Agkistrodon Contortrix Research Articles

Apparent Ophidiomycosis Alters Eastern Copperhead (Agkistrodon contortrix) Behavior and Habitat Use.

Pathogens not only cause mortality but also impose nonlethal fitness consequences. Snakes experience trade-offs associated with behaviors that combat disease but divert time and energy away from other critical activities. The impacts of such behaviors on fitness remain poorly understood, raising concerns amid the emergence of novel herpetofaunal diseases. Ophidiomycosis, caused by the ascomycete fungus Ophidiomyces ophidiicola, impacts free-ranging snakes across North America and has been implicated in declines of several imperiled populations. Although previous ophidiomycosis research has primarily focused on disease-related mortality, few studies have evaluated nonlethal impacts on snake fitness. To address this knowledge gap, we investigated the effects of apparent ophidiomycosis on the behavior, habitat use, and movement of snakes in central New Jersey, USA, from 2020 to 2021. Our focal species was the eastern copperhead (Agkistrodon contortrix), a state species of special concern with limited representation in the ophidiomycosis literature. Although we did not observe mortality in our study population, we found that copperheads with apparent ophidiomycosis (8/31 individuals) displayed significantly different thermoregulatory behaviors than snakes without ophidiomycosis. Specifically, individuals with apparent ophidiomycosis favored areas with less canopy cover, less rock cover, and more coarse woody debris. Our findings suggest that snakes with apparent ophidiomycosis select habitats conducive to initiating behavior-mediated fever, potentially facilitating recovery.

Efficacy and safety of two Antivenoms in the treatment of eastern copperhead (Agkistrodon contortrix) envenomations in Southeast Texas.

There are two Food and Drug Administration-approved antivenoms for the treatment of North American pitviper envenomations: Crotalidae polyvalent immune fab (ovine) (CroFab, henceforth FabAV) and Crotalidae immune F(ab')2 (equine) (Anavip, henceforth Fab2AV). This study compared the effectiveness and safety of the two products in eastern copperhead envenomations. We retrospectively reviewed eastern copperhead bites on which our toxicology service consulted between January 1, 2021 and November 1, 2023. Collected data included patient demographics, bite location, clinical features, antivenom use, response to treatment, and adverse reactions to antivenom. There were 134 patients with confirmed copperhead envenomations. We administered antivenom to 89 patients, of which 36 (40%) were female. The median age was 42 years old (range: 2-89 years). Fifty-nine patients received Fab2AV and 30 were treated with FabAV. Initial control was achieved in 30 (100%) patients treated with FabAV. In the Fab2AV group, 53 (89.8%) achieved control; six patients with acute adverse reactions declined further treatment despite persistent symptoms. The median FabAV dose required for initial control was six vials (range: 4-6). A median dose of 10 vials (range: 10-30) was used in the Fab2AV group. Repeat doses of Fab2AV were required in 15 (25.4%) cases. There were no acute adverse reactions to FabAV. Acute adverse reactions were seen in seven (11.9%) of patients treated with Fab2AV. Fewer patients treated with FabAV required repeat antivenom dosing to attain initial control following eastern copperhead envenomation. A higher percentage of patients treated with Fab2AV developed acute adverse reactions.

Transcription factor PagERF110 inhibits leaf development by direct regulating PagHB16 in poplar

Ethylene-responsive factor (ERF) family genes are crucial for plant growth and development. This study analyzed the functional role of the PagERF110 gene in leaf development of Populus alba×P. glandulosa. PagERF110 contains the AP2 conserved domain and exhibits transcriptional activation activity at its C-terminus. Overexpression of PagERF110 in transgenic poplar trees resulted in reduced leaf size, leaf area, and vein xylem thickness. Yeast two-hybrid (Y2H) and bimolecular fluorescence complementation (BiFC) experiments confirmed that PagERF110 interacts with PagACD32.1. Transcriptome sequencing revealed that PagERF110 regulates the expression of key genes involved in leaf development. Furthermore, yeast one-hybrid (Y1H) assays, GUS staining, and ChIP experiments collectively confirmed that PagERF110 targets the expression of PagHB16. In summation, our findings demonstrate that PagERF110 functions as a negative regulator in poplar leaf development.

