Spinning Solid-state Nuclear Magnetic Resonance Research Articles

Cross polarization stability in multidimensional NMR spectroscopy of biological solids

Magic-angle spinning (MAS) solid-state nuclear magnetic resonance (SSNMR) spectroscopy is a powerful and versatile technique for probing structure and dynamics in large, insoluble biological systems at atomic resolution. With many recent advances in instrumentation and polarization methods, technology development in SSNMR remains an active area of research and presents opportunities to further improve data collection, processing, and analysis of samples with low sensitivity and complex tertiary and quaternary structures. SSNMR spectra are often collected as multidimensional data, requiring stable experimental conditions to minimize signal fluctuations (t1 noise). In this work, we examine the factors adversely affecting signal stability as well as strategies used to mitigate them, considering laboratory environmental requirements, configuration of amplifiers, and pulse sequence parameter selection. We show that Thermopad® temperature variable attenuators (TVAs) can partially compensate for the changes in amplifier output power as a function of temperature and thereby ameliorate one significant source of instability for some spectrometers and pulse sequences. We also consider the selection of tangent ramped cross polarization (CP) waveform shapes, to balance the requirements of sensitivity and instrumental stability. These findings collectively enable improved stability and overall performance for CP-based multidimensional spectra of microcrystalline, membrane, and fibrous proteins performed at multiple magnetic field strengths.

Controlled Sublimation Rate of Guest Drug from Polymorphic Forms of a Cyclodextrin-Based Polypseudorotaxane Complex and Its Correlation with Molecular Dynamics as Probed by Solid-State NMR.

Encapsulation of active pharmaceutical ingredients (APIs) in confined spaces has been extensively explored as it dramatically alters the molecular dynamics and physical properties of the API. Herein, we explored the effect of encapsulation on the molecular dynamics and physical stability of a guest drug, salicylic acid (SA), confined in the intermolecular spaces of γ-cyclodextrin (γ-CD) and poly(ethylene glycol) (PEG)-based polypseudorotaxane (PPRX) structure. The sublimation tendency of SA encapsulated in three polymorphic forms of the γ-CD/PEG-based PPRX complex, monoclinic columnar (MC), hexagonal columnar (HC), and tetragonal columnar (TC), was investigated. The SA sublimation rate was decreased by 3.0-6.6-fold and varied in the order of MC form > HC form > TC form complex. The 13C and 1H magic-angle spinning (MAS) solid-state nuclear magnetic resonance (NMR) spectra and 13C spin-lattice relaxation time (T1) indicated that the encapsulated SA molecules existed as the monomeric form, and its molecular mobility increased in the order of MC form > HC form > TC form complex. In the complexes, a rapid chemical exchange between two dynamic states of SA (free and bound) was suggested, with varying adsorption/desorption rates accounting for its distinct molecular mobility. This adsorption/desorption process was influenced by proton exchange at the interaction site and interaction strength of SA in the complexes, as evidenced by 1H MAS spectra and temperature dependency of the 13C carbonyl chemical shift. A positive correlation between the molecular mobility of SA and its sublimation rate was established. Moreover, the molecular mobility of γ-CD and PEG in the complexes coincided with that of SA, which can be explained by fast guest-driven dynamics. This is the first report on the stability improvement of an API through complexation in polymorphic supramolecular host structures. The relationship between the molecular dynamics and physical properties of encapsulated API will aid in the rational design of drug delivery systems.

Redox Chemistries for Vacancy Modulation in Plasmonic Copper Phosphide Nanocrystals.

