Stable Polyplexes Research Articles

PH modification of gel mobility shift improves polyplex selection In Vivo

Cationic polymers that bind with the plasmids to form polyplexes protect the DNA from enzymatic degradation and improve cellular and tissue uptake. Complete or near complete gel retardation of the polyplex is an important assay to determine the optimal polymer: plasmid ratio for in vitro and in vivo studies. Nevertheless, despite minimal to moderate gel retardation of histidine-lysine (HK) polyplexes formed with low peptide: plasmid DNA ratios (1:2 and 1:4; w:w), the polyplexes effectively targeted the tumor in vivo. To understand the lack of predictability of the initial gel mobility shift assays, we revisited the retardation and stability of polyplexes with these electrophoresis assays. Because the histidine component with a pKa of about 6.0 will have a greater positive charge and may bind plasmids with a higher affinity at lower pHs, we compared the retardation of the two HK polyplexes when the pH of the running buffer of the gel mobility shift assay was altered. Both HK polyplexes were retarded significantly more when the running buffer had a pH of 7.3 instead of the standard pH of 8.3. Indeed, the HK polyplexes formed at the 1:2 ratio showed complete retardation at pH 7.3. Consequently, while both HK polyplexes formed at these low ratios targeted the tumor, the polyplex formed with the 1:2 ratio had reduced tumor gene expression variability and lower lung and liver values. Thus, the selection of the optimal ratios for the linear HK and plasmid for transfection studies in vivo was improved with a running buffer pH of 7.3.

Branching in poly(amine-co-ester) polyplexes impacts mRNA transfection

Branching is a key structural parameter of polymers, which can have profound impacts on physicochemical properties. It has been demonstrated that branching is a modulating factor for mRNA delivery and transfection using delivery vehicles built from cationic polymers, but the influence of polymer branching on mRNA delivery remains relatively underexplored compared to other polymer features such as monomer composition, hydrophobicity, pKa, or the type of terminal group. In this study, we examined the impact of branching on the physicochemical properties of poly(amine-co-esters) (PACE) and their efficiency in mRNA transfection in vivo and in vitro under various conditions. PACE polymers were synthesized with various degrees of branching ranging from 0 to 0.66, and their transfection efficiency was systemically evaluated. We observed that branching improves the stability of polyplexes but reduces the pH buffering capacity. Therefore, the degree of branching (DB) must be optimized in a delivery route specific manner due to differences in challenges faced by polyplexes in different physiological compartments. Through a systematic analysis of physicochemical properties and mRNA transfection in vivo and in vitro, this study highlights the influence of polymer branching on nucleic acid delivery.

Thermally Robust Solvent-Free Liquid Polyplexes for Heat-Shock Protection and Long-Term Room Temperature Storage of Therapeutic Nucleic Acids.

Nucleic acid therapeutics have attracted recent attention as promising preventative solutions for a broad range of diseases. Nonviral delivery vectors, such as cationic polymers, improve the cellular uptake of nucleic acids without suffering the drawbacks of viral delivery vectors. However, these delivery systems are faced with a major challenge for worldwide deployment, as their poor thermal stability elicits the need for cold chain transportation. Here, we demonstrate a biomaterial strategy to drastically improve the thermal stability of DNA polyplexes. Importantly, we demonstrate long-term room temperature storage with a transfection efficiency maintained for at least 9 months. Additionally, extreme heat shock studies show retained luciferase expression after heat treatment at 70 °C. We therefore provide a proof of concept for a platform biotechnology that could provide long-term room temperature storage for temperature-sensitive nucleic acid therapeutics, eliminating the need for the cold chain, which in turn would reduce the cost of distributing life-saving therapeutics worldwide.

Tuning the Potency of Farnesol-Modified Polyethylenimine with Polyanionic Trans-Booster to Enhance DNA Delivery.

