Stability-indicating Liquid Chromatographic Method Research Articles

Physicochemical and microbiological stability of 40mg/mL amiodarone hydrochloride oral suspension.

In an effort to expedite the publication of articles, AJHP is posting manuscripts online as soon as possible after acceptance. Accepted manuscripts have been peer-reviewed and copyedited, but are posted online before technical formatting and author proofing. These manuscripts are not the final version of record and will be replaced with the final article (formatted per AJHP style and proofed by the authors) at a later time. Amiodarone hydrochloride is an antiarrhythmic drug used to treat supraventricular tachycardia. However, there are currently no commercial pediatric forms available to treat young patients. Various oral formulations were previously reported in the literature, but the concentration was lower than the doses prescribed in clinical practice (a loading dose of 500mg/m2/day for 7-10 days followed by a maintenance dose of 250mg/m2/day). The objective of this study was to develop an oral liquid formulation of amiodarone hydrochloride at an optimal concentration for use in children and to evaluate its physicochemical and microbiological stability. No commercial suspension vehicle was used, allowing the choice of excipients. Compounding was performed using hydroxypropylmethylcellulose as thickener, potassium sorbate preservative, citric acid/sodium citrate buffer, sodium saccharin as a , and a strawberry flavoring agent. A concentration of 40mg/mL was selected based on a 5-year compilation of prescribed doses. Analyses performed were the following: visual and microscopic inspection, testing for antimicrobial preservation, osmolality and pH measurements, quantification of amiodarone hydrochloride by a stability-indicating liquid chromatography method, and a microbiological count. At least 95% of the initial amiodarone hydrochloride remained stable during the 60-day study period under refrigeration. All other tested parameters remained stable at 5 °C. A targeted log reduction of the microorganism inoculum by day 14 and no microbial growth by day 28 were demonstrated in the test for antimicrobial preservation. The stability of 40mg/mL amiodarone hydrochloride oral suspension was maintained under refrigeration for 60 days before opening bottles and for 1 month after opening bottles.

Stability-indicating liquid chromatographic method development and validation for quantification of trifarotene in pure and topical drug product

BackgroundTrifarotene is effective for treating acne and other skin issues. To ensure its quality and meet regulatory standards, a reverse phase liquid chromatography (RP-LC) stability-indicating method was developed and validated for its quantification in pure and topical dosage forms. An isocratic elution chromatographic method was employed, using an octadecylsilyl silica gel-packed column (150 mm × 4.6 mm, 3 µm particle size). The mobile phase was a mixture of phosphate buffer and acetonitrile (40:60 v/v). Chromatographic conditions included a flow rate of 0.5 mL/min, column temperature of 40 °C, detection at 265 nm, and injection volume of 20 µL.ResultsThe developed analytical method reports the retention time of trifarotene 11.2 min, higher theoretical plate count, asymmetric peak, and good resolution between the peaks of trifarotene, phenoxyethanol, and environmentally generated impurities.ConclusionThe analytical method has been found to be linear, accurate, robust, specific, and selective for impurities produced during forced degradation studies. The proposed analytical method can be utilized for routine pharmaceutical analysis of trifarotene to judge its quality and safety.

Stability-Indicating Liquid Chromatography Method for Rifaximin and LC-MS Characterization of its Potential Degradants

Rifaximin (RFX) is a structural analog of rifampin that has been shown to be a gastrointestinal-selective antibiotic with broad-spectrum antibacterial properties, a pronounced safety profile, and limited drug interactions. Crohn’s disease, diarrhea, hepatic encephalopathy, irritable bowel syndrome, and traveler’s diarrhea caused by non-invasive diarrheagenic Escherichia coli, can all be treated with rifaximin. FDA has designated RFX as an orphan drug for the treatment of hepatic encephalopathy. There is a substantial need for analytical quality monitoring of Rifaximin to ensure the safety and efficacy of treatment. To generate degradants, forced degradation study of the drug was carried out in acid, alkali, oxidative, thermal, and photolytic stress conditions. The optimum separation of the drug, and its degradants was achieved on an Inertsil ODS-3V C18 column (250 X 4.6 mm X 5 μm) under gradient elution conditions using, 10 mM potassium dihydrogen orthophosphate (pH 5.0 ± 0.05) as mobile phase A, and acetonitrile as mobile phase B, at a flow rate of 1.0 mL/min. The run time was 41 minutes and the detection wavelength was 258 nm. The method was validated in accordance with the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human use Guidelines. The drug was stable in neutral hydrolysis, photo and dry heat degradation conditions. The percentage degradation observed during acid, alkali hydrolysis and oxidative stress conditions were 70.46, 15.11 and 24.18, respectively. The degradants were investigated by LC-MS which indicated the presence of four (m/z 784.2, 744.5, 784.3, 753.8), three (m/z 744.5, 784.3, 753.8) and five (m/z 772.4, 838.4, 744.5, 753.8, and 801.9) degradants in acid, alkali and oxidative stress conditions, respectively. The structures of degradants were elucidated using Liquid chromatography–mass spectrometry (LC-MS) and Liquid chromatography tandem mass spectrometry (LC-MS/MS) analyses.

