Stability Of Secondary Structural Elements Research Articles

ELECTRONIC PARAMETERS OF CONFORMATIONAL STATES OF ABETA-AMYLOID PEPTIDE (25-35)

ELECTRONIC PARAMETERS OF CONFORMATIONAL STATES OF ABETA-AMYLOID PEPTIDE (25-35)

Deprotonation of a Single Amino Acid Residue Induces Significant Stability in an α-Helical Heteropeptide.

Stability of secondary structural elements is an integral component of a structurally stable protein. Presence of protons in the residue sequence and their immediate environment play a significant role in conformational stability. In this study, we show that removing a proton from a single amino acid residue significantly increases the stability of an α-helical heteropeptide in comparison with the unprotonated form. Far-UV circular dichroism spectroscopy, fluorescence spectroscopy, fluorescence energy transfer measurements, and over 10 μs of all-atom molecular dynamics simulations are used to provide an atomically detailed characterization of this event. There is a single histidine residue in the studied α-helical peptide sequence toward the N-terminal that interacts with a tryptophan located four residues away and quenches the fluorescence when protonated. Removing a proton from this histidine residue dequenches the tryptophan fluorescence and contributes to a significant increase in the helix stability. Atomically detailed analysis of individual residue conformations shows that the protonated histidine tends to be in closer proximity to the tryptophan, which correlates with higher helix content in the N and C termini and lower helix content in the central region of the peptide. In the presence of a neutral histidine, when tryptophan fluorescence is no longer quenched and histidine moves further away from tryptophan, the helix content remains mostly unchanged in the N-and-C termini and significantly increases in the central region. Our results strongly suggest that interactions of the tryptophan with a protonated histidine downregulate the helix population in the central segment of the helical structure compared to a neutral histidine residue. Upregulation of helix population of the central segment of this α-helical heteropeptide in the presence of a neutral histidine residue significantly increases the peptide structural stability.

Probing the Free Energy Landscape of the Fast-Folding gpW Protein by Relaxation Dispersion NMR

The topographic features of the free energy landscapes that govern the thermodynamics and kinetics of conformational transitions in proteins, which in turn are integral for function, are not well understood. This reflects the experimental challenges associated with characterizing these multidimensional surfaces, even for small proteins. Here we focus on a 62-residue protein, gpW, that folds very rapidly into a native structure with an α/β topology in which α-helices are at the N- and C-terminal ends of the molecule with a central β-hairpin positioned orthogonally to the helices. Using relaxation dispersion NMR spectroscopy to probe the conformational fluctuations in gpW at 1 °C, we found that the native state interconverts with a transiently formed, sparsely populated second state with a lifetime of 250 μs, consistent with the global folding-unfolding rate under these conditions. In this low-populated state, the β-hairpin is unfolded whereas the α-helices remain predominantly formed. Our results argue for a hierarchical stability of secondary structural elements and demonstrate the existence of a complex free energy landscape even in this small, fast-folding single-domain protein.

Use of Enveloping Distribution Sampling to Evaluate Important Characteristics of Biomolecular Force Fields

The predictive power of biomolecular simulation critically depends on the quality of the force field or molecular model used and on the extent of conformational sampling that can be achieved. Both issues are addressed. First, it is shown that widely used force fields for simulation of proteins in aqueous solution appear to have rather different propensities to stabilize or destabilize α-, π-, and 3(10)- helical structures, which is an important feature of a biomolecular force field due to the omni-presence of such secondary structure in proteins. Second, the relative stability of secondary structure elements in proteins can only be computationally determined through so-called free-energy calculations, the accuracy of which critically depends on the extent of configurational sampling. It is shown that the method of enveloping distribution sampling is a very efficient method to extensively sample different parts of configurational space.

