State Energy Research Articles

A Thorough Examination of the Variables Affecting the Quantum Efficiency of Radiative Decay of Trichlorotriphenylmethyl Radicals.

Fluorescence quantum efficiency is determined by the competition between radiation and nonradiation processes of the excited states. Understanding the factors affecting the radiation and nonradiative decay rates is of great significance for the design of luminescent materials. The excitation state deactivation mechanisms of singlet and triplet states have been extensively studied, providing a comprehensive understanding of the processes involved in the relaxation of these states. However, research on free radical systems involving doublet states is relatively scarce. Therefore, in this study, radiation and nonradiative decay rates and the mechanism of a series of trichlorotriphenylmethyl-based radicals were investigated theoretically. The results indicate that the relative rotations of electron donor and acceptor, as well as the internal rotations of trichlorotriphenylmethyl moiety, play important roles in energy dissipation through nonradiative channels. The effect of a solid-state environment on the radiation and nonradiative decay rates of radicals was investigated using a combination of quantum mechanics and molecular mechanics methods. The results indicate that the solid-state environment restricts the expansion of the conjugated system in the excited state of radicals, leading to a slight decrease in radiative decay rate. In addition, the solid-state environment reduces the reorganization energy and also affects the adiabatic excitation energy of radicals. The reduction in reorganization energy results in a decrease in nonradiative rate, while the opposite effect is observed for adiabatic excitation energy. The nonradiative rate of radicals in a solid-state environment is thus inflected by a combination of molecular geometric structure relaxation and ground-excited state energy gap.

A unifying quantum speed limit for time-independent Hamiltonian evolution

Abstract Quantum speed limit (QSL) is the study of fundamental limits on the evolution time of quantum systems. For instance, under the action of a time-independent Hamiltonian, the evolution time between an initial and a final quantum state obeys various mutually complementary lower bounds. They include the Mandelstam-Tamm bound, the Margolus-Levitin bound, the Luo-Zhang
 bound, the Lee-Chau bound together with the dualML bound introduced by Ness and coworkers. Here we show that the Mandelstam-Tamm bound can be obtained by optimizing the Lee-Chau bound over a certain parameter. More importantly, we report a QSL that includes all the above bounds as special cases before optimizing over the physically meaningless reference energy level of a quantum system. This unifying bound depends on a certain parameter $p$. For any fixed $p$, we find all pairs of time-independent Hamiltonian and initial pure quantum state that saturate this unifying bound. More importantly, these pairs allow us to compute this bound accurately and efficiently using an oracle that returns certain $p$th moments related to the absolute value of
 energy of the quantum state. Moreover, this oracle can be simulated by a computationally efficient and accurate algorithm for finite-dimensional quantum systems as well as for certain infinite-dimensional quantum states with bounded and continuous energy spectra. This makes our computational method feasible in a lot of practical situations. We find that if the dimension of
 the underlying Hilbert space is $\lesssim 2000$, our unifying bound optimized over $p$ can be computed accurately in a few minutes using Mathematica code with just-in-time compilation in a typical desktop. Besides, this optimized unifying QSL is at least as good as all the existing ones combined and can occasionally be a few percent to a few times better.

Computational Analysis of Low Overpotential Ammonia Oxidation by Metal-Metal Bonded Ruthenium Catalysts, and Predictions for Related Osmium Catalysts.

