Spatial Distribution Of Electron Density Research Articles

Efficient computational modeling of electronic stopping power of organic polymers for proton therapy optimization

This comprehensive study delves into the intricate interplay between protons and organic polymers, offering insights into proton therapy in cancer treatment. Focusing on the influence of the spatial electron density distribution on stopping power estimates, we employed real-time time-dependent density functional theory coupled with the Penn method. Surprisingly, the assumption of electron density homogeneity in polymers is fundamentally flawed, resulting in an overestimation of stopping power values at energies below 2 MeV. Moreover, the Bragg rule application in specific compounds exhibited significant deviations from experimental data around the stopping maximum, challenging established norms.

An incoherent Thomson scattering system for measurements near plasma boundaries.

Laser Thomson scattering (LTS) is a minimally invasive measurement technique used for determining electron properties in plasma systems. Sheath model closure validation requires minimally invasive measurements of the electron properties that traverse the boundaries between the bulk plasma, the presheath, and the plasma sheath. Several studies have probed the radial properties along the surface of discharge electrodes with laser-based diagnostics and electrostatic probes. These measurements provide valuable insight into the electron properties in this dynamic region. However, sheath model calibration requires plasma property measurements perpendicular to plasma bounding surfaces, in this case, along the electrode normal vector between discharge electrodes. This work presents the development of a discharge plasma cell and laser Thomson scattering system with a measurement volume step of 1mm normal to plasma bounding surfaces. The laser Thomson scattering measurements are made between a set of discharge electrodes separated by ∼25mm that are used to generate a pulsed argon plasma. The spatial distribution of electron temperature and density is measured at several discharge voltages between 8 and 20kV at a pressure of 8 Torr-Ar. It is determined that the system is statistically stationary and resembles a classic DC discharge plasma. The results are some of the first laser diagnostic-based "between electrode" measurements made along the plasma bounding electrode normal vector. A one-dimensional sheath model is applied to determine the near cathode electron properties, and it is determined that the edge of the presheath is probed in the high-voltage cases. As the lengths of the presheath and sheath decrease with decreasing voltage, the region recedes below the closest probed point to the cathode. To improve the performance of the diagnostic, the step size of the interrogation volume should decrease by an order of magnitude from 1mm to less than 100 μm, and the data acquisition strategy should be revised to increase the signal-to-noise ratio.

Predicting the solubility of gases, vapors, and supercritical fluids in amorphous polymers from electron density using convolutional neural networks

A twin convolutional neural network is proposed to predict the pressure and temperature-dependent sorption of gases, vapors, and supercritical fluids in amorphous polymers, using spatial electron density distribution.

Theoretical Study of Raman Intensities of p-Nitroaniline in Different Solvent Conditions by Using a Reference Interaction Site Model Self-Consistent Field Explicitly Including Constrained Spatial Electron Density Distribution.

Raman spectroscopy is one of the most powerful tools to understand and characterize the states and structures of systems in several environments. To obtain highly accurate changes in Raman intensities of systems in solution, theoretical treatment, which can deal with not only the states and structures of systems but also the environment around molecules, proves to be significant. Hence, in this study, we developed the calculation of changes in Raman intensities of systems in different solvent conditions by using the reference interaction site model self-consistent field study explicitly including constrained spatial electron density distribution; this model is designed based on elements from both quantum mechanics and statistical mechanics. We showed that our calculation method could reproduce the changes in Raman intensities of p-nitroaniline (pNA) under different solvent conditions, including supercritical water, which has been observed in previous experimental studies. Based on the analysis of the calculation results, we observed that the ratio of the Raman intensity change of pNA in different solvent conditions is strongly correlated with the charge-transfer character of pNA.