Low molecular weight polyethylenimine (PEI) based lipopolymers become an attractive strategy to construct nonviral therapeutic carriers with promising transfection efficiency and minimal toxicity. Herein, this paper presents the design and synthesis of novel farnesol (Far) conjugated PEI, namely PEI1.2k-SA-Far7. The polymers had quick DNA complexation, effective DNA unpacking (dissociation), and cellular uptake abilities when complexed with plasmid DNA. However, they were unable to provide robust transfection in culture, indicating inability of Far grafting to improve the transfection efficacy significantly. To overcome this limitation, the commercially available polyanionic Trans-Booster additive, which is capable of displaying electrostatic interaction with PEI1.2k-SA-Far7, has been used to enhance the uptake of pDNA polyplexes and transgene expression. pDNA condensation was successfully achieved in the presence of the Trans-Booster with more stable polyplexes, and in vitro transfection efficacy of the polyplexes was improved to be comparable to that obtained with an established reference reagent. The PEI1.2k-SA-Far7/pDNA/Trans-Booster ternary complex exhibited good compatibility with cells and minimal hemolysis activity. This work demonstrates the exemplary potency of using additives in polyplexes and the potential of resultant ternary complexes for effective pDNA delivery.

Hydrophobicity Tuning of Cationic Polyaspartamide Derivatives for Enhanced Antisense Oligonucleotide Delivery.

Various cationic polymers are used to deliver polyplex-mediated antisense oligonucleotides (ASOs). However, few studies have investigated the structural determinants of polyplex functionalities in polymers. This study focused on the polymer hydrophobicity. A series of amphiphilic polyaspartamide derivatives possessing various hydrophobic (R) moieties together with cationic diethylenetriamine (DET) moieties in the side chain (PAsp(DET/R)s) were synthesized to optimize the R moieties (or hydrophobicity) for locked nucleic acid (LNA) gapmer ASO delivery. The gene knockdown efficiencies of PAsp(DET/R) polyplexes were plotted against a hydrophobicity parameter, logD7.3, of PAsp(DET/R), revealing that the gene knockdown efficiency was substantially improved by PAsp(DET/R) with logD7.3 higher than -2.4. This was explained by the increased polyplex stability and improved cellular uptake of ASO payloads. After intratracheal administration, the polyplex samples with a higher logD7.3 than -2.4 induced a significantly higher gene knockdown in the lung tissue compared with counterparts with lower hydrophobicity and naked ASO. These results demonstrate that the hydrophobicity of PAsp(DET/R) is crucial for efficient ASO delivery in vitro and in vivo.

Advancing nucleic acid delivery through cationic polymer design: non-cationic building blocks from the toolbox

The rational integration of non-cationic building blocks into cationic polymers can be devised to enhance the performance of the resulting gene delivery vectors, improving cell targeting behavior, uptake, endosomal escape, toxicity, and transfection efficiency.

Solvent-Free Synthesis of Multifunctional Block Copolymer and Formation of DNA and Drug Nanocarriers.

The synthesis of well-defined multifunctional polymers is of great importance for the development of complex materials for biomedical applications. In the current work, novel and multi-amino-functional diblock copolymer for potential gene and drug delivery applications was successfully synthesized. A highly efficient one-step and quantitative modification of an alkyne-functional polycarbonate-based precursor was performed, yielding double hydrophilic block copolymer with densely grafted primary amine side groups. The obtained positively charged block copolymer co-associated with DNA, forming stable and biocompatible nanosized polyplexes. Furthermore, polyion complex (PIC) micelles with tunable surface charge and decorated with cell targeting moieties were obtained as a result of direct mixing in aqueous media of the multi-amino-functional block copolymer and a previously synthesized oppositely charged block copolymer bearing disaccharide end-group. The obtained well-defined nanosized PIC-micelles were loaded with the hydrophobic drug curcumin. Both types of nanoaggregates (polyplexes and PIC-micelles) were physico-chemically characterized. Moreover, initial in vitro evaluations were performed to assess the nanocarriers' potential for biomedical applications.

