Standard Shoes Research Articles

Horseshoe effects on equine gait-A systematic scoping review.

To provide an overview of available research about effects of horseshoes on equine kinetics and kinematics. The terms, "horse/equine," "hoof," "shoes/horseshoes," "kinetics," and "kinematics" were searched in PubMed, Web of Science, Center for Agriculture and Bioscience International, and United States Department of Agriculture National Agricultural Library for manuscripts from first availability to 2024. Independent reviewers used preferred reporting items for systematic reviews and meta-analyses guidelines to map and extract evidence-based data from sources. Metrics included participant demographics, research methods, major findings, and study limitations. Knowledge gaps were also identified. A total of 46 studies were included. Most utilized non-lame horses to compare original shoe designs or modifications to unshod or a standard open-heel shoe. Horse demographics and gait, study design and outcome measures varied widely. Prevalent data collection equipment included force platforms and pressure plates, wearable force measuring technology, and videography. Many studies reported shoeing effects on limb forces and motion, but there was little consensus among unrelated studies. Common limitations included insufficient data resolution, no randomization, small sample size, single breed, and outcome measures specific or unique to the study. Knowledge gaps included data collection from all limbs and the impact of conformation and limb and hoof morphology and health condition on outcomes. Information from manuscripts that met inclusion criteria confirmed distinct, variable effects of shoe characteristics on equine gait parameters. Details from published work can serve as resource for clinical decisions and to guide standardization among investigations on shoe configuration effects on equine motion.

An exploration of the agreement, inter- and intra-rater reliability, and reproducibility of three common methods used to measure minimum toe clearance with optical motion capture systems under three shoe conditions

BackgroundThe gait variable minimum toe clearance (MTC) has been investigated concerning trip-related fall research in older adults. However, comparing studies is difficult due to the different methods used to measure MTC and shoe conditions, which may affect agreement. Measurement methods can include using a single virtual point (SVP), multiple virtual points (MVPS), or metatarsal head markers (marker-based). The shoe types used in MTC studies include standard shoes (SS), personal shoes (PS), and barefoot (BF) conditions. Research questionWhat is the agreement, inter and intra-rater reliability, and repeatability for the 3 commonly used methods of measuring MTC (SVP, MVPS, marker-based) under the 3 shoe conditions for optical motion capture systems (SS, PS, BF)? MethodsTwelve healthy young adults (mean [SD] 23.8 [1.9] years,7 males) participated in this observational study. In a randomized order, participants completed 25 walking trials at self-selected normal and slow speeds in SS, PS, and BF conditions while infrared cameras recorded the maker trajectories. Each participant performed a familiarization trial for at least 1 minute before collecting data on each shoe condition. Statistical analyses included Bland-Altman 95 % limits of agreement (LOA) analyses, interclass correlation coefficient (ICC) analyses for inter- and intra-rater reliability, and the repeatability coefficient (RC). ResultsThe SVP and MVPS had a tighter 95 % LOA than the marker-based method, particularly under SS and BF conditions. The inter-rater reliability was good to excellent under these shoe conditions. Intra-reliability for all methods under all shoe conditions was excellent (ICC >.90). The RC was very similar for each method, with none exceeding 1.02 cm. SignificanceThe study provides estimates of the agreement between MTC methods and suggests that only SVP or MVPS produced similar results in SS/BF conditions. Additionally, a "true" change in MTC requires a difference greater than 1.02 cm.

The suppression of lower leg electromyography when walking in textured foot orthoses.

Previous research exploring the effects of tactile feedback in standing balance protocols may have generated results that misrepresent the modulatory capabilities of cutaneous afference on generating motor output responses. The neurosensory mechanism of textured foot orthoses to maximize the activation of cutaneous mechanoreceptors is through repetitive foot sole skin indentation. Thus, the purpose of this experimental protocol was to investigate muscular activity amplitude changes during the stance phase of gait, specifically when walking on level ground and when stepping onto a raised wedge, and while wearing textured foot orthoses compared to orthoses without texture. Twenty-one healthy young adults were fit to a standardized neutral running shoe and completed five level and wedged walking trials wearing both orthoses. Kinematic, kinetic and electromyography (EMG) data were recorded from eight lower limb muscles. The results of this study revealed EMG suppression of lower leg musculature during stance when walking in textured foot orthoses,and this was most pronounced when lower leg musculature is typically most active. The addition of texture in foot orthoses design, spanning the entire length of the foot sole, appears to be a clear mechanism to modulate neurosensory feedback with intent to suppress EMG of shank musculature during gait.

