Sound Field Analysis Research Articles

Framework of acoustic analysis and shape optimization for three-dimensional doubly periodic multilayered structures

In this research, a framework of acoustic analysis and shape optimization, based on isogeometric boundary element method (IGA-BEM), is proposed for three-dimensional doubly periodic multilayered structures. The study addresses a gap in the literature by focusing on the shape optimization of such structures, which has not been extensively explored previously. The interface between different acoustic media is an infinite doubly periodic surface, which can be constructed by an open non-uniform rational B-splines. A periodic IGA-BEM is developed for the sound field analysis of the doubly periodic multilayered structure, in which the Ewald method is used to accelerate the calculation of periodic Green function. Furthermore, the shape derivative of the doubly periodic multiple boundaries is derived by imposing boundary perturbation and using the adjoint variable method. The control points of the NURBS surfaces are defined as the shape design variables, and all shape sensitivities can be quickly calculated by discretizing the shape derivative formula. Finally, in according with shape sensitivities, the corresponding shape optimization problem is solved by the method of moving asymptotes, so that the optimized shape design can be obtained. A series of numerical examples validates the accuracy and applicability of the proposed approaches.

Optimal sensor placement for the spatial reconstruction of sound fields

The estimation sound fields over space is of interest in sound field control and analysis, spatial audio, room acoustics and virtual reality. Sound fields can be estimated from a number of measurements distributed over space yet this remains a challenging problem due to the large experimental effort required. In this work we investigate sensor distributions that are optimal to estimate sound fields. Such optimization is valuable as it can greatly reduce the number of measurements required. The sensor positions are optimized with respect to the parameters describing a sound field, or the pressure reconstructed at the area of interest, by finding the positions that minimize the Bayesian Cramér-Rao bound (BCRB). The optimized distributions are investigated in a numerical study as well as with measured room impulse responses. We observe a reduction in the number of measurements of approximately 50% when the sensor positions are optimized for reconstructing the sound field when compared with random distributions. The results indicate that optimizing the sensors positions is also valuable when the vector of parameters is sparse, specially compared with random sensor distributions, which are often adopted in sparse array processing in acoustics.

Enhancing Ultrasound Power Transfer: Efficiency, Acoustics, and Future Directions.

Implantable medical devices (IMDs), like pacemakers regulating heart rhythm or deep brain stimulators treating neurological disorders, revolutionize healthcare. However, limited battery life necessitates frequent surgeries for replacements. Ultrasound power transfer (UPT) emerges as a promising solution for sustainable IMD operation. Current research prioritizes implantable materials, with less emphasis on sound field analysis and maximizing energy transfer during wireless power delivery. This review addresses this gap. A comprehensive analysis of UPT technology, examining cutting-edge system designs, particularly in power supply and efficiency is provided. The review critically examines existing efficiency models, summarizing the key parameters influencing energy transmission in UPT systems. For the first time, an energy flow diagram of a general UPT system is proposed to offer insights into the overall functioning. Additionally, the review explores the development stages of UPT technology, showcasing representative designs and applications. The remaining challenges, future directions, and exciting opportunities associated with UPT are discussed. By highlighting the importance of sustainable IMDs with advanced functions like biosensing and closed-loop drug delivery, as well as UPT's potential, this review aims to inspire further research and advancements in this promising field.

Investigation of Valve Seat Cone Angle on Small Opening Direct-Acting Relief Valve Cavitation Noise

Direct-acting relief valves are important pressure-control components in hydraulic systems; however, noise problems are now common. This study aimed to reduce and numerically analyze the valve cavitation and noise using the Zwart–Gerber–Belamri (ZBG) model with the Ffowcs Williams and Hawkings (FW–H) model to optimize the design based on the sound field perspective. First, a direct-acting relief valve flow field model was established to determine the relationship between the seat structure and the degree of cavitation through a CFD (Computational Fluid Dynamics) simulation. Second, sound field analysis was conducted based on the cavitation and non-cavitation flow fields, respectively, and the resulting noise levels were compared. Finally, prototypes of the relief valve were manufactured, and noise levels between the original and optimized valves were compared. The results revealed that cavitation within the relief valve generated noise while optimizing the valve seat cone angle suppressed this phenomenon, thereby reducing the noise emitted by the optimized valve by 18.2 dB compared to the original valve. These findings can serve as a guide for designing and optimizing direct-acting relief valves.

