Standing Surface Acoustic Waves Research Articles

Optimization analysis of the particle focusing and separation parameters of a sheathless microfluidic device using standing surface acoustic waves

Flow-based particle separation usually requires a sheath flow for particle manipulation. Sheath fluid is a specialized buffer solution that directs the alignment of particles or cells into the center of the stream. By utilizing sheath flow, the particles or cells can be focused on the middle line of the microchannel, where they can be individually analyzed. However, the method requires an additional design for creating a suitable sheath flow. Purity and separation efficiency may also be influenced by the sheath flow. In this study, we present a sheathless device for particle focusing and separation using standing surface acoustic waves (SSAWs). The device comprises two regions: the focusing and separation regions. In the focusing region, particles in a continuous flow are aligned in the middle of the microchannel by SSAWs; in the separation region, tilted-angle SSAW-based particle separation is used to control particle migration. Varying particle sizes were focused in the focusing region and then separated in the separation region in the sheathless device. Experiments and simulations were also utilized to optimize a sheathless device. 10 and 20 μm particle focusing and separation were conducted in a sheathless device for the first time. We demonstrate that the separation of particles with a diameter of 10 and 20 μm has 90.8 ± 1.75% and 99.5 ± 0.8% separation efficiency, and 98 ± 3.4 and 97.9 ± 0.9% purity. Compared with other focusing and separation technologies, our device can also provide high purity, high separation efficiency, and high device density.

Dynamic Mechanical Modulation of WS2 Monolayer by Standing Surface Acoustic Waves

Dynamic Mechanical Modulation of WS₂ Monolayer by Standing Surface Acoustic Waves

Acousto-dielectric tweezers enable independent manipulation of multiple particles.

Acoustic tweezers have gained substantial interest in biology, engineering, and materials science for their label-free, precise, contactless, and programmable manipulation of small objects. However, acoustic tweezers cannot independently manipulate multiple microparticles simultaneously. This study introduces acousto-dielectric tweezers capable of independently manipulating multiple microparticles and precise control over intercellular distances and cyclical cell pairing and separation for detailed cell-cell interaction analysis. Our acousto-dielectric tweezers leverage the competition between acoustic radiation forces, generated by standing surface acoustic waves (SAWs), and dielectrophoretic (DEP) forces, induced by gradient electric fields. Modulating these fields allows for the precise positioning of individual microparticles at points where acoustic radiation and DEP forces are in equilibrium. This mechanism enables the simultaneous movement of multiple microparticles along specified paths as well as cyclical cell pairing and separation. We anticipate our acousto-dielectric tweezers to have enormous potential in colloidal assembly, cell-cell interaction studies, disease diagnostics, and tissue engineering.

Formation of cell spheroids using Standing Surface Acoustic Wave (SSAW).

3D bioprinting becomes one of the popular approaches in the tissue engineering. In this emerging application, bioink is crucial for fabrication and functionality of constructed tissue. The use of cell spheroids as bioink can enhance the cell-cell interaction and subsequently the growth and differentiation of cells in the 3D printed construct with the minimum amount of other biomaterials. However, the conventional methods of preparing the cell spheroids have several limitations, such as long culture time, low-throughput, and medium modification. In this study, the formation of cell spheroids by SSAW was evaluated both numerically and experimentally in order to overcome the aforementioned limitations. The effects of excitation frequencies on the cell accumulation time, diameter of the formed cell spheroids, and subsequently, the growth and viability of cell spheroids in the culture medium over time were studied. Using the high-frequency (23.8 MHz) excitation, cell accumulation time to the pressure nodes could be reduced in comparison to that of the low-frequency (10.4 MHz) excitation, but in a smaller spheroid size. SSAW excitation at both frequencies does not affect the cell viability up to 7 days, > 90% with no statistical difference compared with the control group. In summary, SSAW can effectively prepare the cell spheroids as bioink for the future 3D bioprinting and various biotechnology applications (e.g., pharmaceutical drug screening and tissue engineering).

