Standard Mirror Research Articles

Plane mirror-optical path coupling noise in telescope off-axis system dimensional stability measurement

The dimensional stability of the off-axis optical system affects its optical performance significantly and may even lead to its failure. Here, we report a heterodyne interferometry technology to measure the telescope’s dimensional stability. In this method, the standard plane mirror, which reflects the measurement laser, is a critical structural component. Additionally, it is one of the primary sources of the noise. The study focuses on the impact of the standard plane mirror’s positional misalignment instability on optical path noise. A mathematical model was established to depict the effects of mirror misalignment instability on the optical path, and experiments were conducted to decouple the noise. The results of the experiment show that the standard plane mirror introduces approximately 1nm/Hz1/2 at 10 mHz of optical path noise into the off-axis system, and the dimensional stability of the off-axis system is about 6.23nm/Hz1/2 at 10 mHz.

Spatiotemporal walk-off and improved focusing of plasma THz sources.

High-field THz sources with peak field strengths exceeding MV/cm are essential for nonlinear THz spectroscopy and coherent control of matter on ultrafast time scales. Two-color femtosecond laser plasma sources employing long filamentation have been reported as providing single-cycle, >MV/cm fields, with multi-decade spanning bandwidth and polarization control, making them promising sources for such experiments. In this work, we report the observation of spatiotemporal spreading of the THz pulse when standard off-axis parabolic mirrors are used for collection and focusing of long filament plasma-based THz pulses. This produces a flying focus for THz light, with the axial focal region propagating at a velocity of 1/3 the speed of light. The THz emission is then subsequently spread over a temporal width of ∼10 ps, approximately 100 times the THz pulse duration detected by electro-optic sampling at any single point along the focus. The consequences of this non-ideal focusing are a potential and drastic overestimation of the peak THz electric field based on energy measurements, as well as significant phase noise arising from beam pointing fluctuations. We show that this spatiotemporal spreading can be minimized using a simple axicon lens that perfectly collimates the extended filament source, resulting in improved spatial and temporal focusing of the THz pulse.

All-optical phase conjugation using diffractive wavefront processing

Optical phase conjugation (OPC) is a nonlinear technique used for counteracting wavefront distortions, with applications ranging from imaging to beam focusing. Here, we present a diffractive wavefront processor to approximate all-optical phase conjugation. Leveraging deep learning, a set of diffractive layers was optimized to all-optically process an arbitrary phase-aberrated input field, producing an output field with a phase distribution that is the conjugate of the input wave. We experimentally validated this wavefront processor by 3D-fabricating diffractive layers and performing OPC on phase distortions never seen during training. Employing terahertz radiation, our diffractive processor successfully performed OPC through a shallow volume that axially spans tens of wavelengths. We also created a diffractive phase-conjugate mirror by combining deep learning-optimized diffractive layers with a standard mirror. Given its compact, passive and multi-wavelength nature, this diffractive wavefront processor can be used for various applications, e.g., turbidity suppression and aberration correction across different spectral bands.

Coherent diffractive imaging with twisted X-rays: Principles, applications, and outlook

Recent technological breakthroughs in synchrotron and x-ray free electron laser facilities have revolutionized nanoscale structural and dynamic analyses in condensed matter systems. This review provides a comprehensive overview of the advancements in coherent scattering and diffractive imaging techniques, which are now at the forefront of exploring materials science complexities. These techniques, notably Bragg coherent diffractive imaging and x-ray photon correlation spectroscopy, x-ray magnetic dichroism, and x-ray correlation analysis leverage beam coherence to achieve volumetric three-dimensional imaging at unprecedented sub-nanometer resolutions and explore dynamic phenomena within sub-millisecond timeframes. Such capabilities are critical in understanding and developing advanced materials and technologies. Simultaneously, the emergence of chiral crystals—characterized by their unique absence of standard inversion, mirror, or other roto-inversion symmetries—presents both challenges and opportunities. These materials exhibit distinctive interactions with light, leading to phenomena such as molecular optical activity, chiral photonic waveguides, and valley-specific light emissions, which are pivotal in the burgeoning fields of photonic and spintronic devices. This review elucidates how novel x-ray probes can be leveraged to unravel these properties and their implications for future technological applications. A significant focus of this review is the exploration of new avenues in research, particularly the shift from conventional methods to more innovative approaches in studying these chiral materials. Inspired by structured optical beams, the potential of coherent scattering techniques utilizing twisted x-ray beams is examined. This promising direction not only offers higher spatial resolution but also opens the door to previously unattainable insights in materials science. By contextualizing these advancements within the broader scientific landscape and highlighting their practical applications, this review aims to chart a course for future research in this rapidly evolving field.

