Power Supply Source Research Articles

Energy Community Resilience Improvement Through a Storage System

Energy communities serve as vital stakeholders within contemporary power grids. Nevertheless, managing these communities presents formidable challenges, owing to the intricate nature of the task, the presence of uncertainties, and competing objectives. This paper aims to demonstrate the positive impact of incorporating a storage system into an energy community, ensuring the welfare of every community member during grid malfunctions. The research investigates two separate energy communities, considering both uncontrollable and controllable devices within individual households as consumption sources, in addition to power supply sources like PV systems installed in community residences, as well as power derived from the main grid or the storage system.

Design and application of portable eddy current inspection device for thimble tubes of nuclear power plant

Abstract The Thimble tube is an important piece of equipment in the nuclear power plant; its role is to provide a neutron flux detector with a channel for the reactor fuel assembly. Eddy current detection is the main way to evaluate and track the wear of the thimble tube. In order to conduct more efficient detection of the thimble tube, this paper has carried out a series of studies on the mechanical device of the eddy current detection of the thimble tube and the software control system. The inspection system is compact, portable, and does not require an external power supply or gas source, making it easy to carry and operate. It is well-suited for promotion in various nuclear power plants.

Enzymatic biofuel cells-based self-powered electrochemical biosensor for detection of 17β-estradiol based on dual-enzyme cascade amplification and bioconjugate

Self-powered electrochemical biosensors (SPEB) based on enzymatic biofuel cells (EBFC) have garnered significant attention due to their distinctive characteristic of not necessitating the source of external power supply. This study developed a novel EBFC-based SPEB by incorporating dual-enzyme cascade amplification and bioconjugate for extremely precise detection of 17β-estradiol (E2). The carbon nanocages/gold nanoparticles composite was employed as substrate to immobilize bilirubin oxidase (BOD) and complementary ssDNA (csDNA) to form bioconjugate. The carbon nanotubes/gold nanoparticles composite was used in the EBFC device as the electrode material, through which glucose oxidase (GOD) and E2 aptamer were wired to form the bioanode and biocathode, respectively. The biocathode further linked with bioconjugate via a hybridization reaction between E2 aptamer and csDNA. The bioconjugate integrates the recognition and signal probes for homogeneous electrochemical assay of targets, which released from biocathode once the target E2 was recognized and hindered the transfer of electrons produced by GOD on bioanode. Thus, the open-circuit voltage (EOCV) of the EBFC-based SPEB dramatically decreased, exhibiting exceptional sensitivity for the detection of E2 over a concentration range from 10 pg mL−1 to 20 ng mL−1, with a detection limit of 3.3 pg mL−1 (S/N = 3). Furthermore, the prepared EBFC-based SPEB showed significant potential for implementation as a viable prototype for a mobile and an on-site bioassay system in food and environmental safety applications.

Preparation and Electrical Performance Analysis of a GaAs‐Based Tritium Battery

A nuclear battery is a promising candidate for small power supply sources in the military and commercial fields, but its output power and energy conversion efficiency need to be improved. This paper mainly describes a design, preparation, and electrical performance analysis of a GaAs-based tritium battery. The design of the tritium battery uses a multistage process with Monte Carlo and Matlab simulations. A titanium tritide source was prepared by a high-temperature tritium absorption device, and a GaAs semiconductor transducer was developed using a metal-organic chemical vapor deposition method. The D/Ti ratio and T/Ti ratio of the deuterium/tritium titanium films were 1.9 and 1.7, respectively. Two kinds of GaAs-based PIN junction semiconductor transducers were proposed and irradiated with the prepared tritium source. Their electrical properties were measured in situ and analyzed qualitatively. Under the irradiation of a 0.61-Ci tritium source, the short-circuit current of the device was 0.3 to 0.38 μA, the open-circuit voltage was 35 to 63 mV, the peak power was 2.8 to 6.4 nW, and the energy conversion efficiency of the GaAs semiconductor transducer was about 1.86%. It was found that an air gap between the GaAs semiconductor transducer and the radioactive source caused serious loss of beta particle energy, resulting in low output power and low energy conversion efficiency of the nuclear battery. The open-circuit voltage of the devices with a SiO2 passivation layer on the surface decreased both in a dark environment and in light illumination, but SiO2 passivation did not reduce surface recombination as expected. The research work in this paper will provide some valuable reference for the preparation and performance optimization of nuclear batteries.

