Specific enoyl-CoA Hydratase Research Articles

Characterization of an (R)-specific enoyl-CoA hydratase from Streptomyces sp. strain CFMR 7: A metabolic tool for enhancing the production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)

Poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate] [P(3HB-co-3HHx)] has a high potential to serve as a commercial bioplastic due to its biodegradability, thermoplastic and mechanical properties. The properties of this copolymer are greatly affected by the composition of 3HHx monomer. One of the most efficient ways to modulate the composition of 3HHx monomer in P(3HB-co-3HHx) is by manipulating the (R)-3HHx-CoA monomer supply. In this study, a new (R)-specific enoyl-CoA hydratase originating from a non-PHA producer, Streptomyces sp. strain CFMR 7 (PhaJSs), was characterized and found to be effective in supplying 3HHx monomer during invivo production of P(3HB-co-3HHx) copolymer. The P(3HB-co-3HHx) copolymer produced from the Cupriavidus necator transformant that harbors phaJSs, PHB-4/pBBR1-CBP-M-CPF4JSs, showed enhanced 3HHx incorporation of up to 11mol% without affecting the P(3HB-co-3HHx) production when palm oil was used as the carbon source. In addition, both kcat and kcat/Km of PhaJSs were higher toward the C6 than the shorter C4 substrates, underscoring the preference for 3-hydroxyhexanoyl-CoA. These results suggest that PhaJSs has a significant ability to supply 3HHx monomers for PHA biosynthesis via β-oxidation and can be applied for metabolic engineering of robust PHA-producing strains.

Functional annotation of an ecologically important protein from Chloroflexus aurantiacus involved in polyhydroxyalkanoates (PHA) biosynthetic pathway

Chloroflexus aurantiacus J-10-fI strain is a thermophilic gram-negative bacterium that possesses many proteins in its genome; some are considered as hypothetical proteins. The use of bioinformatics tools can assist in understanding this organism through structural and functional annotation. Our study aimed to assign structure and function to an ecologically important hypothetical protein present in the bacterial genome. To analyze the hypothetical protein (WP_012259469.1), we used an in silico approach to find out various properties like physiochemical characteristics, subcellular localization, 3D structure, protein–protein interaction and functional annotation. Protein–protein interactions were obtained from the STRING database. In silico analysis revealed that the protein is a soluble protein with predominantly alpha-helices in its secondary structure. The 3D model of the protein has been found to be novel and possessed expected quality as assessed by several quality assessment tools. Functional annotation indicated that the protein acted like a (R)-specific enoyl-CoA hydratase which is linked with PHA synthesis. Protein–protein interactions also showed with high confidence that the protein interacted with a protein synthesizer of enoyl-CoA hydratase involved in PHA biosynthesis. Polyhydroxyalkanoate (PHA) is a novel polyester used as a biodegradable thermoplastic and plays a crucial role in environmental biodegradability and biocompatibility. An extensive variety of microorganisms produces PHA for intracellular carbon and energy storage purposes. In the present investigation, we bioinformatically confirmed that the WP_012259469.1 is associated with the PHA biosynthesis pathway. From our anaylses, we also predict that polyhydroxyalkanoate (PHAs) has the potential to become an alternative source of renewable and biodegradable polyesters.

Biosynthesis of polyhydroxyalkanoates from vegetable oil under the co-expression of fadE and phaJ genes in Cupriavidus necator

