Physicochemical Properties Of Starch Research Articles

Relations Between Amylose Content and Physicochemical Properties of Starches from White and Red Sorghum Varieties

AbstractThis research aims to determine the relationship between amylose content and physicochemical properties in white and red sorghum starches. Five varieties of red sorghum and four varieties of white sorghum were evaluated. The chemical properties, the amylose content, the resistant starch content, scanning electron microscopy, the absorption and solubility index in water, the viscosity profile, the thermal properties, and the correlation between the amylose content were determined. Sorghum starches had an amylose content between 24.51% and 34.34%, but did not show any relationship with color. Regarding the microstructure, the starches that appear larger granules (20–30 µm) have lower amylose content. Sorghum red varieties shown higher values in gelatinization enthalpy, pasting temperature and water absortion index, this effect was attributed to the formation of complexes with phenolic compounds. Starches with a higher proportion of amylose shown lower viscosity profiles and a high thermal stability. Correlation matrix analysis reveals that amylose content had a negative correlation with water absorption index, water solubility index, maximum viscosity, minimum viscosity, and positive correlation with the resistant starch content. The amylose content can define the potential application of the sorghum starches.

Micronization induced gelatinization of tapioca starch and its effects on starch physicochemical and structural properties.

The vibrating superfine mill (VSM) is a machine that belongs to the micronization technique. In this study, VSM was employed to produce micronized tapioca starch by varying micronization times (15, 30, 45, and 60min). The structural and physicochemical properties of the micronized starch were then examined. Scanning electron microscopy studies revealed that micronized starch was partially gelatinized, and the granule size dramatically increased when micronization time increased. X-ray diffraction patterns showed that the relative crystallinity was decreased from 24.67% (native) to 4.13% after micronization treatment for 15min and slightly decreased after that. The solubility of micronized starch significantly increased as the micronization time increased, which was associated with the destruction of the starch crystalline structure. Differential scanning calorimetry investigations confirmed that micronized starch was "partly gelatinized," and the degree of gelatinization increased to 81.27% when the micronization time was 60min. The weight-average molar mass was reduced by 15.0% (15min), 30.9% (30min), 55.7% (45min), and 70.5% (60min), respectively, indicating that the molecular structure was seriously degraded. The results demonstrated that the physicochemical changes of micronized starch granules were related to the destruction of the starch structure. These observations would provide details on micronized starch and its potential applications. PRACTICAL APPLICATION: These observations would provide details on micronized starch and its potential applications. Moreover, we believe that when the structures of starches were known, it is probable that the effect of VSM on the structural and physicochemical properties change of other starches might be predicted by adjusting the processing time.

Ultrasound-assisted extraction and physicochemical properties of starch from Cyperus esculentus tubers

The purpose of this study was to use ultrasound-based extraction to prepare starch from the tubers of Cyperus esculentus. Ultrasonic treatment of Cyperus esculentus powder with a medium of alkaline-treated water can effectively improve the starch extraction efficiency. Box-Behnken design was used to optimize the extraction process, and the results showed that the optimal parameters were ultrasound time of 30 minutes, pH value of 9.0, ultrasound temperature of 40 °C, and solid-liquid ratio of 10:1. The extraction percentage under these conditions was 90.1%. The physicochemical properties of C. esculentus starch were compared with those of cassava, potato, and corn starch. The particle size of C. esculentus starch was approximately 2 to 15 μm. The gelatinization temperature was 70.5 °C, and the peak viscosity was similar to cassava but with better thermal stability. Like other tuber starches, C. esculentus starch had higher swelling power and solubility at 85 °C.