Biocontrol mechanisms of poplar leaf blight due to Nigrospora oryzae.

Nigrospora oryzae, a newly identified pathogen, is responsible for poplar leaf blight, causing significant harm to poplar growth. Here, we describe, for the first time, a biological control method for the control of poplar leaf blight via the applications of 3 dominant Trichoderma strains/species. In this study, dominant Trichoderma species/strains with the potential for biocontrol were identified and then further characterised via dual culture assays, volatile organic compounds (VOCs), and culture filtrates. The biocontrol efficacy of these strains against N. oryzae was found to exceed 60%. Furthermore, the reactive oxygen species (ROS) content in Populus davidiana × P. alba var. pyramidalis (PdPap) leaves pretreated with these Trichoderma strains significantly decreased. Furthermore, pretreatment of PdPap with a combination of these Trichoderma (Tcom) resulted in 9.71-fold and 1.95-fold increases in peroxidase (POD) and superoxide dismutase (SOD) activity, respectively, and 3.87-fold decrease in the MDA content compared to controls. Moreover, Tcom pretreatment activated the salicylic acid (SA) and jasmonic acid (JA) pathway-dependent defence responses of poplar, upregulating pathogenesis-related protein (PR) and MYC proto-oncogene (MYC-R) by more than 12-fold and 17.32-fold, respectively. In addition, Trichoderma treatments significantly increased the number of lateral roots, aboveground biomass, and stomata number and density of PdPap, and Tcom was superior to the single pretreatments. The soil pH also became weakly acidic in these pretreatments, which is beneficial for the growth of PdPap seedlings. These findings indicate that these dominant Trichoderma strains can effectively increase biocontrol and poplar growth promotion.

Toxicity evaluation of imidacloprid 17.8% SL against poplar defoliator Clostera cupreata (Butler) (Lepidoptera: Notodontidae)

Poplar (P. deltoides) is a major agroforestry species that plays a significant role in the socio-economic development of farmers in Northwestern India. The poplar leaf defoliator, Clostera cupreata, is a major insect pest of poplar, occurring in serious proportions and causing significant growth loss to the trees. In pursuit of chemical management for the poplar defoliator, Imidacloprid 17.8% SL was evaluated for its median lethal toxicity (LC50) against C. cupreata. The LC50 was calculated as 0.0017% at 72 hours after treatment (HAT) against third instar C. cupreata larvae under laboratory conditions. The screening process for the toxicity of Imidacloprid against C. cupreata may provide a crucial step for the development of novel insecticides for managing forestry insect pests.

Impact of Fertilizers Application on Leaf Litter Decomposition and Nutrient Cycling in White Poplar (Populus alba L.) Forest Ecosystem

Fertilizer application plays a crucial role in the decomposition of white poplar leaf litter and cycling of nutrients within forest ecosystems. The impact of various fertilizer additions on white poplar leaf litter and nutrient cycling is poorly understood. In this study, seven treatments were conducted at the following levels: Control (CK), no adding mineral fertilizers, N fertilization (+N), N and P fertilization (+NP), N, P, K fertilization (+NPK), P, K (+PK), manure fertilizer (+MF), and bird fertilizers (+BF) in a white poplar plantation in Qadis district, and used the litterbag techniques to measure litter mass remaining. The main objectives of our study were: (1) to explore the response of white poplar leaf litter decomposition to various fertilizers and accelerate the decomposition process; (2) to examine the relationship between C, N, and P concentration and their stoichiometric characteristic in leaf litter and soil. In this investigation, our results showed that white poplar leaf litter was significantly affected by fertilizers, and the decomposition process was greatly accelerated with + MF, +NPK, and + BF. The decay rate constant k (year −1) shows the decomposition rate of white poplar leaf litter as follows: +MF > +NPK > +BF > +PK > +NP > +N > CK (0.56, 0.53, 0.52, 0.51,0.51,0.5, and 0.46). Soil nutrients N, P and K increased significantly during the decomposition time with + MF, +NPK, and + BF, respectively, while C:N, C:P, and N:P ratios were highest in the white poplar leaf litter, and lowest in soil, we observed significant association between nutrients concentrations in soil and white poplar leaf and their stoichiometric. This current study concluded that adding + MF, +NPK and + BF fertilizers might be the preferred management option as they provided potentially beneficial changes in leaf litter decomposition and increased nutrient concentration. The data obtained will be a valuable reference for fertilization management strategies in forest ecosystems.

