Solvent Deuterium Isotope Effects Research Articles

Human 2'-Deoxynucleoside 5'-Phosphate N-Hydrolase 1: The Catalytic Roles of Tyr24 and Asp80.

The human enzyme 2'-deoxynucleoside 5'-phosphate N-hydrolase 1 (HsDNPH1) catalyses the hydrolysis of 5-hydroxymethyl-2'-deoxyuridine 5'-phosphate to generate 5-hydroxymethyluracil and 2-deoxyribose-5-phosphate via a covalent 5-phospho-2-deoxyribosylated enzyme intermediate. HsDNPH1 is a promising target for inhibitor development towards anticancer drugs. Here, site-directed mutagenesis of conserved active-site residues, followed by HPLC analysis of the reaction and steady-state kinetics are employed to reveal the importance of each of these residues in catalysis, and the reaction pH-dependence is perturbed by each mutation. Solvent deuterium isotope effects indicate no rate-limiting proton transfers. Crystal structures of D80N-HsDNPH1 in unliganded and substrate-bound states, and of unliganded D80A- and Y24F-HsDNPH1 offer atomic level insights into substrate binding and catalysis. The results reveal a network of hydrogen bonds involving the substrate and the E104-Y24-D80 catalytic triad and are consistent with a proposed mechanism whereby D80 is important for substrate positioning, for helping modulate E104 nucleophilicity, and as the general acid in the first half-reaction. Y24 positions E104 for catalysis and prevents a catalytically disruptive close contact between E104 and D80.

Ligand effects, solvent cooperation, and large kinetic solvent deuterium isotope effects in gold(I)-catalyzed intramolecular alkene hydroamination.

Kinetic studies on the intramolecular hydroamination of protected variants of 2,2-diphenylpent-4-en-1-amine were carried out under a variety of conditions with cationic gold catalysts supported by phosphine ligands. The impact of ligand on gold, protecting group on nitrogen, and solvent and additive on reaction rates was determined. The most effective reactions utilized more Lewis basic ureas, and more electron-withdrawing phosphines. A DCM/alcohol cooperative effect was quantified, and a continuum of isotope effects was measured with low KIE's in the absence of deuterated alcoholic solvent, increasing to large solvent KIE's when comparing reactions in pure MeOH to those in pure MeOH-d4. The effects are interpreted both within the context of a classic gold π-activation/protodeauration mechanism and a general acid-catalyzed mechanism without intermediate gold alkyls.

Probing the role of protein conformational changes in the mechanism of prenylated-FMN-dependent phenazine-1-carboxylic acid decarboxylase

Phenazine-1-carboxylic acid decarboxylase (PhdA) is a prenylated-FMN-dependent (prFMN) enzyme belonging to the UbiD family of decarboxylases. Many UbiD-like enzymes catalyze (de)carboxylation reactions on aromatic rings and conjugated double bonds and are potentially valuable industrial catalysts. We have investigated the mechanism of PhdA using a slow turnover substrate, 2,3-dimethylquinoxaline-5-carboxylic acid (DQCA). Detailed analysis of the pH dependence and solvent deuterium isotope effects associated with the reaction uncovered unusual kinetic behavior. At low substrate concentrations, a substantial inverse solvent isotope effect (SIE) is observed on Vmax/KM of ∼ 0.5 when reaction rates of DQCA in H2O and D2O are compared. Under the same conditions, a normal SIE of 4.15 is measured by internal competition for proton transfer to the product. These apparently contradictory results indicate that the SIE values report on different steps in the mechanism. A proton inventory analysis of the reaction under Vmax/KM and Vmax conditions points to a "medium effect" as the source of the inverse SIE. Molecular dynamics simulations of the effect of D2O on PhdA structure support that D2O reduces the conformational lability of the enzyme and results in a more compact structure, akin to the active, "closed" conformer observed in crystal structures of some UbiD-like enzymes. Consistent with the simulations, PhdA was found to be more stable in D2O and to bind DQCA more tightly, leading to the observed rate enhancement under Vmax/KM conditions.

Human 2'-Deoxynucleoside 5'-Phosphate N-Hydrolase 1: Mechanism of 2'-Deoxyuridine 5'-Monophosphate Hydrolysis.