Effects of soaking glutinous sorghum grains on physicochemical properties of starch

Glutinous sorghum grains were soaked (60–80 °C, 2–8 h) to explore the effects of soaking, an essential step in industrial processing of brewing, on starch. As the soaking temperature increased, the peak viscosity and crystallinity of starch gradually decreased, while the enzymatic hydrolysis rate and storage modulus first increased and then decreased. At 70 °C, the content of amylose, the enzymatic hydrolysis rate of starch, and the final viscosity first increase and then decrease with the increase of soaking time, reaching their maximum at 6 h, increased by 53.1 %, 11.0 %, and 10.4 %, respectively, as compared with the non-soaked sample. At 80 °C (4 h), the laser confocal microscopy images showed a network structure formed between the denatured protein chains and the leached-out amylose chains. The molecular weights of starch before and after soaking were all in the range of 3.82–8.98 × 107 g/mol. Since 70 °C is lower than that of starch gelatinization and protein denaturation, when soaking for 6 h, the enzymatic hydrolysis rate of starch is the highest, and the growth of miscellaneous bacteria is inhibited, which is beneficial for subsequent processing technology. The result provides a theoretical basis for the intelligent control of glutinous sorghum brewing.

Hot air–assisted radio frequency drying of corn kernels: the effect on structure and functionality properties of corn starch

Hot air (HA) drying caused quality damage of grains with long treatment time. Radio frequency (RF) heating as an emerging technology was applied to improve drying quality of cereals effectively. The effects of HA-RF drying (50 °C, 70 °C, 90 °C) of corn kernels on the morphology, structure, and physicochemical properties of starch were investigated and compared with HA drying. The surface of treated starch became rough, along with fragments and pores. Drying treatments increased the amylose content from 10.59 % to 23.88 % and the residual protein content of starch from 0.58 % to 1.23 %, and reduced the crystallinity from 31.95 % to 17.15 % and short–range order structures of starch from 0.918 to 0.868. The change of structures in turn resulted in the increase of pasting viscosity, gelatinization temperature, storage modulus and loss modulus. Furthermore, the HA-RF dried starch displayed stronger thermal stability, higher gelatinization degree and better gelation properties than the HA-treated starch at the same temperature. The data proved that the synergistic effects of HA and RF were more effective in modulating the starch structure and improving the functional characteristics of corn starch. This paper would like to provide potential reference for better application of HA-RF technologies to corn.

Cooked Rice Textural Properties and Starch Physicochemical Properties from New Hybrid Rice and Their Parents.

Although great progress has been made in the development of hybrid rice with increased yield, challenges for the improvement of grain quality still remain. In this study, the textural properties of cooked rice and physicochemical characteristics of starch were investigated for 29 new hybrid rice derived from 5 sterile and 11 restorer rice lines. Except for one sterile line Te A (P1) with high apparent amylose content (AAC) (26.9%), all other parents exhibited a low AAC. Gui 263 demonstrated the highest AAC (20.6%) among the restorer lines, so the Te A/Gui 263 hybrid displayed the highest AAC (23.1%) among all the hybrid rice. The mean AAC was similar between sterile, restorer lines and hybrid rice. However, the mean hardness of cooked rice and gels of sterile lines were significantly higher than that of restorer lines and hybrid rice (p < 0.05). Pasting temperature and gelatinization temperatures were significantly higher in the hybrids than in the restorer lines (p < 0.05). Cluster analysis based on the physicochemical properties divided the parents and hybrid rice into two major groups. One group included P1 (Te A), P12 and P14 and three hybrid rice derived from P1, while the other group, including 39 rice varieties, could be further divided into three subgroups. AAC showed significant correlation with many parameters, including peak viscosity, hot peak viscosity, cold peak viscosity, breakdown, setback, onset temperature, peak temperature, conclusion temperature, enthalpy of gelatinization, gel hardness and cooked rice hardness (p < 0.05). Principal component analysis revealed that the first component, comprised of the AAC, peak viscosity, breakdown, setback, onset temperature, peak temperature, conclusion temperature and gel hardness, explained 44.1% of variance, suggesting AAC is the most important factor affecting the grain quality of hybrid rice. Overall, this study enables targeted improvements to key rice grain quality attributes, particularly AAC and textural properties, that will help to develop superior rice varieties.