The Resource Utilization of Poplar Leaves for CO2 Adsorption.

Every late autumn, fluttering poplar leaves scatter throughout the campus and city streets. In this work, poplar leaves were used as the raw material, while H3PO4 and KOH were used as activators and urea was used as the nitrogen source to prepare biomass based-activated carbons (ACs) to capture CO2. The pore structures, functional groups and morphology, and desorption performance of the prepared ACs were characterized; the CO2 adsorption, regeneration, and kinetics were also evaluated. The results showed that H3PO4 and urea obviously promoted the development of pore structures and pyrrole nitrogen (N-5), while KOH and urea were more conductive to the formation of hydroxyl (-OH) and ether (C-O) functional groups. At optimal operating conditions, the CO2 adsorption capacity of H3PO4- and KOH-activated poplar leaves after urea treatment reached 4.07 and 3.85 mmol/g, respectively, at room temperature; both showed stable regenerative behaviour after ten adsorption-desorption cycles.

The expansion of oligopeptide transporters in Melampsora larici-populina may reflect its adaptation to a phytoparasitic lifestyle

The acquisition of nutrients from host plants by phytopathogenic fungi is critically important for their invasion success. Melampsora larici-populina, an obligate biotrophic pathogenic fungus, causes the poplar leaf rust disease and can severely damage host poplar plants. Previously, we found that oligopeptide transporters (OPTs) have undergone a convergent expansion, which might reflect adaptation to a phytoparasitic lifestyle. Here, we used various methods to evaluate this hypothesis, including conserved motif identification, positive selection signal mining, expression pattern clustering analysis, and neutral selection tests. The motif composition of the five clades in the OPT family differed, and positive selection was observed during clade differentiation. This suggests that OPTs in these five clades may be functionally differentiated, which would increase the range of transported substrates and promote the absorption of more types of nitrogen compounds from the hosts. According to clustering analysis of gene expression patterns, the expression of most genes from the two expanded clades (clade 2 and 4) was up-regulated during the infection of poplar trees, indicating that the expansion of OPTs likely occurred to promote the uptake of oligopeptides from host poplar plants. The MellpOPT4g gene was determined to be under significant balancing selection based on the neutral selection tests, suggesting that it plays a role in the pathogenic process. In conclusion, these three observations provide preliminary evidence supporting our hypothesis, as they indicate that the expansion of OPTs in M. larici-populina has aided the ability of this pathogen to acquire nutrients from host plants.

Disability resulting from Delayed treatment after a Copperhead snake bite to the hand

Disability resulting from Delayed treatment after a Copperhead snake bite to the hand

Spatiotemporal metabolic responses to water deficit stress in distinct leaf cell-types of poplar.

The impact of water-deficit (WD) stress on plant metabolism has been predominantly studied at the whole tissue level. However, plant tissues are made of several distinct cell types with unique and differentiated functions, which limits whole tissue 'omics'-based studies to determine only an averaged molecular signature arising from multiple cell types. Advancements in spatial omics technologies provide an opportunity to understand the molecular mechanisms underlying plant responses to WD stress at distinct cell-type levels. Here, we studied the spatiotemporal metabolic responses of two poplar (Populus tremula× P. alba) leaf cell types -palisade and vascular cells- to WD stress using matrix-assisted laser desorption/ionization-mass spectrometry imaging (MALDI-MSI). We identified unique WD stress-mediated metabolic shifts in each leaf cell type when exposed to early and prolonged WD stresses and recovery from stress. During water-limited conditions, flavonoids and phenolic metabolites were exclusively accumulated in leaf palisade cells. However, vascular cells mainly accumulated sugars and fatty acids during stress and recovery conditions, respectively, highlighting the functional divergence of leaf cell types in response to WD stress. By comparing our MALDI-MSI metabolic data with whole leaf tissue gas chromatography-mass spectrometry (GC-MS)-based metabolic profile, we identified only a few metabolites including monosaccharides, hexose phosphates, and palmitic acid that showed a similar accumulation trend at both cell-type and whole leaf tissue levels. Overall, this work highlights the potential of the MSI approach to complement the whole tissue-based metabolomics techniques and provides a novel spatiotemporal understanding of plant metabolic responses to WD stress. This will help engineer specific metabolic pathways at a cellular level in strategic perennial trees like poplars to help withstand future aberrations in environmental conditions and to increase bioenergy sustainability.