Emission spectroscopy diagnosis and discharge characteristics distribution analysis of high-frequency, high-enthalpy inductive coupling plasma generator

To study the electromagnetic properties through reentry plasma on ground, a large-sized inductive coupled plasma generator is designed to produce a long-duration, large size and high temperature plasma flow in a low-pressure vacuum tank. Among all plasma parameters, the spatial distribution of electron density and electron temperature is of utmost importance for analyzing the electromagnetic scattering properties. In this study, we used the emission spectroscopy diagnosis method to explore the aforementioned parameters at two locations: upflow and downflow of the discharge coil in the plasma generator. Experiments were conducted under various discharge conditions for argon, with the panel power ranging from 28 kW to 85 kW. The results showed that, at the upflow of the discharge coil, the electron temperature at the center was higher than that at the edge, exhibiting an arch-shaped profile. However, at the downflow of the discharge coil, the electron temperature at the center was lower than that at the edge, exhibiting a saddle-shaped profile. The electron density exhibited a completely opposite distribution compared to the electron temperature, with higher values at the edge for upflow and higher values at the center for downflow. By varying the panel power, we observed the similar phenomenon: the electron temperature decreased, while the electron density increased with the increase in power. Finally, brief analysis was provided at the end of the paper. This study offered valuable insights into the transition of plasma distribution in a plasma generator, providing a reference for future research on the propagation of electromagnetic waves in plasma sheaths.

Description of Solvatochromism of Peak Broadening in Absorption Spectra in Solution Using the Reference Interaction Site Model Self-Consistent Fields Spatial Electron Density Distribution.

We quantified and subsequently analyzed bandwidth of ultraviolet and visible photoabsorption spectral lines in solution by applying time-dependent first-order perturbation theory using the Born-Oppenheimer adiabatic potential calculated using the multistate extended-multi-configurational quasi-degenerated second-order perturbation theory (MS-XMCQDPT2) coupled with the reference interaction site model self-consistent field spatial electron density distribution (RISM-SCF-cSED). The proposed method was implemented for 2-thiocytosine in solution, and solvatochromism of the bandwidth of the πSπ* transition was clearly observed. The standard deviation of a characteristic electronic excitation was decomposed into the contributions of the characteristic vibrational mode of 2-thiocytosine. The main vibrational modes contributing to peak broadening were found to be for acetonitrile, methanol, and the aqueous phase. We concluded that the mechanism for peak broadening is qualitatively different for phases of protic and aprotic solvents because of the structural variation in 2-thiocytosine driven by the breakage of the resonance structures.

Chemical bonding properties of liquid methane under high-density conditions

We present the chemical bonding and electronic properties of liquid methane at temperatures from 2000 to 4000 K and high densities of up to 3.0 g/cm3, calculated using ab initio molecular dynamics simulations in combination with the Mulliken population analysis. Bond-overlap populations and pair distribution functions are studied to investigate the evolution of electron delocalization accompanying atomic structure change as the density is increased. In addition, we also investigated the bandgap energy, electronic density of states, and spatial distribution of electron density. We observed that molecular hydrogen and C‒C bonds are formed after methane dissociates, and then the system undergoes a nonmetal–metal transition coinciding with hydrogen being transformed from the molecular to the atomic state. The C‒C bonds in the system retain covalent character, even at the highest density of 3.0 g/cm3.

Numerical simulation of the argon dielectric barrier discharge driven by dual frequency at atmospheric pressure

Argon dielectric barrier discharge driven by the dual frequency at atmospheric pressure has been investigated by a 1D fluid model. Temporal evolutions of voltage and charge density on dielectric surface, fluxes of electrons and ions on the surface, the spatiotemporal distribution of electron generation rate, and the spatial distribution of electron density are studied with various low-frequency (LF) voltages. Minimum sustained discharge amplitude of high frequency (HF) voltage and spatiotemporal mean electron density over one LF period varying with sheath voltage (α → γ) are also discussed. Results show that in α mode, the electron flux on the dielectric surface decreases significantly when the LF voltage amplitude is lower while the ion flux is less affected. The positive charge density on the surface increases, causing the surface voltage waveform to shift upward. When the LF voltage amplitude is 40 V and that of HF voltage is 87 V, the positive and negative values of voltage amplitude of dielectric surface are 182 and 32 V. As the LF voltage amplitude increases further, the sheath formation time is significantly delayed and the discharge terminates, and the rate of electron generation decreases significantly. The discharge is extinguished when the amplitude of LF voltage is 68 V while it regains when the amplitude reaches up to 750 V. In γ mode, when the amplitude of HF voltage reaches or exceeds its minimum sustained discharge value, the generation and distribution of electrons are almost unaffected by the amplitude of LF voltage.

