Spherical Microgels Research Articles

Optimization of pH-responsive microgel for the co-delivery of Weizmannia coagulans and procyanidins to enhance survival rate and tolerance

The purpose of this study was to prepare a pH-responsive microgel for co-delivering Weizmannia coagulans 99 (BC99) and procyanidins (PCs) to enhance the survival rate and tolerance of probiotics in complex micro-environment. The effects of different concentrations of PCs on the properties of microgels were optimized, and found that the spherical microgels had higher encapsulation efficiency (90.27 ± 2.51%) and smaller size when the concentration of PCs was 20 μg/mL. The interaction among PCs, pectin and protein could effectively improve the survival rate of BC99 under different pH, bile salt, digestive enzyme and temperature conditions, maintain their stability in acidic gastric fluid, and realize the release of probiotics in neutral intestinal fluid. Moreover, the microgel was able to protect BC99 against H2O2 and antibiotics. This work provides a pH-responsive co-loaded microgels for BC99 and PCs, and has the potential in the loading and delivery of other probiotics and polyphenols.

Development of injectable microgel-based scaffolds via enzymatic cross-linking of hyaluronic acid-tyramine/gelatin-tyramine for potential bone tissue engineering

Currently, the healing of large bone defects relies on invasive surgeries and the transplantation of autologous bone. As a less invasive treatment option, the provision of microenvironments that promote the regeneration of defective bones holds great promise. Here, we developed hyaluronic acid (HA)/gelatin (Ge) microgel-based scaffolds to guide bone regeneration. To enable the formation of microgels by enzymatic cross-linking in the presence of horseradish peroxidase (HRP) and hydrogen peroxide (H2O2), we modified the polymers with tyramine (TA). Spectrophotometry and proton nuclear magnetic resonance (1H NMR) spectroscopy analysis confirmed successful tyramine substitution on polymer backbones. To enable the formation of microgels by a water-in-oil emulsion approach, the HRP and H2O2 concentrations were tuned to achieve the gelation in a few seconds. By varying the stirring speed from 600 to 1000 rpm, spherical microgels were produced with an average size of 116 ± 8.7 and 68 ± 4.7 μm, respectively. The results showed that microgels were injectable through needles and showed good biocompatibility with the cultured human osteosarcoma cell line (MG-63). HA/Ge-TA microgels served as a promising substrate for MG-63 cells since they improved the alkaline phosphatase activity and level of calcium deposition. In summary, the developed HA/Ge-TA microgels are promising injectable microgel-based scaffolds in bone tissue engineering.

Substrate Curvature Influences Cytoskeletal Rearrangement and Modulates Macrophage Phenotype.

Inflammation serves as a critical defense mechanism against pathogens and tissue damage but can lead to chronic diseases, such as cardiovascular disease and diabetes, when dysregulated. Macrophages play a pivotal role in orchestrating inflammatory responses, transitioning from pro-inflammatory M1 to anti-inflammatory M2 phenotypes to resolve inflammation and promote tissue repair. Current approaches to modulate macrophage phenotype predominantly rely on biochemical cues, which may induce systemic side effects. Given the mechanosensitivity of macrophages, this study investigates biophysical cues, specifically substrate curvature, as a localized strategy to regulate macrophage phenotype and minimize systemic repercussions. We hypothesized that substrate curvature influences macrophage immunophenotype by modulating F-actin polymerization. To test this hypothesis, we fabricated spherical microgels with tunable curvatures and characterized their biophysical properties. Our findings indicate that macrophages adhere to microgel surfaces irrespective of curvature, but the curvature significantly alters F-actin dynamics. Furthermore, manipulating cytoskeletal dynamics via selective actin inhibition partially reversed curvature-induced changes in macrophage phenotype. These results underscore the pivotal role of substrate curvature in modulating macrophage behavior and immunophenotype. Overall, our study demonstrates that substrate curvature significantly influences macrophage cytoskeletal dynamics and resulting immunophenotype. This simple approach can be utilized as a localized immunomodulatory treatment for inflammatory diseases.

