Spatially Modulated Illumination Research Articles

Spatially modulated illumination microscopy: application perspectives in nuclear nanostructure analysis

Thousands of genes and the complex biochemical networks for their transcription are packed in the micrometer sized cell nucleus. To control biochemical processes, spatial organization plays a key role. Hence the structure of the cell nucleus of higher organisms has emerged as a main topic of advanced light microscopy. So far, a variety of methods have been applied for this, including confocal laser scanning fluorescence microscopy, 4Pi-, STED- and localization microscopy approaches, as well as (laterally) structured illumination microscopy (SIM). Here, we summarize the state of the art and discuss application perspectives for nuclear nanostructure analysis of spatially modulated illumination (SMI). SMI is a widefield-based approach to using axially structured illumination patterns to determine the axial extension (size) of small, optically isolated fluorescent objects between less than or equal to 200 nm and greater than or equal to 40 nm diameter with a precision down to the few nm range; in addition, it allows the axial positioning of such structures down to the 1 nm scale. Combined with SIM, a three-dimensional localization precision of less than or equal to 1 nm is expected to become feasible using fluorescence yields typical for single molecule localization microscopy applications. Together with its nanosizing capability, this may eventually be used to analyse macromolecular complexes and other nanostructures with a topological resolution, further narrowing the gap to Cryoelectron microscopy. This article is part of the Theo Murphy meeting issue ‘Super-resolution structured illumination microscopy (part 2)’.

Near Infrared Fluorescence Imaging of Intraperitoneal Ovarian Tumors in Mice Using Erythrocyte-Derived Optical Nanoparticles and Spatially-Modulated Illumination.

Simple SummaryOvarian cancer has a greater mortality rate than all gynecological malignancies combined. While cytoreductive surgery remains the primary therapeutic approach, its success is limited by the inability to visualize all tumor nodules for resection. We developed light activated nano-sized particles derived from red blood cells as potential imaging probes for near infrared fluorescence imaging of tumors during cytoreductive surgery. We present the first demonstration of the use of these nanoparticles in conjunction a spatially-modulated illumination (SMI) modality to image ovarian intraperitoneal tumors in mice. Our findings indicate that, at 24 h post-administration, these nanoparticles accumulated at higher levels in tumors as compared to organs, and that use of SMI enhances the image contrast.Ovarian cancer is the deadliest gynecological cancer. Cytoreductive surgery to remove primary and intraperitoneal tumor deposits remains as the standard therapeutic approach. However, lack of an intraoperative image-guided approach to enable the visualization of all tumors can result in incomplete cytoreduction and recurrence. We engineered nano-sized particles derived from erythrocytes that encapsulate the near infrared (NIR) fluorochrome, indocyanine green, as potential imaging probes for tumor visualization during cytoreductive surgery. Herein, we present the first demonstration of the use of these nanoparticles in conjunction with spatially-modulated illumination (SMI), at spatial frequencies in the range of 0–0.5 mm−1, to fluorescently image intraperitoneal ovarian tumors in mice. Results of our animal studies suggest that the nanoparticles accumulated at higher levels within tumors 24 h post-intraperitoneal injection as compared to various other organs. We demonstrate that, under the imaging specifications reported here, use of these nanoparticles in conjunction with SMI enhances the fluorescence image contrast between intraperitoneal tumors and liver, and between intraperitoneal tumors and spleen by nearly 2.1, and 3.0 times, respectively, at the spatial frequency of 0.2 mm−1 as compared to the contrast values at spatially-uniform (non-modulated) illumination. These results suggest that the combination of erythrocyte-derived NIR nanoparticles and structured illumination provides a promising approach for intraoperative fluorescence imaging of ovarian tumor nodules at enhanced contrast.

