Spruce Logs Research Articles

Fungal trait‐environment relationships in wood‐inhabiting communities of boreal forest patches

Abstract Fungal traits can provide a mechanistic understanding of how wood‐inhabiting fungi interact with their environment and how that influences community assembly in deadwood. However, fungal trait exploration is relatively new and almost no studies measure fungal traits in their environment. In this study we tested species‐ and trait‐environment relationships in reproducing fungal communities inhabiting 571 Norway spruce (Picea abies) logs in 55 isolated forest patches (0.1–9.9 ha) of different naturalness types, located in Northern boreal Sweden. The studied patches were (1) semi‐natural set‐aside patches within highly managed landscapes, or (2) old‐growth natural patches located in an unmanaged landscape. We tested species and trait relationships to deadwood substrate and forest patch variables. We measured mean fruit body size and density for each of the 19 species within communities. Traits assembled in relation to log decay stage and forest patch naturalness, illustrating the important role of deterministic environmental filtering in shaping reproducing wood‐inhabiting fungal communities. Early decay stage communities had larger, less dense, annual fruiting bodies of half‐resupinate type and were more often white‐rot fungi. Species rich mid‐decay stage communities had mixed trait assemblages with more long lived perennial fruit bodies of intermediate size, and both brown‐ and white‐rot fungi equally represented. Finally, late decay stage communities had smaller, denser and perennial fruit bodies, more often of the brown‐rot type. The relationships between the studied traits and decay stages were similar in both set‐aside and natural patches. However, set‐aside semi‐natural patches in highly managed landscapes more frequently supported species with smaller, perennial and resupinate fruit bodies compared to natural patches in an unmanaged landscape. Synthesis. We found that log decay stage was the primary driver of fungal community assembly of species and traits in isolated forest patches. Our results suggest that decay stage filters four reproduction traits (fruit body density, size, lifespan and type) and one resource‐use trait (white or brown rot). Our results highlights, for the first time, that communities with diverse fungal reproductive traits are maintained foremost across all deadwood decay stages under different forest naturalness conditions. Read the free Plain Language Summary for this article on the Journal blog.

Debarking harvesters simultaneously combat the European spruce bark beetle (Ips typographus) and conserve non‐target beetle diversity

Abstract In the face of climate change, the European Spruce Bark Beetle (Ips typographus) breeding predominantly in Norway spruce (Picea abies) led to exceptional amounts of damaged timber in European forests. Up to now, if pest control is applied, damaged or weakened P. abies trees are either extracted by salvage logging or, when quantities are low, made unsuitable for breeding by manual debarking techniques. Both pest control interventions are costly, are often limited by the short timeframe of effectiveness and come with negative impacts on the non‐target biodiversity. As alternatives for timely removal, a debarking head for harvesters for large scale disturbances and a bark gouging device for motor‐manual treatment have been developed in recent years to make breeding material unsuitable for bark beetles and reduce existing larvae. Based on data from an experimental design with infested Norway spruce logs, we show that the harvester debarking head and the motor‐manual bark gouging regulate I. typographus populations efficiently, whereas a conventional harvester did not reduce the emerging bark beetles. Species assemblages of non‐target beetles living in the infested Norway spruce logs were altered from the natural species assemblages in control logs by processing logs with the debarking head or the bark gouging device but not by the conventional harvester. None of the bark treatments reduced non‐target beetle species richness in this experiment. Practical implication. We endorse the debarking head and bark gouging as alternatives to salvage logging and manual debarking. This uncouples pest control from in‐time dependencies on the availability of transport capacities. The debarking head and bark gouging open up the opportunity to retain dead wood biomass in the forest, supporting ecological benefits and conservation goals. Particularly for protected areas these two new management options better balance requirements of pest control and biodiversity conservation.