The safety and efficacy of Sotn ureteroscopy for renal and upper ureteral calculi: a prospective multicenter randomized controlled trial.

Sotn ureteroscopy is a new lithotripsy procedure developed on the basis of ureteroscopy and includes a rigid ureteral access sheath, standard mirror, lithotripsy mirror, and Sotn perfusion aspirator. Thus, we performed a prospective multicenter randomized controlled trial comparing the safety and efficacy of Sotn ureteroscopy in the treatment of renal and upper ureteral calculi. In this study, 224 patients with renal and upper ureteral calculi were randomly divided equally into study and control groups from March 2018 to March 2022. All the patients were approved by the hospital ethics committee (proof number: ZF-2018-164-01 and ZF-2018-165-01) of the Second Affiliate Hospital of Guangzhou University of Chinese Medicine in China. The primary outcome was stone-free rate (SFR) assessed by computed tomography on the 1st day and month after treatment and operation duration. The secondary outcome was postoperative complication rate. In total, for upper ureteral calculi, the SFR of 1 day after operation of the Sotn ureteroscopy group was significantly higher than the rigid ureteroscopy group (83.6% vs. 60%, P=0.006). Moreover, operative time (33.7±1.80 vs. 52.9±2.73 min, P<0.005) of the Sotn ureteroscopy group was significantly lower than the rigid ureteroscopy group. Additionally, the SFR of 1 day after operation and operative time for the study group (Sotn ureteroscopy combined with flexible ureteroscopy) and the control group (flexible ureteroscopy alone) were 63.2% and 36.8% (P=0.005), 65.6±4.06 and 80.3±4.91 (P=0.023), respectively. However, there were no significant differences in the SFR of 1 month after operation, success rate of ureteral access sheath placement, and postoperative complications between the two groups (P>0.05). In subgroups with stone diameters ≥1.5 cm and stone CT values ≥1000 Hounsfield units, Sotn ureteroscopy showed more advantages in terms of the SFR of 1 day after operation. Importantly, complications such as ureteral injury, sepsis, fever, and severe hematuria were not statistically different between the two groups (P>0.05). For renal and upper ureteral calculi, Sotn ureteroscopy has the advantage of a higher SFR of 1 day after the operation and a shorter operative time, suggesting that the Sotn ureteroscopy may have further potential applications in clinics.

Design of Parabolic Off-Axis Reflector Optical System for Large Aperture Single Star Simulators

This study proposes a parabolic off-axis reflective optical system design method to reduce the wave aberration of the optical system of a large aperture single star simulator and improve the optical system’s imaging quality. Firstly, we determined the design indexes of the optical system of the large aperture single star simulator by analyzing the technical indexes of the star sensitizer and the development status of the single star simulator; secondly, the initial structural parameters of the optical system were calculated based on the theory of primary aberration; then, we carried out the design optimization of the optical system, the image quality evaluation, and the tolerance analysis using Zemax software; finally, the study tested the wave aberration of the optical system by using the four-dimensional interferometer and the standard mirror together. The simulation results of the optical system are as follows: in the entire field of view, the aberration of the optical system is far less than 0.002%, the modulation transfer function (MTF) reaches the diffraction limit, and the maximum wave aberration is 0.0324 λ. The experimental results are as follows: the maximum wave aberration of the optical system is 0.0337 λ, which is less than 1/25 λ, and it meets the requirements of the index. The simulation and experimental results show that the optical system of the large aperture single star simulator designed by this method has good imaging quality and a simple system structure.