Impact of Covalent Modifications on Binding and Conformational Propensities of Histone Tails

Histone tails are highly flexible N terminal protrusions of histone proteins which help to fold DNA into dense superstructures known as chromatin. On a molecular scale histone tails are polyelectrolites with high degree of conformational disorder, allowing them to function as bio-molecular ”switches”, regulating various genetic regulatory processes via diverse types of covalent modifications. Because of being intrinsically disordered, the structural and dynamical aspects of histone tails are still poorly understood. In this work we have investigated the impact of experimentally well studied covalent modifications on conformational and DNA-binding propensities of H4/H3 histone tails(methylation/acetylation respectively). We carried out long time REMD simulations on wild-type and covalently modified forms of H4/H3 tails in presence of explicit water and ions. Our results demonstrated how covalent perturbations impact the stability of secondary structural elements that are present in the wild-type forms. We reconciled some of our previous results with in vivo experiments by probing DNA-binding energy landscapes of H4 and H3 tails showing that in presence of DNA intrinsic conformational preferences are well preserved, which is manifested in formation of fairly similar secondary structural elements upon binding. Our results also showed that binding free energy gain is sufficiently small(∼3kT) to set dynamic equilibrium between DNA-bound and unbound states. Additionally we have computed the free energy profiles of DNA binding for wild and covalently modified forms finding a correlation between binding strength and change in stability of the chromatin fiber that takes place upon covalent modification of H3/H4 histone tails.

Reconstruction and Stability of Secondary Structure Elements in the Context of Protein Structure Prediction

Efficient and accurate reconstruction of secondary structure elements in the context of protein structure prediction is the major focus of this work. We present a novel approach capable of reconstructing α-helices and β-sheets in atomic detail. The method is based on Metropolis Monte Carlo simulations in a force field of empirical potentials that are designed to stabilize secondary structure elements in room-temperature simulations. Particular attention is paid to lateral side-chain interactions in β-sheets and between the turns of α-helices, as well as backbone hydrogen bonding. The force constants are optimized using contrastive divergence, a novel machine learning technique, from a data set of known structures. Using this approach, we demonstrate the applicability of the framework to the problem of reconstructing the overall protein fold for a number of commonly studied small proteins, based on only predicted secondary structure and contact map. For protein G and chymotrypsin inhibitor 2, we are able to reconstruct the secondary structure elements in atomic detail and the overall protein folds with a root mean-square deviation of <10 Å. For cold-shock protein and the SH3 domain, we accurately reproduce the secondary structure elements and the topology of the 5-stranded β-sheets, but not the barrel structure. The importance of high-quality secondary structure and contact map prediction is discussed.

Essential Role for Pro21 in Phospholamban for Optimal Inhibition of the Ca-ATPase

We have investigated the functional role of the flexible hinge region centered near the sequence TIEMP(21), which connects the N-terminal cytosolic and C-terminal membrane-spanning helical domains of phospholamban (PLB). Specifically, we ask if the conformation of this region is important to attain optimal inhibitory interactions with the Ca-ATPase. A genetically engineered PLB mutant was constructed in which Pro(21) was mutated to an alanine (P21A-PLB(C)); in this construct, all three transmembrane cysteines were substituted with alanines to stabilize the monomeric form of PLB, and a unique cysteine was introduced at position 24 near the hinge element (A24C), permitting the site-specific attachment of fluorescein-5-maleimide (FMal) to monitor structure changes. In agreement with prior measurements in cardiac SR microsomes, the calcium concentration associated with half-maximal activation (Ca(1/2)) of the Ca-ATPase, 290 +/- 10 nM, is shifted to 580 +/- 20 nM when co-reconstituted with PLB(C) (Pro21) as a result of a reduction in the cooperativity associated with the calcium-dependent structural transition. Kinetic simulations indicate that PLB(C) association with the Ca-ATPase results in a 75% reduction in the equilibrium constant associated with the formation of the second high-affinity calcium binding site. In comparison, there is a 43% reduction in KCa(1/2) upon reconstitution of the Ca-ATPase with P21A-PLB(C), which can be simulated by decreasing the equilibrium constant associated with the calcium-dependent structural activation by 50%. The diminished inhibitory action of P21A-PLB(C) is associated with alterations in the structure of the hinge element, as evidenced by the diminished solvent accessibility of FMal relative to the native structure. Likewise, increases in the alpha-helical content and decreases in the mobility of the carboxyl-terminal domain of P21A-PLB(C) are observed using circular dichroism and fluorescence spectroscopy. Collectively, these results indicate that the overall dimensions of the carboxyl-terminal domain of PLB are increased through a stabilization of secondary structural elements upon mutation in P21A-PLB(C) that result in a reduction in the ability of the amino-terminal cytosolic portion of PLB to productively inhibit the Ca-ATPase. Further, these results suggest that the unstructured characteristics of the flexible hinge region in PLB are critical for optimal inhibitory interactions with the Ca-ATPase and suggest its role as a conformational switch.