The acyl-CoA dehydrogenase (FadE) and (R)-specific enoyl-CoA hydratase (PhaJ) are functionally related to the degradation of fatty acids and the synthesis of polyhydroxyalkanoates (PHAs). To verify this, a recombinant Cupriavidus necator H16 harboring the plasmid -pMPJAS03- with fadE from Escherichia coli strain K12 and phaJ1 from Pseudomonas putida strain KT2440 under the arabinose promoter (araC-PBAD) was constructed. The impact of co-expressing fadE and phaJ genes on C. necator H16/pMPJAS03 maintaining the wild-type synthase on short-chain-length/medium-chain-length PHA formation from canola or avocado oil at different arabinose concentrations was investigated. The functional activity of fadEE.c led to obtaining higher biomass and PHA concentrations compared to the cultures without expressing the gene. While high transcriptional levels of phaJ1P.p, at 0.1% of arabinose, aid the wild-type synthase to polymerize larger-side chain monomers, such as 3-Hydroxyoctanoate (3HO) and 3-Hydroxydecanoate (3HD). The presence of even small amounts of 3HO and 3HD in the co-polymers significantly depresses the melting temperature of the polymers, compared to those composed of pure 3-hydroxybutyrate (3HB). Our data presents supporting evidence that the synthesis of larger-side chain monomers by the recombinant strain relies not only upon the affinity of the wild-type synthase but also on the functionality of the intermediate supplying enzymes.

Two NADH-dependent (S)-3-hydroxyacyl-CoA dehydrogenases from polyhydroxyalkanoate-producing Ralstonia eutropha

Ralstonia eutropha H16 contains both NADH- and NADPH-dependent reduction activities to acetoacetyl-CoA, and the NADPH-dependent activity is mediated by PhaB paralogs with (R)-stereospecificity providing (R)-3-hydroxybutyryl (3HB)-CoA monomer for poly((R)-3-hydroxybutyrate) synthesis. In contrast, the gene encoding the NADH-dependent enzyme has not been identified to date. This study focused on the NADH-dependent dehydrogenase with (S)-stereospecificity in R.eutropha, as the (S)-specific reduction of acetoacetyl-CoA potentially competed with the polyester biosynthesis via (R)-3HB-CoA. The NADH-dependent reduction activity decreased to one-half when the gene for H16_A0282 (PaaH1), one of two homologs of clostridial NADH-3HB-CoA dehydrogenase, was deleted. The enzyme responsible for the remaining activity was partially purified and identified as H16_A0602 (Had) belonging to a different family from PaaH1. Gene disruption analysis elucidated that most of the NADH-dependent activity was mediated by PaaH1 and Had. The kinetic analysis using the recombinant enzymes indicated that PaaH1 and Had were both NADH-dependent 3-hydroxyacyl-CoA dehydrogenases with rather broad substrate specificity to 3-oxoacyl-CoAs of C4 to C8. The deletion of had in the R.eutropha strain previously engineered for biosynthesis of poly((R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate) led to decrease in the C6 composition of the copolyester synthesized from soybean oil, suggesting the role of Had in (S)-specific reduction of 3-oxohexanoyl-CoA with reverse β-oxidation direction. Crotonase ((S)-specific enoyl-CoA hydratase) in R.eutropha H16 was also partially purified and identified as H16_A3307.

Butyrate production under aerobic growth conditions by engineered Escherichia coli

Butyrate is an important industrial platform chemical. Although several groups have reported butyrate production under oxygen-limited conditions by a native producer, Clostridium tyrobutylicum, and by a metabolically engineered Escherichia coli, efforts to produce butyrate under aerobic growth conditions have met limited success. Here, we constructed a novel butyrate synthetic pathway that functions under aerobic growth conditions in E.coli, by modifying the 1-butanol synthetic pathway reported previously. The pathway consists of phaA (acetyltransferase) and phaB (NADPH-dependent acetoacetyl-CoA reductase) from Ralstonia eutropha, phaJ ((R)-specific enoyl-CoA hydratase) from Aeromonas caviae, ter (trans-enoyl-CoA reductase) from Treponema denticola, and endogenous thioesterase(s) of E.coli. To evaluate the potential of this pathway for butyrate production, culture conditions, including pH, oxygen supply, and concentration of inorganic nitrogen sources, were optimized in a mini-jar fermentor. Under the optimal conditions, butyrate was produced at a concentration of up to 140mM (12.3g/L in terms of butyric acid) after 54h of fed-batch culture.

Compositional regulation of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) by replacement of granule-associated protein in Ralstonia eutropha.