Simultaneous estimation of neratinib and naringenin from pharmaceuticals using a stability-indicating liquid chromatographic method: Application to analytical quality by design concept and multi-tool method greenness assessment

A validated stability-indicating simultaneous liquid chromatographic method was developed to estimate neratinib (NRB) and naringenin (NRN). We used the principles of analytical quality by design (AQbD) to develop a robust analytical method. The ACN%, pH, and flow rate were the three method variables investigated and optimized using the Box-Behnken experimental design (BBD). The optimized chromatographic condition used a mobile phase of ACN: phosphate buffer pH 3.8 (70:30 v/v) flowing at 0.6 mL.min−1 on a 250 mm C-18 column. Diode array detection was performed at 277 nm. The method was robust, linear (r2 = 0.999), accurate and precise. The detection and quantitation limits were 0.275 and 1.0 µg.mL−1 for both drugs. Forced degradation revealed non-interference of degradation peaks with the analyte peaks and ensured method specificity. The LC estimation demonstrated higher solubility of NRB and NRN in Precirol ATO5 and Tween 80 as solid lipid and surfactant, respectively. In addition, the entrapment efficiencies were 78 % and 86 % for SLNs of NRB and NRN, respectively. After 24 h, the In-vitro release study indicated that 40 % of the drugs were released from the pure drug suspension and >95 % released from the SLN. Afterwards, the results from five different greenness assessment approach established the present method's green nature. Overall, a green, federally robust, and flexible liquid chromatographic method was developed and can be applied routinely to estimate NRB and NRN from the developed nano formulation.

Development and Stability of a New Formulation of Pentobarbital Suppositories for Paediatric Procedural Sedation.

Pentobarbital is a drug of choice to limit motion in children during paediatric procedural sedations (PPSs). However, despite the rectal route being preferred for infants and children, no pentobarbital suppositories are marketed, and therefore they must be prepared by compounding pharmacies. In this study, two suppository formulations of 30, 40, 50, and 60 mg of pentobarbital sodium were developed using hard-fat Witepsol® W25 either alone (formulation F1) or with oleic acid (formulation F2). The two formulations were subjected to the following tests described in the European Pharmacopoeia: uniformity of dosage units, softening time, resistance to rupture, and disintegration time. The stability of both formulations was also investigated for 41 weeks of storage at 5 ± 3 °C using a stability-indicating liquid chromatography method to quantify pentobarbital sodium and research breakdown product (BP). Although both formulae were compliant to uniformity of dosage, the results were in favour of a faster disintegration of F2 compared to F1 (-63%). On the other hand, F1 was found to be stable after 41 weeks of storage unlike F2 for which several new peaks were detected during the chromatographic analysis, suggesting a shorter stability of only 28 weeks. Both formulae still need to be clinically investigated to confirm their safety and efficiency for PPS.

Empagliflozin: Validation of Stability-Indicating LC Method and in silico Toxicity Studies.

