Specific Absorption Rate Limits Research Articles

Evaluation and SAR Analysis of Low Frequency and Broadband Electric Field Exposure Measurement Values in the Home Environment

In this study, the effective value of low-frequency (50 Hz) and high-frequency (700–2500 MHz) broadband electric field exposures was measured for 24 h in four different selected environments in a house. All the statistical values of 1000 data points recorded with two measuring devices for 24 h in each environment are calculated, the most appropriate curves are fitted to the data, and the curves are plotted by expressing their changes with respect to time. All statistical and parametric values of the density and cumulative probability functions of the curves are calculated and plotted. In broadband measurements, the broadband is divided into fifteen sub-bands, but the data are available in only six of these sub-bands. The six-layer human head model is created by using the middle frequencies of the six sub-bands used, and taking the permittivity (εr) and conductivity (σ) of each layer into consideration. The specific absorption rate (SAR) value in the brain is calculated by using the total transmission coefficient of six layers. The SAR value surrounding the head is obtained. These SAR values are interpreted by considering the Federal Communications Commission (FCC) and the Community European (CE) occupational and general public SAR limits.

Enhanced Circularly Polarized Antenna for Body Centric Communication

Abstract: This study introduces a miniaturized circularly polarized ultra-wideband (UWB) antenna designed specifically for body-centric communication applications, with a focus on its performance across different frequencies. Fabricated on jean fabric, the antenna offers exceptional flexibility and seamless integration into clothing, making it ideal for wearable devices. The design achieves circular polarization through the utilization of an asymmetric stepped L-shaped ground plane and a crossshaped stub integrated into the radiator structure.Operating across the UWB frequency spectrum ranging from 3 GHz to 9.5 GHz, the antenna exhibits consistent and reliable performance in terms of gain, radiation pattern, and current distribution. ensuring effective signal transmission and reception. Importantly, the antenna complies with FCC specific absorption rate (SAR) limits, ensuring safety in wearable applications.Throughout the frequency range, the antenna maintains an omnidirectional radiation pattern, facilitating reliable on-body communication regardless of orientation. This characteristic is crucial for maintaining connectivity and signal quality in body-centric communication systems.Analysis of the current distribution confirms the antenna's effectiveness across different frequency bands, further validating its performance and suitability for body-centric communication applications.

Vivaldi Tapered Slot Antenna for Microwave Imaging in Medical Applications

Microwave imaging has become an active research area in recent years, owing primarily to advancements in detecting the early stages of cancer. The study aimed to create a high-gain compact Vivaldi Tapered Slot antenna (VTSA) for microwave imaging in medical applications and also aims to address several challenges in the development of microwave imaging (MWI) technology for medical applications. These challenges include the ability to detect and identify abnormalities in human tissue and considering safe Specific Absorption Rate (SAR) limits for patients, the approach of balancing of penetration and resolution can be done on the design. The antenna operates at frequencies ranging from 1.7 to 3.1 GHz and is built on a low-cost Flame Retardant-4 (FR-4) substrate with a thickness of 1.6 mm. A compact exponential VTSA is initially presented while designing the proposed antenna for broad impedance bandwidth performances. The simulation used a back-to-back linear array of antennas with or without a phantom, specifically a without phantom (only antennas), a water phantom (cube shape), and an anomaly inside the water phantom. The results revealed a significant shift in the signal graph between the three results, indicating a difference in values between the three simulations. A transient domain solver calculation was used in the simulation. The designed antenna improved a gain of 6.09 dBi and a SAR of 0.326 W/kg by maximizing the edges of the exponential in the tapered section and the feedline slot area. The antenna exhibits differences in scattering parameters on each simulation of anomalies across the required frequency range. The result finds suitability of the experiment and simulation in assessing the microwave imaging capabilities. With the data presented, simulated antennas can be used for microwave imaging. The next study should aim on making a suitable imaging system with dimensions that supported in the antenna range and specifications.

Induced Current Electro-Thermal Imaging for Breast Tumor Detection: A Numerical and Experimental Study.

