to dipole-quadrupole interaction. Further, a non-radiative fluorescence energy transfer mechanism from an extrinsic Eu2+ centre to an intrinsic F-centre is proposed to describe the luminescence dynamics of the samples.

Temperature-dependent excitonic emission characteristics of highly crystallized carbon nitride nanosheets

Highly-crystallized carbon nitride (HCCN) nanosheets exhibit significant potential for advancements in the field of photoelectric conversion. However, to fully exploit their potential, a thorough understanding of the fundamental excitonic photophysical processes is crucial. Here, the temperature-dependent excitonic photoluminescence (PL) of HCCN nanosheets and amorphous polymeric carbon nitride (PCN) is investigated using steady-state and time-resolved PL spectroscopy. The exciton binding energy of HCCN is determined to be 109.26 meV, lower than that of PCN (207.39 meV), which is attributed to the ordered stacking structure of HCCN with a weaker Coulomb interaction between electrons and holes. As the temperature increases, a noticeable reduction in PL lifetime is observed on both the HCCN and PCN, which is ascribed to the thermal activation of carrier trapping by the enhanced electron–phonon coupling effect. The thermal activation energy of HCCN is determined to be 102.9 meV, close to the value of PCN, due to their same band structures. Through wavelength-dependent PL dynamics analysis, we have identified the PL emission of HCCN as deriving from the transitions: σ*–LP, π*–π, and π*–LP, where the π*–LP transition dominants the emission because of the high excited state density of the LP state. These results demonstrate the impact of high-crystallinity on the excitonic emission of HCCN materials, thereby expanding their potential applications in the field of photoelectric conversion.

Photoluminescence-based biosensor for the detection of antibodies against SARS-CoV-2 virus proteins by ZnO tetrapod structure integrated within microfluidic system

This paper reports on development of an optical biosensor for the detection of antibodies against SARS-CoV-2 virus proteins in blood serum. ZnO nanotetrapods with high surface area and stable room temperature photoluminescence (PL) were selected as transducers. Structure and optical properties of the ZnO tetrapods have been studied by XRD, SEM and Raman spectroscopy. Crystallinity, dimensions and emission peaks of the ZnO tetrapods were determined. The ZnO tetrapods were fixed on glass chip. Silanization of ZnO tetrapods surface resulted in forming of functional surface groups suitable for the immobilization of bioselective layer. Two types of recombinant proteins (rS and rN) have been used to form bioselective layer on the surface of the ZnO tetrapods. Flow through microfluidic system, integrated with optical system, has been used for the determination of antibodies against SARS-CoV-2 virus proteins present in blood samples. The SARS-CoV-2 probes, prepared in PBS solution, have been injected into the measurement chamber with a constant pumping speed. Steady-state photoluminescence spectra and photoluminescence kinetics have been studied before and after injection of the probes. The biosensor signal has been tested to anti-SARS-CoV-2 antibodies in the range of 0.001 nM–1 nM. Control measurements have been performed with blood serum of healthy person. ZnO-SARS-CoV-2-rS and ZnO-SARS-CoV-2-rN biosensors showed high stability and sensitivity to anti-SARS-CoV-2 antibodies in the range of 0.025–0.5 nM (LOD 0.01 nM) and 0.3–1 nM (LOD 0.3 nM), respectively. Gibbs free energy of interaction between ZnO/SARS-CoV-2-rS and ZnO/SARS-CoV-2-rN bioselective layers with anti-SARS-CoV-2 antibodies showed −35.5 and −21.4 kJ/mol, respectively. Average detection time of biosensor integrated within microfluidic system was 15–20 min. The detection time and pumping speed (50 μL/min) were optimized to make detection faster. The developed system and ZnO-SARS-CoV-2-rS nanostructures have good potential for detection of anti-SARS-CoV-2 antibodies from patient's probes.

Regioisomerism vs Conformation: Impact of Molecular Design on the Emission Pathway in Organic Light-Emitting Device Emitters.

