Spray-dried Amorphous Solid Dispersions Research Articles

The challenge of downstream processing of spray dried amorphous solid dispersions into minitablets designed for the paediatric population – A sustainable product development approach

Poorly water-soluble drugs present a significant challenge in the development of oral solid dosage forms (OSDs). In formulation development the appropriate use of excipients to adjust solubility, and the choice of manufacturing method and pharmaceutical processes to obtain a dosage form to meet the needs of the patient group, is crucial. Preparing an amorphous solid dispersion (ASD) is a well-established method for solubility enhancement, and spray drying (SD) a common manufacturing method. However, the poor flowability of spray dried materials poses a significant challenge for downstream processing. Promoting sustainability in OSD development involves embracing a versatile formulation design, which enables a broader spectrum of patients to use the product, as opposed to altering existing dosage forms retrospectively. The objective of the current study was to develop a formulation of spray dried indomethacin ASD suited to the production, by direct compression, of instant release paediatric minitablets. Excipients evaluated were PVP or HPMCAS in solid dispersions at the preformulation phase, and MCC and lactose as a filler in direct compression. From the studied formulations, a 3:1 ratio blend of Vivapur 200/Pharmatose 200 M (MCC/lactose) with 0.5% (w/w) magnesium stearate was found to be the most promising in tableting, and minitablets containing a 6.22% content of spray-dried ASD of indomethacin/PVP K 29–32 could be obtained with desired tablet hardness and pharmaceutical quality, complying with tests of weight variation and fast disintegration in an aqueous environment. As a case example, this study provides a good foundation for further studies in harnessing a sustainable approach to the development of pharmaceutical formulations that can appropriately serve different patient sub-populations.

Evaluation of a spray-dried amorphous solid dispersion formulation of ID11916, a new molecular entity with dual inhibition mechanisms targeting the androgen receptor and phosphodiesterase type-5

Evaluation of a spray-dried amorphous solid dispersion formulation of ID11916, a new molecular entity with dual inhibition mechanisms targeting the androgen receptor and phosphodiesterase type-5

Evaluation of Pharmacobezoar Formation from Suspensions of Spray-Dried Amorphous Solid Dispersions: An MRI Study in Rats

Spray-dried amorphous solid dispersions of new chemical entities and pH-dependent soluble polymer hydroxypropyl methylcellulose acetate succinate (HPMC-AS) were found to form solid agglomerates in the gastrointestinal tract of rodents after oral administration. These agglomerates, referring to descriptions of intra-gastrointestinal aggregated oral dosage forms termed pharmacobezoars, represent a potential risk for animal welfare. Previously, we introduced an in vitro model to assess the agglomeration potential of amorphous solid dispersions from suspensions and how it can be reduced. In this work, we investigated if the in vitro effective approach of viscosity enhancement of the vehicle used to prepare suspensions of amorphous solid dispersions could reduce the pharmacobezoar formation potential following repeated daily oral dosing to rats as well. The dose level of 2400 mg/kg/day used in the main study was determined in a dose finding study carried out in advance. In the dose finding study, MRI investigations were carried out at short time intervals to gain insights into the process of pharmacobezoar formation. Whereas MRI investigations underlined the importance of the forestomach for the formation of pharmacobezoars, viscosity enhancement of the vehicle reduced the incidence of pharmacobezoars, delayed the onset of pharmacobezoar formation and reduced the overall mass of pharmacobezoars found at necropsy.

Preparation of Free-Flowing Spray-Dried Amorphous Composites Using Neusilin®.