This study proposes using magnetically induced currents in medical infrared imaging to increase the temperature contrast due to the electrical conductivity differences between tumors and healthy tissues. There are two objectives: (1) to investigate the feasibility of this active method for surface and deep tumors using numerical simulations, and (2) to demonstrate the use of this method through different experiments conducted with phantoms that mimic breast tissues. Tumorous breasts were numerically modeled and simulated in active and passive modes. At 750kHz, the applied current was limited for breast tissue-tumor conductivities (0.3S/m and0.75S/m) according to the local specific absorption rate limit of 10W/kg.Gelatin-based and mashed potato phantoms were produced to mimic tumorous breast tissues. In the simulation studies, the induced current changed the temperature contrast on the imaging surface, and the tumor detection sensitivity increased by 4mm.An 11-turn 70-mm-long solenoid coil was constructed, 20A current was applied for deep tumors, and a difference of up to 0.4 C was observed in the tumor location compared with the temperature in the absence of the tumor.Similarly, a 23-turn multi-layer coil was constructed, and a temperature difference of 0.4 C was observed. The temperature contrast on the body surface changed, and the tumor detection depth increased with the induced currents in breast IR imaging. The proposed active thermal imaging method was validated using numerical simulations and in vitro experiments.

Sidebands in CEST MR-How to recognize and avoid them.

Clinical scanners require pulsed CEST sequences to maintain amplifier and specific absorption rate limits. During off-resonant RF irradiation and interpulse delay, the magnetization can accumulate specific relative phases within the pulse train. In this work, we show that these phases are important to consider, as they can lead to unexpected artifacts when no interpulse gradient spoiling is performed during the saturation train. We investigated sideband artifacts using a CEST-3D snapshot gradient-echo sequence at 3 T. Initially, Bloch-McConnell simulations were carried out with Pulseq-CEST, while measurements were performed in vitro and in vivo. Sidebands can be hidden in Z-spectra, and their structure becomes clearly visible only at high sampling. Sidebands are further influenced by B0 inhomogeneities and the RF phase cycling within the pulse train. In vivo, sidebands are mostly visible in liquid compartments such as CSF. Multi-pulse sidebands can be suppressed by interpulse gradient spoiling. We provide new insights into sidebands occurring in pulsed CEST experiments and show that, similar as in imaging sequences, gradient and RF spoiling play an important role. Gradient spoiling avoids misinterpretations of sidebands as CEST effects especially in liquid environments including pathological tissue or for CEST resonances close to water. It is recommended to simulate pulsed CEST sequences in advance to avoid artifacts.

Investigation of alternative RF power limit control methods for 0.5T, 1.5T, and 3T parallel transmission cardiac imaging: A simulation study.

To investigate safety and performance aspects of parallel-transmit (pTx) RF control-modes for a body coil at . Electromagnetic simulations of 11 human voxel models in cardiac imaging position were conducted for , and and a body coil with a configurable number of transmit channels (1, 2, 4, 8, 16). Three safety modes were considered: the 'SAR-controlled mode' (SCM), where specific absorption rate (SAR) is limited directly, a 'phase agnostic SAR-controlled mode' (PASCM), where phase information is neglected, and a 'power-controlled mode' (PCM), where the voltage amplitude for each channel is limited. For either mode, safety limits were established based on a set of 'anchor' simulations and then evaluated in 'target' simulations on previously unseen models. The comparison allowed to derive safety factors accounting for varying patient anatomies. All control modes were compared in terms of the amplitude and homogeneity they permit under their respective safety requirements. Large safety factors (approximately five) are needed if only one or two anchor models are investigated but they shrink with increasing number of anchors. The achievable is highest for SCM but this advantage is reduced when the safety factor is included. PCM appears to be more robust against variations of subjects. PASCM performance is mostly in between SCM and PCM. Compared to standard circularly polarized (CP) excitation, pTx offers minor improvements if local SAR limits are always enforced. PTx body coils can safely be used at . Uncertainties in patient anatomy must be accounted for, however, by simulating many models.

Local SAR management strategies to use two-channel RF shimming for fetal MRI at 3 T.

