Sorbent-impregnated Polyurethane Foam Research Articles

Per- and polyfluoroalkyl substances and volatile methyl siloxanes in global air: Spatial and temporal trends

The study reports on the atmospheric concentrations of per- and polyfluoroalkyl substances (PFAS) and volatile methyl siloxanes (VMS) measured using sorbent-impregnated polyurethane foam disks (SIPs) passive air samplers. New results are reported for samples collected in 2017, which extends temporal trend information to the period 2009–2017, for 21 sites where SIPs have been deployed since 2009. Among neutral PFAS, fluorotelomer alcohols (FTOHs) had higher concentrations than perfluoroalkane sulfonamides (FOSAs) and perfluoroalkane sulfonamido ethanols (FOSEs) with levels of ND‒228, ND‒15.8, ND‒10.4 pg/m3, respectively. Among ionizable PFAS, the sum of perfluoroalkyl carboxylic acids (PFCAs) and perfluoroalkyl sulfonic acids (PFSAs) in air were 0.128–781 and 6.85–124 pg/m3, respectively. Longer-chain i.e. C9–C14 PFAS, which are relevant to the recent proposal by Canada for a listing of long-chain (C9–C21) PFCAs to the Stockholm Convention, were also detected in the environment at all site categories including Arctic sites. Cyclic and linear VMS ranged between 1.34‒452 and 0.01–12.1 ng/m3, respectively, showing dominance in urban areas. Despite the wide range of levels observed across different site categories, geometric means of the PFAS and VMS groups were fairly similar when grouped according to the five United Nations regions. Variable temporal trends in air (2009–2017) were observed for both PFAS and VMS. PFOS, which has been listed in the Stockholm Convention since 2009, is still showing increasing tendencies at several sites, indicating constant input from direct and/or indirect sources. These new data inform international chemicals management for PFAS and VMS.

Air monitoring of new and legacy POPs in the Group of Latin America and Caribbean (GRULAC) region

A special initiative in the Global Atmospheric Passive Sampling (GAPS) Network was implemented to provide information on new and emerging persistent organic pollutants (POPs) in the Group of Latin America and Caribbean (GRULAC) region. Regional-scale atmospheric concentrations of the new and emerging POPs hexachlorobutadiene (HCBD), pentachloroanisole (PCA) and dicofol indicators (breakdown products) are reported for the first time. HCBD was detected in similar concentrations at all location types (<20–120 pg/m3). PCA had elevated concentrations at the urban site Concepción (Chile) of 49–222 pg/m3, with concentrations ranging <1–8.5 pg/m3 at the other sites in this study. Dicofol indicators were detected at the agricultural site of Sonora (Mexico) at concentrations ranging 30–117 pg/m3. Legacy POPs, including a range of organochlorine (OC) pesticides and polychlorinated biphenyls (PCBs), were also monitored to compare regional atmospheric concentrations over a decade of monitoring under the GAPS Network. γ-hexachlorocyclohexane (HCH) and the endosulfans significantly decreased (p < 0.05) from 2005 to 2015, suggesting regional levels are decreasing. However, there were no significant changes for the other legacy POPs monitored, likely a reflection of the persistency and slow decline of environmental levels of these POPs. For the more volatile OCs, atmospheric concentrations derived from polyurethane foam (PUF) (acting as an equilibrium sampler) and sorbent impregnated PUF (SIP) (acting as a linear phase sampler), were compared. The complimentary methods show a good agreement of within a factor of 2–3, and areas for future studies to improve this agreement are further discussed.

