Space Division Multiple Access Research Articles

Space-code division multiple access for broadband acoustic networks

We present an investigation into the design of an acoustic communication network, where multiple users are distributed across space and transmit and receive simultaneously in the same band to and from a common base station. Specifically, we focus on a system that utilizes orthogonal frequency division multiplexing as a modulation method, and allows users to transmit and receive in either synchronous or asynchronous fashion. To distinguish between users on the uplink, the base station employs a combination of code-division and space-division multiple access. The base station iteratively steers a beam to each stable propagation path of the desired user’s channel while placing nulls in the direction of other paths, as well as in the directions of interfering users. Finally, the multiple paths of the desired user are recombined before data detection. The process is repeated for each user. Broadband beamforming is employed to account for the broadband nature of acoustic signals. The beamformer coefficients on each carrier depend on the angles of signal arrivals, which are estimated during the uplink transmission and used to construct both the uplink and the downlink beamformer. On the downlink, the base station utilizes angle information to assemble beamforming weights and point in the direction of stable paths of the users. It superimposes multiuser signals and transmits the sum signal to the users. The signal intended for a given user reaches only that user, requiring just a simple detector. Each user is equipped by a single-element transducer. To demonstrate the design concepts, we conducted simulations using a shallow water channel model and performed experimental over-the-air tests in an indoor environment using an acoustic communications testbed. The results were excellent, thereby encouraging future implementations in practical systems.

Joint optimal beam forming and resource allocation in intelligent reflecting surface aided wireless power transfer rate splitting multiple access system

SummaryThe intelligent reflecting surface (IRS) has recently become the most promising technology to achieve maximum beam‐forming gain with a simultaneous wireless information and power transfer (SWIPT) system. Many existing studies perform a single IRS deployment or utilize space division multiple access (SDMA) and non‐orthogonal multiple access (NOMA) schemes. However, the existing schemes face high time complexity and block signal transmission for larger indoor communications. Hence, this article introduces a dual IRS‐aided multiuser SWIPT system by implementing rate‐splitting multiple access (RSMA) systems. To enhance the minimum achievable rate and ensure the minimum harvesting energy (HE), this study proposes a joint successive convex approximation with an integrated optimization algorithm (SCA‐IOA). The proposed algorithm jointly optimizes the reflecting beam forming and power splitting (PS) coefficient of all the users effectively. The simulation results demonstrate the effectiveness of the proposed techniques and produce an outstanding performance for deploying dual IRS and implementing RSMA compared to traditional SDMA and NOMA systems.

Channel Estimation and Signal Detection for NLOS Ultraviolet Scattering Communication with Space Division Multiple Access

Channel Estimation and Signal Detection for NLOS Ultraviolet Scattering Communication with Space Division Multiple Access

Joint Beamforming Design in Reconfigurable Intelligent Surface-Assisted Rate Splitting Networks

Reconfigurable Intelligent Surface (RIS) is an emerging technology that can improve the spectrum and energy efficiency of next-generation wireless networks. However, attaining accurate channel state information (CSI) for the cascaded RIS channel is particularly challenging. Imperfect CSI is a major bottleneck to achieving the spectral efficiency benefit of RIS-assisted networks. Rate splitting (RS), a promising multiple access technology, has been shown to be able to achieve an improved spectrum efficiency and be robust to channel uncertainties. This paper investigates the interplay between RIS and RS by considering a RIS-assisted RS beamforming problem. Active beamforming at the base station (BS) and passive beamforming at the RIS are jointly considered to maximize the minimum user rate under both the perfect CSI case and the imperfect CSI case. A block coordinate descent (BCD) algorithm is developed to solve this non-convex problem. Compared with the conventional semi-definite relaxation (SDR) approach, the proposed method does not require that the covariance matrix of the common beamforming vector be rank-one. Moreover, we present theoretical results to help reveal the impact of the system parameters and explain the performance gain resulting from the integration of RIS and RS. Extensive simulation results are also provided to show that RIS-assisted RS can improve the max-min rate performance significantly compared with conventional multiple access technologies, such as non-orthogonal multiple access (NOMA) and space division multiple access (SDMA) with/without RIS, especially in overloaded systems. With the proposed method, RS shows great potential in combating realistic CSI errors in RIS-assisted networks.