This study evaluates the imaging performance of two-channel RF-shimming for fetal MRI at 3 T using four different local specific absorption rate (SAR) management strategies. Due to the ambiguity of safe local SAR levels for fetal MRI, local SAR limits for RF shimming were determined based on either each individual's own SAR levels in standard imaging mode (CP mode) or the maximum SAR level observed across seven pregnant body models in CP mode. Local SAR was constrained either indirectly by further constraining the whole-body SAR (wbSAR) or directly by using subject-specific local SAR models. Each strategy was evaluated by the improvement of the transmit field efficiency (average |B1 + |) and nonuniformity (|B1 + | variation) inside the fetus compared with CP mode for the same wbSAR. Constraining wbSAR when using RF shimming decreases B1 + efficiency inside the fetus compared with CP mode (by 12%-30% on average), making it inefficient for SAR management. Using subject-specific models with SAR limits based on each individual's own CP mode SAR value, B1 + efficiency and nonuniformity are improved on average by 6% and 13% across seven pregnant models. In contrast, using SAR limits based on maximum CP mode SAR values across seven models, B1 + efficiency and nonuniformity are improved by 13% and 25%, compared with the best achievable improvement without SAR constraints: 15% and 26%. Two-channel RF-shimming can safely and significantly improve the transmit field inside the fetus when subject-specific models are used with local SAR limits based on maximum CP mode SAR levels in the pregnant population.

Fast and robust pulsed chemical exchange saturation transfer (CEST) MRI using a quasi-steady-state (QUASS) algorithm at 3 T

Chemical exchange saturation transfer (CEST) has emerged as a powerful technique to image dilute labile protons. However, its measurement depends on the RF saturation duration (Tsat) and relaxation delay (Trec). Although the recently developed quasi-steady-state (QUASS) solution can reconstruct equilibrium CEST effects under continuous-wave RF saturation, it does not apply to pulsed-CEST MRI on clinical scanners with restricted hardware or specific absorption rate limits. This study proposed a QUASS algorithm for pulsed-CEST MRI and evaluated its performance in muscle CEST measurement. An approximated expression of a steady-state pulsed-CEST signal was incorporated in the off-resonance spin-lock model, from which the QUASS pulsed-CEST effect was derived. Numerical simulation, creatine phantom, and healthy volunteer scans were conducted at 3 T. The CEST effect was quantified with asymmetry analysis in the simulation and phantom experiments. CEST effects of creatine, amide proton transfer, phosphocreatine, and combined magnetization transfer and nuclear Overhauser effects were isolated from a multi-pool Lorentzian model in muscles. Apparent and QUASS CEST measurements were compared under different Tsat/Trec and duty cycles. Paired Student's t-test was employed with P < 0.05 as statistically significant. The simulation, phantom, and human studies showed the strong impact of Tsat/Trec on apparent CEST measurements, which were significantly smaller than the corresponding QUASS CEST measures, especially under short Tsat/Trec times. In comparison, the QUASS algorithm mitigates such impact and enables accurate CEST measurements under short Tsat/Trec times. In conclusion, the QUASS algorithm can accelerate robust pulsed-CEST MRI, promising the efficient detection and evaluation of muscle diseases in clinical settings.

Influence of patient head definition on induced E-fields during MR examination.

Radiofrequency (RF) exposure during MR examination is limited by IEC 60601-2-33 to prevent thermal hazards to patients. These limits are also the basis to derive the maximum induced field for the demonstration of MR safety of implants per ISO/TS 10974 (2018). One limit is the head-averaged specific absorption rate (SAR), for which the head extent is defined differently by MR and implant vendors. The purpose of this technical note is to inform MR safety stakeholders on the sensitivity of safety evaluations due to different head extent definitions. RF distributions from the validated MRIxViP exposure libraries of 12 high-resolution human anatomical models were scaled to the normative SAR limits for different definitions of the head extent to compare the corresponding induced SAR and electric (E-)field levels. The definitions of the head extent used by major implant vendors and defined in ISO/TS 10974 (2018) are larger than those introduced in IEC 60601-2-33 (2022), resulting in lower RF head exposure by up to 2.4 dB (factor 1.7). Other proposed definitions of the head result in intermediate values. The different head extents result in different maximum RF exposures affecting the risk assessment by up to a factor of 1.7. The results of this study can be used to estimate the additional uncertainty in safety assessments. Future revisions of MR standards should eliminate this inconsistency.