ROS-responsive drug-releasing injectable microgels for ameliorating myocardial infarction

Despite of the recent advances in regulatory T cell (Treg) therapy, a limited number of available cells and specificity at the desired tissue site have severely compromised their efficacy. Herein, an injectable drug-releasing (MTK-TK-drug) microgel system in response to in situ stimulation by reactive oxygen species (ROS) was constructed with a coaxial capillary microfluidic system and UV curing. The spherical microgels with a size of 150 μm were obtained. The MTK-TK-drug microgels efficiently converted the pro-inflammatory Th17 cells into anti-inflammatory regulatory T cells (Treg) cells in vitro, and the ROS-scavenging materials synergistically enhanced the effect by modulating the inflammation microenvironment. Thus, the microgels significantly reduced cardiomyocyte apoptosis and decreased the inflammatory response in the early stages of post-myocardial infarction (MI) in vivo, thereby reducing fibrosis, promoting vascularization, and preserving cardiac function. Overall, our results indicate that the MTK-TK-drug microgels can attenuate the inflammatory response and improve MI therapeutic effects in vivo.

Effects of microgels fabricated by microfluidic on the stability, antioxidant, and immunoenhancing activities of aquatic protein

Aquatic products are considered a potential source of novel bioactive proteins, which are used as therapeutic drugs for the treatment of different diseases (such as oxidative stress, immunocompromised, and inflammation), as well as nutraceuticals and cosmetics. However, the physical and chemical properties of proteins are unstable, and they are easily denatured by the influence of external high temperature and polar pH during processing, resulting in the loss of their functional activity. Herein, Fenneropenaeus chinensis water-soluble protein (FCWP) and Lateolabrax japonicus water-soluble protein (LJWP) were encapsulated within spherical biopolymer microgels composed of pectin and chitosan produced by the microfluidic device. The encapsulated samples remained inside the microgels when they were exposed to upper gastrointestinal but were released when they were exposed to simulated colonic fluid due to the hydrolysis effect by enzymes secreted by the colonic microflora. The results showed that microgels improve the thermal stability of FCWP and LJWP due to the interaction between polysaccharides and proteins in the microgels. In addition, microgels encapsulation did not affect the antioxidant and immunoenhancing activities of FCWP and LJWP. In summary, these microgels are suitable for oral colon-specific delivery in functional foods and supplements.

Encapsulation of multiple enzymes within a microgel via water-in-water emulsions for enzymatic cascade reactions.

Enzyme-loaded spherical microgels with diameters of several micrometers have been explored for use in therapeutic microreactors and biosensors. Conventional preparation strategies for enzyme-loaded microgels utilized water-in-oil emulsions or flow chemistry techniques. The former damage enzyme activity using organic solvents and the latter are expensive and difficult to expand because of the complex system. In this study, we present a simple strategy for creating multiple enzyme-loaded gelatin-based microgels with tunable diameters in a single flask. This strategy was based on our finding that enzymes spontaneously partitioned in a dispersed methacryloyl gelatin aqueous solution in a poly(vinylpyrrolidone) (WGelMA/WPVP) aqueous solution. The method achieved an encapsulation efficiency of over 70% even with four types of enzymes and retained their activity owing to the full aqueous system. Additionally, the encapsulated β-galactosidase activity was maintained for 24 hours at pH 6, although naked β-galactosidase lost approximately 60% of its activity, which was superior to that of previous enzyme-loaded gelatin gels. Moreover, this simple method enabled the production of 10 g-scale or more microgels in one batch. We also demonstrated that multiple enzyme-loaded gelatin microgels functioned as cascade microreactors for lactose and glucose sensing. This versatile strategy enables the production of enzyme-loaded microgels while maintaining the enzyme activity using very low technologies. This result contributes to the easy preparation of enzyme-loaded microgels and their applications in the biomedical and green catalytic fields.