Key Considerations in Assessing the Safety and Performance of Camera-Based Mirror Systems

Camera-based mirror systems (CBMSs) are a relatively new technology in the automotive industry, and much of the United States’ medium- and heavy-duty commercial fleet has been reluctant to convert from standard glass, or “west coast”, mirrors to CBMSs. CBMSs have the potential to reduce the number of truck and passenger vehicle incidents, improving overall fleet safety. CBMSs also have the potential to improve operational efficiency by improving aerodynamics and reducing drag, resulting in better fuel economy, and improving maneuverability. Improvements in overall safety are also possible; the field of view for the driver is potentially 360° with the addition of trailer cameras, allowing for visibility of the rear of the trailer and the front of the truck. These potential improvements seem promising, but the literature on driver surveys clearly shows that there is reluctance to adopt this technology for many reasons. Additionally, more robust testing in the laboratory and in the field is necessary to determine whether CBMSs are adequate to replace standard mirrors on trucks. This analysis provides an overview of key research questions for CBMS testing based on the current literature on the topic (surveys, standards, and previous testing). The purpose of this analysis is to serve as guidance in developing further testing of CBMSs, especially testing involving human subjects.

Chemical and Mechanical Characterization of the Alternative Kriab-Mirror Tesserae for Restoration of 18th to 19th-Century Mosaics (Thailand).

Kriab-mirror tesserae are a type of lead-coated mosaic mirror found in most archaeological sites and antiquities dating back to the 18th century in central Thailand. The need for restoration work has prompted the search for alternative mirrors with similar characteristics to the ancient ones. Prototypes of alternative lead-coated mirrors were successfully used to restore a variety of archaeological sites and artifacts, demonstrating their potential application in heritage conservation and restoration work. We investigated the selected ancient Kriab samples in terms of their composition in both glass and reflective coating layers, as well as the chemical and mechanical characterization of the selected alternative Kriab mirrors. We employed a standard lab-shear test, which proved difficult to evaluate due to failure not occurring between the glass-to-metal interfaces. However, a modified lab-shear specimen setup was used to elucidate the peel-off bonding behavior of the lead-to-glass interface. Additionally, we measured the L*, a*, and b* values in the CIE-Lab standard, which exhibited variations for each colored Kriab mirror. The %reflectance of the selected ancient and alternative Kriab mirrors was highly similar when lower than a high %reflectance of a standard silvering mirror. Thai professional conservators have embraced the use of alternative Kriab mirrors in restoration projects as a replacement for old Kriab mirrors, as they are more compatible in terms of color and avoid the excessive brightness of silvered colored mirrors. However, the weathering durability of the alternative mirrors was poor due to the leaching of alkaline and lead ions caused by hydrolytic attack on the poor chemical stability separated phase. Overall, our research provides valuable insights into the properties and qualities of both ancient and alternative Kriab mirrors, which will be useful in the further development of mirrors with more resembling properties or even more environmentally friendly Kriab mirrors and their potential applications in restoration work in Thailand and archaeological sites in Asia.

Design of Pauci-Adaptive, Spirally Tiled Mirrors for Large Size Optical Vortex Generation

We propose the optical design of an adaptive and flexible 4-quadrant, or N-facet, spirally tiled mirror setup, to generate an optical vortex on large diameter laser systems. From a far-field analysis, we derive the optimal angular parameters that generate the highest contents of the targeted Laguerre-Gaussian mode. The modal purities thus obtained are close to those obtained with standard segmented spiral phase plates or mirrors. The intensity behavior in the focal Rayleigh zone is regular, and the effect of a small laser astigmatism, known to break the circularity of the ring intensity profile at focus, can be corrected. This pauci-adaptive faceted mirror setup appears well suited for use on ultra-high intensity or high energy laser systems.