The regulatory pathway of transcription factor MYB36 from Trichoderma asperellum Tas653 resistant to poplar leaf blight pathogen Alternaria alternata Aal004

In fungi, MYB transcription factors (TFs) mainly regulate growth, development, and resistance to stress. However, as major disease-resistance TFs, they have rarely been studied in biocontrol fungi. In this study, MYB36 of Trichoderma asperellum Tas653 (Ta) was shown to respond strongly to the stress caused by Alternaria alternata Aa1004. Compared with wild-type Ta (Ta-Wt), the inhibition rate of the MYB36 knockout strain (Ta-Kn) on Aa1004 decreased by 11.06%; the superoxide dismutase (SOD), peroxidase (POD), and catalase (CAT) activities decreased by 82.15 U/g, 0.19 OD470/min/g, and 1631.2 μmol/min/g, respectively. The MYB36 overexpression strain (Ta-Oe) not only enhanced hyperparasitism on Aa1004, caused its hyphae to swell, deform, or even rupture, but also reduced the incidence rate of poplar leaf blight. MYB36 regulates downstream (TFs, detoxification genes, defense genes, and other antifungal-related genes by binding to the cis-acting elements “ACAT” and “ATCG”. Zinc finger TFs, as the main antifungal TFs, account for 90% of the total TFs, and Zn37.5 (23.24-) and Zn83.7 (23.18-fold) showed the greatest expression difference when regulated directly by MYB36. The detoxification genes mainly comprised 11 major major facilitator superfamily (MFS) genes, among which MYB36 directly increased the expression levels of three genes by more than 2−3.44-fold. The defense genes mainly encoded cytochrome P450 (P450) and hydrolases. e.g., P45061.3 (2−10.95-), P45060.2 (2−7.07-), and Hyd44.6 (2−2.30-fold). This study revealed the molecular mechanism of MYB36 regulation of the resistance of T. asperellum to A. alternata and provides theoretical guidance for the biocontrol of poplar leaf blight and the anti-disease mechanism of biocontrol fungi.

Estimation of Biochemical Pigment Content in Poplar Leaves Using Proximal Multispectral Imaging and Regression Modeling Combined with Feature Selection.

Monitoring the biochemical pigment contents in individual plants is crucial for assessing their health statuses and physiological states. Fast, low-cost measurements of plants' biochemical traits have become feasible due to advances in multispectral imaging sensors in recent years. This study evaluated the field application of proximal multispectral imaging combined with feature selection and regressive analysis to estimate the biochemical pigment contents of poplar leaves. The combination of 6 spectral bands and 26 vegetation indices (VIs) derived from the multispectral bands was taken as the group of initial variables for regression modeling. Three variable selection algorithms, including the forward selection algorithm with correlation analysis (CORR), recursive feature elimination algorithm (RFE), and sequential forward selection algorithm (SFS), were explored as candidate methods for screening combinations of input variables from the 32 spectral-derived initial variables. Partial least square regression (PLSR) and nonlinear support vector machine regression (SVR) were both applied to estimate total chlorophyll content (Chla+b) and carotenoid content (Car) at the leaf scale. The results show that the nonlinear SVR prediction model based on optimal variable combinations, selected by SFS using multiple scatter correction (MSC) preprocessing data, achieved the best estimation accuracy and stable prediction performance for the leaf pigment content. The Chla+b and Car models developed using the optimal model had R2 and RMSE predictive statistics of 0.849 and 0.825 and 5.116 and 0.869, respectively. This study demonstrates the advantages of using a nonlinear SVR model combined with SFS variable selection to obtain a more reliable estimation model for leaf biochemical pigment content.