Helix stability and hydrophobicity in the folding mechanism of the bacterial immunity protein Im9

Recent models suggest that the mechanism of protein folding is determined by the balance between the stability of secondary structural elements and the hydrophobicity of the sequence. Here we determine the role of these factors in the folding kinetics of Im9* by altering the secondary structure propensity or hydrophobicity of helices I, II or IV by the substitution of residues at solvent exposed sites. The folding kinetics of each variant were measured at pH 7.0 and 10 degrees C, under which conditions wild-type Im9* folds with two-state kinetics. We show that increasing the helicity of these sequences in regions known to be structured in the folding intermediate of Im7*, switches the folding of Im9* from a two- to three-state mechanism. By contrast, increasing the hydrophobicity of helices I or IV has no effect on the kinetic folding mechanism. Interestingly, however, increasing the hydrophobicity of solvent-exposed residues in helix II stabilizes the folding intermediate and the rate-limiting transition state, consistent with the view that this helix makes significant non-native interactions during folding. The results highlight the generic importance of intermediates in folding and show that such species can be populated by increasing helical propensity or by stabilizing inter-helix contacts through non-native interactions.

Atomic Force Microscopy of Biological Samples

AbstractThe atomic force microscope (AFM) allows biomolecules to be observed and manipulated under native conditions. It produces images with an outstanding signal-to-noise ratio and addresses single molecules while the sample is in a buffer solution. Progress in sample preparation and instrumentation has led to topographs that reveal subnanometer details and the surface dynamics of biomolecules. Tethering single molecules between a support and a retracting AFM tip produces force–extension curves, giving information about the mechanical stability of secondary structural elements. For both imaging and force spectroscopy, the cantilever and its tip are critical:the mechanical properties of the cantilever dictate the force sensitivity and the scanning speed, whereas the tip shape determines the achievable lateral resolution.

Unfolding pathways of native bacteriorhodopsin depend on temperature.

The combination of high-resolution atomic force microscopy (AFM) imaging and single-molecule force-spectroscopy was employed to unfold single bacteriorhodopsins (BR) from native purple membrane patches at various physiologically relevant temperatures. The unfolding spectra reveal detailed insight into the stability of individual structural elements of BR against mechanical unfolding. Intermittent states in the unfolding process are associated with the stepwise unfolding of alpha-helices, whereas other states are associated with the unfolding of polypeptide loops connecting the alpha-helices. It was found that the unfolding forces of the secondary structures considerably decreased upon increasing the temperature from 8 to 52 degrees C. Associated with this effect, the probability of individual unfolding pathways of BR was significantly influenced by the temperature. At lower temperatures, transmembrane alpha-helices and extracellular polypeptide loops exhibited sufficient stability to individually establish potential barriers against unfolding, whereas they predominantly unfolded collectively at elevated temperatures. This suggests that increasing the temperature decreases the mechanical stability of secondary structural elements and changes molecular interactions between secondary structures, thereby forcing them to act as grouped structures.

Lipid binding ability of human apolipoprotein E N-terminal domain isoforms: correlation with protein stability?