The catalyzed electrochemical oxidation of ammonia to nitrogen (AOR) is an important fuel-cell half-reaction that underpins a future nitrogen-based energy economy. Our laboratory has reported spontaneous chemical and electrochemical oxidation of ammonia to dinitrogen via reaction of ammonia with the metal-metal bonded diruthenium complex Ru2(chp)4OTf (chp- = 2-chloro-6-hydroxypyridinate, TfO- = trifluoromethanesulfonate). This complex facilitates electrocatalytic ammonia oxidation at mild applied potentials of -255 mV vs ferrocene, which is the [Ru2(chp)4(NH3)]0/+ redox potential. We now report a comprehensive computational investigation of possible mechanisms for this reaction and electronic structure analysis of key intermediates therein. We extend this analysis to proposed second-generation electrocatalysts bearing structurally similar fhp and hmp (2-fluoro-6-hydroxypyridinate and 2-hydroxy-6-methylpyridinate, respectively) equatorial ligands, and we further expand this study from Ru2 to analogous Os2 cores. Predicted M24+/5+ redox potentials, which we expect to correlate with experimental AOR overpotential, depend strongly on the identity of the metal center, and to a lesser degree on the nature of the equatorial supporting ligand. Os2 complexes are easier to oxidize than analogous Ru2 complexes by ∼640 mV, on average. In contrast to mono-Ru catalysts, which oxidize ammonia via a rate-limiting activation of the strong N-H bond, we find lowest-energy reaction pathways for Ru2 and Os2 complexes that involve direct N-N bond formation onto electrophilic intermediates having terminal amido, imido, or nitrido groups. While transition state energies for Os2 complexes are high, those for Ru2 complexes are moderate and notably lower than those for mono-Ru complexes. We attribute these lower barriers to enhanced electrophilicity of the Ru2 intermediates, which is a consequence of their metal-metal bonded structure. Os2 intermediates are found to be, surprisingly, less electrophilic, and we suggest that Os2 complexes may require access to oxidation states higher than Os25+ in order to perform AOR at reasonable reaction rates.

Negative single-trace TT¯\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$ T\\overline{T} $$\\end{document} holography holography versus de Sitter

In single-trace TT¯\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$ T\\overline{T} $$\\end{document} holography, for the negative sign of the deformation, the geometries dual to high energy states consist of a singular UV wall that separates black strings in the IR from an asymptotically linear dilaton spacetime. In the hologram, the black strings amount to states in a symmetric product of TT¯\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$ T\\overline{T} $$\\end{document} deformed CFT2, whose energy and momentum are split equally among the different blocks. The properties of this holographic duality have intriguing similarities with the proposed principles of de Sitter holography. In this note, the analogy between the two is presented. In particular, as the horizon location approaches the UV wall, one obtains a state of maximum finite entropy and infinite temperature. On the other hand, the bulk temperature of the geometry obtained in the limit is small. These properties are identical to those proposed in empty de Sitter holography.

Optoelectronic and transport properties of Lead-Free halide based Na2AgTlZ6 (Z = Cl, Br, I) double perovskites for energy harvesting applications

The bandgap engineering and deliberate band edge manipulation of perovskites make them potential candidates for the photovoltaic industry. Here we theoretically investigate the structure, density of states, and photovoltaic and thermoelectric characteristics of Na2AgTlZ6 (Z = Cl, Br, I) using WIEN2k code. The incorporation of Br and I at the Cl site caused the increase in lattice constant which leads to the decrease in bulk modulus and Debye temperature. The computed values of Poisson (<0.26) and Pugh (<1.75) ratio verified their brittle nature. The bandgap analysis reveals direct bandgap nature and bandgap value lie in the visible region for parent composition and infrared and far infrared when Cl is replaced with Br and I. The density of state plots uncovers the shifting of energy states in valence and conduction bands towards the Fermi level with the increasing number of electrons in the halogens. The increase in the value of dielectric constant, refractive index, and shifting of peaks towards lower energy value is witnessed with atomic number of halogen atoms. The viability of these compositions for thermoelectric devices is further confirmed when electrical conductivity and Seebeck coefficient dependent Figure of merit and power factor are evaluated in the temperature range of 200–800 K. In addition, the anisotropic nature of studied compositions is explored through the computation of the modulus of elasticity including Young’s modulus, Shear modulus in addition to compressibility, and Poisson’s ratio.

First principles study of transition metal (TM = Sc, Ti, V, Cr, Mn) doped penta-BAs5 monolayer for adsorption of CO, NH3, NO, SO2