A rare case of Klippel-Trenaunay-Weber syndrome in a child

Klippel-Trenon-Weber syndrome is a rare congenital disorder characterized by polymorphism of clinical manifestations, including vascular malformations, skeletal deformities, facial asymmetry and other developmental anomalies. The study of this syndrome is driven by its rarity, complexity of diagnosis and treatment, and significant impact on the quality of life of patients. Early diagnosis and adequate surgical intervention can significantly improve the prognosis and reduce the risk of serious complications This is a rare congenital disease characterized by a triad of symptoms: angiodysplasia, congenital skeletal anomalies and muscle hypertrophy. This syndrome is caused by a defect in the keratin 13 gene (KRT13), which causes dysfunction of cells of ectodermal origin, including keratinocytes, endothelial cells and ectodermal cells. Clinical symptoms of the syndrome may include hydrocephalus, congenital kidney defects, limb abnormalities, and other pathological changes. Treatment usually depends on the specific symptoms and complications and may include surgery, drug therapy, physiotherapy and rehabilitation. Understanding the genetic mechanisms and factors that cause the syndrome will allow us to develop more effective diagnostic and treatment methods and improve the prognosis for patients. The aim of the study was to demonstrate a clinical case of this extremely rare paediatric pathology, to show the peculiarities of its diagnosis and treatment. The peculiarity of this patient was a deformity (severe thickening) of the right foot at birth. In the process of growth, the deformity of the right foot increased, making it impossible to use standard shoes. The subcutaneous venous network on the right lower limb became stronger. The course of this disease and the treatment performed are described. Keywords: syndactyly, hypertrophy, foot, surgery, limb asymmetry, congenital anomaly.

Assessment of rheumatoid arthritis patients' knowledge about foot problems related to their illness and foot care practice.

Foot problems are very common in rheumatoid arthritis (RA). Podiatric intervention through therapeutic education of RA patients on the different potential foot problems could improve patients' knowledge and management of their foot problems. This study aimed to evaluate the knowledge of RA patients on podiatric problems related to their illness and foot care practices. This was a cross-sectional study including patients diagnosed with RA and aged older than 18years. Sociodemographic data, disease characteristics, and therapeutic data were collected. RA foot problems knowledge and foot care practice were assessed using a questionnaire combining questions developed from the literature search and a pretested validated questionnaire. Overall, 103 patients were included of whom 94 were female. The mean age was 56years (±10years) and the mean disease duration was 15years (±10years). Over 77% of patients reported never having received foot-health-related education. With regard to their knowledge about RA foot involvement, patients were aware that RA can affect the feet similarly to the hands (83%), lead to deformation of the foot (86%), lead to walking difficulties and falling (68%), and produce skin lesions of the foot (31%). Regarding participant's knowledge of appropriate footwear, 65% agreed that it would be beneficial to wear quality standard sports shoes. However, less than one-third of patients know the podiatrist's skills. Our study showed an awareness of the repercussions of RA on feet but a lack of knowledge on proper foot care, thus identifying a need for foot health therapeutic education.

Effects of Metatarsal Foot Orthosis on Biomechanical 3D Ground Reaction Force in Individuals with Morton Foot Syndrome during Gait: A Cross-Sectional Study.

Morton's foot syndrome (MFS) is characterized by a distally longer head of the second metatarsal bone compared to the head of the first metatarsal bone. Few studies have investigated the effects of a foot orthosis on kinetic characteristics, such as ground reaction force (GRF), during walking in individuals with MFS. This study aimed to verify dynamic GRF using a 3D motion analysis system, including two platforms with and without a foot orthosis condition. Kinetic GRF data of 26 participants with MFS were collected using a motion analysis system and a force platform. Participants were asked to walk wearing standard shoes or shoes with a pad-type foot orthosis. Repeated-measures analysis of variance (ANOVA) was used to compare the kinetic GRF data in the stance phase during gait according to the side of the leg and orthotic conditions for MFS. The late sagittal and frontal peak forces showed that the presence of a foot orthosis condition significantly increased the GRF when compared with the absence of a foot orthosis condition for both sides of the feet (p < 0.05). In addition, the second vertical peak force of the GRF showed that the presence of a foot orthosis condition significantly increased the GFR when compared with the absence of a foot orthosis condition on the side of the right foot (p = 0.023). Significant effects were observed in the late sagittal and frontal peak GRFs when wearing the pad-type foot orthosis in individuals with MFS during gait. Thus, even if there are no signs and symptoms of MFS in patients diagnosed with the disease condition, clinical interventions, such as a foot orthosis, that can be simply applied to shoe insoles are needed to manage and prevent various musculoskeletal disorders that may develop in the future. It was hypothesized that when wearing a foot orthosis, the participants would walk with increased GRF during gait compared to those without an orthosis.