Resistant starch formation and changes in physicochemical properties of waxy and non-waxy rice starches by autoclaving-cooling treatment

ABSTRACT Resistant starch (RS) has drawn great attention from both starch research and industrial communities due to its potential health benefits. Physical starch modification approach, such as autoclaving and cooling cycle treatment, offers high potential method of enhancing resistant starch fraction due to its simplicity and cost-effectiveness. Here, the non-waxy KDML105 and waxy RD6 rice starches were physically modified by one, three, and five autoclaving and cooling cycles. The comparative impacts of the modification on the RS content and starch physicochemical properties were examined. Their native starch granules were transformed into a larger continuous matrix with suppressed thermal and pasting properties. However, modified KDML105 starch gels with higher amylose content and the presence of amylose lipid complexes were able to retrograde and maintain viscosity better than the modified RD6 starch. The RS content was also increased with the addition of treatment cycles in KDML105 starch. As a result, the RS content of native KDML105 starch was enhanced from 0.13% to 2.59% after five cycles of the treatment. The dissimilarities observed between the two modified starches could be due to the different degrees of increased proportions of ordered (R1047/1022) and double helical (R995/1022) structures, and the disruption of A- and V-type crystals. Therefore, the RS content was attributed to an interplay of alterations in ordered structure, amylose, and amylose-lipid complex during autoclaving-cooling cycles.

Tailoring the physicochemical properties of starch: impact of integrated ultrasonic and ethanol pretreatment on the oil uptake of infrared fried ginkgo seeds.

The structural changes of starch would have a more crucial impact on oil absorption and quality changes in starch-rich fruits and vegetables during frying process with enhanced heat transfer (such as infrared frying). In the present study, the influence of integrated ultrasonic and ethanol (US + ethanol) pretreatment on oil uptake in infrared fried (IF) ginkgo seeds was evaluated regarding modifications in the physicochemical properties of starch. The pretreatment was performed with ultrasonic (40 kHz, 300 W) and ethanol osmotic (95%, v/v) treatment individually or integrated for 40 min. The mass transfer in the pretreatment was facilitated by combined ultrasound and ethanol. The swelling power, solubility, and gelatinization degree of starch was significantly increased. Low-frequency-NMR curves and images revealed that the bound water fraction in ginkgo seeds was increased and the water distribution was homogenized. The results of Fourier transform-infrared spectrum and differential scanning calorimeter revealed that the crystalline regions of starch were reduced and the thermal enthalpy was decreased after US + ethanol pretreatment. The total, surface and structural oil content in IF ginkgo seeds with US + ethanol pretreatment was reduced by 29.10%, 34.52% and 29.73%, respectively. The US + ethanol pretreatment led to a thinner crust layer with increased porosity and smaller-sized pores in the IF ginkgo seeds as observed by stereo microscopy and scanning electron microscopy. The changes in structural and physicochemical properties of starch by combined ultrasound and ethanol affect the crust ratio and pore characteristics in fried high-starch fruits and vegetables, thereby reducing oil absorption. © 2024 Society of Chemical Industry.

Effect of Simultaneous Ultrasonication and Protease Treatment on Wet Milling of High‐Amylose Corn

AbstractThe objective of this work is to study the effect of applying simultaneous ultrasonication and alkaline protease treatment to the wet‐milling of high‐amylose corn on improving the starch yield and reducing the starch protein content. After applying the optimal conditions of simultaneous ultrasonication and protease treatment to the wet milling, the starch yield is elevated to 61.3% and the starch protein content is decreased to 0.44% when compared to the conventional process (48.9% and 1.75%, respectively). High‐amylose corn starch extracted using simultaneous ultrasonication and protease treatment has crystalline structure, relative crystallinity, pasting properties, thermal properties, and enzymatic digestibility similar to the one extracted from the conventional process. The results suggest that simultaneous ultrasonication and protease treatment are a friendly approach in improving the yield of high‐amylose corn starch and reducing the starch protein content, causing no obvious change in starch physicochemical properties and enzymatic digestibility. This study provides useful information for scaling up simultaneous ultrasonication and protease treatment to industrial scale with minor modifications of the conventional wet‐milling process.