BackgroundPhasin (PhaP), a kind of polyhydroxyalkanoate (PHA) granule-associated proteins, has a role in controlling the properties of PHA granules surface, and is thought to have influence on PHA biosynthesis in PHA-producing bacteria. This study focused on the phaP1Re locus in Ralstonia eutropha as a site of chromosomal modification for production of flexible poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HHx)] from soybean oil.ResultsConsidering the high expression level of phaP1Re, phaJAc [encoding (R)-specific enoyl-CoA hydratase from Aeromonas caviae] was inserted into the downstream of phaP1Re on chromosome 1 of R. eutropha strain NSDG harboring phaCNSDG (encoding PHA synthase with broad substrate specificity). The constructed strain efficiently accumulated P(3HB-co-3HHx) on soybean oil with higher 3HHx composition when compared to the previous strain having phaJAc within pha operon. Insertion of the second phaCNSDG along with phaJAc at the phaP1Re locus led to incorporation of much larger 3HHx fraction into PHA chains, although the molecular weight was markedly reduced. The R. eutropha strains were further engineered by replacing phaP1Re with phaPAc (encoding phasin from A. caviae) on the chromosome. Interestingly, the phasin replacement increased 3HHx composition in the soybean oil-based PHA with keeping high cellular contents, nevertheless no modification was conducted in the metabolic pathways. Kinetic and Western blot analyses of PHA synthase using cellular insoluble fractions strongly suggested that the phasin replacement not only enhanced activity of PHA synthase from A. caviae but also increased affinity especially to longer (R)-3HHx-CoA. It was supposed that the increased affinity of PHA synthase to (R)-3HHx-CoA was responsible for the higher 3HHx composition in the copolyester.ConclusionsThe downstream of phaP1Re was a useful site for integration of genes to be overexpressed during PHA accumulation in R. eutropha. The results also clarified that polymerization properties of PHA synthase was affected by the kind of phasin co-existed on the surface of PHA granules, leading to altered composition of the resulting P(3HB-co-3HHx). The phasin replacement is a novel engineering strategy for regulation of composition of PHA copolyesters.Electronic supplementary materialThe online version of this article (doi:10.1186/s12934-015-0380-8) contains supplementary material, which is available to authorized users.

Construction of CoA-dependent 1-butanol synthetic pathway functions under aerobic conditions in Escherichia coli

1-Butanol is an important industrial platform chemical and an advanced biofuel. While various groups have attempted to construct synthetic pathways for 1-butanol production, efforts to construct a pathway that functions under aerobic conditions have met with limited success. Here, we constructed a CoA-dependent 1-butanol synthetic pathway that functions under aerobic conditions in Escherichia coli, by expanding the previously reported (R)-1,3-butanediol synthetic pathway. The pathway consists of phaA (acetyltransferase) and phaB (NADPH-dependent acetoacetyl-CoA reductase) from Ralstonia eutropha, phaJ ((R)-specific enoyl-CoA hydratase) from Aeromonas caviae, ter (trans-enoyl-CoA reductase) from Treponema denticola, bld (butylraldehyde dehydrogenase) from Clostridium saccharoperbutylacetonicum, and inherent alcohol dehydrogenase(s) from E. coli. To evaluate the potential of this pathway for 1-butanol production, culture conditions, including volumetric oxygen transfer coefficient (kLa) and pH were optimized in a mini-jar fermenter. Under optimal conditions, 1-butanol was produced at a concentration of up to 8.60gL−1 after 46h of fed-batch cultivation.