Gait biomechanics do not differ between adolescents with and without patellofemoral pain.

To determine if adolescents with patellofemoral pain exhibit different biomechanical characteristics to asymptomatic adolescents during walking and running. Twenty-eight adolescents with patellofemoral pain (16 male, 12 female, mean [SD] age: 14.3 [1.7] years) and 24 asymptomatic adolescents (13 male, 11 female, mean [SD] age: 14.1 [1.6] years) participated. Participants walked and ran on an instrumented treadmill in a standardized athletic shoe. Continuous hip, knee, and ankle joint angles and moments, and frontal plane pelvic motion were compared between groups using one-dimensional statistical parametric mapping independent t-tests (alpha <0.05). Cadence and stride length were compared between groups using independent t-tests. During walking, adolescents with patellofemoral pain had a higher hip extension moment at 7%-8% of the gait cycle (p = 0.04) and walked with a shorter stride length (mean difference [95% confidence interval] = -0.07 [-0.1, -0.01] m). There were no other differences between groups during walking. During running, adolescents with patellofemoral pain had greater knee flexion than asymptomatic adolescents at 35%-40% of the gait cycle (p = 0.04) and ran with a higher cadence (mean difference [95% confidence interval] = 5.8 [2.0, 9.5] steps/min). There were no other statistically significant differences between groups during running. Adolescents with patellofemoral pain demonstrate few biomechanical differences to asymptomatic adolescents during walking and running. The identified differences are likely of limited clinical importance. Biomechanical alterations which have been previously associated with patellofemoral pain in adults, may not need to be the target of management of adolescent patellofemoral pain.

Impact of Shellac and Gum Arabic in Shoe Polish Formulation based on Karanj Oil

The study was conducted from August, 2021 to March, 2022 at the Department of Agricultural Engineering, Birsa Agricultural University, Kanke, Ranchi, Jharkhand, India to develop shoe polish based on Karanj oil and the impact of shellac and gum arabic in its formulation. The standardized composition of shoe polish was obtained as 3 part oil and one-part bee wax containing other elements like colour pigment, shellac, gum arabic and turpentine oil. To overcome the problem of colour, sixteen various combinations of shellac and gum arabic were carried out for improvement of colour in each case of black and brown polish. The developed shoe polish was tested for texture, applicability, spreadability, and ease in taking out the material. Colour was recorded with a gloss meter. The highest gloss meter reading i.e. 10.62 GU was recorded in the case of a black shoe polish containing shellac and gum arabic each weighing 0.75 g whereas a sample containing 1.25 g shellac and gum arabic each showed the lowest gloss reading of 3.88 GU. In the case of brown polish, the highest gloss meter reading i.e. 5.24 GU was recorded in the case of a sample containing shellac and gum arabic weighing 1.25 g each, and the lowest was observed in the case of the sample containing shellac weighing 0.5g and gum arabic weighing 0.75 g. Based on gloss value and sensory evaluation, the developed sample was found very near to standard brand shoe polish (Cherry) except that it gave an oily appearance initially.