Fast spin-echo approach for accelerated B1 gradient-based MRI.

To expand on the previously developed -encoding technique, frequency-modulated Rabi-encoded echoes (FREE), to perform accelerated image acquisition by collecting multiple lines of k-space in an echo train. FREE uses adiabatic full-passage pulses and a spatially varying RF field to encode unique spatial information without the use of traditional B0 gradients. The original implementation relied on acquiring single lines of k-space, leading to long acquisitions. In this work, an acceleration scheme is presented in which multiple echoes are acquired in a single shot, analogous to conventional fast spin-echo sequences. Theoretical analysis and computer simulations investigated the feasibility of this approach and presented a framework to analyze important imaging parameters of FREE-based sequences. Experimentally, the multi-echo approach was compared with conventional phase-encoded images of the human visual cortex using a simple surface transceiver coil. Finally, different contrasts demonstrated the clinical versatility of the new accelerated sequence. Images were acquired with an acceleration factor of 3.9, compared with the previous implementation of FREE, without exceeding specific absorption rate limits. Different contrasts can easily be acquired without major modifications, including inversion recovery-type images. FREE initially illustrated the feasibility of performing slice-selective 2D imaging of the human brain without the need for a B0 gradient along the y-direction. The multi-echo version maintains the advantages that encoding provides but represents an important step toward improving the clinical feasibility of such sequences. Additional acceleration and more advanced reconstruction techniques could further improve the clinical viability of FREE-based techniques.

Smart Wireless-Powering-Enabling IoT in Inhomogeneous Environments: A Case Study on Biomedical Applications

Wireless powering holds the key to unlock the use of batteryless micro/nanodevices inside the human body for research, monitoring, and treating health conditions, and enables precise and personalized healthcare technological solutions. As the era of IoT emerges, wireless devices become more prevalent and capable than ever. In the medical field, this transformation is also highly anticipated. From in-body networks of tiny static devices, to freely moving implants inside the body, e.g., using the blood stream, the possibilities are endless. Their limits, however, are miniaturization capabilities and power availability. Despite the great potential, most wireless-powering solutions are developed for a single static device in a virtually immutable environment. In contrast, we present a system with the ability to power different static places or a moving device, without prior knowledge of its location nor the medium. The system focuses power on the target location(s) through beamforming. The methodology introduced by this work increased the power provided to a wireless test device by up to 18 dB in torso and leg models, and 25 dB in a skull model, relatively to a traditional wireless power transfer (WPT) system and without surpassing specific absorption rate (SAR) limits.

Design of a Novel Compact MICS Band PIFA Antenna for Implantable Biotelemetry Applications

An implantable stacked planar inverted-F antenna (PIFA) for biotelemetric communication in the 402-405 MHz Medical Implant Communications Service (MICS) frequency band is designed and fabricated. With the proposed PIFA structure, a slot on each radiating patch was embedded, resulting in a size reduction of 0.013 λ and a compact size of 10 × 10 × 1.905 mm3. Both in vitro and in vivo experiments verified the simulation performance with characteristics of -10 dB bandwidth of 29 MHz, radiation efficiency of 0.9%, and a maximum far-field gain of -18.8 dB. We calculated the safety power delivered to the antenna using the specific absorption rate (SAR) limitation standard. Compared to other implantable antennas for biotelemetry, this antenna performs comparably and has a smaller size. This design would further develop implantable medical devices that communicate in the MICS band.

