Body Stability Research Articles

Clinico-Radiological Outcome of Percutaneous Vertebroplasty in Dorso-Lumbar Osteoporotic Vertebral Compression Fractures (OVCFs)

Introduction: Vertebral compression fractures (VCFs) are the most common complication of osteoporosis where Percutaneous vertebroplasty is thought to immediately improve the pain and disability status via stabilization and reinforcement of the fractured body with polymethylmethacrylate (PMMA) injection. Purpose: To evaluate the clinical and radiological outcome of Percutaneous vertebroplasty in osteoporotic VCFs in Dorso-Lumbar (DL) Spine. Materials and methods: It is a prospective study carried out in Bangabandhu Sheikh Mujib Medical University (BSMMU) and different private hospitals in Dhaka, from January 2010 to March 2023. Total number of patients was 121 i.e., 92 female 29 male patients (167 treated vertebrae), age ranged from 65-85 years with mean age 73.40 years. 10 cases at D10 and D11 each, 26 cases at D12, 21 cases at L1, 15 cases at L2, 16 cases at D12-L1, 03 case at D9,12, 05 cases at D10,11, 07 cases at L1,2 and 03 case at D9,12L1 and 05 cases at D12,L1,2. Follow up ranged from 24 to 36 months and outcome assessed regarding neurological status (Radiculopathy and Myelopathy), pain [Visual Analogue Score (VAS)] and disability [Oswestry Disability Index (ODI) questionnaire]. Radiological assessment of the treated spine was done to identify any vertebral height gain (McKiernan method), kyphosis correction (Cobb`s method). Results: The mean age was 73.40 ± 03.75 years. 74(60.97%) patients were in 65-74 years age group. 105(63.41%) cases had single vertebral level, 49(29.26%) with 02 levels and 12(07.32%) with 03 levels involvement. D12 (n=53, 31.17%) and L1 (n=52, 31.13%) were most frequent. The age, sex, occupation, and the level of involvement had no significant difference (p>0.05, chi-squared test). VAS for pain had significantly improvement (p<0.05, paired t test) from preoperative 08.50±0.50 to 03.50±0.30 postoperatively and 02.80± 0.50 at 1 year. The preoperative ODI 71.11±09.69 improved significantly (p<0.05, paired t test) to 17.34±04.11 postoperatively and 09.76± 04.83% at 1 year. The kyphotic angle was corrected to 05°±02.50° at the 12 months follow up radiograph. One level (02.30%) had cement leakage which was evident on postoperative X-ray but was asymptomatic even on the last follow up. Conclusion: Percutaneous Vertebroplasty is a significantly effective technique for immediate and short-term pain relief, disability status improvement in Vertebral Compression Fractures (VCFs) with satisfactory radiological outcome in DL spine.

Analysis and monitoring of the behavior of a rock fill dam ten years after construction: a case study of the Iran-Madani Dam

AbstractIn this study we compared dam monitoring results with those of numerical analysis to propose a plan for the first reservoir impounding of the Iran-Madani Rock fill dam, ten years after the completion of its construction. The stability of the dam body has been assessed using numerical analysis and data obtained from sensors installed in the dam. The correctness and accuracy of the geotechnical parameters of the dam body materials were confirmed by comparing the results of numerical analysis and monitoring through back analysis. The linear correlation coefficients between the experimental data and the numerical results for settlement, pore water pressure, and total stress are 84%, 67%, and 99%, respectively. In addition, the agreement between the design assumptions with both the numerical analysis results and instrumentation data was examined. The arching ratio values obtained from instrumentation and numerical analysis in the core of the dam are 0.47 and 0.35, respectively, indicating the safety of the dam. Finally, a numerical sensitivity analysis was conducted to present a special impounding program for the dam, with a focus on controlling simultaneous changes in pore water pressure and effective stress in the clay core, ten years after the completion of the dam body construction.

Percutaneous kyphoplasty combined with pediculoplasty (PKCPP) augments and internally fixates the severe osteoporotic vertebral fractures: a retrospective comparative study.