Direction of arrival estimation using the rotating equatorial microphone

Introduction: Direction of arrival (DOA) estimation of sound sources is an essential task of sound field analysis which typically requires two or more microphones. In this study, we present an algorithm that allows for DOA estimation using the previously designed Rotating Equatorial Microphone prototype, which is a single microphone that moves rapidly along a circular trajectory, introducing DOA-dependent periodic distortions in the captured signal.Methods: Our algorithm compensates for the induced spectral distortions caused by the REM’s circular motion for multiple DOA candidates. Subsequently, the best DOA candidate is identified using two distortion metrics. We verify our approach through numerical simulations and practical experiments conducted in a low-reverberant environment.Results: The proposed approach localizes unknown single-frequency sources with a mean absolute error of 23 degrees and unknown wideband sources with a mean absolute error of 5.4 degrees in practice. Two sources are also localizable provided they are sufficiently separated in space.Conclusion: Whilst previous work only allowed for DOA estimation of a single monochromatic sound source with a known frequency, our DOA estimation algorithm enables localization of unknown and arbitrary sources with a single moving microphone.

Acoustic Imaging With Circular Microphone Array: A New Approach for Sound Field Analysis

Acoustic Imaging With Circular Microphone Array: A New Approach for Sound Field Analysis

Low frequency inversion method based on multi-layer holizontal variation shallow seafloor model

Sound propagation in shallow water is significantly influenced by geoacoustic properties. Estimating these geoacoustic parameters is essential for sound field analysis and sonar performance assessment. As a common practice, the seafloor is often treated as a single-layer or two-layer range-independent geoacoustic model to reduce the number of involved parameters. However, acoustic parameters inverted through these two geoacoustic models are typically limited in their applicability to a specific frequency range, thus posing challenges when applied across a broader frequency range. A range-dependent multi-layer geoacoustic model based on experimental measurements obtained with a sub-bottom profiler is proposed in this study. The inversion scheme combines three inversion methods to estimate geoacoustic parameters, considering the different sensitivities of geoacoustic parameters to different physical parameters within the acoustic field. Firstly, modal dispersion is used to invert the geoacoustic parameters of each layer, with the dispersion curve obtained through warping transform and the Wigner-Ville distribution. After that, both the localization using matched field processing and the dispersion curve fitting demonstrate the effectiveness of the inversion results for each layer, although the peak of the probability distribution of sound speed in the first layer is broader than in others. Secondly, matched field processing is employed to invert the geoacoustic parameters of the first layer. This method is based on the theory that as frequency increases, the depth of sound rays penetrating the seabed decreases, revealing changes in the first layer's sound speed with the seabed depth. Lastly, bottom attenuation coefficients at different frequencies are inverted by the transmission loss (TL), and a fitting relationship between the attenuation coefficient and the frequency is derived. The inversion results obtained by using the range-dependent multi-layer geoacoustic model are compared with results estimated by the single-layer geoacoustic model. The findings indicate that the transmission loss (TL) error from the range-dependent multi-layer geoacoustic model in this study is smaller than that from the single-layer geoacoustic model, especially in the lower frequency band. The range-dependent multi-layer geoacoustic model proves to be suitable for a broader frequency range, providing better precision in explaining various acoustic phenomena.

Assessing the low-frequency measurement procedure for the measurement of impact sound insulation using the rubber ball

ISO 16283-2 includes a procedure for measuring field impact sound insulation at low frequencies using a tapping machine to improve the repeatability, reproducibility, and relevance of results in the 50, 63, and 80 Hz one-third octave bands in small receiving rooms (volumes less than 25 m3). However, the low-frequency measurement procedure with excitation from a standardized rubber ball was not included because the link between measurements of Li,Fmax from the central region and corners had not been established at the time of writing. This paper assesses the use of the low-frequency measurement procedure with a rubber ball source through measurements of Li,Fmax in a vertical transmission suite at the Building Research Institute (Japan). It also provides analysis of the modal sound field in the receiving room due to rubber ball excitation of the concrete slab. The results indicated that the low-frequency measurement procedure was beneficial in this 60 m3 room to estimate the room average sound pressure level below 80 Hz. Future work could therefore evaluate the low-frequency procedure in the field with different room volumes and floor constructions.