A new stability-indicating liquid chromatography method was developed for the quantification of empagliflozin and two synthetic impurities. The chromatographic conditions included Spherisorb® RP-18 column (150 × 4.6mm, 5μm) with a PDA detector, using acetonitrile and formic acid (pH4.0) as mobile phase in gradient elution and flow-rate of 1.2mL·min-1. The gradient increasing from 51 to 100% acetonitrile until 11.00min, followed by decreasing the solvent from 100% to the initial ratio from 11.01 to 15.00min. The method was validated according to International Council of Harmonization guidelines. The LOD and LOQ values for impurities A and B were 35 and 15ng·mL-1, respectively, (for LOD) and 115 and 35ng.mL-1, respectively (for LOQ). The method was linear in the range of 80-140, 115-1150 and 35-350ng·mL-1 for EMPA, impurities A and B, respectively, and the correlation coefficient were > 0.999 in all situations, indicating the method good linearity. The developed method showed a good recovery for empagliflozin and added impurities. The method has proven to be precise, demonstrated values less than 2.0% to empagliflozin and 5.0% to synthetic impurities, robust and selective with no interference from other products in the determination of analytes. The in silico toxicity prediction suggested that the impurities do not present any toxicity risk for the parameters evaluated.

Development of a Stability-indicating RP-UPLC Method for determination of Fidarestat in Bulk Drug

An accurate, precise, robust and selective stability-indicating liquid chromatographic (UPLC) method has been developed for the monitoring of Fidarestat in the presence of its forced degradants. The drug was subjected to hydrolysis (acid and alkali), oxidation, photolysis and thermal stress conditions. The drug degraded significantly under hydrolytic and oxidative stress conditions, whereas it was found to be stable in photolytic and thermal conditions. The mobile phase consisted of 0.1% formic acid and methanol in the ratio of (50:50, v/v). The flow rate was 0.5ml/min, column temperature 30°C, the injec¬tion volume was 20µL, and sample was monitored at 283nm using a PDA detector over a concentration range of 20 - 180μg/ml with correlation coefficient of 0.997. The developed LC method was validated as per ICH guideline Q2 (R1). The proposed method was found to be successively applied for the quality control of Fidarestat in bulk drug analysis.

Stability-indicating liquid chromatography method development for assay and impurity profiling of amitriptyline hydrochloride in tablet dosage form and forced degradation study.

Amitriptyline hydrochloride is an antidepressant drug with sedative effects used to treat the symptoms of anxiety, agitation with depression and schizophrenia with depression. A reversed-phase high-performance liquid chromatography method was developed to separate and quantitatively determine the assay and four organic impurities of amitriptyline in tablet dosage form and bulk drugs using a C18 column in an isocratic elution mode with mobile phase consisting of a mixture of pH7.5 phosphate buffer and methanol. The pH conditions used in the chromatographic separation are discussed. The stability-indicating characteristics of the proposed method were proved using stress testing [5m HCl at 80°C/1h, 5m NaOH at 80°C/1h, H2 O (v/w) at 80°C/1h, 6% H2 O2 (v/v) at 25°C/1h, dry heat at 105°C/24 h and UV-vis light/4days] and validated for specificity, detection limit, quantitation limit, linearity, precision, accuracy and robustness. For amitriptyline and its four known organic impurities, the quantitation limits, linearity and recoveries were in the ranges 0.25-3.0μg/ml (r2 > 0.999) and 87.9-107.6%, respectively. The mass (m/z) spectral data of amitriptyline hydrochloride and its impurity are discussed. The proposed LC method is also suitable for impurity profiling and assay determination of amitriptyline in bulk drugs and pharmaceutical formulations.

Physicochemical Stability of a Novel Tacrolimus Ophthalmic Formulation for the Treatment of Ophthalmic Inflammatory Diseases.

Tacrolimus is an immunosuppressant used to treat a large variety of inflammatory or immunity-mediated ophthalmic diseases. However, there are currently no commercial industrial forms available that can provide relief to patients. Various ophthalmic formulations have been reported in the literature, but their stability has only been tested over short periods. The objective of this study was to evaluate the physicochemical stability of a preservative-free tacrolimus formulation (0.2 and 1 mg/mL) at three storage temperatures (5 °C, 25 °C and 35 °C) for up to nine months in a multidose eyedropper. Analyses performed were the following: visual inspection and chromaticity, turbidity, viscosity, size of micelles, osmolality and pH measurements, tacrolimus quantification by a stability-indicating liquid chromatography method, breakdown product research, and sterility assay. In an in-use study, tacrolimus quantification was also performed on the drops emitted from the eyedroppers. All tested parameters remained stable during the nine month period when the eyedrops were stored at 5 °C. However, during storage at 25 °C and 35 °C, several signs of chemical instability were detected. Furthermore, a leachable compound originating from a silicone part of the eyedropper was detected during the in-use assay. Overall, the 0.2 mg/mL and 1 mg/mL tacrolimus ophthalmic solutions were physicochemically stable for up to nine months when stored at 5 °C.