Vertebral augmentation (VA) has emerged as a satisfactory and minimally invasive surgical approach for severe osteoporotic vertebral fractures (OVFs). However, treating severe OVFs with advanced collapse, burst morphology with MC injury, posterior wall retropulsion, high degree of osseous fragmentation, pediculo-somatic junction fracture, and large vacuum cleft presents significant challenges. This study aimed to evaluate the effectiveness of percutaneous kyphoplasty combined with pediculoplasty (PKCPP) in reducing refracture, preventing further collapse and bone cement displacement, reconstructing vertebral body (VB) stability, and providing internal fixation of the anterior column (AC), middle column (MC), and the bilateral pedicles. The current study was designed as a retrospective review of clinical and radiologic parameters. From July 2018 to September 2021, ninety-six patients with severe OVFs and without neurological deficit were treated either with simple percutaneous kyphoplasty (simple PKP group, n = 54) or with percutaneous kyphoplasty combined with pediculoplasty (PKCPP group, n = 42). All patients were followed up for at least 1year, and clinical and radiological outcomes were assessed. Surgery duration and bone cement volume were compared between the two groups, as well as analgesic dosage and hospital stay. Anterior wall height (AWH), posterior wall height (PWH), and Cobb angle (CA) were measured and analyzed before and after surgery. The simple PKP group had significantly shorter surgery duration and lower bone cement volume compared to the PKCPP group (P < 0.05). Conversely, the simple PKP group had significantly higher analgesic dosage and longer hospital stay than the PKCPP group (P < 0.05). Both groups showed significant improvements in AWH, PWH, and CA after surgery (P < 0.05). At the final follow-up, the PWH in the simple PKP group was significantly lower than the preoperative measurement (P < 0.05), and the difference in PWH between the two groups was statistically significant (P > 0.05). Moreover, both groups demonstrated a significant reduction in CA after surgery, with the PKCPP group showing a greater reduction compared to the simple PKP group throughout the postoperative period to the final follow-up (P < 0.05). VAS and ODI scores significantly decreased in both groups after surgery (P < 0.05), with no significant difference between the groups at the final follow-up (P > 0.05). However, the PKCPP group achieved better VAS scores than the simple PKP group at postoperative 1day, 1month, and 3months (P < 0.05), and the ODI in the PKCPP group was lower than the simple PKP group at 1month after surgery (P < 0.05). Furthermore, the overall complication rate in the PKCPP group was significantly lower than that in the simple PKP group (P < 0.05). If performed by appropriately trained surgeons, both PKP and PKCPP are safe and effective treatments for patients with severe OVFs. However, PKCPP offers additional benefits in the setting of bothersome fractures, including rapid pain relief, improved spinal stability, satisfactory restoration of vertebral body height, and better correction of kyphotic deformity. These promising results have been tested in a single center but require further confirmation in multiple centers.

Differences In Body Stability Between Older And Younger Adults During Continuous Turning

Differences In Body Stability Between Older And Younger Adults During Continuous Turning

Failure mechanism of loess landslide induced by water stagnation on the combined surface

In order to reveal the destructive mechanism of loess landslide induced by stagnant water on the combined surface, and to clarify the influence of the main control factors, this paper takes a typical loess landslide in northern Shaanxi as the research object, analyzes the structure of the rock and soil body, and the excavation and filling construction through the geohazard survey, and analyzes the process of traction sliding caused by the stagnant water on the combined surface at the different stages of the project by combining with the calculation of the stability of the slope body. Further the article analyses the process of traction sliding caused by water on the combined area due to construction by means of a discrete element model, and delves into the mechanism of strength reduction of saturated loess. The results show that: 1) the combined surface stagnant water type loess landslide has the characteristics of sudden sliding and rapid evolution, which is highly hazardous and difficult to prevent and control; 2) the slope destabilization is controlled by the engineering geological conditions, and the slope excavation changes the original mechanical equilibrium conditions of the slope, which provides the dynamic conditions for the traction sliding of the slope; 3) the change of the hydrogeological environment results in the obstruction of the natural drainage channel, which leads to the formation of continuous sliding surface due to stagnant water on the combined surface, and the formation of a continuous sliding surface due to stagnant water on the combined surface. Surface stagnant water to form a continuous slippery surface, inducing the overall destabilization of the slope damage; 4) loess strength index with the increase of saturation and the exponential function form of reduction, and when the saturation degree reaches more than 80%, the strength index of the soil body to reach the basic stability. The article expanding the ideas of landslide control and analysis, and the research results will provide a theoretical basis for the design of junction landslide management in the loess areas of northern Shaanxi.