Finite element analysis of sound fields in the corridors of the hospital ward: Investigation on installing patterns of sound absorbing materials

In this paper, using the time-domain finite element method (TDFEM), an effective installation pattern of sound absorbing materials in corridors of the hospital ward is investigated. First, several models with different installation patterns of sound absorbing materials are analyzed by TDFEM. Next, spatial distributions of the squared sound pressure, the sound pressure level and the speech intelligibility index are calculated in each model. As a result, the amount of decrease of the sound pressure level by installing sound absorbing materials on the ceiling and part of the wall in case that room average (α¯) equals 0.18 is larger than those by installing sound absorbing materials on the ceiling in case that α¯ = 0.20. Finally, several models with different installation patterns of sound absorbing materials, of which is the same, are analyzed by TDFEM, and compared among the amount of decrease of sound pressure levels in each condition.

Fundamental study on directivity of acoustic radiation from tire by using ray tracing method

Ray tracing method is classified as a geometric acoustic theory and is a commonly used method for analysing sound field in buildings. It traces the reflection and propagation paths of a number of sound rays radiated from a sound source. Originally, ray tracing method does not take frequency response into account, but in this study, ray tracing method is modified so that frequency response can be calculated in order to apply ray tracing method to general sound field analysis other than buildings. For this purpose, the propagation distance of each sound ray due to reflection are considered, and the interference of each sound ray at the receiver is calculated. To verify the effectiveness of the proposed method, it is applied to the acoustic radiation of tire noise as an example. In addition, the directivity of the tire noise acoustic radiation is investigated on the basis of ray tracing method.

Reverberant Sound Field Analysis of a Rectangular Room by Modal Synthesis Method

It is well known that the reverberation time within an enclosed space is dominated by its boundary surface absorption. The absorption can then be interpreted as averaged damping ratio of acoustical modes or a loss factor. The damping ratio can be determined during steady state excitation or during the transient decay or reverberation process. In this paper, acoustical reverberant field is considered as a synthesis of independent acoustical modes with their corresponding damping ratios. Each damping ratio is calculated from the absorption coefficient of the enclosed space considering the wavenumber vector. It is suggested that the consideration for the wave travelling direction in determining the modal decay rate give better results for a simple rectangular room.

A hat-shape error microphone array for user-friendly spatial active noise control

Spatial active noise control (ANC) has been developed in the past decades to reduce unwanted acoustic noise over a desired region by generating an anti-noise field with secondary loudspeakers. Unlike conventional multi-channel ANC systems, the integration of spherical harmonic-based sound field analysis allows the ANC system to reduce noise over a continuous region surrounding the user's head rather than discrete points. However, the use of a spherical error microphone array on the boundary of the region for spherical harmonic analysis poses a limitation as it obstructs user access to the controlled area. In this work, we introduce a hat-shaped error microphone array design which can be placed above the listener's head. The proposed error microphone array can achieve spherical harmonic-based residual noise field analysis and is more user-friendly, allowing unrestricted user head movement. We construct the hat-shaped error microphone array and present the results of ANC experiments conducted using the array.

Advancing sound field analysis with physics-informed neural networks

This work introduces a method that employs physics-informed neural networks to reconstruct sound fields in diverse rooms, including both typical acoustically damped meeting rooms and more spaces of cultural significance, such as concert halls or theatres. The neural network is trained using a limited set of room impulse responses, integrating the expressive capacity of neural networks with the fundamental physics of sound propagation governed by the wave equation. Consequently, the network accurately represents sound fields within an aperture without requiring extensive measurements, regardless of the complexity of the sound field. Notably, our approach extends beyond sound pressure estimation and includes valuable vectorial quantities, such as particle velocity and intensity, resembling classical holography methods. Experimental results confirm the efficacy of the proposed approach, underscoring its reconstruction accuracy and computational efficiency. Moreover, by enabling the acquisition of sound field quantities in the time domain, which were previously challenging to obtain from measurements, our method opens up new frontiers for the analysis and comprehension of sound propagation phenomena in rooms.