Occurrence and spatial distribution of neutral perfluoroalkyl substances and cyclic volatile methylsiloxanes in the atmosphere of the Tibetan Plateau

Abstract. Due to their properties of bioaccumulation, toxicity, and long-range atmospheric transport, polyfluoroalkyl and perfluoroalkyl substances (PFASs) and cyclic volatile methylsiloxanes (cVMSs) are currently being considered as emerging persistent organic pollutants (POPs) for regulation. To date, there are limited data on PFASs and cVMSs in the atmosphere of the Tibetan Plateau (TP), a remote environment which can provide information on global background conditions. Sorbent-impregnated polyurethane foam (SIP) disc passive air samplers were therefore deployed for 3 months (May to July 2011 and 2013) at 16 locations across the TP. Using previously reported methods for estimating the air volume sampled by SIP discs, the derived atmospheric concentrations ranged as follows: 18–565 ng m−3 for ΣcVMS (including D3, D4, D5, and D6); 65–223 pg m−3 for fluorotelomer alcohols (ΣFTOHs); 1.2–12.8 pg m−3 for fluorinated sulfonamides (ΣFOSA); and 0.29–1.02 pg m−3 for fluorinated sulfonamidoethanols (ΣFOSE). The highest ΣcVMS occurred at Lhasa, the capital city of the TP, indicating the local contribution to the emerging pollutants. Higher levels of ΣFTOHs were observed at sites close to the transport channel of the Yarlung Tsangpo Grand Canyon, indicating possible long-range atmospheric transport (LRAT). Elevated concentrations of shorter-chain volatile PFAS precursors (4 : 2 FTOH and fluorobutane sulfonamidoethanol) were found in most air samples, reflecting the shift in production from long- to short-chain PFASs in Asia. Overall, concentrations of emerging POPs at background sites of the TP were 1–3 orders of magnitude higher than those reported for legacy POPs.

Characterization of polyurethane foam (PUF) and sorbent impregnated PUF (SIP) disk passive air samplers for measuring organophosphate flame retardants

This study aimed to characterize the uptake of organophosphate esters (OPEs) by polyurethane foam (PUF) and sorbent-impregnated polyurethane foam (SIP) disk passive air samplers (PAS). Atmospheric OPE concentrations were monitored with high-volume active air samplers (HV-AAS) that were co-deployed with passive air samplers. Samples were analyzed for tris(2-chloroisopropyl) phosphate (TCIPP), tri(phenyl) phosphate (TPhP), tris(2-chloroethyl) phosphate (TCEP), and tris(2,3-dichloropropyl) phosphate (TDCIPP). The mean concentration of ∑OPEs in air was 2650 pg/m3 for the HV-AAS. Sampling rates and the passive sampler medium (PSM)-air partition coefficient (KPSM−Air) were calculated for individual OPEs. The average calculated sampling rates (R) for the four OPEs were 3.6 ± 1.2 and 4.2 ± 2.0 m3/day for the PUF and SIP disks, respectively, and within the range of the recommended default value of 4 ± 2 m3/day. Since most of the OPEs remained in the linear uptake phase during the study, COSMO-RS solvation theory and an oligomer-based model were used to estimate KPUF-Air for the OPEs. The estimated values of log KPUF-Air were 7.45 (TCIPP), 9.35 (TPhP), 8.44 (TCEP), and 9.67 (TDCIPP). Finally, four configurations of the PUF and SIP disks were tested by adjusting the distance of the gap opening between the upper and lower domes of the sampler housing: i.e. 2 cm, 1 cm, no gap and 1 cm overlap. The sampling rate did not differ significantly between these four configurations (p < 0.05).

Emission of poly and perfluoroalkyl substances, UV-filters and siloxanes to air from wastewater treatment plants