Load Flow Analysis of 10-Bus Test System

The importance of power flow analysis can’t be overstated. In the field of electrical power engineering, it is critical for both the utility and the consumer to understand a variety of electrical variables such as voltages and power flows inside power systems. This paper effectively applies Power World Simulator software to perform load flow analysis on a typical power system. The results may be applied to a much more complicated system with many loads and a range of power supply sources.

Characterization and risk assessment of polycyclic aromatic hydrocarbons from the emission of different power generator

Epileptic power supply in Sub-Saharan countries of Africa has warranted the use of power generators as an alternative source of power supply. Exhaust emission from these generators is associated with Polycyclic Aromatic Hydrocarbon (PAHs). Hence, this study focused on the determination of levels of PAHs in the emission of different brands of power generators used in Nigeria. Exhaust emissions of different power generators were sampled using a filter-sorbent sampling system with polyurethane foam (PUF) as an adsorbent material. Analysis of PAHs was carried out using a Gas Chromatograph coupled to a mass selective detector (GC- MS) operated on Electron Ionization (EI) mode. The results showed the ∑ PAHs range 14.91–26.0 μgm−3. Bap was the most abundant of all the compounds with a concentration of 2.6 μgm−3 with a range of 2.08–3.07 μgm−3. The Incremental Life Cancer Risk (ILCR) values of all the generator's emission sampled are higher than 10− 4 for both children and adult which indicate a high potential cancer risk from inhalation of emission from these generators while Hazard Quotient (HQ) values from all the power generating set in this study are all above 1 which indicated high associated non-carcinogenic. The study revealed the levels of PAHs associated with the emission of power generators in Nigeria.

Self-Powered and Self-Recoverable Multimodal Force Sensors Based on Trap State and Interfacial Electron Transfer.

Multi-dimensional force sensing that combines intensity, location, area and the like could gather a wealth of information from mechanical stimuli. Developing materials with force-induced optical and electrical dual responses would provide unique opportunities to multi-dimensional force sensing, with electrical signals quantifying the force amplitude and the luminescence output providing spatial distribution of force. However, the reliance on external power supply and high-energy excitation source brings significant challenges to the applicability of multi-dimensional force sensors. Here we reported the mechanical energy-driven and sunlight-activated materials with force-induced dual responses, and investigated the underlying mechanisms of self-sustainable force sensing. Theoretical analysis and experimental data unraveled that trap-controlled luminescence and interfacial electron transfer play a major role in force-induced optical and electrical output. These materials were manufactured into pressure sensor with renewable dual-mode output for quantifying and visualization of pressures by electrical and optical output, respectively, without power supply and high-energy irradiation. The quantification of tactile sensation and stimuli localization of mice highlighted the multi-dimensional sensing ability of the sensor. Overall, this self-powered pressure sensor with multimodal output provides more modalities of force sensing, poised to change the way that intelligent devices sense with the world.