Despite the design and proposal of several new structural motifs as thermally activated delayed fluorescent (TADF) emitters for organic light-emitting device (OLED) applications, the nature of their interaction with the host matrix in the emissive layer of the device and their influence on observed photophysical outputs remain unclear. To address this issue, we present, for the first time, the use of up to four regioisomers bearing a donor-acceptor-donor electronic structure based on the desymmetrized naphthalene benzimidazole scaffold, equipped with various electron-donating units and possessing distinguished conformational lability. Quantum chemical calculations allow us to identify the most favorable conformations adopted by the electron-rich groups across the entire pool of regioisomers. These conformations were then compared with conformational changes caused by the interaction of the emitter with the Zeonex and 4,4'-bis(N-carbazolyl)-1,1'-biphenyl (CBP) matrices, and the correlation with observed photophysics was monitored by UV-vis absorption and steady-state photoluminescence spectra, combined with time-resolved spectroscopic techniques. Importantly, a CBP matrix was found to have a significant impact on the conformational change of regioisomers, leading to unique TADF emission mechanisms that encompass dual emission and inversion of the singlet-triplet excited-state energies and result in the enhancement of TADF efficiency. As a proof of concept, regioisomers with optimal donor positions were utilized to fabricate an OLED, revealing, with the best-performing dye, an external quantum emission of 11.6%, accompanied by remarkable luminance (28,000 cd/m2). These observations lay the groundwork for a better understanding of the role of the host matrix. In the long term, this new knowledge can lead to predicting the influence of the host matrix and adopting the structure of the emitter in a way that allows the development of highly efficient and efficient OLEDs.

Doping Ferrocene-Based Conjugated Microporous Polymers with 7,7,8,8-Tetracyanoquinodimethane for Efficient Photocatalytic CO2 Reduction.

The design and synthesis of organic photocatalysts remain a great challenge due to their strict structural constraints. However, this could be mitigated by achieving structural flexibility by constructing permanent porosity into the materials. Conjugated microporous polymers (CMPs) are an emerging class of porous materials with an amorphous, three-dimensional network structure, which makes it possible to integrate the elaborate functional groups to enhance photocatalytic performance. Here, we report the synthesis of a novel CMP, named TAPFc-TFPPy-CMP, constructed by 1,1'3,3'-tetra(4-aminophenyl)ferrocene (TAPFc) and 1,3,6,8-tetrakis(4-formylphenyl)pyrene (TFPPy) monomers. The integration of the p-type dopant 7,7,8,8-tetracyanoquinodimethane (TCNQ) into the TAPFc-TFPPy-CMP improved the light adsorption performance, leading to a decrease in the optical bandgap from 2.00 to 1.43 eV. The doped CMP (TCNQ@TAPFc-TFPPy-CMP) exhibited promising catalytic activity in photocatalytic CO2 reduction under visible light, yielding 546.8 μmol g-1 h-1 of CO with a selectivity of 96% and 5.2 μmol g-1 h-1 of CH4. This represented an 80% increase in the CO yield compared to the maternal TAPFc-TFPPy-CMP. The steady-state photoluminescence (PL) and fluorescence lifetime (FL) measurements reveal faster carrier separation and transport after the doping. This study provides guidance for the development of organic photocatalysts for the utilization of renewable energy.

Design of CdS/Covalent Organic Framework as an efficient heterojunction photocatalyst for enhanced photocatalytic H2 evolution

In this study, we design a CdS/Covalent Organic Framework (COF) heterojunction to enhance the photocatalytic H2 evolution. The results demonstrate that the 30% CdS/TTCOF heterojunction exhibits the highest H2 production activity of 21.8 mmol g−1 under visible light, surpassing that of pure CdS and TTCOF by 8.1 and 18.2 times, respectively. Additionally, time-resolved fluorescence decay and steady-state photoluminescence spectra indicate that the enhanced photocatalytic performance of the CdS/TTCOF heterojunction can be ascribed to fast charge carrier transfer between CdS and TTCOF.