Encapsulation of Lactobacillus rhamnosus GG in chymosin treated milk protein-alginate microgel

Encapsulation of probiotic bacteria helps to protect its viability in food and enhances bioavailability in the human body. Alginate, a widely used gellant, singly cannot offer adequate protection to the encapsulated probiotics because the porosity of its micro-particles limits its stability in acidic conditions. Milk protein concentrate (MPC) is known to enhance gel strength. This study attempts to use chymosin treated MPC (1.0% solids w/w) as a co-gelling agent with sodium alginate (1.0%, 1.5% and 2.0% solids w/w) to enhance encapsulation of Lactobacillus rhamnosus GG (LGG) by adopting a continuous impinging aerosol technique using CaCl2. The moisture content of microgel paste of test formulations ranged from 88.1% to 90.4% (w/w) (P>0.05). Amongst the alginate MPC composite formulations, microparticles comprising of 1.0% alginate and 1.0% MPC solids exhibited highest (P<0.05) probiotic count (7.27 log CFU/g solids) and lowest viability reduction (P<0.05). Confocal image of its microparticle illustrate the presence of live bacteria, which appear as green, rod-shaped entities, entrapped within dark gel matrix. Under simulated gastric condition of pH 2 at 37oC, its microgel particle exhibited detectable viability upto 15 minutes. In case of 1.0% alginate control microgel, comparatively higher viability was noted in the 5th minute, which was undetectable by the 10th minute. With a progressive increase in alginate concentration among test formulations, cell count decreased, suggesting milk protein positively impacted viability. Microgel of 1.0% MPC control exhibited lowest loss of viable cells (0.93 log CFU/g solids). Optical image of its microparticles appeared as large flocculate rather than spherical microgel, as observed with alginate control microparticles, suggesting MPC alone is unable to produce microgels. While this study infers better viability of microparticles comprising of 1.0 % alginate and 1.0 % MPC, it opens avenues for further research for strengthening co-gelation for probiotic survival in low pH.

Cellular Architects at Work: Cells Building their Own Microgel Houses.

Microporous annealed particle (MAP) scaffolds are investigated for their application as injectable 3D constructs in the field of regenerative medicine and tissue repair. While available MAP scaffolds provide a stable interlinked matrix of microgels for cell culture, the infiltration depth and space for cells to grow inside the scaffolds is pre-determined by the void fraction during the assembly. In the case of MAP scaffolds fabricated from interlinked spherical microgels, a cellularity gradient can be observed with the highest cell density on the scaffold surface. Additionally, the interlinked microgel network limits the ability of cells to remodel their environment, which contradicts native tissue dynamics. In this work, a cell-induced interlinking method for MAP scaffold formation is established, which avoids the necessity of chemical crosslinkers and pre-engineered pores to achieve micro- or macropores in these 3D frameworks. This method enables cells to self-organize with microgels into dynamic tissue constructs, which can be further controlled by altering the microgel properties, the cell/microgel ratio, and well shape. To form a cell-induced interlinked scaffold, the cells are mixed with dextran-based microgels and function as a glue between the microgels, resulting in a more homogenous cell distribution throughout the scaffold with efficient cell-cell interactions.

Osmotic swelling behavior of surface-charged ionic microgels.