Building Characteristics and Incompatible Land Uses as Drivers of Fire Disaster Risk

Risk-based land use planning is regarded as a controlling tool for reducing environmental disasters in urban settlements. However, unsustainable land use practices allow building and infrastructural developments in fire disaster-risk areas. Losses to urban fires are largely dependent on building and land use characteristics across settlements. This paper examines the underlying characteristics that increase fire risks in urban buildings by analyzing the relationship between land use patterns, types of building use, and fire disaster risk in the metropolitan area of Ibadan, Nigeria. Data were collected through a field survey using a structured questionnaire supplemented by focus group discussion. A multistage sampling procedure was used to select 88 neighborhoods and 1,803 building occupants were selected using systematic random sampling. Findings indicate incompatible land use developments in many areas of the city. The study revealed that one out of five buildings were not accessible to fire-fighting vehicles owing to inadequate road widths (43.7%) and pot-holes (39.8%). One out of seven buildings (14.1%) had no water supply. About 10% of the buildings had emergency doors on permanent lock. About half of the building occupants relied on power supply sources that increased risks of fire occurrence (52%) and 49.4% used unsustainable waste disposal methods that threatened fire safety. The paper concluded that land use attributes, such as accessibility, compatibility of uses, water supply sources, sources of electricity supply and solid waste disposal method, and building characteristics, such as burglar proofs, nature of entrance/exit, type of lighting fuel are factors that are relevant in fire disaster risk analysis.

Smart IoT Approach for Renewable Energy Monitoring System

Numerous factories, commercial establishments, and private residences require an uninterrupted power supply. The primary source of this supply is often the grid. Industries, businesses, and residential areas needing 24-hour power inevitably require backup systems to ensure continuous operation of essential electronic devices. Typically, diesel generators are employed as backup power sources, utilizing diesel oil to generate electrical energy. While this approach has been successfully employed for many years, it carries a significant drawback. Diesel oil falls under the category of non-renewable energy sources, unable to be regenerated and requiring an extensive period for renewal. Furthermore, diesel generators emit substantial amounts of carbon dioxide into the atmosphere, contributing to air pollution in the vicinity. To address these challenges, a prototype implementing a smart Internet of Things (IoT) approach has been developed. This study introduces the utilization of an Arduino Nano microcontroller, allowing users to control their power supply source, choosing between the grid, solar panels, or water generation. This control process is facilitated through a smartphone application, granting users the ability to manage it remotely, enhancing monitoring capabilities. The system incorporates two environmentally friendly power sources: solar panels and a mini water turbine, both considered safe for ecological balance. The outcomes of this research demonstrate that users can effectively utilize the generated electricity supply for approximately 12 hours, thereby reducing reliance on the grid and harnessing the potential of renewable energy sources.

Research on the Mechanism and Preventive Measures of Heat Transfer and Coking in Boilers

Boilers are one of the most important power supply sources in the chemical industry. The irreplaceable nature of its products requires boilers to maintain stable long-cycle operation during the production process. However, boiler failures occur from time to time and necessary measures need to be taken to reduce the chances of failure. Among these failures, metal corrosion and tube failures are particularly prominent. Due to the fact that the thermal calculation results do not match the actual; the coefficients in the design are not reasonably selected, and the hearth and boiler shape are not properly selected; the structural design of the superheater system and the arrangement of the heated surface are not reasonable; and the wall temperature calculation method is not perfect, which leads to the improper selection of materials and so on. These will make the fire-side heat exchange system produce wall temperature super-high, tube bundle burst and other failure phenomena. These phenomena cause a certain degree of hidden danger to the safe production of the boiler.

Influence of the Supply Voltage Variation on the Conducted Emission in the Frequency Range up to 150 kHz Injected into the Power Grid by CFL and LED Lamps—Case Study