Role of iron-rich clays on sintering of porcelain stoneware tiles

Porcelain stoneware traditionally contains low Fe2O3 (<1 wt%), limiting research on iron's effects beyond coloration to date. However, recent changes in the supply chain induced a shift towards resource efficiency and circular economy, which led to body formulations with Fe2O3 up to 2.5 wt%. This study investigates the impact of iron-rich clays on the firing behaviour of porcelain stoneware, focusing on sintering processes, Fe speciation, and physical properties of the vitreous phase. Results show that red clays influence vitrification paths and maximum densification temperature, as well as composition and properties of the melt. This occurs not only because the relatively high iron percentage (up to 1.7 wt%), but for a set of factors, like the overall mineralogical and chemical composition of batches. Iron turns to be crucial for the stability of ceramic bodies at high temperatures, since Fe3+ can partially reduce to Fe2+, releasing gases and contributing to bloating phenomena.

Peran Kekuatan Perut dalam Meningkatkan Performa Tolak Peluru pada Atlet

The aim of this research is to determine the role of abdominal strength in improving shot put performance in athletes. This research uses a literature review method by collecting information by looking for relevant references and facts from journals and theses that have been previously researched. The literature is then compared and linked to provide an overview of the topic under study. Qualitative research is used as a type of research. This research explores the role of abdominal muscle strength in improving shot put performance in athletes. Shot put requires the right combination of strength, technique and coordination to achieve optimal results. One key element that is often overlooked is abdominal muscle strength or core strength. This research outlines how abdominal muscle strength contributes to body stability, efficient energy transfer, and optimization of shot put technique. Through literature analysis and research findings, it was concluded that integrated abdominal strength training in athlete training programs can help improve shot put performance by optimizing stability, energy transfer and movement technique. The practical implication is the importance of including abdominal strength training in the training program to achieve maximum performance in shot put and reduce the risk of injury. Further research could explore more deeply the long-term influence of abdominal strength training on the performance of shot put athletes.

Impact of tango on Parkinson's disease - a narrative review

Introduction: Parkinson’s disease (PD) is a fast-growing neurodegenerative condition caused by the deficiency of dopamine (Bloem et al., 2021). Main symptoms include tremor, bradykinesia, muscular rigidity and postural instability (Ye et al., 2023). Although PD treatment primarily involves pharmacotherapy, physical activity-based treatments such as tango dance can improve the quality of life of patients. Aim of the study: This narrative review aims to assess the impact of the therapeutic benefits of tango dance therapy for people with PD. Materials and methods: A comprehensive literature search was conducted in the PubMed database up to 2024. The review included randomised controlled trials, case reports, and pilot studies focused on the impact of tango on PD. Results: Several studies have evaluated the impact of tango on patients with PD. Some of them found that tango improves dynamic balance and walking, reduces the risk of falling, improves body awareness, stability, and emotional well-being among patients with PD. Conclusions: The impact of tango on PD is not yet conclusively documented, and further research is needed.

Active impedance control based adaptive locomotion for a bionic hexapod robot

AbstractIn recent years, with the continuous development of human exploration of the natural world, there has been a growing demand across various fields for robots capable of free movement in diverse environments. In this study, we address the issue of compliant control for a hexapod robot in diverse environments and propose a novel control method based on an adaptive impedance model for position control. Our approach enables the hexapod robot to stabilize foot force on complex terrains while preserving balance and body height. Specifically, we analyze the algorithm's parameters and stability by establishing the hexapod robot's structural and impedance control models. To tackle this challenge, we introduce an adaptive impedance control algorithm that estimates environmental parameters using Lyapunov's asymptotic stability theorem and achieves tracking of actual foot‐end forces to desired foot forces. Furthermore, to ensure body stability and height, we incorporate attitude feedback and body feedback. Experimental results from foot force control experiments conducted on a multilegged robot demonstrate that our proposed algorithm enhances the adaptability and robustness of the robot. This research holds significant implications for the stable control of hexapod robots in complex environments and has promising practical applications.

Optimizing microseismic monitoring: a fusion of Gaussian–Cauchy and adaptive weight strategies