A highly porous additive, Neusilin®, with high adsorption capability is investigated to improve bulk properties, hence processability of spray-dried amorphous solid dispersions (ASDs). Griseofulvin (GF) is applied as a model BCS class 2 drug in ASDs. Two grades of Neusilin®, US2 (coarser) and UFL2 (finer), were used as additives to produce spray-dried amorphous composite (AC) powders, and their performance was compared with the resulting ASDs without added Neusilin®. The resulting AC powders that included Neusilin® had greatly enhanced flowability (flow function coefficient (FFC) > 10) comparable to larger particles (100μm) yet had finer particle size (< 50μm), hence retaining the advantage of fast dissolution rate of finer sizes. Dissolution results demonstrated that achieved GF supersaturation for AC powders with Neusilin® was as high as 3 times that of crystalline GF concentration and was achieved within 30min. In addition, 80% of drug was released within 4min. The flowability improvement for AC powders with Neusilin® was more significant as compared to spray-dried ASDs without Neusilin®. Thus, the role of Neusilin® in flowability improvement was evident, considering that spray-dried AC with Neusilin® UFL2 has higher FFC than ASDs having a similar size. Lastly, the AC powders retained a fully amorphous state of GF after 3-month ambient storage. The overall results conveyed that the improved flowability and dissolution rate could outweigh the loss of drug loading resulted by addition of Neusilin®.

Pharmacobezoar Formation From HPMC-AS-Containing Spray-Dried Formulations in Nonclinical Safety Studies in Rats

Changing the physical state from crystalline to amorphous is an elegant method to increase the bioavailability of poorly soluble new chemical entity (NCE) drug candidates. Subsequently, we report findings from repeat-dose toxicity studies of an NCE formulated as a spray-dried amorphous solid dispersion (SD-ASD) based on hydroxypropyl methylcellulose acetate succinate (HPMC-AS) in rats. At necropsy, agglomerates of SD-ASD were found in the stomach and small intestine, which in reference to literature were termed pharmacobezoars. We interpreted the pH-dependent insolubility of HPMC-AS in the acidic gastric environment to be a precondition for pharmacobezoar formation. Gastric pharmacobezoars were not associated with clinical signs or alterations of clinical pathology parameters. Pharmacobezoar-correlated histopathological findings were limited to the stomach and consisted of atrophy, erosion, ulcer, and inflammation, predominantly of the nonglandular mucosa. Pharmacobezoars in the small intestines induced obstructive ileus with overt clinical signs which required unscheduled euthanasia, prominent alterations of clinical pathology parameters indicative of hypotonic dehydration, degenerative and inflammatory processes in the gastrointestinal tract, and secondary renal findings. The incidence of pharmacobezoars increased with dose and duration of dosing. Besides the relevance of pharmacobezoars to animal welfare, they limit the non-observed adverse effect level in nonclinical testing programs and conclusively their informative value.

An In Vitro Model to Investigate the Potential of Solid Dispersions to Form Pharmacobezoars.

The formation of pharmacobezoars from suspensions of spray-dried amorphous solid dispersions (SD-ASDs) of new chemical entities (NCEs) and hydroxypropyl methylcellulose acetate succinate (HPMC-AS) represents a non-compound related adverse effect in preclinical oral toxicity studies in rodents. Whereas the contribution of the insolubility of the carrier polymer to this process taking place in the acidic environment of the rodent stomach is conclusive, unawareness of the extent of in vivo pharmacobezoar formation is adverse. In order to evaluate the risk of pharmacobezoar formation before in vivo administration, we subsequently introduce an in vitro model to assess the agglomeration potential of solid dispersions. To verify that the pharmacobezoar formation potential can be assessed based on the observed agglomeration potential, we conducted a sequence of experiments with two HPMC-AS-based SD-ASD formulations. In vitro, we found their different in vivo pharmacobezoar formation potential reflected by a significantly increased agglomerated mass of formulation 1 per day compared to formulation 2. In order to find an approach to reduce the agglomeration potential of solid dispersion from suspensions, we further applied the model to investigate the impact of the viscosity of the vehicle used to prepare suspensions on agglomerate formation.

