Soybean Beverages Research Articles

Influence of modified cassava starch on the physicochemical properties of a fermented soybean beverage

Fermented soybean beverages are an alternative for improving intestinal health, and fermentation reduces the anti-nutritional factors of this legume. However, they do show high syneresis and low viscosity. Modified cassava starches could be added as a thickener and/or stabilizer to improve the quality of the product. The aim of this research was to assess the effect of adding modified cassava starch on the physicochemical properties of a fermented soybean beverage. Preliminary tests were carried out varying the concentration (0.8%, 1.0%, and 1.2%) of 3 types of modified cassava starch: octenyl succinic anhydride (OSA), acetylated distarch adipate (ADA) cross-linked starch, and substituted-crosslinked starch (mixed). A commercial culture of starter microorganisms and probiotics was used in the fermentation process. The statistical analysis was carried out with a two-factor (type of starch and concentration) and 3-level design; quality parameters such as pH, acidity, soluble solids, syneresis, and viscosity comparable to commercial fermented dairy beverages were evaluated. OSA starch had a lower syneresis and higher viscosity than the other starches for each concentration. Furthermore, the addition of 1.0% OSA and mixed starch, as well as 1.2% ADA starch, are comparable to the control commercial soybean beverage (SC).

Fluoride Exposure from Soybean Beverage Consumption: A Toxic Risk Assessment.

The consumption of vegetable milk as a substitute for cow’s milk has increased in recent years. Of all the vegetable beverages on the market, soy is the most widely consumed. Soy is exposed to contamination by different chemical elements during harvesting. In this study, the concentration of fluoride in soy beverages was analyzed. Fluoride is an element that in high concentrations can be toxic, causing dental and bone fluorosis. The aims of the study were (i) to analyze the fluoride concentration in 30 samples in the most popular brands (A-Brand, B-Brand, C-Brand) of soybean beverages by a fluoride ion selective potentiometer and (ii) to evaluate the toxicological risk derived from its consumption. The fluoride concentrations were 15.5 mg/L (A-Brand), 11.3 mg/L (B-Brand) and 8.5 mg/L (C-Brand). A consumption of 1 to 3 servings/day was established. One serving (200 mL) of soybean beverage offered a contribution percentage over the ADI (acceptable daily intake) for infants and children. Teenagers and adults did not exceed the ADI (10 mg/day). The consumption of soy beverages contributes significantly to the daily intake of fluoride, which could exceed the ADI with a consequent health risk. It is recommended to control the fluoride levels in the raw material and in the final product to assure the safety of these products.

Relationship between Physicochemical and Sensory Characteristics of Commercial Plant-Based Beverages

ABSTRACT This study aims to evaluate the relationship between the physicochemical characteristics and sensorial profile of a plant-based beverage. The beverages were classified as hypotonic (cashew nut, oat, and soybean beverages) and isotonic (rice and spelt grain beverages). The spelt grain and cashew nut beverages presented a higher content of particles with flocculation and higher sedimentation values. The viscosity of the beverages varied from 5.0–16.8 mPa.s. The viscosity and color attributes in the sensorial analysis were considered “about-right” or “much-more-than-ideal” by over 50% of the judges for the soybean (81 judges for both viscosity and color, respectively) and oat (65 and 69, respectively) beverages. The highest acceptability index for the flavor attribute was found for the soybean beverage, which was the most preferred beverage (p < .01).

Nutritional Function and Flavor Evaluation of a New Soybean Beverage Based on Naematelia aurantialba Fermentation.