Ab initio study of the piezoelectric effects of the 2D semiconductors of IV group monochalcogenides (GeSe, GeS)

In this article, the piezoelectric effects of the 2D semiconductors of IV group monochalcogenides (GeS, GeSe) are studied by methods of the density functional theory and first-principles pseudopotential based on own program code. The spatial distribution of valence electron density, density of states, and Coulomb potential along transverse direction are calculated. It was found that a more significant rearrangement of the electron density was observed during compression of both GeS and GeSe bi-layer films than mono-layer films, but more significant in GeS films.

Hot Ion Mode in the Globus-M2 Spherical Tokamak

NBI-assisted plasma heating with one or two injectors of fast neutral atoms was studied at the Globus-M2 spherical tokamak at the toroidal magnetic fields of 0.8–0.9 T and plasma currents of 0.35–0.4 MA. Measurements of the spatial temperature and electron density distributions, performed using the Thomson scattering diagnostics, showed a twofold increase in heating of plasma electrons during the injection of neutral particles with energies of up to 45 keV at the beam power of 0.75 MW, as compared to the ohmic heating regime. Switching on the second additional beam with the particle energy of up to 30 keV and power of up to 0.5 MW resulted in obtaining the hot ion mode in the range of mean plasma densities of (1.6–10) × 1019 m−3. According to the data of active spectroscopy and neutral particle analyzer diagnostics, in the hot zone, the ion temperature reached 4 keV at the plasma density of 8 × 1019 m−3, which is more than 2.5 times higher than the electron temperature.

Two-dimensional particle-in-cell simulation of electron heating effect in multiple hollow cathode trenches with curved boundary

A particle-in-cell simulation is suitable for simulating capacitively coupled plasma devices because it calculates the trajectory of particles with arbitrary energy distributions and has the advantage of analyzing sheath dynamics precisely. Implementing the ghost grid method in the Poisson solver makes it possible to simulate a curved structure in the structured grids. The electron transport and heating mechanism are determined according to the two-dimensional (2D) sheath dynamics. The hollow cathode effect on electron transport was analyzed by varying the hole shape and gas pressure. The spatial distributions of electron density and temperature are influenced by the energy relaxation length of electrons, which is affected by the energy distribution function and gas pressure. As a result, a new electron heating mode appears in the 2D structure.

Real-time monitoring of the plasma density distribution in low-pressure plasmas using a flat-cutoff array sensor

In the industrial semiconductor plasma processing, plasma density and its spatial distribution are critical for the understanding of discharge physics and the enhancement of the processing yield via monitoring of the status of plasma processing. Thus, real-time monitoring of plasma density and uniformity in the wafer region during wafer processing have been receiving significant attention. In this study, we developed an electrode-embedded flat-cutoff array sensor for the real-time measurement of electron density uniformity during wafer processing. We measured the spatial distribution of electron density on the wafer surface, compared it with the results measured in the bulk plasma region, and found different plasma distributions between the two where this difference can be attributed to local electron kinetics. We also performed plasma etching of amorphous carbon materials, which showed a clear correlation with the electron density distribution measured by the flat-cutoff array sensor. This indicates that the electron density distribution on the wafer surface is crucial for the process result. Thus, the array sensor developed in this study can be applied not only to measure plasma uniformity but also to predict the wafer process beforehand, making it highly significant for industrial plasma processing methods, such as virtual metrology.

Bringing ultimate depth to scanning tunnelling microscopy: deep subsurface vision of buried nano-objects in metals.

A method for subsurface visualization and characterization of hidden subsurface nano-structures based on scanning tunelling microscopy/spectroscopy (STM/STS) has been developed. Nano-objects buried under a metal surface up to several tens of nanometers can be visualized through the metal surface and characterized with STM without destroying the sample. This non-destructive method exploits quantum well (QW) states formed by partial electron confinement between the surface and buried nano-objects. The specificity of STM allows for nano-objects to be singled out and easily accessed. Their burial depth can be determined by analysing the oscillatory behaviour of the electron density at the surface of the sample, while the spatial distribution of electron density can give additional information about their size and shape. The proof of concept was demonstrated with different materials such as Cu, Fe, and W in which the nanoclusters of Ar, H, Fe and Co were buried. For each material, the maximal depth of subsurface visualisation is determined by the material parameters and ranges from several nanometers to several tens of nanometers. To demonstrate the ultimate depth of subsurface STM-vision as the principal limit of our approach, the system of Ar nanoclusters embedded into a single-crystalline Cu(110) matrix has been chosen since it represents the best combination of the mean free path, smooth interface and inner electron focusing. With this system we experimentally demonstrated that Ar nanoclusters of several nanometers large buried as deep as 80 nm can still be detected, characterized and imaged. The ultimate depth of this ability is estimated to be 110 nm. This approach using QW states paves the way for enhanced 3D characterization of nanostructures hidden well below a metallic surface.