Development of an enhanced formulation to minimize pharmacokinetic variabilities of a weakly basic drug compound

Formulating poorly water soluble, weakly basic drugs with consistent exposure is often a challenge due to pH-dependent solubility. When the oral formulation is exposed to different pH ranges in the gastrointestinal (GI) tract, drug precipitation, or incomplete dissolution may occur resulting in decreased drug absorption and higher intra- and inter-patient pharmacokinetic (PK) variabilities. In the present study, a series of enhanced formulations containing organic acids and/or surfactants were developed and compared with conventional formulations with respect to their in vitro dissolution performance. The formulation containing 5% citric acid and 1% sodium lauryl sulfate (SLS) showed much less variations in dissolution performance at different pH conditions than a conventional formulation. The combination of citric acid and SLS demonstrated a synergistic effect as compared to use of citric acid alone or in combination with PEG4000 as a precipitation inhibitor. When compared with a conventional formulation and a spray-dried amorphous solid dispersion (ASD) formulation in a dog PK study, the enhanced formulation demonstrated the least AUC and C max variability between the two gastric pH-controlled groups. In conclusion, an enhanced formulation using a combination of organic acid and surfactant is recommended for weakly basic drug compounds to minimize drug PK variabilities in clinical studies.

Surface nanocoating of high drug-loading spray-dried amorphous solid dispersions by atomic layer coating: Excellent physical stability under accelerated storage conditions for two years

Physical instability remains a major concern with amorphous solid dispersions (ASDs). In addition to bulk crystallization inhibition, another potential strategy to improve the physical stability of ASDs is surface engineering. However, coating processes are extremely challenging for ASD microparticles. Herein, we describe for the first time the application of atomic layer coating (ALC), a solvent-free technique, to deposit a pinhole-free, ultra-thin film of aluminum oxide onto the surface of spray-dried ASD particles containing high drug loadings of ezetimibe with hydroxypropyl methylcellulose acetate succinate. ALC affords excellent control over the thickness, uniformity and conformality of the coating at the atomic scale. The freshly prepared coated ASD powders exhibited less agglomeration, a lower hygroscopicity, as well as improved wettability, flowability and compressibility compared to the uncoated samples. Under accelerated storage conditions, crystallization was detected in the uncoated 50% and 70% drug loading ASDs after only a few days, whereas the coated samples showed no evidence of physical instability for two years. Consequently, there was a dramatic decrease in the drug release from the uncoated ASDs during storage, while little change was observed for the coated samples. Using ALC for surface nanocoating of ASD paves the way for the development of higher drug loading ASD without compromising physical stability, thereby reducing the pill burden.

Downstream processing of spray-dried ASD with hypromellose acetate succinate – Roller compaction and subsequent compression into high ASD load tablets

Despite wide commercial application of hypromellose acetate succinate (HPMCAS) in spray-dried amorphous solid dispersion (ASD) drug products, little information is available in the references on downstream processing of spray-dried dispersions with HPMCAS. Poor flow and high dilution factor are a challenge in formulating spray-dried ASDs into tablets, leaving little space for other excipients facilitating binding and disintegration. Direct compression is not possible due to the poor powder flow of spray-dried ASDs. Moisture has to be avoided due to the plasticizing properties of water on the ASD, resulting in reduced stability of the amorphous state. Thus, dry granulation by roller compaction and subsequent tablet compression is the preferred downstream process. We report the investigation of downstream processing by roller compaction and tablet compression of a high load formulation with 75% of spray-dried amorphous solid dispersion (Nifedipine:HPMCAS 1:2). A head to head comparison of microcrystalline cellulose/croscarmellose (MCC/cl-NaCMC) as binder/disintegrant vs. MCC and low-substituted hydroxypropyl cellulose (L-HPC) as excipient for binding and disintegration showed improved re-workability of the formulation with MCC/L-HPC after roller compaction. Upon transfer to the rotary press, a 45% higher tensile strength of tablets is observed after dry granulation with MCC/L-HPC.