Human apolipoprotein (apo) E exists as one of three major isoforms, E2, E3 or E4. Individuals carrying the ε4 allele have an increased risk of heart disease and premature onset of Alzheimer's disease. To investigate the molecular basis for this phenomenon, the N-terminal domain of apoE3, apoE2 and apoE4 were expressed in bacteria, isolated and employed in lipid binding and stability studies. Far UV circular dichroism spectroscopy in buffer at pH 7 revealed a similar amount of α-helix secondary structure for the three isoforms. By contrast, differences were noted in apoE-NT isoform-specific transformation of bilayer vesicles of dimyristoylphosphatidylglycerol (DMPG) into discoidal complexes. ApoE4-NT induced transformation was most rapid, followed by apoE3-NT and apoE2-NT. To determine if differences in the rate of apoE-NT induced DMPG vesicle transformation is due to isoform-specific differences in helix bundle stability, guanidine HCl denaturation studies were conducted. The results revealed that apoE2-NT was the most stable, followed by apoE3-NT and apoE4-NT, establishing an inverse correlation between helix bundle stability and DMPG vesicle transformation rate at pH 7. When the zwitterionic dimyristoylphosphatidylcholine (DMPC) was employed as the model lipid surface, interaction of apoE-NT isoforms with the lipid substrate was slow. However, upon lowering the pH from 7 to 3, a dramatic increase in the rate of DMPC vesicle transformation rate was observed for each isoform. To evaluate if the increased DMPC vesicle transformation rates observed at low pH is due to pH-dependent alterations in helix bundle stability, guanidine HCl denaturation studies were performed. ApoE2-NT and apoE3-NT displayed increased resistance to denaturation as a function of decreasing pH, while apoE4-NT showed no change in stability. Studies with the fluorescent probe, 8-anilino-1-naphthalene sulfonic acid, indicated an increase in apoE hydrophobic surface exposure upon decreasing the pH to 3.0. Taken together, the data indicate that changes in the stability of secondary structure elements in apoE-NT isoforms are not responsible for pH-induced increases in lipid binding activity. It is likely that pH-induced disruption of inter-helical tertiary contacts may promote helix bundle conformational changes that present the hydrophobic interior of the protein to potential lipid surface binding sites.

NMR and CD studies on the conformation of a synthetic peptide containing epitopes of the human immunodeficiency virus 1 transmembrane protein gp41.

CD and nmr characterizations are reported for the 23-mer peptide CMC3, corresponding to residues 577-599 of gp41, the transmembrane glycoprotein of the human immunodeficiency virus 1. Concentration, temperature, and pH dependencies of CD and nmr spectra are indicative of self-association with a consequent stabilization of secondary structural elements in water. The addition to the water solution of small amounts of trifluoroethanol induces a secondary structure, mostly due to the presence of helical elements. The amphipathic character of the helix and the presence of three hydrophobic 4/3 heptad repeats suggest that the peptide could be structured in a symmetric association of helices, such as in a coiled-coil structure. This behavior is discussed in terms of a possible role of this segment in the gp41 envelope oligomerization.

Structural basis for the binding of an anti-cytochrome c antibody to its antigen: crystal structures of FabE8-cytochrome c complex to 1.8 å resolution and FabE8 to 2.26 å resolution

