South Pole-Aitken Impact Research Articles

Evidence of a 4.33 billion year age for the Moon’s South Pole–Aitken basin

AbstractThe Moon’s farside South Pole–Aitken (SPA) basin is the largest and oldest visible impact basin in the inner Solar System. Determining the timing of this catastrophic event is key to understanding the onset of the lunar basin-forming epoch, with implications for understanding the impact bombardment history of the inner Solar System. Despite this, the formation age of the SPA basin remains poorly constrained. Here we show that the chemical composition of the lunar meteorite Northwest Africa 2995 is in good agreement with lithologies exposed within the southern region of the SPA basin. Radiometric dating of a range of mineral and rock components in Northwest Africa 2995 yielded consistent dates of ~4.32–4.33 billion years old. We interpret these dates as the age of SPA basin formation, inferring that this event occurred ~120 million years before the formation of the main cluster of lunar impact basins between ~4.2 Ga and 3.8 Ga. This weakens support for a narrow period of lunar late heavy impact bombardment and also implies that the earliest formed impact basins on the Moon (that is, >4.33–4.5 Ga old) were erased either by the SPA impact itself when its formation caused massive resurfacing of the lunar surface or through other geological processes.

Nature of the lunar far-side samples returned by the Chang'E-6 mission.

The Chang'E-6 (CE-6) mission successfully achieved return of the first samples from the far side of the Moon. The sampling site of CE-6 is located in the South Pole-Aitken (SPA) basin-the largest, deepest and oldest impact basin on the Moon. The 1935.3g of CE-6 lunar samples exhibit distinct characteristics compared with previous lunar samples. This study analyses the physical, mineralogical, petrographic and geochemical properties of CE-6 lunar scooped samples. The CE-6 soil has a significantly lower bulk density (0.983g/cm3) and true density (3.035g/cm3) than the Chang'E-5 (CE-5) samples. The grain size of the CE-6 soil exhibits a bimodal distribution, indicating a mixture of different compositions. Mineralogically, the CE-6 soil consists of 32.6% plagioclase (anorthite and bytownite), 19.7% augite, 10% pigeonite and 3.6% orthopyroxene, and with low content of olivine (0.5%) but high content of amorphous glass (29.4%). Geochemically, the bulk composition of CE-6 soil is rich in Al2O3 (14%) and CaO (12%) but low in FeO (17%), and trace elements of CE-6 soil such as K (∼630ppm), U (0.26ppm), Th (0.92ppm) and rare-earth elements are significantly lower than those of the lunar soils within the Procellarum KREEP Terrane. The local basalts are characterized by low-Ti (TiO2, 5.08%), low-Al (Al2O3 9.85%) and low-K (∼830ppm), features suggesting that the CE-6 soil is a mixture of local basalts and non-basaltic ejecta. The returned CE-6 sample contains diverse lithic fragments, including local mare basalt, breccia, agglutinate, glasses and leucocrate. These local mare basalts document the volcanic history of the lunar far side, while the non-basaltic fragments may offer critical insights into the lunar highland crust, SPA impact melts and potentially the deep lunar mantle, making these samples highly significant for scientific research.

Geological investigation of the lunar Apollo basin: From surface composition to interior structure

The Apollo basin, located in the northeastern part of the South Pole-Aitken (SPA) basin, represents one of the Moon's most significant geological features, offering profound insights into the lunar interior structure, the effects of the SPA impact, and the history of lunar crust evolution. This study presents an in-depth geological analysis of the Apollo basin region, revealing the distribution of rock types and compiling a comprehensive geologic map that correlates with the lithologic and geochemical properties of the area. Utilizing the characteristics and compositional provenance of the geologic units, we have constructed schematic cross-sections that elucidate the interior structure and stratigraphic evolution of the Apollo basin region. Despite excavations of the SPA and Apollo impacts, the anorthositic crust of this area was not entirely removed and has been uplifted to shallow depths, making it more susceptible to exposure by subsequent impacts. Additionally, upper mantle material, characterized by ultramafic, low-Ca pyroxene, was excavated by the SPA impact and is present in the impact melt/breccias of the Apollo basin. After the formation of the Apollo basin, multiple mare units were emplaced over a period potentially spanning ∼1.5 billion years, with the oldest of these maria being superposed by substantial postdating basin ejecta. The results of this study strengthen our understanding of the geology and evolution of the Apollo and SPA basins and offer valuable insights for interpreting the exploration and sample analysis results of the Chang'e-6 mission.