The potential of wastewater treatment plants (WWTPs) to act as sources of poly and perfluoroalkyl substances (PFASs), volatile methyl siloxanes (VMSs) and organic UV-filters to the atmosphere was investigated. Target compounds included: PFASs (fluorotelomer alcohols (FTOHs), perfluorooctane sulfonamides/sulfonamidoethanols (FOSAs/FOSEs), perfluroalkyl sulfonic acids (PFSAs) and perfluroalkyl carboxylic acids (PFCAs)), cyclic VMSs (D3 to D6), linear VMSs (L3 to L5) and eight UV-filters. Emissions to air were assessed at eight WWTPs using paired sorbent-impregnated polyurethane foam passive air samplers, deployed during summer 2013 and winter 2014. Samplers were deployed on-site above the active tank and off-site as a reference. Several types of WWTPs were investigated: secondary activated sludge in urban areas (UR-AS), secondary extended aeration in towns (TW-EA) and facultative lagoons in rural areas (RU-LG). The concentrations of target compounds in air were ∼1.7–35 times higher on-site compared to the corresponding off-site location. Highest concentrations in air were observed at UR-AS sites while the lowest were at RU-LG. Higher air concentrations (∼2–9 times) were observed on-site during summer compared to winter, possibly reflecting enhanced volatilization due to higher wastewater temperatures or differences in influent wastewater concentrations. A significant positive correlation was obtained between concentrations in air and WWTP characteristics (influent flow rate and population in the catchment of the WWTP); whereas a weak negative correlation was obtained with hydraulic retention time. Emissions to air were estimated using a simplified dispersion model. Highest emissions to air were seen at the UR-AS locations. Emissions to air (g/year/tank) were highest for VMSs (5000–112,000) followed by UV-filters (16–2000) then ΣPFASs (10–110).

Using air, soil and vegetation to assess the environmental behaviour of siloxanes.

This study aimed to contribute to the enhancement of the knowledge of levels, trends and behaviour of eight siloxanes (four linear and four cyclic) in the environment. Adding to the prioritised scrutiny of the incidence in the atmosphere through passive samplers (sorbent-impregnated polyurethane foam disks--SIPs), the sampling of pine needles and soil was also performed, thus closing the circle of atmospheric exposure in the areas of study. Two sampling campaigns (one in summer and one in winter) were done in a total of eight sampling points in the Portuguese territory, which covered a wide range of human presence and land uses (urban, industrial, remote and beach areas). By adopting a "green" approach in terms of analytical methods, namely reducing the clean-up steps for the passive air samples and using the quick, easy, cheap, effective, rugged and safe (QuEChERS) technology for soils and pine needles, the results showed total concentration of siloxanes between 5 and 70 ng g(-1) (dry weight) for soils and from 2 to 118 ng g(-1) (dry weight (dw)) for pine needles, with no clear seasonal trend. For SIPs, the levels varied from 0.6 to 7.8 ng m(-3) and were higher in summer than in winter in all sites. Overall, the cyclic siloxanes were found in much higher concentrations, with D5 and D6 being the most predominant in a great majority of cases. Also, the urban and industrial areas had the highest incidence, suggesting a strong anthropogenic fingerprint, in line with their main uses.

Evaluation of two passive samplers for the analysis of organophosphate esters in the ambient air

Both polyurethane foam (PUF) and sorbent-impregnated PUF (SIP) passive air sampling (PAS) methods were deployed and compared separately for the analysis of organophosphate esters (OPEs) in outdoor atmospheric environment. During an continuous period of 84 days, parallel samples were also collected by a high-volume active air sampler (HV-AAS) to assess the contamination levels and to calibrate uptake parameters of PAS. The total concentration of OPEs in both particulate and gaseous phases ranged from 1.50 to 5.64ngm−3 in ambient air. Tris(2-chloroisopropyl) phosphate (TCPP) was the dominating analog, representing 78±9% of total OPE concentration. SIP-PAS showed longer linear-phase sampling period for TCPP, and accumulated more amount of the most volatile triethyl phosphate (TEP) and tributyl phosphate (TBP) homologues, while similar sorption performances of both PAS methods were found for most of the semi-volatile OPEs. Linear sampling rates in PUF-PAS and SIP-PAS disks were calculated for individual OPEs except for TEP and TBP, and the average uptake rates (3.3±1.1 and 3.5±1.7m3d−1, respectively) were close to the acknowledged value (4m−3d−1) for persistent organic pollutants. Besides, isotopic labeled D15-Triphenyl phosphate (TPhP) could be used as a viable depuration compound to calculate site-specific sampling rates of OPEs, with a linear loss of up to ∼60% at the end of deployment time.