Measurement of replication structures at the nanometer scale using super-resolution light microscopy

DNA replication, similar to other cellular processes, occurs within dynamic macromolecular structures. Any comprehensive understanding ultimately requires quantitative data to establish and test models of genome duplication. We used two different super-resolution light microscopy techniques to directly measure and compare the size and numbers of replication foci in mammalian cells. This analysis showed that replication foci vary in size from 210 nm down to 40 nm. Remarkably, spatially modulated illumination (SMI) and 3D-structured illumination microscopy (3D-SIM) both showed an average size of 125 nm that was conserved throughout S-phase and independent of the labeling method, suggesting a basic unit of genome duplication. Interestingly, the improved optical 3D resolution identified 3- to 5-fold more distinct replication foci than previously reported. These results show that optical nanoscopy techniques enable accurate measurements of cellular structures at a level previously achieved only by electron microscopy and highlight the possibility of high-throughput, multispectral 3D analyses.

SPDM: light microscopy with single-molecule resolution at the nanoscale

Far-field fluorescence techniques based on the precise determination of object positions have the potential to circumvent the optical resolution limit of direct imaging given by diffraction theory. In order to use localization to obtain structural information far below the diffraction limit, the ‘point-like’ components of the structure have to be detected independently, even if their distance is lower than the conventional optical resolution limit. This goal can be achieved by exploiting various photo-physical properties of the fluorescence labeling (‘spectral signatures’). In first experiments, spectral precision distance microscopy/spectral position determination microscopy (SPDM) was limited to a relatively small number of components to be resolved within the observation volume. Recently, the introduction of photoconvertable molecules has dramatically increased the number of components which can be independently localized. Here, we present an extension of the SPDM concept, exploiting the novel spectral signature offered by reversible photobleaching of fluorescent proteins. In combination with spatially modulated illumination (SMI) microscopy, at the present stage, we have achieved an estimated effective optical resolution of approximately 20 nm in the lateral and 50 nm in the axial direction, or about 1/25th–1/10th of the exciting wavelength.

High-precision structural analysis of subnuclear complexes in fixed and live cells via spatially modulated illumination (SMI) microscopy

Spatially modulated illumination (SMI) microscopy is a method of wide field fluorescence microscopy featuring interferometric illumination, which delivers structural information about nanoscale architecture in fluorescently labelled cells. The first prototype of the SMI microscope proved its applicability to a wide range of biological questions. For the SMI live cell imaging this system was enhanced in terms of the development of a completely new upright configuration. This so called Vertico-SMI transfers the advantages of SMI nanoscaling to vital biological systems, and is shown to work consistently at different temperatures using both oil- and water-immersion objective lenses. Furthermore, we increased the speed of data acquisition to minimize errors in the detection signal resulting from cellular or object movement. By performing accurate characterization, the present Vertico-SMI now offers a fully-fledged microscope enabling a complete three-dimensional (3D) SMI data stack to be acquired in less than 2 seconds. We have performed live cell measurements of a tet-operator repeat insert in U2OS cells, which provided the first in vivo signatures of subnuclear complexes. Furthermore, we have successfully implemented an optional optical configuration allowing the generation of high-resolution localization microscopy images of a nuclear pore complex distribution.

Nanostructure analysis using spatially modulated illumination microscopy

We describe the usage of the spatially modulated illumination (SMI) microscope to estimate the sizes (and/or positions) of fluorescently labeled cellular nanostructures, including a brief introduction to the instrument and its handling. The principle setup of the SMI microscope will be introduced to explain the measures necessary for a successful nanostructure analysis, before the steps for sample preparation, data acquisition and evaluation are given. The protocol starts with cells already attached to the cover glass. The protocol and duration outlined here are typical for fixed specimens; however, considerably faster data acquisition and in vivo measurements are possible.

Spatially modulated illumination microscopy using one objective lens

The spatially modulated illumination (SMI) microscope is a wide-field fluorescence microscope featuring axially structured illumination, through which access to information about subresolution object structures is obtained. We present a simplified setup where the interference pattern is generated by reflecting the laser beam with a mirror. We characterize our setup by presenting measurements on fluorescent microspheres with diameters ranging from 44 to 200 nm. The results agree well with the sizes provided by the manufacturer. Furthermore, the spheres are analyzed with 458-, 514-, 488-, and 568-nm excitation wavelengths, giving good agreement of the sizes determined at the respective wavelengths. A measurement of the same objects using different excitation wavelengths leads to a size difference of a few nanometers only. The potential of SMI microscopy for the fast analysis of many fluorescent objects is also addressed. In addition, the applicability to biological specimens is shown on fluorescently labeled, specific chromatin domains. The results obtained using the presented mirror geometry agree well with data obtained using a standard SMI microscope setup.