A Sound Velocity Prediction Model for Seafloor Sediments Based on Deep Neural Networks

The acoustic properties of seafloor sediments have always been important parameters in sound field analyses and exploration for marine resources, and the accurate acquisition of the acoustic properties of sediments is one of the difficulties in the study of underwater acoustics. In this study, sediment cores were taken from the northern South China Sea, and the acoustic properties were analyzed. Since traditional methods (such as regression equations or theoretical models) are difficult to apply in practical engineering applications, we applied remote sensing data to sound velocity prediction models for the first time. Based on the influencing mechanism of the acoustic properties of seafloor sediments, the sediments’ source, type and physical properties have a great influence on the acoustic properties. Therefore, we replaced these influencing factors with easily accessible data and remote sensing data, such as parameters of granularity, distance to the nearest coast, decadal average sea surface productivity, water depth, etc., using deep neural networks (DNN) to develop a sound velocity prediction model. Compared with traditional mathematical analyses, the DNN model improved the accuracy of prediction and can be applied to practical engineering applications.

Fast Multipole Boundary Element Method for Aerodynamic Sound Field Analysis Based on Lighthill’s Equation

The primary disadvantage of the aerodynamic sound field analysis based on the Lighthill’s equation using the boundary element method (BEM) is the computational time; this is mainly because contributions from numerous aerodynamic sound sources are computed at all boundary element nodes and sound-receiving points. This study proposes a fast method for computing source contributions based on the fast multipole method (FMM). Along with the fast multipole BEM, which is already in practical use as a fast BEM, the analysis is substantially accelerated. The use of a common hierarchical cell structure for grouping boundary element nodes, sound-receiving points and aerodynamic sound sources, enables coefficients of the FMM to be reused, thereby further accelerating the analysis. To deal with the increasing hierarchical level, a wideband FMM is applied. In the sound radiation analysis of a quadrupole source located in a free field, the accuracy is validated. Sound radiation from a cylinder located in a flow is analyzed as a practical problem; the accuracy and numerical settings are discussed. Finally, the proposed method is applied to a problem with more than 0.4 million degrees-of-freedom and more than 3 million aerodynamic sound sources to demonstrate its applicability to large-scale problems.

Case study: Noise attenuating performance of perforated corrugated lined straight-through perforated pipe-resistant muffler

Noise of internal combustion engine is the main source of noise pollution, and mufflers are the main means to reduce exhaust noise of internal combustion engine. In the process of improving the acoustic performance of the exhaust muffler based on the three-dimensional numerical method, the influence of the high speed and high temperature airflow discharged by the engine in the actual working process on the acoustic performance of the exhaust muffler is often ignored, which leads to the obvious deviation between the predicted results and the actual situation. In this paper, based on the structural optimization design of the straight-through perforated pipe resistance muffler, the noise characteristics of the straight-through perforated pipe resistance muffler with perforated corrugated lining was analyzed considering the airflow velocity and temperature inside the muffler. The influence of temperature and velocity fields on the acoustic performance of muffler was studied by using numerical simulation method, which takes the solution results inside muffler as boundary conditions of sound field analysis. The influence of changing the internal structure of muffler on the aerodynamic performance of muffler was discussed, and the pressure loss is analyzed. The research has shown that adding perforated corrugated lining inside muffler could effectively improve the transmission loss of muffler and the noise reduction performance of prototype straight-through perforated pipe-resistant muffler.

Assessing the impacts of anthropogenic sounds on early stages of benthic invertebrates: The “Larvosonic system”

AbstractNoise produced by human activities has increased in the oceans over the last decades. Whereas most studies have focused on the impact of anthropogenic noise on marine mammals and fishes, those focusing on marine invertebrates are rarer and more recent, especially when considering peri‐metamorphic benthic stages, highly sensitive to anthropogenic perturbations. A careful review of the literature reveals a simplistic characterization of the acoustics within the containers used to quantify larval and juvenile responses to noise, thus weakening the conclusions of such works. To address this problem, we developed the Larvosonic system, a laboratory tank equipped with acoustic assets to assess the impacts of noise on young stages of marine invertebrates. We first provide a careful analysis of the tank sound field using different sound types, and we assess the effects of expanded polystyrene units on the sounds emitted by a professional audio system in order to dampen reverberation and resonance. Then, we apply this acoustic calibration to the effects of both pile driving and drilling noises on postlarvae of the scallop bivalve Pecten maximus. Acoustic recordings highlight that diffuser and bass trap components constitute effective underwater sound absorbents, reducing the reflection of the whole frequency bandwidth. Scallop experiments reveal that both type and level of the tested noise influenced postlarval growth, with interactive effects between trophic environment and noise level/spectra. The Larvosonic system thus constitutes an efficient tool for bioacoustics research on bentho‐planktonic invertebrate species.