EVALUATION OF SELECTED MECHANICAL AND PHYSICAL PROPERTIES OF PARTICLEBOARDS CONTAINING WASTE PLASTICS

This article is focused on the research of particleboards (PB) composed of wood particles from spruce logs and recycled crushed plastic granulates. Crushed plastic granulates sized from 1.0 to 4.0 mm were obtained from worn automobiles by recycling, specifically painted and unpainted bumpers. The proportion of plastic granulate in the particleboards represented 10%, 15%, and 20% of the total weight of the composites. In the production of PB, urea-formaldehyde resin and paraffin emulsion were used as a binder and ammonium nitrate was used as a hardener. The aim of the article was to compare the selected properties of PB containing plastic filler with pure PB. Mechanical properties (tensile and bending strength), and physical properties (water absorption and thickness swelling) were evaluated according to EN 319, EN 310 and EN 317. Based on the results, it can be stated that the bending strength and physical properties of PB containing plastic filler were significantly better compared to pure PB. On the contrary, the tensile strength values were lower in most cases.

Interaction between regional temperature and shade level shapes saproxylic beetle communities

AbstractAimThe ‘concept of relative constancy of habitats’ assumes that species differ in their habitat preferences depending on the regional temperature so that all populations experience similar microclimatic conditions. Our aim was to assess the relevance of this concept by disentangling the effects of shade level and regional temperature on southern and northern distributed saproxylic (=dead wood dependent) beetle species.LocationSweden.MethodsWe established a field experiment by placing 435 logs of Norway spruce (Picea abies) along shade gradients in six regions differing in regional temperature (along a 1200 km latitudinal gradient). For each log, we sampled the saproxylic beetle community and calculated the Community Temperature Index (CTI), indicating to what extent the community is dominated by southern or northern species.ResultsSpecies richness and total abundance were better explained by shade level, whereas species composition was better explained by study region. In colder regions, CTI varied along the shade gradient, whereas in warmer regions, CTI was more similar along the shade gradient. Moreover, in colder regions, the number of southern species was higher in sun‐exposed logs, whereas in warmer regions, the number of southern species was higher in shaded logs. This supports the concept of relative constancy of habitats. In contrast, northern species preferred shaded conditions regardless of the regional temperature.Main ConclusionsRegional temperature, shade level and resulting microclimate are important drivers of species richness, total abundance and composition. Occurrence patterns of saproxylic beetle species follow to some extent the concept of relative constancy of habitats since their habitat preferences vary with regional temperature. Northern species are of conservation concern due to disadvantages by climate warming and clear‐cutting. They are favoured by preserving forests with rarely disturbed canopies.

Gene expression plasticity facilitates different host feeding in Ips sexdentatus (Coleoptera: Curculionidae: Scolytinae)

Host shift is ecologically advantageous and a crucial driver for herbivore insect speciation. Insects on the non-native host obtain enemy-free space and confront reduced competition, but they must adapt to survive. Such signatures of adaptations can often be detected at the gene expression level. It is astonishing how bark beetles cope with distinct chemical environments while feeding on various conifers. Hence, we aim to disentangle the six-toothed bark beetle (Ips sexdentatus) response against two different conifer defences upon host shift (Scots pine to Norway spruce). We conducted bioassay and metabolomic analysis followed by RNA-seq experiments to comprehend the beetle’s ability to surpass two different terpene-based conifer defence systems. Beetle growth rate and fecundity were increased when reared exclusively on spruce logs (alternative host) compared to pine logs (native host). Comparative gene expression analysis identified differentially expressed genes (DEGs) related to digestion, detoxification, transporter activity, growth, signalling, and stress response in the spruce-feeding beetle gut. Transporter genes were highly abundant during spruce feeding, suggesting they could play a role in pumping a wide variety of endogenous and xenobiotic compounds or allelochemicals out. Trehalose transporter (TRET) is also up-regulated in the spruce-fed beetle gut to maintain homeostasis and stress tolerance. RT-qPCR and enzymatic assays further corroborated some of our findings. Taken together, the transcriptional plasticity of key physiological genes plays a crucial role after the host shift and provides vital clues for the adaptive potential of bark beetles on different conifer hosts.