Combining Computer Vision, Artificial Intelligence and 3D Printing in Wheelchair Design Customization: The Kyklos 4.0 Approach

In the current paper, we present our work towards developing a solution combining computer vision and AI to support footrest design customization in the wheelchair industry. Wheelchairs and postural systems are complex and often user centric in the design process. Those products require a wide range of adjustments to adapt to the various anthropometries and disabilities of patients. Most commercial products, dedicated to severe disability, also include a series of additional elements, designed to keep the patient in a comfortable but “fixed” position. Such systems do not allow to “fix and maintain” the position of patient foot, especially for patients who have no control over their lower limbs. For that reason, it becomes essential to supply wheelchairs with specific elements to hold patient's shoe in place. Commercial foot supports are typically developed on standard sizes and do not always cover the entire population. In addition, those designs are based on standard shoes, thus they do not lend themselves well to adapting to special shoes or orthopedic shoes. Feet final position therefore becomes a key element in correct postural management. In this paper, we investigate the use of computer vision and AI to correctly define customization parameters of the footrest. The proposed design has been developed based on the specifications received from the Pro Medicare S.r.l[ https://www.promedicare.eu/en/] orthopedic technicians. We present suitable algorithms, design principles and well defined components towards the implementation of our proof of concept. We also present the testing activities we have undertaken and the obtained performance results.

Peritalar Osteotomy for Rigid Pes Cavus and Cavovarus

Category: Other; Hindfoot Introduction/Purpose: Pes cavus and pes cavovarus deformities create varus loading during stance phase of gait that often presents as lateral ligament instability, peroneal tendon rupture or lateral column overload. When flexible, management ranges from the use of custom foot orthoses or an ankle-foot orthosis, to a combination of soft tissue releases, tendon transfer and/or corrective osteotomy. When rigid, clinical management involves corrective osteotomies or triple arthrodesis. The Ilizarov method of gradual correction of structural bony deformities provides a powerful tool to achieve a stable plantigrade foot in patients with complex multiplanar structural deformities. This investigation presents a method of a continuous multiple bone “peri-talar” osteotomy, combined with acute correction of the multiplanar deformity, for treating severe rigid structural pes cavus and pes cavovarus. Methods: Following IRB approval, patients were identified based on a combination of CPT (Current Procedural Terminology) codes and confirmed by chart review. Standard demographics, etiology of deformity and weight-bearing radiographs (before and after surgery) were reviewed. Perioperative complications, clinical evaluation and type of footwear used were recorded. A favorable clinical outcome was defined as a foot that is ulcer and infection-free, and able to walk in the community with standard oxford shoes. Surgical technique involved an osteotomy from the dorsal calcaneus, carried anterior and inferior for approximately fifty percent of the calcaneus, and then carried anteriorly into the mid cuboid. A second osteotomy through a separate medial incision is made from medial to lateral, splitting the navicular, and connecting to the initial lateral osteotomy. Acute correction of the multiplanar deformity is accomplished. Maintenance of the correction is then achieved with the use of an Ilizarov-like “mitre” circular external fixation construct. Results: 17 patients (three bilateral) were included, with average follow-up of 58.3 (range 12-183) months. One patient developed a postoperative wound infection that required formal surgical debridement. He died of unrelated causes before removal of the external fixator. A second postoperative wound infection was managed with local wound care. One pin-site infection required debridement following removal of the external fixator. Due to the rotational component of the deformities, meaningful measurement of deformity correction could not be accomplished. This clinical outcome was based primarily on the ability to walk without complex bracing. Sixteen of the twenty feet achieved ambulation with standard oxford footwear. Three patients required a short AFO, but were unrestricted community ambulators. A review of the non-standardized x-rays was not able to yield meaningful data. Conclusion: There have been very few clinical reports of surgical correction of patients with severe rigid pes cavovarus or equinovarus deformities. This small series of patients underwent correction of complex rigid pes cavovarus type deformities with a peritalar osteotomy, acute correction of deformity and maintenance of correction with a “mitre frame” circular external fixator. Several proponents of the Ilizarov method have described individual patients with very similar methodology. This small series of patients suggests that one can achieve an acute, or gradual, correction of complex deformity with multiple related osteotomies, and maintenance of that correction with an adjustable circular external fixator.

Effects of a range of 6 prefabricated orthotic insole designs on plantar pressure in a healthy population: A randomized, open-label crossover investigation.