Copper phosphide (Cu3-xP) nanocrystals are promising materials for nanoplasmonics due to their substoichiometric composition, enabling the generation and stabilization of excess delocalized holes and leading to localized surface plasmon resonance (LSPR) absorption in the near-IR. We present three Cu-coupled redox chemistries that allow postsynthetic modulation of the delocalized hole concentrations and corresponding LSPR absorption in colloidal Cu3-xP nanocrystals. Changes in the structural, optical, and compositional properties are evaluated by powder X-ray diffraction, electronic absorption spectroscopy, 31P magic-angle spinning solid-state nuclear magnetic resonance spectroscopy, and elemental analysis. The redox chemistries presented herein can be used to access nanocrystals with LSPR energies of 660-890 meV, a larger range than has been possible through synthetic tuning alone. In addition to utilizing previously reported redox chemistries used for copper chalcogenide nanocrystals, we show that the largest structural and LSPR modulation is achieved using a divalent metal halide and trioctylphosphine. Specifically, nanocrystals treated with zinc iodide and trioctylphosphine have the smallest unit-cell volume (295.2 Å3) reported for P63cm Cu3-xP, indicating more Cu vacancies than have been previously observed. Overall, these redox chemistries present valuable insight into controlling the optical and structural properties of Cu3-xP.

Ionic salt cocrystals studied via multinuclear solid-state magnetic resonance: a case study of lithium 4-methoxybenzoate:L-proline polymorphs

Lithium salts continue to find pharmaceutical applications, particularly as psychiatric medications. As with any active pharmaceutical ingredient, structural polymorphism is an important concern for lithium-based medications that can influence solubility and other physicochemical properties. Here we report a 13C, 1H, and 7Li magic-angle spinning solid-state nuclear magnetic resonance (MAS SSNMR) study of two 1:1 polymorphic ionic cocrystals of lithium 4-methoxybenzoate and L-proline (L4MPRO(α) and L4MPRO(β)). One-dimensional 13C cross-polarization MAS and two-dimensional heteronuclear correlation NMR spectra hint at differential mobilities of the proline and benzoate moieties for the two polymorphs. Five key resonances differ in 13C chemical shift by more than 1 ppm between the two polymorphs, clearly distinguishing between them. Gauge-including projector-augmented-wave density functional theory calculations of 13C and 1H magnetic shielding constants correlate strongly with the experimental chemical shifts for both polymorphs. R2 and root-mean-square deviation metrics are shown to be insufficient in the case of 13C, but sufficient in the case of 1H, for differentiating between the polymorphs. 7Li satellite-transition MAS NMR of both polymorphs are identical, as are the computed lithium magnetic shielding constants, demonstrating the insensitivity of 7Li NMR to polymorphism in these samples. This work highlights the utility of solid-state NMR spectroscopy for examining ionic salt cocrystals and also highlights some caveats in this regard.

The temperature increase in carbon materials during magic-angle spinning solid-state nuclear magnetic resonance measurements

The temperature increase in carbon materials during magic-angle spinning solid-state nuclear magnetic resonance measurements

Polarization Amplification in Dynamic Nuclear Polarization Magic-Angle Spinning Solid-State Nuclear Magnetic Resonance by Solubilizing Traditional Ionic Salts.

Dynamic nuclear polarization can improve the sensitivity of magic-angle spinning solid-state NMR experiments by 1-2 orders of magnitude. In aqueous media, experiments are usually performed using the so-called DNP juice, a glycerol-d8/D2O/H2O mixture (60/30/10, v/v/v) that can form a homogeneous glass at cryogenic temperatures. This acts as a cryoprotectant and prevents phase separation of the paramagnetic polarizing agents (PAs) that are added to the mixture to provide the source of electron spin polarization required for DNP. Here, we show that relatively high 1H DNP enhancements (∼60) can also be obtained in water without glycerol (or other glass forming agents) simply by dissolving high concentrations of electrolytes (such as NaCl or LiCl), which perturb the otherwise unavoidable ice crystallization observed upon cooling, thereby reducing PA phase separation and restoring DNP efficiency.