Volumetric Measurement Of The Acoustically Induced Fluid Flow In A Micro Chamber With A Two-Dimensional Standing Surface Acoustic Wave Field

The non-invasive, contactless and label-free trapping and patterning of individual cells with acoustic tweezers is a key technology to reliably analyze single cells and cell-cell interactions in biological applications. By using two-dimensional standing surface acoustic waves (2DsSAW), the precise manipulation of the cells in a micro chamber is primarily governed by the acoustic radiation force, which acts directly on the cells due to scattering effects of the acoustic waves. However, a fluid flow of three-dimensional nature is concurrently induced acoustically, which additionally influences the cell pattern by Stokes' drag. In this study, we shed light on the complex acoustically induced fluid flow forming in an acoustic tweezer by 3D3C velocity measurements using the astigmatism particle tracking velocimetry (APTV). Vortex structures above the antinodes of the 2DsSAW field were revealed. The fluid flow converge and diverge in the vicinity of the chamber bottom and ceiling, respectively. Hence, the fluid flow influences the stable trapping locations of cells or particles in different ways depending on their height position, which might explain the recently reported formation of various particle patterns at different height levels. Moreover, the experimental findings are used to validate a three-dimensional numerical model. The numerical model provides deep insights into the underlying acoustic fields responsible for the formation of the fluid flow and acoustic radiation force. By combining the experimental and numerical results, a profound understanding of the physical mechanisms for cell or particle trapping and patterning is established.

Acoustofluidic separation of bacteria from platelets using tilted-angle standing surface acoustic wave

Separation of microscale objects, such as cells and bacteria, is an essential sample preparation step in various microfluidic applications in microbiology, chemistry, biology, and biomedicine. Microfluidic separation of bacteria from blood cells is highly in demand to prevent or investigate bacterial infectious diseases. Unlike red and white blood cells, platelets have a similar size distribution to that of bacteria, which makes bacteria separation from platelets technically challenging. Most previous techniques for microfluidic separation rely on size as a separation marker. These size-based separation methods are not applicable to separation of the same or similar-sized samples. Here, we propose an acoustofluidic method using tilted-angle standing surface acoustic wave (taSSAW) for label-free separation of the microscale objects of the same or similar size based on compressibility. From the experimental investigation with polymethylmethacrylate, polystyrene, and polycaprolactone microparticles of the same size, we found that less compressible objects migrated further when exposed to the taSSAW field formed within a microchannel. Based on the findings, we demonstrated that Escherichia coli (E. coli) can be separated from platelets because the taSSAW-induced acoustic radiation force acting on comparatively less compressible E. coli was greater than that applied to the platelets. Fluorescence microscopy, scanning electron microscope, hemocytometry, sodium dodecyl sulfate polyacrylamide gel electrophoresis, and polymerase chain reaction were conducted to confirm the successful positive separation of bacteria from platelets with high purity of exceeding 96 % and recovery rate of exceeding 81 %.

Acoustic-assisted centrifugal microfluidics for particle/cell separation

The process of microparticle manipulation using acoustic waves within microfluidic devices is called acoustophoresis. This research focuses on a new approach for concentrating and categorizing microparticles using an integrated acoustic centrifugal microfluidic system with standing surface acoustic waves (SSAWs) and centrifugal forces. The study employs a rectangular microchannel with multiple inlets and outlets placed on an electrified lab-on-a-disc (eLOD) device subjected to SSAWs, guiding microparticles radially. Various physical parameters such as distance from the center of rotation, lateral displacement, tilting angle, microchannel dimensions, microparticle size, disc rotation speed, and applied voltage to the piezoelectric were simulated to assess microparticle focusing. The results indicate that adjusting lateral displacement and tilting angle can direct microparticles toward desired outlets. Enhanced focusing is achievable at low rotation speeds with higher applied voltage and narrower microchannel widths. The system's potential for classifying circulating tumor cells (CTCs) and white blood cells (WBCs) based on volume and density differences was also demonstrated. This acoustic eLOD device offers an efficient means for manipulating micro- and bioparticles.

Research on particle separation microfluidic chip based on standing surface acoustic wave

Microparticle and cell separation is a key process in the study of cell properties, clinical diagnosis and disease treatment. In this paper, a particle separation method based on the combination of surface acoustic wave and microfluidic technology is proposed, which uses standing surface acoustic wave to achieve the separating of polystyrene microparticles of different sizes twice in a continuous flow. Through numerical simulation of the device model and particle trajectory simulation, the optimum particle separation parameters were determined. The particle separation microfluidic chip has successfully realized the particle separation. The separation yield of 5 μm particles is about 92.1%. The separation rate of 1 μm particles is about 83.3%.