Impact of soluble soybean polysaccharide on the gelatinization and retrogradation of corn starches with different amylose content

Polysaccharides have a significant impact on the physicochemical properties of starch, and the objective of this study was to examine the effect of incorporating soluble soybean polysaccharide (SSPS) on the gelatinization and retrogradation of corn starches (CS) with varying amylose content. In contrast to high-amylose corn starch (HACS), the degree of gelatinization of waxy corn starch (WCS) and normal corn starch (NCS) decreased with the addition of SSPS. The inclusion of SSPS resulted in reduced swelling power in all CS, and led to a decrease in gel hardness of the starches. The intermolecular forces between SSPS and CS were primarily hydrogen bonding, and a gel network structure was formed, thereby retarding the short-term and long-term retrogradation of CS. Scanning electron microscopy results revealed that the addition of SSPS in starches led to a loose network structure with larger poles and a reduced ordered structure after retrogradation, as observed from the cross-section of formed gels. These findings suggested that SSPS has great potential for applications in starchy foods, as it can effectively retard both gelatinization and retrogradation of starches.

Evaluation of the physico-chemical properties of cassava, cocoyam, sweet potato starches and glucose syrups produced from the hydrolysis of the starches with sorghum malt enzyme extract

Some physicochemical properties of starches from cocoyam, cassava and sweet potato were compared for suitability in glucose syrup production. Glucose syrups were produced from the starch slurry using 30 g of sorghum malt per 250 g starch weight. Malts were produced from Nigerian sorghum varieties; SFF- Sorghum ‘Farafara’ and SFD-Sorghum ‘Farindawa’ (Sorghumbicolor L. Moench). The grains were steeped for 24 h with 8 h air rest and germinated for 96 h. Results showed that malted SFD and SFF-sorghum grains recorded diastatic powers (61.45 and 52.32 DU.g-1), α-amylase (38.19 and 43.3 DU.g-1) and β-amylase (14.13 and 18.15 DU.g-1) activities, respectively. Cocoyam starch contained highest amylose (28.20%) when compared with sweet potato starch (22.50%) and cassava starch (20.40%). Solubility and swelling power of cassava, sweet potato and cocoyam starches were 17.2, 16.5 and 15.3 g.g-1 and 9.6, 6.2 and 7.6% at 90℃, respectively. Cocoyam starch showed the highest transition temperatures (69.5, 73.6, 82.3℃) and gelatinization enthalpy (17.3 J.g-1) than sweet potato (67.4, 71.3, 78.4℃, 12.3 J.g-1) and cassava (61.3, 65.5, 75.6℃, 13.4 J.g-1) starches. Dextrose equivalent for cassava, sweet potato and cocoyam glucose syrups were 40, 36, 30. Cassava starch glucose syrup obtained from SFD-malt hydrolysis met most of the Standard Organization of Nigeria set specifications.

Effect of crude sea grape hydrocolloids extract on the rice starch physicochemical and digestibility properties

The combination of starch and hydrocolloids is widely used in food manufacturing as a thickening agent for texture modification, but a comprehensive understanding of the influence of hydrocolloids on starch properties is lacking. Sea grape (Caulerpa lentillifera) is an underutilized edible green macroalga, which is mainly cultivated in closed systems in Thailand. Here, the effects of a crude aqueous extract of sea grape hydrocolloids on thermal properties, pasting properties, gel morphology, and starch digestibility of rice starch were compared with the addition of carrageenan and sodium alginate, which are the seaweed hydrocolloids widely used in the food industry. Results showed that the addition of crude sea grape hydrocolloid extract increased retrogradation enthalpy similar to carrageenan. The seaweed hydrocolloids also impacted peak viscosity and breakdown of pasting properties. Swollen granules identified in gel morphology studies suggested that the addition of seaweed hydrocolloids restricted starch granule disruption and altered starch digestibility by increasing the rapidly digested starch content. The addition of sea grape hydrocolloids to starch produced a similar outcome to carrageenan and sodium alginate as a possible future substitute.