Borosilicate sol–gel bioactive glasses and the effect of borate content on structure-property relationships

AbstractBorate-doped silicate glasses with chemical compositions of (70 − x)SiO2–xB2O3–30CaO (x = 0, 5, 15, and 25, in mol%) were synthesized using the sol–gel method, intended to be used in tissue regeneration. The effects of borate content on the glass surface morphology, chemical structure, ion dissolution behavior, and fibroblast compatibility were investigated. 11B magic angle spinning-solid state nuclear magnetic resonance and Fourier transform infrared spectra demonstrated that borate, in the glasses, possessed both three- and four-coordinated structures. From nitrogen sorption, the specific surface area of the glasses decreased with increased borate content and calcination temperature, from 600 °C to 700 °C. In the case of glasses undergoing calcination at 700 °C, silicate and calcium ion released in a Tris–HCl buffer solution (pH = 7.4) at the early stage of the immersion test decreased as borate content increased. The decrease in surface area caused by stabilizing at 700 °C due to the effect of increasing borate concentration controlled the ion dissolution behavior of the glasses. The proliferation ability of fibroblasts cultured with the dissolution products of the glasses were improved as borate content increased in the glass composition. Graphical Abstract

Anticooperativity and Competition in Some Cocrystals Featuring Iodine-Nitrogen Halogen Bonds.

Phenomena such as anticooperativity and competition among non-covalent bond donors and acceptors are key considerations when exploring the polymorphic and stoichiomorphic landscapes of binary and higher-order cocrystalline architectures. We describe the preparation of four cocrystals of 1,3,5-trifluoro-2,4,6-triiodobenzene with N-heterocyclic compounds, namely acridine, 3-aminopyridine, 4-methylaminopyridine, and 1,2-di(4-pyridyl)ethane. The cocrystals, which are characterized by single-crystal and powder X-ray diffraction experiments, all show moderately strong and directional iodine⋅⋅⋅nitrogen halogen bonds with reduced distance parameters ranging from 0.79 to 0.92 and carbon-iodine⋅⋅⋅nitrogen bond angles ranging from 165.4(3) to 175.31(7)°. The cocrystal comprising 1,3,5-trifluoro-2,4,6-triiodobenzene and acridine provides a relatively rare example where all three halogen bond donor sites form halogen bonds with three acceptor molecules, overcoming an anticooperative effect. This effect manifests itself through the lengthening of non-halogen-bonded C-I bonds, weakening their potential to form halogen bonds. The effect is only observed once two halogen bonds have been formed to 1,3,5-trifluoro-2,4,6-triiodobenzene; one such bond does not appear to be adequate. Among the four cocrystals studied, competition between the pyridyl nitrogen atoms and the amine nitrogen atoms suggests that the former are the preferred halogen bond acceptors. Analysis by Hirshfeld fingerprint plots and 13 C and 19 F magic-angle spinning solid-state nuclear magnetic resonance (NMR) spectroscopy provides additional insights into the prevalence of various short contacts in the crystal structures and into the spectral response to halogen-bond-induced cocrystallization.

Long-range ordered porous carbons produced from C60.

Carbon structures with covalent bonds connecting C60 molecules have been reported1-3, but their production methods typically result in very small amounts of sample, which restrict the detailed characterization and exploration necessary for potential applications. We report the gram-scale preparation of a new type of carbon, long-range ordered porous carbon (LOPC), from C60 powder catalysed by α-Li3N at ambient pressure. LOPC consists of connected broken C60 cages that maintain long-range periodicity, and has been characterized by X-ray diffraction, Raman spectroscopy, magic-angle spinning solid-state nuclear magnetic resonance spectroscopy, aberration-corrected transmission electron microscopy and neutron scattering. Numerical simulations based on a neural network show that LOPC is a metastable structure produced during the transformation from fullerene-type to graphene-type carbons. At a lower temperature, shorter annealing time or by using less α-Li3N, a well-known polymerized C60 crystal forms owing to the electron transfer from α-Li3N to C60. The carbon K-edge near-edge X-ray absorption fine structure shows a higher degree of delocalization of electrons in LOPC than in C60(s). The electrical conductivity is 1.17 × 10-2 S cm-1 at room temperature, and conduction at T < 30 K appears to result from a combination of metallic-like transport over short distances punctuated by carrier hopping. The preparation of LOPC enables the discovery of other crystalline carbons starting from C60(s).