In this paper, the adsorption capacity of intrinsic penta-BAs5 monolayer on CO, NH3, NO, SO2 and the effect of transition metal doping on gas sensing characteristics are systematically studied by first-principles calculations. Adsorption energy, recovery time, band structure, charge transfer and density of states (DOS) are investigated. The electronic properties and sensing mechanisms under different adsorption systems are expounded. The results showed that the intrinsic penta-BAs5 monolayer had the strongest adsorption capacity for NO and weak sensitivity to CO, NH3 and SO2, which shown strong gas selectivity. Moreover, the recovery time of NO at 380 k was 3.93 s, which was more inclined to be desorption at high temperature. In addition, Sc and Ti doping could selectively improve the adsorption capacity of the intrinsic penta-BAs5 monolayer. The charge transfer of SO2-Sc-BAs5 and CO-Ti-BAs5 were increased by 6.78 and 10.33 times compared with those before doping. The band structure and DOS show that Ti atom and CO have orbital hybridization, which improved the interaction between gases and penta-BAs5. Therefore, intrinsic penta-BAs5, Sc-BAs5 and Ti-BAs5 are suitable for gas sensing and toxic gas monitoring, and have broad application prospects.

Isotropic compact stars admitting Heintzmann solution in Rastall gravity

This paper is devoted to observe the physical attributes of static spherically symmetric isotropic compact stellar candidates in the context of Rastall theory of gravity. In order to inspect the structural composition of compact objects, the Heintzmann ansatz is taken into account. The unknown parameters associated with Heintzmann ansatz are evaluated through matching conditions with derived values of radii and masses of some specific star models. The consistency of the adopted ansatz is analyzed via graphical interpretation of matter variables, equation of state parameter, mass components, energy constraints, causality condition, stellar equation and adiabatic index for several choices of Rastall parameter. It is observed that the stars under consideration manifest stable structures corresponding to Heintzmann ansatz in this framework. Moreover, it is shown that for vanishing Rastall coupling parameter, the standard outcomes of general relativity can be retrieved.

Photoionization and Dissociative Photoionization of Acetaldehyde in the 10.0-13.7 eV Range by Synchrotron Photoelectron Photoion Coincidence Spectroscopy.

Photoionization and dissociative photoionization of acetaldehyde (CH3CHO) in the 10.0-13.7 eV energy range are studied by using synchrotron radiation double imaging photoelectron photoion coincidence spectroscopy (i2PEPICO). The X2A' and A2A" electronic states of CH3CHO+ as well as the Franck-Condon gap region between these two states have been populated with several vibrational sequences and assigned in the high-resolution slow photoelectron spectrum (SPES). The adiabatic ionization energies (AIEs) of the X2A' and A2A" states are measured at 10.228±0.006 and 12.52±0.05 eV, respectively. The present results show that the X2A' state is a stable state while the A2A" state is fully dissociative to produce CH3CO+, CHO+ and CH4 + fragment ions. The 0 K appearance energies (AE0K) of CH3CO+ and CHO+ fragment ions are determined through the modeling of the breakdown diagram, i. e., AE0K(CH3CO+)=10.89±0.01 eV (including a reverse barrier of ~0.19 eV) and AE0K(CHO+)=11.54±0.05 eV. In addition, the dissociation mechanisms of CH3CHO+ including statistical dissociation, direct bond breaking and isomerization are discussed with the support of the calculated dissociation limits and transition state energies.

White Light Emissive Eu(III) Complexes through Ligand Engineering and their Applications in Cool Near Ultraviolet White Light Emitting Diodes and Thermometer.

In pursuit of enhancing white light quality for SSLapplications, an attempt has been made to design novel imidazo-bipyridyl ligands as an ancillary ligand to obtain multiple emissions (mimic sunlight) in the Eu-complex. By strategically modifying the phenanthroline core with imidazo-bipyridyl incorporation with 1 or 2-Napthyl groups at the C1 position, the excitation spectral line is successfully shifted from Ultraviolet (UV) to near UV/visible spectrum (where the LED emission occurs). The ligands showed greenish blue emission in solid and solution. The analysis revealed that the energy transfer is incomplete, primarily attributed to the proximity of triplet state energy levels to the resonance level of Eu(III) ions as reflected in solvatochromism. These complexes exhibit a unique dual emissive behavior (emitting multi-color) including white light across various solvents. The fabricated white LED showed an excellent color rendering index (CRI ~93 %). Beyond lighting, this distinctive property opens avenues for temperature sensing ([Eu(DBM)31-Naph] shows the highest sensitivity of Sr = 10.97 %, and [Eu(DBM)32-Naph] shows the highest sensitivity of Sr = 5.5 % at 333K) and vapoluminescent studies. This research pioneers the development of these complexes as potential single-component materials for white LEDs, underlining their multifaceted utility in cutting-edge lighting and sensing technologies.