Crustal-mantle layering deposits in the Von Kármán crater, South Pole-Aitken basin

Comprehending the properties of the Moon's crust and mantle materials is essential for decoding its interior. Whether the South Pole-Aitken (SPA) basin potentially excavated the upper mantle materials remains mysterious. The Chang'E Four Lunar Penetrating Radar (LPR) has provided an unprecedented opportunity to investigate the SPA basin in the Von Kármán (VK) crater. Utilizing a data-driven generative deep learning inversion algorithm, the subsurface physical properties along the Yutu-2 path were determined. 4 distinct deposit zones were discovered beneath the surface. All zones feature an upper low-permittivity (paleo-)regolith layer overlaying on a lower high-permittivity layer of rockier ejecta or basal basalt. Zone 1, an ejecta layer from the Finsen crater within the SPA Compositional Anomaly, has a bulk density (2.81±0.22g/cm3) denser than that of highland crust represented by materials originating from VKL and VKL' craters in the Mg-Pyroxene Annulus, which are present in Zones 2 and 3. This suggests the possible presence of mantle materials in Zone 1, providing the first diagnostic evidence that the SPA impact may have penetrated the upper lunar mantle.

The South Pole‐Aitken Basin: Constraints on Impact Excavation, Melt, and Ejecta

AbstractThe formation and evolution of the South Pole‐Aitken (SPA) basin is critical to relating large impact basin formation and modification to lunar geophysical evolution. Most prior models of the SPA impact were conducted in 2D, making it difficult to compare model output to the 3D crustal structure and ejecta distribution. In order to better constrain the parameters of the SPA impactor and the expected post impact distribution of crust and ejecta, we conducted numerical simulations of the SPA impact in 3D. We tested a wide range of impact parameters and constrained model results with recent geophysical data. We found the crustal structure of the SPA basin is best fit by an oblique impact (30–45°) of a 350–400 km diameter projectile impacting at 12–16 km/s. The impact excavated material from as deep as 80–120 km, and ejecta was deposited in a butterfly pattern with a forbidden region uprange of the impact.

Geological context of the Chang’e-6 landing area and implications for sample analysis

Research on returned samples can provide ground truth for the study of the geological evolution history of the Moon. However, previous missions all collected samples from the near side of the Moon, which is significantly different from the far side of the Moon in terms of the thickness of the lunar crust, magma activity, and composition. Therefore, the samples from the far side of the Moon are of great significance for a comprehensive understanding of the history of the Moon. China's Chang'e-6 (CE-6) probe has successfully landed on the lunar far side and will return samples in the coming days. With the precise location of the CE-6 landing site, a detailed analysis of the geological background is conducted in this research. The landing site of CE-6 is within the Apollo crater, which is inside the largest impact basin on the Moon, i.e., the South Pole-Aitken (SPA) basin. According to the numerical simulation of the formation process of the SPA basin, CE-6 landed at the edge of the SPA impact melting zone, which is presumably composed of impact melt of the lunar mantle. The Apollo crater subsequently excavated deep material again, which constitutes the basement of the CE-6 landing area. Later, erupted basalt covered these basement rocks, and they also constitute the main source of the CE-6 samples. Based on the dating method of crater size-frequency distribution, we find that the basalt is ∼2.50 Ga. The CE-6 samples also possibly contain basement rocks as excavated and ejected by craters, and they can provide crucial information for our understanding of lunar geological history along with the basalt samples.

