Space-vector Hysteresis Current Control Research Articles

New Space-vector hysteresis current control with neutral point voltage balancing applied on three-level VSI for wind power conversion

This paper presents a new space-vector hysteresis current control (SV-HCC) with neutral point voltage balancing applied on a three-level NPC-VSI. The last supplies a rotor winding of the doubly fed induction generator (DFIG). The proposed control technique controls the power delivered from the wind generator to the electrical network by controlling the rotor currents of the DFIG. It is based firstly on the detection of area and sector in which the error vector tip of the rotor current can be located, secondly, on the neutral voltage sensing. And then on the application of an appropriate voltage vector among the 27 voltage vectors of the three-level NPC-VSI to accomplish two main goals: 1- Controlling the active and reactive powers delivered by the wind generator to the electrical network. 2- Balancing the neutral point voltage of the three-level VSI.

Adaptive Space-Vector Hysteresis-Based Control with Constant Switching-Frequency for Three-Level Shunt Active Power Filters

This paper proposes a new constant-frequency space-vector hysteresis current control (CF-SVHCC) technique for three-level neutral-point diode-clamped (TL-NPC) inverters in shunt active power filter applications when applied to three-phase isolated neutral point (INP) systems. The proposed techniques is developed based on two recognized modulation methods, space-vector pulsewidth modulation and adaptive hysteresis-band current control. The proposed technique consists of two alternating adaptive hysteresis-band strategies around the error-current vector in the $$\alpha \beta $$ stationary reference frame (SRF). The first strategy is designed with the purpose of utilizing the medium- and large-voltage vectors of the TL-NPC inverter to keep the error-current vector within the adaptive hysteresis boundary, while the second one is designed according to the small-voltage vectors of the TL-NPC inverter to balance its neutral point voltage. The main part of this proposed technique is a supervisory controller that operates in SRF to effectively avoid inter-phase dependency. This smart controller systematically uses the zero-voltage vectors and the nonzero-voltage vectors associated with the alternating adaptive hysteresis-band strategies in order to prevent high switching frequency and maintain the switching frequency constant in INP systems, respectively. The proposed CF-SVHCC performance is validated by extensive simulation studies for both steady-state and transient conditions.

FPGA-Based Fault-Tolerant Space Vector-Hysteresis Current Control for Three-Phase Grid-Connected Converter

This paper investigates the field-programmable gate array (FPGA) implementation of a fault-tolerant space vector-hysteresis current control (SV-HCC) for three-phase grid-connected converter. The proposed control ensures continuous operation despite of an open-circuit fault in one grid current measurement circuit (caused by defected cables, lines or connectors at the output of the current measurement circuit). It is based on hardware redundancy of current measurement circuits for fault detection and isolation. The faulty measured current is identified through the computation of residuals with well-defined thresholds. Thanks to the high computation capabilities of FPGAs, the implemented fault-tolerant SV-HCC is executed with a very high sampling frequency and very low execution time. As a consequence, the defined theoretical thresholds remain available for the experimental tests. Several experimental results, carried out on FPGA-based prototyping platform, are given in order to illustrate effectiveness and reliability of the proposed fault-tolerant SV-HCC.

Vector selection approach‐based hexagonal hysteresis space vector current controller for a three phase diode clamped MLI with capacitor voltage balancing

The purpose of this study is to provide a broad idea about current control scheme and equilibrating voltages in DC-link capacitors of the neutral-point clamped multilevel inverter (NPC-MLI), using an innovative hexagonal space vector hysteresis current control (SVHCC) scheme. The main ideology is to force the literal current vector to reach the reference current vector through an appropriate voltage vector selection sequence. This proposed scheme defines two hexagonal hysteresis bands encompassing the error vector, as a first step. With respect to the error vector location, the selection of the adjacent vector is acted to minimise the error vector. In addition to the error vector selection, the capacitor voltage is also equilibrated by controlling the degree of freedom available in selecting the switching vectors. The SVHCC scheme is intelligent in performing modulation depth dependent selection of switching vectors between the groups namely closest three vector and preferred three vector (PTV). This scheme balances the DC-link capacitors’ voltages within a tolerance limit for any value of modulation index. The proposed scheme is asserted through MATLAB/Simulink software. The superiority of the proposed technique is validated through the 2 kW NPC-MLI supported with SPARTAN III 3AN –XC3S400 field programmable gate array.

Back-to-back three-level converter controlled by a novel space-vector hysteresis current control for wind conversion systems

In this paper, a novel space-vector hysteresis current control (SVHCC) is proposed for a back-to-back three-level converter which is used as an electronic interface in a wind conversion system. The proposed SVHCC controls the active and reactive powers delivered to the grid by the doubly fed induction machine (DFIM) through the control of its rotor currents. In addition, it controls the neutral point voltage by using the redundant inverter switching states. The three rotor current errors are gathered into a single space-vector quantity. The magnitude of the error vector is limited within boundary areas of a square shape. The control scheme is based firstly on the detection of the area and sector in which the vector tip of the current error can be located. Then, an appropriate voltage vector among the 27 voltage vectors of the three-level voltage source inverter (VSI) is applied to push the error vector towards the hysteresis boundaries. Simple look-up tables are required for the area and sector detection, and also for vector selection. The performance of the proposed control technique has been verified by simulations.