In recent years, ionic microgels have garnered much attention due to their unique properties, especially their stimulus-sensitive swelling behavior. The tunable response of these soft, permeable, compressible, charged colloidal particles is increasingly attractive for applications in medicine and biotechnologies, such as controlled drug delivery, tissue engineering, and biosensing. The ability to model and predict variation of the osmotic pressure of a single microgel with respect to changes in particle properties and environmental conditions proves vital to such applications. In this work, we apply both nonlinear Poisson-Boltzmann theory and molecular dynamics simulation to ionic microgels (macroions) in the cell model to compute density profiles of microions (counterions, coions), single-microgel osmotic pressure, and equilibrium swelling ratios of spherical microgels whose fixed charge is confined to the macroion surface. The basis of our approach is an exact theorem that relates the electrostatic component of the osmotic pressure to the microion density profiles. Close agreement between theory and simulation serves as a consistency check to validate our approach. We predict that surface-charged microgels progressively deswell with increasing microgel concentration, starting well below close packing, and with increasing salt concentration, in qualitative agreement with experiments. Comparison with previous results for microgels with fixed charge uniformly distributed over their volume demonstrates that surface-charged microgels deswell more rapidly than volume-charged microgels. We conclude that swelling behavior of ionic microgels in solution is sensitive to the distribution of fixed charge within the polymer-network gel and strongly depends on bulk concentrations of both microgels and salt ions.

Exploring the Role of Spatial Confinement in Immune Cell Recruitment and Regeneration of Skin Wounds.

Microporous annealed particle (MAP) scaffolds are injectable granular materials comprised of micron sized hydrogel particles (microgels). The diameter of these microgels directly determines the size of the interconnected void space between particles where infiltrating or encapsulated cells reside. This tunable porosity allows the authors to use MAP scaffolds to study the impact of spatial confinement (SC) on both cellular behaviors and the host response to biomaterials. Despite previous studies showing that pore size and SC influence cellular phenotypes, including mitigating macrophage inflammatory response, there is still a gap in knowledge regarding how SC within a biomaterial modulates immune cell recruitment in vivo in wounds and implants. Thus, the immune cell profile within confined and unconfined biomaterials is studied using small (40µm), medium (70µm), and large (130µm) diameter spherical microgels, respectively. This work uncovered that MAP scaffolds impart regenerative wound healing with an IgG1-biased Th2 response. MAP scaffolds made with large microgels promote a balanced pro-regenerative macrophage response, resulting in enhanced wound healing with mature collagen regeneration and reduced inflammation levels.

Fabrication of protein microgels with spherical and urchin-like shapes within water-in-water (W/W) emulsions

Microgels are three-dimensional networks comprising crosslinked polymers. Biopolymer-based microgels, especially protein-based microgels, are finding increasing applications in various fields, for example as densely packed particles in sports beverages, as stabilizers in emulsions, and as delivery vehicles. Microgels are usually spherical and are typically produced using either solid or liquid templating methods. A popular liquid templating technique includes internal phase gelation within water-in-oil emulsions; however, it commonly requires the employment of synthetic surfactants and organic solvents. In the context of microgels, branched (urchin-like) microgels have attracted considerable attention due to their much higher surface-to-volume ratio rather than spherical microgels. Here, we report a method for fabricating urchin-like, and spherical microgels using egg yolk high-density lipoproteins (HDL) within all-aqueous (water-in-water, W/W) emulsions. HDL is compartmentalized in the droplet phase within W/W emulsions, composed of Na2SO4 and polyethylene glycol (PEG) solutions. HDL is crosslinked and then oxidized using gold ions, while gold ions get reduced to gold nanoparticles (AuNPs), resulting in the formation of hybrid HDL-Au microgels. The microgels with different shapes (random aggregates, urchin-like, and spherical microgels) are formed by changing HDL concentration and pH values in the emulsions. Epi-fluorescent microscopy and confocal laser scanning microscopy were used to characterize the structures of the HDL-Au microgels. The outcomes of this research may aid the development of microgels for applications in different fields, such as encapsulation, catalysis, optical switches, sensors, biomaterials for tissue engineering and in food applications.

Degradation Kinetics of Disulfide Cross-Linked Microgels: Real-Time Monitoring by Confocal Microscopy.