Nucleic acid delivery to retinal cells using lipopeptides as a potential tool towards ocular gene therapies

We evaluated the use of lipopeptides capable to bind to nucleic acids towards plasmid DNA (pDNA) delivery. The investigations were particularly focused on arising retinal pigment epithelial cells (ARPE-19) as motivated by the considerable number of ocular disorders linked to gene aberrations. The lipopeptides comprised the artificial oligoamino acid succinyl-tetraethylene pentamine (Stp) as well as incorporated lysines, histidines, cysteines, fatty acids, and tyrosine trimers. Regardless of the structural differences, the lipopeptides demonstrated to efficiently condense pDNA at nitrogen-to-phosphate molar ratio (N/P) ≥ 6. Spheric nanoparticles were observed by cryo-TEM and dynamic light scattering determined hydrodynamic sizes ranging from 50 to 130 nm. The biological assays evidenced highly efficient pDNA delivery with a lower degree of cytotoxicity compared to the well-known transfecting agent linear polyethylenimine (LPEI). Although more efficient than LPEI, cysteine-containing carriers were demonstrated to be less efficient than the other counterparts possibly due to exceeding polyplex stabilization via disulfide cross links, which could hamper pDNA unpacking at the target site. Therefore, clearly a balance between complex stability and cargo release should be taken into account to optimize the transfection efficiency of the non-viral vectors. The gene transfer activity in ARPE-19 cells suggests the applicability of this kind of carrier for ocular treatments based on retinal gene delivery.

Deciphering Structural Determinants Distinguishing Active from Inactive Cell-Penetrating Peptides for Cytosolic mRNA Delivery.

The formation of noncovalent complexes by mixing of positively charged polymers with negatively charged oligonucleotides (ONs) is a widely explored concept in nanomedicine to achieve cellular delivery of ONs. Uptake of ON complexes occurs through endocytosis, which then requires release of ON from endosomes. As one type of polymer, cell-penetrating peptides (CPPs) are being used which are peptides of about 8-30 amino acids in length. However, only a few CPPs yield effective cytosolic ON delivery and activity. Several strategies have been devised to increase cellular uptake and enhance endosomal release, among which an increase of osmotic pressure through the so-called proton sponge effect, disruption of membrane integrity through membrane activity, and disulfide-mediated polymerization. Here, we address the relevance of these concepts for mRNA delivery by incorporating structural features into the human lactoferrin-derived CPP, which shows uptake but not delivery. The incorporation of histidines was explored to address osmotic pressure and structural motifs of the delivery-active CPP PepFect14 (PF14) to address membrane disturbance, and finally, the impact of polymerization was explored. Whereas oligomerization increased the stability of polyplexes against heparin-induced decomplexation, neither this approach nor the incorporation of histidine residues to promote a proton-sponge effect yielded activity. Also, the replacement of arginine residues with lysine or ornithine residues, as in PF14, was without effect, even though all polyplexes showed cellular uptake. Ultimately, sufficient activity could only be achieved by transferring amphipathic sequence motifs from PF14 into the hLF context with some benefit of oligomerization demonstrating overarching principles of delivery for CPPs, lipid nanoparticles, and other types of delivery polymers.

Modification of Branched Poly(ethylene imine) with d-Fructose for Selective Delivery of siRNA into Human Breast Cancer Cells.

Branched poly(ethylene imine) (bPEI) is frequently used in RNA interference (RNAi) experiments as a cationic polymer for the delivery of small interfering RNA (siRNA) because of its ability to form stable polyplexes that facilitate siRNA uptake. However, the use of bPEI in gene delivery is limited by its cytotoxicity and a need for target specificity. In this work, bPEI is modified with d-fructose to improve biocompatibility and target breast cancer cells through the overexpressed GLUT5 transporter. Fructose-substituted bPEI (Fru-bPEI) is accessible in three steps starting from commercially available protected fructopyranosides and bPEI. Several polymers with varying molecular weights, degrees of substitution, and linker positions on d-fructose (C1 and C3) are synthesized and characterized with NMR spectroscopy, size exclusion chromatography, and elemental analysis. In vitro biological screenings show significantly reduced cytotoxicity of 10kDa bPEI after fructose functionalization, specific uptake of siRNA polyplexes, and targeted knockdown of green fluorescent protein (GFP) in triple-negative breast cancer cells (MDA-MB-231) compared to noncancer cells (HEK293T).