Effect of Hypromellose Acetate Succinate Substituents on Miscibility Behavior of Spray-dried Amorphous Solid Dispersions: Flory–Huggins Parameter Prediction and Validation

• Theoretical predictions and validation of miscibility was investigated. • Gibbs-composition phase diagram predicts the composition dependent miscibility. • Substituent ratios have significant effect on miscibility and drug loading. • Higher succinoyl content leads to higher dissolution efficiency. • Non-polar drugs show higher miscibility with HG grade, but low dissolution. This study reports the impact of physicochemical properties of lipophilic drugs such as Fenofibrate (FBT), Itraconazole (ITZ), Efavirenz (EFV) and Hydroxypropyl Methylcellulose Acetate Succinate (HPMCAS) grades on the miscibility, dissolution, and stability of the spray dried Amorphous Solid Dispersions (ASDs). The miscibility between of the drugs and HPMCAS grades was predicted using solubility parameter-derived Flory-Huggins interaction parameter and later phase diagram was constructed to delineate the composition dependent miscibility. By varying the HPMCAS grade−drug combinations and loadings, the amorphicity of prepared ASDs was analyzed using Differential Scanning Calorimetry (DSC), X-Ray Diffraction (XRD) and in vitro dissolution experiments were conducted to measure apparent solubility and finally, investigate the interplay between substituent ratio and functionality. Interactions between the drugs and polymeric grades and drug concentration in polymer is crucial in determining the drug precipitation within the ASDs which is further supported by Fourier Transform Infrared Spectroscopy (FTIR). The dissolution efficiency and dissolution rate of the ASDs were dependent on the acetyl-succinoyl ratio in HPMCAS.

Amorphous Solid Dispersion Tablets Overcome Acalabrutinib pH Effect in Dogs.

Calquence® (crystalline acalabrutinib), a commercially marketed tyrosine kinase inhibitor (TKI), exhibits significantly reduced oral exposure when taken with acid-reducing agents (ARAs) due to the low solubility of the weakly basic drug at elevated gastric pH. These drug–drug interactions (DDIs) negatively impact patient treatment and quality of life due to the strict dosing regimens required. In this study, reduced plasma drug exposure at high gastric pH was overcome using a spray-dried amorphous solid dispersion (ASD) comprising 50% acalabrutinib and 50% hydroxypropyl methylcellulose acetate succinate (HPMCAS, H grade) formulated as an immediate-release (IR) tablet. ASD tablets achieved similar area under the plasma drug concentration–time curve (AUC) at low and high gastric pH and outperformed Calquence capsules 2.4-fold at high gastric pH in beagle dogs. In vitro multicompartment dissolution testing conducted a priori to the in vivo study successfully predicted the improved formulation performance. In addition, ASD tablets were 60% smaller than Calquence capsules and demonstrated good laboratory-scale manufacturability, physical stability, and chemical stability. ASD dosage forms are attractive for improving patient compliance and the efficacy of acalabrutinib and other weakly basic drugs that have pH-dependent absorption.

Developing pH-Modulated Spray Dried Amorphous Solid Dispersion of Candesartan Cilexetil with Enhanced In Vitro and In Vivo Performance.

Candesartan cilexetil (CC), a prodrug and highly effective antihypertensive agent, is a poorly soluble (BCS Class II) drug with limited bioavailability. Here, we attempted to improve CC’s bioavailability by formulating several CC-loaded amorphous solid dispersions with a hydrophilic carrier (PVPK30) and pH modifier (sodium carbonate) using the spray drying technique. Solubility, in vitro dissolution, and moisture content tests were used for screening the optimized formulation. We identified an optimized formulation of CC/PVPK30/SC, which at the ratio of 1:0.5:1 (w/w/w) exhibited a 30,000-fold increase in solubility and a more than 9-fold enhancement in dissolution compared to pure CC. Solid-state characterization revealed that in pH-modulated CC amorphous solid dispersion (CCSDpM), CC’s crystallinity was altered to an amorphous state with the absence of undesirable interactions. Stability studies also showed that the optimized formulation was stable with good drug content and drug release under accelerated conditions of up to 4 weeks and real-time stability conditions of up to 12 weeks. Furthermore, pharmacokinetic parameters, such as AUC and Cmax of candesartan, had a 4.45-fold and 7.42-fold improvement, respectively, in CCSDpM-treated rats compared to those in the CC-treated rats. Thus, these results suggest that CCSDpM is highly effective for increasing oral absorption. The application of these techniques can be a viable strategy to improve a drug’s bioavailability.