In normal operating conditions, the mains voltage level provided by low-voltage distribution networks follows time-varying patterns within permissible limits. The statistical characterisation of disturbances inserted into the power grid by nonlinear electrical devices is useful since operators are able to establish power quality limits and assess the residual capacity of networks for new smart installations, which may include a multitude of power electronic devices. Existing standards related to emission tests recommend using a power supply source in the measurement circuit with a nominal voltage parameter. However, the range of permissible variations of relevant supply voltage parameters may have an impact on conducted emissions. It can also be considered that the symptoms of supply voltage variations may manifest themselves differently depending on the equipment’s architecture and also the range of frequency observation with reference to harmonics and supraharmonics. The purpose of this study is to measure and analyze non-intentional conducted emissions injected into the power grid by lighting devices, methodically, by numbers of studies under different supply voltage conditions within two frequency bands. The emission is evaluated separately in two ranges: up to 2 kHz and 9-150 kHz. Obtained results show that the level of conducted emission introduced into the low voltage network by modern lighting sources like fluorescent and LED lamps varies with the supply voltage level compared to the emission generated in the nominal voltage level condition. Additionally, in the case of a spectrum of higher frequencies, some trends of shifting of the characteristic frequency bands are recorded. The potential of the obtained results is to complement the knowledge of the emission of modern lighting sources, which can be further used for digital models of these devices and to estimate the impact on the grid under real working conditions.

Performance Analysis of Positive Output (P/O) Push-Pull Switched Capacitor Converter for High Power Density Applications

The micro-power-consumption technique requires high power density DC/ DC converters and power supply sources. In this research, a PI and Fuzzy Logic Controllers for an elementary circuit of positive output (P/O) push-pull switched capacitor converter has developed for high power density applications with high sustainability under enormous line and load disturbances. The voltage lift technique is a popular application in electronic circuit design. The power converter performs DC-DC step-up voltage conversion with high efficiency, high power density and cheap topology in a simple structure. The proposed converter combines both switched-capacitor and voltage lift techniques. Referable to the time varying and switching nature of the power electronic converter their dynamic behavior becomes highly nonlinear. Conventional controllers are incapable of providing excellent dynamic performance and hence the fuzzy logic controller can be used as a feed forward controller for controlling power electronic converters. The control algorithm is developed to ensure tracking of the reference voltage and rejection of system disturbances by successive measurements of the converter output voltage at certain time instants within a conduction period. The simulation of PI and Fuzzy logic controls have been carried out using MATLAB/Simulink software to evaluate the controller’s performances. Keywords: Luo converter, DCDC converter, PI Controller, Fuzzy Controller.

1-out-of-n standby systems with storages and activation moment-dependent component operation time limit

This paper pioneers the modeling and optimization of a 1-out-of-n standby system with a required mission time and non-identical components, whose operation times are limited and dependent on their activation time and dynamic resource supply and storage units. Each component contains a main operating unit characterized by certain time-to-failure distribution and mode-dependent resource demands, a resource generator characterized by a time-varying resource generation rate, and a storage unit characterized by an initial amount of resource and the maximum capacity. The resource generator and storage interact collaboratively to supply the dynamic resource demand of the main unit. Based on an event transition probabilistic model, a new numerical algorithm is proposed for assessing the mission success probability (MSP) of the considered standby system. An optimization problem is further formulated and solved, which determines the activation sequence of standby components maximizing the MSP. A detailed case study of a standby sensor system with the photo-voltaic power supply source and battery storage is provided to demonstrate the proposed model and examine the effects of several system parameters on the MSP and optimization solutions. Several useful findings related to the MSP improvement are revealed from the case study.

Diffusion flame, heated quartz tube or dielectric barrier discharge? Comparing the resistance of hydride atomizers towards interferences with detection by atomic absorption spectrometry

The resistance of three types of hydride atomizers towards interferences from other hydride forming elements and mercury was comprehensively investigated. Four hydride forming elements (Pb, Bi, Se and Te) were used as model analytes while seven hydride forming elements and mercury were investigated as potential interferents. The atomizers studied were based on a diffusion flame - DF, an externally heated quartz tube (multi)atomizer - (MM)QTA as well as a dielectric barrier discharge plasma - DBD. The performance of even two designs of DBD atomizers was compared. The first configuration (REF-SIN) was realized by a DBD chamber with glued electrodes coupled to a power supply source with sinusoidal modulation of high voltage. The second configuration of the DBD atomizer (SE-SW) comprised of a DBD chamber with the sputtered electrodes powered by a square-wave modulated high voltage source. The DF atomizer was found to be the most robust towards atomization interferences. However, its sensitivity was 30 to 50 times lower compared to (MM)QTA and DBD based atomizers due to its short optical path. The DBD atomizer in REF-SIN arrangement can compete very well with (MM)QTA atomizer in terms of resistence to interferences as well as sensitivity. The resistence of DBD atomizer in SE-SW configuration towards atomization interferences is slightly worse compared to (MM)QTA and DBD in REF-SIN design.