Mirror Surface Nanostructuring via Laser Direct Writing—Characterization and Physical Origins

AbstractThe addition of an optically absorptive layer to otherwise standard dielectric mirrors enables a set of laser direct writing nanostructuring methods that can add functionality to such mirrors while retaining their high reflectivity. A thorough characterization of this method is given in this paper, and its physical origins are investigated. In particular, these measurements show that laser direct writing of such mirrors has a reversible and a permanent component. The reversible process originates from the thermal expansion of the surface and allows a simple yet precise way to temporarily modify the shape of the mirror. Scanning electron microscope cross‐sectional images suggest that the permanent part of the nanostructuring process is due to thermally induced pore formation and enlargement in the tantalum oxide layers of the used dielectric mirror.

Machine Learning Based Implementation of Home Automation Using Smart Mirror

When ordered, it may be folded in half quickly and effortlessly. IoT (Internet of Things) technology drives the Smart Mirror's functionality. Standard mirror functionality is included, in addition to showing the user's social notifications, daily tasks, weather updates, breaking news, reminders, voice assistant notifications, and smartphone notifications. The Smart Mirror is connected to the Raspberry Pi-based network through Wi-Fi. A two-way mirror or an acrylic mirror sheet is used with the Raspberry-Pi mainboard to conceal the Mirror's rear end from the user. It supports modules written in any programming language. When Python is used as the primary programming language, these changes take care of the hardware and software limitations. This work discusses the creation and building of the Mirror in appropriate manner. In addition, possible uses of the Mirror are discussed. Compared to this DIY method, the cost is substantially lower, and the result is more predictable. The result produced by the support vector machine classifier are of accuracy which is 84% for detecting theft, and the confusion matrix is often diagonal, showing that this classifier can accurately labelled the data. Similarly, F1 score of 0.82% shows that there are a few false positives and false negatives, which is a favorable indicator.

Prevalence of Dental Trauma and Their Relationship to Risk Factors among 8-15-Year-Old School Children.

Tooth injuries lead to functional, aesthetic, and psychological disorders, accompanied by the great concern of the child, the parents, and the dentist. (a) To assess the prevalence of traumatic dental injury (TDI) and its relationship to risk variables among 8-15-year-old school children in Mahbubnagar, India. (b) To collect baseline data as there are limited reports of TDI studies in South India to date. A cross-sectional study was conducted among 6643 children from 78 schools in Mahbubnagar using a multilevel random sampling method. The permanent incisors were examined according to the WHO classification using a standard oral mirror and probe. Individuals with clinical evidence of trauma were asked about the details of the injury event using a structured questionnaire. The chi-square test analyzed the distribution of all measurements in this study with a statistical significance of 0.05. Among the 6643 children from the 78 schools surveyed, 9.3% experienced TDI. TDI occurred in 68% of boys, which was about twice as high in girls at 32%. The most commonly affected teeth were the maxillary central incisors. A higher number of children with an incisal overjet more significant than 3 mm had TDI than the children less than 3 mm, although this difference was not statistically significant. The lip closure incompetence was more common in children with TDI. The most frequent causes of TDI were falls, and the site of occurrence was school. Type I fractures were the most prevalent and most went untreated. The high level of dental trauma and the low percentage of children with trauma seeking treatment emphasize the need for greater awareness among the Mahbubnagar children.

