Standard Ecotoxicity Tests Research Articles

Transcriptome analysis reveals limited toxic effects of the UV-filter benzophenone-3 (BP-3) on the hermatypic coral Acropora tenuis and its symbiotic dinoflagellates

This study aimed to investigate the toxic and transcriptomic effects of the ultraviolet filter benzophenone-3 (BP-3) on Acropora tenuis and its symbiotic dinoflagellates while using acetone as a solvent. Seven-day exposure to 50 and 500 μg/L, which is higher than most BP-3 records from coastal waters, did not affect coral colour or dinoflagellate photosynthesis. Differentially expressed genes (DEGs) between seawater and solvent controls were <20 in both corals and dinoflagellates. Eleven coral DEGs were detected after treatment with 50 μg/L BP-3. Fourteen coral DEGs, including several fluorescent protein genes, were detected after treatment with 500 μg/L BP-3. In contrast, no dinoflagellate DEGs were detected in the BP-3 treatment group. These results suggest that the effects of 50–500 μg/L BP-3 on adult A. tenuis and its dinoflagellates are limited. Our experimental methods with lower acetone toxicity provide a basis for establishing standard ecotoxicity tests for corals.

Association between heavy metal uptake and growth and reproduction in the anecic earthworm, Alma nilotica (Grube 1855).

Elevated heavy metal concentrations in soils are a cause for concern as they are hazardous to soil organisms including earthworms which are considered as ecosystem engineers. Current ecotoxicity tests predominantly use temperate earthworm species, and thus there is the need to include a broader genera of native species to improve ecological risk assessment. Alma nilotica, is a tropical anecic earthworm species that survives well under laboratory conditions and has potential for use in ecotoxicology testing but lacks published toxicity data for important pollutants. Growth and reproduction bioassays were carried out with A. nilotica to determine the relationship between the concentrations of Cu, Zn, Pb and Cr in spiked soils and their bioaccumulation and toxic effects. Positive linear relationships were found between soil-metal and internal earthworm-metal concentrations. Cu did not inhibit growth up to 35 days of exposure but became toxic with longer exposure duration. Zn was not regulated by A. nilotica although it is an essential metal that is well regulated by Eisenia sp. commonly used in standard ecotoxicity tests, showing differences in metal regulation by earthworms of different ecological categories. Based on bioaccumulation factors (BAFs), growth inhibition and reproduction effects the metals were ranked in decreasing toxicity as Pb > Cr > Zn > Cu. The mean 20% Internal Effects Concentrations (IEC20s) for reproduction were 1.04, 2.9, 8.3 and 224.2 mg metal kg-1 earthworm for Pb, Cr, Zn and Cu respectively. These data can contribute to the improvement of metal risk assessment particularly in tropical contexts.

Nanostructured cellulose sponge engineered for marine environmental remediation: Eco-safety assessment of its leachate on sea urchin reproduction (Part A)

Nanostructured cellulose sponges (CNS) have been developed as eco-friendly and sustainable engineered materials for marine environmental remediation. Despite their functionality, sensitivity, efficiency and specificity have been proved, CNS application is still limited since their environmental safety (eco-safety) has not been completely assessed. In this study, CNS were allowed to leach in natural seawater simulating the remediation process condition and the eco-safety of CNS leachate on sea urchin reproduction has been assessed by carrying out a multi-response integrated approach, combining standardized ecotoxicity tests, innovative bioassays and gamete quality assessment. Overall, the ecotoxicity data indicate that CNS leachate affects gamete quality, gamete fertilisation competence, and embryo development probably associated with the release of chemical additives used during the synthesis process. However, in the framework of the eco-design approach, consecutive leaching treatments and conditioning of CNS in seawater open the route for a new safety protocol successfully solving the ecotoxicity while maintaining CNS sorbent properties. A safe environmental application of the resulting conditioned CNS for seawater pollution remediation is envisaged.