Nanostructure of specific chromatin regions and nuclear complexes

Spatially modulated illumination (SMI) microscopy is a method of widefield fluorescence microscopy featuring interferometric illumination, which delivers structural information about nanoscale features in fluorescently labeled cells. Using this approach, structural changes in the context of gene activation and chromatin remodeling may be revealed. In this paper we present the application of SMI microscopy to size measurements of the 7q22 gene region, giving us a size estimate of 105+/-16 nm which corresponds to an average compaction ratio of 1:324. The results for the 7q22 domain are compared with the previously measured sizes of other fluorescently labeled gene regions, and to those obtained for transcription factories. The absence of a correlation between the measured and genomic sizes of the various gene regions indicate that a high variability in chromatin folding is present, with factors other than the sequence length contributing to the chromatin compaction. Measurements of the 7q22 region in different preparations and at different excitation wavelengths show a good agreement, thus demonstrating that the technique is robust when applied to biological samples.

Transillumination spatially modulated illumination microscopy

The diagnostic utility of a conventional transillumination microscope, the most common imaging modality in clinical use today, is limited by the microscope's resolution. It is, however, possible to achieve lateral resolution well beyond the classical limit by using laterally structured illumination in a wide-field, nonconfocal microscope. In this method, the spatially modulated illumination (SMI) makes high-resolution information that is normally inaccessible visible in the observed image. Previously presented SMI microscopy systems operated in epifluorescence mode. We describe the design, construction, and testing of a novel transillumination SMI microscope. As transillumination is necessary for most medical applications, such as histopathologic evaluation of biopsy tissue and chromosomal analysis, such a system should have a significant diagnostic effect.

Beyond nanosizing: an approach to shape analysis of fluorescent nanostructures by SMI-microscopy

Using spatially modulated illumination (SMI) light microscopy it is possible to measure the sizes of fluorescent structures that have an extension far below the conventional optical resolution limit (“subresolution size”). Presently, the sizes are determined as the object extension along the optical axis of the SMI microscope. For this, however, “a priori” assumptions on the fluorochrome distribution (“shape”) within the examined fluorescent structure have to be made. Usually it is assumed that the fluorochrome follows a Gauss-distribution or a spherical distribution. In this report we overcome the necessity to make an assumption on the shape of the fluorochrome distribution. We introduce two new experimentally obtained parameters which allow the determination of a shape measure to describe the spatial distribution of the fluorescent dye. This becomes possible by independent measurements with different excitation wavelengths. As an example, we present shape parameter measurements on individual fluorescent microspheres with a nominal geometrical diameter (“size”) of 190 nm. In the case investigated, the experimental shape correlated well with a homogeneous fluorochrome distribution (“spherical shape”) but not with a variety of other “shapes”.

High-precision SMI microscopy size measurements by simultaneous frequency domain reconstruction of the axial point spread function

An improved size measurement method using spatially modulated illumination (SMI) microscopy enhances subwavelength size determination of fluorescent objects. In this new approach the point spread function of the SMI microscope is reconstructed in each measurement. For this, reference objects with known dye distribution have to be put additionally to the unknown objects on the object slide or on the cover slip. We present data from measurements on fluorescent microspheres with diameters of 140 and 200 nm using an excitation wavelength of 488 nm.

Superresolution size determination in fluorescence microscopy: A comparison between spatially modulated illumination and confocal laser scanning microscopy

Recently developed far field light optical methods are a powerful tool to analyze biological nanostructures and their dynamics, in particular including the interior of three-dimensionally conserved cells. In this article, the recently described method of spatially modulated illumination (SMI) microscopy has been further extended to the online determination of the extension of small, subwavelength sized, fluorescent objects (nanosizing). Using fluorescence excitation with 488 nm, the determination of fluorescent labeled object diameters down to 40 nm corresponding to about 1/12th of the wavelength used for one-photon excitation could be shown. The results of the SMI nanosizing procedure for a detailed, systematic variation of the object diameter are presented together with a fast algorithm for online size evaluation. In addition, we show a direct comparison of the diameter of “colocalization volumes” between SMI nanosizing and conventional confocal laser scanning microscopy.