Chemical shift tensors as probes of chalcogen bonds: solid-state NMR study of telluradiazole-XCN− (X = O, S, Se) salt cocrystals

We report experimental 125Te magic-angle spinning solid-state nuclear magnetic resonance (MAS NMR) measurements of the tellurium chemical shift (CS) tensors in three [K(18-crown-6)]+ 3,4-dicyano-1,2,5-telluradiazole-XCN− (X = O, S, Se) salt cocrystals featuring chalcogen bonds. These data are compared to those for pure 3,4-dicyano-1,2,5-telluradiazole (1). A reduction in the span of the 125Te CS tensor is consistently noted in the salt cocrystals compared to pure 1. Isotopically 15N-labelled [K(18-crown-6)]+[1-OC15N]−, which features a chalcogen bond between Te and the cyanate nitrogen atom, is synthesized using KOC15N, and the nitrogen CS tensors are measured for both samples via 15N slow MAS NMR spectroscopy. Possible dynamic disorder of the cyanate ions in KOCN is ruled out. Two crystallographically distinct nitrogen sites are resolved for the salt cocrystal. Upon formation of [K(18-crown-6)]+[1-OC15N]−, the 15N isotropic CS and CS tensor span both decrease relative to the values for pure KOC15N, and the axial symmetry of this tensor is lost. These findings are supplemented with a series of density functional theory calculations of magnetic shielding tensors using cluster models or periodic boundary conditions. Inclusion of spin–orbit relativistic effects in the calculation of tellurium shielding tensors is particularly important in achieving agreement with experiment.

Sensitivity-Enhanced Multidimensional Solid-State NMR Spectroscopy by Optimal-Control-Based Transverse Mixing Sequences.

Recently, proton-detected magic-angle spinning (MAS) solid-state nuclear magnetic resonance (NMR) spectroscopy has become an attractive tool to study the structure and dynamics of insoluble proteins at atomic resolution. The sensitivity of the employed multidimensional experiments can be systematically improved when both transversal components of the magnetization are transferred simultaneously after an evolution period. The method of preservation of equivalent pathways has been explored in solution-state NMR; however, it does not find widespread application due to relaxation issues connected with increased molecular size. We present here for the first time heteronuclear transverse mixing sequences for correlation experiments at moderate and fast MAS frequencies. Optimal control allows to boost the signal-to-noise ratio (SNR) beyond the expected factor of for each indirect dimension. In addition to the carbon-detected sensitivity-enhanced 2D NCA experiment, we present a novel proton-detected, doubly sensitivity-enhanced 3D hCANH pulse sequence for which we observe a 3-fold improvement in SNR compared to the conventional experimental implementation. The sensitivity gain turned out to be essential to unambiguously characterize a minor fibril polymorph of a human lambda-III immunoglobulin light chain protein that escaped detection so far.

27Al Solid-State Magic-Angle Spinning NMR Studies of Aluminum Powder Particle Surfaces Treated with a Methyltriethoxysilane Coupling Agent under Acidic Conditions

We report on the reaction between methyltriethoxysilane (MTES) and micrometer-sized aluminum particles, facilitated by HCl. This reaction ultimately produces silane-coated aluminum particles. Using 27Al magic-angle spinning solid-state nuclear magnetic resonance, we find that aluminum powder starts with a mixture of tetrahedrally, pentahedrally, and octahedrally coordinated aluminum, with the pentahedral species dominating. In the presence of HCl, however, the aluminum undergoes a restructuring, so that octahedrally coordinated aluminum is the dominant species. Using diffuse reflectance infrared spectroscopy to confirm the deposition of silane, we find that this restructuring of the aluminum in the presence of HCl is both a sufficient and necessary condition for the deposition of the silane.

Development and chromatographic exploration of stable-bonded cross-linked amino silica against classical amino phases.