Smokers’ behaviour and the toxicity of cigarette filters to aquatic life: a multidisciplinary study

Cigarettes are the most littered item in public spaces. Smokers who litter are leaving a trace of toxic waste that adds to the global plastic pollution due to harmful chemicals and semisynthetic microfibres that compose cigarette filters. Here we present a multidisciplinary study aiming to assess i) predictors of cigarette littering, and ii) the toxicity of semisynthetic filters to the freshwater invertebrate Chironomus riparius, including iii) the potential driver of toxicity. Unobtrusive observations of 597 smokers at public places were analysed using logistic regression, which showed that age (negatively) and group setting (positively) are personal predictors, and the number of present ashtrays (negatively) is a contextual predictor of cigarette littering. In addition, we assessed acute and chronic aquatic toxicity of cigarette filters in standardized ecotoxicity tests on several lethal and sublethal effects, using both smoked and unsmoked filters. Following 48-h exposure, concentrations of 2 filters/L from smoked and unsmoked filters caused 36–100% and 75–100% larvae immobility, respectively. We further demonstrated that cigarette filter fibres seem to add to the toxicity of filter leachates. Seven-day exposures that used either contaminated water or sediment (3 weeks leaching time, eq. 1 filter/L water and 1 filter/166.5 ml sediment) showed exposures via sediment caused more frequent and severe effects on the larvae than exposures via water. Larvae exposed to contaminated sediment (smoked and unsmoked filters) exhibited > 20% higher mortality, > 1.5-fold decrease in growth, and > 80% decreased development, compared to larvae in control conditions. Moreover, we found that cigarette filters have the potential to be teratogenic to freshwater invertebrates. Our results could be used to support litter prevention efforts, advisably via integrated educational campaigns. The campaigns could account for the societal and environmental complexity of cigarette littering by being tailored to the determined littering predictors and using ecotoxicity results as content.

The Influence of Oil-in-Water Preparations on the Toxicity of Crude Oil to Marine Invertebrates and Fish Following Short-Term Pulse and Continuous Exposures.

Following an oil spill, accurate assessments of the ecological risks of exposure to compounds within petroleum are required, as is knowledge regarding how those risks may change with the use of chemical dispersants. Laboratory toxicity tests are frequently used to assess these risks, but differences in the methods for preparation of oil-in-water solutions may confound interpretation, as may differences in exposure time to those solutions. In the present study, we used recently developed modifications of standardized ecotoxicity tests with copepods (Acartia sinjiensis), sea urchins (Heliocidaris tuberculata), and fish embryos (Seriola lalandi) to assess their response to crude oil solutions and assessed whether the oil-in-water preparation method changed the results. We created a water-accommodated fraction, a chemically enhanced water-accommodated fraction, and a high-energy water-accommodated fraction (HEWAF) using standard approaches using two different dispersants, Corexit 9500 and Slickgone NS. We found that toxicity was best related to total polycyclic aromatic hydrocarbon (TPAH) concentrations in solution, regardless of the preparation method used, and that the HEWAF was the most toxic because it dispersed the highest quantity of oil into solution. The TPAH composition in water did not vary appreciably with different preparation methods. For copepods and sea urchins, we also found that at least some of the toxic response could be attributed to the chemical oil dispersant. We did not observe the characteristic cardiac deformities that have been previously reported in fish embryos, most likely due to the use of unweathered oil, and, as a consequence, the high proportion of naphthalenes relative to cardiotoxic polycyclic aromatic hydrocarbon in the overall composition. The present study highlights the need to characterize both the TPAH composition and concentration in test solutions when assessing oil toxicity. Environ Toxicol Chem 2022;41:2580-2594. © 2022 SETAC.

UV filters and their impact on marine life: state of the science, data gaps, and next steps.