QbD approach to downstream processing of spray-dried amorphous solid dispersions – a case study

In the current study, we demonstrate a structured approach to downstream process development for spray dried amorphous solid dispersions. Direct compression is generally not suitable due to typically poor flow of spray dried powders in tablets. Roller compaction (RC) is therefore the method of choice to enable spray dried dispersion downstream processing. Here, a structured experimental design of RC process parameters was used. The objective was to identify process conditions that lead to improved powder flow without compromising tablet robustness. Ten blends were compacted using different process parameters, and subsequently compressed into tablets. The impact of process parameters on granules and tablet properties was analyzed. We demonstrate that compaction force, gap and mesh aperture have major impact on RC outcomes. A combination of large gap and low force was identified as optimum combination of RC process parameters leading to powder flow improvement that could guarantee low tablet weight variation and at the same prevented loss of blend compressibility.

Development of spray-dried amorphous solid dispersions of tadalafil using glycyrrhizin for enhanced dissolution and aphrodisiac activity in male rats

Tadalafil (TDL) is a phosphodiesterase-5 inhibitor (PDE5I), indicated for erectile dysfunction (ED). However, TDL exhibits poor aqueous solubility and dissolution rate, which may limit its application. This study aims to prepare amorphous solid dispersion (ASD) by spray-drying, using glycyrrhizin-a natural drug carrier. Particle and physicochemical characterizations were performed by particle size, polydispersity index measurement, yield, drug content estimation, Fourier Transformed Infrared (FTIR) spectroscopy, Differential scanning calorimetry (DSC), X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and dissolution study. In order to evaluate the aphrodisiac activity of the prepared ASD, sexual behavior study was performed in male rats. It is further considered for the stability study. Our results revealed that TDL-GLZ spray-dried dispersion was a successful drug-carrier binary mixture. XRD and SEM showed that ASD of TDL with GLZ presented in the amorphous state and dented-spherical shape, unlike the drug indicating crystalline and spiked shaped. The optimized ASD3 formulation with particle size (1.92 µm), PDI (0.32), yield (97.78%) and drug content (85.00%) showed 4.07 folds’ increase in dissolution rate compared to pure TDL. The results obtained from thein vivostudy exhibit significantly improved aphrodisiac activity with ASD3. The stability study revealed that the prepared ASD3 did not show any remarkable changes in the dissolution and drug content for 1 month storage at room temperature.

Water-Induced Phase Separation of Spray-Dried Amorphous Solid Dispersions.

Spray drying is widely used in the manufacturing of amorphous solid dispersion (ASD) systems due to its fast drying rate, enabling kinetic trapping of the drug in amorphous form. Spray-drying conditions, such as solvent composition, can have a profound impact on the properties of spray-dried dispersions. In this study, the phase behavior of spray-dried dispersions from methanol and methanol–water mixtures was assessed using ritonavir and copovidone [poly(vinylpyrrolidone-co-vinyl acetate) (PVPVA)] as dispersion components. The resultant ASDs were characterized using differential scanning calorimetry (DSC), fluorescence spectroscopy, X-ray photoelectron spectroscopy (XPS), as well as surface-normalized dissolution rate (SNDR) measurements. Quaternary phase diagrams were calculated using a four-component Flory–Huggins model. It was found that the addition of water to the solvent system can lead to phase separation during the spray-drying process. A 10:90 H2O/MeOH solvent system caused a minor extent of phase separation. Phase heterogeneity in the 50 and 75% drug loading ASDs prepared from this spray solvent can be detected using DSC but not with other techniques used. The 25% drug loading system did not show phase heterogeneity in solid-state characterization but exhibited a compromised dissolution rate compared to that of the miscible ASD prepared from H2O-free solvent. This is possibly due to the formation of slow-releasing drug-rich phases upon phase separation. ASDs prepared with a 60:40 H2O/MeOH solvent mixture showed phase heterogeneity with all analytical methods used. The surface composition of dispersion particles as measured by fluorescence spectroscopy and XPS showed good agreement, suggesting surface drug enrichment of the spray-dried ASD particles prepared from this solvent system. Calculated phase diagrams and drying trajectories were consistent with experimental observations, suggesting that small variations in solvent composition may cause significant changes in ASD phase behavior during drying. These findings should aid in spray-drying process development for ASD manufacturing and can be applied broadly to assess the risk of phase separation for spray-drying systems using mixed organic solvents or other solvent-based processes.