The present work reports on a novel stable-bonded amino silica stationary phase obtained by crosslinking of surface aminopropyl moieties using triglycidyl isocyanurate. The obtained cross-linked amido-amino network silica material exhibited superior hydrolytic stability compared to classical 3-aminopropyl phases and showed, inter alia, excellent separation of nine therapeutically effective sulfonamides in hydrophilic interaction/weak anion exchange chromatography elution mode. Additionally, the separation of carbohydrates was investigated under classical hydrophilic interaction chromatography conditions as well proving the suitability of the novel phase for such applications. For the evaluation of the hydrolytic stability the prepared material, as well as two commercially available benchmark columns and a set of in-house synthesized amino-modified materials, were exposed to harsh aqueous mobile phase conditions for in total of 50h at elevated temperature. In this context, the materials were examined by elemental analysis, (13 C and 29 Si cross-polarization/magic angle spinning) solid-state nuclear magnetic resonance, and a chromatographic test before and subsequent to the exposure to these stress conditions. Lastly, the new stationary phase was classified in comparison to a set of commercially available stationary phases by principal component analysis of resultant retention factors gained from chromatographic standard tests.

Evolution of α-synuclein conformation ensemble toward amyloid fibril via liquid-liquid phase separation (LLPS) as investigated by dynamic nuclear polarization-enhanced solid-state MAS NMR

Protein fibrillation and human neurodegenerative diseases, with a profound underlying connection suggested between them, have been the subject of intense investigations in the medical, biophysical and bio-engineering sciences. For gaining the molecular mechanistic insights into such connection, i.e., the cause and effect, atomic-resolution molecular structure information especially on the initial oligomeric states is of paramount importance, not only that on the mature amyloid fibrils. α-Synuclein (αSyn) and its amyloid fibril has a direct relevance to the Parkinson's disease and other synucleinopathies, but what triggers the fibrillation is still not entirely clear. We here describe the liquid-liquid phase separation (LLPS) of αSyn and investigate its conformational evolution from its monomeric state into oligomer state within the early-stage of the phase-separated droplets, mainly using solution and magic-angle spinning (MAS) solid-state nuclear magnetic resonance (NMR) spectroscopies, aided with optical and fluorescent microscopies and CD spectroscopy. Based on the analysis of the intricately broadened shapes of the MAS NMR peaks observed for isotopically 13C-labeled His-50 of αSyn, we show that the distribution of the αSyn conformation is skewed from the initial completely random state to a loose β-rich ensembles at/around His-50 as early as day-3 (d3) within the droplet. This intra-droplet loose β-rich assembly showed a very slow progression until d8, and eventually maturated into ThT-positive, long and unbranched amyloid fibrils after 8 weeks. The obtained information on the evolution of the distribution of the conformation ensemble is unique, and difficult to obtain with X-ray crystallography and cryo-electron microscopy (cryoEM). In particular, the sensitivity-enhanced MAS NMR based on the low-temperature dynamic nuclear polarization (DNP) technique was proven to be a key tool in characterizing the conformational ensemble with dilute protein samples such as the liquid-phase droplets.

Influence of the Dynamically Disordered N-Terminal Tail Domain on the Amyloid Core Structure of Human Y145Stop Prion Protein Fibrils.

The Y145Stop mutant of human prion protein (huPrP23-144) is associated with a familial prionopathy and provides a convenient in vitro model for investigating amyloid strains and cross-seeding barriers. huPrP23-144 fibrils feature a compact and relatively rigid parallel in-register β-sheet amyloid core spanning ∼30 C-terminal amino acid residues (∼112–141) and a large ∼90-residue dynamically disordered N-terminal tail domain. Here, we systematically evaluate the influence of this dynamic domain on the structure adopted by the huPrP23-144 amyloid core region, by investigating using magic-angle spinning solid-state nuclear magnetic resonance (NMR) spectroscopy a series of fibril samples formed by huPrP23-144 variants corresponding to deletions of large segments of the N-terminal tail. We find that deletion of the bulk of the N-terminal tail, up to residue 98, yields amyloid fibrils with native-like huPrP23-144 core structure. Interestingly, deletion of additional flexible residues in the stretch 99–106 located outside of the amyloid core yields shorter heterogenous fibrils with fingerprint NMR spectra that are clearly distinct from those for full-length huPrP23-144, suggestive of the onset of perturbations to the native structure and degree of molecular ordering for the core residues. For the deletion variant missing residues 99–106 we show that native huPrP23-144 core structure can be “restored” by seeding the fibril growth with preformed full-length huPrP23-144 fibrils.