Time demands of traditional hand-hewing techniques for sustainable repair of wooden heritage structures: A comparative study

The hand-hewing of timber has been a fundamental skill for carpenters throughout history. Inevitably though, the majority of wood used in construction at the present time is processed with the use of machines. Repairing heritage objects with machined wood however, as opposed to working replacement timber using similar craft methods and tools as those used in the original, is often in conflict with the principles set forth in the Venice Charter for the Conservation and Restoration of Monuments and Sites. Ultimately, relying on mechanization is a missed opportunity to contribute to the preservation of valued intangible cultural heritage.Whereas the sustainability of traditional woodworking techniques and technologies can be promoted by applying them in the conservation of historical wooden buildings, the labor-intensive and time-consuming nature of manual woodworking makes feasibility questionable. In order to provide valuable insight for planners and monument care workers, the paper presents a study on the time demands associated with processing hand-hewn beams intended for use in the structural repair of wooden heritage objects.A series of experiments was conducted wherein a total of 94 beams 18×22 cm in profile and 2.5 m in length were hewn from spruce logs of various diameters. The relationship between initial log diameter and required processing time is presented as a linear function. The relative proportions of the individual steps to the hewing process as a whole were also documented and showed a clear dependency on the total amount of material removal required. The overall processing time was significantly reduced in the case of timber that was soaked for several months before being hewn into beams, and the low-work hewing technique was shown to be more efficient in comparison to high work on trestles.This paper has been published in memory of Petr Růžička, the great pioneer of forgotten carpentry techniques whose work opened a window to our past for future generations.

Natural deadwood hosts more diverse pioneering wood‐inhabiting fungal communities than restored deadwood

Deadwood can be recreated as a forest restoration measure to increase the amount of deadwood and assist deadwood‐dependent biodiversity. While deadwood restoration is known to have an overall positive effect on associated species in the long term, it remains poorly understood how and when wood‐inhabiting organisms colonize different kinds of deadwood, which is essential for developing efficient restoration frameworks. In this study, we use DNA metabarcoding to compare wood‐inhabiting fungal communities between fresh naturally fallen spruce logs and spruce logs felled for restoration. The results show that although pioneering fungal community composition greatly differs between natural and felled logs, with natural logs hosting more species‐rich and heterogeneous communities, felled logs still hold a relatively high fungal diversity. Responses to log type carried a strong phylogenetic signal, and orders Polyporales and Hymenochaetales including most species of conservation concern were more likely to occur in natural than in felled logs. Furthermore, we found that log type was more important for rarely recorded than commonly recorded taxa, suggesting that rare species might be more specialized in their habitat requirements than the common ones. Overall, while restored deadwood can hold a high fungal diversity, the results underline that freshly felled logs do not mimic fresh natural logs. Deadwood restoration should focus not only on increasing the quantity of deadwood but also on the quality of thereof, and most importantly, retaining the existing natural deadwood rather than artificially downing trees.

Effects of cutting speed and feed per knife on energy requirements for processing black spruce logs with a chipper-canter

The effects of cutting speed (CS), feed per knife (FK), and temperature condition on energy requirements for processing black spruce logs by a chipper-canter were assessed. Nine groups of 15 logs were tested at three CS (20, 25, and 30 m/s) and three FK (19, 25, and 32 mm). Each log was processed under frozen (−13 °C) and unfrozen (19 °C) conditions. Mean power increased as CS and FK increased. This behavior is explained by the mechanical relationships between the parameters and the rotation and feed speeds, as well as by the increase in the volume of wood cut. The energy consumption and the specific energy consumption increased as CS increased and FK decreased. For the three electrical criteria, more energy was consumed when processing frozen logs, which is due to the greater mechanical properties of wood. A positive relationship was identified between sapwood and heartwood moisture content, basic density, grain angle, and wood volume transformed into chips, as covariates, and the three energy criteria. These results give useful information on energy requirements to adjust cutting parameters of chipper-canters for a better energy management in sawmills.