재조합 대장균에서 MaoC를 이용한 지방산으로부터의 중간사슬길이 폴리하이드록시알칸산 생산 연구

Biosynthesis pathway of medium-chain-length (MCL) polyhydroxyalkanoates (PHA) from fatty acid <TEX>${\beta}$</TEX>-oxidation pathway was constructed in recombinant Escherichia coli by introducing the Pseudomonas sp. 61-3 PHA synthase gene (phaC2) and the maoC genes from Pseudomonas putida, Sinorhizobium meliloti, and Ralstonia eutropha. The metabolic link between fatty acid <TEX>${\beta}$</TEX>-oxidation pathway and PHA biosynthesis pathway was constructed by MaoC, which is homologous to P. aeruginosa (R)-specific enoyl-CoA hydratase (PhaJ1). When the E. coli W3110 strains expressing the phaC2 gene and one of the maoC genes from P. putida, Sinorhizobium meliloti, and Ralstonia eutropha were cultured in LB medium containing 2 g/L of sodium decanoate as a carbon source, MCL-PHA that mainly consists of 3-hydroxyhexanoate (3HHx), 3-hydroxyoctanoate (3HO) and 3-hydroxydecanoate (3HD), was produced. The monomer composition of PHA and PHA contents varied depending on MaoC employed for the production of PHA. The highest PHA content of 18.7 wt% was achieved in recombinant E. coli W3110 expressing the phaC2 gene and the P. putida maoC gene. These results suggest that MCL-PHA biosynthesis pathway can be constructed in recombinant E. coli strains from the b-oxidation pathway by employing MaoC able to supply (R)-3-hydroxyacyl-CoA, the substrate of PHA synthase.

Production of Polyhydroxyalkanoates from Crude Glycerol Using Recombinant Escherichia coli

The high production cost of bio-based plastic polyhydroxyalkanoates (PHAs) limits their use as commercial products. Thus, systems for PHAs production from waste substrates could reduce production costs. Crude glycerol is a by-product of biodiesel fuel production and thus represents an inexpensive, abundant and promising carbon source for production of valorized fermentation products. In this study, industrial crude glycerol by-product from palm oil biodiesel production was used as the carbon source for production of PHAs by recombinant Escherichia coli. Crude glycerol supplemented at 1–5 % (v/v) supported production of poly(3-hydroxybutyrate) (P(3HB)) in E. coli-ABCAh, which harbors the PHA synthetic genes for β-ketothiolase (PhaARe), acetoacetyl-CoA reductase (PhaBRe) of Ralstonia eutropha and Polyhydroxyalkanoate (PHA) synthase (PhaCAh) of Aeromonas hydrophila. The highest P(3HB) content and productivity of 14 wt% of cell dry weight and 0.6 g/L, respectively, were obtained at 1 % (v/v) glycerol concentration. Production of P(3HB-co-3-hydroxyhexanoate) (P(3HB-co-3HHx)) was achieved using E. coli-ABCAhJAh, harboring genes for PhaARe, PhaBRe, PhaCAh, and the (R)-specific enoyl-CoA hydratase (PhaJAh) of A. hydrophila. This led to the copolymer content of 3 wt% of cell dry weight with 1 mol% of 3HHx. Molecular weight and degradation temperature of the polymers were in the range of 110–130 kDa and 295–299 °C, respectively. These results indicated that crude glycerol could be an attractive carbon source for economical production of PHAs with properties for industrial application.

Overexpression of the (R)-Specific Enoyl-CoA Hydratase Gene fromPseudomonas chlororaphisHS21 inPseudomonasStrains for the Biosynthesis of Polyhydroxyalkanoates of Altered Monomer Composition

The (R)-specific enoyl-CoA hydratase gene (phaJ(HS21)) from Pseudomonas chlororaphis HS21 was overexpressed in various Pseudomonas strains, alone and in combination with the polyhydroxyalkanoate synthase gene (phaC(HS21)), for the biosynthesis of polyhydroxyalkanoates (PHAs) of altered monomer composition. Recombinant Pseudomonas strains harboring phaC(HS21) and phaJ(HS21) generated saturated and unsaturated monomers of C12-C14 in their PHAs. In particular, the level of the 3-hydroxytetradecenoate monomer in recombinant P. chlororaphis HS21 increased by approximately 260%. PhaJ(HS21) is expected to be useful in the biosynthesis of PHAs consisting of unusual monomer units.