Overcoming the blood-brain barrier? - prediction of blood-brain permeability of hydrophobically modified polyethylenimine polyplexes for siRNA delivery into the brain with in vitro and in vivo models

The blood-brain barrier (BBB) is a highly selective biological barrier that represents a major bottleneck in the treatment of all types of central nervous system (CNS) disorders. Small interfering RNA (siRNA) offers in principle a promising therapeutic approach, e.g., for brain tumors, by downregulating brain tumor-related genes and inhibiting tumor growth via RNA interference. In an effort to develop efficient siRNA nanocarriers for crossing the BBB, we utilized polyethyleneimine (PEI) polymers hydrophobically modified with either stearic-acid (SA) or dodecylacrylamide (DAA) subunits and evaluated their suitability for delivering siRNA across the BBB in in vitro and in vivo BBB models depending on their structure. Physicochemical characteristics of siRNA-polymer complexes (polyplexes (PXs)), e.g., particle size and surface charge, were measured by dynamic light scattering and laser Doppler anemometry, whereas siRNA condensation ability of polymers and polyplex stability was evaluated by spectrophotometric methods. The composition of the biomolecule corona that absorbs on polyplexes upon encountering physiological fluids was investigated by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and by a liquid chromatography-tandem mass spectrometry (LC-MS-MS) method. Cellular internalization abilities of PXs into brain endothelial cells (hCMEC/D3) was confirmed, and a BBB permeation assay using a human induced pluripotent stem cell (hiPSC)–derived BBB model revealed similar abilities to cross the BBB for all formulations under physiological conditions. However, biodistribution studies of radiolabeled PXs in mice were inconsistent with in vitro results as the detected amount of radiolabeled siRNA in the brain delivered with PEI PXs was higher compared to PEI-SA PXs. Taken together, PEI PXs were shown to be a suitable nanocarrier to deliver small amounts of siRNA across the BBB into the brain but more sophisticated human BBB models that better represent physiological conditions and biodistribution are required to provide highly predictive in vitro data for human CNS drug development in the future.

Novel Multi-Responsive Hyperbranched Polyelectrolyte Polyplexes as Potential Gene Delivery Vectors.

In this work, we investigate the complexation behavior of poly(oligo(ethylene glycol)methyl methacrylate)-co-poly(2-(diisopropylamino)ethyl methacrylate), P(OEGMA-co-DIPAEMA), hyperbranched polyelectrolyte copolymers, synthesized by reversible addition fragmentation chain transfer (RAFT) polymerization, with short-linear DNA molecules. The synthesized hyperbranched copolymers (HBC), having a different chemical composition, are prepared in order to study their ability to bind with a linear nucleic acid at various N/P ratios (amine over phosphate groups). Specifically, the three pH and thermo-responsive P(OEGMA-co-DIPAEMA) hyperbranched copolymers were able to form polyplexes with DNA, with dimensions in the nanoscale. Using several physicochemical methods, such as dynamic and electrophoretic light scattering (DLS, ELS), as well as fluorescence spectroscopy (FS), the complexation process and the properties of formed polyplexes were explored in response to physical and chemical stimuli such as temperature, pH, and ionic strength. The mass and the size of polyplexes are shown to be affected by the hydrophobicity of the copolymer utilized each time, as well as the N/P ratio. Additionally, the stability of polyplexes in the presence of serum proteins is found to be excellent. Finally, the multi-responsive hyperbranched copolymers were evaluated regarding their cytotoxicity via in vitro experiments on HEK 293 non-cancerous cell lines and found to be sufficiently non-toxic. Based on our results, these polyplexes could be useful candidates for gene delivery and related biomedical applications.