Calibration of two passive air samplers for monitoring phthalates and brominated flame-retardants in indoor air

Two passive air samplers (PAS), polyurethane foam (PUF) disks and Sorbent Impregnated PUF (SIP) disks, were characterized for uptake of phthalates and brominated flame-retardants (BFRs) indoors using fully and partially sheltered housings. Based on calibration against an active low-volume air sampler for gas- and particle-phase compounds, we recommend generic sampling rates of 3.5±0.9 and 1.0±0.4m3/day for partially and fully sheltered housing, respectively, which applies to gas-phase phthalates and BFRs as well as particle-phase DEHP (the later for the partially sheltered PAS). For phthalates, partially sheltered SIPs are recommended. Further, we recommend the use of partially sheltered PAS indoors and a deployment period of one month. The sampling rate for the partially sheltered PUF and SIP of 3.5±0.9m3/day is indistinguishable from that reported for fully sheltered PAS deployed outdoors, indicating the role of the housing outdoors to minimize the effect of variable wind velocities on chemical uptake, versus the partially sheltered PAS deployed indoors to maximize chemical uptake where air flow rates are low.

Temporal variations of cyclic and linear volatile methylsiloxanes in the atmosphere using passive samplers and high-volume air samplers.

Cyclic and linear volatile methylsiloxanes (cVMSs and lVMSs, respectively) were measured in ambient air over a period of over one year in Toronto, Canada. Air samples were collected using passive air samplers (PAS) consisting of sorbent-impregnated polyurethane foam (SIP) disks in parallel with high volume active air samplers (HV-AAS). The average difference between the SIP-PAS derived concentrations in air for the individual VMSs and those measured using HV-AAS was within a factor of 2. The air concentrations (HV-AAS) ranged 22-351 ng m(-3) and 1.3-15 ng m(-3) for ΣcVMSs (D3, D4, D5, D6) and ΣlVMSs (L3, L4, L5), respectively, with decamethylcyclopentasiloxane (D5) as the dominant compound (∼75% of the ΣVMSs). Air masses arriving from north to northwest (i.e., less populated areas) were significantly less contaminated with VMSs compared to air arriving from the south that are impacted by major urban and industrial areas in Canada and the U.S. (p < 0.05). In addition, air concentrations of ΣcVMSs were lower during major snowfall events (on average, 73 ng m(-3)) in comparison to the other sampling periods (121 ng m(-3)). Ambient temperature had a small influence on the seasonal trend of VMS concentrations in air, except for dodecamethylcyclohexasiloxane (D6), which was positively correlated with the ambient temperature (p < 0.001).

Characterization of Two Passive Air Samplers for Per- and Polyfluoroalkyl Substances

Two passive air sampler (PAS) media were characterized under field conditions for the measurement of per- and polyfluoroalkyl substances (PFASs) in the atmosphere. The PASs, consisting of polyurethane foam (PUF) and sorbent-impregnated PUF (SIP) disks, were deployed for over one year in parallel with high volume active air samplers (HV-AAS) and low volume active air samplers (LV-AAS). Samples were analyzed for perfluoroalkyl carboxylic acids (PFCAs), perfluoroalkane sulfonic acids (PFSAs), fluorotelomer alcohols (FTOHs), fluorotelomer methacrylates (FTMACs), fluorotelomer acrylates (FTACs), perfluorooctane sulfonamides (FOSAs), and perfluorooctane sulfonamidoethanols (FOSEs). Sampling rates and the passive sampler medium (PSM)-air partition coefficient (KPSM-A) were calculated for individual PFASs. Sampling rates were similar for PFASs present in the gas phase and particle phase, and the linear sampling rate of 4 m(-3) d(-1) is recommended for calculating effective air sample volumes in the SIP-PAS and PUF-PAS for PFASs except for the FOSAs and FOSEs in the PUF-PAS. SIP disks showed very good performance for all tested PFASs while PUF disks were suitable only for the PFSAs and their precursors. Experiments evaluating the suitability of different isotopically labeled fluorinated depuration compounds (DCs) revealed that (13)C8-perfluorooctanoic acid (PFOA) was suitable for the calculation of site-specific sampling rates. Ambient temperature was the dominant factor influencing the seasonal trend of PFASs.