Precise control of repeating unit composition in biodegradable poly(3-hydroxyalkanoate) polymers synthesized by Escherichia coli

The composition of medium-chain-length (MCL) poly(3-hydroxyalkanoate) (PHA) biopolymers is normally an uncontrollable random mixture of repeating units with differing side chain lengths. Attempts to generate MCL PHA homopolymers and control repeating unit composition have been published in native PHA-producing organisms but have limited ranges for the different sizes of repeating units that can be synthesized. In this study, a new Escherichia coli-based system that exhibits control over repeating unit composition for both MCL PHAs and short-chain-length (SCL) PHAs has been developed, covering an unprecedented range of repeating units. The fadB and fadJ genes from the β-oxidation pathway were eliminated from the chromosome of E. coli LS5218. The subsequent blockage in β-oxidation caused a buildup of enoyl-CoA intermediates, which were converted to PHAs by an (R)-specific enoyl-CoA hydratase (PhaJ4) and PHA synthase [PhaC1(STQK)] expressed from a plasmid DNA construct. Fatty acid substrates were converted to PHAs with repeating units equal in the number of carbon atoms to the fatty acid substrate. The broad substrate specificities of the PhaJ4 and PhaC1(STQK) enzymes allowed for the production of homopolymers with strict control over the repeating unit composition from substrates of four to twelve carbons in length. Polymers were purified and analyzed by GC, GC-MS, and NMR for structural composition and by DSC, TGA, and GPC for thermal and physical characteristics. This study marks the development of the first single biological system to achieve consistent repeating unit control over such a broad range of repeating units in PHAs.

Studies on the Mechanism of Ring Hydrolysis in Phenylacetate Degradation: A METABOLIC BRANCHING POINT

The widespread, long sought-after bacterial aerobic phenylalanine/phenylacetate catabolic pathway has recently been elucidated. It proceeds via coenzyme A (CoA) thioesters and involves the epoxidation of the aromatic ring of phenylacetyl-CoA, subsequent isomerization to an uncommon seven-membered C-O-heterocycle (oxepin-CoA), and non-oxygenolytic ring cleavage. Here we characterize the hydrolytic oxepin-CoA ring cleavage catalyzed by the bifunctional fusion protein PaaZ. The enzyme consists of a C-terminal (R)-specific enoyl-CoA hydratase domain (formerly MaoC) that cleaves the ring and produces a highly reactive aldehyde and an N-terminal NADP(+)-dependent aldehyde dehydrogenase domain that oxidizes the aldehyde to 3-oxo-5,6-dehydrosuberyl-CoA. In many phenylacetate-utilizing bacteria, the genes for the pathway exist in a cluster that contains an NAD(+)-dependent aldehyde dehydrogenase in place of PaaZ, whereas the aldehyde-producing hydratase is encoded outside of the cluster. If not oxidized immediately, the reactive aldehyde condenses intramolecularly to a stable cyclic derivative that is largely prevented by PaaZ fusion in vivo. Interestingly, the derivative likely serves as the starting material for the synthesis of antibiotics (e.g. tropodithietic acid) and other tropone/tropolone related compounds as well as for ω-cycloheptyl fatty acids. Apparently, bacteria made a virtue out of the necessity of disposing the dead-end product with ring hydrolysis as a metabolic branching point.

Engineering of pha operon on Cupriavidus necator chromosome for efficient biosynthesis of poly(3-hydroxybutyrate- co-3-hydroxyhexanoate) from vegetable oil

Cupriavidus necator H16C Ac, previously constructed for production of poly(( R)-3-hydroxybutyrate- co-( R)-3-hydroxyhexanoate) [P(3HB- co-3HHx)] from soybean oil, was further engineered aiming to increase 3HHx composition in the copolyester. PHA synthase gene derived from Aeromonas caviae on the H16C Ac chromosome was replaced by a gene encoding the N149S/D171G mutant and this recombination enhanced PHA productivity as well as slightly increased 3HHx composition. Manipulation of phaA Cn locus partially reduced the amount of 3HB unit concomitantly with relative increase of 3HHx composition, whereas deletion of phaB1 Cn resulted in drastic decline of 3HB unit in P(3HB- co-3HHx). Insertion of phaJ Ac encoding ( R)-specific enoyl-CoA hydratase from A. caviae into pha operon significantly enlarged 3HHx fraction without negative effects on the cell growth and polyester accumulation. Consequently, efficient production of P(3HB- co-3HHx) with 3HHx composition of 5.7–9.9 mol% was successfully achieved from soybean oil by the engineered strains.