Photoionization treatment of encompassed plasma-implanted exotic atoms

This work chews over exotic systems embedded in a non-ideal classical plasma (NICP) under impenetrable spherical confinement, including μH\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\mu \\hbox {H}$$\\end{document}, (μHe)+\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$(\\mu \\hbox {He})^{+}$$\\end{document}, and (μLi)++\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$(\\mu \\hbox {Li})^{++}$$\\end{document} systems within a nonrelativistic formalism. The photoionization processes of exotic atomic systems are thoroughly analyzed for different values of the NICP’s plasma screening parameter, hence plasma temperature and density, and the radius of spherical confinement. In each case, the energy levels of exotic systems are shown and interpreted in terms of their characteristics. The heavy nature of the muon significantly influences the entire process. Additionally, observable outcomes of different attraction effects originating from the nucleus in muonic systems on both the spectrum and photoionization are identified. The short lifetimes of relevant exotic systems due to the muon and the high bound state energies resulting from the strong attraction energy of the muon significantly inconvenience the photoionization process. However, these disadvantages can be overcome thanks to NICP and spherical confinement, thereby facilitating experimental applications. Important findings regarding these facilitation processes are presented in the present work.Graphical abstract

Entanglement asymmetry in CFT and its relation to non-topological defects

The entanglement asymmetry is an information based observable that quantifies the degree of symmetry breaking in a region of an extended quantum system. We investigate this measure in the ground state of one dimensional critical systems described by a CFT. Employing the correspondence between global symmetries and defects, the analysis of the entanglement asymmetry can be formulated in terms of partition functions on Riemann surfaces with multiple non-topological defect lines inserted at their branch cuts. For large subsystems, these partition functions are determined by the scaling dimension of the defects. This leads to our first main observation: at criticality, the entanglement asymmetry acquires a subleading contribution scaling as log ℓ/ℓ for large subsystem length ℓ. Then, as an illustrative example, we consider the XY spin chain, which has a critical line described by the massless Majorana fermion theory and explicitly breaks the U(1) symmetry associated with rotations about the z-axis. In this situation the corresponding defect is marginal. Leveraging conformal invariance, we relate the scaling dimension of these defects to the ground state energy of the massless Majorana fermion on a circle with equally-spaced point defects. We exploit this mapping to derive our second main result: the exact expression for the scaling dimension associated with n defects of arbitrary strengths. Our result generalizes a known formula for the n = 1 case derived in several previous works. We then use this exact scaling dimension to derive our third main result: the exact prefactor of the log ℓ/ℓ term in the asymmetry of the critical XY chain.

Solutions of the Schrödinger equation with velocity-dependent potentials:a study on Kratzer, Mie and Hulthen potentials

The effect of isotropic velocity-dependent potentials on the bound state energy eigenvalues of the Kratzer, Mie and Hulthen potentials is obtained for any quantum states in the presence of constant form factor εr=γρ0. The corresponding energy eigenvalues and eigenfunctions are determined and tabulated for a set of finite quantum numbers n and l in the framework of the well-known Nikiforov-Uvarov method.

Information flow in parameterized quantum circuits

In this work, we introduce a new way to quantify information flow in quantum systems, especially for parameterized quantum circuits (PQCs). We use a graph representation of the circuits and propose a new distance metric using the mutual information between gate nodes. We then present an optimization procedure for variational algorithms using paths based on the distance measure. We explore the features of the algorithm by means of the variational quantum eigensolver, in which we compute the ground state energies of the Heisenberg model. In addition, we employ the method to solve a binary classification problem using variational quantum classification. From numerical simulations, we show that our method can be successfully used for optimizing the PQCs primarily used in near-term algorithms. We further note that information-flow based paths can be used to improve convergence of existing stochastic gradient based methods.

Range-separated density functional theory using multiresolution analysis and quantum computing.