Although biodegradable microgels represent a useful drug delivery system, questions remain regarding the kinetics of gel degradation and subsequent drug release. Spherical microgels (~Ø10-300 µm) were synthesized using an inverse suspension polymerization method. Specifically, acrylamide and acrylonitrile monomers were thermally co-polymerized with N,N'-bis(acryloyl)cystamine as a cross-linker with disulfide bridges. The kinetics and mechanism of degradation of these cross-linked, degradable, fluorescently labeled microgels (PAAm-AN-BAC-FA) were quantitatively studied under confocal microscopy at various concentrations of glutathione (reducing agent) ranging from 0.06 to 91.8 mM. It was found that polymer network degradation via the cleavage of disulfide bonds was accompanied by two overlapping processes: diffusion-driven swelling and dissolution-driven erosion. A slow increase in microgel size (swelling) resulted from partial de-cross-linking in the bulk of the microgel, whereas a faster decrease in fluorescence intensity (erosion) resulted from the complete cleavage of disulfide bonds and the release of uncleaved polymeric chains from the microgel immediate surface into the solution. Swelling and erosion exhibited distinct kinetics and characteristic times. Importantly, the dependence of kinetics on glutathione concentration for both swelling and erosion suggests that degradation would occur faster in cancer cells (higher concentration of reductants) than in normal cells (lower concentration of reductants), such that drug release profiles would be correspondingly different. A greater comprehension of microgel degradation kinetics would help in (i) predicting the drug release profiles for novel multifunctional drug delivery systems and (ii) using redox-sensitive degradable hydrogel particles to determine the concentrations of reducing agents either in vitro or in vivo.

Carboxymethyl Chitosan Microgels for Sustained Delivery of Vancomycin and Long-Lasting Antibacterial Effects.

Carboxymethyl chitosan (CMCh) is a unique polysaccharide with functional groups that can develop positive and negative charges due to the abundant numbers of amine and carboxylic acid groups. CMCh is widely used in different areas due to its excellent biocompatibility, biodegradability, water solubility, and chelating ability. CMCh microgels were synthesized in a microemulsion environment using divinyl sulfone (DVS) as a crosslinking agent. CMCh microgel with tailored size and zeta potential values were obtained in a single stem by crosslinking CMCh in a water-in-oil environment. The spherical microgel structure is confirmed by SEM analysis. The sizes of CMCh microgels varied from one micrometer to tens of micrometers. The isoelectric point of CMCh microgels was determined as pH 4.4. Biocompatibility of CMCh microgels was verified on L929 fibroblasts with 96.5 ± 1.5% cell viability at 1 mg/mL concentration. The drug-carrying abilities of CMCh microgels were evaluated by loading Vancomycin (Van) antibiotic as a model drug. Furthermore, the antibacterial activity efficiency of Van-loaded CMCh microgels (Van@CMCh) was investigated. The MIC values of the released drug from Van@CMCh microgels were found to be 68.6 and 7.95 µg/mL against E. coli and S. aureus, respectively, at 24 h contact time. Disk diffusion tests confirmed that Van@CMCh microgels, especially for Gram-positive (S. aureus) bacteria, revealed long-lasting inhibitory effects on bacteria growth up to 72 h.

Advances in the Development of Granular Microporous Injectable Hydrogels with Non-spherical Microgels and Their Applications in Tissue Regeneration.

Granular microporous hydrogels are emerging as effective biomaterial scaffolds for tissue engineering due to their improved characteristics compared to traditional nanoporous hydrogels, which better promote cell viability, cell migration, cellular/tissue infiltration, and tissue regeneration. Recent advances have resulted in the development of granular hydrogels made of non-spherical microgels, which compared to those made of spherical microgels have higher macroporosity, more stable mechanical properties, and better ability to guide the alignment and differentiation of cells in anisotropic tissue. The development of these hydrogels as an emerging research area is attracting increasing interest in regenerative medicine. This review first summarizes the fabrication techniques available for non-spherical microgels with different aspect-ratios. Then, it introduces the development of granular microporous hydrogels made of non-spherical microgels, their physicochemical characteristics, and their applications in tissue regeneration. The limitations and future outlook of research on microporous granular hydrogels are also critically discussed.