A Deionized Water-Infilled Dual-Layer Insulator-Applied Brain-Implanted UWB Antenna for Wireless Biotelemetry Applications

We propose a novel double-layered insulator configuration for a human-brain-implanted impulse radio ultra-wideband (IR-UWB) antenna. The dimension of the antenna is <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$10.0\times 11.0\times0.954$ </tex-math></inline-formula> mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sup> , including the dual-layer insulator. The insulator provides a dielectric loading effect of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\varepsilon _{r}~\approx ~50$ </tex-math></inline-formula> (lossless) for obtaining an improved radiating power and the broadband-impedance-matching characteristic in brain tissues. The outer layer is made of biocompatible 3-D printing material, and the inner insulator is filled with deionized water with <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\varepsilon _{r}~\approx ~80$ </tex-math></inline-formula> and loss tangent (tan <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\delta$ </tex-math></inline-formula> ) <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\approx ~0.25$ </tex-math></inline-formula> at 4 GHz. A slotted UWB antenna with the proposed insulator is located between the emulated dura and CSF tissues inside the skull for brain signal detection. The design uses a multilayer phantom, mimicking the seven tissue layers of the brain. The impedance and radiation performance of the proposed antenna configuration are also discussed using the commercial high-precision human phantom model. The designed IR-UWB antenna shows a boresight radiation characteristic toward the top of the head with a proper high gain in the target frequency of 3–5 GHz. The computed expectations are verified experimentally. Furthermore, it is demonstrated that the UWB spectrum generated from a UWB radio-frequency (RF) transmitter can be transmitted stably using the proposed antenna as a transmitting antenna. In addition, the link budget of the system setup is analyzed. The improved gain characteristic of the antenna from the proposed dual-layer insulator can be utilized to retain the link margins while satisfying the UWB communication regulation and average specific absorption rate (SAR) limitation.

Myocardial Approximate Spin-lock Dispersion Mapping using a Simultaneous T2 and TRAFF2 Mapping at 3T MRI.

Ischemic heart disease (IHD) is one of the leading causes of death worldwide. Myocardial infarction (MI) represents a third of all IHD cases, and cardiac magnetic resonance imaging (MRI) is often used to assess its damage to myocardial viability. Late gadolinium enhancement (LGE) is the current gold standard, but the use of gadolinium-based agents limits the clinical applicability in some patients. Spin-lock (SL) dispersion has recently been proposed as a promising non-contrast biomarker for the assessment of MI. However, at 3T, the required range of SL preparations acquired at different amplitudes suffers from specific absorption rate (SAR) limitations and off-resonance artifacts. Relaxation Along a Fictitious Field (RAFF) is an alternative to SL preparations with lower SAR requirements, while still sampling relaxation in the rotating frame. In this study, a single breath-hold simultaneous TRAFF2 and T2 mapping sequence is proposed for SL dispersion mapping at 3T. Excellent reproducibility (coefficient of variations lower than 10%) was achieved in phantom experiments, indicating good intrascan repeatability. The average myocardial TRAFF2, T2, and SL dispersion obtained with the proposed sequence (68.0±10.7 ms, 44.0±4.0 ms, and 0.4±0.2 ×10-4 s2, respectively) were comparable to the reference methods (62.7±11.7 ms, 41.2±2.4 ms, and 0.3±0.2x 10-4s2, respectively). High visual map quality, free of B0 and B1+ related artifacts, for T2, TRAFF2, and SL dispersion maps were obtained in phantoms and in vivo, suggesting promise in clinical use at 3T. Clinical relevance - and imaging promises non-contrast assessment of scar and focal fibrosis in a single breath-hold using approximate spin-lock dispersion mapping.

Evaluation of specific absorption rate and heating in children exposed to a 7T MRI head coil.

PurposeTo evaluate specific absorption rate (SAR) and temperature distributions resulting from pediatric exposure to a 7T head coil.MethodsExposure from a 297‐MHz birdcage head transmit coil (CP mode single‐channel transmission) was simulated in several child models (ages 3–14, mass 13.9–50.4 kg) and one adult, using time‐domain electromagnetic and thermal solvers. Position variability, age‐related changes in dielectric properties, and differences in thermoregulation were also considered.ResultsAge‐adjusted dielectric properties had little effect in this population. Head average SAR (hdSAR) was the limiting factor for all models centered in the coil. The value of hdSAR (normalized to net power) was found to decrease linearly with increasing mass (R2 = 0.86); no equivalent relationship for peak‐spatial 10g averaged SAR (psSAR10g) was identified. Relatively small (< 10%) variability was observed in hdSAR for position shifts of ±25 mm in each orthogonal direction when normalized to net power; accounting for B1+ efficiency can lead to much larger variability. Position sensitivity of psSAR10g was greater, but in most cases hdSAR remained the limiting quantity.For thermal simulations, if blood temperature is fixed (i.e., asserting good thermoregulation), maximum temperatures are compliant with International Electrotechnical Commission limits during 60‐min exposure at the SAR limit. Introducing variable blood temperature leads to core temperature changes proportional to whole‐body averaged SAR, exceeding guideline limits for all child models.ConclusionsChildren experienced higher SAR than adults for the 297‐MHz head transmit coil examined in this work. Thermal simulations suggest that core temperature changes could occur in smaller subjects, although experimental data are needed for validation.

