Standard Solid-phase Peptide Synthesis Research Articles

Mixed Stereochemistry Macrocycle Acts as a Helix-Stabilizing Peptide N-Cap.

Interactions between proteins and α-helical peptides have been the focus of drug discovery campaigns. However, the large interfaces formed between multiple turns of an α-helix and a binding protein represent a significant challenge to inhibitor discovery. Modified peptides featuring helix-stabilizing macrocycles have shown promise as inhibitors of these interactions. Here, we tested the ability of N-terminal to side-chain thioether-cyclized peptides to inhibit the α-helix binding protein Mcl-1, by screening a trillion-scale library. The enriched peptides were lariats featuring a small, four-amino-acid N-terminal macrocycle followed by a short linear sequence that resembled the natural α-helical Mcl-1 ligands. These "Heliats" (helical lariats) bound Mcl-1 with tens of nM affinity, and inhibited the interaction between Mcl-1 and a natural peptide ligand. Macrocyclization was found to stabilize α-helical structures and significantly contribute to affinity and potency. Yet, the 2nd and 3rd positions within the macrocycle were permissible to sequence variation, so that a minimal macrocyclic motif, of an N-acetylated d-phenylalanine at the 1st position thioether connected to a cysteine at the 4th, could be grafted into a range of peptides and stabilize helical conformations. We found that d-stereochemistry is more helix-stabilizing than l- at the 1st position in the motif, as the d-amino acid can utilize polyproline II torsional angles that allow for more optimal intrachain hydrogen bonding. This mixed stereochemistry macrocyclic N-cap is synthetically accessible, requiring only minor modifications to standard solid-phase peptide synthesis, and its compatibility with peptide screening can provide ready access to helix-focused peptide libraries for de novo inhibitor discovery.

Mechanistic insights on the antibacterial action of the kyotorphin peptide derivatives revealed by in vitro studies and Galleria mellonella proteomic analysis

ObjectivesThe selected kyotorphin derivatives were tested to improve their antimicrobial and antibiofilm activity. The antimicrobial screening of the KTP derivatives were ascertained in the representative strains of bacteria, including Streptococcus pneumoniae, Streptococcus pyogenes, Escherichia coli and Pseudomonas aeruginosa. MethodsKyotorphin derivatives, KTP-NH2, KTP–NH2–DL, IbKTP, IbKTP-NH2, MetKTP-DL, MetKTP-LD, were designed and synthesized to improve lipophilicity and resistance to enzymatic degradation. Peptides were synthesized by standard solution or solid-phase peptide synthesis and purified using RP-HPLC, which resulted in >95 % purity, and were fully characterized by mass spectrometry and 1H NMR. The minimum inhibitory concentrations (MIC) determined for bacterial strains were between 20 and 419 μM. The direct effect of IbKTP-NH2 on bacterial cells was imaged using scanning electron microscopy. The absence of toxicity, high survival after infection and an increase in the hemocytes count was evaluated by injections of derivatives in Galleria mellonella larvae. Proteomics analyses of G. mellonella hemolymph were performed to investigate the underlying mechanism of antibacterial activity of IbKTP-NH2 at MIC. ResultsIbKTP-NH2 induces morphological changes in bacterial cell, many differentially expressed proteins involved in DNA replication, synthesis of cell wall, and virulence were up-regulated after the treatment of G. mellonella with IbKTP-NH2. ConclusionWe suggest that this derivative, in addition to its physical activity on the bacterial membranes, can elicit a cellular and humoral immune response, therefore, it could be considered for biomedical applications.

Versatile Click Linker Enabling Native Peptide Release from Nanocarriers upon Redox Trigger.