Lunar Farside South Pole‐Aitken Basin Interior: Evidence for More Extensive Central Cryptomaria in the South Pole‐Aitken Compositional Anomaly (SPACA)

AbstractIn the central area of the South Pole‐Aitken (SPA) basin, an intermediate albedo, mafic compositional anomaly (SPA Compositional Anomaly, SPACA) has been documented by previous studies, but its origin remains uncertain. We conducted an investigation of stratigraphic units defined based on morphology and composition and their relative ages, and placed these in the context of basin topography and the observed sequence of geological events, all helping to distinguish between SPACA origins from: (a) SPA impact melt, (b) volcanism induced by the SPA event and (c) lunar cryptomaria. We conclude that SPACA represents extensive traditional cryptomare deposits overlying the SPA impact melt. We interpret the basin center to be filled with cryptomare deposits at least one km thick (>1 × 105 km3 in volume) with ages not younger than Early Imbrian. We attribute the relatively high albedo of SPACA to lateral mixing of ejecta from nearby highlands craters and basins, and conclude that the cryptomaria basalts are likely to be very similar to basalts on the nearside. Our findings imply a 0.5%–1.8% increase in the total volume of global lunar mare and cryptomare deposits. These results show that mare volcanism was common only in areas of thinnest crust on the lunar farside, a factor important in understanding lunar nearside‐farside asymmetries. Despite this significant increase in total cryptomare volume in the SPA basin center, SPA remains underfilled relative to nearside mascon basins. Return of mare basalts from the SPA region by Chang’E‐6 will help determine potential mantle source region differences and petrogenetic pathways.

Radiative Transfer Modeling of Chang’e-4 Spectroscopic Observations and Interpretation of the South Pole-Aitken Compositional Anomaly

Chang’e-4 landed in the Von Kármán basaltic zone affected by Finsen ejecta from the South Pole-Aitken (SPA) “compositional anomaly” (SPACA), providing an opportunity to untangle the origin of the SPACA. We developed a mineral abundance unmixing model and built a spectral library composed of mineral mixtures of plagioclase, low-Ca pyroxene, high-Ca pyroxene, and olivine. Based on the mineral abundances returned by our model, the average plagioclase abundance (60.4 vol.%) of SPACA is beyond the high-plagioclase end of the mineralogical range of SPA impact melt differentiation products and would require an additional contribution from crustal materials. We suggest that either the crust was not entirely removed in the SPA-forming impact or the ejecta from post-SPA basins fed feldspathic materials back onto the SPA basin floor. Our unmixing analyses indicate that the surface regolith of the SPACA is a mixture of 70.2% crustal materials and 29.8% Fe- and incompatible-element-enriched materials.

A South Pole-Aitken impact origin of the lunar compositional asymmetry.

The formation of the largest and most ancient lunar impact basin, South Pole–Aitken (SPA), was a defining event in the Moon’s evolution. Using numerical simulations, we show that widespread mantle heating from the SPA impact can catalyze the formation of the long-lived nearside-farside lunar asymmetry in incompatible elements and surface volcanic deposits, which has remained unexplained since its discovery in the Apollo era. The impact-induced heat drives hemisphere-scale mantle convection, which would sequester Th- and Ti-rich lunar magma ocean cumulates in the nearside hemisphere within a few hundred million years if they remain immediately beneath the lunar crust at the time of the SPA impact. A warm initial upper mantle facilitates generation of a pronounced compositional asymmetry consistent with the observed lunar asymmetry.