The soy beverage is a healthy product rich in plant protein; however, its unpleasant flavor affects consumer acceptance. The aim of this study was to determine the feasibility of using Naematelia aurantialba as a strain for the preparation of fermented soybean beverages (FSB). Increases in Zeta potential, particle size, and viscosity make soy beverages more stable. We found that nutrient composition was increased by fermenting N. aurantialba, and the antioxidant activity of soybean beverages significantly increased after 5 days of fermentation. By reducing the content of beany substances such as hexanal and increasing the content of 1-octen-3-ol, the aroma of soybean beverages fermented by N. aurantialba changed from “beany, green, and fatty” to “mushroom and aromatic”. The resulting FSB had reduced bitterness but considerably increased sourness while maintaining the fresh and sweet taste of unfermented soybean beverages (UFSB). This study not only provides a theoretical basis for the market promotion of FSB but also provides a reference for basidiomycetes-fermented beverages.

Human Exposure to Potentially Toxic Elements from the Consumption of Soybean Beverages Commercialized in Spain

Plant-based beverages have been positioned as an alternative to cow's milk. Some of the most commonly consumed plant-based beverages are those made from soybeans. Soybean beverages can be an important source of essential elements. However, soybean plants can be exposed to high concentrations of contaminants, such as toxic metals, from the soil and the environment. The objective of this study was to determine the concentrations of potentially toxic elements (PTEs; Fe, Cu, Cr, Co, Mn, Mo, Zn, B, Ba, Ni, Li, Sr, V, Al, Cd, and Pb) to evaluate the human exposure and toxic risk from the consumption of these soybean beverages. Forty samples of various brands of soybean beverages were analyzed by inductively coupled plasma-optical emission spectroscopy. The most abundant PTE was Al (3.93 mg/L), followed by Fe (1.91 mg/L) and Ba (0.69 mg/L). Based on a mean consumption of two servings of soybean beverage per day (250 mL per serving), this consumption results in a daily intake of Al and Pb that is significant but still below of the maximum recommended amount. However, higher consumption could exceed the maximum recommended Al and Pb values, with consequent risks to the human health.

Systemic allergic reactions induced by labile plant-food allergens: Seeking potential cofactors. A multicenter study.

Heat-and-pepsin-sensitive plant food allergens (PR-10 and profilin) sometimes cause systemic reaction. To detect the risk factors for systemic reactions induced by labile food allergens. A retrospective multicenter study was performed on patients with a documented history of systemic allergic reaction to labile plant food allergens and on age-matched controls with a history of oral allergy syndrome (OAS) induced by the same foods. Offending foods, their amount, and state (solid or liquid), and potential cofactors (nonsteroidal anti-inflammatory drugs, protonic pump inhibitors, exercise, alcohol, and fasting) were considered. We studied 89 patients and 81 controls. Sensitization to PR-10 or profilin, IgE to Bet v 1 and/or Bet v 2, and foods causing OAS were similar in the two groups. Twenty patients experienced >1 systemic allergic reaction. Tree nuts, Rosaceae, Apiaceae, and soymilk were the main offending foods. Seventeen (19%) patients were taking a PPI when the systemic reaction occurred (vs 5% in controls; P<.025). The ingestion of the offending food in liquid form (soymilk) was frequent among patients (15%) but unusual among controls (2%; P<.025). Soy milk-induced systemic reactions were independent of PPI treatment. Fasting and excess of allergen, but not NSAID and exercise, were other relevant cofactors for systemic reactions. Systemic reactions occurred without any identifiable cofactor in 39 (44%) cases. PR-10- and profilin-induced systemic reactions are facilitated by PPI, ingestion of large amounts of unprocessed foods, and fasting. Soybean beverages represent a risk for PR-10 hypersensitive patients and should be avoided.

In vitro gastrointestinal digestion of a peanut, soybean, guava and beet beverage supplemented with Lactobacillus rhamnosus GG