Harnessing a Vibroacoustic Mode for Enabling Smart Functions on Surface Acoustic Wave Devices ‐ Application to Icing Monitoring and Deicing

AbstractMicroacoustic wave devices are essential components in the radio frequency (RF) electronics and microelectromechanical systems (MEMS) industry with increasing impact in various sensing and actuation applications. Reliable and smart operation of acoustic wave devices at low costs will cause a crucial advancement. Herein, this study presents the enablement of temperature and mechanical sensing capabilities in a Rayleigh‐mode standing surface acoustic wave (sSAW) chip device by harnessing an acoustic shear‐thickness dominant wave (SD) using the same set of electrodes. Most importantly, this mode is excited by switching the polarity of the sSAW transducer electrodes by simple electronics, allowing for direct and inexpensive compatibility with an existing setup. The method in the emergent topic of surface de‐icing is validated by continuously monitoring temperature and liquid–solid water phase changes using the SD mode, and on‐demand Rayleigh‐wave deicing with a negligible energy cost. The flexibility for adapting the system to different scenarios, and loads and the potential for scalability opens the path to impact in lab‐on‐a‐chip, internet of things (IoT) technology, and sectors requiring autonomous acoustic wave actuators.

Investigation on submicron particle separation and deflection using tilted-angle standing surface acoustic wave microfluidics

With the development of in vitro diagnostics, extracting submicron scale particles from mixed body fluids samples is crucial. In recent years, microfluidic separation has attracted much attention due to its high efficiency, label-free, and inexpensive nature. Among the microfluidic-based separation, the separation based on ultrasonic standing waves has gradually become a powerful tool. A microfluid environment containing a tilted-angle ultrasonic standing surface acoustic wave (taSSAW) field has been widely adapted and designed to separate submicron particles for biochemical applications. This paper investigated submicron particle defection in microfluidics using taSSAWs analytically. Particles with 0.1–1 μm diameters were analyzed under acoustic pressure, flow rate, tilted angle, and SSAW frequency. According to different acoustic radiation forces acting on the particles, the motion of large-diameter particles was more likely to deflect to the direction of the nodal lines. Decreasing the input flow rate or increasing acoustic pressure and acoustic wave frequency can improve particle deflection. The tilted angle can be optimized by analyzing the simulation results. Based on the simulation analysis, we experimentally showed the separation of polystyrene microspheres (100 nm) from the mixed particles and exosomes (30–150 nm) from human plasma. This research results can provide a certain reference for the practical design of bioparticle separation utilizing acoustofluidic devices.

Surface acoustic wave digital microfluidics with surface wettability gradient.

This paper reports a digital microfluidic technology that combines surface wettability gradient and surface acoustic waves. The technology enables selection of the driven object, facilitating reactions among multiple droplets and improving the precision of droplet control. Octagonal patterns with a wetting gradient and orthogonally distributed interdigital transducers were created on the surface of a LiNbO3 wafer by photolithography. Leveraging the propagation characteristics of surface acoustic waves on different wetting models, the latter serve as a switch for microfluidic motion, successfully achieving selection of the driven object and demonstrating sequential reactions among multiple droplets. Also, under the excitation of standing surface acoustic waves, droplets on the wetting gradient surface move slightly in the direction of wetting gradient descent, significantly enhancing the positional accuracy of the droplets to the micrometer level. With the advantages of surface acoustic wave digital microfluidics, this technology addresses the challenges of multi-droplet digital manipulation and improved droplet positional accuracy.

Sensitivity of acoustofluidic particle manipulation to microchannel height in standing surface acoustic wave-based microfluidic devices

In this paper, the flow and particle trajectories, induced by standing surface acoustic waves (SSAWs) in a poly-dimethylsiloxane microchannel, are investigated by establishing a two-dimensional cross-sectional model with the finite element method and improved boundary conditions. Extensive parametric studies are conducted regarding the channel height, ranging from 0.2 to 4.0 times the spacing of the repetitive vertical interference pattern, to investigate its influences on the flow field and microparticle aggregation. The first-order flow field is found to be related to the channel height, exhibiting a periodic spatial distribution and oscillatory variation in its amplitude as the height changes. We theoretically analyze the propagation mechanism of the acoustic waves in the vertical direction and thus determine the periodicity of the wave interference pattern. Furthermore, we find that the speed of the particle aggregation is a function of the channel height, so the channel height can be optimized to maximize the strength of the first-order flow field and thus minimize the time of particle aggregation. The optimum heights can reduce the aggregation time by up to 76%. In addition, the acoustophoretic motions of microparticles exhibit a spatially dependent pattern when the channel height becomes larger than a quarter of the wavelength of the SAW, which can be explained by the change in the ratio between the radiation force and the streaming drag force from position to position. Our findings provide guidelines to the design and optimization of SSAW-based acoustofluidic devices.