A Unified Rate-Splitting Framework for Secure Spectrum Sharing via Joint Precoding Optimization

To handle the security problem of cognitive radio (CR) systems, secondary users (SUs) are able to be designed to assist the primary user (PU) in secure transmission. To realize the spectrum sharing among CR users, we adopt the rate-splitting multiple access (RSMA) properly, with nonorthogonal multiple access (NOMA) and space division multiple access (SDMA) as its special cases. In this article, we set up a unified rate-splitting framework to guarantee the safe spectrum sharing through multiple multiaccess strategies, without the knowledge of wiretap channels. The precoding vectors at the transmitter are conjointly designed to boost the transmission of common stream, which is from both PU and SU. Besides, the private stream of the downlink CR system can be well secreted in the high-power common signal. As for NOMA and SDMA, when the message of SU is regarded as the friendly jamming signal, the security transmission requirement of PU can be similarly guaranteed via precoding design. Simulations validate that the rate-splitting framework we established can be effective in ensuring the spectrum sharing security for the secure users through RSMA, and the security for NOMA and SDMA is also able to be promoted through adjusting our designed framework.

Location Aware Beamforming in Millimeter-Wave Band Ultra-Dense Radio Access Networks. Part 2. Model of a Set of Radio Links

The second part of the study of beamforming issues, based on positioning in ultra-dense millimeter wave radio access networks, is devoted to the formalization and software implementation of a complex simulation model of the functioning of a set of directional radio links. Each directional radio link between a base station (gNodeB – gNB), equipped with an antenna array, and a user equipment (UE), operating in omnidirectional mode, is formed according to the location of the UE, known at the gNB. The set of gNB→UE directional radio links, simultaneously operating in a common frequency range, is studied as a set of traffic beams, that implement space division multiple access (SDMA). Spatial multiplexing is implemented through three-dimensional beamforming at the gNB and makes it possible to compensate for propagation losses and high levels of interference. In the first part of the study, it was shown that the problem of practical implementation of SDMA in ultra-dense radio access networks is a significant (tens of dB) spread in the signal to interference plus noise ratio (SINR), depending on the arrangement of two devices. The purpose of this study is to establish the dependence of SINR on 1) the beamwidth of the gNB sector in the direction of the user equipment in the radio link of the signal of interest (SOI); 2) uncertainty of the UE location; 3) interference from radio links of signal not of interest (SNOI): a) within its sector, b) other sectors of its cell and c) other cells in the network. The simulation model developed and implemented in software in this work for the first time made it possible to establish the interdependence of the UE positioning error factors and the required width of the traffic beam for its service. In particular, it was found, that as the positioning error decreases from 10 to 1 m, the required beam width in the horizontal and vertical planes narrows to 3 °, which makes it possible to increase the SINR to 25 dB. A simultaneous transmission multiplexing study showed that for 64 spatially multiplexed UEs, as the cell size increases from 20 to 300 m, the SINR increases by approximately 30 dB, subject to a beamwidth constraint of 3°. Unlike similar studies, in this model, the contribution from interference from simultaneously operating traffic beams within its sector, other sectors of its cell and other cells in the network is shown separately for the first time, which allows to differentiate the origin of interference and use scientifically based beamwidth control for their compensation.

Harmonic-Based MIMO Transceiver With Time-Modulated Arrays

A simple harmonic-based multiple-input multiple-output (MIMO) transceiver based on the time-modulated array (TMA) is proposed and verified, including detailed performance analysis, comparisons with state-of-the-art works and experiment verification. The essential concept is utilizing the time modulation technique to linearly map the actual multipath channels between multiple users and the antenna elements of the TMA to the equivalent virtual channels between users and harmonics with different frequencies. Models of the received and transmitted signals in both uplink and downlink transmissions based on the multi-user single-input multiple-output (SIMO) and multiple-input single-output (MISO) scenario are analyzed and derived, followed by the proposed harmonic channel estimation, detection and beamforming methods. Simulations on the performance of the proposed harmonic-based MIMO transceiver are provided and compared to the also TMA-based space division multiple access (SDMA) scheme, showing that the latter is more like a special case of the proposed scheme. An experimental 2-user wireless communication prototype based on a 4-element TMA is fabricated and tested to verify the feasibility and effectiveness of uplink signal transmission.