Students’ use and assessment of Plateau State University Library, Bokkos

This paper focuses on use and assessment of various resources and facilities of the Plateau State University Library, Bokkos. The research was guided by seventeen objectives. A survey research design was the research method adopted in the investigation. The target population for the research was all the 499 students in the Faculty of Natural and Applied Sciences that were on ground in 2022/2023 academic session. Since the population was manageable, there was no sampling. Hence, all the subjects were adopted in the research. The instrument used in the data collection was questionnaire. Data collected were analyzed using simple statistics such as frequency counts and percentages, and tables were presented were necessary. The findings of the research revealed among others that the major issues associated with the poor patronage of the Plateau State University Library, Bokkos by the students of the institution were as follows: lack of enough textbooks and journals; collection contain so many outdated textbooks that were irrelevant to the student‟s needs; library‟s catalogue was in disarray; lack of stable source of electric power supply; and inconsistent internet connections with very low internet bandwidth. It was therefore, recommended among others that the library management should acquire more current text books and journals in both hard and soft copies and the university‟s lecturers (users) should be involved in the selection of the library‟s resources for acquisition in order to improve the quality / relevancy of the library‟s collection; there is an urgent need to reorganize the library‟s catalogue to reflect the library‟s collection; the university management should provide a constant source of electric power supply to the library; Internet connectivity should be made available all the time and internet bandwidth should be 4increased to reduce the time it takes to gain access into the internet databases in the library. The research then concluded that the Plateau State University library was bedeviled with so many factors that had inhibited the effective utilization of its resources and facilities by students. Hence, students avoided the patronage of the library‟s resources and facilities. However, it was believed that with proper funding, commitment of university and library managements and careful implementation of the recommendations noted in this research, the resources and facilities of the library will be greatly improved and the patronage of the library by students will subsequently improve.

Determination of optimal dimensions of hybrid AC/DC distributed generation system with renewable sources for autonomous power supply of remote locations

In this paper, an autonomous hybrid power system with direct voltage and alternating voltage busbars with connected renewable sources and traditional sources that support renewable sources in the demand coverage during periods of power shortage in the system is proposed for power supply of remote locations. The issues of synthesis of the optimal structure of an autonomous system consisting of PV and WT generators with an integrated system of electric energy batteries (EEB) and diesel- generator station, at which the high reliability of power supply in remote areas is provided, are being studied. To optimally determine the installed capacity of the elements of the PV–WT–EEB–DG hybrid system, a machine learning algorithm (TLBO) is proposed, by means of which, based on the proposed multi-objective function, the most advantageous values of unit powers for PV and WT stations are determined, as well as the number of batteries and diesel generators that ensure the demand coverage in the hybrid system under various options for PV and WT generation shortage.In order to improve the efficiency of solving the optimization problem taking into account the variability of meteorological conditions, manifested in random and uncertain variability of PV and WT generation, as well as in the stochastic nature of the electricity consumption process, the studies on clustering these processes and determining typical scenarios for an array of hourly measurements of PV, WT and load generation during the year were carried out in the paper. Using the k–means approach, the numbers of clusters for PV, WT and load for typical geographic regions are determined. The results of the analysis of the optimal compositions of the hybrid AC-DS system in the PV, WT, BEE, DG in these regions are presented.