On the behavior of prolate spheroids in a standing surface acoustic wave field

The active manipulation of particle and cell trajectories in fluids by high-frequency standing surface acoustic waves (sSAW) allows to separate particles and cells systematically depending on their size and acoustic contrast. However, process technologies and biomedical applications usually operate with non-spherical particles, for which the prediction of acoustic forces is highly challenging and remains a subject of ongoing research. In this study, the dynamical behavior of prolate spheroids exposed to a three-dimensional acoustic field with multiple pressure nodes along the channel width is examined. Optical measurements reveal an alignment of the particles orthogonal to the pressure nodes of the sSAW, which has not been reported in literature so far. The dynamical behavior of the particles is analyzed under controlled initial conditions for various motion patterns by imposing a phase shift on the sSAW. To gain detailed understanding of the particle dynamics, a three-dimensional numerical model is developed to predict the acoustic force and torque acting on a prolate spheroid. Considering the acoustically induced streaming around the particle, the numerical results are in excellent agreement with experimental findings. Using the proposed numerical model, a dependence of the acoustic force on the particle shape is found in relation to the acoustic impedance of the channel ceiling. Hence, the numerical model presented herein promises high progress for the design of separation devices utilizing sSAW, exploiting an additional separation criterion based on the particle shape.

A Simulated Investigation of Lithium Niobate Orientation Effects on Standing Acoustic Waves.

The integration of high-frequency acoustic waves with microfluidics has been gaining popularity as a method of separating cells/particles. A standing surface acoustic wave (sSAW) device produces constructive interference of the stationary waves, demonstrating an increase in cell separating efficiency without damaging/altering the cell structure. The performance of an sSAW device depends on the applied input signal, design of the IDT, and piezoelectric properties of the substrate. This work analyzes the characteristics of a validated 3D finite element model (FEM) of LiNbO3 and the effect on the displacement components of the mechanical waves under the influence of sSAWs by considering XY-, YX-, and 1280 YX-cut LiNbO3 with varying electrode length design. We demonstrated that device performance can be enhanced by the interference of multiple waves under a combination of input signals. The results suggest that 1280 YX-cut LiNbO3 is suitable for generating higher-amplitude out-of-plane waves which can improve the effectiveness of acoustofluidics-based cell separation. Additionally, the findings showed that the length of the electrode impacts the formation of the wavefront significantly.

Acoustofluidic Engineering of Functional Vessel-on-a-Chip.

Construction of in vitro vascular models is of great significance to various biomedical research, such as pharmacokinetics and hemodynamics, and thus is an important direction in the tissue engineering field. In this work, a standing surface acoustic wave field was constructed to spatially arrange suspended endothelial cells into a designated acoustofluidic pattern. The cell patterning was maintained after the acoustic field was withdrawn within the solidified hydrogel. Then, interstitial flow was provided to activate vessel tube formation. In this way, a functional vessel network with specific vessel geometry was engineered on-chip. Vascular function, including perfusability and vascular barrier function, was characterized by microbead loading and dextran diffusion, respectively. A computational atomistic simulation model was proposed to illustrate how solutes cross the vascular membrane lipid bilayer. The reported acoustofluidic methodology is capable of facile and reproducible fabrication of the functional vessel network with specific geometry and high resolution. It is promising to facilitate the development of both fundamental research and regenerative therapy.

Surface acoustic wave-tuned plasmonic resonances in liquid crystal-covered gold nanostructures

In this work, we propose an acoustically tunable plasmonic device based on liquid crystal (LC)-covered gold nanostructures. By utilizing the standing surface acoustic waves (SSAWs) to realign LC molecules, one can effectively tune the effective refractive index of LCs, and subsequently tune localized surface plasmon resonances (LSPRs) of the gold nanostructures. A 15 nm blue shift of the LSPR peak with the driving voltage of 400 mVpp is experimentally observed. Upon removal of the applied SSAWs, the LC molecules can return to their original orientation, and so does the LSPR peak. Besides the excellent reversibility, this active plasmonic device also features low power consumption and easy integration, which could find many potential applications including switches, modulators, and couplers.