A complete understanding of antibody-antigen association and specificity requires the stereochemical description of both antigen and antibody before and upon complex formation. The structural mechanism involved in the binding of the IgG 1 monoclonal antibody E8 to its highly charged protein antigen horse cytochrome c (cyt c) is revealed by crystallographic structures of the antigen-binding fragment (Fab) of E8 bound to cyt c (FabE8-cyt c), determined to 1.8 Å resolution, and of uncomplexed Fab E8 (FabE8), determined to 2.26 Å resolution. E8 antibody binds to three major discontiguous segments (33 to 39; 56 to 66; 96 to 104), and two minor sites on cyt c opposite to the exposed haem edge. Crystallographic definition of the E8 epitope complements and extends biochemical mapping and two-dimensional nuclear magnetic resonance with hydrogen-deuterium exchange studies. These combined results demonstrate that antibody-induced stabilization of secondary structural elements within the antigen can propagate locally to adjacent residues outside the epitope. Pre-existing shape complementarity at the FabE8-cyt c interface is enhanced by 48 bound water molecules, and by local movements of up to 4.2 Å for E8 antibody and 8.9 Å for cyt c. Glu62, Asn103 and the C-terminal Glu104 of cyt c adjust to fit the pre-formed V L “hill” and V H “valley” shape of the grooved E8 paratope. All six E8 complementarity determining regions (CDRs) contact the antigen, with CDR L1 forming 46% of the total atomic contacts, and CDRs L1 (29%) and H3 (20%) contributing the highest percentage of the total surface area of E8 buried by cyt c (550 Å 2). The E8 antibody covers 534 Å 2 of the cyt c surface. The formation of five ion pairs between E8 and flexible cyt c residues Lys60, Glu62 and Glu104 suggests the importance of mobile regions and electrostatic interactions in providing the exquisite specificity needed for recognition of this extremely conserved protein antigen. The highly homologous V L domains of E8 and anti-lysozyme antibody D1.3 achieve their distinct antigen-binding specificities by expanding the impact of their limited sequence differences through the recruitment of different sets of conserved residues and distinctly different CDR L3 conformations.

Stability of secondary structural elements in a solvent-free environment. II: The β-pleated sheets

The stability of single β-strands and multistrand β-pleated sheets as elements of secondary structure is examined in the absence of intermolecular interactions. Such experimental conditions (e.g., complete removal of solvent molecules and counterions) are achieved by placing the peptide ions in the gas phase. The metastable multiply- charged peptide ions produced by electrospray ionization undergo unimolecular dissociation. Intercharge repulsion within the precursor ions gives rise to the elevated kinetic energy of fragment ions, which is measured using Mass-analyzed Ion Kinetic Energy (MIKE) spectrometry. Intercharge distances calculated based on these measurements are compared to the numbers derived from molecular mechanics calculations with charge site assignments based on relative proton affinities. Evidence is presented suggesting that single β-strands form collapsed structures in the absence of solvents, while multistrand β-pleated sheets are likely to retain “native-like” secondary structures under the same conditions. These results indicate that intramolecular hydrogen bonds are the major factor determining the three-dimensional arrangements of polypeptides in the gas phase, compensating both long- and short-range electrostatic repulsions. This is in good agreement with our earlier findings (Proteins 27:165–170, 1997) concerning stability of helical conformation of melittin in the absence of solvent. Proteins Suppl. 2:22–27, 1998. © 1998 Wiley-Liss, Inc.

Stability of secondary structural elements in a solvent‐free environment. II: The β‐pleated sheets

Stability of secondary structural elements in a solvent‐free environment. II: The β‐pleated sheets

Stability of secondary structural elements in a solvent-free environment: the α helix

The stability of the alpha helix as an element of secondary structure is examined in the absence of solvation, in the gas phase. Mass-analyzed ion kinetic energy (MIKE) spectrometry was applied to measure intercharge repulsion and intercharge distance in multiply protonated melittin, a polypeptide known to possess a stable helical structure in a number of different environments. The experimental results, interpreted in combination with molecular mechanics calculations, suggest that triply charged melittin retains its secondary structure in the gas phase. The stability if the alpha-helical conformation of the polypeptide in the absence of solvent molecules reflects the fact that a network of intrinsic helical hydrogen bonds is energetically more favorable than unfolded conformations.

Stability of secondary structural elements in a solvent‐free environment: the α helix

The stability of the α helix as an element of secondary structure is examined in the absence of solvation, in the gas phase. Mass-analyzed ion kinetic energy (MIKE) spectrometry was applied to measure intercharge repulsion and intercharge distance in multiply protonated melittin, a polypeptide known to possess a stable helical structure in a number of different environments. The experimental results, interpreted in combination with molecular mechanics calculations, suggest that triply charged melittin retains its secondary structure in the gas phase. The stability if the α-helical conformation of the polypeptide in the absence of solvent molecules reflects the fact that a network of intrinsic helical hydrogen bonds is energetically more favorable than unfolded conformations. © 1997 Wiley-Liss, Inc.