Secreted Effector Proteins of Poplar Leaf Spot and Stem Canker Pathogen Sphaerulina musiva Manipulate Plant Immunity and Contribute to Virulence in Diverse Ways.

Fungal effectors play critical roles in manipulating plant immune responses and promoting colonization. Sphaerulina musiva is a heterothallic ascomycete fungus that causes Septoria leaf spot and stem canker disease in poplar (Populus spp.) plantations. This disease can result in premature defoliation, branch and stem breakage, increased mortality, and plantation failure. However, little is known about the interaction between S. musiva and poplar. Previous work predicted 142 candidate secreted effector proteins in S. musiva (SmCSEPs), 19 of which were selected for further functional characterization in this study. SmCSEP3 induced plant cell death in Nicotiana benthamiana, while 8 out of 19 tested SmCSEPs suppressed cell death. The signal peptides of these eight SmCSEPs exhibited secretory activity in a yeast signal sequence trap assay. Confocal microscopy revealed that four of these eight SmCSEPs target both the cytoplasm and the nucleus, whereas four predominantly localize to discrete punctate structures. Pathogen challenge assays in N. benthamiana demonstrated that the transient expression of six SmCSEPs promoted Fusarium proliferatum infection. The expression of these six SmCSEP genes were induced during infection. SmCSEP2, SmCSEP13, and SmCSEP25 suppressed chitin-triggered reactive oxygen species burst and callose deposition in N. benthamiana. The candidate secreted effector proteins of S. musiva target multiple compartments in the plant cell and modulate different pattern-triggered immunity pathways. [Formula: see text] The author(s) have dedicated the work to the public domain under the Creative Commons CC0 "No Rights Reserved" license by waiving all of his or her rights to the work worldwide under copyright law, including all related and neighboring rights, to the extent allowed by law, 2023.

Coniolariella gamsii Causes Poplar Leaf Spot Disease in Xinjiang, China

Populus laurifolia is one of the most valuable tree species in the world and an important silvicultural tree species in the Xinjiang Uygur Autonomous Region, China. In July 2017, an unreported brown leaf spot disease was observed on P. laurifolia in Altay City, Xinjiang. The causal agent of this leaf spot disease was isolated, and Koch’s postulates were performed to confirm its pathogenicity. Based on a morphological characterization and phylogenetic analyses, the causal organism was identified to be a fungal species, Coniolariella gamsii. The optimum mycelial growth conditions for C. gamsii are on PLPDA (Populus leaves potato dextrose agar) medium, at 28 °C, in the dark. The sporulation time when using PLPDA medium (12 days) is much less than that for PDA medium (25 days). Pathogenicity tests revealed that C. gamsii can also infect two other Populus species (P. bolleana and P. tomentosa). This is the first report of C. gamsii causing brown leaf spot disease on P. laurifolia, and the optimum culture and sporulation conditions have also been optimized for the first time. This study provides a theoretical basis for the diagnosis of this disease and the monitoring of the disease’s occurrence and epidemic status.

Characterization of Pseudomonas sp. En3, an Endophytic Bacterium from Poplar Leaf Endosphere with Plant Growth-Promoting Properties

Growth-promoting endophytic bacteria possess substantial potential for sustainable agriculture. Here, we isolated an endophytic bacterium, Pseudomonas sp. En3, from the leaf endosphere of Populus tomentosa and demonstrated its significant growth-promoting effects on both poplar and tomato seedlings. The phosphorus solubilization and nitrogen fixation abilities of strain En3 were confirmed via growth experiments on NBRIP and Ashby media, respectively. Salkowski staining and HPLC-MS/MS confirmed that En3 generated indole-3-acetic acid (IAA). The infiltration of En3 into leaf tissues of multiple plants did not induce discernible disease symptoms, and a successful replication of En3 was observed in both poplar and tobacco leaves. Combining Illumina and Nanopore sequencing data, we elucidated that En3 possesses a circular chromosome of 5.35 Mb, exhibiting an average G + C content of 60.45%. The multi-locus sequence analysis (MLSA) and genome average nucleotide identity (ANI) supported that En3 is a novel species of Pseudomonas and constitutes a distinct phylogenetic branch with P. rhizosphaerae and P. coleopterorum. En3 genome annotation analysis revealed the presence of genes associated with nitrogen fixation, phosphate solubilization, sulfur metabolism, siderophore biosynthesis, synthesis of IAA, and ethylene and salicylic acid modulation. The findings suggest that Pseudomonas sp. En3 exhibits significant potential as a biofertilizer for crop and tree cultivation.