Abstract In mining mineral resources, it is vital to monitor the stability of the rock body in real time, reasonably regulate the area of ground pressure concentration, and guarantee the safety of personnel and equipment. The microseismic signals generated by monitoring the rupture of the rock body can effectively predict the rock body disaster, but the current microseismic monitoring technology is not ideal. In order to address the issue of microseismic monitoring in deep wells, this research suggests a machine learning-based model for predicting microseismic phenomena. First, this work presents the random spare, double adaptive weight, and Gaussian–Cauchy fusion strategies as additions to the multi-verse optimizer (MVO) and suggests an enhanced MVO algorithm (RDGMVO). Subsequently, the RDGMVO-Fuzzy K-Nearest Neighbours (RDGMVO-FKNN) microseismic prediction model is presented by combining it with the FKNN classifier. The experimental section compares 12 traditional and recently enhanced algorithms with RDGMVO, demonstrating the latter’s excellent benchmark optimization performance and remarkable improvement effect. Next, the FKNN comparison experiment, the classical classifier experiment, and the microseismic dataset feature selection experiment confirm the precision and stability of the RDGMVO-FKNN model for the microseismic prediction problem. According to the results, the RDGMVO-FKNN model has an accuracy above 89%, indicating that it is a reliable and accurate method for classifying and predicting microseismic occurrences. Code has been available at https://github.com/GuaipiXiao/RDGMVO.

Terrestrial locomotion stability of undulating fin amphibious robots: Separated elastic fin rays and asynchronous control

To address the problem of poor postural stability in an undulating fin robot during terrestrial locomotion, this study proposes a novel design featuring separate elastic fin rays with an asynchronous control scheme for bilateral fin surfaces. In this scheme, the robotic fin ray structure and surface driving mode are innovatively designed to mitigate the pitch-angle instability caused by adverse factors, such as integral rigid fin rays and synchronized fin surfaces. Expanding on the ground dynamics model of the robot, this study examined the variation in the pitch angle of the robot body. In this study, an innovative design with separated elastic fin rays was proposed and their feasibility was validated through finite element simulations. In addition, a virtual simulation prototype of the robot was developed to verify the robot body stability under asynchronous fin surface control. The simulation results show that separate elastic fin rays and asynchronous control can effectively improve the postural stability of robots in terrestrial locomotion. In this study, a robot prototype was tested experimentally in various terrestrial environments. The experimental results indicate that equipping the robot with separated elastic fin rays and employing asynchronous motion control significantly enhances the motion postural stability across typical terrain conditions. The maximum pitch angle range can be reduced by 42.7–52.4%, providing new insights for the design of amphibious robots with undulating fins.

Entertainment type robots based on machine learning and game teaching mode applied in dance action planning of art teaching

We studied the use of machine learning models for training dance action models, collected dance action data, annotated and classified it, and established a training set for dance action models. We trained the training set to learn the feature representation and pattern recognition capabilities of dance actions. Through training and tuning the model, a model that can accurately recognize and generate dance movements was obtained. Evaluate the similarity between two dance movements and select the appropriate dance movements to form a smooth dance sequence. A planning algorithm was designed based on the kinematic and dynamic characteristics of robots to generate dance action paths suitable for the robot’s body conditions. Considering factors such as joint limitations, body stability, and smooth movement of the robot, generate a reasonable dance motion path while ensuring safety. Through on-site testing and data analysis of the system, it has been verified that it can effectively generate diverse and expressive dance movements, bringing a unique viewing experience to entertainment venues.

Investigating viscoelastic properties and structural stability mechanisms of oil bodies emulsion gels: Role of non-intrinsic protein

This research aims to investigate the mechanism of the effect of intrinsic and non-intrinsic protein content on the stability of oil bodies (OBs) emulsion gels. We employed small amplitude oscillation shear (SAOS) and large amplitude oscillation shear (LAOS) to measure the linear and nonlinear rheological properties of the OBs emulsion gels. The SAOS test indicated that an increase in non-intrinsic protein content weakened the interaction between OBs, decreasing their storage modulus (G'). The LAOS test demonstrated that the increase in non-intrinsic protein content affected the structural recombination and destruction behavior of OBs emulsion gels under large strains. Overall, the content of non-intrinsic protein during the extraction process is a crucial factor affecting the stability of OBs emulsion gels. These findings provide insights into the potential strategies for improving oil extraction efficiency and offer a foundation for further investigation into the functional properties of OBs.