Sunscreens containing broad-spectrum ultraviolet (UV) filters play an essential role in protecting the skin against the damage induced by sun overexposure. However, the widespread use of sunscreens and other personal care products containing these filters has led to these compounds being widely detected in the environment and being identified as emerging pollutants in marine waters. Concerns raised by laboratory studies investigating the potential impact of UV filters on coral communities have already led to bans on the use of some sunscreens in a few tourist hotspots. Although UV filter pollution may be just one of the many environmental factors impacting coral health worldwide, the media attention surrounding these studies and the legislative changes may lead patients to question dermatologists about the environmental safety of some sunscreen products. This review provides an overview of current knowledge on the impact of UV filters on marine ecosystems, concentrating on recent studies examining the effects of commonly used filters on organisms at low trophic levels and of how alternative approaches, such as metabolomics, can be used to further assess UV filter ecotoxicity. Current gaps in our knowledge are also discussed, most notably the need to increase our understanding of the longer-term fate and behaviour of UV filters in the marine environment, develop more adapted standardized ecotoxicity tests for a wider range of marine species, and evaluate the impact of UV filters on the marine food web. We then discuss future perspectives for the development of new, more environmentally friendly, filters that may enable the use of the most toxic compounds to be reduced without compromising the effectiveness of sunscreen formulations. Finally, we consider how dermatologists play a key role in educating patients on the need for a balanced approach to sun exposure, sun protection, and conservation of the marine environment.

Assessment of the biological potential of diaryltriazene-derived triazene compounds

In the present study, novel, 1,3-diaryltriazene-derived triazene compounds were synthesized and tested. Triazenes are versatile and belong to a group of alkylating agents with interesting physicochemical properties and proven biological activities. This study describes the synthesis, molecular and crystalline structure, biological activity evaluation, and antifungal and antimicrobial potentials of 1,3-bis(X-methoxy-Y-nitrophenyl)triazenes [X = 2 and 5; Y = 4 and 5]. The antimicrobial and antifungal activities of the compounds were tested by evaluating the sensitivity of bacteria (American Type Culture Collection, ATCC) and clinical isolates to their solutions using standardized microbiological assays, cytotoxicity evaluation, and ecotoxicity tests. The antimicrobial potentials of triazenes were determined according to their minimum inhibitory concentrations (MICs); these compounds were active against gram-positive and gram-negative bacteria, with low MIC values. The most surprising result was obtained for T3 having the effective MIC of 9.937 µg/mL and antifungal activity against Candida albicans ATCC 90028, C. parapsilosis ATCC 22019, and C. tropicallis IC. To the best of our knowledge, this study is the first to report promising activities of triazene compounds against yeast and filamentous fungi. The results showed the potential utility of triazenes as agents affecting selected resistant bacterial and fungal strains.

Assessment of the relative sensitivity of the copepods Acartia tonsa and Acartia clausi exposed to sediment-derived elutriates from the Bagnoli-Coroglio industrial area

The sensitivity of the copepods Acartia tonsa, commonly used in standardized tests for environmental risk assessment and A. clausi, the dominant autochthonous congener species in the Mediterranean Sea, was assessed using sediment-derived elutriates from the industrial area of Bagnoli-Coroglio and nickel chloride as referent toxicant. Acute A. clausi naupliar immobilization test showed EC50 for elutriates E25, E56 and E84 of 23.3%, 80.5% and >100%, respectively, compared to 59.5%, 66.6% and >100% in A. tonsa. In the 7 day sublethal test, a reduction in A. clausi egg production rates was observed in all elutriates, but only in E56 for A. tonsa. Elutriate 56, which contained the highest amount of polycyclic aromatic hydrocarbons, also induced 70% mortality in A. clausi females. Although A. clausi was more sensitive than A. tonsa, the two species had convergent responses to the three elutriates, thus opening the venue for a potential use of A. clausi in standardized ecotoxicity tests.

Overcoming Challenges of Incorporating Higher Tier Data in Ecological Risk Assessments and Risk Management of Pesticides in the United States: Findings and Recommendations from the 2017 Workshop on Regulation and Innovation in Agriculture.