Feasibility of replacing waxy rice with waxy or sweet-waxy corn viewed from the structure and physicochemical properties of starches

To explore the feasibility of substituting waxy rice with waxy or sweet-waxy corn, eight varieties of waxy and sweet-waxy corns were selected, including three self-cultivated varieties (Feng nuo 168, Feng nuo 211, and Feng nuo 10). Their starches were isolated and used as research objects, and commercially available waxy rice starch (CAWR) and waxy corn starch (CAWC) were used as controls. X-ray diffraction, scanning electron microscopy, differential scanning calorimetry, rapid viscosity analyzer, and rotational rheometer were used to analyze their physicochemical and structural characteristics. The morphologies of all corn starch granules were generally oval or round, with significant differences in particle size distributions. All ten starches exhibited a typical A-type crystal structure; however, their relative crystallinity varied from 20.08% to 31.43%. Chain length distribution analysis showed that the A/B ratio of Jing cai tian nuo 18 and Feng nuo 168 was similar to that of CAWR. Peak viscosities of corn starches were higher than that of CAWR, except for Feng nuo 10, while their setback values were lower than that of CAWR. Except for Feng nuo 10, the paste transparency of corn starches was higher than that of CAWR (10.77%), especially for Jing cai tian nuo 18 (up to 24%). In summary, Jing cai tian nuo 18 and Feng nuo 168 are promising candidates to replace CAWR in developing various rice-based products.

Effects of Salt Stress on Grain Quality and Starch Properties of High-Quality Rice Cultivars

In recent days, there has been a noticeable surge in demand for high-quality rice. However, the influences of salinity on the quality and starch properties of high-quality rice remain unclear. Three high-quality rice cultivars (Nanjing 9108, Nanjing 5055, and Nanjing 46) were studied to investigate the responses of grain quality to salt stress. There were three treatments, including a control zero salt level (0 g·kg−1, CK), and two salt levels of 0.1 g·kg−1 (0.1% salt stress, T1) and 0.2 g·kg−1 (0.2% salt stress, T2). The study involved the assessment of the appearance, milling, cooking, and eating qualities of rice. We also conducted an analysis of pasting properties, an evaluation of starch thermal properties, and an examination of the fine structure of amylopectin. The findings suggest that as the level of salt stress increases, the yield of rice gradually declines, which is primarily due to a significant reduction in the total spikelet number and the ratio of filled grains. Compared with CK treatment, the appearance and milling quality of rice were significantly improved within the T1 treatment. In addition, the protein concentration and amylose concentration were significantly decreased, the gel consistency was significantly increased, and the cooking and eating qualities were improved. In terms of starch properties, the peak viscosity, breakdown value, infrared ratio (1022/995), and short-chain-length amylopectin ratio increased significantly, while the setback value, pasting temperature, gelatinization enthalpy, relative crystallinity, and infrared ratio (1045/1022) decreased significantly. When comparing T2 with CK, the appearance quality and cooking and eating quality had deteriorated, and the milling quality was improved. The changes in the structural and physicochemical properties of starch were opposite to those in the comparison between the T1 treatment and the CK group. Accordingly, we propose that moderate salt stress has the potential to enhance rice quality, even though there may be a slight decrease in yield. This indicates that it is feasible to cultivate high-quality rice in saline–alkali beach areas.

