Static Shadows Research Articles

MPPT control technology based on the GWO-VINC algorithm

It is a challenging task to accurately track the global maximum power point (GMPP) in a changing environment in widely used photovoltaic (PV) systems. So far, a variety of maximum power point (MPP) tracking algorithms have been used in solar PV power systems. The classical algorithm is simple and fast to track the speed effectively in a constant environment, but it can get stuck at an extreme point in a variable environment. In this paper, the variable-step incremental conductance (VINC) method is combined with the gray wolf optimization (GWO) algorithm. Firstly, GWO conducts a global search. When the search reaches the area near GMPP, the next step of the search process is carried out based on the iteration number conditions of GWO. Enter the search process of VINC and determine whether the current search process is on the left or right side of the vertex based on the current search value. And adjust the duty cycle during the VINC search process using different variable step size methods based on the left and right sides, and finally accurately locate the GMPP value. To verify the robustness of the proposed algorithm, simulation, and experimental comparisons were conducted between the proposed method in the article and GWO and VINC. The tracking efficiency of static shadows, simulated dynamic shadows, and experimental static and dynamic shadows is 99.80%, 98.82%, 99.43%, and 98.51%, respectively. The tracking time of simulation and experiment is 46.49% and 89.34% faster than GWO and VINC technologies, respectively. The results show that compared with the GWO and VINC methods, the proposed method has improved tracking speed and efficiency. Moreover, compared with the method that combines the two intelligent algorithms, this method has fewer algorithm parameters, a simple calculation process, lower complexity, lower hardware requirements, and better actual implementation performance.

Planetary-like spirals caused by moving shadows in transition discs

Abstract Shadows and spirals seem to be common features of transition discs. Among the spiral-triggering mechanisms proposed, only one establishes a causal link between shadows and spirals so far. In fact, provided the presence of shadows in the disc, the combined effect of temperature gradient and differential disc rotation creates strong azimuthal pressure gradients. After several thousand years, grand-design spirals develop in the gas phase. Previous works have only considered static shadows caused by an inclined inner disc. However, in some cases, the inner regions of circumbinary discs can break and precess. Thus, it is more realistic to consider moving shadow patterns in the disc. In this configuration, the intersection between the inner and the outer discs defines the line of nodes at which the shadows are cast. Here, we consider moving shadows and study the resulting circumbinary disc structure. We find that only static and prograde shadows trigger spirals, in contrast to retrograde ones. Interestingly, if a region of the disc corotates with the shadow, a planet-like signature develops at the co-rotation position. The resulting spirals resemble those caused by a planet embedded in the disc, with similar pitch angles.

The perception of 3-D shape from shadows cast onto curved surfaces

In a natural environment, cast shadows abound. Objects cast shadows both upon themselves and upon background surfaces. Previous research on the perception of 3-D shape from cast shadows has only examined the informativeness of shadows cast upon flat background surfaces. In outdoor environments, however, background surfaces often possess significant curvature (large rocks, trees, hills, etc.), and this background curvature distorts the shape of cast shadows. The purpose of this study was to determine the extent to which observers can discount the distorting effects of curved background surfaces. In our experiments, observers viewed deforming or static shadows of naturally shaped objects, which were cast upon flat and curved background surfaces. The results showed that the discrimination of 3-D object shape from cast shadows was generally invariant over the distortions produced by hemispherical background surfaces. The observers often had difficulty, however, in identifying the shadows cast onto saddle-shaped background surfaces. The variations in curvature which occur in different directions on saddle-shaped background surfaces cause shadow distortions that lead to difficulties in object recognition and discrimination.