The resistance of Lactobacillus rhamnosus GG (LGG) to in vitro gastrointestinal digestion in mixed beverages (MB) prepared with legumes, peanut (MBPP) or soybean (MBSP), containing guava pulp and beet was evaluated, as well as the physical-chemical, microbiological and sensorial characteristics of these products. For this purpose, 4 beverages (MBPP and MBSP with probiotic and MBPC and MBSC as a control, without probiotic) were prepared. MBPP and MBSP was fermented and maintained together with their controls at 8 °C for 42 days. In the in vitro test of gastrointestinal resistance, for 100 mL of beverage ~8.34 and 7.50 Log CFU/mL of LGG were available after digestion in BMPP and BMSP, respectively, which makes these products potential probiotics. The viability of LGG was >7.3 Log CFU/mL throughout storage in the beverages, which were microbiologically safe for consumption. The beverages containing LGG showed higher acidity and lower pH after processing compared to those without fermentation. Soybean beverages showed higher protein content (p < 0.05) compared to peanut beverages, which did, however, have higher lipids. After processing, the products showed hedonic scores equivalent to “I liked it a little” and “I liked it a lot”, which suggested a willingness to consume the product, thus possibly being viable non-dairy beverages.

Influence of Fine Bubble Processing on the Characteristics of Soybean Beverages

Soybean beverages are popular due to health consciousness of consumers, but soybean beverages, which have a high viscosity or a grassy smell, are less favored. Fine bubble processing for soybean beverages has attached much attention because of its ability to control their viscosity. However, it is not clear how fine bubble processing for soybean beverages affects consumer preferences. In this study, the effect of fine bubble processing on the drinkability of a soybean beverage was examined. As a result, it was found that fine bubble processing for soybean beverages affected the evaluation of drinking such as “mellowness”, “unique/peculiar”, and “ease of drinking”. From principal component analysis, drinking sensation of soybean beverages was expressed by two main components: “tasting” and “rich”. From the comparison between the unprocessed and processed samples, fine bubble processing made soybean beverages tastier and lighter.

Use of Pulsed Ultraviolet Light to Reduce the Allergenic Potency of Soybean Extracts

Pulsed ultraviolet light (PUV), a non-thermal food processing technology, is reported to be able to inactivate enzymes and reduce allergen levels from peanut extracts. The objective of this study was to determine if PUV would reduce the allergen levels and allergenic potency of soy extracts. Soy extracts were treated with PUV at various times (2, 4 and 6 min), centrifuged, and analyzed by SDS-PAGE and an indirect ELISA for IgE binding or allergenic potency. Results showed that PUV treatment led to an increase in sample temperature/weight loss but a decrease in the levels of soy allergens (i.e., glycinin and ?-conglycinin) as shown in SDS-PAGE. Allergens were reduced probably through aggregation which increased with treatment time. IgE binding was reduced as well in the following order: 20%, 44% and 50% reductions in absorbance values at 2, 4, 6 min, respectively (the latter two were not significantly different (p &lt; 0.05%) from each other). It was concluded that PUV was capable of reducing the allergenic potency of soy extracts, and that the optimal PUV treatment time was 4 min. Clinical data is still needed before PUV can find an application in the development of less allergenic soybean beverages and products.

Colour and viscosity of milk and soybean vanilla beverages. Instrumental and sensory measurements

AbstractBACKGROUND: Differences in instrumental measurements of colour and viscosity were analysed in six commercial samples of vanilla beverages, three of milk and three of soybean. Sensory differences between them were assessed and an analysis was made of whether the perceived differences had any influence on consumer preferences with respect to these attributes.RESULTS: The milk beverages were a stronger yellow in colour (45.05≤b*≤60.02) than the soybean beverages (18.46≤b*≤21.96). The flow of all samples was Newtonian, showing viscosity values in the range 4.34–7.92 mPa s. Significant differences in viscosity were detected between samples. Sensory results revealed that the vanilla milk samples were perceived as having a stronger yellow colour and being thicker than the vanilla soymilk samples. The majority of people surveyed (n = 142) preferred the samples that were deeper yellow in colour; moreover, the thickness of milk samples was significantly more acceptable than that of soymilk samples.CONCLUSION: The instrumental measurement of colour relates well to the perceived differences in the colour of these products and explains the differences in consumer preferences. However, the instrumental viscosity values do not relate well to the thickness perceived or to the differences in acceptability of the beverages. Copyright © 2007 Society of Chemical Industry