Nanostructure Analysis Using Spatially Modulated Illumination Microscopy

For an improved understanding of cellular processes, it is highly desirable to develop light optical methods for the analysis of biological nanostructures and their dynamics in the interior of three-dimensionally (3D) conserved cells. Here, important structural parameters to be considered are the topology, i.e. the mutual positions and distances, as well as the sizes of the constituting subunits. This has become possible by the development of a novel method of far-field light fluorescence microscopy, spatially modulated illumination (SMI) microscopy. Using this approach, axial distances between fluorescence-labeled targets can be measured with an accuracy close to 1 nm; their sizes can be determined down to a few tens of nanometers. This approach can be extended to the determination of 3D positions and mutual 3D distances and sizes of any number of small objects/subunits that can be discriminated due to their spectral signatures. Consequently, the new approach allows an ‘in situ nanostructure elucidation, until now regarded to be beyond the possibilities of far-field light microscopy. Application examples discussed are: colocalization/nanosizing and topological analysis of large protein-protein complexes, of nucleic acid-protein complexes (such as transcription factories), or of the highly complex DNA-protein nanostructures of which active/ inactive gene regions in the eukaryotic cell nucleus are constituted.

Nanosizing of fluorescent objects by spatially modulated illumination microscopy.

A new approach to measuring the sizes of small fluorescent objects by use of spatially modulated illumination (SMI) far-field light microscopy is presented. This method is based on SME measurements combined with a new SMI virtual microscopy (VIM) data analysis calibration algorithm. Here, experimental SMI measurements of fluorescent objects with known diameter (size) were made. From the SMI data obtained, the size was determined in an independent way by use of the SMI VIM algorithm. The results showed that with SMI microscopy in combination with SMI VIM calibration, subwavelength object size measurements as small as 40 nm are experimentally feasible with high accuracy.

Subwavelength size determination by spatially modulated illumination virtual microscopy

A new approach for determining the sizes of individual, small fluorescent objects with diameters considerably below the optical resolution limit is described in which spatially modulated illumination (SMI) microscopy and 360-647-nm excitation wavelengths are used. The results of SMI virtual microscopy computer simulations indicate that, in this wavelength range, reliable measurements of sizes as small as approximately 20 nm are feasible if the low numbers of fluorescence photons that are usually detected from such small objects are taken into account. This method is based on the well-known fact that the modulation of the diffraction image in a SMI microscope is disturbed by the size of the object. Using appropriately calculated calibration functions, one can use this disturbance of the modulation to determine the size of the original object.

Spatially modulated illumination microscopy: online visualization of intensity distribution and prediction of nanometer precision of axial distance measurements by computer simulations.

During the last years, measurements considerably beyond the conventional "Abbe-Limit" of optical resolution in far field light microscopy were realized by several light microscopical approaches. Point spread function (PSF) engineering, spectral precision distance microscopy (SPDM), and related methods were used to demonstrate the feasibility of such measurements. SPDM allows the measurement of position and multiple distances between point-like fluorescent objects of different spectral signatures far below the optical resolution criterion as defined by the full width at half maximum of the PSF. Here, we report a software method to obtain online visualization of light distribution in the lateral and axial direction of any object detected in a spatially modulated illumination (SMI) microscope. This strongly facilitates routine application of SMI microscopy. The software was developed using Microsoft Visual C++ running on Windows NT. Furthermore, some aspects of the theoretical limits of the SPDM method were studied by virtual microscopy. For the case of SMI microscopy the precision of axial distance measurements was studied, taking into account photon statistics and image analysis procedures. The results indicate that even under low fluorescence intensity conditions typical for biological structure research, precise distance measurements in the nanometer range can be determined, and that axial distances in the order of 40 nm are detectable with such precision.