A new nano hyperbranched β-pinene polymer: Controlled synthesis and nonviral gene delivery

Recently, an extensive research effort has been directed toward the improvement of nonviral transfection vectors, such as polymeric materials. The macromolecular structure of polymers has a substantial effect on their transfection efficacy. In this context, the modern advances in polymer production techniques, such as the deactivation-enhanced radical atom transfer polymerization (DE-ATRP), have been fundamental for the synthesis of controlled architecture nanomaterials. In this study, hyperbranched poly(β-pinene)-PDMAEMA-PEGDMA nanometric copolymers were synthesised at high conversion via DE-ATRP using different concentrations of β-pinene for gene delivery applications. The structural characterization and the biological performance of the materials were investigated. The copolymers’ molar mass (10,434–16,438 mol l-1), dispersity, and conversion (90–95%) varied significantly with β-pinene proportion on the polymerizations. The polymer-gene complexes generated (280–110 nm) presented excellent solution stability due to the β-pinene segment on the copolymers. Gene delivery and transfection were highly dependent on the copolymer composition. The copolymers containing the highest β-pinene proportions exhibited the best results with high transfection effectivity. In conclusion, the incorporation of β-pinene in DMAEMA-PEGMA copolymer formulations is a renewable option to improve the materials’ branching ratio, polyplex stability, and gene delivery performance without causing cytotoxic effects.

Linear Poly(ethylenimine-propylenimine) Random Copolymers for Gene Delivery: From Polymer Synthesis to Efficient Transfection with High Serum Tolerance.

Naturally occurring oligoamines, such as spermine, spermidine, and putrescine, are well-known regulators of gene expression. These oligoamines frequently have short alkyl spacers with varying lengths between the amines. Linear polyethylenimine (PEI) is a polyamine that has been widely applied as a gene vector, with various formulations currently in clinical trials. In order to emulate natural oligoamine gene regulators, linear random copolymers containing both PEI and polypropylenimine (PPI) repeat units were designed as novel gene delivery agents. In general, statistical copolymerization of 2-oxazolines and 2-oxazines leads to the formation of gradient copolymers. In this study, however, we describe for the first time the synthesis of near-ideal random 2-oxazoline/2-oxazine copolymers through careful tuning of the monomer structures and reactivity as well as polymerization conditions. These copolymers were then transformed into near-random PEI-PPI copolymers by controlled side-chain hydrolysis. The prepared PEI-PPI copolymers formed stable polyplexes with GFP-encoding plasmid DNA, as validated by dynamic light scattering. Furthermore, the cytotoxicity and transfection efficiency of polyplexes were evaluated in C2C12 mouse myoblasts. While the polymer chain length did not significantly increase the toxicity, a higher PPI content was associated with increased toxicity and also lowered the amount of polymers needed to achieve efficient transfection. The transfection efficiency was significantly influenced by the degree of polymerization of PEI-PPI, whereby longer polymers resulted in more transfected cells. Copolymers with 60% or lower PPI content exhibited a good balance between high plasmid-DNA transfection efficiency and low toxicity. Interestingly, these novel PEI-PPI copolymers revealed exceptional serum tolerance, whereby transfection efficiencies of up to 53% of transfected cells were achieved even under 50% serum conditions. These copolymers, especially PEI-PPI with DP500 and a 1:1 PEI/PPI ratio, were identified as promising transfection agents for plasmid DNA.

A cyclen-based fluoropolymer as a versatile vector for gene and protein delivery

Gene and protein therapy have shown great potential in the treatment of severe human diseases. It’s increasingly necessary for the development of multifunctional vectors that can stabilize the gene / protein and deliver them into cells. Herein, a novel polymer composed of fluorinated linkage and Zn-coordinated macrocyclic polyamine (cyclen) was designed and synthesized via ring-opening polymerization. The Zn-cyclen moiety contributes to the gene transfection efficiency, while the fluorinated backbone might afford the protein delivery ability. Experimental results demonstrated that Zn-coordination could improve the water solubility of the polymer and the stability of the polyplexes formed with DNA. For gene transfection, the target polymer ZnCF4 could give similar to or slightly higher efficiency than the golden standard PEI 25 kDa in various cell lines. Several assays revealed that the improvement of transfection efficiency by the Zn-coordination might come from higher polyplex stability, better cellular uptake, and efficient endosome escape. For protein delivery, the Zn-coordination could also largely enhance the efficiency. β-Galactosidase assay revealed that ZnCF4 could not only effectively transfer protein into cells, but also maintain the protein activity. These results suggest that the title polymer might be a versatile platform for the delivery of various bioactive macromolecules, showing its potential in gene and protein therapy.