Establishment of a metabolic pathway to introduce the 3-hydroxyhexanoate unit into LA-based polyesters via a reverse reaction of β-oxidation in Escherichia coli LS5218

New lactate (LA)-based terpolymers, P[LA- co-3-hydroxybutyrate (3HB)- co-3-hydroxyhexananoate (3HHx)]s, were produced in recombinant Escherichia coli LS5218 harboring three genes encoding LA-polymerizing enzyme (LPE), propionyl-coenzyme A (CoA) transferase (PCT) and ( R)-specific enoyl-CoA hydratase (PhaJ4). When the recombinant LS5218 was grown on glucose with the feeding of butyrate, 3HB-CoA and 3HHx-CoA were supplied, probably via reverse reactions of the β-oxidation pathway and PhaJ4. LPE copolymerized the two monomers 3HB-CoA and 3HHx-CoA with LA-CoA, which was generated by PCT, to yield the terpolymers. Gas chromatography analysis revealed that the terpolymers consisted of 2.7–34 mol% LA, 38–81 mol% 3HB and 17–33 mol% 3HHx units, which can be varied depending on the butyrate concentration fed in the medium. In addition, 1H- 13C COSY NMR analysis provided evidence for a linkage between LA and 3HHx units in the polymer.

Polyhydroxyalkanoate Film Formation and Synthase Activity During In Vitro and In Situ Polymerization on Hydrophobic Surfaces

In vitro and in situ enzymatic polymerization of polyhydroxyalkanoate (PHA) on two hydrophobic surfaces, a highly oriented pyrolytic graphite (HOPG) and an alkanethiol self-assembled monolayer (SAM), was studied by atomic force microscopy (AFM) and quartz crystal microbalance (QCM), using purified Ralstonia eutropha PHA synthase (PhaC(Re)) as a biocatalyst. (R)-Specific enoyl-CoA hydratase was used to prepare R-enantiomer monomers [(R)-3-hydroxyacyl-CoA] with an acyl chain length of 4-6 carbon atoms. PHA homopolymers with different side-chain lengths, poly[(R)-3-hydroxybutyrate] [P(3HB)] and poly[(R)-3-hydroxyvalerate] [P(3HV)] were successfully synthesized from such R-enantiomer monomers on HOPG substrates. After the reaction, the surface morphologies were analyzed by AFM, revealing a nanometer thick PHA film. The same biochemical polymerization process was observed on an alkanethiol (C18) SAM surface fabricated on a gold electrode using QCM. This analysis showed that a complex sequence of PhaC(Re) adsorption and PHA polymerization has occurred on the hydrophobic surface. On the basis of these observations, the possible mechanisms of the PhaC(Re)-catalyzed polymerization reaction on the surface of hydrophobic substrates are proposed.

Biosynthesis of polyhydroxyalkanoate copolyesters by Aeromonas hydrophila mutant expressing a low-substrate-specificity PHA synthase PhaC2 Ps