ABSTRACTPesticide regulation requires regulatory authorities to assess the potential ecological risk of pesticides submitted for registration, and most risk assessment schemes use a tiered testing and assessment approach. Standardized ecotoxicity tests, environmental fate studies, and exposure models are used at lower tiers and follow well‐defined methods for assessing risk. If a lower tier assessment indicates that the pesticide may pose an ecological risk, higher tier studies using more environmentally realistic conditions or assumptions can be performed to refine the risk assessment and inform risk management options. However, there is limited guidance in the United States on options to refine an assessment and how the data will be incorporated into the risk assessment and risk management processes. To overcome challenges to incorporation of higher tier data into ecological risk assessments and risk management of pesticides, a workshop was held in Raleigh, North Carolina. Attendees included representatives from the United States Environmental Protection Agency, United States Department of Agriculture, National Oceanic and Atmospheric Administration, universities, commodity groups, consultants, nonprofit organizations, and the crop protection industry. Key recommendations emphasized the need for 1) more effective, timely, open communication among registrants, risk assessors, and risk managers earlier in the registration process to identify specific protection goals, address areas of potential concern where higher tier studies or assessments may be required, and if a higher tier study is necessary that there is agreement on study design; 2) minimizing the complexity of study designs while retaining high value to the risk assessment and risk management process; 3) greater transparency regarding critical factors utilized in risk management decisions with clearly defined protection goals that are operational; and 4) retrospective analyses of success–failure learnings on the acceptability of higher tier studies to help inform registrants on how to improve the application of such studies to risk assessments and the risk management process. Integr Environ Assess Manag 2019;15:714–725. © 2019 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Monitoring the ecotoxicity of γ-Al2O3 and Ni/γ-Al2O3 nanomaterials by means of a battery of bioassays

The increasing application of nanoparticles (NPs) to a variety of new technologies has become a matter of concern due to the potential toxicity of these materials. Many questions about the fate of NPs in the environment and the subsequent impact on ecosystems need to be answered. The aim of this work was to evaluate the ecotoxicity of two alumina-based nanoceramics, γ-Al2O3 (NC) and Ni/ γ-Al2O3 (NiNC) by means of three different standardized tests: Biochemical Oxygen Demand (BOD5), bioassay with luminescent bacteria (Vibrio fischeri; Microtox), and bioassay on amphibian larvae (Rhinella arenarum) (AMPHITOX). BOD5 values of a very biodegradable mixture (glucose/glutamic acid) decreased with the addition of NiNC(43.8%) and NC (31.6%) with respect to control samples (52.9%). Microtox test results indicated that NiNC presents higher toxicity than NC, with EC50s values of 16.1% and 29.9% respectively; a reduced toxicity was observed, however, in presence of organic matter, thus obtaining EC50s of 37.8% and 19.4%. The results of AMPHITOX test showed a significant increase in the toxicity of both substances over time, the NiNC toxicity being greater than that of NC. The values of 96h-LC50 and 504h-LC50 determined for NiNC were 1.58 and 0.83mg/L, respectively, and 14.5 and 10.5mg/L for NC samples. Amphibian larvae exhibited collapsed cavities, edema, axial flexures, and behavioral alterations as hyperkinesia and reduced movements. These results evidence the vulnerability of wildlife to xenobiotics and the need to develop specific standardized ecotoxicity tests in order to help environmental sustainability and natural species conservation.

Temperature and food concentration have limited influence on the mixture toxicity of copper and Microcystis aeruginosa to Daphnia magna.

Standard ecotoxicity tests are conducted under constant and favorable experimental conditions. In natural communities, however, the toxicity of chemicals may be influenced by abiotic and biotic environmental factors. Firstly, the authors examined the influence of temperature and total food concentration on the nature of the combined effects of copper (Cu) and the cyanobacterium Microcystis aeruginosa to Daphnia magna (i.e., whether the combined effects deviated from noninteraction). Secondly, the authors investigated the relative influence of the percentage of M. aeruginosa in the diet, temperature, and total food concentration on chronic Cu toxicity to D. magna. The nature of the combined effects between Cu and M. aeruginosa (i.e., synergism according to the independent action reference model and noninteraction according to concentration addition reference model) was not affected by temperature and total food concentration. In line with other studies, the concentration addition reference model gave rise to more protective predictions of mixture toxicity than the independent action reference model, thus confirming the former model's suitability as a conservative scenario for evaluating mixture toxicity of Cu and M. aeruginosa under the temperature and food concentrations tested. Further, the 21-d median effective concentration for Cu based on reproduction varied between 20 μg/L and 100 μg/L, and the results indicate that the percentage of M. aeruginosa explained 76% of the variance in the Cu median effective concentration for reproduction, whereas the effects of temperature and total food were limited (together explaining 11% of the variance). The present study suggests that environmental risk assessment of Cu should consider specific situations where harmful M. aeruginosa blooms can co-occur with elevated Cu exposure.