Sorbent impregnated polyurethane foam disk passive air samplers for investigating current-use pesticides at the global scale

A pilot study conducted at a subset of 20 sites operated under the GAPS (Global Atmospheric Passive Sampling) Network compared the performance of two types of passive samplers for measuring air concentrations of currently–used pesticides, during 3–month deployment periods. The conventional polyurethane foam (PUF) disk sampler was able to capture a range of targeted current–use pesticides CUPs (dacthal, trifluralin, chlorothalonil, chlorpyrifos, and pendimethalin) but experienced equilibrium for some compounds (dacthal, trifluralin, and chlorothalonil) during the deployment period. The second sampler type used was a modified PUF disk sampler impregnated with XAD powder [i.e. the SIP (sorbent–impregnated PUF) disk] to increase sorptive capacity. The SIP disk sampler accumulated greater amounts of most targeted CUPs when compared to the PUF disk sampler. Results of the study showed that chlorothalonil was the most abundant CUP reflecting its widespread use, globally; whereas dacthal exhibited greater global distribution, including presence at remote sites, reflecting its high potential for long–range atmospheric transport. A thorough calibration of both the PUF disk and the SIP disk samplers is required to further define uptake profiles and to determine their range of applicability for various CUPs.

Assessment of sorbent impregnated PUF disks (SIPs) for long-term sampling of legacy POPs

Two field studies were conducted for one year using sorbent-impregnated polyurethane foam (SIP) disks for PCB and PBDE air sampling. SIP disks were introduced by Shoeib et al. (2008) as an alternative passive air sampling medium to the polyurethane foam (PUF) disk and have the advantage of a higher holding capacity for organic chemicals. The first study on SIP disks confirmed their application for measuring volatile perfluorinated compounds (PFCs) and their ability to maintain time-integrated (linear) air sampling. In this study, the suitability of the SIP disks for long-term sampling of polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and hexachlorobenzene (HCB) was assessed. SIP disks were deployed at a rural site in the UK and harvested after periods ranging from 35-350 days. Atmospheric POP concentrations were monitored with a high-volume air sampler during the deployment period. Linear uptake was observed for all monitored PCBs and PBDEs over the full exposure time. Air-sampler equilibrium was observed for HCB after 6 months. In a second field study, SIP disks were deployed for one year at 10 sites on a latitudinal transect in the UK and Norway, at which air sampling has been undertaken previously with different passive air sampling media since 1994. The estimated concentrations and spatial distributions derived from the SIP disks were largely in agreement with previously reported data.

Application of Sorbent Impregnated Polyurethane Foam (SIP) Disk Passive Air Samplers for Investigating Organochlorine Pesticides and Polybrominated Diphenyl Ethers at the Global Scale

As part of continued efforts under the Global Atmospheric Passive Sampling (GAPS) Network to develop passive air samplers applicable to a wide-range of compounds, sorbent-impregnated polyurethane foam (SIP) disk samplers were codeployed and tested against conventional polyurethane foam (PUF) disk samplers. The SIP disk sampler has a higher sorptive capacity compared to the PUF disk sampler, due to its impregnation with ground XAD resin. The two sampler types were codeployed at 20 sites during the 2009, 3-month long spring sampling period of the GAPS Network. Air concentrations for chlordanes (trans-chlordane, cis-chlordane, and trans-nonachlor) and endosulfans (endosulfan I, endosulfan II, and endosulfan sulfate) derived from PUF disk and SIP disk samplers showed near 1:1 agreement and confirmed previous results for polychlorinated biphenyls (PCBs). Discrepancies observed for α-HCH and γ-HCH in PUF disk versus SIP disk are attributed to lack of "comparability" of the PUF and SIP data sets, due to differences in effective air sampled by the two devices caused by saturation of these higher volatility compounds in the lower capacity PUF disk samplers. Analysis of PBDEs in PUF and SIP disks showed relatively good agreement but highlighted challenges associated with high blanks levels for PBDEs. The higher capacity SIP disk samplers allowed for the analysis of pentachlorobenzene (PeCBz) and hexachlorobenzene (HCBz) and revealed a relatively uniform global distribution of these compounds. The results of this study further validate the SIP disk sampler as a complement to the PUF disk sampler, with capabilities for a broad range of POPs targeted under international POPs treaties such as the Stockholm Convention on POPs and its Global Monitoring Plan.