In Vitro and In Vivo Behaviors of KinetiSol and Spray-Dried Amorphous Solid Dispersions of a Weakly Basic Drug and Ionic Polymer†.

Oral delivery of poorly water-soluble, weakly basic drugs may be problematic based on the drugs' intrinsic properties. Many drugs in this subset have overcome barriers to delivery following successful formulation as amorphous solid dispersions (ASDs). To process drugs as ASDs, multiple commercially relevant technologies have been developed and become well understood. However, ASD-producing technologies like spray drying and KinetiSol produce ASDs with vastly differing particle characteristics. Ultimately, the objective of this study was to assess whether processing an ASD of identical composition utilizing two different ASD-producing technologies (KinetiSol and spray drying) may impact the oral bioavailability of a weakly basic drug. For this study, we selected a weakly basic drug (Boehringer Ingelheim research compound 639667, BI 667) and processed it with an anionic polymer (hypromellose acetate succinate MMP grade (HPMCAS-MMP)) to evaluate whether the processing technology could modulate drug release in acidic and neutral media. Multiple characterization techniques (specific surface area (SSA), particle size distribution (PSD), scanning electron microscopy (SEM)) were utilized to evaluate the surface characteristics and differences in particles produced by KinetiSol and spray drying. Molecular interactions and drug-polymer miscibility of the processed particles were assessed using Fourier transform infrared spectroscopy and solid-state nuclear magnetic resonance, respectively. In vitro nonsink, pH-shift dissolution in biorelevant media and dissolution/permeation studies were conducted to better understand the release of BI 667 based on processing technology and particle size distribution. Finally, an in vivo male Beagle dog study was conducted to assess the impact of processing technology on oral bioavailability. In this study, we demonstrate that particles produced by KinetiSol have enhanced oral bioavailability compared with spray-dried particles when delivering a weakly basic drug processed with an anionic polymer. The findings of this study demonstrate that by utilizing KinetiSol, drug release may be controlled such that supersaturation in acidic media is inhibited and supersaturation of the drug is designed to occur in neutral media, ultimately enhancing oral bioavailability.

Development and Characterization of Spray-dried Amorphous Solid Dispersion of Sildenafil: In vivo Evaluation

Development and Characterization of Spray-dried Amorphous Solid Dispersion of Sildenafil: In vivo Evaluation

Understanding Molecular Interactions in Rafoxanide-Povidone Amorphous Solid Dispersions from Ultrafast Magic Angle Spinning NMR.