Nanocarriers have shown their ability to extend the circulation time of drugs, enhance tumor uptake, and tune drug release. Therapeutic peptides are a class of drug compounds in which nanocarrier-mediated delivery can potentially improve their therapeutic index. To this end, there is an urgent need for orthogonal covalent linker chemistry facilitating the straightforward on-the-resin peptide generation, nanocarrier conjugation, as well as the triggered release of the peptide in its native state. Here, we present a copper-free clickable ring-strained alkyne linker conjugated to the N-terminus of oncolytic peptide LTX-315 via standard solid-phase peptide synthesis (SPPS). The linker contains (1) a recently developed seven-membered ring-strained alkyne, 3,3,6,6-tetramethylthiacycloheptyne sulfoximine (TMTHSI), (2) a disulfide bond, which is sensitive to the reducing cytosolic and tumor environment, and (3) a thiobenzyl carbamate spacer enabling release of the native peptide upon cleavage of the disulfide via 1,6-elimination. We demonstrate convenient "clicking" of the hydrophilic linker-peptide conjugate to preformed pegylated core-cross-linked polymeric micelles (CCPMs) of 50 nm containing azides in the hydrophobic core under aqueous conditions at room temperature resulting in a loading capacity of 8 mass % of peptide to polymer (56% loading efficiency). This entrapment of hydrophilic cargo into/to a cross-linked hydrophobic core is a new and counterintuitive approach for this class of nanocarriers. The release of LTX-315 from the CCPMs was investigated in vitro and rapid release upon exposure to glutathione (within minutes) followed by slower 1,6-elimination (within an hour) resulted in the formation of the native peptide. Finally, cytotoxicity of LTX CCPMs as well as uptake of sulfocyanine 5-loaded CCPMs was investigated by cell culture, demonstrating successful tumor cell killing at concentrations similar to that of the free peptide treatment.

Rapid, traceless and facile peptide cyclization enabled by tetrazine-thiol exchange.

Cyclic peptides offer many advantages compared to their linear counterparts, including prolonged stability within the biological environment and enhanced binding affinity. Typically, peptides are cyclized by forming an amide bond, either on-resin or in solution, through extensive use of orthogonal protecting groups or chemoselective ligation strategies, respectively. Here, we show that the chemoselective tetrazine-thiol exchange is a powerful tool for rapid in situ cyclization of peptides without the need for additional activation reagents or extensive protecting group reshuffling. The reaction between N-terminal sulfide-bearing unsymmetric tetrazines and internal cysteines occurs spontaneously within a mildly acidic environment (pH 6.5) and is of traceless nature. The rapidly available unsymmetric sulfide tetrazine building blocks can be incorporated on resin using standard solid-phase peptide synthesis protocols and are orthogonal to trifluoroacetic acid cleavage conditions. The cyclized peptides display high stability, even when incubated with a large excess of free thiols. Due to its traceless and mild nature, we expect that the tetrazine-thiol exchange will be of high value for the in situ formation of cyclic peptide libraries, thus being applicable in drug discovery and development.

Quaternary Ammonium Salts of Cationic Lipopeptides with Lysine Residues — Synthesis, Antimicrobial, Hemolytic and Cytotoxic Activities

Ultrashort cationic lipopeptides (USCLs) and quaternary ammonium salts constitute two groups of cationic surfactants with high antimicrobial activity. This study aimed to investigate the influence of quaternization of the amino group of the lysine side chain in USCLs on their antimicrobial, hemolytic and cytotoxic activities. To do this, two series of lipopeptides were synthesized, USLCs and their quaternized analogues containing trimethylated lysine residues — qUSCLs (quaternized ultrashort cationic lipopeptides). Quaternization was performed on a resin during a standard solid-phase peptide synthesis with CH3I as the methylating agent. According to our knowledge, this is the first study presenting on-resin peptide quaternization. The lipopeptides were tested for their antibacterial and antifungal activities against the ESKAPE group (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa and Klebsiella aerogenes) bacteria and Candida glabrata yeast-like fungus. Most of the compounds proved to be active antimicrobial agents with enhanced activity against Gram-positive strains and fungi and a lower against Gram-negative species. In addition, the antimicrobial activity of lipopeptides was increasing with an increase in hydrophobicity but qUSCLs exhibited usually a poorer antimicrobial activity than their parent molecules. Furthermore, the toxicity against red blood cells and human keratinocytes was assessed. It’s worth emphasizing that qUSCLs were less toxic than the parent molecules of comparative hydrophobicity. The results of the study proved that qUSCLs can offer a higher selectivity to pathogens over human cells than that of USCLs. Last but not least, quaternization of the peptides could increase their solubility and therefore their bioavailability and utility.