Numerical investigation of acoustic streaming vortex and operating parameters in curved microchannel: driven by standing surface acoustic wave

Numerical investigation of acoustic streaming vortex and operating parameters in curved microchannel: driven by standing surface acoustic wave

Surface Acoustic Wave-Based Microfluidic Device for Microparticles Manipulation: Effects of Microchannel Elasticity on the Device Performance.

Size sorting, line focusing, and isolation of microparticles or cells are fundamental ingredients in the improvement of disease diagnostic tools adopted in biology and biomedicine. Microfluidic devices are exploited as a solution to transport and manipulate (bio)particles via a liquid flow. Use of acoustic waves traveling through the fluid provides non-contact solutions to the handling goal, by exploiting the acoustophoretic phenomenon. In this paper, a finite element model of a microfluidic surface acoustic wave-based device for the manipulation of microparticles is reported. Counter-propagating waves are designed to interfere inside a PDMS microchannel and generate a standing surface acoustic wave which is transmitted to the fluid as a standing pressure field. A model of the cross-section of the device is considered to perform a sensitivity analysis of such a standing pressure field to uncertainties related to the geometry of the microchannel, especially in terms of thickness and width of the fluid domain. To also assess the effects caused by possible secondary waves traveling in the microchannel, the PDMS is modeled as an elastic solid material. Remarkable effects and possible issues in microparticle actuation, as related to the size of the microchannel, are discussed by way of exemplary results.

Acoustofluidic patterning in glass capillaries using travelling acoustic waves based on thin film flexible platform

Surface acoustic wave (SAW) technology has been widely used to manipulate microparticles and biological species, based on acoustic radiation force (ARF) and drag force induced by acoustic streaming, either by standing SAWs (SSAWs) or travelling SAWs (TSAWs). These acoustofluidic patterning functions can be achieved within a polymer chamber or a glass capillary with various cross-sections positioned along the wave propagating paths. In this paper, we demonstrated that microparticles can be aligned, patterned, and concentrated within both circular and rectangular glass capillaries using TSAWs based on a piezoelectric thin film acoustic wave platform. The glass capillary was placed at different angles along with the interdigital transducer directions. We systematically investigated effects of tilting angles and wave characteristics using numerical simulations in both circular and square shaped capillaries, and the patterning mechanisms were discussed and compared with those agitated under the SSAWs. We then experimentally verified the particle patterns within different glass capillaries using thin film ZnO SAW devices on aluminum (Al) sheets. Results show that the propagating SAWs can generate acoustic pressures and patterns in the fluid due to the diffractive effects, drag forces and ARF, as functions of the SAW device’s resonant frequency and tilting angle. We demonstrated potential applications using this multiplexing, integrated, and flexible thin film-based platform, including patterning particles (1) inside multiple and successively positioned circular tubes; (2) inside a solidified hydrogel in the glass capillary; and (3) by wrapping a flexible ZnO/Al SAW device around the glass capillary.

High-temperature characterization of interdigitated transducers on gallium arsenide and surface acoustic wave analysis via interdigitated transducer modeling

Interdigitated transducer devices may provide an advantageous platform to study stress-enhanced interfacial phenomena at elevated temperatures, and an appropriate device design requires a thorough understanding of temperature-dependent material properties. In this study, the scattering parameter response for a surface acoustic wave resonator is simulated using a frequency-domain finite element method from 20 to 177 °C. Experimental device measurements are taken for the interdigitated transducer device fabricated on semi-insulating GaAs 100 oriented in the 110 direction, and the results are in good agreement with the simulation. Surface acoustic wave analysis provides the magnitude of bulk stress values and surface displacement over the experimental temperature range produced by a standing surface acoustic wave. The computational analysis combined with experimental verification suggests that such devices, when optimized for the maximum magnitude, can produce strain levels that could influence chemical potential associated with crystalline growth, atomic diffusion, and catalytic reactions. The modeling results demonstrate an interdigitated transducer's potential as an experimental platform to study the impact of strain on temperature-sensitive surface and bulk phenomena in piezoelectric materials.