The effects of acrylamide polyelectrolytes on aquatic organisms: Relating toxicity to chain architecture

Understanding the inherent toxicity of water-soluble synthetic polyelectrolytes is critical for adequate risk management as well as enhancing product design when biological activity is a key performance index (e.g. for application in biofouling bivalves’ control). The toxicity of two cationic acrylamide copolymers with different chain branching degree was evaluated. Standard ecotoxicity tests were conducted with microalgae and daphnids. The susceptibility of Corbicula fluminea, as a biofouling bivalve, was also evaluated. The effect of polyelectrolyte on the test media viscosity and the polymer chain size distributions under the experimental conditions were also examined. The susceptibility of the microalgae to both polymers was similar. As the complexity and size of the test organisms increased, differences in toxicity due to different chain architecture were noticeable. The more branched polymer was significantly less toxic to both daphnids and the bivalves, which could be linked to the distinctive features of its bimodal size chain distribution. This architecture resulted in both more compact globular molecules and the formation of aggregates, which reduce the polymer interaction with the biological surfaces. The results of this study promote the incorporation of environmental considerations in polyelectrolyte development and contribute to the design of improved solutions for controlling biofouling bivalves.

An in vitro crop plant ecotoxicity test for agricultural bioplastic constituents

Abstract Plastic mulches are widely used in agriculture to improve production, mainly in vegetable crops. Their main drawback is the generation of residues that are hard to manage. Therefore the substitution of traditional plastics by renewable and biodegradable polymers is an environmentally friendly improvement. However, compounds released during (bio)degradation of the mulches may remain in the soil. Consequently, standard ecotoxicity tests are required to ensure the biomaterials' ecosafety. Unfortunately, ecotoxicity tests for terrestrial plants, and specifically for the plant species frequently cultivated with mulches, are poorly developed. Furthermore, most of these tests report seedling emergence and early plant growth, but germination and plant growth have different requirements, and plant growth inhibition by compounds not affecting germination has been frequently reported. Other limitations of ecotoxicity tests are related to environmental variability, interactions of soils/substrates with the chemicals, and to the limited monitoring of plant development over time, especially for roots. The aim of this work has been to develop an in vitro controlled system for testing the ecotoxicity of plastic constituents putatively delivered to the soil during mulch biodegradation on crop plants. Germination and growth of lettuce and tomato were monitored over time in response to adipic, succinic and lactic acids, and to 1,4-butanediol, in concentrations 5–500 mg l−1. Although germination was not influenced by most treatments, significant effects were manifested later in plant development. The sensitivity of the system was higher than in standard short-term assays. Results in lettuce and tomato were not substantially different, but indicative of the need to test the precise species targeted. Overall, adipic acid inhibited growth, succinic acid had no effect, and butanediol enhanced growth to some extent. Lactic acid requires further investigation. We highlight the convenience of the system for monitoring root development; roots were more sensitive to the chemicals than shoots and leaves. Proline is shown as a potential marker for ecotoxicoxicity. The in vitro system is proposed as a simple and reliable method to test for ecotoxicity in terrestrial plants.

Sucralose Induces Biochemical Responses in Daphnia magna

The intense artificial sweetener sucralose has no bioconcentration properties, and no adverse acute toxic effects have been observed in standard ecotoxicity tests, suggesting negligible environmental risk. However, significant feeding and behavioural alterations have been reported in non-standard tests using aquatic crustaceans, indicating possible sublethal effects. We hypothesized that these effects are related to alterations in acetylcholinesterase (AChE) and oxidative status in the exposed animals and investigated changes in AChE and oxidative biomarkers (oxygen radical absorbing capacity, ORAC, and lipid peroxidation, TBARS) in the crustacean Daphnia magna exposed to sucralose (0.0001–5 mg L−1). The sucralose concentration was a significant positive predictor for ORAC, TBARS and AChE in the daphnids. Moreover, the AChE response was linked to both oxidative biomarkers, with positive and negative relationships for TBARS and ORAC, respectively. These joint responses support our hypothesis and suggest that exposure to sucralose may induce neurological and oxidative mechanisms with potentially important consequences for animal behaviour and physiology.