Synthesis, In Silico Logp Study, and In Vitro Analgesic Activity of Analogs of Tetrapeptide FELL.

The inflammatory process represents a specific response of the organism's immune system. More often, it is related to the rising pain in the affected area. Independently of its origin, pain represents a complex and multidimensional acute or chronic subjective unpleasant perception. Currently, medical doctors prescribe various analgesics for pain treatment, but unfortunately, many of them have adverse effects or are not strong enough to suppress the pain. Thus, the search for new pain-relieving medical drugs continues. New tetrapeptide analogs of FELL with a generaanalgesic-Glu-X3-X4-Z, where X = Nle, Ile, or Val and Z = NH2 or COOH, containing different hydrophobic amino acids at positions 3 and 4, were synthesized by means of standard solid-phase peptide synthesis using the Fmoc/OtBu strategy in order to study the influence of structure and hydrophobicity on the analgesic activity. The purity of all compounds was monitored by HPLC, and their structures were proven by ESI-MS. Logp values (partition coefficient in octanol/water) for FELL analogs were calculated. Analgesic activity was examined by the Paw-pressure test (Randall-Selitto test). The obtained results reveal that Leu is the best choice as a hydrophobic amino acid in the FELL structure. The best analgesic activity is found in the parent compound FELL and its C-terminal amide analog.

Synthesis of 177Lu-Labeled, Somatostatin-2 Receptor-Targeted Metalla-Assemblies: Challenges in the Design of Supramolecular Radiotherapeutics.

Self-assembled supramolecular coordination complexes (SCCs) hold promise for biomedical applications in cancer therapy, although their potential in the field of nuclear medicine is still substantially unexplored. Therefore, in this study an exo-functionalized cationic [Pd2L2]4+ metallacycle (L = 3,5-bis(3-ethynylpyridine)phenyl), targeted to the somatostatin-2 receptor (sst2R) and featuring the DOTA chelator (1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid) in order to bind the β-- and γ-emitter lutetium-177, was synthesized by self-assembly following ligand synthesis via standard solid-phase peptide synthesis (SPPS). This metallacycle was then characterized by reverse-phase high-performance liquid chromatography (RP-HPLC), electrospray ionization mass spectrometry (ESI-MS), and 1H and 1H-DOSY NMR (DOSY = diffusion-ordered spectroscopy). A procedure for the radiolabeling of the metallacycle with 177Lu was also optimized. The resulting [nat/177Lu]Lu-DOTA-metallacycle, termed [nat/177Lu]Lu-Cy, was evaluated concerning its stability and in vitro properties. The compound was more lipophilic compared to the reference [177Lu]Lu-DOTA-TATE (logPOct/H2O = -0.85 ± 0.10 versus -3.67 ± 0.04, respectively). While [natLu]Lu-Cy revealed low stability in a DMEM/F12 GlutaMax medium, it demonstrated good stability in other aqueous media as well as in DMSO. A high sst2R binding affinity (expressed as IC50) was determined in CHOsst2 cells (Chinese hamster ovary cells that were stably transfected with human sst2R). Moreover, the metallacycle exhibited high human serum albumin binding, as assessed by high-performance affinity chromatography (HPAC), and moderate stability in human serum compared to [177Lu]Lu-DOTA-TATE (TATE = (Tyr3)-octreotate). In order to improve stability, a heteroleptic approach was used to develop a less sterically hindered cage-like SCC that is potentially endowed with host-guest chemistry capability, which has been preliminarily characterized by RP-HPLC and ESI-MS. Overall, our initial results encourage future studies on sst2R-directed SCCs and have led to new insights into the chemistry of ss2R-directed SCCs for radiopharmaceutical applications.