The enzyme 2'-deoxynucleoside 5'-phosphate N-hydrolase 1 (DNPH1) catalyzes the N-ribosidic bond cleavage of 5-hydroxymethyl-2'-deoxyuridine 5'-monophosphate to generate 2-deoxyribose 5-phosphate and 5-hydroxymethyluracil. DNPH1 accepts other 2'-deoxynucleoside 5'-monophosphates as slow-reacting substrates. DNPH1 inhibition is a promising strategy to overcome resistance to and potentiate anticancer poly(ADP-ribose) polymerase inhibitors. We solved the crystal structure of unliganded human DNPH1 and took advantage of the slow reactivity of 2'-deoxyuridine 5'-monophosphate (dUMP) as a substrate to obtain a crystal structure of the DNPH1:dUMP Michaelis complex. In both structures, the carboxylate group of the catalytic Glu residue, proposed to act as a nucleophile in covalent catalysis, forms an apparent low-barrier hydrogen bond with the hydroxyl group of a conserved Tyr residue. The crystal structures are supported by functional data, with liquid chromatography-mass spectrometry analysis showing that DNPH1 incubation with dUMP leads to slow yet complete hydrolysis of the substrate. A direct UV-vis absorbance-based assay allowed characterization of DNPH1 kinetics at low dUMP concentrations. A bell-shaped pH-rate profile indicated that acid-base catalysis is operational and that for maximum kcat/KM, two groups with an average pKa of 6.4 must be deprotonated, while two groups with an average pKa of 8.2 must be protonated. A modestly inverse solvent viscosity effect rules out diffusional processes involved in dUMP binding to and possibly uracil release from the enzyme as rate limiting to kcat/KM. Solvent deuterium isotope effects on kcat/KM and kcat were inverse and unity, respectively. A reaction mechanism for dUMP hydrolysis is proposed.

Substrate Electronics Dominate the Rate of Reductive Dehalogenation Promoted by the Flavin-Dependent Iodotyrosine Deiodinase.

Iodotyrosine deiodinase (IYD) is unusual in its reliance on flavin to promote reductive dehalogenation of halotyrosines under aerobic conditions. Applications of this activity can be envisioned for bioremediation, but expansion of its specificity requires an understanding of the mechanistic steps that limit the rate of turnover. Key processes capable of controlling steady-state turnover have now been evaluated and described in this study. While proton transfer is necessary for converting the electron-rich substrate into an electrophilic intermediate suitable for reduction, kinetic solvent deuterium isotope effects suggest that this process does not contribute to the overall efficiency of catalysis under neutral conditions. Similarly, reconstituting IYD with flavin analogues demonstrates that a change in reduction potential by as much as 132 mV affects kcat by less than 3-fold. Furthermore, kcat/Km does not correlate with reduction potential and indicates that electron transfer is also not rate determining. Catalytic efficiency is most sensitive to the electronic nature of its substrates. Electron-donating substituents on the ortho position of iodotyrosine stimulate catalysis and conversely electron-withdrawing substituents suppress catalysis. Effects on kcat and kcat/Km range from 22- to 100-fold and fit a linear free-energy correlation with a ρ ranging from -2.1 to -2.8 for human and bacterial IYD. These values are consistent with a rate-determining process of stabilizing the electrophilic and nonaromatic intermediate poised for reduction. Future engineering can now focus on efforts to stabilize this electrophilic intermediate over a broad series of phenolic substrates that are targeted for removal from our environment.

Solvent Deuterium Isotope Effects of Substrate Reduction by Nitrogenase from Azotobacter vinelandii.

The mechanism of nitrogenase, the enzyme responsible for biological nitrogen fixation, has been of great interest for understanding the catalytic strategy utilized to reduce dinitrogen to ammonia under ambient temperatures and pressures. The reduction mechanism of nitrogenase is generally envisioned as involving multiple cycles of electron and proton transfers, with the known substrates requiring at least two cycles. Solvent kinetic isotope effect experiments, in which changes of reaction rates or product distribution are measured upon enrichment of solvent with heavy atom isotopes, have been valuable for deciphering the mechanism of complex enzymatic reactions involving proton or hydrogen transfer. We report the distribution of ethylene, dihydrogen, and methane isotopologue products measured from nitrogenase-catalyzed reductions of acetylene, protons, and cyanide, respectively, performed in varying levels of deuterium enrichment of the solvent. As has been noted previously, the total rate of product formation by nitrogenase is largely insensitive to the presence of D2O in the solvent. Nevertheless, the incorporation of H/D into products can be measured for these substrates that reflect solvent isotope effects on hydrogen atom transfers that are faster than the overall rate-determining step for nitrogenase. From these data, a minimal isotope effect is observed for acetylene reduction (1.4 ± 0.05), while the isotope effects for hydrogen and methane evolution are significantly higher at 4.2 ± 0.1 and 4.4 ± 0.1, respectively. These results indicate that there are pronounced differences in the sensitivity to isotopic substitution of the hydrogen atom transfer steps associated with the reduction of these substrates by nitrogenase.