Hydrophobic Optimization of Functional Poly(TPAE-co-suberoyl chloride) for Extrahepatic mRNA Delivery following Intravenous Administration.

Messenger RNA (mRNA) has generated great attention due to its broad potential therapeutic applications, including vaccines, protein replacement therapy, and immunotherapy. Compared to other nucleic acids (e.g., siRNA and pDNA), there are more opportunities to improve the delivery efficacy of mRNA through systematic optimization. In this report, we studied a high-throughput library of 1200 functional polyesters for systemic mRNA delivery. We focused on the chemical investigation of hydrophobic optimization as a method to adjust mRNA polyplex stability, diameter, pKa, and efficacy. Focusing on a region of the library heatmap (PE4K-A17), we further explored the delivery of luciferase mRNA to IGROV1 ovarian cancer cells in vitro and to C57BL/6 mice in vivo following intravenous administration. PE4K-A17-0.2C8 was identified as an efficacious carrier for delivering mRNA to mouse lungs. The delivery selectivity between organs (lungs versus spleen) was found to be tunable through chemical modification of polyesters (both alkyl chain length and molar ratio in the formulation). Cre recombinase mRNA was delivered to the Lox-stop-lox tdTomato mouse model to study potential application in gene editing. Overall, we identified a series of polymer-mRNA polyplexes stabilized with Pluronic F-127 for safe and effective delivery to mouse lungs and spleens. Structure–activity relationships between alkyl side chains and in vivo delivery were elucidated, which may be informative for the continued development of polymer-based mRNA delivery.

Transferrin Receptor Targeted Polyplexes Completely Comprised of Sequence-Defined Components.

Human transferrin protein (Tf) modified polyplexes have already displayed encouraging potential for receptor-mediated nucleic acid delivery into tumors. The use of a blood-derived targeting protein and polydisperse macromolecular cationic subunits however presents a practical challenge for pharmaceutical grade production. Here, Tf receptor (TfR) targeted small interfering RNA (siRNA) polyplexes are designed that are completely composed of synthetic, monodisperse, and sequence-defined subunits generated by solid-phase supported synthesis. An optimized cationizable lipo-oligoaminoamide (lipo-OAA) is used for siRNA core polyplex formation, and a retro-enantio peptide (reTfR) attached via a monodisperse polyethylene glycol (PEG) spacer via click chemistry is applied for targeting. Improved gene silencing is demonstrated in TfR-expressing KB and DU145 cells. Analogous plasmid DNA (pDNA) polyplexes are successfully used for receptor-mediated gene delivery in TfR-rich K562 cells and Neuro2a cells. Six lipo-OAAs differing in their lipidic domain and redox-sensitive attachment of lipid residues are tested in order to evaluate the impact of core polyplex stability on receptor-dependent gene transfer.

ATP-Responsive Multifunctional Supramolecular Polymer as a Nonviral Vector for Boosting Cholesterol Removal from Lipid-Laden Macrophages.