Four of a Kind: A Complete Collection of ADP-Ribosylated Histidine Isosteres Using Cu(I)- and Ru(II)-Catalyzed Click Chemistry.

Adenosine diphosphate ribosylation (ADP-ribosylation) is a crucial post-translational modification involved in important regulatory mechanisms of numerous cellular pathways including histone maintenance and DNA damage repair. To study this modification, well-defined ADP-ribosylated peptides, proteins, and close analogues thereof have been invaluable tools. Recently, proteomics studies have revealed histidine residues to be ADP-ribosylated. We describe here the synthesis of a complete set of triazole-isosteres of ADP-ribosylated histidine to serve as probes for ADP-ribosylating biomachinery. By exploiting Cu(I)- and Ru(II)-catalyzed click chemistry between a propargylglycine building block and an α- or β-configured azidoribose, we have successfully assembled the α- and β-configured 1,4- and 1,5-triazoles, mimicking N(τ)- and N(π)-ADP-ribosylated histidine, respectively. The ribosylated building blocks could be incorporated into a peptide sequence using standard solid-phase peptide synthesis and transformed on resin into the ADP-ribosylated fragments to provide a total of four ADP-ribosyl triazole conjugates, which were evaluated for their chemical and enzymatic stability. The 1,5-triazole analogues mimicking the N(π)-substituted histidines proved susceptible to base-induced epimerization and the ADP-ribosyl α-1,5-triazole linkage could be cleaved by the (ADP-ribosyl)hydrolase ARH3.

Bioorthogonal Peptide Macrocyclization Using Oxime Ligation.

The biocompatible synthesis of constrained peptides is challenging. Oxime ligation is a bioorthogonal technique frequently used for protein bioconjugation. We report a straightforward method to install N-terminal ketones and aminooxy side chains during standard solid-phase peptide synthesis. Cyclization occurs spontaneously after acidic cleavage or in aqueous buffer. We demonstrate the facile synthesis of protease inhibitors with varying conformational constraint. The most constrained peptide displayed an activity 2 orders of magnitude higher than its linear analog.

Embedding Peptides into Synthetic Polymers: Radical Ring-Opening Copolymerization of Cyclic Peptides.

Biopolymers such as proteins and nucleic acids are the key building blocks of life. Synthetic polymers have nevertheless revolutionized our everyday life through their robust synthetic accessibility. Combining the unmatched functionality of biopolymers with the robustness of tailorable synthetic polymers holds the promise to create materials that can be designed ad hoc for a wide array of applications. Radical polymerization is the most widely applied polymerization technique in both fundamental science and industrial polymer production. While this polymerization technique is robust and well controlled, it generally yields unfunctional all-carbon backbones. Combinations of natural polymers such as peptides, with synthetic polymers, are thus limited to tethering peptides onto the side chains or chain ends of the latter. This synthetic limitation is a critical restraint, considering that the function of biopolymers is programmed into the sequence of their main chain (i.e., primary structure). Here, we report the radical copolymerization of peptides and synthetic comonomers yielding synthetic polymers with defined peptide sequences embedded into their main chain. Key was the development of a solid-phase peptide synthesis (SPPS) approach to generate synthetic access to peptide conjugates containing allylic sulfides. Following cyclization, the obtained peptide monomers can be readily copolymerized with N,N-dimethylacrylamide (DMA)─controlled by reversible addition-fragmentation chain transfer (RAFT). Importantly, the developed synthetic strategy is compatible with all 20 standard amino acids and uses exclusively standard SPPS chemicals or chemicals accessible in one-step synthesis─prerequisite for widespread and universal application.

Liposomal Formulations of a Polyleucine-Antigen Conjugate as Therapeutic Vaccines against Cervical Cancer.