Genome-Wide Association Study of Cooked Rice Textural Attributes and Starch Physicochemical Properties in indica Rice

Rice cooking and eating qualities (CEQ) are mainly determined by cooked rice textural parameters and starch physicochemical properties. However, the genetic bases of grain texture and starch properties in rice have not been fully understood. We conducted a genome-wide association study for apparent amylose content (AAC), starch pasting viscosities, and cooked rice textural parameters using 279 indica rice accessions from the 3 000 Rice Genome Project. We identified 26 QTLs in the whole population and detected single nucleotide polymorphisms (SNPs) with the lowest P-value at the Waxy (Wx) locus for all traits except pasting temperature and cohesiveness. Additionally, we detected significant SNPs at the SUBSTANDARD STARCH GRAIN6 (SSG6) locus for AAC, setback (SB), hardness, adhesiveness, chewiness (CHEW), gumminess (GUM), and resilience. We subsequently divided the population using a SNP adjacent to the Waxy locus, and identified 23 QTLs and 12 QTLs in two sub-panels, WxT and WxA, respectively. In these sub-panels, SSG6 was also identified to be associated with pasting parameters, including peak viscosity, hot paste viscosity, cold paste viscosity, and consistency viscosity. Furthermore, a candidate gene encoding monosaccharide transporter 5 (OsMST5) was identified to be associated with AAC, breakdown, SB, CHEW, and GUM. In total, 39 QTLs were co-localized with known genes or previously reported QTLs. These identified genes and QTLs provide valuable information for genetic manipulation to improve rice CEQ.

Functionalization Methods of Starch and Its Derivatives: From Old Limitations to New Possibilities.

It has long been known that starch as a raw material is of strategic importance for meeting primarily the nutritional needs of people around the world. Year by year, the demand not only for traditional but also for functional food based on starch and its derivatives is growing. Problems with the availability of petrochemical raw materials, as well as environmental problems with the recycling of post-production waste, make non-food industries also increasingly interested in this biopolymer. Its supporters will point out countless advantages such as wide availability, renewability, and biodegradability. Opponents, in turn, will argue that they will not balance the problems with its processing and storage and poor functional properties. Hence, the race to find new methods to improve starch properties towards multifunctionality is still ongoing. For these reasons, in the presented review, referring to the structure and physicochemical properties of starch, attempts were made to highlight not only the current limitations in its processing but also new possibilities. Attention was paid to progress in the non-selective and selective functionalization of starch to obtain materials with the greatest application potential in the food (resistant starch, dextrins, and maltodextrins) and/or in the non-food industries (hydrophobic and oxidized starch).

Correlation between in vitro starch digestibility and starch structure/physicochemical properties in rice

Natural resistant starch (RS) in rice provides human health benefits, and its concentration in rice is influenced by the structure and physicochemical properties of starch. The native starch structures and physicochemical properties of three rice varieties, QR, BR58, and BR50, and their relationships to in vitro digestibility were studied. The starch granules in all three varieties were irregular or polyhedral in shape. There were a few oval granules and a few pinhole structures in QR, no oval granules but a higher number of pinholes in BR58, and no oval granules and pinholes in BR50. QR is a low-amylose (13.8 %), low-RS (0.2 %) variety. BR58 is a low-amylose (15.3 %), high-RS (6.5 %) variety. BR50 is a high-amylose (26.7 %), high-RS (8.3 %) variety. All three starches exhibited typical A-type diffraction patterns. Starch molecular weight, chain length distribution, starch branching degree, pasting capabilities, and thermal properties differed considerably between the rice starches. The RS contents of the rice starch varieties were positively correlated with AAC, Mw/Mn, Mz/Mn, peak 3, B, PTime, and Tp and negatively correlated with Mn, peak 2, DB, PV, and BD, according to Pearson's correlation analysis. These findings may be helpful for the breeding and development of high-RS rice varieties.