Battery Energy Storage System Placement And Sizing In Distribution Networks

The article discusses the methodology for selecting installation locations and parameters of battery energy storage systems (BESS) in electrical distribution networks. The methodology is applicable to BESS which implement the functions of ensuring the reliability of power supply to consumers (use of BESS as a backup or emergency source of power supply), as well as the function of regulating voltage levels in the electrical network (regulating reactive power by the BESS inverter).

Sustainable Manufacturing Practices: Evaluating the Environmental Benefits of Biodegradable Polymers and Recycled Metals

Among all industries looking for economic development and environmental responsibility, sustainable manufacturing has gained popularity worldwide. This study reviews how biodegradable polymers and recycled metals can be utilized to encourage sustainable manufacturing. In reality, biodegradable polymers are made from renewable materials such as starch or cellulose; hence they can be utilized rather than common plastics and they can avoid contamination caused by non-disposable polymers while at the same time improving resource productivity. Biodegradable polymers have found various applications in packaging, agriculture, and pharm sectors where they contribute towards sustainable product advancement through their potential to break down under certain conditions ensuring that no waste remains behind after usage. On the other hand, recycled metals are significant for accomplishing circularity in manufacturing systems and bringing down the natural impacts related to different stages of manufacturing processes. Recycled metals offer assistance to save natural resources, reduce energy utilization, and lower the amount of GHGs produced by mining and refining virgin ore. For sustainable manufacturing, this paper highlights participation as well as development and technology integration among other things. For instance; making eco-friendly materials may be one such activity while digitalizing production processes can be another great thought for improving environmental sustainability in the manufacturing sector. Moreover, this paper suggests a few areas that can foster greater natural protection amid production activities like switching over renewable sources of power supply for energy usage. These actions will not only guarantee economic development but also protect our environment because somehow they are interrelated to each other.

Защита электрогенераторов объектов распределенной генерации от аварийных режимов

Distributed generation is a good solution for areas remote from centralized power supply sources as it helps increase the reliability of consumer operation. Distributed generation power supply systems use renewable sources of electricity, diesel generators and gasoline generators in the form of mobile power stations, which in most cases are not equipped with modern means of protection. This study presents an analysis of existing means of protecting electric generators from abnormal and emergency operating conditions, including voltage asymmetry, which is one of the factors reducing the service life of generators and is typical for rural electrical networks. During the analysis, the authors determined the main types of generator protection against emergency operation modes: protection of stator windings, protection against underfrequency and overfrequency, protection against undervoltage and overvoltage, protection against voltage (current) asymmetry. It is noted that the main cause of voltage asymmetry leading to mechanical vibration and rapid overheating of the rotor is single-phase loads in the system, which are unevenly distributed over three phases. The problem of voltage asymmetry is mainly solved by redistributing loads in transmission lines and/or installing compensating devices. However, in rural power supply systems, unbalanced load distribution is rarely corrected. The voltage asymmetry can be compensated through the use of hybrid active power filters of series compensation and improved control methods of these filters. Voltage converters that are effective in equalizing voltage asymmetry in PV systems can effectively protect small capacity diesel power generators provided that the use of additional equipment is economically viable.

Subsonic Wind Tunnels Air Speed Control Devices Base on Arduino Controller

This study discusses the process of making an airspeed control device for wind tunnels using Arduino as the main component of the controller unit. Wind tunnel testing is carried out at varying airspeeds to obtain optimal results. The fan motor is not equipped with an air speed controller as an airflow generator. This research aims to make a tool that can control wind tunnel airspeed according to the testing needs. This research was conducted using the research and development method. The power supply voltage output is set at 11.19 Volts as the Arduino voltage source, and for other components such as LCDs, servo motors, relay modules, and anemometer sensors supplied from the Arduino mainboard plus and arranged in parallel with the power supply source reduced using a stepdown to 5.069 Volts. This subsonic wind tunnel's airflow speed control device can regulate the speed from 10 m/s to 13 m/s stably. This speed meets the requirements of a subsonic wind tunnel and can be used to visualize the airflow in the wind tunnel.