Wastewater treatment plants and landfills emit volatile methyl siloxanes (VMSs) to the atmosphere: Investigations using a new passive air sampler

Volatile methyl siloxanes (VMSs) are a class of chemicals with an increasing range of applications and widespread distribution in the environment. Passive air samplers (PAS) comprising sorbent-impregnated polyurethane-foam (SIP) disks were first calibrated and then deployed around two wastewater treatment plants (WWTPs) and at two landfill sites to investigate inputs of VMSs to air. SIP-derived air concentrations for ΣVMSs (ng/m3) at background sites on the perimeter of the WWTP were 479±82.3 and comparable to results for the upwind samples at the landfills (333±194). Order of magnitude higher concentrations of ΣVMSs (ng/m3) were found for on-site samples at the WWTPs (3980±2620) and landfills (4670±3360). Yearly emissions (kg/yr) to air were estimated and ranged from 60–2100 and 80–250, respectively, for the cyclic VMSs. These findings demonstrate and quantify for the first time, waste sector emissions of VMSs to the atmosphere.

Wastewater Treatment Plant and Landfills as Sources of Polyfluoroalkyl Compounds to the Atmosphere

Polyfluoroalkyl compounds (PFCs) were determined in air around a wastewater treatment plant (WWTP) and two landfill sites using sorbent-impregnated polyurethane foam (SIP) disk passive air samplers in summer 2009. The samples were analyzed for five PFC classes (i.e., fluorotelomer alcohols (FTOHs), perfluorooctane sulfonamides (FOSAs), sulfonamidoethanols (FOSEs), perfluoroalkyl sulfonic acids (PFSAs), and perfluoroalkyl carboxylic acids (PFCAs)) to investigate their concentration in air, composition and emissions to the atmosphere. ∑PFC concentrations in air were 3-15 times higher within the WWTP (2280-24 040 pg/m(3)) and 5-30 times higher at the landfill sites (2780-26 430 pg/m(3)) compared to the reference sites (597-1600 pg/m3). Variations in the PFC pattern were observed between the WWTP and landfill sites and even within the WWTP site. For example, FTOHs were the predominant PFC class in air for all WWTP and landfill sites, with 6:2 FTOH as the dominant compound at the WWTP (895-12 290 pg/m(3)) and 8:2 FTOH dominating at the landfill sites (1290-17 380 pg/m(3)). Furthermore, perfluorooctane sulfonic acid (PFOS) was dominant within the WWTP (43-171 pg/m(3)), followed by perfluorobutanoic acid (PFBA) (55-116 pg/m(3)), while PFBA was dominant at the landfill sites (101-102 pg/m(3)). It is also noteworthy that the PFCA concentrations decreased with increasing chain length and that the emissions for the even chain length PFCAs outweighed emissions for the odd chain length compounds. Furthermore, highly elevated PFC concentrations were found near the aeration tanks compared to the other tanks (i.e., primary and secondary clarifier) and likely associated with increased volatilization during aeration that may be further enhanced through aqueous aerosol-mediated transport. ∑PFC yearly emissions estimated using a simplified dispersion model were 2560 g/year for the WWTP, 99 g/year for landfill site 1, and 1000 g/year for landfill site 2. These results highlight the important role of WWTPs and landfills as emission sources of PFCs to the atmosphere.