Human papilloma virus (HPV) is responsible for all cases of cervical cancer. While prophylactic vaccines are available, the development of peptide-based vaccines as a therapeutic strategy is still under investigation. In comparison with the traditional and currently used treatment strategies of chemotherapy and surgery, vaccination against HPV is a promising therapeutic option with fewer side effects. A peptide derived from the HPV-16 E7 protein, called 8Qm, in combination with adjuvants showed promise as a therapeutic vaccine. Here, the ability of polymerized natural amino acids to act as a self-adjuvating delivery system as a therapeutic vaccine was investigated for the first time. Thus, 8Qm was conjugated to polyleucine by standard solid-phase peptide synthesis and self-assembled into nanoparticles or incorporated in liposomes. The liposome bearing the 8Qm conjugate significantly increased mice survival and decreased tumor growth after a single immunization. Further, these liposomes eradicated seven-day-old well-established tumors in mice. Dendritic cell (DC)-targeting moieties were introduced to further enhance vaccine efficacy, and the newly designed liposomal vaccine was tested in mice bearing 11-day-old tumors. Interestingly, these DCs-targeting moieties did not significantly improve vaccine efficacy, whereas the simple liposomal formulation of 8Qm-polyleucine conjugate was still effective in tumor eradication. In summary, a peptide-based anticancer vaccine was developed that stimulated strong cellular immune responses without the help of a classical adjuvant.

Selective thiazoline peptide cyclisation compatible with mRNA display and efficient synthesis.

Peptide display technologies are a powerful method for discovery of new bioactive sequences, but linear sequences are often very unstable in a biological setting. Macrocyclisation of such peptides is beneficial for target affinity, selectivity, stability, and cell permeability. However, macrocyclisation of a linear hit is unreliable and requires extensive structural knowledge. Genetically encoding macrocyclisation during the discovery process is a better approach, and so there is a need for diverse cyclisation options that can be deployed in the context of peptide display techniques such as mRNA display. In this work we show that meta-cyanopyridylalanine (mCNP) can be ribosomally incorporated into peptides, forming a macrocycle in a spontaneous and selective reaction with an N-terminal cysteine generated from bypassing the initiation codon in translation. This reactive amino acid can also be easily incorporated into peptides during standard Fmoc solid phase peptide synthesis, which can otherwise be a bottleneck in transferring from peptide discovery to peptide testing and application. We demonstrate the potential of this new method by discovery of macrocyclic peptides targeting influenza haemagglutinin, and molecular dynamics simulation indicates the mCNP cross-link stabilises a beta sheet structure in a representative of the most abundant cluster of active hits. Cyclisation by mCNP is also shown to be compatible with thioether macrocyclisation at a second cysteine to form bicycles of different architectures, provided that cysteine placement reinforces selectivity, with this bicyclisation happening spontaneously and in a controlled manner during peptide translation. Our new approach generates macrocycles with a more rigid cross-link and with better control of regiochemistry when additional cysteines are present, opening these up for further exploitation in chemical modification of in vitro translated peptides, and so is a valuable addition to the peptide discovery toolbox.

Biocompatible and Selective Generation of Bicyclic Peptides.

Bicyclic peptides possess superior properties for drug discovery; however, their chemical synthesis is not straightforward and often neither biocompatible nor fully orthogonal to all canonical amino acids. The selective reaction between 1,2-aminothiols and 2,6-dicyanopyridine allows direct access to complex bicyclic peptides in high yield. The process can be fully automated using standard solid-phase peptide synthesis. Bicyclization occurs in water at physiological pH within minutes and without the need for a catalyst. The use of various linkers allows tailored bicyclic peptides with qualities such as plasma stability, conformational preorganization, and high target affinity. We demonstrate this for a bicyclic inhibitor of the Zika virus protease NS2B-NS3 as well as for bicyclic versions of the α-helical antimicrobial peptide aurein 1.2.