Engineering custom morpho- and chemotypes of Populus for sustainable production of biofuels, bioproducts, and biomaterials.

Humans have been modifying plant traits for thousands of years, first through selection (i.e., domestication) then modern breeding, and in the last 30 years, through biotechnology. These modifications have resulted in increased yield, more efficient agronomic practices, and enhanced quality traits. Precision knowledge of gene regulation and function through high-resolution single-cell omics technologies, coupled with the ability to engineer plant genomes at the DNA sequence, chromatin accessibility, and gene expression levels, can enable engineering of complex and complementary traits at the biosystem level. Populus spp., the primary genetic model system for woody perennials, are among the fastest growing trees in temperate zones and are important for both carbon sequestration and global carbon cycling. Ample genomic and transcriptomic resources for poplar are available including emerging single-cell omics datasets. To expand use of poplar outside of valorization of woody biomass, chassis with novel morphotypes in which stem branching and tree height are modified can be fabricated thereby leading to trees with altered leaf to wood ratios. These morphotypes can then be engineered into customized chemotypes that produce high value biofuels, bioproducts, and biomaterials not only in specific organs but also in a cell-type-specific manner. For example, the recent discovery of triterpene production in poplar leaf trichomes can be exploited using cell-type specific regulatory sequences to synthesize high value terpenes such as the jet fuel precursor bisabolene specifically in the trichomes. By spatially and temporally controlling expression, not only can pools of abundant precursors be exploited but engineered molecules can be sequestered in discrete cell structures in the leaf. The structural diversity of the hemicellulose xylan is a barrier to fully utilizing lignocellulose in biomaterial production and by leveraging cell-type-specific omics data, cell wall composition can be modified in a tailored and targeted specific manner to generate poplar wood with novel chemical features that are amenable for processing or advanced manufacturing. Precision engineering poplar as a multi-purpose sustainable feedstock highlights how genome engineering can be used to re-imagine a crop species.

Spatiotemporal miRNA and transcriptomic network dynamically regulate the developmental and senescence processes of poplar leaves.

Poplar is an important afforestation and urban greening species. Poplar leaf development occurs in stages, from young to mature and then from mature to senescent; these are accompanied by various phenotypic and physiological changes. However, the associated transcriptional regulatory network is relatively unexplored. We first used principal component analysis to classify poplar leaves at different leaf positions into two stages: developmental maturity (the stage of maximum photosynthetic capacity); and the stage when photosynthetic capacity started to decline and gradually changed to senescence. The two stages were then further subdivided into five intervals by gene expression clustering analysis: young leaves, the period of cell genesis and functional differentiation (L1); young leaves, the period of development and initial formation of photosynthetic capacity (L3-L7); the period of maximum photosynthetic capacity of functional leaves (L9-L13); the period of decreasing photosynthetic capacity of functional leaves (L15-L27); and the period of senescent leaves (L29). Using a weighted co-expression gene network analysis of regulatory genes, high-resolution spatiotemporal transcriptional regulatory networks were constructed to reveal the core regulators that regulate leaf development. Spatiotemporal transcriptome data of poplar leaves revealed dynamic changes in genes and miRNAs during leaf development and identified several core regulators of leaf development, such as GRF5 and MYB5. This in-depth analysis of transcriptional regulation during leaf development provides a theoretical basis for exploring the biological basis of the transcriptional regulation of leaf development and the molecular design of breeding for delaying leaf senescence.