The effect of mirror therapy on joint movement, pain and functionality in acute upper limb burns

ObjectiveMirror therapy is aimed at developing a normal proprioceptive perception for the area with pain or movement restriction by making use of the person's monitoring of the healthy side movements thanks to the mirror's reflective feature. The aim of this study is to investigate the effect of mirror therapy on joint range of motion, pain and functionality in acute upper extremity burn injuries. MethodsDemographic and burn-specific data of individuals with upper extremity burns were recorded. Individuals were divided into two groups. Standard treatment was applied to the first group, and mirror treatment in addition to the standard treatment was applied to the second group for 30 sessions, 5 days a week for 6 weeks. In the standard treatment program, passive, active-assisted and active ROM, strengthening, stretching, resistant and functional exercises were applied. In the mirror therapy group, active exercises were performed on the healthy side by covering the burn area in the mirror box. Before and after the treatment, joint range of motion(ROM) was evaluated with Universal Goniometer, pain intensity was evaluated with Visual Analog Scale and upper extremity functions were evaluated with QuickDASH. ResultsA total of 32 (23 Male, 9 Female) individuals between the ages of 18–65 were included. The mean total burn surface area was 12.93 ± 9.80 in the standard treatment and 6.12 ± 2.96 in the mirror treatment. The groups were similar in terms of ROM change (p > 0.05). The pretest/posttest pain scores of both the standard therapy and mirror therapy groups were similar (p > 0.05). There was no statistically significant difference in terms of pretest and posttest QuickDASH scores according to the groups (p > 0.05). The difference between the pretest/posttest QuickDASH scores of both Standard treatment and Mirror treatment groups was statistically significant. ConclusionThis study showed that the standard physiotherapy and rehabilitation program applied in the acute period in upper extremity burns and the mirror treatment applied in addition to this program provide similar improvements in joint range of motion and pain.

The effect of mirror therapy can be improved by simultaneous robotic assistance.

Background:Standard mirror therapy (MT) is a well-established therapy regime for severe arm paresis after acquired brain injury. Bilateral robot-assisted mirror therapy (RMT) could be a solution to provide visual and somatosensory feedback simultaneously.Objective:The study compares the treatment effects of MT with a version of robot-assisted MT where the affected arm movement was delivered through a robotic glove (RMT).Methods:This is a parallel, randomized trial, including patients with severe arm paresis after stroke or traumatic brain injury with a Fugl-Meyer subscore hand/finger < 4. Participants received either RMT or MT in individual 30 minute sessions (15 sessions within 5 weeks). Main outcome parameter was the improvement in the Fugl-Meyer Assessment upper extremity (FMA-UE) motor score. Additionally, the Motricity Index (MI) and the FMA-UE sensation test as well as a pain scale were recorded. Furthermore, patients’ and therapists’ experiences with RMT were captured through qualitative tools.Results:24 patients completed the study. Comparison of the FMA-UE motor score difference values between the two groups revealed a significantly greater therapy effect in the RMT group than the MT group (p = 0.006). There were no significant differences for the MI (p = 0.108), the FMA-UE surface sensibility subscore (p = 0.403) as well as the FMA-UE position sense subscore (p = 0.192). In both groups the levels of pain remained stable throughout the intervention. No other adverse effects were observed. The RMT training was well accepted by patients and therapists.Conclusions:The study provides evidence that bilateral RMT achieves greater treatment benefit on motor function than conventional MT. The use of robotics seems to be a good method to implement passive co-movement in clinical practice. Our study further demonstrates that this form of training can feasibly and effectively be delivered in an inpatient setting.

Early Prediction of Dental Caries using Hormonal Fingerprint in 6-12 Years Old Children: A Cross-sectional Study.