Emerging Contributions of Solid-State NMR Spectroscopy to Chromatin Structural Biology.

The eukaryotic genome is packaged into chromatin, a polymer of DNA and histone proteins that regulates gene expression and the spatial organization of nuclear content. The repetitive character of chromatin is diversified into rich layers of complexity that encompass DNA sequence, histone variants and post-translational modifications. Subtle molecular changes in these variables can often lead to global chromatin rearrangements that dictate entire gene programs with far reaching implications for development and disease. Decades of structural biology advances have revealed the complex relationship between chromatin structure, dynamics, interactions, and gene expression. Here, we focus on the emerging contributions of magic-angle spinning solid-state nuclear magnetic resonance spectroscopy (MAS NMR), a relative newcomer on the chromatin structural biology stage. Unique among structural biology techniques, MAS NMR is ideally suited to provide atomic level information regarding both the rigid and dynamic components of this complex and heterogenous biological polymer. In this review, we highlight the advantages MAS NMR can offer to chromatin structural biologists, discuss sample preparation strategies for structural analysis, summarize recent MAS NMR studies of chromatin structure and dynamics, and close by discussing how MAS NMR can be combined with state-of-the-art chemical biology tools to reconstitute and dissect complex chromatin environments.

Identification of a Novel Pyruvyltransferase Using 13C Solid-State Nuclear Magnetic Resonance To Analyze Rhizobial Exopolysaccharides.

The alphaproteobacterium Sinorhizobium meliloti secretes two acidic exopolysaccharides (EPSs), succinoglycan (EPSI) and galactoglucan (EPSII), which differentially enable it to adapt to a changing environment. Succinoglycan is essential for invasion of plant hosts and, thus, for the formation of nitrogen-fixing root nodules. Galactoglucan is critical for population-based behaviors such as swarming and biofilm formation and can facilitate invasion in the absence of succinoglycan on some host plants. The biosynthesis of galactoglucan is not as completely understood as that of succinoglycan. We devised a pipeline to identify putative pyruvyltransferase and acetyltransferase genes, construct genomic deletions in strains engineered to produce either succinoglycan or galactoglucan, and analyze EPS from mutant bacterial strains. EPS samples were examined by 13C cross-polarization magic-angle spinning (CPMAS) solid-state nuclear magnetic resonance (NMR). CPMAS NMR is uniquely suited to defining chemical composition in complex samples and enables the detection and quantification of distinct EPS functional groups. Galactoglucan was isolated from mutant strains with deletions in five candidate acyl/acetyltransferase genes (exoZ, exoH, SMb20810, SMb21188, and SMa1016) and a putative pyruvyltransferase (wgaE or SMb21322). Most samples were similar in composition to wild-type EPSII by CPMAS NMR analysis. However, galactoglucan produced from a strain lacking wgaE exhibited a significant reduction in pyruvylation. Pyruvylation was restored through the ectopic expression of plasmid-borne wgaE. Our work has thus identified WgaE as a galactoglucan pyruvyltransferase. This exemplifies how the systematic combination of genetic analyses and solid-state NMR detection is a rapid means to identify genes responsible for modification of rhizobial exopolysaccharides. IMPORTANCE Nitrogen-fixing bacteria are crucial for geochemical cycles and global nitrogen nutrition. Symbioses between legumes and rhizobial bacteria establish root nodules, where bacteria convert dinitrogen to ammonia for plant utilization. Secreted exopolysaccharides (EPSs) produced by Sinorhizobium meliloti (succinoglycan and galactoglucan) play important roles in soil and plant environments. The biosynthesis of galactoglucan is not as well characterized as that of succinoglycan. We employed solid-state nuclear magnetic resonance (NMR) to examine intact EPS from wild-type and mutant S. meliloti strains. NMR analysis of EPS isolated from a wgaE gene mutant revealed a novel pyruvyltransferase that modifies galactoglucan. Few EPS pyruvyltransferases have been characterized. Our work provides insight into the biosynthesis of an important S. meliloti EPS and expands the knowledge of enzymes that modify polysaccharides.