Synthesis of Peptide N-Acylpyrroles via Anodically Generated N,O-Acetals

AbstractAn electrochemical approach to peptide C-terminal N-acylpyrroles is described from readily accessible C-terminal hydroxyproline-containing peptides, prepared via standard Fmoc solid-phase peptide synthesis (Fmoc-SPPS). Following electrochemical decarboxylation, the reactive hydroxyproline-derived N,O-acetal intermediate is aromatized under mild acidic conditions, which enable concomitant deprotection of amino acid side-chain protecting groups. The resulting peptide N-acylpyrrole is amenable to late-stage peptide modifications, including reduction with NaBH4 to deliver a valuable C-terminal peptide aldehyde motif.

Structured cyclic peptide mimics by chemical ligation

AbstractWe report the development of a β‐turn mimic that allows the direct formation of cyclic peptides through a spontaneous cyclisation under standard solid phase peptide synthesis (SPPS) cleavage conditions. The mimic is formed via an acylhydrazone, which is either reduced in situ by triisopropylsilane‐trifluoroacetic acid, or which can be isolated and reduced in a separate step. This method uses commercially available reagents and is compatible with manual and automated SPPS methods. The cyclisation is tolerant of polar residues at the C‐terminal position, with the exception of asparagine, for which a subsequent structural rearrangement similar to aspartimide formation was observed. The cyclisation method has been shown to tolerate ring sizes equivalent to 5–10 amino acid residues. We have used this method to design and synthesise potential selective integrin binding sequences with controlled conformations.

Head-to-tail cyclization of side chain-protected linear peptides to recapitulate genetically-encoded cyclized peptides.

Genetically‐encoded cyclic peptide libraries allow rapid in vivo screens for inhibitors of any target protein of interest. In particular, the Split Intein Circular Ligation of Protein and Peptides (SICLOPPS) system exploits spontaneous protein splicing of inteins to produce intracellular cyclic peptides. A previous SICLOPPS screen against Aurora B kinase, which plays a critical role during chromosome segregation, identified several candidate inhibitors that we sought to recapitulate by chemical synthesis. We describe the syntheses of cyclic peptide hits and analogs via solution‐phase macrocyclization of side chain‐protected linear peptides obtained from standard solid‐phase peptide synthesis. Cyclic peptide targets, including cyclo‐[CTWAR], were designed to match both the variable portions and conserved cysteine residue of their genetically‐encoded counterparts. Synthetic products were characterized by tandem high‐resolution mass spectrometry to analyze a combination of exact mass, isotopic pattern, and collisional dissociation‐induced fragmentation pattern. The latter analyses facilitated the distinction between targets and oligomeric side products, and served to confirm peptidic sequences in a manner that can be readily extended to analyses of complex biological samples. This alternative chemical synthesis approach for cyclic peptides allows cost‐effective validation and facile chemical elaboration of hit candidates from SICLOPPS screens.

A Selenium-based Cysteine Surrogate for Protein Chemical Synthesis.

N-selenoethyl cysteine (SetCys) in the form of its cyclic selenosulfide is a cysteine surrogate, whose reactivity depends on the reducing power of the medium. SetCys does not interfere with the native chemical ligation reaction under mild reducing conditions, that is in the absence of tris(2-carboxyethyl)phosphine (TCEP). In contrast, subjecting SetCys to TCEP results in the spontaneous loss of its N-selenoethyl appendage and thus to its conversion into a Cys residue. Therefore, SetCys can be used for the redox-controlled assembly of peptide segments using NCL. We provide in this protocol detailed procedures for the synthesis of Fmoc-protected SetCys residue and for its incorporation into peptides using standard solid-phase peptide synthesis protocols. We also describe its use for the chemical synthesis of proteins through the redox-controlled assembly of three peptide segments in one-pot.

Universal Access to Protease Chemiluminescent Probes through Solid-Phase Synthesis.