Reference interaction site model self-consistent field with constrained spatial electron density approach for nuclear magnetic shielding in solution.

We propose a new hybrid approach combining quantum chemistry and statistical mechanics of liquids for calculating the nuclear magnetic resonance (NMR) chemical shifts of solvated molecules. Based on the reference interaction site model self-consistent field with constrained spatial electron density distribution (RISM-SCF-cSED) method, the electronic structure of molecules in solution is obtained, and the expression for the nuclear magnetic shielding tensor is derived as the second-order derivative of the Helmholtz energy of the solution system. We implemented a method for calculating chemical shifts and applied it to an adenine molecule in water, where hydrogen bonding plays a crucial role in electronic and solvation structures. We also performed the calculations of 17O chemical shifts, which showed remarkable solvent dependence. While converged results could not be sometimes obtained using the conventional method, in the present framework with RISM-SCF-cSED, an adequate representation of electron density is guaranteed, making it possible to obtain an NMR shielding constant stably. This introduction of cSED is key to extending the method's applicability to obtain the chemical shift of various chemical species. The present demonstration illustrates our approach's superiority in terms of numerical robustness and accuracy.

Systematic Ionospheric Residual Errors in GNSS Radio Occultation: Theory for Spherically Stratified Media

AbstractThe standard ionospheric correction of bending angles in Global Navigation Satellite System (GNSS) radio occultation (RO) measurements removes most of the influence from the ionosphere, but leaves small systematic residual errors in the corrected data. The main reasons for residual errors at stratospheric and mesospheric altitudes are the neglect of higher‐order terms in the expansion of the ionospheric refractive index, and the fact that the two GNSS signals follow slightly different paths through the ionosphere. Another reason is the neglect of the local electron density at the receiver in orbit. These residual errors depend on the geomagnetic field and the spatial distribution of the ionospheric electron density and its gradients. In this work we derive this dependency to high accuracy for a spherically stratified ionosphere, including the “bi‐local” situation where the ionosphere is different (though still spherically stratified) on the inbound and outbound side of the RO event tangent points. As part of the derivations, we find a small residual error term not previously noted, which can become appreciable for elliptical satellite orbits. The results are verified by ray tracing through simple ionospheric and geomagnetic field models. The accuracy of a higher‐order bi‐local ionospheric residual error correction based on these results would be limited by the uncertainty in knowledge of the electron density and by horizontal electron density gradients along the ray paths.

Spin-Orbit Coupling Calculation Combined with the Reference Interaction Site Model Self-Consistent Field Explicitly Including Constrained Spatial Electron Density Distribution.

Studying the radiative and non-radiative decay processes of molecules in a solution is an important issue in the design of organic and functional molecules. Theoretical approaches have great potential for revealing this decay process through computation of various parameters, such as the energy surfaces at the excited state and spin-orbit coupling (SOC). The development of quantum chemical programs has enabled the calculation of SOC values to become popular for the gas phase. However, SOC calculations in solution have some difficulties that need to be overcome. In the present study, the authors combined the SOC calculations with the reference interaction site model self-consistent field explicitly including constrained spatial electron density distribution. To validate the reliability of our method, the decay process of dimethylaminobenzonitrile in cyclohexane and acetonitrile was studied. By computing the SOC values in both solution systems, the authors were able to investigate the decay process at the atomistic level. Furthermore, a natural transition orbital analysis and the measurement of the decomposed SOC values were found to provide a clear understanding of intersystem crossing.