A polyhydroxyalkanoate (PHA) synthase negative mutant termed Aeromonas hydrophila CQ4 was constructed from its wild type strain A. hydrophila 4AK4. Heterologous expression of a low-substrate-specificity PHA synthase PhaC2 Ps cloned from Pseudomonas stutzeri 1317 in A. hydrophila CQ4 could copolymerize short-chain-length (SCL) 3-hydroxybutyrate (3HB) and medium-chain-length (MCL) 3-hydroxyalkanoates (3HA). Co-expressing (R)-specific enoyl-CoA hydratase and PHA synthase PhaC2 Ps in A. hydrophila CQ4 ( phaJ Ah , phaC2 Ps ) led to accumulation of 20.86 wt% PHA copolyesters containing 59 mol% 3HB, 37 mol% 3-hydroxyhexanoate (3HHx) and 4 mol% of other MCL 3HA in shake flask culture. When grown in fermentor, cellular dry weight (CDW) and PHA content were 22.75 g L −1 and 20.08 wt%, respectively, with 72.38 mol% 3HB, 25.18 mol% 3HHx and 2.45 mol% other MCL 3HA in the copolymer. If beta-ketothiolase and acetoacetyl-CoA reductase of Ralstonia eutropha were co-expressed with PhaC2 Ps, A. hydrophila CQ4 ( phaC2 Ps , phbA Re , phbB Re ) accumulated PHA copolyesters containing enhanced 3HB content up to 79.95 mol% and reduced 3HHx fraction of 8.55 mol%. When grown in fermentor it produced 16.28 g L −1 CDW containing 11.64 wt% PHA consisting of 87.38 mol% 3HB, 9.75 mol% 3HHx and 2.87 mol% other MCL 3HA. These results further demonstrate that A. hydrophila is a good candidate for metabolic engineering for diverse PHA production.

Engineered Aeromonas hydrophila for enhanced production of poly(3-hydroxybutyrate- co-3-hydroxyhexanoate) with alterable monomers composition

Aeromonas hydrophila 4AK4 produces poly(3-hydroxybutyrate- co-3-hydroxyhexanoate) (PHBHHx) containing 3-hydroxybutyrate (3HB) and about 15 mol% 3-hydroxyhexanoate (3HHx) from dodecanoate. To study the factors affecting the monomer composition and PHBHHx content, genes encoding phasin ( phaP), PHA synthase ( phaC) and ( R)-specific enoyl-CoA hydratase ( phaJ) from Aeromonas punctata (formerly named Aeromonas caviae) were introduced individually or jointly into A. hydrophila 4AK4. The phaC gene increased 3HHx fraction more significantly than phaP, while phaJ had little effect. Expression of phaC alone increased the 3HHx fraction from 14 to 22 mol%. When phaC was co-expressed with phaP and phaJ, the 3HHx fraction increased from 14 to 34 mol%. Expression of phaP or phaC alone or with another gene enhanced PHBHHx content up to 64%, cell dry weight (CDW) as much as 4.4 g L −1 and PHBHHx concentration to 2.7 g L −1 after 48 h in shake flask culture. The results suggest that a higher PHA synthase activity could lead to a higher 3HHx fraction and PHBHHx content. Co-expression of phaJ with phaC or phaP would favor PHA accumulation, although over-expression of phaJ did not affect PHA synthesis much. In addition, inhibition of β-oxidation by acrylate in A. hydrophila 4AK4 enhanced PHBHHx content. However, no monomers longer than 3HHx were detected. The results show that genetic modification of A. hydrophila 4AK4 enhanced PHBHHx production and altered monomer composition of the polymer.

Identification and characterization of a new enoyl coenzyme A hydratase involved in biosynthesis of medium-chain-length polyhydroxyalkanoates in recombinant Escherichia coli.

The biosynthetic pathway of medium-chain-length (MCL) polyhydroxyalkanoates (PHAs) from fatty acids has been established in fadB mutant Escherichia coli strain by expressing the MCL-PHA synthase gene. However, the enzymes that are responsible for the generation of (R)-3-hydroxyacyl coenzyme A (R3HA-CoAs), the substrates for PHA synthase, have not been thoroughly elucidated. Escherichia coli MaoC, which is homologous to Pseudomonas aeruginosa (R)-specific enoyl-CoA hydratase (PhaJ1), was identified and found to be important for PHA biosynthesis in a fadB mutant E. coli strain. When the MCL-PHA synthase gene was introduced, the fadB maoC double-mutant E. coli WB108, which is a derivative of E. coli W3110, accumulated 43% less amount of MCL-PHA from fatty acid compared with the fadB mutant E. coli WB101. The PHA biosynthetic capacity could be restored by plasmid-based expression of the maoCEc gene in E. coli WB108. Also, E. coli W3110 possessing fully functional beta-oxidation pathway could produce MCL-PHA from fatty acid by the coexpression of the maoCEc gene and the MCL-PHA synthase gene. For the enzymatic analysis, MaoC fused with His6-Tag at its C-terminal was expressed in E. coli and purified. Enzymatic analysis of tagged MaoC showed that MaoC has enoyl-CoA hydratase activity toward crotonyl-CoA. These results suggest that MaoC is a new enoyl-CoA hydratase involved in supplying (R)-3-hydroxyacyl-CoA from the beta-oxidation pathway to PHA biosynthetic pathway in the fadB mutant E. coli strain.