Development and Validation of a Stability-Indicating Reversed-Phase Ultra High Pressure Liquid Chromatography Method for Assay of Delmopinol Hydrochloride and Estimation of Its Related Substances in Commercial Bulk Batches.

Delmopinol hydrochloride is widely used as an active ingredient (AI) in many human oral hygiene products. To the best of our knowledge (via literature search), there is no stability-indicating liquid chromatography method available in the public domain for assay and estimation of related substances of Delmopinol hydrochloride. A fast stability-indicating Reversed-Phase Ultra High-Performance Liquid Chromatography (RP-UHPLC) method has been developed and validated for identification, assay and estimation of related substances in commercial bulk batches of this AI. The major peak of the AI and its related compounds are adequately separated in 6min by a gradient elution on a hybrid silica-based C18 column (Waters Acquity UPLC® BEH C18, 50mm × 2.1mm I.D., 1.7μm particle size) maintained at 50°C. Mobile phase-A is composed of aqueous 10mM NH4OH and mobile phase-B is ACN. The AI and its related compounds are detected with UV detection at 220nm and quantitated by an external Delmopinol hydrochloride reference standard. The quantitation limit of the method is 0.1% of the target analytical concentration. This UHPLC method is fast and green and has been demonstrated to be specific, accurate, linear, precise, sensitive and robust as per ICH guidelines.

Stability-indicating LC Method for Quantification of Azelnidipine: Synthesis and Characterization of Oxidative Degradation Product

In the work presented here, the degradation behavior of azelnidipine under diverse forced degradation conditions was studied. A stability-indicating liquid chromatographic method was established which could separate and resolve azelnidipine from its degradation products. Further, chemical kinetics under acidic and alkaline conditions were studied, and validation studies were performed. Using reversed-phase chromatography, azelnidipine and its formed degradants were resolved using phosphate buffer (pH 3.0) and methanol in a mixture of 10:90% v/v as a mobile phase at a flow rate of 1.0 mL/min. All eluents were detected at a wavelength of 256 nm. Azelnidipine was degraded under acid, alkali, wet heat, and oxidized environment. The pH-dependent rate of hydrolysis of azelnidipine was studied under acidic and alkaline conditions and chemical kinetics were determined. Further, the oxidative degradation product of azelnidipine was synthesized and characterized as 3-(1-benzhydrylazetidin-3-yl) 5-isopropyl 2-amino-6-methyl-4-(3-nitrophenyl) pyridine-3,5-dicarboxylate (dehydro-AZD). The susceptibility of azelnidipine to hydrolysis was attributed to the presence of ester at 3 and 5 positions of 1,4 dihydropyridine. Further, under oxidative conditions, the aromatization of 1,4 dihydropyrinine resulted in dehydro-AZD. Azelnidipine followed the first-order reaction under acid and alkali hydrolysis, and was more susceptible to degradation under acidic conditions. The synthesized and confirmed dehydro-AZD was found as one of the metabolites and impurities of azelnidipine. The evaluated validation parameters ascertained the practicality of the method for the quantification of azelnidipine tablets.

Determination of the Chemical Stability of Dapagliflozin by LC/DAD and MS/MS Methods.