Joint online 3D trajectory optimisation and power allocation of UAVs as mobile access points in a downlink distributed multi-user MIMO system

Unmanned aerial vehicles (UAVs) are introduced as one of the key-enablers for 5G beyond networks due to their low cost and flexible deployment, and mobility degrees-of-freedom. Moreover, low sensitivity to blockage and uncorrelated channels in distributed multiple-input multiple-output (D-MIMO) systems, and their extension which is called cell-free massive MIMO, have made them an attractive research field. The location and number of access points (APs) in D-MIMO systems highly influence the system performance in terms of energy and spectral efficiency that can be handled by UAVs mobility and flexible deployment. In this paper, joint power allocation, and 3D trajectory design in a D-MIMO system for a downlink scenario where multiple UAVs serve as mobile APs (MbAPs) is investigated. Contrary to the existing works in multi-mobile base stations, we introduce space-division multiple access (SDMA) for the online trajectory design as a multi-access technology which does not suffer from the non-casual channel property in traditional trajectory designs. In the proposed design, the smallest user’s ergodic rate lower bound is maximised by jointly optimising MbAPs’ 3D trajectory and transmit power. The block coordinate descent (BCD) algorithm is deployed to break the main problem into two sub-problems and iteratively optimise over the two. Considering the non-convex nature of both of sub-problems, successive convex approximation is also exploited. For performance analysis, complexity and convergence property of the proposed algorithm are investigated. Finally, numerical results validate the improved performance of the proposed system in a practical scenario, where users can connect and disconnect to and from the network.

Compact Multimode Beamforming Antenna for Space-Division Multiple Access Application

In this letter, a multi-mode antenna for adaptive space-division multiple access (SDMA) application is proposed. The antenna merges a monopole-like radiator and a multi-mode resonant cavity into a compact structure. The amplitudes of three orthogonal modes are separately controlled by three ports in the cavity. By tuning the excitation power ratio and phase (only 0/180° is needed) at the three ports, the antenna pattern continuously scans across 360° in the H-plane. This controlling scheme makes both analog and digital beamforming easier and supports base station SDMA scenarios. The simulation and measurement results show the antenna has good scanning performance. The design is proved to be a good candidate for high throughput wireless communication systems, especially the miniaturized Internet of Things (IoTs) base station applications.

Robust Downlink Transmission Design in IRS-Assisted Cognitive Satellite and Terrestrial Networks

Cognitive satellite and terrestrial network (CSTN) is considered as a promising technology to provide ubiquitous connectivity for various users within wide-coverage. This paper proposes a robust downlink transmission scheme for multiple intelligent reflecting surfaces (IRSs) assisted CSTN. Here, the satellite network adopts multigroup multicast transmission scheme to serve many earth stations, while the terrestrial network exploits space division multiple access and multi-IRS-enhanced non-orthogonal multiple access technology to communicate with many terrestrial users. By assuming that these two networks share the same frequency band having only the angular information based imperfect channel state information of each user, we formulate an optimization problem to minimize the total transmit power subject to the constraints of quality-of-service requirement for each user, per-antenna transmit power budgets of satellite and BS, and unit-modulus requirement for each reflecting element. To tackle this mathematically intractable problem, we then employ angular discretization together with the successive convex approximation method to obtain the active beamforming (BF) vectors of satellite and BS, the passive BF vector of IRS, and the power allocation coefficients. Moreover, we propose a generalized zero forcing BF and alternative optimization to obtain the suboptimal solutions of the optimization problem with low computational complexity. Finally, simulation results are given to demonstrate the effectiveness and superiority of the proposed two schemes over the benchmarks.