The perception of 3-D shape from shadows cast onto curved surfaces

In a natural environment, cast shadows abound. Objects cast shadows both upon themselves and upon background surfaces. Previous research on the perception of 3-D shape from cast shadows has only examined the informativeness of shadows cast upon flat background surfaces. In outdoor environments, however, background surfaces often possess significant curvature (large rocks, trees, hills, etc.), and this background curvature distorts the shape of cast shadows. The purpose of this study was to determine the extent to which observers can “discount” the distorting effects of curved background surfaces. In our experiments, observers viewed deforming or static shadows of naturally shaped objects, which were cast upon flat and curved background surfaces. The results showed that the discrimination of 3-D object shape from cast shadows was generally invariant over the distortions produced by hemispherical background surfaces. The observers often had difficulty, however, in identifying the shadows cast onto saddle-shaped background surfaces. The variations in curvature which occur in different directions on saddle-shaped background surfaces cause shadow distortions that lead to difficulties in object recognition and discrimination.

Video-Based Automatic Incident Detection for Smart Roads: The Outdoor Environmental Challenges Regarding False Alarms

Video-based automatic incident detection (AID) systems are increasingly being used in intelligent transportation systems (ITS). Video-based AID is a promising method of incident detection. However, the accuracy of video-based AID is heavily affected by environmental factors such as shadows, snow, rain, and glare. This paper presents a review of the different work done in the literature to detect outdoor environmental factors, namely, static shadows, snow, rain, and glare. Once these environmental conditions are detected, they can be compensated for, and hence, the accuracy of alarms detected by video-based AID systems will be enhanced. Based on the presented review, this paper will highlight potential research directions to address gaps that currently exist in detecting outdoor environmental conditions. This will lead to an overall enhancement in the reliability of video-based AID systems and, hence, pave the road for more usage of these systems in the future. Last, this paper suggests new contributions in the form of new suggested algorithmic ideas to detect environmental factors that affect AID systems accuracy.

Effects of static cast shadows on size judgments

Effects of static cast shadows on size judgments

The perception and recognition of natural object shape from deforming and static shadows.

In this study of the informativeness of shadows for the perception of object shape, observers viewed shadows cast by a set of natural solid objects and were required to discriminate between them. In some conditions the objects underwent rotation in depth while in other conditions they remained stationary, thus producing both deforming and static shadows. The orientation of the light source casting the shadows was also varied, leading to further alterations in the shape of the shadows. When deformations in the shadow boundary were present, the observers were able to reliably recognize and discriminate between the objects, invariant over the shadow distortions produced by movements of the light source. The recognition performance for the static shadows depended critically upon the content of the specific views that were shown. These results support the idea that there are invariant features of shadow boundaries that permit the recognition of shape (cf Koenderink, 1984 Perception 13 321-330).

Monitoring of Respiratory Function in Critical Care Patients

This section contains descriptions of machinery and procedures related to the respiratory care of surgical patients. Positive-pressure devices and ventilators come in a variety of types, each with its own bedazzling set of knobs, gauges, alarms, and blinking lights. Drinker and Berryman’s description of ventilators is written from the viewpoint of the bioengineer. The principles they outline will help the surgeon to feel at home with any mechanical ventilator in current or future use. Gallagher and coauthors divide monitoring methods into pulmonary mechanics, gas exchange, and systemic oxygen delivery. In addition to these specific techniques, they present the practical pitfalls that are commonly encountered. The next four articles could be subtitled "Surgical Care of the Respiratory Patient." The articles by Orringer, Gazzaniga, and Connolly form a mini-atlas of techniques and procedures. All surgeons will benefit from a review of these often neglected details. Bronchoscopy should be as routine to general and thoracic surgeons as cystoscopy is to the urologist, yet this important technique is often neglected in residency training. Ratliff leaves description of bronchoscopic techniques to existing atlases and on-site training and devotes his discussion to when, why, and how bronchoscopy should be used in respiratory care. Eric Milne is noted for his studies of chest radiography in acute lung disease. His clear descriptions and examples provide a useful bridge between dynamic physiology and the static shadows on the celluloid.