Global Distribution of Linear and Cyclic Volatile Methyl Siloxanes in Air

The global distribution of linear and cyclic volatile methyl silxoanes (VMS) was investigated at 20 sites worldwide, including 5 locations in the Arctic, using sorbent-impregnated polyurethane foam (SIP) disk passive air samplers. Cyclic VMS are currently being considered for regulation because they are high production volume chemicals that are potentially persistent, bioaccumulative, and toxic. Linear and cyclic VMS (including L3, L4, L5, D3, D4, D5, and D6) were analyzed for in air at all urban, background, and Arctic sites. Concentrations of D3 and D4 are significantly correlated, as are D5 and D6, which suggests different sources for these two pairs of compounds. Elevated concentrations of D3 and D4 on the West coast of North America and at high elevation sites suggest these sites are influenced by trans-Pacific transport, while D5 and D6 have elevated concentrations in urban areas, which is most likely due to personal care product use. Measured concentrations of D5 were compared to modeled concentrations generated using both the Danish Eulerian Hemispheric Model (DEHM) and the Berkeley-Trent Global Contaminant Fate Model (BETR Global). The correlation coefficients (r) between the measured and modeled results were 0.73 and 0.58 for the DEHM and BETR models, respectively. Agreement between measurements and models indicate that the sources, transport pathways, and sinks of D5 in the global atmosphere are fairly well understood.

Air concentrations and particle–gas partitioning of polyfluoroalkyl compounds at a wastewater treatment plant

Environmental contextPolyfluoroalkyl compounds, widely used chemicals in consumer and industrial products, are global pollutants in the environment. Transport mechanisms and environmental pathways of these compounds, however, are not yet fully understood. We show that a wastewater treatment plant can be an important source for polyfluoroalkyl compounds to the atmosphere where they have the potential to be transported long distances. AbstractAn air sampling campaign was conducted at a wastewater treatment plant (WWTP) to investigate air concentrations and particle–gas partitioning of polyfluoroalkyl compounds (PFCs). Samples were collected at an aeration tank and a secondary clarifier using both active high volume samplers and passive samplers comprising sorbent-impregnated polyurethane foam (SIP) disks. Water to air transport of PFCs was believed to be enhanced at the aeration tank owing to aerosol-mediated transport caused by surface turbulence induced by aeration. Mean air concentrations of target PFCs at the aeration tank were enriched relative to the secondary clarifier by factors of ~19, ~4 and ~3 for ∑fluorotelomer alcohols (FTOHs) (11 000 v. 590 pg m–3), ∑perfluorooctane sulfonamides &amp; perfluorooctane sulfonamidoethanols (FOSAs &amp; FOSEs) (120 v. 30 pg m–3) and ∑perfluoroalkyl carboxylates &amp; perfluoroalkyl sulfonates (PFCAs &amp; PFSAs) (4000 v. 1300 pg m–3) respectively. The particle associated fraction in the atmosphere increased with increasing chain length for PFCAs (from 60 to 100%) and PFSAs were predominantly bound to particles (~98%). Lower fractions on particles were found for FTOHs (~3%), FOSAs (~30%) and FOSEs (~40%). The comparison of the active and passive air sampling showed good agreement.

Global Pilot Study of Legacy and Emerging Persistent Organic Pollutants using Sorbent-Impregnated Polyurethane Foam Disk Passive Air Samplers

Sorbent-impregnated polyurethane foam (SIP) disk passive air samplers were deployed alongside polyurethane foam (PUF) disk samplers at 20 sites during the 2009 spring sampling period of the Global Atmospheric Passive Sampling (GAPS) Network. The SIP disk samplers consisted of PUF disks impregnated with finely ground XAD-4 resin. The addition of XAD-4 greatly improves the sorptive capacity of the PUF disk samplers for more volatile and polar chemicals, and allows for linear-phase sampling over several weeks for these compounds. The SIP and PUF disks were analyzed for polychlorinated biphenyls (PCBs), neutral polyfluoroalkyl compounds (PFCs), and ionic PFCs. Correlations between sampler-derived air concentrations for PCBs in the PUF and SIP disks samplers were significant (p < 0.05). The SIP disks effectively captured 4-50% more of the low molecular weight PCBs than the PUF disks samplers, and the PUF disks also had limitations for time-weighted passive sampling of neutral PFCs in air. Theoretical uptake curves for PUF disks showed rapid equilibration occurring in just hours for 8:2 FTOH and in a few days for MeFOSE, while theoretical curves for SIP disks showed superior sampling profiles for the neutral PFCs. PFCs were measured on SIP disks at all sites with 8:2 FTOH being the dominant compound detected and urban centers (n = 3) having the highest total neutral PFC concentrations ranging from 51.7 to 248 pg/m(3). A positive correlation was found between the FTOHs and FOSAs/FOSEs (p < 0.001, Pearson correlation) indicating similar contamination sources. The SIP disk appears to be a promising passive air sampler for measuring both emerging and legacy POPs on a global scale. They can also be used as a complement to the PUF disk sampler for capturing broader classes of compounds, or as a replacement for PUF disks entirely, especially when longer than quarterly deployment periods are desired.