Crystal Structure of the (R)-Specific Enoyl-CoA Hydratase from Aeromonas caviae Involved in Polyhydroxyalkanoate Biosynthesis

The (R)-specific enoyl coenzyme A hydratase ((R)-hydratase) from Aeromonas caviae catalyzes the addition of a water molecule to trans-2-enoyl coenzyme A (CoA), with a chain-length of 4-6 carbons, to produce the corresponding (R)-3-hydroxyacyl-CoA. It forms a dimer of identical subunits with a molecular weight of about 14,000 and is involved in polyhydroxyalkanoate (PHA) biosynthesis. The crystal structure of the enzyme has been determined at 1.5-A resolution. The structure of the monomer consists of a five-stranded antiparallel beta-sheet and a central alpha-helix, folded into a so-called "hot dog" fold, with an overhanging segment. This overhang contains the conserved residues including the hydratase 2 motif residues. In dimeric form, two beta-sheets are associated to form an extended 10-stranded beta-sheet, and the overhangs obscure the putative active sites at the subunit interface. The active site is located deep within the substrate-binding tunnel, where Asp(31) and His(36) form a catalytic dyad. These residues are catalytically important as confirmed by site-directed mutagenesis and are possibly responsible for the activation of a water molecule and the protonation of a substrate molecule, respectively. Residues such as Leu(65) and Val(130) are situated at the bottom of the substrate-binding tunnel, defining the preference of the enzyme for the chain length of the substrate. These results provide target residues for protein engineering, which will enhance the significance of this enzyme in the production of novel PHA polymers. In addition, this study provides the first structural information of the (R)-hydratase family and may facilitate further functional studies for members of the family.

Engineering of Ralstonia eutropha for production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) from fructose and solid-state properties of the copolymer.

Recombinant Ralstonia eutropha capable of producing poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) copolymer [P(3HB-co-3HHx)] from fructose was engineered by introduction of genes for crotonyl-CoA reductase (CCR) from Streptomyces cinnamonensis (ccrSc) and for PHA synthase and (R)-specific enoyl-CoA hydratase from Aeromonas caviae (phaC-JAc). In this recombinant strain, C6-acyl-CoA intermediates were provided via beta-ketothiolase-mediated elongation of butyryl-CoA, which was generated from crotonyl-CoA by the function of CCR. The recombinant strain could accumulate the copolyester up to 48 wt % of dry cell weight with 1.5 mol % of 3HHx fraction from fructose, when the expression of ccrSc under the control of the PBAD promoter was induced with 0.01% L-arabinose. The absence of L-arabinose or the deletion of ccrSc from the plasmid resulted in accumulation of poly(3-hydroxybutyrate) homopolymer, indicating the critical role of CCR in the formation of the 3-hydroxyhexanoate unit. Higher CCR activity obtained by the addition of a larger amount of L-arabinose did not affect the composition but reduced the intracellular content of the copolyester. The P(3HB-co-1.5 mol % 3HHx) copolyester produced from fructose by the recombinant R. eutropha showed relatively lower melting temperatures (150 degrees C and 161 degrees C) and lower crystallinity (48 +/- 5%) compared to those (175 degrees C and 60 +/- 5%) of P(3HB) homopolymer. It has been found that the incorporation of a small amount (1.5 mol %) of 3HHx units into P(3HB) sequences leads to a remarkable change in the solid-state properties of P(3HB) crystals. The present study demonstrates the potential of the engineered pathway for the production of copolyesters having favorable characteristics from inexpensive carbon resources.