Lunar compositional asymmetry explained by mantle overturn following the South Pole–Aitken impact

Lunar compositional asymmetry explained by mantle overturn following the South Pole–Aitken impact

Forsteritic olivine and magnesium-rich orthopyroxene materials measured by Chang'e-4 rover

China's Chang'e-4 probe achieved the first soft landing within the South Pole-Aitken (SPA) basin, which is the oldest, largest, and deepest basin on the lunar farside. The deployed Chang'e-4 rover made in situ spectral measurements along the rover traverse during a nominal three-month mission period. Spectral analyses imply that materials at the Chang'e-4 landing site have a forsteritic olivine (OL) and magnesium (Mg)-rich orthopyroxene (OPX) assemblage in almost equal fractions. The Chang'e-4 rover measured materials, which were essentially mixture of multiple sources, were primarily the weathering products of Finsen crater ejecta. Plagioclase (PLG), which has significant implication for the provenance, is often spectrally transparent or featureless in the wavelength range (450–2395 nm) of the in situ measured spectrum. Depending on the possible absence or presence of abundant PLG, the materials likely originated from a differentiated SPA impact melt pool or from an Mg-suite pluton in the lunar lower crust, and were less likely to originate from the lunar upper mantle.

Geologic History of the Northern Portion of the South Pole‐Aitken Basin on the Moon

AbstractWe conducted a detailed photogeological analysis of the northern portion of the South Pole‐Aitken (SPA) basin (10–60°S, 125–175°W) and compiled a geological map (1:500,000 scale) of this region. Our new absolute model age for the Apollo basin, 3.98 + 0.04/−0.06 Ga, provides a lower age limit for the formation of the SPA basin. Some of the plains units in the study area were formed by distal ejecta from remote craters and basins. The characteristic concentrations of FeO and TiO2 of other plains are indicative of their volcanic origin. The oldest volcanic materials occur near the center of the SPA basin and have an Early Imbrian age of ~3.80 + 0.02/−0.02 Ga. Late Imbrian volcanic activity occurred in and around the Apollo basin. In total, the volcanic plains cover ~8% of the map area and cannot account for the extensive SPA iron signature. The sources of the signature are the oldest materials on the SPA floor (FeO ~11–14.5 wt%). In contrast, the ejecta composing the SPA rim are significantly poorer in FeO (<7.5 wt%). The signature could be related to the differentiation of the SPA impact melt. However, the spatial segregation of the ancient iron‐rich and iron‐poor materials suggests that the SPA iron signature predated the basin. Thus, the signature might be explained by a pre‐SPA lunar crust that was stratified with respect to the iron concentrations, so that the SPA impact excavated the upper, iron‐poorer portion of the crust to form the SPA rim and exposed the deeper, iron‐richer portion on the floor of the basin.

Evidence of impact melt sheet differentiation of the lunar South Pole‐Aitken basin

AbstractThe South Pole‐Aitken (SPA) basin is the largest basin on the Moon. The basin‐forming impact likely melted the upper part of the mantle and formed an impact melt sheet. Impact melt of large terrestrial craters differentiated following a general magmatic differentiation sequence. However, it is still debated whether or not the SPA melt sheet underwent differentiation. To address this, we investigated the vertical and lateral variations in mineral composition of the SPA impact melt sheet area by analyzing the surface mineralogy including 277 post‐SPA craters using remote sensing reflectance data. We identified a 7 km thick, high‐Ca pyroxene‐rich layer and below that, a >8 km thick, low‐Ca pyroxene‐rich layer. Both filled the entire impact melt sheet area (630 km in diameter). Considering the vast distribution of these two layers, their thicknesses, their FeO abundances (around 13.5 wt %), which are lower than most of the lunar mare basalt but within the estimated range of the differentiated SPA impact melt, and that the observed lithologies are consistent with a differentiation model, we conclude that the SPA impact melt was differentiated. Moreover, based on the lunar magma ocean differentiation model, Al2O3 and CaO abundances of the upper part of the mantle would be much lower after the mantle overturn. If the SPA impact occurred after overturn, these elemental abundances of the initial impact melt would be much lower than that of the before‐overturn impact case and result in different solidified layers. Our observation matches only the after‐overturn case, which may imply that the SPA impact occurred after overturn.