Rice Grains from Slightly Saline Field Exhibited Unchanged Starch Physicochemical Properties but Enhanced Nutritional Values

This study aims to investigate grain quality and nutritional values of rice (Pokkali, a salt-tolerant cultivar; RD73, a new cultivar improved from KDML105 introgressed with Saltol QTL from Pokkali, and KDML105, a moderately salt-susceptible cultivar) grown under non-saline (0.04–0.87 dS/m) and slightly saline (1.08–4.83 dS/m) field conditions. The results revealed that salinity caused significant reduction in grain size but significant increments in reducing sugar and total protein contents in the grains. Nevertheless, the amounts of starch in the grains of KDML105 and Pokkali rice genotypes were unaffected by the stress. The starch granule size distribution was also unaffected by salinity. Interestingly, only starch from Pokkali was significantly diminished in amylose content, from 19.18% to 16.99%. Accordingly, parameters relating to starch gelatinization, retrogradation, and pasting properties of KDML105 and RD73 were unaffected by salinity; only Pokkali showed a significant increase in percentage of retrogradation along with a significant reduction in gelatinization enthalpy. In the saline field, total phenolic content and antioxidant capacity in the grains of all rice cultivars tended to increase, particularly in Pokkali. On average, essential element contents in grains from the saline-treated plants showed a 33%, 32%, 32%, 22%, 20%, 11%, and 10% increase in total P, N, K, Mg, Zn, Fe, and Ca content, respectively. Interestingly, total Fe content exhibited the greatest percentage of increments in KDML105 (187%). Taken together, cultivation of rice in the slightly saline field did not alter its eating and cooking qualities, while enhanced some nutritional properties such as proteins, minerals, and secondary metabolites like phenolic compounds.

Grain quality deterioration of hybrid rice is associated with alterations in physicochemical and structural properties of starch under saline conditions

AbstractSaline water could affect the structural and physicochemical properties of starch and rice (Oryza sativa L.) quality. In the present study, two high‐quality hybrid rice varieties, that is, Y Liangyou 957 (YLY957) and Jing Liangyou 534 (JLY534), were grown in a mixture of underground and sea water having 0, 5, and 11 dS m−1 electrical conductivity (EC). The mixtures of water were applied at active tillering stage. Results showed that the application of saline water decreased the total starch and amylose content and increased the protein content, thus reduced the taste value. In addition, the B2 chain content in amylopectin increased by 3.83%–5.30% under the application of saline water, leading to delayed pasting and higher gelatinization temperature. Application of saline water also altered the relative crystallinity, which affected the surface smoothness of starch granules (increased the percentage of small and medium starch granules [d &lt; 10 μm]). Overall, the results indicated that salt stress during the whole growth period changed the physicochemical properties and structure of starch and reduced the eating and cooking qualities.

Chemical composition, structural features, and physicochemical properties of starches from Thai indigenous rice varieties

ABSTRACT Thai indigenous rice varieties provide valuable genetic resources due to their environmental resilience, but it is yet to be elucidated whether their endosperm starches are suitable for whole grain consumption or industrial applications. Here, 19 Thai indigenous rice starches were explored for compositional, structural, and physicochemical characteristics. Grain reducing sugar, protein, and amylose contents significantly differed among genotypes. Their starches were categorized as waxy, very low-, and low-amylose starches. The varieties with low-amylose starches displayed higher amylose content but lower crystallinity than the varieties with waxy and very low-amylose starches. The largest median starch granule size (d(0.5)) was also observed in most varieties with low-amylose starches. The starch compositional and structural variations contributed to substantial differences in starch physicochemical properties among these genotypes. The partial least squares discriminant analysis revealed that amylose content, setback, swelling power, reducing sugar, C- and A-type granules, d(0.5), and final viscosity could discriminate the low-amylose starches from the waxy and very low-amylose starches. Notably, correlation analyses revealed that amylose content was the most crucial factor determining starch physicochemical properties of these varieties. Starch compositional, structural, and physicochemical variations among the indigenous rice varieties can be adopted as alternative industrial raw materials and as genetic resources for future breeding programs.