BackgroundThe ratio between second and fourth digit lengths (2D:4D ratio) is termed as hormonal fingerprint. Second and fourth digit lengths ratio is used as a biological marker for predicting and diagnosis of many metabolic disorders mainly coronary heart disease and autism, whereas, in dentistry, this method is still in blooming stage. The aim of the study was to assess the relationship between the new biological marker–hormonal fingerprints in the early detection of caries in children.MethodologyA total of 250 children were randomly selected from both sexes of the age group 6–16 years. Caries assessment was done using standard mouth mirrors and community periodontal index probes. Caries status (deft and DMFT) was recorded and subjects with a total DMFT/deft score of >5 were considered to have a high caries rate. The hormonal fingerprint was made by measuring the length ratio of the index and ring finger with the help of vernier caliper. The entire study population was divided into children with 2D:4D ratio less than 1 and ≥1 based on the calculations of 2D:4D.ResultsThe results showed that 79.67% males and 29.92% females have 2D:4D ratio <1 and 70.07% females and 20.32% males have 2D:4D ≥1. There is negative correlation between caries incidence and 2D:4D ratio. Children with low 2D:4D ratio have high caries index (54.4%) and high 2D:4D ratio have low caries index (45.6%), which is statistically significant.ConclusionThe study confirms a positive correlation between low 2D:4D ratio and high caries, which could be used as an early biological predictor of dental caries.How to cite this articleBeegum F, Khan N, George S, et al. Early Prediction of Dental Caries using Hormonal Fingerprint in 6–12 Years Old Children: A Cross-sectional Study. Int J Clin Pediatr Dent 2022;15(3):247-250.

Improvement of the focusability of petawatt laser pulses after nonlinear post-compression

The nonlinear nature of laser pulse post-compression inevitably leads to wavefront distortions. These distortions are nonstationary, i.e., they vary during the pulse, which significantly complicates the use of adaptive optics. We propose four approaches to compensation of wavefront distortions by means of standard adaptive mirrors, three of which can be implemented experimentally. Numerical simulations show that these approaches allow achieving a focal spot intensity close to the case of a perfectly flat wavefront.

Alignment technology based on a central small aperture for the AIMS telescope.

The accurate infrared solar magnetic field measurement system (AIMS) is a 1 m off-axis Gregorian alt-azimuth solar telescope and will be dedicated to measuring the solar magnetic field in mid-infrared. How to align the large-aperture off-axis system is a significant issue. Sub-aperture stitching with the small-aperture standard flat mirror can be applied to the alignment of the large-aperture off-axis system. However, this method is time-consuming and inefficient. We propose an alignment method based on the Zernike polynomials of the central small aperture to solve the low efficiency of sub-aperture stitching. Theoretical simulation shows that the RMS residual error of the system after using the central small-aperture alignment method will be less than 4.5∗10-6λ at 632.8 nm. Practical alignment suggests that our method can make the RMS value of full-aperture wave aberration quickly converge to 0.12λ at 632.8 nm. Compared with the sub-aperture stitching method, our method can significantly reduce the times of sub-aperture stitching and save the alignment time.

Monolithic Integration of Multi-Spectral Optical Interference Filter Array on Thin Film Amorphous Silicon Photodiodes

Hydrogenated amorphous silicon thin film photodetectors combined with optical filters are routinely used for biological detection applications based on fluorescence. Monolithic integration of these filters to the photodetectors further enhances the portability and simplicity of the system. However, due to the multitude of fluorophores used in such applications, it is often necessary to combine multiple filters in a single chip for increased ease of application and portability of the system. In this work, we report a novel facile technique to integrate multiple filters in a chip with four photodiodes, in an innovative methodology that leverages the beneficial characteristics of different types of deposition techniques to fabricate precise multilayer interference filters. Ion beam deposited MgO layers with different thicknesses are successively patterned by lift-off and sandwiched between two standard dielectric mirrors deposited via plasma-enhanced chemical vapor deposition to produce the filter array. The successful integration of the devices is demonstrated through fluorescence measurements of grape fluorescence at two different wavelengths which are utilized in grape maturation monitoring in the viticulture sector.