Prefabricated orthotic insoles are widely commercially available for self-selection to treat foot and lower-body musculoskeletal pain, without requiring advice from health care professionals. Although they are generally designed to mimic traditional design features of custom-made orthotics used in clinical practice, the effects of prefabricated insoles on plantar pressure distribution are poorly understood. This investigation aimed to evaluate and directly compare the effects of a range of 6 different commercially available prefabricated orthotic insole designs on plantar pressure in healthy individuals. This was a single-center, randomized, open-label, crossover investigation. In-shoe dynamic pressure (F-scan) was investigated in 24 healthy subjects with normal foot posture, wearing standard shoes alone and in combination with 6 different orthotic insoles, consecutively, measured on a single day. The biomechanical impact of each insole was determined by the statistical significance of changes from baseline measurements (standard shoe alone). Insoles with heel cups and medial arch geometries consistently increased contact area at medial arch and whole-foot regions and reduced both plantar peak pressure (PP) and pressure time integral at medial arch and heel regions. This investigation has aided in further understanding the mode of action of prefabricated insoles in a healthy population. The insoles in this study redistributed plantar pressure at key regions of the foot, based on design features common to prefabricated insoles. Prefabricated orthotic insoles represent an easily accessible means of reducing lower-body musculoskeletal stress for those who spend prolonged periods of time on their feet.

Plantar pressure reduction through self-adapting insoles with a heel-cup in standard and rocker shoes

Plantar pressure reduction through self-adapting insoles with a heel-cup in standard and rocker shoes

The Ankle Energetic Effect of Carbon Fiber Insoles on Walking

Background & Aims: Various insoles have been developed, but little objective evaluation of their effectiveness has been conducted. We investigated the effect of insoles supporting the cuboid bone and anterior part of the calcaneus in healthy individuals.Methods: The subjects included 18 healthy males and females. They walked in standardized shoes with a flat insole (hereinafter, FI, a flat insole made of polyurethane without an arched shape on the surface) and a carbon fiber insole (hereinafter, CFI, made of carbon and supporting the cuboid and anterior part of the calcaneus). We used a three-dimensional motion analysis device and a force plate to analyze gait and quantitatively compared the effect of CFI.Results: The CFI reduced ankle power without reducing walking ability. In particular, with regard to the left-right difference in ankle joint sagittal plane power, we found that when the left-right difference was large, the use of CFI reduced the left-right difference in power.Conclusion: The burden on the muscles of the lower limbs on one side is reduced, and sports performance, including walking, can be maintained.

EFFECTS OF ASSISTIVE TENNIS SHOES ON GROUND REACTION FORCE FOR PATIENTS WITH PERIPHERAL ARTERY DISEASE DURING WALKING

Abstract Peripheral artery disease (PAD) is caused due to buildup of atherosclerotic plaques, typically in the leg arteries, preventing adequate blood circulation and ultimately claudication. A previous study showed that the vertical ground reaction force (VGRF) curve is significantly flatter in claudicating patients, resulting in a lower and less fluctuant center of mass when ambulating. Patients with PAD also demonstrate significantly decreased propulsion forces in the anterior– posterior direction. Assistive tennis shoes (carbon fiber: CF, and spring-loaded: SL) can potentially assist push-off by substituting for muscle forces using energy stored in a carbon fiber plate or metal spring within the shoe. This study aims to examine how the CF and SL shoes impact walking performance in patients with PAD. A total of ten patients with PAD performed a progressive treadmill test using a pressure-instrumented treadmill for each shoe type: i) standard shoes, ii) CF shoes, and iii) SL shoes. We calculated the peak VGRF for three subjects to date as an average of ten stance phases for the beginning of the walking condition (pain free condition). Preliminary results from three subjects showed that patients with PAD generated a greater peak VGRF wearing CF and SL shoes compared to normal shoes during the heel contact (normal: 0.97±0.10BW, CF: 1.03±0.08BW, and SL: 1.09±0.10BW) and push-off (normal: 0.97±0.06BW, CF: 0.99±0.04BW, and SL: 1.03±0.05BW). In future, we will calculate the VGRF for the remaining patients in pain free and pain conditions and conduct statistical analysis to identify significant differences among shoe types.