Hybrid Space Division Multiple Access and Quasi-Orthogonal Multiple Access for Multi-User Underwater Visible Light Communication

Hybrid Space Division Multiple Access and Quasi-Orthogonal Multiple Access for Multi-User Underwater Visible Light Communication

Uplink Multiple Access With Semi-Grant-Free Transmission in Integrated Satellite-Aerial-Terrestrial Networks

This paper investigates a semi-grant-free (SGF) based transmission strategy to provide a flexible connectivity for various kinds of users in an integrated satellite-aerial-terrestrial network (ISATN). Herein, a high-altitude platform (HAP) termed as a grant-based user (GBU), which serves multiple mobile terminals (MTs) through space division multiple access (SDMA), wants to access a satellite network with multiple earth stations (ESs) termed as grant-free users (GFUs) simultaneously via non-orthogonal multiple access (NOMA) assisted SGF. To this end, we first propose two SGF-based uplink transmission schemes for both perfect channel state information (CSI) and imperfect CSI cases. When perfect CSI is available, a zero-forcing based beamforming (BF) scheme is used in HAP network while an adaptive transmit power allocation (ATPA) approach is adopted for SGF transmission. When only imperfect CSI is available, BF scheme employing the derived channel correlation matrix of HAP-MT link is proposed to achieve SDMA, and a novel ATPA strategy with rate probability constraint is proposed to guarantee quality-of-service of the GBU. Next, we derive the closed-form throughput expressions to evaluate the performance of the considered ISATN with the proposed two SGF-based schemes. Finally, computer simulations are conducted to validate the theoretical performance analysis and show the superiority of the proposed schemes over the related works. Moreover, our numerical results not only demonstrate a satisfactory performance of the proposed SGF-based scheme using imperfect CSI, but also reveal the impact of CSI errors on the system performance.

面向语义通信的模分多址技术

In a multi-user system, system resources should be allocated to different users. In traditional communication systems, system resources generally include time, frequency, space, and power, so multiple access technologies such as time division multiple access (TDMA), frequency division multiple access (FDMA), space division multiple access (SDMA), code division multiple access (CDMA), and non-orthogonal multiple access (NOMA) are widely used. In semantic communication, which is considered a new paradigm of the next-generation communication system, we extract high-dimensional features from signal sources in a model-based artificial intelligence approach from a semantic perspective and construct a model information space for signal sources and channel features. From the high-dimensional semantic space, we excavate the shared and personalized information of semantic information and propose a novel multiple access technology, named model division multiple access (MDMA), which is based on the resource of the semantic domain. From the perspective of information theory, we prove that MDMA can attain more performance gains than traditional multiple access technologies. Simulation results show that MDMA saves more bandwidth resources than traditional multiple access technologies, and that MDMA has at least a 5-dB advantage over NOMA in the additive white Gaussian noise (AWGN) channel under the low signal-to-noise (SNR) condition.

A Primer on Rate-Splitting Multiple Access: Tutorial, Myths, and Frequently Asked Questions

Rate-Splitting Multiple Access (RSMA) has emerged as a powerful multiple access, interference management, and multi-user strategy for next generation communication systems. In this tutorial, we depart from the orthogonal multiple access (OMA) versus non-orthogonal multiple access (NOMA) discussion held in 5G, and the conventional multi-user linear precoding approach used in space-division multiple access (SDMA), multi-user and massive MIMO in 4G and 5G, and show how multi-user communications and multiple access design for 6G and beyond should be intimately related to the fundamental problem of interference management. We start from foundational principles of interference management and rate-splitting, and progressively delineate RSMA frameworks for downlink, uplink, and multi-cell networks. We show that, in contrast to past generations of multiple access techniques (OMA, NOMA, SDMA), RSMA offers numerous benefits: 1) enhanced spectral, energy and computation <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">efficiency</i> ; 2) <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">universality</i> by unifying and generalizing OMA, SDMA, NOMA, physical-layer multicasting, multi-user MIMO under a single framework that holds for any number of antennas at each node (SISO, SIMO, MISO, and MIMO settings); 3) flexibility by coping with any interference levels (from very weak to very strong), network loads (underloaded, overloaded), services (unicast, multicast), traffic, user deployments (channel directions and strengths); 4) <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">robustness</i> to inaccurate channel state information (CSI) and <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">resilience</i> to mixed-critical quality of service; 5) <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">reliability</i> under short channel codes and <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">low latency</i> . We then discuss how those benefits translate into numerous opportunities for RSMA in over forty different applications and scenarios of 6G, e.g., multi-user MIMO with statistical/quantized CSI, FDD/TDD/cell-free massive MIMO, millimeter wave and terahertz, cooperative relaying, physical layer security, reconfigurable intelligent surfaces, cloud-radio access network, internet-of-things, massive access, joint communication and jamming, non-orthogonal unicast and multicast, multigroup multicast, multibeam satellite, space-air-ground integrated networks, unmanned aerial vehicles, integrated sensing and communications, grant-free access, network slicing, cognitive radio, optical/visible light communications, mobile edge computing, machine/federated learning, etc. We finally address common myths and answer frequently asked questions, opening the discussions to interesting future research avenues. Supported by the numerous benefits and applications, the tutorial concludes on the underpinning role played by RSMA in next generation networks, which should inspire future research, development, and standardization of RSMA-aided communication for 6G.