Reconstruction and analysis of a non-stationary sound field in a uniformly flow medium

A multistep time domain plane wave superposition method (M-TPWM) is expanded into a new environment that the medium is fluid, and an M-TPWM with flow medium (FM-TPWM) is proposed to reconstruct the non-stationary sound field in a uniformly flow medium. In the FM-TPWM, two situations that the flow directions of the medium are parallel to and perpendicular to the hologram plane are researched. The time-varying pressures on the hologram plane in these two situations are expressed as a superposition of time convolutions between the pressure time-wavenumber spectra of a virtual source plane and the corresponding new time domain propagation kernel derived in the flow medium. Subsequently, the discrete solving equations in the parallel and perpendicular situations at one time are established. The pressure time-wavenumber spectra at only this time can be solved by once solving inverse calculation. Then, these discrete solving equations in the flow medium at several times are combined for forming the larger solving matrix equations in the parallel and perpendicular situations, and by once multistep calculation, the pressure spectra at these times are acquired concurrently. Consequently, the time-varying pressures on the reconstruction plane in the flow medium are calculated by the corresponding acquired pressure time-wavenumber spectra. Numerical simulations with parallel and perpendicular situations are applied to examine the performance of the proposed FM-TPWM, in which two monopole sources in the flow medium are used to engender the non-stationary sound field. The simulation results prove that the proposed FM-TPWM can reconstruct the non-stationary sound field very well when the flow directions of the medium are parallel to and perpendicular to the hologram plane, respectively. Besides, several meaningful parameters are discussed in detail to prove the adaptability and robustness of the proposed FM-TPWM in the flow medium, and its reconstruction advantages are protruded in comparison to the real-time nearfield acoustic holography with the flow medium.

Sound Field Modeling Method and Key Imaging Technology of an Ultrasonic Phased Array: A Review

An ultrasonic phased array consists of multiple ultrasonic probes arranged in a certain regular order, and the delay time of the excitation signal sent to each array element is controlled electronically. The testing system model based on ultrasonic propagation theory is established to obtain a controllable and focused sound field, which has theoretical and engineering guiding significance for the calculation and analysis of ultrasonic array sound fields. Perfecting array theory and exploring array imaging methods can obtain rich acoustic information, provide more intuitive and reliable research results, and further the development of ultrasonic phased-array systems. This paper reviews the progress of research on the application of ultrasound arrays for non-destructive testing (NDT) and brings together the most relevant published work on the application of simulation methods and popular imaging techniques for ultrasonic arrays. It mainly reviews the modeling approaches, including the angular spectrum method (ASM), multi-Gaussian beam method (MGB), ray tracing method, finite element method (FEM), finite difference method (FDM), and distributed point source method (DPSM), which have been used to assess the performance and inspection modality of a given array. In addition, the array of imaging approaches, including the total focusing method (TFM), compression sensing imaging (CSI), and acoustic nonlinearity imaging (ANI), are discussed. This paper is expected to provide strong technical support in related areas such as ultrasonic array testing theory and imaging methods.

An experimental study on the influence of incident characteristics on sound insulation between rooms: Study on the incident sound field in the insulation performance measurement for partition walls. Part 2

AbstractThe sound field characteristics due to room modes are considered to have strong influences on the low‐frequency sound insulation between rooms in field. In this paper, the sound field analysis using the propagation mode expansion method proposed by the authors was applied to the test rooms where the dwelling rooms and the separating wall of an RC apartment building were reproduced. First, the proposed method was validated through the reconstruction of the expanded sound fields and the measurement of the incident directivity. Next, the comparison of the multiple geometries of the source room with two finishing conditions of the RC separating wall demonstrated the influence of the incident sound field on the sound insulation. The mechanism of the sound insulation between rooms was investigated using the proposed method. For the RC single wall, the sound field analysis showed an influence of mode matching between rooms on the low‐frequency transmitted sound. For the composite wall which was composed of the RC separating wall and the additional linings, it was demonstrated that the low‐frequency resonance transmission phenomenon is affected by the matching of the oblique incidence resonance frequency of the wall and the incident characteristics.