Transcriptomic Analysis Revealed That Low-Density Aphid Infestation Temporarily Changes Photosynthesis and Disease Resistance but Persistently Promotes Insect Resistance in Poplar Leaves

Insect infestations cause substantial changes in the leaves they attack, but the effects of insect infestation on photosynthesis and gene expression in the whole infestation period are rarely reported. In this study, the effects of poplar aphid (Chaitophorus populialbae Boyer de Fonscoloube) on photosynthetic rate and gene expression of Populus alba var. pyramidalis were studied, from 2 to 36 days after low-density aphid inoculation (DAI). The results revealed a dynamic change of photosynthesis in poplar after aphid infestation: compensatory increased at 8 DAI, was inhibited at 17 DAI, but repaired after 21 DAI. Aphid infestation promoted the expression of the majority of differentially expressed genes (DEGs) at 4, 6, 8, and 21 DAI. The DEGs were enriched into a plant–pathogen interaction, plant hormone signal transduction, and MAPK signaling pathway, suggesting a significant but transient resistance to disease or other stresses. Photosynthesis-related DEGs were downregulated at 8 DAI, which might result in photosynthetic inhibition at 17 DAI. The expression of flavonoid biosynthesis-related DEGs dynamic changed from all downregulated at 2 DAI to almost all upregulated at 21 DAI, suggesting a persistent resistance to insect infestation. This study reveals dynamic changes in photosynthesis, resistance to pathogens, and insects in poplar leaves after aphid infestation.

Pyrolysis temperature determines the amendment effects of poplar residue‐derived biochars on reducing CO2 emission

AbstractPoplars and their hybrids are widely planted in both plantation forestry and agroforestry systems of the world. Along with the utilization and plantation management processes, a large amount of biomass residues are produced, but the relationship between biochar properties and soil CO2 emissions is largely unknown. Here, a laboratory incubation study was conducted to assess the effects of different biochars and their corresponding biomass residues on soil CO2 emissions during the 180 days of incubation. Poplar residue‐derived biochars were larger in the surface area and total pore volume but lower in nutrients and pH values than the rice straw‐derived biochar. Increasing pyrolysis temperature led to a decrease in the total nitrogen (TN) content of poplar leaf‐ and rice straw‐derived biochars, but enhanced the TN in the poplar twig‐ and poplar bark‐derived biochars. After 180‐day incubation, the total cumulative CO2 emission decreased by 33.1%–73.8% in the biochar amendments compared to their corresponding biomass residue addition, whereas the biochars derived from poplar twig and bark residues had more positive effects on reducing soil CO2 emissions, but depended on the pyrolysis temperature. Correlation analysis showed a significant and positive correlation between the CO2 emissions and TN content of bio‐based materials but the negative relationships to total carbon content and C/N ratio. Meanwhile the positive correlations of CO2 emissions to the surface area, t‐plot micropore area, and volume of the biochars were detected. Our results suggest that application of poplar twig‐ and poplar bark‐derived biochars has a great potential for mitigating global warming.

Green utilization of biomass by-product poplar leaf ash: A novel eco-friendly cementitious material for cement mortar replacement

The use of biomass for power generation is increasing. However, solving the solid biomass waste generated during the combustion process is a challenge. In order to reduce costs and the use of forestry waste, the replacement of cement in cement mortars with the same quality of poplar leaf ash was studied. The present study documents the potential of biomass ash obtained from calcined leaf ash as a supplementary cementitious. By thermogravimetric tests, 20 °C, 310 °C, 470 °C, and 650 °C were selected as the calcination temperatures. The effects of biomass ash on uniaxial compressive strength, crack extension, acoustic emission, and the microstructure of specimens at different curing ages of 7 d and 28 d were investigated. The results show that the strength of specimens mixed with 20 wt% poplar leaf ash is about 60% of cement mortar. The porosity of cement mortar specimens with biomass ash is higher than that of cement mortar. The hydration products of C-S-H and AFt are slightly less than cement mortar. To achieve the same flowability, the water-binder ratio is higher when mixed with biomass ash. As a result, the biomass ash specimens have higher porosity and lower strength. The strength of 310 °C and 470 °C is approximately 8.41% and 4.70% lower than that of 650 °C. The optimum calcination temperature for the pozzolanic activity of poplar leaf biomass ash is 650 ℃. This promotes the efficient use of biomass solid waste and the construction industry is green development.