A Multi-Frequency 3D Printed Hand Phantom for Electromagnetic Measurements.

It has been shown that the presence of a hand holding a wireless handset (cell phone) can influence antenna efficiency and the measurement of specific absorption rate (SAR) and electromagnetic compatibility. Head phantoms, used in handset compliance testing to estimate SAR in the head, have achieved low cost and multi-frequency use. Head phantoms typically consist of a thin plastic shell, open on the top, holding a tissue simulating fluid. The specific simulant fluid used is determined by the radio frequency of the test. IEC 62209-1 has recipes, using safe nontoxic materials, for all the required frequency bands. Thus, head phantoms can be reused at different frequencies simply by changing the tissue simulating fluid. However, standards have not adopted the use of hand phantoms because SAR limits in limbs are less restrictive than the head, the tissue depth in a hand is insufficient to make accurate measurements with current electric field probes, and the cost of a solid hand phantom is limited to a single frequency band. Our goal was to determine whether 3D printing techniques would allow the construction of a hand phantom with the same utility as existing head phantoms. We developed this phantom based on computer simulations to determine how much human anatomy needed to be included in the phantom to obtain results consistent with actual use. Electric field scans of a handset alone, and held by the hand phantom, were performed. Comparison of handset scans using the phantom and human subjects was planned, but not performed due to Covid-19 restrictions and subsequent changes in priorities. We feel a fluid-filled 3D printed hand phantom is viable and practical. The 3D print files are available on GitHub.

Performance and safety assessment of an integrated transmit array for body imaging at 7T under consideration of specific absorption rate, tissue temperature, and thermal dose.

In this study, the performance of an integrated body-imaging array for 7T with 32 radiofrequency (RF) channels under consideration of local specific absorption rate (SAR), tissue temperature, and thermal dose limits was evaluated and the imaging performance was compared with a clinical 3 T body coil. Thirty-two transmit elements were placed in three rings between the bore liner and RF shield of the gradient coil. Slice-selective RF pulse optimizations for B1 shimming and spokes were performed for differently oriented slices in the body under consideration of realistic constraints for power and local SAR. To improve the B1+ homogeneity, safety assessments based on temperature and thermal dose were performed to possibly allow for higher input power for the pulse optimization than permissible with SAR limits. The results showed that using two spokes, the 7 T array outperformed the 3 T birdcage in all the considered regions of interest. However, a significantly higher SAR or lower duty cycle at 7T is necessary in some cases to achieve similar B1+ homogeneity as at 3T. The homogeneity in up to 50 cm-long coronal slices can particularly benefit from the high RF shim performance provided by the 32 RF channels. The thermal dose approach increases the allowable input power and the corresponding local SAR, in one example up to 100 W/kg, without limiting the exposure time necessary for an MR examination. In conclusion, the integrated antenna array at 7T enables a clinical workflow for body imaging and comparable imaging performance to a conventional 3 T clinical body coil.