The effects of nontoxic bio-based substances (egg white) on the performance and passivation of ZnO nanorods arrays-based light emitting devices

An innovative approach is proposed to passivate the existing defects from metal oxide semiconductors by functionalizing nontoxic bio-based substances. As a demonstration, we synthesized zinc oxide nanorods (ZnO NRs) using a hydrothermal method and incorporated chicken egg white (albumen) as a passivator to the defects. X-ray diffraction analysis of ZnO NRs shows enhanced quality and crystallinity features after incorporating albumen. XPS measurements were performed not only to introduce the chemical bonding between the albumen and the bare ZnO NRs but also specifically provide evidence of successful capping and defect passivation to the surface layer of ZnO NRs. It was observed that when the albumen was annealed, it formed sulfhydryl groups and disulfide bonds (which created disulfide bridges) from the chemical reaction in irreversible thermal denaturation. Steady-state photoluminescence of ZnO NRs showed two emission bands, i.e. near band-edge emission (NBE) and deep-level emission (DL). The NBE is significantly improved as compared to DL emission after capping and annealing the albumen, while the quenching of DL emission confirmed the reduced defects arising from the surface of ZnO NRs. The advantages and enhanced characteristics of the albumen-capped ZnO NRs led to fabricating a stable and highly efficient light-emitting device. This work opens the great potential of utilizing nontoxic and low-cost biomaterials in passivating the defects of metal oxide nanomaterials for the development of bio-inspired and stable optoelectronic devices.

High–Quality and Stable Quasi‐2D Perovskite Film Prepared by Introducing Alkali Metal Ion Additive

AbstractDue to the excellent stability, researchers have shown great interest in quasi two–dimensional (2D) perovskite in recent years. However, the poor film quality and low photoelectric conversion efficiency (PCE) of 2D perovskite solar cells are still a major issue that restricts them from catching up with three–dimensional (3D) perovskite. Herein, we introduce sodium iodide as an additive to improve the surface coverage of 2D perovskite ((BA)2(MA)3Pb4I13) films and reduce the number of grain boundaries. Steady–state photoluminescence (PL) and ultraviolet photoelectron spectroscopy (UPS) indicate that non–radiative defects are suppressed and the band alignment is regulated. After modified by NaI, the film surface coverage enhances and the number of holes decreases. As a result, the PCE of device with NaI increases from 13.63 % to 16.40 % at optimal concentration, and the hysteresis effect is also suppressed. Besides, the humidity and thermal stability of perovskite are enhanced. The device with NaI modification can keep 80 % of initial efficiency, compared to 30 % for reference device after stored 30 days under ambient air condition. This work provides a simple method to improve the quality of quasi 2D perovskite films.

A triazine-based covalent organic framework decorated with cadmium sulfide for efficient photocatalytic hydrogen evolution from water

Construction of inorganic/organic heterostructures has been proven to be a very promising strategy to design highly efficient photocatalysts for solar driven hydrogen evolution from water. Herein, we report the preparation of a direct Z-scheme heterojunction photocatalyst by in situ growth of cadmium sulfide on a triazine-based covalent organic framework (COF). The triazine based-COF was synthesized by condensation reaction of precursors 1,3,5-tris-(4-formyl-phenyl) triazine (TFPT) and 2,5-bis-(3-hydroxypropoxy) terephthalohydrazide (DHTH), termed as TFPT-DHTH-COF. Widely distributed nitrogen atoms throughout TFPT-DHTH-COF skeletons serve as anchoring sites for strong interfacial interactions with CdS. The CdS/TFPT-DHTH-COF composite showed a hydrogen evolution rate of 15.75 mmol h−1 g−1, which is about 75 times higher than that of TFPT-DHTH-COF (0.21 mmol h−1 g−1) and 3.4 times higher than that of CdS (4.57 mmol h−1 g−1). With the properly staggered band alignment and strong interfacial interaction between TFPT-DHTH-COF and CdS, a Z-scheme charge transfer pathway is achieved. The mechanism has been systematically analyzed by steady state and time-resolved photoluminescence measurements as well as in situ irradiated X-ray photoelectron spectroscopy.