1H and 15N Magnetic Resonance Assignments, Secondary Structure, and Tertiary Fold of Escherichia coli DnaJ(1-78)

We report the 1H and 15N chemical shift assignments along with an NMR-derived preliminary structure for DnaJ(1-78), a highly conserved N-terminal domain of DnaJ, the Escherichia coli Hsp40 homolog. This 9 kDa domain is believed to cooperate with DnaK, the E. coli Hsp70 homolog, in regulating a variety of cellular functions. Heteronuclear 3D NMR experiments were carried out on a uniformly 15N-labeled DnaJ(1-78), which is a stable, folded fragment. Standard 15N-edited NMR techniques afforded complete assignment of the backbone amide 1H and 15N pairs and partial assignment of the side-chain 1H and 15N atoms. The secondary structure of DnaJ(1-78) was determined from NOE connectivities obtained from 3D 15N-separated and 2D homonuclear NOESY spectra as well as 3JHNH alpha coupling constants obtained from a DQF-COSY spectrum and a 15N-edited HNHA experiment. The stability of secondary structural elements was assessed by monitoring amide exchange rates, and a model for the three-dimensional fold of these elements was derived from a set of long-range contacts extracted from homonuclear 2D NOESY experiments. The analysis indicates that DnaJ(1-78) is comprised of four alpha-helices and no beta-sheet with a short unstructured loop between antiparallel helices II and III. The shorter N-terminal and C-terminal helices make contacts with helices II and III at points well removed from the central loop. A discussion of how this preliminary structural model may explain mutation data from other laboratories is presented.

Strategies and rationales for the de novo design of a helical hairpin peptide

The de novo design of alpha t alpha, a helical hairpin peptide, is described, alpha t alpha (alpha-helix/turn/alpha-helix) was developed to provide a model system for protein folding at the level of secondary structure association and stabilization. According to the prevailing models of protein folding, the second step in the folding process is the association and stabilization of secondary structural elements or microdomains. A brief description of the design, along with CD and NMR evidence confirming the conformation of the peptide in solution, has been published (Fezoui Y, Weaver DL, Osterhout JJ, 1994, Proc Natl Acad Sci USA 91:3675-3679). The present work includes a full description of the design process, including the trade-offs that were made during the development of the peptide, a discussion of recent experimental results that were not available at the time of the original design, indications of areas where, in retrospect, the design might have been done differently, and a discussion of how the present work fits into the field of de novo protein design.

Production, Inhibitory Activity, Folding and Conformational Analysis of an N‐terminal and an Internal Deletion Variant of Chicken Cystatin

Two deletion variants of chicken cystatin were produced after cassette mutagenesis of the recombinant Arg-Glu-Phe-[Met1, Ile29, Leu89]-chicken egg white cystatin gene in Escherichia coli. The variant des-Ser1-Pro11-[Ala12, Glu13, Phe14, Met15, Ile29, Leu89]-chicken cystatin (N-del 2) and the variant Arg-Glu-Phe-[Met1, Ile29]-des-Cys71-Met89-chicken cystatin (del-helix II) were purified and characterized by inhibition kinetics, far-ultraviolet-CD and fluorescence spectroscopy, and their folding in guanidine hydrochloride (Gdn/HCl) was studied. The del-helix II variant, shortened by 19 amino acids, is a basic, stefin-like mini-cystatin with one disulfide bridge. Its inhibitory properties are identical to chicken cystatin and its stability against Gdn/HCl is similar. The folding of the del-helix II variant corresponds best to a single step process. In contrast to this, the reversible folding of natural and recombinant chicken cystatin is more complex when recorded by either tryptophan fluorescence or far-ultraviolet-CD. With increasing Gdn/HCl concentration, a stabilization of secondary-structural elements is initially observed, followed by unfolding with minor but distinct intermediate states. The N-del 2 variant has a neutral pI and shows folding behaviour very similar to natural and recombinant chicken cystatin. However its inhibition constants with papain, actinidin and cathepsin B and L are 1000-100,000-fold higher than those obtained with natural and recombinant chicken cystatin.