Comparison of skin and shoe marker placement on metatarsophalangeal joint kinematics and kinetics during running

This study investigated the effects of marker placement (skin- vs shoe-mounted) on metatarsophalangeal joint (MTP) kinematics and kinetics during running. Fifteen trained men ran on a 15-m track at 10 and 13 km/h with three (low, standard and high stiffness) shoe longitudinal bending stiffnesses (LBS). Reflective markers were fixed on the shoe upper, and on the skin using holes cut in the shoe. Three-dimensional marker positions and ground reaction forces were recorded at 200 and 2000 Hz, respectively. Kinematic and kinetic parameters were analyzed using one-dimensional metrics (statistical parametric mapping). MTP joint was less dorsiflexed at midstance ([57% to 100%] of braking phase and [0% to 48%] of pushing phase), and the MTP joint plantarflexion moment was higher ([22% to 55%] of pushing phase) with the shoe markerset in comparison with the skin markerset. The effect of LBS on MTP angle was found to be significant for a larger percentage of each stride using the shoe markerset compared to the skin markerset. However, the effect of LBS on plantarflexion moment was significant with the shoe markerset only. The effect of running speed on MTP angle was significant for a larger percentage of each stride with the skin markerset. This study demonstrates that the placement of markers influences the measurement of MTP kinematics and kinetics and that these effects are mediated by other variables such as LBS or running speed. It is concluded that the shoe markerset does not fully reflect the movement of the MTP joint.

Evaluation of novel plantar pressure-based 3-dimensional printed accommodative insoles - A feasibility study

BackgroundCustom insoles are commonly prescribed to patients with diabetes to redistribute plantar pressure and decrease the risk of ulceration. Advances in 3D printing have enabled the creation of 3D-printed personalized metamaterials whose properties are derived not only from the base material but also the lattice microstructures within the metamaterial. Insoles manufactured using personalized metamaterials have both patient-specific geometry and stiffnesses. However, the safety and biomechanical effect of the novel insoles have not yet been tested clinically. MethodsIndividuals without ulcer, neuropathy, or deformity were recruited for this study. In-shoe walking plantar pressure at baseline visit was taken and sensels with pressure over 200 kPa was used to define offloading region(s). Three pairs of custom insoles (two 3D printed insoles with personalized metamaterials (Hybrid and Full) designed based on foot shape and plantar pressure mapping and one standard-of-care diabetic insole as a comparator). In-shoe plantar pressure measurements during walking were recorded in a standardized research shoe and the three insoles and compared across all four conditions. FindingsTwelve individuals were included in the final analysis. No adverse events occurred during testing. Maximum peak plantar pressure and the pressure time integral were reduced in the offloading regions in the Hybrid and Full but not in the standard-of-care compared to the research shoe. InterpretationThis feasibility study confirms our ability to manufacture the 3D printed personalized metamaterials insoles and demonstrates their ability to reduce plantar pressure. We have demonstrated the ability to modify the 3D printed design to offload certain parts of the foot using plantar pressure data and a patient-specific metamaterials in the 3D printed insole design. The advance in 3D printed technology has shown its potential to improve current care.

Can Component Size in Total Knee Arthroplasty Be Predicted Preoperatively?-An Analysis of Patient Characteristics.

Accurately predicting component sizing in total knee arthroplasty (TKA) can ensure appropriate implants are readily available, avoiding complications from malsizing while also reducing cost by improving workflow efficiency through a reduction in instrumentation. This study investigated the utility of demographic variables to reliably predict TKA component sizes. A retrospective chart review of 337 patients undergoing primary TKA was performed. Patient characteristics (age, sex, race, height, weight) were recorded along with implant and shoe size. Correlation between shoe size and TKA component size was assessed using Pearson's correlation coefficient and linear regression analysis using three models: (A) standard demographic variables, (B) shoe size, and (C) combination of both models. Shoe size demonstrated the strongest correlation with femoral anteroposterior (FAP) (p < 0.001) followed by height (p < 0.001). Conversely, height exhibited the strongest correlation with tibial mediolateral (TML) (p < 0.001) followed by shoe size (p < 0.001). Model C was able to correctly predict both the femur and tibia within one and two sizes in 83.09 and 98.14% of cases, respectively. Individually, model C predicted the FAP within one and two sizes in 83.09 and 96.14% of cases, and the TML in 98.81 and 100% of cases, respectively. A patient's shoe size demonstrates a strong correlation to the TKA implant size, and when combined with standard demographic variables the predictive reliability is further increased. Here, we present a predictive model for implant sizing based solely on easily attainable demographic variables, that will be useful for preoperative planning to improve surgical efficiency. LEVEL OF EVIDENCE: II, Diagnostic.