Know When You Are Too Many: Density-Dependent Release of Pheromones During Host Colonisation by the European Spruce Bark Beetle, Ips typographus (L.)

Individuals across various animal species communicate their presence to conspecifics. Especially phytophagous and parasitoid insects with their brood developing on limited resources rely on chemical cues, such as host-marking pheromones, to reduce intraspecific competition. Bark beetles are phytophagous insects with some species being economically and ecologically relevant forest pests. Several of them use the volatile compound verbenone to inhibit attraction and reduce intraspecific competition. However, in the Eurasian spruce bark beetle, Ips typographus (L.), temporal emission patterns did so far not quite support the putative function of verbenone as an indicator of densely colonised host trees. More importantly, it is currently unclear how well verbenone emission is actually related to colonisation density and thus intraspecific competition. Here, we inoculated Norway spruce logs with I. typographus at two defined colonisation densities in the greenhouse and measured the emission of verbenone and its precursors α-pinene and verbenol over time. Verbenone emission was 3–7 times greater from colonised logs compared to decaying logs without beetles during the major part of larval development. Furthermore, our data supports the quantitative hypothesis, that the termination of attack on a tree is mediated by a cessation of the release of verbenol and continuous emission of verbenone. The latter is most likely a passively produced host-marking cue reflecting the actual density of conspecifics since per-beetle emission was unaffected by colonisation density. These findings shed new light on the regulation of bark beetle mass aggregations, which are currently causing previously unseen economic damages in temperate forests.

STRUCTURES OF THE ESTATE LAYOUT OF THE 14TH–FIRST HALF OF THE 16TH CENTURY IN THE MOSCOW KREMLIN BASED ON THE EXCAVATIONS IN THE GREAT GARDEN

The wooden structures that were part of the manor complexes of the 14th – the first half of the 16th century AD are the remains of above-ground structures and cellars dug into the ground. The latter were log frames placed in a pit dug for them. Most of the log frames were made of oak or young pine and spruce logs, which prevent researchers from obtaining a series of reliable dendrochronological dates. The above-ground (residential and economic) structures have survived in a worse condition, some of them perished in a fire at the end of the 15th century AD. Remains of ovens made of raw bricks are associated with residential buildings. The compact arrangement of the studied structures, the construction of cellars and ovens on the same site testifies to the stable layout of the estate space for a long time – from the 14th to the middle of the 16th century. At the end of the site functioning period, a very large cellar up to 5 m deep appeared on it, which could be related to the temporary court of Ivan III at the end of the 15th century.

Metagenomic Analysis of the Composition of Microbial Consortia Involved in Spruce Degradation over Time in Białowieża Natural Forest.

Deadwood plays an important role in forest ecology; its degradation and, therefore, carbon assimilation is carried out by fungi and bacteria. To quantify the abundance and distribution of microbial taxa inhabiting dead spruce logs fallen over a span of 50 years and the soil beneath, we used taxonomic profiling with NGS sequencing of hypervariable DNA fragments of ITS1 and 16S V3-V4, respectively. The analysis of sequencing data revealed a high level of diversity in microbial communities participating in the degradation of spruce logs. Differences in the relative abundance of microbial taxa between the samples of the wood that died in 1974 and 2014, and of the soil in its immediate vicinity, were visible, especially at the genus level. Based on the Lefse analysis significantly higher numbers of classified bacterial taxa were observed in the wood and soil samples from 2014 (wood: 1974-18 and 2014-28 taxa; soil: 1974-8 and 2014-41 taxa) while the number of classified fungal taxa was significantly higher in the wood and soil samples from 1974 (wood: 1974-17 and 2014-9 taxa; soil: 1974-57 and 2014-28 taxa). Most of the bacterial and fungal amplicon sequence variants (ASVs) unique to wood were found in the samples from 1974, while those unique to soil were detected in the samples from 2014. The ATR-FTIR method supported by CHN analysis revealed physicochemical changes in deadwood induced by the activity of fungal and bacterial organisms.