Nitrogen-doped biochar as peroxymonosulfate activator to degrade 2,4-dichlorophenol: Preparation, properties and structure–activity relationship

Nitrogen-doped biochar (NCMs) has shown great potential as metal-free catalysts for persulfates. To understand the evolution law of properties of NCMs with preparation conditions, eleven NCMs were prepared and characterized by EA, BET, Raman, XPS, and conductivity. Surface area and conductivity can be improved by higher pyrolysis temperature and longer retention time. Distribution of nitrogen species of NCMs was greatly influenced by pyrolysis temperature. Subsequently, these NCMs were applied to activate peroxymonosulfate to degrade 2,4-dichlorophenol. A linear correlation of the initial apparent degradation rate constant (kobs) of 2,4-dichlorophenol with conductivity and ratio of graphitic N was newly established, revealing that conductivity and graphitic N of NCMs would be the key property deciding degradation efficiency of 2,4-dichlorophenol. Positive effect of conductivity can be ascribed to the mediated electron-transfer mechanism. Electron-transfer mechanism is also proved by quenching experiments and solvent deuterium isotope effect experiment. Graphitic N would be the main active site for PMS activation. Understanding the evolvement rule of properties of NCMs with preparation conditions combined with the correlations between reactivity and properties of NCMs is meaningful for preparation of nitrogen-doped biochar as well as the development of carbonaceous materials with high performance in persulfates-based advanced oxidation processes.

Proton Bridging in Catalysis by and Inhibition of Serine Proteases of the Blood Cascade System.

Inquiries into the participation of short hydrogen bonds in stabilizing transition states and intermediate states in the thrombin, factor Xa, plasmin and activated protein C–catalyzed reactions revealed that specific binding of effectors at Sn, n = 1–4 and S’n, n = 1–3 and at remote exosites elicit complex patterns of hydrogen bonding and involve water networks. The methods employed that yielded these discoveries include; (1) kinetics, especially partial or full kinetic deuterium solvent isotope effects with short cognate substrates and also with the natural substrates, (2) kinetic and structural probes, particularly low-field high-resolution nuclear magnetic resonance (1H NMR), of mechanism-based inhibitors and substrate-mimic peptide inhibitors. Short hydrogen bonds form at the transition states of the catalytic reactions at the active site of the enzymes as they do with mechanism-based covalent inhibitors of thrombin. The emergence of short hydrogen bonds at the binding interface of effectors and thrombin at remote exosites has recently gained recognition. Herein, I describe our contribution, a confirmation of this discovery, by low-field 1H NMR. The principal conclusion of this review is that proton sharing at distances below the sum of van der Waals radii of the hydrogen and both donor and acceptor atoms contribute to the remarkable catalytic prowess of serine proteases of the blood clotting system and other enzymes that employ acid-base catalysis. Proton bridges also play a role in tight binding in proteins and at exosites, i.e., allosteric sites, of enzymes.

Isotope effects in the tyrosinase catalysed hydroxylation of l-tyrosine methyl derivatives

ABSTRACTTo investigate isotope effects in the hydroxylation of [3′,5′-2H2]-α-methyl- and [3′,5′-2H2]-N-methyl-l-tyrosine, they were synthesised using acid catalysed isotope exchange at high temperature. The kinetic and solvent deuterium isotope effects on Vmax and Vmax/Km parameters of tyrosinase in its action on methylated derivatives of l-tyrosine were determined using the non-competitive spectrophotometric method. Lineweaver–Burk plots were used to consider the inhibition type of O-methyl-l-tyrosine, revealing that it is an uncompetitive inhibitor of tyrosinase.

Oxidation of Organic Compounds in Water by Unactivated Peroxymonosulfate.