Quantum computers are expected to outperform classical computers for specific problems in quantum chemistry. Such calculations remain expensive, but costs can be lowered through the partition of the molecular system. In the present study, partition was achieved with range-separated density functional theory (RS-DFT). The use of RS-DFT reduces both the basis set size and the active space size dependence of the ground state energy in comparison with the use of wave function theory (WFT) alone. The utilization of pair natural orbitals (PNOs) in place of canonical molecular orbitals (MOs) results in more compact qubit Hamiltonians. To test this strategy, a basis-set independent framework, known as multiresolution analysis (MRA), was employed to generate PNOs. Tests were conducted with the variational quantum eigensolver for a number of molecules. The results show that the proposed approach reduces the number of qubits needed to reach a target energy accuracy.

Novel Photocatalyst Based on Through‐Space Charge Transfer Induced Intersystem Crossing Enables Rapid and Efficient Polymerization Under Low‐Power Excitation Light

AbstractCurrently, most photoredox catalysis polymerization systems are limited by high excitation power, long polymerization time, or the requirement of electron donors due to the precise design of efficient photocatalysts still poses a great challenge. Herein, we propose a new approach: the creation of efficient photocatalysts having low ground state oxidation potentials and high excited state energy levels, along with through‐space charge transfer (TSCT) induced intersystem crossing (ISC) properties. A cabazole‐naphthalimide (NI) dyad (NI‐1) characterized by long triplet excited state lifetime (τT=62 μs), satisfactory ISC efficiency (ΦΔ=54.3 %) and powerful reduction capacity [Singlet: E1/2 (PC+1/*PC)=−1.93 eV, Triplet: E1/2 (PC+1/*PC)=−0.84 eV] was obtained. An efficient and rapid polymerization (83 % conversion of 1 mM monomer in 30 s) was observed under the conditions of without electron donor, low excitation power (10 mW cm−2) and low catalyst (NI‐1) loading (&lt;50 μM). In contrast, the conversion rate was lower at 29 % when the reference catalyst (NI‐4) was used for photopolymerization under the same conditions, demonstrating the advantage of the TSCT photocatalyst. Finally, the TSCT material was used as a photocatalyst in practical lithography for the first time, achieving pattern resolutions of up to 10 μm.

Meta-optimization of resources on quantum computers

The current state of quantum computing is commonly described as the Noisy Intermediate-Scale Quantum era. Available computers contain a few dozens of qubits and can perform a few dozens of operations before the inevitable noise erases all information encoded in the calculation. Even if the technology advances fast within the next years, any use of quantum computers will be limited to short and simple tasks, serving as subroutines of more complex classical procedures. Even for these applications the resource efficiency, measured in the number of quantum computer runs, will be a key parameter. Here we suggest a general meta-optimization procedure for hybrid quantum-classical algorithms that allows finding the optimal approach with limited quantum resources. This method optimizes the usage of resources of an existing method by testing its capabilities and setting the optimal resource utilization. We demonstrate this procedure on a specific example of variational quantum algorithm used to find the ground state energy of a hydrogen molecule.

Ultrastable Copper Iodide Hybrid with Intrinsic Greenish White-Light Emission by Incorporating an Anionic Inorganic Functional Unit into an Extended Structure.

Incorporating a functional unit into the multidimensional coordination polymer skeleton is an efficient way to improve the stability of materials and expand their application. In this paper, anionic copper iodide inorganic functional modules are incorporated into one-dimensional extended chains by using a unique bidentate cationic organic ligand. Benefiting from the ionic extended structure, the resulting hybrid possesses a remarkable stability with a decomposition temperature as high as 300 °C. Meanwhile, the hybrid material exhibits intrinsic greenish white-light emission with a high photoluminescent quantum yield of 70%. The emission was investigated by temperature-dependent emission spectra, which proved to be the result of the synergistic effect of two energy states. The novel synthetic strategy provides an efficient route for the development of functional organic metal halides.

Nuclear Physics in the Era of Quantum Computing and Quantum Machine Learning

AbstractIn this paper, the application of quantum simulations and quantum machine learning is explored to solve problems in low‐energy nuclear physics. The use of quantum computing to address nuclear physics problems is still in its infancy, and particularly, the application of quantum machine learning (QML) in the realm of low‐energy nuclear physics is almost nonexistent. Three specific examples are presented where the utilization of quantum computing and QML provides, or can potentially provide in the future, a computational advantage: i) determining the phase/shape in schematic nuclear models, ii) calculating the ground state energy of a nuclear shell model‐type Hamiltonian, and iii) identifying particles or determining trajectories in nuclear physics experiments.