Endotracheal Intubation and Tracheostomy: Indications, Techniques, and Complications

This section contains descriptions of machinery and procedures related to the respiratory care of surgical patients. Positive-pressure devices and ventilators come in a variety of types, each with its own bedazzling set of knobs, gauges, alarms, and blinking lights. Drinker and Berryman’s description of ventilators is written from the viewpoint of the bioengineer. The principles they outline will help the surgeon to feel at home with any mechanical ventilator in current or future use. Gallagher and coauthors divide monitoring methods into pulmonary mechanics, gas exchange, and systemic oxygen delivery. In addition to these specific techniques, they present the practical pitfalls that are commonly encountered. The next four articles could be subtitled Surgical Care of the Respiratory Patient. The articles by Orringer, Gazzaniga, and Connolly form a mini-atlas of techniques and procedures. All surgeons will benefit from a review of these often neglected details. Bronchoscopy should be as routine to general and thoracic surgeons as cystoscopy is to the urologist, yet this important technique is often neglected in residency training. Ratliff leaves description of bronchoscopic techniques to existing atlases and on-site training and devotes his discussion to when, why, and how bronchoscopy should be used in respiratory care. Eric Milne is noted for his studies of chest radiography in acute lung disease. His clear descriptions and examples provide a useful bridge between dynamic physiology and the static shadows on the celluloid.

Ventilation: External Regulation of the Environment of the Lung

This section contains descriptions of machinery and procedures related to the respiratory care of surgical patients. Positive-pressure devices and ventilators come in a variety of types, each with its own bedazzling set of knobs, gauges, alarms, and blinking lights. Drinker and Berryman’s description of ventilators is written from the viewpoint of the bioengineer. The principles they outline will help the surgeon to feel at home with any mechanical ventilator in current or future use. Gallagher and coauthors divide monitoring methods into pulmonary mechanics, gas exchange, and systemic oxygen delivery. In addition to these specific techniques, they present the practical pitfalls that are commonly encountered. The next four articles could be subtitled “Surgical Care of the Respiratory Patient.” The articles by Orringer, Gazzaniga, and Connolly form a mini-atlas of techniques and procedures. All surgeons will benefit from a review of these often neglected details. Bronchoscopy should be as routine to general and thoracic surgeons as cystoscopy is to the urologist, yet this important technique is often neglected in residency training. Ratliff leaves description of bronchoscopic techniques to existing atlases and on-site training and devotes his discussion to when, why, and how bronchoscopy should be used in respiratory care. Eric Milne is noted for his studies of chest radiography in acute lung disease. His clear descriptions and examples provide a useful bridge between dynamic physiology and the static shadows on the celluloid.

Surgical Management of Complications of Respiratory Failure

This section contains descriptions of machinery and procedures related to the respiratory care of surgical patients. Positive-pressure devices and ventilators come in a variety of types, each with its own bedazzling set of knobs, gauges, alarms, and blinking lights. Drinker and Berryman’s description of ventilators is written from the viewpoint of the bioengineer. The principles they outline will help the surgeon to feel at home with any mechanical ventilator in current or future use. Gallagher and coauthors divide monitoring methods into pulmonary mechanics, gas exchange, and systemic oxygen delivery. In addition to these specific techniques, they present the practical pitfalls that are commonly encountered. The next four articles could be subtitled "Surgical Care of the Respiratory Patient." The articles by Orringer, Gazzaniga, and Connolly form a mini-atlas of techniques and procedures. All surgeons will benefit from a review of these often neglected details. Bronchoscopy should be as routine to general and thoracic surgeons as cystoscopy is to the urologist, yet this important technique is often neglected in residency training. Ratliff leaves description of bronchoscopic techniques to existing atlases and on-site training and devotes his discussion to when, why, and how bronchoscopy should be used in respiratory care. Eric Milne is noted for his studies of chest radiography in acute lung disease. His clear descriptions and examples provide a useful bridge between dynamic physiology and the static shadows on the celluloid.