A simple and fast stability-indicating liquid chromatographic method with diode array detection (DAD) was developed and validated for the determination of dapagliflozin (DAPA) in bulk and tablets, in the presence of its major degradation products (DP). The drug was subjected to hydrolytic, oxidative, photolytic, thermal and humidity/thermal stress conditions, showing significant degradation under humidity/thermal with the formation of two DP, which were preliminarily identified by liquid chromatography with diode array detector coupled with electrospray ionization-tandem mass spectrometry (HPLC-DAD-ESI-MS/MS). Chromatographic separation of dapagliflozin and its DP was achieved with a core-shell RP-18 column, using acetonitrile and water as mobile phase in isocratic elution mode. The described method was linear over a range of 50-150μg/mL. For precision, the relative standard deviation (RSD) was <1.3%, the recovery was 99.64-100.11%, and the assay demonstrated adequate selectivity. The degradation kinetics of dapagliflozin was evaluated corresponding to first-order under thermal and humidity/thermal stress conditions. Dapagliflozin was well resolved from its drug products showing the power of stability-indicating of the method. The results showed that the proposed method was found to be suitable for routine analysis, quantitative determination and the stability study of dapagliflozin in pharmaceutical samples.

A Stability-Indicating Ultra Performance Liquid Chromato-Graphic (UPLC) Method for the Determination of a Mycophenolic Acid-Curcumin Conjugate and Its Applications to Chemical Kinetic Studies.

A simple, precise, and accurate reversed-phase ultra-performance liquid chromatographic (UPLC) method was developed and validated for the determination of a mycophenolic acid-curcumin (MPA-CUR) conjugate in buffer solutions. Chromatographic separation was performed on a C18 column (2.1 × 50 mm id, 1.7 µm) with a gradient elution system of water and acetonitrile, each containing 0.1% formic acid, at a flow rate of 0.6 mL/min. The column temperature was controlled at 33 °C. The compounds were detected simultaneously at the maximum wavelengths of mycophenolic acid (MPA), 254 nm, and curcumin (CUR), or MPA-CUR, at 420 nm. The developed method was validated according to the ICH Q2(R1) guidelines. The linear calibration curves of the assay ranged from 0.10 to 25 μg/mL (r2 ≥ 0.995, 1/x2 weighting factor), with a limit of detection and a limit of quantitation of 0.04 and 0.10 μg/mL, respectively. The accuracy and precision of the developed method were 98.4–101.6%, with %CV < 2.53%. The main impurities from the specificity test were found to be MPA and CUR. Other validation parameters, including robustness and solution stability, were acceptable under the validation criteria. Forced degradation studies were conducted under hydrolytic (acidic and alkaline), oxidative, thermal, and photolytic stress conditions. MPA-CUR was well separated from MPA, CUR, and other unknown degradation products. The validated method was successfully applied in chemical kinetic studies of MPA-CUR in different buffer solutions.

Stability of Compounded Clozapine 25 mg/mL and 50 mg/mL Suspensions in Plastic Bottles.

Clozapine oral suspension is not commercially available in Canada but is required for administration to patients who cannot swallow intact tablets. To evaluate the stability of 25 mg/mL and 50 mg/mL clozapine suspensions prepared in a 50:50 mixture of methylcellulose gel 1% and Oral Syrup (flavoured syrup vehicle, Medisca Pharmaceutique Inc) and stored in amber glycol-modified polyethylene terephthalate (PET-G) bottles over 120 days at 4°C and 25°C. This study used a validated reverse-phase stability-indicating liquid chromatographic method capable of quantifying clozapine, 3 known degradation compounds, a known impurity, and an unknown compound. Three separate batches of 25 mg/mL and 50 mg/mL clozapine suspensions were prepared, divided into 100-mL aliquots, and stored in 120-mL PET-G bottles. Half of the bottles from each concentration were stored at room temperature (20°C to 25°C) and the other half were stored in the refrigerator (2°C to 8°C). On study days 0, 28, 60, 90, and 120, concentrations of clozapine, each of the 3 known clozapine degradation products, a known impurity, and an unknown compound were determined. When suspensions were stored in PET-G containers at room temperature or under refrigeration for 120 days, the concentration of clozapine remained above 95% of initial concentration, and the measured concentration of degradation products and impurities did not exceed the 0.5% limits set by regulatory authorities worldwide. The proportion of the initial concentration of clozapine remaining on day 120, based on fastest degradation rate with 95% confidence (1-sided), exceeded 92%, and the only degradation product found (clozapine lactam, 0.2%) and an unknown impurity (0.2%) also did not exceed allowable limits. Compounded clozapine suspensions of 25 mg/mL and 50 mg/mL can be stored in amber PET-G containers for up to 120 days after preparation with storage at room temperature or under refrigeration.