Life cycle assessment of sitka spruce forest products grown in Ireland

PurposeThe purpose of this study is to quantify the environmental impacts of Sitka spruce timber products harvested from the forestry sector in Ireland. This data is typically country-specific and is required to accurately quantify the environmental impacts associated with its production to better understand the impacts on the environment.MethodsA representative model utilising the ReCiPe midpoint approach is developed for the forest sector and the production of log products in Ireland from primary data collected from the national forestry agencies, boardmill and sawmills over a 12-month period, where the last two represent 100% and 67% of the national production volume, respectively. The model was analysed using Life Cycle Assessment (LCA) and the resulting environmental impacts of log production are presented for two different boundary conditions, namely ‘cradle-to-forest road’ and ‘cradle-to-factory gate’ which considers the transport of the logs for further processing.Results and discussionThe results are presented for the reference functional unit of 1 m3 of Sitka spruce log product but the results are also shown for 1 rotation of 1 ha of forest area, which allows comparisons with existing studies that utilise similar metrics such as a given area of forest. The results show that typically, clearfell operations are the most significant contributor to all impact categories. The contribution of the remaining operations in descending order of magnitude are thinning operations, forest road construction and maintenance, site preparation options, seedling production and finally forest maintenance operations. The extended model (‘cradle-to-factory gate’ model), which includes transport or delivery, has demonstrated a significant contribution due to transport alone where it was found to be responsible for, on average, 50% of each impact category presented (excluding land occupation) highlighting its significance.ConclusionsThe underlying Life Cycle Inventory (LCI) data, which quantifies the total outputs of emissions and substances to air, land and water, is presented. It can be seen that the contribution of different operations varies significantly dependent on the log type which provides important data which can be further incorporated into future studies for downstream products utilised in the construction industry.

Effect of tip path overlap on ring debarker performance of frozen and unfrozen black spruce logs

ABSTRACT The effect of the tip path overlap on debarking quality of unfrozen and frozen black spruce logs was studied. The power, energy consumption, and torque were also measured for both temperature conditions. The experiment consisted of debarking logs using three overlaps (8, 27, and 43%) at two temperatures (−12°C and +20°C). Debarking quality was evaluated by the proportion of bark remaining on log surfaces and by the amount of wood in bark residues. Log characteristics (dimensions, eccentricity, and knot features), bark/wood shear strength (BWSS), moisture content, and basic densities of sapwood, inner, and outer barks were measured and treated as covariates. Experiments revealed that tip path overlap affects debarking quality for both temperature conditions: the amount of bark remaining on log surfaces decreased, and the proportion of wood in bark residues increased as tip path overlap increased. In addition, the effects of bark/wood shear strength, the proportion of knot area and sapwood, inner and outer barks densities, and moisture content on debarking quality criteria were analyzed. The mean power, energy consumption, and torque increased as the tip path overlap increased. These parameters were also positively affected by the log diameter and BWSS for frozen logs. The results give helpful information to improve debarking quality within the studied range of overlaps, log characteristics, and debarking parameters with efficient energy use.

Regional climate affects habitat preferences and thermal sums required for development of the Eurasian spruce bark beetle, Ips typographus