Magnetization in the South Pole-Aitken basin: Implications for the lunar dynamo and true polar wander

A number of magnetic anomalies are present along the northern edge of the lunar South Pole-Aitken (SPA) basin. A variety of hypotheses for their formation have been proposed, but an in-depth study of their properties has not been performed. Here we use two different methods to invert for their source body characteristics: one that completely searches a small parameter space of less than ten uniform-strength dipoles per anomaly, and another that uses grids of hundreds of dipoles with variable magnetization strengths. Both methods assume uniform magnetization directions at each anomaly and with one exception, produce nearly the same results. We introduce new Monte Carlo methods to quantify errors in our inversions arising from Gaussian time-dependent changes in the external field and the uncertain geometry of the source bodies. We find the errors from uncertainty in source body geometry are almost always higher. We also find a diverse set of magnetization directions around SPA, which we combine with other physical arguments to conclude that the source bodies were likely magnetized in a dynamo field. Igneous intrusions are a reasonable explanation (Purucker et al., 2012) for the directional variability, since they could be intruded over different magnetic epochs. However, the directional variability also implies either surprisingly large amounts of true polar wander or a dynamo not aligned with the lunar spin axis. We also explore the possibility that true polar wander caused by the SPA impact could allow iron-rich SPA ejecta to record a diverse set of magnetic field directions. Some of this material may have also become “sesquinary” ejecta and re-impacted across the Moon on 104–106 year timescales to capture such changes. No completely satisfactory answer emerges, except that the dipole-axis of the lunar dynamo may have been variable in direction.

Potential sample sites for South Pole–Aitken basin impact melt within the Schrödinger basin

Determining the age of the South Pole–Aitken (SPA) basin ranks among the highest priorities in lunar science. This datum would constrain the timing of the oldest and largest basin-forming event on the Moon, information that is essential to any evaluation of the collisional evolution of the early Solar System. To locate material that preserves the age of SPA, a geochemical model of SPA impact melt is integrated with chemical and mineralogical analyses of the lunar surface determined from orbit. Results suggest the southern wall of Schrödinger basin contains material with the mineralogical and geochemical signatures of SPA melt and, thus, represents a candidate destination for sampling material that can constrain the age of the SPA impact.

Differentiation of the South Pole–Aitken basin impact melt sheet: Implications for lunar exploration

AbstractWe modeled the differentiation of the South Pole–Aitken (SPA) impact melt sheet to determine whether noritic lithologies observed within SPA formed as a result of the impact. Results indicate differentiation of SPA impact melt can produce noritic layers that may accommodate observed surface compositions but only in specific scenarios. One of nine modeled impact melt compositions yielded layers of noritic materials that account for observations of noritic lithologies at depths of ~6 km. In this scenario, impact occurred before a hypothesized lunar magma ocean cumulate overturn. The 50 km deep melt sheet would have formed an insulating quenched layer at the surface before differentiating. The uppermost differentiated layers in this scenario have FeO and TiO2contents consistent with orbital observations if they were subsequently mixed with the uppermost quenched melt layer and with less FeO‐ and TiO2‐enriched materials such as ejecta emplaced during younger impacts. These results verify that noritic lithologies observed within SPA could have formed as a direct result of the impact. Therefore, locations within SPA that contain noritic materials represent potential destinations for collecting samples that can be analyzed to determine the age of the SPA impact. Potential destinations include central peaks of Bhabha, Bose, Finsen, and Antoniadi craters, as well as walls of Leibnitz and Schrödinger basins. Additionally, potential remnants of the uppermost quenched melt may be preserved in gabbroic material exposed in “Mafic Mound.” Exploring and sampling these locations can constrain the absolute age of SPA, a task that ranks among the highest priorities in lunar science.