Specific delivery of NCEH1 plasmid is a promising approach to boost the cholesterol removal from lipid-laden macrophages for antiatherosclerosis. Polyethylenimine (PEI) is one of the most efficient gene carriers among nonviral vectors. However, the high transfection activity of PEI is always accompanied by profound cytotoxicity. To tackle the paradox between transfection efficiency and safety, we constructed a novel ATP-responsive multifunctional supramolecular polymer by cross-linking functionalized low-molecular-weight PEI via a boronic ester bond for NCEH1 plasmid delivery. The supramolecular polymer could condense NCEH1 plasmids to form stable nanosized polyplexes when the w/w ratios of the polymer and gene were higher than 2. ATP-triggered degradation of the polymer and pDNA release were characterized by a series of studies, including 1H NMR, 31P NMR, XPS, agarose gel electrophoresis, and ethidium bromide exclusion tests. In addition, the changes in particle size and morphology were observed in the presence of ATP. Interestingly, the supramolecular polymer showed broad spectrum antioxidant activities by measuring the elimination rates of different reactive oxygen species. In addition, the supramolecular polymer displayed a high buffering capability and good cytocompatibility as demonstrated by the results of the buffering capacity, a hemolysis assay, and a cytotoxicity test. Importantly, it was revealed that the supramolecular polymer/NCEH1 plasmid polyplex formulated at a w/w ratio of 20 was most effective in enhancing cholesterol removal from lipid-laden macrophages and reducing the accumulation of lipid droplets as evidenced by transfection study, cholesterol efflux assay, and oil red O staining studies. Collectively, the ATP-responsive multifunctional supramolecular polymer holds great potential for safe and efficient gene delivery for antiatherosclerosis.

Dynamic mRNA polyplexes benefit from bioreducible cleavage sites for in vitro and in vivo transfer

Currently, messenger RNA (mRNA)-based lipid nanoparticle formulations revolutionize the clinical field. Cationic polymer-based complexes (polyplexes) represent an alternative compound class for mRNA delivery. After establishing branched polyethylenimine with a succinylation degree of 10% (succPEI) as highly effective positive mRNA transfection standard, a diverse library of PEI-like peptides termed sequence-defined oligoaminoamides (OAAs) was screened for mRNA delivery. Notably, sequences, which had previously been identified as potent plasmid DNA (pDNA) or small-interfering RNA (siRNA) carriers, displayed only moderate mRNA transfection activity. A second round of screening combined the cationizable building block succinoyl tetraethylene pentamine and histidines for endosomal buffering, tyrosine tripeptides and various fatty acids for mRNA polyplex stabilization, as well as redox-sensitive units for programmed intracellular release. For the tested OAA carriers, balancing of extracellular stability, endosomal lytic activity, and intracellular release capability was found to be of utmost importance for optimum mRNA transfection efficiency. OAAs with T-shape topology containing two oleic acids as well-stabilizing fatty acids, attached via a dynamic bioreducible building block, displayed superior activity with up to 1000-fold increased transfection efficiency compared to their non-reducible analogs. In the absence of the dynamic linkage, incorporation of shorter less stabilizing fatty acids could only partly compensate for mRNA delivery. Highest GFP expression and the largest fraction of transfected cells (96%) could be detected for the bioreducible OAA with incorporated histidines and a dioleoyl motif, outperforming all other tested carriers as well as the positive control succPEI. The good in vitro performance of the dynamic lead structure was verified in vivo upon intratracheal administration of mRNA complexes in mice.

Functional Polyglycidol-Based Block Copolymers for DNA Complexation.

Gene therapy is an attractive therapeutic method for the treatment of genetic disorders for which the efficient delivery of nucleic acids into a target cell is critical. The present study is aimed at evaluating the potential of copolymers based on linear polyglycidol to act as carriers of nucleic acids. Functional copolymers with linear polyglycidol as a non-ionic hydrophilic block and a second block bearing amine hydrochloride pendant groups were prepared using previously synthesized poly(allyl glycidyl ether)-b-polyglycidol block copolymers as precursors. The amine functionalities were introduced via highly efficient radical addition of 2-aminoethanethiol hydrochloride to the alkene side groups. The modified copolymers formed loose aggregates with strongly positive surface charge in aqueous media, stabilized by the presence of dodecyl residues at the end of the copolymer structures and the hydrogen-bonding interactions in polyglycidol segments. The copolymer aggregates were able to condense DNA into stable and compact nanosized polyplex particles through electrostatic interactions. The copolymers and the corresponding polyplexes showed low to moderate cytotoxicity on a panel of human cancer cell lines. The cell internalization evaluation demonstrated the capability of the polyplexes to successfully deliver DNA into the cancer cells.