Flexible Rate-Splitting Multiple Access With Finite Blocklength

Rate-splitting multiple access (RSMA) is a promising multiple access (MA) technique. It employs rate-splitting (RS) at the transmitter and successive interference cancellation (SIC) at the receiver. Most of the existing works on RSMA assume that all users use SIC to decode the common stream and the blocklength is infinite. The first assumption causes the data rate of the common stream to be limited by the user with the worst channel quality. The second assumption may lead to suboptimal performance in practical systems with finite blocklength. In this paper, we propose a flexible RSMA scheme, which allows the system to decide whether a user should use SIC to decode the common stream or not. We consider the effective throughput as the performance metric, which incorporates the data rate as well as the error performance of RSMA with finite blocklength. We first derive the effective throughput expression and then formulate an effective throughput maximization problem by jointly optimizing the beamforming vectors, transmission data rates, and RS-user selection. We develop an optimal algorithm as well as a low-complexity algorithm for beamforming design. We derive a semi-closed-form solution of the optimal data rates and propose an efficient algorithm for the RS-user selection. Numerical results demonstrate that the proposed algorithm obtains a higher effective throughput than space division multiple access (SDMA), non-orthogonal multiple access (NOMA), and two other RSMA schemes.

Max-Min Fairness of Rate-Splitting Multiple Access With Finite Blocklength Communications

Rate-Splitting Multiple Access (RSMA) has emerged as a flexible and powerful framework for wireless networks. In this paper, we investigate the user fairness of downlink multi-antenna RSMA in short-packet communications with/without cooperative (user-relaying) transmission. We design optimal time allocation and linear precoders that maximize the Max-Min Fairness (MMF) rate with Finite Blocklength (FBL) constraints. The relation between the MMF rate and blocklength, as well as the impact of cooperative transmission are investigated. Numerical results demonstrate that RSMA can achieve the same MMF rate as Non-Orthogonal Multiple Access (NOMA) and Space Division Multiple Access (SDMA) with smaller blocklengths (and therefore lower latency), especially in cooperative transmission deployment. Hence, we conclude that RSMA is a promising multiple access for guaranteeing user fairness in low-latency communications.

Robust Beamforming for RIS Enhanced Transmissions in Cognitive Radio Networks

We propose a robust beamforming (BF) scheme for reconfigurable intelligent surface (RIS) enhanced transmission to support heterogeneous services with diverse signal-to-interference-plus-noise ratio requirements in cognitive radio networks (CRNs). Here, the CRN coexisting with a primary network offers connection-centric services and content-aware services through space division multiple access and RIS-aided multicast technology, respectively. Using imperfect statistical channel state information, the RIS enhanced transmission scheme is formulated as a non-convex optimization problem with outage constraints. To address this intractable problem, we first use the cumulative distribution function of a standard normal distribution and Schur complement approaches to transform the non-convex outage constraints into solvable ones. Then, a robust BF algorithm integrating alternate optimization with semidefinite relaxation methods is proposed to obtain the active BF weight vectors at the cognitive base station and the phase shift matrix at the RIS. Our simulation results demonstrate the robustness of the proposed BF algorithm and the superiority of the RIS enhanced wireless transmission.