Dependence of specific absorption rate and its distribution inside a homogeneous fruit model on frequency, angle of incidence, and wave polarization

Abstract Electromagnetic regulatory guidelines prescribed by the international and national organizations are in effect worldwide to protect humans from immediate health effects. For restricting human exposure to electromagnetic radiation in near field, a quantitative term ‘specific absorption rate (SAR) limit’ has been coined and well established in literature. In addition, reference power density limit has also been prescribed in far field for human safety. At the same time, plants and fruits also absorb reasonable amount of electromagnetic energy due to high permittivity and electrical conductivity. Unfortunately, there is not much concern regarding electromagnetic energy absorption in plants and fruits, and no prescribed SAR limit in spite of recent reports in literature. Unlike humans, plants and fruits are of asymmetric shapes and sizes; therefore even at a particular frequency and fixed reference power density, electromagnetic energy absorption rate i.e., SAR in plants and fruits is expected to differ depending upon angle of incidence and wave polarization. To address these issues in detail, a typical bunch of three single layered water apples has been prototyped and exposed to plane wave irradiation at five different frequency bands as per the existing Indian electromagnetic regulatory guidelines. Broadband dielectric properties of water apples have been measured using open ended coaxial probe technique; thereafter, measured dielectric properties have been fed into the designed model. At a particular frequency, reasonable variations in magnitude and position of maximum local point (MLP) SAR, 1 g averaged SAR, and 10 g averaged SAR data have been noted for six different combinations of angle of incidence and wave polarization. This whole course of action is repeated over five different frequency bands. Moreover, variations in observed SAR data are also compared with previously reported variations in SAR data for a multilayer fruit structure. Observations indicate different order of changes in SAR for different fruit structures due to similar combinations of frequency, power density, angle of incidence, and wave polarization. Hence, direct definition of SAR limits for plant and fruit structures should be adopted even in far field in conjunction with reference power density.

Quarter-Wave Plates to Improve Rotational Misalignment Robustness in Medical Telemetry.

A major challenge in developing robust wireless links to implanted/ingestible antennas is the potential for rotational misalignment. In this paper, we present an artificially anisotropic quarter-wave plate (QWP) capable of developing a circularly polarized wave from a linearly polarized wave. Without loss of generality, our QWP is composed of plastic and hydrogel, while the linearly polarized wave is developed by a bio-matched antenna-a high gain, broadband antenna with a dielectric engineered to match to biological tissues. Using a basic implanted patch antenna, we demonstrate a 1.00 dB (1.26) variance in transmission coefficient over a 90° variance, with a remarkable average measured transmission coefficient of -34.4 dB (3.63 × 10-4 ) at 2.4 GHz. Without the QWP, the rotational variance is 12.52 dB (17.9). Notably, the QWP increases the maximum input power to comply with specific absorption rate limitations. In our case, this allows for -15.0 dBm (31.6 µW) of power to be received by the implant, which is comparable to the -15.7 dBm (26.9 µW) received without the QWP. Additionally, we demonstrate that with the QWP, the standard deviation from the mean transmission for rotational misalignments remains below 3 dB (2.00) from 2 to 3.62 GHz, resulting in a simulated 57.7% fractional bandwidth. © 2021 Bioelectromagnetics Society.

Reducing SAR in 7T brain fMRI by circumventing fat suppression while removing the lipid signal through a parallel acquisition approach

Ultra-high-field functional magnetic resonance imaging (fMRI) offers a way to new insights while increasing the spatial and temporal resolution. However, a crucial concern in 7T human MRI is the increase in power deposition, supervised through the specific absorption rate (SAR). The SAR limitation can restrict the brain coverage or the minimal repetition time of fMRI experiments. In the majority of today’s studies fMRI relies on the well-known gradient-echo echo-planar imaging (GRE-EPI) sequence, which offers ultrafast acquisition. Commonly, the GRE-EPI sequence comprises two pulses: fat suppression and excitation. This work provides the means for a significant reduction in the SAR by circumventing the fat-suppression pulse. Without this fat-suppression, however, lipid signal can result in artifacts due to the chemical shift between the lipid and water signals. Our approach exploits a reconstruction similar to the simultaneous-multi-slice method to separate the lipid and water images, thus avoiding undesired lipid artifacts in brain images. The lipid-water separation is based on the known spatial shift of the lipid signal, which can be detected by the multi-channel coils sensitivity profiles. Our study shows robust human imaging, offering greater flexibility to reduce the SAR, shorten the repetition time or increase the volume coverage with substantial benefit for brain functional studies.