In solid dosage formulations, probing intermolecular interactions between active pharmaceutical ingredients (APIs) and polymeric excipients, which have a mechanistic impact on physical stability as well as bioavailability, remains a challenge. In recent years, solid-state NMR spectroscopy has been demonstrated to be a powerful tool to provide structural details with an atomic resolution of therapeutic organic compounds and formulation products. However, conventional 13C-detected techniques often suffer from poor resolution and low sensitivity due to the disordered structure of certain materials such as amorphous pharmaceuticals and 13C natural abundance, hindering in-depth investigations. In this study, we utilize the magic angle spinning (MAS) technique with ultrafast speeds (UF-MAS: νR = 60 and 110 kHz) and demonstrate the enabled methods with 1H detection to study the amorphous molecular complex of rafoxanide and povidone in the solid state. The downfield shift of the RAF amide proton, resolved under UF-MAS, and its correlations with aliphatic protons of PVP, serve as strong evidence of the existence of intermolecular hydrogen bonding. Two-dimensional (2D) 1H-detected 1H{13C} and 1H-1H correlation experiments, interestingly, exhibit distinct API-polymer interactions in the spray-dried amorphous solid dispersions (ASDs), utilizing aqueous and organic cosolvents and organic solvents mixtures. The rich intermolecular interactions in the aqueously prepared ASDs presumably contribute to the physical stability, and the interactions are retained in the solution state to maintain supersaturation for an enhanced dissolution profile. This study presents the first application of UF-MAS NMR characterization of therapeutic solid dosages at a spinning frequency of 110 kHz and uncovers the molecular mechanisms of solvent-mediated pharmaceutical dispersions.

Spray-Dried Amorphous Solid Dispersions of Griseofulvin in HPC/Soluplus/SDS: Elucidating the Multifaceted Impact of SDS as a Minor Component

This study aimed to elucidate the impact of a common anionic surfactant, sodium dodecyl sulfate (SDS), along with hydroxypropyl cellulose (HPC) and Soluplus (Sol) on the release of griseofulvin (GF), a poorly soluble drug, from amorphous solid dispersions (ASDs). Solutions of 2.5% GF and 2.5%–12.5% HPC/Sol with 0.125% SDS/without SDS were prepared in acetone–water and spray-dried. The solid-state characterization of the ASDs suggests that GF–Sol had better miscibility and stronger interactions than GF–HPC and formed XRPD-amorphous GF, whereas HPC-based ASDs, especially the ones with a lower HPC loading, had crystalline GF. The dissolution tests show that without SDS, ASDs provided limited GF supersaturation (max. 250%) due to poor wettability of Sol-based ASDs and extensive GF recrystallization in HPC-based ASDs (max. 50%). Sol-based ASDs with SDS exhibited a dramatic increase in supersaturation (max. 570%), especially at a higher Sol loading, whereas HPC-based ASDs with SDS did not. SDS did not interfere with Sol’s ability to inhibit GF recrystallization, as confirmed by the precipitation from the supersaturated state and PLM imaging. The favorable use of SDS in a ternary ASD was attributed to both the wettability enhancement and its inability to promote GF recrystallization when used as a minor component along with Sol.

Spray-Dried Amorphous Solid Dispersions of Atorvastatin Calcium for Improved Supersaturation and Oral Bioavailability.

Over the past few decades, the amorphous solid dispersions (ASDs) technique has emerged as a promising strategy to enhance the in vitro/in vivo characteristic of hydrophobic drugs. The low aqueous solubility and poor bioavailability of atorvastatin calcium (ATO), a lipid-lowering drug, present challenges for effective drug delivery. The objective of this work was to improve the aqueous solubility, in vitro dissolution, and oral absorption of ATO with amorphous solid dispersion technique prepared by spray-drying method. The optimized ternary formulation comprising of ATO; hydroxypropyl methylcellulose (HPMC), as a hydrophilic polymer; and sodium lauryl sulfate (SLS), as a surfactant, at a weight ratio of 1/1/0.1, showed significant improvement in aqueous solubility by ~18-fold compared to that of the free drug, and a cumulative release of 94.09% compared to a release of 59.32% of the free drug. Further, physicochemical studies via scanning electron microscopy, differential scanning calorimetry, and powder X-ray diffraction revealed a change from the crystalline state of the free drug to its amorphous state in the ASD. Pharmacokinetic analysis in rats demonstrated 1.68- and 2.39-fold increments in AUC and Cmax, respectively, in the ASD over the free drug. Altogether, hydrophilic carrier-based ASDs prepared by the spray-drying technique represent a promising strategy to improve the biopharmaceutical performance of poorly soluble drugs.