Field intercomparison on the determination of volatile and semivolatile polyfluorinated compounds in air

Environmental context.Polyfluorinated compounds are an emerging group of organic pollutants that are globally distributed in urban and natural environments. Reliable air monitoring methods are crucial to our understanding of how these pollutants are released to, and transported in, the atmosphere. This intercomparison study, involving laboratories that investigate polyfluorinated compounds in air, uncovers inconsistencies in the reported data, and highlights necessary analytical improvements for future research projects. Abstract.Fluorotelomer alcohols, perfluorinated sulfonamides or sulfonamido ethanols are volatile precursors of persistent perfluorinated acids. Published air-sampling strategies and analytical methods to determine these compounds differ. To assess performance on the determination of airborne polyfluorinated compounds, an intercomparison comprising four international research groups was established. Instrumental and analytical comparability between laboratories varied depending on the compound class. Variability in different sampling strategies was assessed for active (high-volume) v. passive samplers consisting of either semipermeable membrane devices or sorbent-impregnated polyurethane foam disks. Results from passive samplers were typically within an order of magnitude of air concentrations from averaged continuous high-volume samples. Smallest deviations (passive v. active) were observed for sorbent-impregnated polyurethane foam disk samplers with best agreement for fluorotelomer alcohols. This study reveals that it is important to be aware of several types of uncertainty or error for the determination of airborne polyfluorinated compounds and report data in this context or to take steps to minimise their impact.

Sorbent-Impregnated Polyurethane Foam Disk for Passive Air Sampling of Volatile Fluorinated Chemicals

A passive air sampler comprising a polyurethane foam (PUF) disk impregnated with XAD-4 powder has been developed. This sorbent-impregnated PUF (SIP) disk builds on previous work using PUF disk passive air samplers that have been effective in spatial air mapping studies of nonpolar hydrophobic chemicals, without the need of electricity or expensive air sampling equipment. In this study, PUF disks and SIP disks are calibrated for sampling volatile polyfluorinated chemicals--specifically, the fluorotelomer alcohols (FTOHs) and perfluoroalkyl sulfonamides (PFASs). Results demonstrate the low sorptive capacity of the PUF disk samplers, particularly for the FTOHs, with PUF disks reaching equilibrium within 1 day, after collecting approximately 0.4 and 1.2 m3 of air for 8:2 FTOH and 10:2 FTOH, respectively. This limits their use for these target compounds when time-weighted, linear-phase sampling is desired. The presence of just 0.4 g of XAD powder in the SIP disks greatly increases the sorptive capacity (by approximately 2 orders of magnitude for the FTOHs) and provides linear-phase sampling for a period of several weeks. PUF-air partition coefficients, KPUF-A, calculated for the FTOHs and PFASs are considerably lower than values predicted using previously established correlations against the octanol-air partition coefficient, KOA, demonstrating the unique partitioning behavior of the polyfluorinated chemicals. Using results from these calibration tests, air concentrations of FTOHs were derived from PUF disk samples that were deployed in 52 homes in Ottawa, Canada, during 2002/2003. These represent the first comprehensive measurements of FTOHs in indoor air in North America. Range and (geometric mean) air concentrations (pg m-3) were 261-28 900 (2070) for 8:2 FTOH and 104-9210 (890) for 10:2 FTOH. These air concentrations are orders of magnitude higher than observed for outdoor air, establishing indoor environments as important for human exposure and also as potential sources to the larger environment.