Highly time‐variable exposure to chemicals—toward an assessment strategy

Organisms in the environment experience fluctuating, pulsed, or intermittent exposure to pollutants. Accounting for effects of such exposures is an important challenge for environmental risk assessment, particularly given the simplified design of standard ecotoxicity tests. Dynamic simulation using toxicokinetic-toxicodynamic (TK-TD) models describes the processes that link exposure with effects in an organism and provides a basis for extrapolation to a range of exposure scenarios. In so doing, TK-TD modeling makes the risk assessment more robust and aids use and interpretation of experimental data. Toxicokinetic-toxicodynamic models are well-developed for predicting survival of individual organisms and are increasingly applied to sublethal endpoints. In the latter case particularly, linkage to individual-based models (IBMs) allows extrapolation to population level as well as accounting for differences in effects of toxicant exposure at different stages in the life cycle. Extrapolation between species remains an important constraint because there is currently no systematic understanding of species traits that cause differences in the relevant processes. Toxicokinetic-toxicodynamic models allow interrogation of exposure profiles to determine intrinsic toxicity potential rather than using absolute maximum concentrations or time-weighted averages as surrogates. A decision scheme is proposed to guide selection of risk assessment approaches using dose extrapolation based on Haber's Law, TK-TD models, and/or IBMs depending on the nature of toxic effect and timing in relation to life history.

Copper toxicity in soils under established vineyards in Europe: A survey

Copper (Cu) containing fungicides have been used for more than one century in Europe on agricultural soils, such as vineyard soils. Total Cu concentrations in such soils can exceed toxicological limits that are commonly derived using artificially spiked soils. This study surveyed Cu toxicity in vineyard soils with reference to soils spiked with CuCl2. Soil was collected in six established European vineyards. At each site, samples representing a Cu concentration gradient were collected. A control (uncontaminated) soil sampled nearby the vineyard was spiked with CuCl2. Toxicity was tested using standard ecotoxicity tests: two plant assays (Lycopersicon esculentum Miller (tomato) and Hordeum vulgare L. (barley) growth), one microbial assay (nitrification) and one invertebrate assay (Enchytraeus albidus reproduction). Maximal total Cu concentrations in the vineyard sites ranged 435–690mgCukg−1, well above the local background (23–105mgCukg−1). Toxicity in spiked soils (50% inhibition) was observed at added soil Cu concentrations from 190 to 1039mgCukg−1 (mean 540mgCukg−1) depending on the assay and the site. In contrast, significant adverse effects were only found for three bioassays in vineyard samples of one site and for two bioassays in another site. Biological responses in these cases were more importantly explained by other soil properties than soil Cu. Overall, no Cu toxicity to plants, microbial processes and invertebrates was observed in vineyard soil samples at Cu concentrations well above European Union limits protecting the soil ecosystem.

Temperature dependence of long-term cadmium toxicity in the zebrafish is not explained by liver oxidative stress: Evidence from transcript expression to physiology

Standard ecotoxicity tests are performed at species’ specific standard temperatures, but temperature is known to affect chemical toxicity. A temperature increase has been shown to increase cadmium toxicity in several aquatic species but information in fish is scarce. Based on literature we hypothesize that with increasing temperature, cadmium accumulation and oxidative stress increase, resulting in increased toxicity. In this study zebrafish acclimated to 12, 18, 26 (standard temperature) or 34°C for one month, were exposed to 5μM cadmium for 4 or 28 days at the respective acclimation temperature. Cadmium toxicity (mortality) increased with increasing temperature. PCA showed that the high mortality at 34°C was closely correlated to an increasing tissue cadmium accumulation with increasing temperature, but not to liver oxidative damage under the form of protein carbonyl content or lipid peroxidation (measured as malondialdehyde levels) or liver antioxidative potential. Instead, acclimation to 12°C induced the highest oxidative damage to liver proteins and lipids, and transcript levels of glucose-6P-dehydrogenase, 6P-gluconate-dehydrogenase and glutathione peroxidase were particularly good markers of cold-induced oxidative stress. At this low temperature there was no interaction with cadmium exposure and there was no sign of cadmium sensitivity. Contrastingly, the combined effect of high temperature and cadmium exposure on mortality proved synergistic. Therefore we conclude that interactions between temperature and cadmium toxicity increased with increasing temperature and that this probably played part in increasing cadmium sensitivity. Increased cadmium compartmentalization and protein carbonyl content in liver of zebrafish acclimated to the standard temperature of 26°C probably played part in increased sensitivity towards the same cadmium body burden compared to lower temperatures. On the one hand we recognize and this study even confirms the importance of applying standard temperatures in standard ecotoxicity tests to ensure inter-study comparability. On the other hand temperatures in the field may deviate from standard temperatures and accounting for deviating temperatures, which can alter chemical sensitivity, in regulation can improve environmental protection.