A multispectral geological study of the Schrödinger impact basin

Schrödinger basin is a well-preserved peak-ring basin located on the lunar farside, along the rim of the much larger South Pole – Aitken (SPA) basin. The relatively young age (Lower Imbrian series, or 3.8 Ga) of this basin makes it an ideal site to study the geology of peak-ring basins in general, and the geological history of SPA specifically. Impact materials still recognizable include a well-defined crater rim, wall terraces, quasi-circular peak ring, and interior and exterior melt units. A small pyroclastic deposit fills a portion of the basin floor, along with several mare patches. This study uses Clementine multispectral ultraviolet–visible (UV–VIS) data, and a limited set of higher spectral resolution Chandrayaan-1 Moon Mineralogy Mapper (M3) data, as well as radar, camera, and topography data from the Lunar Reconnaissance Orbiter to better understand Schrödinger’s geology. Sampled spectral profiles and linear unmixing models applied to the Clementine data indicate there is a heterogeneous distribution of both anorthositic and basaltic materials in the crater floor. M3 data further validates this observation, and the high spectral resolution shows that most of the mafic content is dominated by pyroxene. These results challenge the traditional assumption that Schrödinger was formed in mostly highland terrain. Our assessment brings forth a new understanding regarding the placement of Schrödinger within SPA and the role SPA impact materials played in shaping the composition of Schrödinger.

The South Pole-Aitken basin region, Moon: GIS-based geologic investigation using Kaguya elemental information

Using Geographic Information Systems (GIS), we performed comparative analysis among stratigraphic information and the Kaguya (SELENE) GRS data of the ∼2500-km-diameter South Pole-Aitken (SPA) basin and its surroundings. Results indicate that the surface rock materials (including ancient crater materials, mare basalts, and possible SPA impact melt) are average to slightly elevated in K and Th with respect to the rest of the Moon. Also, this study demonstrates that K and Th have not significantly changed since the formation of SPA. The elemental signatures of the impact basin of Fe, Ti, Si, O through time include evidence for resurfacing by ejecta materials and late-stage volcanism. The oldest surfaces of SPA are found to be oxygen-depleted during the heavy bombardment period relative to later stages of geologic development, followed by both an increase in silicon and oxygen, possibly due to ejecta sourced from outside of SPA, and subsequent modification due to mare basaltic volcanism, which increased iron and titanium within SPA. The influence of the distinct geologic history of SPA and surroundings on the mineralogic and elemental abundances is evident as shown in our investigation.

Thorium abundances of basalt ponds in South Pole-Aitken basin: Insights into the composition and evolution of the far side lunar mantle

[1] Imbrian-aged basalt ponds, located on the floor of South Pole-Aitken (SPA) basin, are used to provide constraints on the composition and evolution of the far side lunar mantle. We use forward modeling of the Lunar Prospector Gamma Ray Spectrometer thorium data, to suggest that at least five different and distinct portions of the far side lunar mantle contain little or no thorium as of the Imbrian Period. We also use spatial correlations between local thorium enhancements and nonmare material on top of the basalt ponds to support previous assertions that lower crustal materials exposed in SPA basin have elevated thorium abundances, consistent with noritic to gabbronoritic lithologies. We suggest that the lower crust on the far side of the Moon experienced multiple intrusions of thorium-rich basaltic magmas, prior to the formation of SPA basin. The fact that many of the ponds on the lunar far side have elevated titanium abundances indicates that the far side of the Moon experienced extensive fractional crystallization that likely led to the formation of a KREEP-like component. However, because the Imbrian-aged basalts contain no signs of elevated thorium, we propose that the SPA impact event triggered the transport of a KREEP-like component from the lunar far side and concentrated it on the nearside of the Moon. Because of the correlation between basaltic ponds and basins within SPA, we suggest that Imbrian-aged basaltic volcanism on the far side of the Moon was driven by basin-induced decompressional melting.