In recent years, the outbreaks of the Eurasian spruce bark beetle (Ips typographus) have become more frequent and severe, while temperatures have been rising. Our understanding of the consequences of climate warming can be improved by comparing the performance of I. typographus between geographical regions with different climates. We applied that approach by placing out Norway spruce logs at sites selected along a 1300 km north–south gradient in Sweden to study the effect of regional climate and microclimate on I. typographus. To obtain a microclimatic gradient at each site, we placed the logs at sun-exposed edges and in the shaded inner forest (10 m or 50 m from stand edges). We assessed the probability of colonisation of I. typographus and the thermal sums required for complete development.The species’ habitat preferences differed along the climate gradient including six geographical regions: in cooler regions, a higher proportion of sun-exposed logs was colonised in comparison to the shaded ones, while that difference was much smaller in warmer regions. The thermal sum needed for development tended to increase with warmer regional climate. Seasonal thermal sum exceeded the requirements for development of two generations per year in all three shade levels in the warmest region while in the coldest region two generations were only possible in some of the sun-exposed logs.Outbreaks of I. typographus are more frequent and severe in regions with a warmer climate, and our study reveals two explanations for this: first, I. typographus has more suitable breeding sites in warmer regions, as shaded logs inside the forest offer additional suitable habitat; second, the potential population growth increases with the probability of completing two fully established generations per year. We recommend that after storm-fellings, wind-felled trees are removed before they are colonised by I. typographus to decrease the outbreak risk. The observed difference in habitat preferences between geographical regions implies that, in cooler sites in the north, it is enough to remove recently wind-felled spruces that are sun-exposed, such as along edges, while in the south, also trees in more shaded conditions inside forests are a suitable substrate for I. typographus. In a warming climate, the increased risk and severity of I. typographus outbreaks is a factor making it less attractive to use Norway spruce in forestry.

The response of lichens inhabiting exposed wood of spruce logs to post-hurricane disturbances in Western Carpathian forests

We investigated which of the following environmental factors: the number of years since the windthrow of the tree (the age of dead wood), the phytocenosis (the type of forest community), altitude, exposure, wood hardness and the spatial scale of forest disturbances (small gaps with a few fallen spruces vs large-area windthrows) contributed to the diversity and abundance of lichens inhabiting the exposed wood of windthrown spruce trees in Polish Western Carpathian forests. Both Shannon H index and sum of coverage coefficients rose with increasing age of the wood, levelling off after 11–14 y (diversity) and 14–17 y (abundance). This factor appeared to be the most important for this group of lichens, but the significant positive impact of large-area windthrows on the lichen abundance was also demonstrated by using a GLM model. The age of the wood we precisely determined on the basis of data on Norway spruce mortality collected annually in permanent plots of the Gorce National Park since 2000. Using the Shore durometer we linked the course of the wood-inhabiting lichen succession with wood decay more precisely than before. The largest number of species was associated with medium hard wood, i.e., 51 < x ≤ 80 on the Shore scale. Based on the NMDS analysis, we distinguished four age groups of logs, differing in lichen abundance and defined by the dominance of distinctive species. A large number of usually corticolous lichen species used the wood of windthrown spruce logs as an optional habitat to survive large-scale, post-hurricane forest disturbances.

SINGLE-YEAR 14C DATING OF THE LAKE-FORTRESS AT ĀRAIŠI, LATVIA

ABSTRACT Single-year 14C sampling of a spruce log from the timber platform on which the Āraiši lake-fortress was built dates this timber exactly, by synchronization with AD 774/5 Miyake event. Dendrochronological synchronisms between the dated log and other timbers provide annual precision for the construction of the site. The felling date obtained, AD 835, is 50–60 years later than that proposed previously (Meadows and Zunde 2014) on the basis of a wiggle-match between 14C ages of decadal blocks and the IntCal13 calibration curve (Reimer et al. 2013), although the same 14C data favor a felling date in the AD 830s when wiggle-matched to IntCal20 (Reimer et al. 2020). Our results appear to confirm doubts expressed by Philippsen et al. (2022) about IntCal20 values from ca. AD 825-835.