Dynamics of implosion phase of modified plasma focus studied via laser interferometry and electrical measurements

Dynamics of the implosion of the dense plasma focus play an essential role in converting electrical energy into the kinetic energy of the current sheath and subsequent production of accelerated electrons, ions, hard X-ray, and neutron emission. This paper presents the analysis of the implosion parameters, such as the implosion velocity and imploding mass, coupled with electrical parameters observed on the PF-1000 facility with a modified electrode system. The first two parameters are based on the 16-frame Mach–Zehnder interferometer, which provides the spatial distribution of electron density in a time sequence. Measurement of the total current, current derivative, and voltage enables us to evaluate the total inductance and kinetic energy driven by the capacitor bank. Then comparing the inductances and kinetic energies evaluated from the interferograms and electrical waveforms can provide more precise information on the current flowing in the imploding sheath. We present a possible way to deal with the fact that only part of the total current flows through the imploding layer. With the supposition that the rest of the current flows close to the insulator, we conclude that roughly 70% of the total current flows through the pinch, which is in good agreement with an input parameter of the Lee model, for example.

Multipolar Atom Types from Theory and Statistical Clustering (MATTS) Data Bank: Impact of Surrounding Atoms on Electron Density from Cluster Analysis.

The multipole model (MM) uses an aspherical approach to describe electron density and can be used to interpret data from X-ray diffraction in a more accurate manner than using the spherical approximation. The MATTS (multipolar atom types from theory and statistical clustering) data bank gathers MM parameters specific for atom types in proteins, nucleic acids, and organic molecules. However, it was not fully understood how the electron density of particular atoms responds to their surroundings and which factors describe the electron density in molecules within the MM. In this work, by applying clustering using descriptors available in the MATTS data bank, that is, topology and multipole parameters, we found the topology features with the biggest impact on the multipole parameters: the element of the central atom, the number of first neighbors, and planarity of the group. The similarities in the spatial distribution of electron density between and within atom type classes revealed distinct and unique atom types. The quality of existing types can be improved by adding better parametrization, definitions, and local coordinate systems. Future development of the MATTS data bank should lead to a wider range of atom types necessary to construct the electron density of any molecule.

Role of lone-pair electron localization in temperature-induced phase transitions in mimetite.

The crystal structure of mimetite Pb5(AsO4)3Cl, a phosphate with apatite structure-type has been investigated in situ at 123, 173, 273, 288, 353 and 393 K. A careful inspection of the diffraction pattern and subsequent structure refinements indicated that mimetite transforms from the monoclinic to the hexagonal polymorph with increasing temperature. At 123 K, a monoclinic superstructure, mimetite-2M, with cell parameters a = 20.4487 (9), b = 7.4362 (2), c = 20.4513 (9) Å, β = 119.953 (6)°, V = 2694.5 (2) Å3 and space group P21 was observed. From 173 to 353 K, the reflections of the supercell were evident only along one direction of the corresponding hexagonal apatite-cell and the structure transforms to the polymorph mimetite-M with space group P21/b and unit-cell parameters a = 10.2378 (3), b = 20.4573 (7), c = 7.4457 (2) Å, β = 120.039 (5)°, V = 1349.96 (9) Å3. Only at higher temperature, i.e. 393 K, does mimetite adopt the hexagonal space group P63/m characteristic of apatite structure-types. The role of the electron lone pairs of Pb atoms in the phase transition was investigated through the analysis of the electron localization function (ELF) calculated based on the DFT-geometry optimized structures of the three polymorphs. The changes in spatial distribution of the 6s2 electron density during the phase transitions were explored by means of the Wannier Function Centres (WFCs) derived from ab initio molecular dynamics trajectories. In the high-temperature hexagonal structure the 6s2 electrons are spherically symmetric relative to the position of Pb atoms. At low temperature the maximum of 6s2 electron density is displaced relative to the position of Pb atom contributing to the polar interaction in the monoclinic polymorphs.

Recent progress on the J-TEXT three-wave polarimeter-interferometer

The J-TEXT three-wave polarimeter-interferometer system (POLARIS), which measures time-space distribution of electron density and current density, has been optimized with both the optical system and the equilibrium reconstruction method. The phase resolution of a Faraday rotation angle has been improved from 0.1 to 0.06 degree in chords from –0.18 to 0.18 m (plasma minor radius), and the sawtooth oscillation behavior has been detected by Faraday rotation angle measurement. By combining the POLARIS measured data and the equilibrium and fitting code (EFIT), an upgraded equilibrium reconstruction method has been developed, which provides a more accurate temporal and spatial distribution of current density and electron density. By means of the optimized POLARIS and improved equilibrium reconstruction, variations of profiles with increasing density have been carried out, under both Ohmic and electron cyclotron resonance heating discharges.