Wrapping anisotropic microgel particles in lipid membranes: Effects of particle shape and membrane rigidity

Cellular engulfment and uptake of macromolecular assemblies or nanoparticles via endocytosis can be associated to both healthy and disease-related biological processes as well as delivery of drug nanoparticles and potential nanotoxicity of pollutants. Depending on the physical and chemical properties of the system, the adsorbed particles may remain at the membrane surface, become wrapped by the membrane, or translocate across the membrane through an endocytosis-like process. In this paper, we address the question of how the wrapping of colloidal particles by lipid membranes can be controlled by the shape of the particles, the particle-membrane adhesion energy, the membrane phase behavior, and the membrane-bending rigidity. We use a model system composed of soft core-shell microgel particles with spherical and ellipsoidal shapes, together with phospholipid membranes with varying composition. Confocal microscopy data clearly demonstrate how tuning of these basic properties of particles and membranes can be used to direct wrapping and membrane deformation and the organization of the particles at the membrane. The deep-wrapped states are more favorable for ellipsoidal than for spherical microgel particles of similar volume. Theoretical calculations for fixed adhesion strength predict the opposite behavior-wrapping becomes more difficult with increasing aspect ratio. The comparison with the experiments implies that the microgel adhesion strength must increase with increasing particle stretching. Considering the versatility offered by microgels systems to be synthesized with different shapes, functionalizations, and mechanical properties, the present findings further inspire future studies involving nanoparticle-membrane interactions relevant for the design of novel biomaterials and therapeutic applications.

Colloidal Polymer-Templated Formation of Inorganic Nanocrystals and their Emerging Applications.

Inorganic nanocrystals possess unique physicochemical properties compared to their bulk counterparts. Stabilizing agents are commonly used for the preparation of inorganic nanocrystals with controllable properties. Particularly, colloidal polymers have emerged as general and robust templates for in situ formation and confinement of inorganic nanocrystals. In addition to templating and stabilizing inorganic nanocrystals, colloidal polymers can tailor their physicochemical properties such as size, shape, structure, composition, surface chemistry, and so on. By incorporating functional groups into colloidal polymers, desired functions can be integrated with inorganic nanocrystals, advancing their potential applications. Here, recent advances in the colloidal polymer-templated formation of inorganic nanocrystals are reviewed. Seven types of colloidal polymers, including dendrimer, polymer micelle, stare-like block polymer, bottlebrush polymer, spherical polyelectrolyte brush, microgel, and single-chain nanoparticle, have been extensively applied for the synthesis of inorganic nanocrystals. Different strategies for the development of these colloidal polymer-templated inorganic nanocrystals are summarized. Then, their emerging applications in the fields of catalysis, biomedicine, solar cells, sensing, light-emitting diodes, and lithium-ion batteries are highlighted. Last, the remaining issues and future directions are discussed. This review will stimulate the development and application of colloidal polymer-templated inorganic nanocrystals.

Anisotropic, Hydrogel Microparticles as pH-Responsive Drug Carriers for Oral Administration of 5-FU.

In the last 20 years, the development of stimuli-responsive drug delivery systems (DDS) has received great attention. Hydrogel microparticles represent one of the candidates with the most potential. However, if the role of the cross-linking method, polymer composition, and concentration on their performance as DDS has been well-studied, still, a lot needs to be explained regarding the effect caused by the morphology. To investigate this, herein, we report the fabrication of PEGDA-ALMA-based microgels with spherical and asymmetric shapes for 5-fluorouracil (5-FU) on-demand loading and in vitro pH-triggered release. Due to anisotropic properties, the asymmetric particles showed an increased drug adsorption and higher pH responsiveness, which in turn led to a higher desorption efficacy at the target pH environment, making them an ideal candidate for oral administration of 5-FU in colorectal cancer. The cytotoxicity of empty spherical microgels was higher than the cytotoxicity of empty asymmetric microgels, suggesting that the gel network's mechanical proprieties of anisotropic particles were a better three-dimensional environment for the vital functions of cells. Upon treatment with drug-loaded microgels, the HeLa cells' viability was lower after incubation with asymmetric particles, confirming a minor release of 5-FU from spherical particles.