Luliconazole: Stability-indicating LC method, structural elucidation of major degradation product by HRMS and in silico studies

Aim: A new stability-indicating liquid chromatography method was developed and validated for the quantitative determination of luliconazole. Materials and methods: Preliminary forced degradation study demonstrated an additional peak of the degradation product at the same retention time to the drug, due to this, the method was developed optimizing the chromatographic conditions to provide sufficient peak resolution (R ≥ 2). The experimental design was evaluated to assess the robustness and the best chromatographic conditions to be used for the validation. Methodology: Luliconazole solutions were exposed to various stress conditions to evaluate the method indication stability, in which the degradation product (DP-1) formed was isolated, identified, and evaluated in silico to predict degradation pathway and toxicity. The procedure was validated by robustness, selectivity, linearity, precision, and accuracy. Liquid chromatography was performed in a Phenomenex® RP-18 column with a mixture of acetonitrile and 0.3% (v/v) triethylamine solution as a mobile phase in isocratic elution. Results and conclusions: The method demonstrated robustness, good recovery, precision, linear response over a range from 5.0 to 40.0 μg.mL-1, and to be stability indicating. The alkaline stress condition resulted in the formation of DP-1. hrms studies identified this product as an hydroxyacetamide derivative, and in silico studies did not show toxic potential.

Analytical Techniques for the Estimation of Perindopril Erbumine: A Review

This paper includes different analytical methods available for the estimation of the Perindopril Erbumine. Perindopril Erbumine is an Angiotensin-Converting Enzyme (ACE) inhibitor used to treat hypertension and heart failure. The drug is officially listed in the monograph of USP, BP &amp; EP. This drug is available in various marketed formulations. There are so many methods reported for the estimation of Perindopril Erbumine and its related substances. Various methods including UVspectroscopic method, stability-indicating liquid chromatography method, Thermo-Radio, and Photostability study, Stability indicating UHPLC-DAD method, LC-MS/MS electrospray ionization validated method, and LC-MS/MS bioanalytical method are discussed in this paper.

Stability of Generic Formulations of Bortezomib 1.0 and 2.5 mg/mL in Vials and Syringes Stored at 4°C and Room Temperature (23°C or 25°C)

The availability of generic versions of bortezomib raises questions about the reliability of extrapolating stability data from one brand to another. To evaluate the stability of bortezomib formulations available from Janssen, Teva Canada, Actavis Pharma, Dr. Reddy's Laboratories, Apotex, and MDA, reconstituted with 0.9% sodium chloride (normal saline) to produce solutions of either 1.0 or 2.5 mg/mL and stored over at least 21 days under refrigeration (4°C) or at room temperature (either 23°C or 25°C) in the manufacturer's original glass vials or in polypropylene syringes. On study day 0, solutions with concentration 1.0 mg/mL or 2.5 mg/mL of the Teva, Actavis, Dr. Reddy's, Apotex, and MDA generic formulations were prepared. Three units of each type of container (glass vials and syringes) were stored at 4°C and 3 units at room temperature. Concentration and physical inspection were completed on at least 8 study days (including day 0) over a 21- to 84-day study period. Bortezomib concentrations were determined by a validated stability-indicating liquid chromatographic method with ultraviolet detection. The end point of these studies was the time to reach 90% of the initial concentration (T-90) with 95% confidence, which is expressed as "T-9095%CI", where CI refers to the confidence interval. In addition to estimating the T-9095%CI, differences in stability among products from all manufacturers were compared using multiple linear regression. Previously published data for the Janssen product were included in the overall comparisons. In all of the studies, the analytical method separated degradation products from bortezomib, such that the concentration of bortezomib was measured specifically, accurately (deviations < 2.5%), and reproducibly (average replicate error 2.5%). During all studies, solutions retained more than 94% of the initial concentration at 4°C. The T-9095%CI exceeded the study period for all formulations under all combinations of concentration, container, and temperature, except the 84-day study for the MDA product. Multiple linear regression showed no significant differences among manufacturers (p = 0.57). In this study, formulations of bortezomib currently marketed in Canada (by Janssen, Teva Canada, Actavis Pharma, Dr. Reddy's Laboratories, Apotex, and MDA) were pharmaceutically equivalent and interchangeable. Given that there was no difference in stability related to manufacturer, nominal concentration, or container, we conclude that these formulations are physically and chemically stable for at least 35 days under refrigeration and at least 25 days at room temperature.