Effects of flat-flexible shoes on lower limb joint kinetics and kinematics in gait

Flat-flexible shoes with unique characteristics, such as low pitch and flexibility, can increase the efficiency of ankle energy and running performance. If flat-flexible shoes have the same effect during walking, they could be used for gait training. This study aimed to investigate the effects of flat-flexible shoes on the kinematics and kinetics of the lower limb. Twenty-one healthy young adults (21.8 ± 4.6 years) participated in this study. The participants wore flat-flexible and standard athletic shoes with reflective markers attached according to the Plug-in-Gait model. Walking motion was recorded using infrared cameras and a treadmill embedded with force plates. The angle(s), moment(s), and power(s) of the ankle, knee, and hip joints were calculated. Paired t-test and Wilcoxon’s signed-rank test were used to compare the parameters between the two footwear types. The use of flat-flexible shoes increased maximum ankle dorsiflexion and knee flexion angles. The maximum ankle plantar flexion angle was significantly reduced. There was no significant difference in the joint moment between the two footwear types. The peaks of ankle power absorption in late stance, ankle power generation, and hip power generation significantly increased with the use of flat-flexible shoes. These results suggest that flat-flexible shoes have potential as a tool to promote ankle energy storage and release during gait.

The effect of toe-only rocker sole shoes on gait variability of the elderly.

Gait variability could associate with fall risk in older people. Rocker sole shoes are commonly prescribed to reduce plantar pressure and facilitate forward movement. Thus, it may affect gait stability. The purpose of this study was to investigate the effects of toe-only rocker shoes on gait variability in the elderly. Seventeen healthy elderly participants walked on a treadmill under six different conditions including barefoot (BF), normal shoe (NS), and four types of toe-only rocker sole shoes with various degrees of rocker angle (RS10, RS20, RS30, and RS40). Then the step length variability (SLV), the step time variability (STV), the step width variability (SWV), and the stance time variability were measured. Increasing rocker angle in toe-only rocker did not significantly affect gait variability more than the standard shoe. It seems that different rocker angles in toe-only rocker sole shoes do not pose a threat to gait variability compared to the standard shoes in healthy elderly. Findings of the study suggested that the toe-only rocker sole can be used to facilitate forward progression in the elderly. Further investigation is also required to examine the long-term effects of toe-only rocker sole shoes on gait variability in frail elderly.

482-P: Do Varied Off-Loading Modalities Have Differing Impacts Upon Users' Fall Risk?

Aim: Adherence to offloading devices for diabetic foot ulcers (DFU) is poor and postural instability influences adherence. Prior research suggests an ankle-high removable cast walker (RCW) in tandem with a contralateral shoe lift might increase users’ balance relative to a traditional knee-high RCW without a lift. This study compared compensatory responses to perturbations under both conditions. Methods: Twenty-five individuals (48% male; age: 68±8 years) with diabetic peripheral neuropathy participated. Participants completed trials under three conditions: bilateral standardized shoes, knee-high RCW, and ankle-high RCW with contralateral shoe lift. Stepping thresholds (ST) were assessed for two types of perturbations:1) From a stopped position, a treadmill rapidly accelerated at 3.5m/s² to reach a set peak-velocity and then decelerated and stopped. The smallest peak-velocity to elicit a step was identified as the ST. Participants were separately oriented on the treadmill to elicit anterior and lateral ST; 2) A waist mounted spring scale was pulled until a target load was reached, then the spring was rapidly released. ST was the lowest load necessary to force a step upon release. Anterior and posterior waist-pull perturbations were done.Participants also rated their stability in each footwear condition via a 10cm visual analog scale. Data analyses focused upon the primary comparison of the two offloading conditions. Results: The knee-high RCW resulted in significantly decreased ST for two of the four tests (treadmill anterior: mean difference .037m/s2, p=.048 and anterior waist-pull: mean difference 2.2lbs, p&amp;lt;.001) relative to the ankle-high RCW with a contralateral lift. Participants reported a large and statistically significant reduction in perceived stability with the knee-high RCW (mean difference= 0.93cm, p=0.030) . Conclusions: Future prospective studies should assesses whether the differences noted in this study translate into differences in RCW adherence by patients with DFU. Disclosure R.T.Crews: None. N.J.Rosenblatt: None. Funding National Institute of Diabetes and Digestive and Kidney Disease