Preparation and Properties of Bimetallic Chitosan Spherical Microgels.

The aim of this work was to prepare bimetallic chitosan microgels with high sphericity and investigate the influences of metal-ion type and content on the size, morphology, swelling, degradation and biological properties of microgels. Amino and hydroxyl groups of chitosan (deacetylation degree, DD, of 83.2% and 96.9%) served as ligands in the Cu2+-Zn2+/chitosan complexes with various contents of cupric and zinc ions. The electrohydrodynamic atomization process was used to produce highly spherical microgels with a narrow size distribution and with surface morphology changing from wrinkled to smooth by increasing Cu2+ ions' quantity in bimetallic systems for both used chitosans. The size of the bimetallic chitosan particles was estimated to be between 60 and 110 µm for both used chitosans, and FTIR spectroscopy indicated the formation of complexes through physical interactions between the chitosans' functional groups and metal ions. The swelling capacity of bimetallic chitosan particles decreases as the DD and copper (II) ion content increase as a result of stronger complexation with respect to zinc (II) ions. Bimetallic chitosan microgels showed good stability during four weeks of enzymatic degradation, and bimetallic systems with smaller amounts of Cu2+ ions showed good cytocompatibility for both used chitosans.

3D microgel with extensively adjustable stiffness and homogeneous microstructure for metastasis analysis of solid tumor

3D microgels with various mechanical properties have been important platforms tumor metastasis analysis, and widely adjustable stiffness is crucial for deeper researches. Herein, by mixing biodegradable polylactic acid (PLA) nanofibers in the modified alginate with different concentrations of Ca2+, we significantly enhance the stiffness range of microgels while retaining the pore size, which provides bionic microenvironment for tumor analysis. As a proof of concept, we simulated the mechanical characteristics of breast tumors by encapsulating cells in 3D microgels with diverse stiffness, and analyzed cellular behaviors of two typical breast cancer cell lines: MCF-7 and SUM-159. Results showed that with the addition of 2.0% (w/v) PLA short nanofibers, the Young's modulus of modified alginate increased more than three-fold. Besides preserving high survival and proliferation rates, both cells also displayed stronger migration ability in soft microgel spheres, where RT-qPCR analysis revealed the underlying changes at the genetic level. This systematic study demonstrated our method is powerful for creating widely adjustable 3D mechanical microenvironment, and the results of cellular behavior analysis shows its promising application prospects in tumorigenesis and progression.

Microfluidic tapered aspirators for mechanical characterization of microgel beads.

In this study, we report a microfluidic approach for the measurement of mechanical properties of spherical microgel beads. This technique is analogous to tapered micropipette aspiration, while harnessing the benefits of microfluidics. We fabricate alginate-based microbeads and determine their mechanical properties using the microfluidic tapered aspirators. Individual microgel beads are aspirated and trapped in tapered channels, the deformed equilibrium shape is measured, and a stress balance is used to determine the Young's modulus. We investigate the effect of surface coating, taper angle, and bead diameter and find that the measured modulus is largely insensitive to these parameters. We show that the bead modulus increases with alginate concentration and follows a trend similar to that of the modulus measured using standard uniaxial compression. The critical pressure to squeeze out the beads from the tapered aspirators was found to depend on both the modulus and the bead diameter. Finally, we demonstrate how temporal changes in bead moduli due to enzymatic degradation of the hydrogel could be quantitatively determined. The results from this study highlight that the microfluidic tapered aspirators are a useful tool to measure hydrogel bead mechanics and have the potential to characterize dynamic changes in mechanical properties.