Trunk kinematics and limb movement of horses walking backwards and forwards in hand and lifting a single limb

Equine physiotherapy commonly includes basic exercises such as walking backward (BW) and voluntary lifting of single limbs (SLL), but trunk movements during these have not been studied. In order to compare the trunk kinematics during BW and SLL with forward walking (FW), nine horses were measured in FW, BW and during SLL triggered by tactile cue. Kinematics were obtained from skin markers captured by ten high-speed video cameras. Trunk angles were calculated in sagittal and horizontal planes from withers, dorsal to spinous processes of the 16th thoracic vertebra (T16), 2nd and 4th sacral vertebrae (S2, S4), WT16S2 and T16S2S4 respectively. From the hooves, maximum hoof height during swing phase and horizontal distance between hoof and median body plane during swing and stance phases were determined.Dorsoventral range of motion (ROM) and maximum flexion of WT16S2 was significantly larger in BW than in FW, while laterolateral ROM was significantly smaller during hindlimb swing phase in BW and SLL than in FW. In contrast, dorsoventral ROM of T16S2S4 was significantly smaller during stance and swing phases of hindlimbs in BW compared to FW, and throughout the movement. During forelimb swing phase, T16S2S4 ROM was significantly larger in BW than SLL. Hindhoof height in SLL was significantly higher than in FW. Distance between median body plane and hooves was significantly larger in BW than in FW, and significantly larger in BW than in SLL for hindlimb swing phase. In BW, increased lumbosacral stabilisation and the larger area of support created by fore- and hindlimbs may represent a strategy to enhance body stabilisation, as BW entails some insecurity.

Preliminary investigation of yaw stability in undulatory fish propulsion using stability derivatives

Fish are capable of maintaining a stable forward direction without yawing during long-distance movements. This long-term yaw stability has been investigated using static derivatives, revealing that undulatory locomotion is highly unstable. However, the present simulation of the perturbation development process shows that the yaw perturbation growth rate of the undulatory fish is an order of magnitude smaller than that of non-undulatory one. This study investigates the yaw stability of two-dimensional fish body undergoing the carangiform undulatory deformation by considering both the mean static and dynamic derivatives method. The results indicate that the yaw instability always occurs when the fish body is in undulatory propulsion or coasting model, and the undulation has stabilizing effect compared with the body straight in the uniform incoming flow. Analysis of the mean derivatives reveals that the stabilizing effect is due to the negative value of the dynamic derivative, which plays the role of damping, although the static derivative indicates that the yaw is unstable. Utilizing mean derivatives method can analyze qualitatively the linear stability at the equilibrium point, which cannot provide an assessment of overall stability.

Virtual reality training combined with physical therapy program for children with tibial eminence fracture: a randomized controlled trial

Background. Tibial eminence fracture is an injury referred to the interarticular portion of the neighbouring plateau of the tibia. Non-operative treatment is recommended for type I and II. The study aimed to investigate the effect of virtual reality (VR) training combined with a physical therapy program (PTP) in the management of children after tibial eminence fractures. Methods. Forty eight children suffering from tibial eminence fracture (type I and type II). Their age ranged from 7 to 14 years old. The control group (G1) received only a physiotherapy program (PTP) and the experimental group (G2) received the same PTP plus virtual reality (VR) in form of Wii Sport Training. Both groups received the treatment protocol for six successive months (3 sessions per week). Participants were assessed before and after the treatment for six successive months. The outcomes were range of motion (ROM) of knee joint using goniometry, knee pain using the visual analogue scale (VAS) and balance by Pediatric Balance Scale (PBS). Results. Post-treatment, there was a a statistically substantial difference in pain, PBS, knee flexion and extension ROM in both groups (P-value &lt; 0.05). Also, there was a statistically substantial difference in PBS and knee flexion ROM between the two groups (P-value &lt; 0.05), favouring the VR group. Conclusions. These findings from this study reveal the value of physical therapy combined with VR in the rehabilitation of children with tibial eminence fractures. Virtual reality used in conjunction with PTP enhances those children’s knee range of motion and body stability.

Virtual reality training combined with physical therapy program for children with tibial eminence fracture: a randomized controlled trial

Background. Tibial eminence fracture is an injury referred to the interarticular portion of the neighbouring plateau of the tibia. Non-operative treatment is recommended for type I and II. The study aimed to investigate the effect of virtual reality (VR) training combined with a physical therapy program (PTP) in the management of children after tibial eminence fractures. Methods. Forty eight children suffering from tibial eminence fracture (type I and type II). Their age ranged from 7 to 14 years old. The control group (G1) received only a physiotherapy program (PTP) and the experimental group (G2) received the same PTP plus virtual reality (VR) in form of Wii Sport Training. Both groups received the treatment protocol for six successive months (3 sessions per week). Participants were assessed before and after the treatment for six successive months. The outcomes were range of motion (ROM) of knee joint using goniometry, knee pain using the visual analogue scale (VAS) and balance by Pediatric Balance Scale (PBS). Results. Post-treatment, there was a a statistically substantial difference in pain, PBS, knee flexion and extension ROM in both groups (P-value &lt; 0.05). Also, there was a statistically substantial difference in PBS and knee flexion ROM between the two groups (P-value &lt; 0.05), favouring the VR group. Conclusions. These findings from this study reveal the value of physical therapy combined with VR in the rehabilitation of children with tibial eminence fractures. Virtual reality used in conjunction with PTP enhances those children’s knee range of motion and body stability.