Do Ophthalmic Solutions of Amphotericin B Solubilised in 2-Hydroxypropyl-γ-Cyclodextrins Possess an Extended Physicochemical Stability?

Fungal keratitis is a sight-threatening disease for which amphotericin B eye drops is one of the front-line treatments. Unfortunately, there are currently no commercial forms available, and there is little data concerning the long-term stability of compounded formulations based on intravenous dosages forms. New formulations of amphotericin B ophthalmic solutions solubilised with γ-cyclodextrins have shown promising in-vitro results, but stability data is also lacking. The objective of this study was therefore to investigate the stability of a formulation of ready-to-use amphotericin B solubilised in 2-hydroxypropyl-γ-cyclodextrins (AB-HP-γ-CD), for 350 days. An amphotericin B deoxycholate (ABDC) formulation was used as a comparator. Analyses used were the following: visual inspection, turbidity, osmolality and pH measurements, amphotericin B quantification by a stability-indicating liquid chromatography method, breakdown product research, and sterility assay. AB-HP-γ-CD formulation showed signs of chemical instability (loss of amphotericin B) after 28 and 56 days at 25 °C and 5 °C. Adding an antioxidant (ascorbic acid) to the formulation did not improve stability. ABDC formulation showed signs of physical instability (increased turbidy and amphotericin B precipitation) after 28 days and 168 days at 25 °C and 5 °C. As such, AB-HP-γ-CD formulation does not provide long-term stability for ophthalmic amphotericin B solutions.

Stability of Ophthalmic Atropine Solutions for Child Myopia Control.

Myopia is an ophthalmic condition affecting more than 1/5th of the world population, especially children. Low-dose atropine eyedrops have been shown to limit myopia evolution during treatment. However, there are currently no commercial industrial forms available and there is little data published concerning the stability of medications prepared by compounding pharmacies. The objective of this study was to evaluate the stability of two 0.1 mg/mL atropine formulations (with and without antimicrobiobial preservatives) for 6 months in two different low-density polyethylene (LDPE) multidose eyedroppers. Analyses used were the following: visual inspection, turbidity, chromaticity measurements, osmolality and pH measurements, atropine quantification by a stability-indicating liquid chromatography method, breakdown product research, and sterility assay. In an in-use study, atropine quantification was also performed on the drops emitted from the multidose eyedroppers. All tested parameters remained stable during the 6 months period, with atropine concentrations above 94.7% of initial concentration. A breakdown product (tropic acid) did increase slowly over time but remained well below usually admitted concentrations. Atropine concentrations remained stable during the in-use study. Both formulations of 0.1 mg/mL of atropine (with and without antimicrobial preservative) were proved to be physicochemically stable for 6 months at 25 °C when stored in LDPE bottles, with an identical microbial shelf-life.

A Validated Stability-Indicating Liquid Chromatographic Method for the Determination of Lorcaserin and Related Impurities in DRUG Substance Supported by Quality by Design.

Lorcaserin (LOR) is selective and potent antiobesity drug that targets the activation of the serotonin 5HT2C receptor. Here a novel, specific, sensitive stability indicating method was developed and validated for the quantitative determination of LOR and its process-related impurities using quality by design principles. By applying experimental design, the authors examine the multifactorial effect of parameters on the critical resolution pair and generated design space representing the robust design. LOR was subjected to stress condition and found stable at all condition, only found significant degradation at oxidative stress condition. The chromatographic separation of degradation product and its process-related impurities were achieved on a Phenomenox Luna phenyl-hexyl column (150×4.6mm×5μm), with mobile phase consisting of 10mM ammonium formate containing 0.1% ammonia solution; pH adjusted to 2.8 with trifluoroacetic acid as solvent A and methanol/acetonitrile (5/95) as solvent B delivered with gradient program at a flow rate of 1.0mL/min, column temperature was maintained at 25°C and analytes were monitored at 220nm. The injection volume was 5μL. The developed RP-LC method was validated and found linear, accurate, specific, selective, precise and robust. The structure of impurities was confirmed by direct mass analysis.