Bronchoscopy in Respiratory Care

This section contains descriptions of machinery and procedures related to the respiratory care of surgical patients. Positive-pressure devices and ventilators come in a variety of types, each with its own bedazzling set of knobs, gauges, alarms, and blinking lights. Drinker and Berryman’s description of ventilators is written from the viewpoint of the bioengineer. The principles they outline will help the surgeon to feel at home with any mechanical ventilator in current or future use. Gallagher and coauthors divide monitoring methods into pulmonary mechanics, gas exchange, and systemic oxygen delivery. In addition to these specific techniques, they present the practical pitfalls that are commonly encountered. The next four articles could be subtitled Surgical Care of the Respiratory Patient. The articles by Orringer, Gazzaniga, and Connolly form a mini-atlas of techniques and procedures. All surgeons will benefit from a review of these often neglected details. Bronchoscopy should be as routine to general and thoracic surgeons as cystoscopy is to the urologist, yet this important technique is often neglected in residency training. Ratliff leaves description of bronchoscopic techniques to existing atlases and on-site training and devotes his discussion to when, why, and how bronchoscopy should be used in respiratory care. Eric Milne is noted for his studies of chest radiography in acute lung disease. His clear descriptions and examples provide a useful bridge between dynamic physiology and the static shadows on the celluloid.

Thoracotomy and Pulmonary Resection

This section contains descriptions of machinery and procedures related to the respiratory care of surgical patients. Positive-pressure devices and ventilators come in a variety of types, each with its own bedazzling set of knobs, gauges, alarms, and blinking lights. Drinker and Berryman’s description of ventilators is written from the viewpoint of the bioengineer. The principles they outline will help the surgeon to feel at home with any mechanical ventilator in current or future use. Gallagher and coauthors divide monitoring methods into pulmonary mechanics, gas exchange, and systemic oxygen delivery. In addition to these specific techniques, they present the practical pitfalls that are commonly encountered. The next four articles could be subtitled "Surgical Care of the Respiratory Patient." The articles by Orringer, Gazzaniga, and Connolly form a mini-atlas of techniques and procedures. All surgeons will benefit from a review of these often neglected details. Bronchoscopy should be as routine to general and thoracic surgeons as cystoscopy is to the urologist, yet this important technique is often neglected in residency training. Ratliff leaves description of bronchoscopic techniques to existing atlases and on-site training and devotes his discussion to when, why, and how bronchoscopy should be used in respiratory care. Eric Milne is noted for his studies of chest radiography in acute lung disease. His clear descriptions and examples provide a useful bridge between dynamic physiology and the static shadows on the celluloid.

Chest Radiology in the Surgical Patient

This section contains descriptions of machinery and procedures related to the respiratory care of surgical patients. Positive-pressure devices and ventilators come in a variety of types, each with its own bedazzling set of knobs, gauges, alarms, and blinking lights. Drinker and Berryman’s description of ventilators is written from the viewpoint of the bioengineer. The principles they outline will help the surgeon to feel at home with any mechanical ventilator in current or future use. Gallagher and coauthors divide monitoring methods into pulmonary mechanics, gas exchange, and systemic oxygen delivery. In addition to these specific techniques, they present the practical pitfalls that are commonly encountered. The next four articles could be subtitled Surgical Care of the Respiratory Patient. The articles by Orringer, Gazzaniga, and Connolly form a mini-atlas of techniques and procedures. All surgeons will benefit from a review of these often neglected details. Bronchoscopy should be as routine to general and thoracic surgeons as cystoscopy is to the urologist, yet this important technique is often neglected in residency training. Ratliff leaves description of bronchoscopic techniques to existing atlases and on-site training and devotes his discussion to when, why, and how bronchoscopy should be used in respiratory care. Eric Milne is noted for his studies of chest radiography in acute lung disease. His clear descriptions and examples provide a useful bridge between dynamic physiology and the static shadows on the celluloid.