Auger-limited minority carrier lifetime in GeSn/SiGeSn quantum well

A minority carrier lifetime of 2.7 ns is measured at 77 K for a GeSn/SiGeSn single quantum well using time-resolved photoluminescence, and subsequent analyses indicate that the lifetime is Auger-limited. The 77 K lifetime is evaluated as a function of stepwise dose of 63 MeV proton irradiation up to a fluence of 1.5 × 1012 p+/cm2 with no discernable reduction in the observed lifetime, which implies that the lifetime damage factor slope to 63 MeV proton irradiation is not greater than 2 × 10−5 cm2/s. Steady-state photoluminescence is used to evaluate the total luminescence output as a function of excitation, yielding a 2/3 power law slope consistent with Auger-limited recombination. The observed Auger-limited behavior is consistent with reports of high p-type background carrier concentration in these alloys. The temperature dependence of the steady-state photoluminescence spectra also provides the Einstein single oscillator model parameters for the ground state transition energy and Urbach energy of the GeSn quantum well.

Photoluminescence properties of double perovskite Ca2LuTaO6:Bi3+/Sm3+ white light emitting phosphors

The high-temperature solid state reaction approach was used to successfully synthesize novel tunable-color emitting Ca2LuTaO6 phosphors with double perovskite structure that were un-doped, single-doped, and co-doped with Bi3+/Sm3+ ions. The crystal structure, microstructure, steady-state photoluminescence, time-resolved luminescence measurements, and thermal quenching features of the material were studied. The density functional theory method was used to compute the band gap of the Ca2LuTaO6, and Ca2LuTaO6: Bi3+, Sm3+ phosphors. The blue emission at 407 nm (with 313 nm excitation) is due to the host's luminescence, while the cyan emission at 480 nm (under 365 nm excitation) is related to the distinctive 3Pn − 1S0 transitions (n = 0, 1, 2) of Bi3+. Similarly, efficient red emission is observed in the case of Sm3+ single-doped Ca2LuTaO6 phosphors. In addition, the Ca2LuTaO6: 0.04Bi3+, 0.05 S m3+ phosphors exhibit energy transfer phenomena and have excellent thermal stability, the fluorescence intensity at 150 °C maintains 73% of that at 25 °C and has a small chromaticity shift. The intense blue emission at 407 nm was effectively converted to cyan, red, and white light through doping with Bi3+ and Sm3+, and the resulting energy transfer. The results obtained confirm that Ca2LuTaO6: Bi3+, Sm3+ phosphors as a single matrix have great potential for high-power WLED applications.

Ag-CsPbI3 nanocomposite structure in glasses boosts photoluminescence for efficient light emitting diodes

Nanocomposite structures based on perovskite nanocrystals (NCs) and metal nanostructures within transparent monolithic media hold promise for a wide range of applications in optoelectronics. However, the microstructure of such nanocomposites and the reason for enhanced emissions remain incompletely understood. In this work, we present the successful creation of Ag-CsPbI3 nanocomposite within a highly transparent borosilicate glass (Ag-CsPbI3 NCs@glass). We reveal that Ag and CsPbI3 NCs form after thermal treatment of the glass, either in the form of Ag-CsPbI3 heterostructures or of separate Ag and CsPbI3 NCs. Based on combined characterization of Mott-Schottky and steady-state photoluminescence (PL) of the products, we attribute the enhanced PL in the nanocomposite of Ag-CsPbI3 to the regulation of CsPbI3 lattice by Ag ions and/or the plasmonic effect of Ag NCs. Temperature-dependent time-resolved PL decay measurements suggest that Ag NCs could play an important role in the relaxation process of excited carriers by increasing the radiative recombination. Moreover, the Ag-CsPbI3 nanocomposite structure within the glass matrix curtails PL quenching caused by water molecules and high temperature. Using the Ag-CsPbI3 nanocomposite, we achieve high-performance white light-emitting diodes with a color rendering index of 83.9 and luminous efficiency of 58.07 lmW−1. This work elucidates the underlying mechanism on the enhanced PL in nanocomposites containing perovskite NCs and metal nanostructures, and aids in the rational design of glass-based perovskite nanocomposites for a diversity of optoelectronic applications.