Two millimeter diameter spherical rotors spinning at 68 kHz for MAS NMR

Spherical rotors are a new paradigm in magic angle spinning (MAS) solid-state nuclear magnetic resonance (NMR). The simple geometry makes smaller diameter spheres and their utilization within narrow-bore NMR probes feasible. Here we report a 68 kHz spinning frequency of 2 mm diameter spheres using helium spinning gas outside the magnet and demonstrate the use of KMnO4 to adjust the magic angle at a spinning frequency of 59.3 kHz for MAS NMR. We observe third-order spinning sidebands in the 55Mn spectrum clearly showing the MAS frequency of 59.3 kHz, with KBr showing nearly no first-order spinning sidebands at a similar frequency. The spinning stability was ±0.5% during data acquisition without spinning regulation. To address concerns about the low NMR filling factor of MAS spheres, we employ a modified stator and a smaller coil and achieve three times higher NMR sensitivity then our previous coil geometries for MAS spheres. Advanced coil and rotor fabrication technologies are expected to further increase the spinning frequency and NMR sensitivity of MAS spheres.

Nitrene-functionalized ruthenium nanoparticles: Spectral evidence for the conjugated ruthenium-nitrene π bonds and the impact on the catalytic activity

In this manuscript, ruthenium (Ru) nanoparticles functionalized with nitrene ligands through the ruthenium-nitrene (RuN) π bonds are explored. By synthesizing the nitrene ligands with and without 15N-labelling, RuN π bonds on Ru nanoparticles are evidenced by experimental and theoretically calculated FTIR spectra. The coordination of nitrene ligands on Ru nanoparticles surface, the interfacial charge delocalization and the impact of nitrene ligands on the catalytic performance of Ru nanoparticles are further characterized by magic-angle spinning solid-state carbon nuclear magnetic resonance spectroscopy (13C NMR) of 13CO-adsorbed Ru nanoparticles, photoluminescence and the hydrogenation of styrene.

Grafting Poly(Methyl Methacrylate) (PMMA) from Cork via Atom Transfer Radical Polymerization (ATRP) towards Higher Quality of Three-Dimensional (3D) Printed PMMA/Cork-g-PMMA Materials.

Cork is a unique material and its by-products are attracting an ever-growing interest for preparing new materials in an attempt to extend the outstanding properties of cork toward innovative and high value applications. Yet, the miscibility of cork particles with thermoplastic matrices is not easy due to its low density and surface properties. Here, cork is functionalized with poly(methyl methacrylate) (PMMA) via atom transfer radical polymerization (ATRP) to yield cork grafted with PMMA chains particles (cork-g-PMMA). Both the ATRP macroinitiator and the cork-g-PMMA obtained are fully characterized by Fourier-transform infrared spectroscopy (FT-IR), 13C cross-polarized magic-angle spinning solid-state nuclear magnetic resonance (13C CP/MAS solid state NMR), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), X-ray diffraction (XRD) and thermogravimetric analyses (TGA). The functionalized cork particles are then blended with commercial PMMA to afford cork-g-PMMA/PMMA. To compare, cork also is mixed with PMMA and the ensuing cork/PMMA sample and its morphology, thermal, and mechanical properties are compared with those of cork-g-PMMA/PMMA and commercial PMMA. The cork surface modification via ATRP of the methyl methacrylate (MMA) yields better dispersion in the matrix. Consequently, a blend with enhanced mechanical performance, higher thermal stability, and a higher melt flow index (MFI) is obtained when compared to the blend prepared using unmodified particles. The similarity of the MFI of cork-g-PMMA/PMMA to that of PMMA suggests good printability. Indeed, a three-dimensional (3D) printed specimen is obtained confirming that grafting using ATRP is a promising route for the preparation of high quality 3D printed products.