Research on Influencing Factor and Optimmization Pathways of Physical Exercise Behavior Among Contemporary College Students

This study examined the physical activity abilities of contemporary college students by assessing muscle strength, muscle endurance, and body stability. The research examined aspects of their physical exercise behavior such as exercise frequency, focus, duration, and type. The results showed that the participants were predominantly female, freshmen, and medical students. Overall, college students scored at an average level in physical activity abilities; freshmen scored higher in muscle strength, while senior students scored higher in endurance. Additionally, senior students excelled in certain types of exercises. The study also found a negative correlation between muscle strength/body stability and exercise frequency, indicating a decrease in these abilities with increased exercise frequency. Conversely, other indicators showed a positive correlation with exercise frequency, suggesting an increase in exercise levels with higher physical activity levels as this can result in a page being rejected by search engines. Ensure that your abstract reads well and is grammatically correct.

Profiling biomechanical abilities during sprint front-crawl swimming using IMU and functional clustering of variabilities

ABSTRACT This study aims to profile biomechanical abilities during sprint front crawl by identifying technical stroke characteristics, in light of performance level. Ninety-one recreational to world-class swimmers equipped with a sacrum-worn IMU performed 25 m all-out. Intra and inter-cyclic 3D kinematical variabilities were clustered using a functional double partition model. Clusters were analysed according to (1) swimming technique using continuous visualisation and discrete features (standard deviation and jerk cost) and (2) performance regarding speed and competition calibre using respectively one-way ANOVA and Chi-squared test as well as Gamma statistics. Swimmers displayed specific technical profiles of intra-cyclic (smoothy and jerky) and inter-cyclic stroke regulation (low, moderate and high repeatability) significantly discriminated by speed (p < 0.001, η2 = 0.62) and performance calibre (p < 0.001, V = 0.53). We showed that combining high levels of both kinds of variability (jerky + low repeatability) are associated with highest speed (1.86 ± 0.12 m/s) and competition calibre (ℽ = 0.75, p < 0.001). It highlights the crucial importance of variabilities combination. Technical skills might be driven by a specific alignment of stroke pattern and its associated dispersion according to the task constraints. This data-driven approach can assist eyes-based technical evaluation. Targeting the development of an explosive swimming style with a high level of body stability should be considered during training of sprinters.

The Influence of Fatigue, Recovery, and Environmental Factors on the Body Stability of Construction Workers.

In the construction industry, falls, slips, and trips (FST) account for 42.3% of all accidents. The primary cause of FST incidents is directly related to the deterioration of workers' body stability. To prevent FST-related accidents, it is crucial to understand the interaction between physical fatigue and body stability in construction workers. Therefore, this study investigates the impact of fatigue on body stability in various construction site environments using Dynamic Time Warping (DTW) analysis. We conducted experiments reflecting six different fatigue levels and four environmental conditions. The analysis process involves comparing changes in DTW values derived from acceleration data obtained through wearable sensors across varying fatigue levels and construction environments. The results reveal the following changes in DTW values across different environments and fatigue levels: for non-obstacle, obstacle, water, and oil conditions, DTW values tend to increase as fatigue levels rise. In our experiments, we observed a significant decrease in body stability against external environments starting from fatigue Levels 3 or 4 (30% and 40% of the maximum failure point). In the non-obstacle condition, the DTW values were 9.4 at Level 0, 12.8 at Level 3, and 23.1 at Level 5. In contrast, for the oil condition, which exhibited the highest DTW values, the values were 10.5 at Level 0, 19.1 at Level 3, and 34.5 at Level 5. These experimental results confirm that the body stability of construction workers is influenced by both fatigue levels and external environmental conditions. Further analysis of recovery time, defined as the time it takes for body stability to return to its original level, revealed an increasing trend in recovery time as fatigue levels increased. This study quantitatively demonstrates through wearable sensor data that, as fatigue levels increase, workers experience decreased body stability and longer recovery times. The findings of this study can inform individual worker fatigue management in the future.