Methodological considerations for testing the ecotoxicity of carbon nanotubes and fullerenes: Review

The recent emergence of manufactured nanoparticles (NPs) that are released into the environment and lead to exposure in organisms has accelerated the need to determine NP toxicity. Techniques for measuring the toxicity of NPs (nanotoxicology) in ecological receptors (nanoecotoxicology) are in their infancy, however, and establishing standardized ecotoxicity tests for NPs are presently limited by several factors. These factors include the extent of NP characterization necessary (or possible) before, during, and after toxicity tests such that toxic effects can be related to physicochemical characteristics of NPs; determining uptake and distribution of NPs within exposed organisms (does uptake occur or are effects exerted at organism surfaces?); and determining the appropriate types of controls to incorporate into ecotoxicity tests with NPs. In this review, the authors focus on the important elements of measuring the ecotoxicity of carbon NPs (CNPs) and make recommendations for ecotoxicology testing that should enable more rigorous interpretations of collected data and interlaboratory comparisons. This review is intended to serve as a next step toward developing standardized tests that can be incorporated into a regulatory framework for CNPs.

Ecotoxicogenomics: Bridging the Gap between Genes and Populations

Ecotoxicogenomics might help solving open questions that cannot be answered by standard ecotoxicity tests currently used in environmental risk assessment. Changes in gene expression are claimed to serve potentially as early warning indicators for environmental effects and as sensitive and specific ecotoxicological end points. Ecotoxicogenomics focus on the lowest rather than the highest levels of biological organization. Our aim was to explore the links between gene expression responses and population level responses, both mechanistically (conceptual framework) and correlatively (Species Sensitivity Distribution). The effects of cadmium on aquatic species were compared for gene level responses (Lowest Observed Effect Concentrations) and individual level responses (median Lethal Concentrations, LC(50), and No Observed Effect Concentrations, NOEC). Responses in gene expression were on average four times above the NOEC and eleven times below the LC(50) values. Currently, use of gene expression changes as early warning indicators of environmental effects is not underpinned due to a lack of data. To confirm the sensitivity claimed by ecotoxicogenomics more testing at low concentrations is needed. From the conceptual framework, we conclude that for a mechanistic gene population link in risk management, research is required that includes at least one meaningful end point at each level of organization.

Studies On The Toxicological Effects Of Engineered Nanoparticles In Environment - A Review

This paper considers the standard ecotoxicity tests done so far for assessing the hazards of engineered nanoparticles and potential negative effects that engineered nanoparticles may have on environment. Research and development in nanotechnologies increase strongly and attract substantial funding, but environmental consequences of resulting materials and applications are poorly known. We prepared nanoparticles by continuous sonication and by ultra filtration. Artemia salina was differentiated to five life stages based on certain easily distinguished features and were exposed to different concentrations of Titanium Dioxide and Fullerene using 48 hours acute toxicity testing. Images of the particle solutions were recorded using TEM and the median lethal concentration was determined in each life stage. Exposure to sonicated nanoparticles shows varied mortalities in different stages of Artemia salina where as filtered solutions showed increasing mortality with increase in concentration. We conclude that uncontrolled and unobserved release of these nanoparticles either as byproducts or medical wastes, could have a large negative consequence on the aquatic and terrestrial organisms, particularly on the humans.