A new method to measure spectral reflectance and film thickness using a modified chromatic confocal sensor

A chromatic confocal sensor is modified to measure the spectral reflectance of nontransparent surfaces or transparent thin films. According to the Fresnel formula, specular reflectance depends on the wavelength, refractive indexes of the media around the reflecting interface, angle of incidence, and also the thickness of (thin) films. To provide a constant angle of incidence, a suitably designed annular aperture is installed in the dispersion probe. In this way, it is possible to generate a conic incident beam onto the reflecting interface. Furthermore, a self-reference method is used to acquire the reflected spectrum using a continuous scan across the dispersion range. Then, the spectral reflectance is calculated based on a comparison with a standard mirror with known spectral reflectance. The experimental results show a reflectance measurement error of about ±0.05 within the spectral range from 445 nm to 645 nm. Furthermore, the thicknesses of several silicon-dioxide films on silicon substrates were determined by fitting the measured spectral reflectance with the theoretical spectral reflectance. The repeatability of the measurement is within about 0.6 nm, and the results agree with the ellipsometry and commercial film thickness gauge. When the scan speed is set to 0.05 mm/s, 0.1 mm/s, 0.2 mm/s, and 0.4 mm/s, the measured thicknesses change slightly (<0.22 nm), which means there is still a significant potential to enhance the measurement efficiency. Finally, the film thickness topography is obtained to determine the uniformity of the film. Overall, the proposed method has a big potential for the measurement of spectral reflectance and film thickness.

Surface quality control of thin SiN layer by optical measurements

Fiber optic interferometers have a wide range of applications including biological and chemical measurements. Nevertheless, in case of a reflective interferometer setup, standard silver mirrors cannot be used in every measurement, due to their chemical activity. In this work, we investigate the surface quality of a thin optical layer of silicon nitride (SiN) which can serve as an alternative material for silver mirrors. We present measurements carried out with a Fabry-Perot fiber optic interferometer working in a reflective mode. Measurement results allow us to determine the surface quality of the investigated layer. Full Text: PDF ReferencesK. Karpienko, M.S. Wróbel, M. Jedrzejewska-Szczerska, "Determination of refractive index dispersion using fiber-optic low-coherence Fabry-Perot interferometer: implementation and validation", Opt Express, 53, 077103 (2014). CrossRef Jedrzejewska-Szczerska M., Gnyba M., Kosmowski B. B. "Low-coherence fibre-optic interferometric sensors", Acta Phys. Pol. A 120, 621 (2011). CrossRef M. Jedrzejewska-Szczerska "Response of a new low-coherence Fabry-Perot sensor to hematocrit levels in human blood",Sensors 14(4), 6965 (2014). CrossRef M. Kosowska, D. Majchrowicz, K.J. Sankaran, M. Ficek, K. Haenen, M. Szczerska, "Doped Nanocrystalline Diamond Films as Reflective Layers for Fiber-Optic Sensors of Refractive Index of Liquids", Materials 12, 2124 (2019). CrossRef Shou-YiChang, Yi-Chung Huang, "Analyses of interface adhesion between porous SiO2 low-k film and SiC/SiN layers by nanoindentation and nanoscratch tests", Microelectron. Eng. 84(2), 319 (2007). CrossRef X. Wang, C. Wang, X. Shen, F. Sun, "Potential Material for Fabricating Optical Mirrors: Polished Diamond Coated Silicon Carbide". Appl. Opt. 56, 4113 (2017). CrossRef G. Coppola, P. Ferraro, M. Iodice, S. De Nicola, "Method for measuring the refractive index and the thickness of transparent plates with a lateral-shear, wavelength-scanning interferometer", Appl. Opt. 42, 3882 (2003). CrossRef H. Mäckel, R. Lüdemann, "Detailed study of the composition of hydrogenated SiNx layers for high-quality silicon surface passivation", J. Appl, Phys. 92, 2602 (2002). CrossRef N. Atman, M. Krzywinski, "Visualizing samples with box plots", Nat. Methods, 11(2), 119 (2014). CrossRef M. Vignesh, R. Balaji, "Data analysis using Box and Whisker Plot for Lung Cancer", International Conference on Innovations in Power and Advanced Computing Technologies,(2017). CrossRef