Patterns and driving factors of ecological stoichiometry in system of deadwood and soil in mountains forest ecosystem

The aim of our research was to identify the factors that most strongly determine the C, N and P cycles in the deadwood—soil system in mountains forest ecosystems. We assumed that the climatic conditions resulting from the location in the altitude gradient and rate of deadwood decomposition most strongly determine the C/N/P stoichiometry. A climosequence approach comprising north (N) and south (S) exposure along the altitudinal gradient (600, 800, 1000 and 1200 m a.s.l.) was set up. Spruce logs at different decomposition stages (III, IV and V) were selected for the analysis in Babiogórski National Park (southern Poland). We calculated the C/N/P stoichiometry for deadwood and soil samples to reflect the nutrient availability. Our research indicates a very strong influence of the location conditions in the altitude gradient on the C/N/P stoichiometry. The GLM analysis confirmed the importance of high elevation in shaping the C, N and P content. A strong correlation was confirmed between P content, N content and C/N ratio. A higher C/N/P ratio was found in deadwood compared to soil, regardless of location. Decaying wood is an important source of N and P and the degree of decomposition made a significant contribution to explaining the variability of C, N and P content. The obtained results indicate the need to leave deadwood in forest ecosystems in order to improve biogeochemical cycles. Deadwood, by having a beneficial effect on many components of the forest ecosystem, will improve its biodiversity and, consequently, its stability.

Brown Coal and Logwood Combustion in a Modern Heating Appliance: The Impact of Combustion Quality and Fuel on Organic Aerosol Composition.

Residential heating with solid fuels is one of the major drivers for poor air quality in Central and Eastern Europe, and coal is still one of the major fuels in countries, such as Poland, the Czech Republic, and Hungary. In this work, emissions from a single-room heater fueled with brown coal briquettes (BCBs) and spruce logs (SLs) were analyzed for signatures of inorganic as well as semivolatile aromatic and low-volatile organic constituents. High variations in organic carbon (OC) emissions of BCB emissions, ranging from 5 to 22 mg MJ-1, were associated to variations in carbon monoxide (CO) emissions, ranging from 900 to 1900 mg MJ-1. Residential BCB combustion turned out to be an equally important source of levoglucosan, an established biomass burning marker, as spruce logwood combustion, but showed distinct higher ratios to manosan and galactosan. Signatures of polycyclic aromatic hydrocarbons emitted by BCB combustion exhibited defunctionalization and desubstitution with increasing combustion quality. Lastly, the concept of island and archipelago structural motifs adapted from petroleomics is used to describe the fraction low-volatile organic compounds in particulate emissions, where a transition from archipelago to island motifs in relation with decreasing CO emissions was observed in BCB emissions, while emissions from SL combustion exhibited the island motif.

Myxomycetes associated with Nowellia curvifolia on decorticated spruce logs

Myxomycetes associated with Nowellia curvifolia on decorticated spruce logs

Odors Attracting the Long-Legged Predator Medetera signaticornis Loew to Ips typographus L. Infested Norway Spruce Trees

Predatory long-legged flies of the genus Medetera are important, but currently understudied, natural enemies of Scolytinae bark beetles such as Ips typographus. Medetera flies lay eggs on beetle-infested trees, where the developing larvae find their prey, but the chemical cues used by Medetera to locate infested trees are currently unknown. To identify odors attracting Medetera signaticornis, a species in Europe, headspace samples were collected at several time-points through different stages of I. typographus attacks on logs of Norway spruce (Picea abies). The headspace samples were analyzed using combined gas chromatography and mass spectrometry (GC–MS), and gas chromatography coupled with electroantennographic detection (GC-EAD) to determine compounds that stimulate M. signaticornis antennae. Antennae of M. signaticornis males and females were found to detect (–)-cis-verbenol, ( +)-trans-verbenol and myrtenol, which are known to be produced by bark beetles. Antennal responses were also observed for verbenene, isoterpinolene, α-pinene oxide, camphor, pinocamphone, terpinene-4-ol, myrtenal, borneol, α-terpineol, geranyl acetone, and verbenone, which are primarily produced by microorganisms, and α-pinene, α-fenchene, β-pinene, camphene, 3-carene, limonene, γ-terpinene, and terpinolene, known spruce tree compounds. In field experiments testing two synthetic blends containing 18 antennal active and two additional compounds 2-methyl-3-buten-2-ol and ipsdienol we observed significant attraction of M. signaticornis within 24 h. These attractive blends can form the basis for development of Medetera monitoring lures for use in future forest and pest management.