Protease chemiluminescent probes exhibit extremely high detection sensitivity for monitoring activity of various proteolytic enzymes. However, their synthesis, performed in solution, involves multiple synthetic and purification steps, thereby generating a major limitation for rapid preparation of such probes with diverse substrate scope. To overcome this limitation, we developed a general solid-phase-synthetic approach to prepare chemiluminescent protease probes, by peptide elongation, performed on an immobilized chemiluminescent enol-ether precursor. The enol-ether precursor is immobilized on a 2-chlorotrityl-chloride resin through an acrylic acid substituent by an acid-labile ester linkage. Next, a stepwise elongation of the peptide is performed using standard Fmoc solid-phase peptide synthesis. After cleavage of the peptide-enol-ether precursor from the resin, by hexafluoro-iso-propanol, a simple oxidation of the enol-ether yields the final chemiluminescent dioxetane protease probe. To validate the applicability of the methodology, two chemiluminescent probes were efficiently prepared by solid-phase synthesis with dipeptidyl substrates designed for activation by aminopeptidase and cathepsin-B proteases. A more complex example was demonstrated by the synthesis of a chemiluminescent probe for detection of PSA, which includes a peptidyl substrate of six amino acids. We anticipate that the described methodology would be useful for rapid preparation of chemiluminescent protease probes with vast and diverse peptidyl substrates.

Synthesis of Protected 3,4- and 2,3-Dimercaptophenylalanines as Building Blocks for Fmoc-Peptide Synthesis and Incorporation of the 3,4-Analogue in a Decapeptide Using Solid-Phase Synthesis.

3,4-Dimercaptophenylalanines and 2,3-dimercaptophenylalanines have been synthesized for the first time by nucleophilic substitution of a protected aminomalonate on 3,4- and 2,3-dimercaptobenzyl bromide derivatives. The dithiol functions were protected as thioketals, and the key precursors, diphenylthioketal-protected dimercaptobenzyl bromides, were synthesized via two distinct routes from either dihydroxy benzoates or toluene-3,4-dithiol. Racemic mixtures of the fully protected amino acids were separated by chiral HPLC into the corresponding enantiomers. The absolute configuration of both 3,4- and 2,3-analogues could be assigned based on X-ray crystallography and VCD/DFT measurements. Thioketal groups were deprotected upon reaction with mercury oxide and aqueous tetrafluoroboric acid followed by treatment with H2S gas under an argon atmosphere to obtain the corresponding dimercapto amino acids. The optically pure l-Fmoc-protected 3,4-analogue (S- enantiomer) was successfully incorporated into a decapeptide using standard solid-phase peptide synthesis. Therefore, dithiolene-functionalized peptides are now accessible from a simple synthetic procedure, and this should afford new molecular tools for research into the catalysis, diagnostic, and nanotechnology fields.

Design and Synthesis of a New Amphipathic Cyclic Decapeptide with Rapid, Stable, and Continuous Antibacterial Effects

Pathogens can acquire high resistance against even the most powerful antibiotics because of the long periods of treatment and high usage of antimicrobial agents. In addition, the severe side effects of commonly used antibiotics can initiate secondary diseases or may lead to death. Antimicrobial peptides (AMPs) have been reported to exhibit prokaryotic selectivity and low microbial resistance. Furthermore, AMPs show a good ability to penetrate the cell walls of microorganisms. In this study, a cyclic decapeptide and its linear counterpart were synthesized by a standard solid phase peptide synthesis method (SPPS) in a quantitative yield of the linear decapeptide (97%) and a good yield of the cyclic form (45%). Antibacterial studies were performed using Escherichia coli (a widespread Gram-negative pathogen) and Bacillus thuringiensis as a representative Gram-positive pathogen. The minimal inhibitory concentration (MIC) values were evaluated by the broth microdilution method. The cyclic peptide and its linear counterpart exhibited MIC values of 0.16 and 0.3 mg/mL, respectively, against Escherichia coli. Against Bacillus thuringiensis, the peptides had the same MIC value of 0.24 mg/mL. Time-kill studies were performed using E. coli, which indicated a fast killing effect of both peptides (≥ 99% of the bacterial cells) after 1 h of incubation using a concentration of two times the MIC value for each peptide. Moreover, bacterial cell viability studies against E. coli carried out using a high bacterial concentration showed that both peptides have a maximum killing effect of more than 80% of the tested bacterial cells.