Research on Power Allocation in Multiple-Beam Space Division Access Based on NOMA for Underwater Optical Communication.

To meet the transmission requirements of different users in a multiple-beam access system for underwater optical communication (UWOC), this paper proposes a novel multiple-beam space division multiple access (MB-SDMA) system by utilizing a directional radiation communication beam of the hemispherical LED arrays. The system's access users in the different beams are divided into two categories: the users with a single beam and the users with multiple beams. We also propose a power allocation algorithm that guarantees the quality of service (QoS) for single beam and multiple beam access, especially the QoS for edge users, and fairness for all users. An optimization model of power distribution under the constraints of specific light-emitting diode (LED) emission power is established for two scenarios, which ensure the user QoS for edge users and the max-min fairness for fair users. Using the Karush-Kuhn-Tucker (KKT) condition and the bisection method, we obtain the optimal power allocation expression for the two types of users in the optimization model. Through simulation, we verify that the proposed user classification and power allocation method can ensure the fairness of fair users on the premise of ensuring the QoS of edge users. At the same time, we know that the number of users will affect the improvement of the minimum rate, and the throughput of the non-orthogonal multiple access (NOMA) system is greatly improved compared with the traditional orthogonal multiple access (OMA) systems.

IRS-Aided Uplink Transmission Scheme in Integrated Satellite-Terrestrial Networks

This paper proposes an intelligent reflecting surface (IRS)-aided uplink transmission scheme to expand the wireless coverage and improve spectral efficiency for an integrated satellite-terrestrial network (ISTN). Here, multiple earth stations communicate with the satellite via non-orthogonal multiple access (NOMA) technology, while multiple direct users and blockage users access the cellular network through space division multiple access and IRS-aided NOMA technology, respectively. In particular, we first aim at maximizing the ergodic sum rate of the ISTN subject to the quality-of-service requirements and transmit power budgets of all users, yielding a constrained optimization problem. Then, based on the assumption that only the statistical channel state information (CSI) is available, we propose a two-layer alternating algorithm to solve the non-convex original problem. The algorithm combines successive convex approximation with <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$S$</tex-math></inline-formula> -procedure approach to calculate the phase shifts of IRS and transmit powers of all users in the first layer, and uses Charnes-Cooper method with semi-definite programming to calculate beamforming vectors at the BS in the second layer. Furthermore, with the help of the zero-forcing beamforming principle, we propose a low-complexity algorithm to solve the problem that can reduce the computational load effectively. Finally, simulation results demonstrate that our proposed algorithms can obtain a higher ergodic sum rate than the benchmarks.

Model for Interference Evaluation in 5G Millimeter-Wave Ultra-Dense Network with Location-Aware Beamforming

Location-Aware Beamforming (LAB) in Ultra-Dense Networks (UDN) is a breakthrough technology for 5G New Radio (NR) and Beyond 5G (B5G) millimeter wave (mmWave) communication. Directional links with narrow antenna half-power beamwidth (HPBW) and massive multiple-input multiple-output (mMIMO) processing systems allows to increase transmitter and receiver gains and thus facilitates to overcome high path loss in mmWave. Well known problem of pencil beamforming (BF) is in construction of precoding vectors at the transmitter and combining vectors at the receiver during directional link establishing and its maintaining. It is complicated by huge antenna array (AA) size and required channel state information (CSI) exchange, which is time consuming for vehicle user equipment (UE). Knowledge of transmitter and receiver location, UE or gNodeB (gNB), could significantly alleviate directional link establishment and space division multiple access (SDMA) implementation. Background of SDMA is in efficient maintenance of affordable level of interference, and the purpose of this research is in signal-to-interference ratio (SIR) evaluation in various 5G UDN scenarios with LAB. The method, used to evaluate SIR, is link level simulation, and results are obtained from publicly released open-source simulator. Contribution of research includes substantiation of allowable UE density, working with LAB. Practical implications include recommendations on terrestrial and angular separation of two UE in 5G UDN scenarios.