Assessment of Stress and Well-Being of Japanese Employees Using Wearable Devices for Sleep Monitoring Combined With Ecological Momentary Assessment: Pilot Observational Study.

Poor sleep quality can elevate stress levels and diminish overall well-being. Japanese individuals often experience sleep deprivation, and workers have high levels of stress. Nevertheless, research examining the connection between objective sleep assessments and stress levels, as well as overall well-being, among Japanese workers is lacking. This study aims to investigate the correlation between physiological data, including sleep duration and heart rate variability (HRV), objectively measured through wearable devices, and 3 states (sleepiness, mood, and energy) assessed through ecological momentary assessment (EMA) and use of rating scales for stress and well-being. A total of 40 office workers (female, 20/40, 50%; mean age 40.4 years, SD 11.8 years) participated in the study. Participants were asked to wear a wearable wristband device for 8 consecutive weeks. EMA regarding sleepiness, mood, and energy levels was conducted via email messages sent by participants 4 times daily, with each session spaced 3 hours apart. This assessment occurred on 8 designated days within the 8-week timeframe. Participants' stress levels and perception of well-being were assessed using respective self-rating questionnaires. Subsequently, participants were categorized into quartiles based on their stress and well-being scores, and the sleep patterns and HRV indices recorded by the Fitbit Inspire 2 were compared among these groups. The Mann-Whitney U test was used to assess differences between the quartiles, with adjustments made for multiple comparisons using the Bonferroni correction. Furthermore, EMA results and the sleep and HRV indices were subjected to multilevel analysis for a comprehensive evaluation. The EMA achieved a total response rate of 87.3%, while the Fitbit Inspire 2 wear rate reached 88.0%. When participants were grouped based on quartiles of well-being and stress-related scores, significant differences emerged. Specifically, individuals in the lowest stress quartile or highest subjective satisfaction quartile retired to bed earlier (P<.001 and P=.01, respectively), whereas those in the highest stress quartile exhibited greater variation in the midpoint of sleep (P<.001). A multilevel analysis unveiled notable relationships: intraindividual variability analysis indicated that higher energy levels were associated with lower deviation of heart rate during sleep on the preceding day (β=-.12, P<.001), and decreased sleepiness was observed on days following longer sleep durations (β=-.10, P<.001). Furthermore, interindividual variability analysis revealed that individuals with earlier midpoints of sleep tended to exhibit higher energy levels (β=-.26, P=.04). Increased sleep variabilities, characterized by unstable bedtime or midpoint of sleep, were correlated with elevated stress levels and diminished well-being. Conversely, improved sleep indices (eg, lower heart rate during sleep and earlier average bedtime) were associated with heightened daytime energy levels. Further research with a larger sample size using these methodologies, particularly focusing on specific phenomena such as social jet lag, has the potential to yield valuable insights. UMIN-CTR UMIN000046858; https://center6.umin.ac.jp/cgi-open-bin/ctr/ctr_view.cgi?recptno=R000053392.

Calculating the Density Energy of Se100-XGeX and Se62Ge35X3 Semiconductor Materials

In this paper, chalcogenide glasses are studied using a range of experimental techniques for the purpose of understanding their electrical properties with the aim of providing new strategies for producing a new class of electronic devices made of advanced amorphous materials. The electrical properties of chalcogenide glass are very low cost to produce competitive devices; hence, a deeper understanding of their electrical transport properties may provide the necessary insight to enhance merit. For this purpose, the electrical properties studied by some researchers were relied upon, mathematical equations were performed and the program is designed to compute the energy state density in both extended and localized systems region of Se100-xGex with (x = 5, 25, 28, 30 and 38) and Se62Ge35X3 glasses (where X is Sb, Sn, or Bi) in different concentrations. Characterizing the electrical properties of Se100-xGex and Se62Ge35X3 glasses use to determine the density of energy states. The results of electrical measurements confirmed the presence of two mechanisms of electrical conduction: conduction in extended states at high temperatures and conduction in localized states at medium temperatures. Effective substitution results in a change in the local and extended state coefficients. This effect was measured as a function of concentration.