Peroxymonosulfate (HSO5- and PMS) is an optional bulk oxidant in advanced oxidation processes (AOPs) for treating wastewaters. Normally, PMS is activated by the input of energy or reducing agent to generate sulfate or hydroxyl radicals or both. This study shows that PMS without explicit activation undergoes direct reaction with a variety of compounds, including antibiotics, pharmaceuticals, phenolics, and commonly used singlet-oxygen (1O2) traps and quenchers, specifically furfuryl alcohol (FFA), azide, and histidine. Reaction time frames varied from minutes to a few hours at pH 9. With the use of a test compound with intermediate reactivity (FFA), electron paramagnetic resonance (EPR) and scavenging experiments ruled out sulfate and hydroxyl radicals. Although 1O2 was detected by EPR and is produced stoichiometrically through PMS self-decomposition, 1O2 plays only a minor role due to its efficient quenching by water, as confirmed by experiments manipulating the 1O2 formation rate (addition of H2O2) or lifetime (deuterium solvent isotope effect). Direct reactions with PMS are highly pH- and ionic-strength-sensitive and can be accelerated by (bi)carbonate, borate, and pyrophosphate (although not phosphate) via non-radical pathways. The findings indicate that direct reaction with PMS may steer degradation pathways and must be considered in AOPs and other applications. They also signal caution to researchers when choosing buffers as well as 1O2 traps and quenchers.

Determining the active site base and order of substrate addition within F420‐dependent glucose‐6‐phosphate using steady‐state and pre steady‐state kinetics and isotope effects methods

F420‐dependent glucose‐6‐phosphate dehydrogenase (FGD) is a Mycobacterial enzyme that catalyzes the conversion of glucose‐6‐phosphate (G6P) to 6‐phosphogluconolactone using oxidized F420. This enzyme is important within Mycobacteria tuberculosis, which is the causative agent of tuberculosis disease. Our work has focused on probing the FGD reaction mechanism using kinetic and isotope effects methods. Based upon a previous crystal structure FGD, there were two conserved amino acids, His40 and Glu109, which were we believed to function as the active site base and acid, respectively. Based upon pH profiles, we have determined that while Glu109 does serve as the active site acid, H40 does not serve as the active site base. We have identified several other amino acid candidates that could act as the active site base and will be discussed. A concurrent goal was to probe the FGD reaction mechanism using dead‐end inhibition experiments, along with solvent and substrate deuterium isotope effects studies. The dead‐end inhibition studies were conducted using the competitive inhibitor, citrate. The data revealed competitive and uncompetitive inhibition patterns for G6P and F420 respectively, thus suggesting a mechanism of ordered addition of substrates in which the F420 cofactor must first bind to FGD before G6P binding. Our proton inventory data yielded a fractionation factor of 0.37, suggesting that the single proton responsible for the observed solvent kinetic isotope effect is likely donated by Glu109 and protonates the cofactor at position N1. The steady state substrate deuterium isotope effects studies using G6P and G6P‐d1 yielded kinetic isotope effect (KIE) of 1.1 for both kcat and kcat/Km, while the pre‐steady state KIE on kobs was 1.4. Because the hydride transferred to C5 of F420 was targeted for isotopic substitution, these KIE values provide further evidence to support our findings that hydride transfer is likely not rate‐limiting in the FGD reaction.Support or Funding InformationThis work was supported by NIH Grant 1R15GM113223‐01A1 (to KJW) and the Health Research Council of New Zealand Grant HRC 12/1111 (to E.N.B.)This abstract is from the Experimental Biology 2018 Meeting. There is no full text article associated with this abstract published in The FASEB Journal.

Mechanistic insights into F420-dependent glucose-6-phosphate dehydrogenase using isotope effects and substrate inhibition studies

F420-dependent glucose-6-phosphate dehydrogenase (FGD) is involved in the committed step of the pentose phosphate pathway within mycobacteria, where it catalyzes the reaction between glucose-6-phosphate (G6P) and the F420 cofactor to yield 6-phosphogluconolactone and the reduced cofactor, F420H2. Here, we aim to probe the FGD reaction mechanism using dead-end inhibition experiments, as well as solvent and substrate deuterium isotope effects studies. The dead-end inhibition studies performed using citrate as the inhibitor revealed competitive and uncompetitive inhibition patterns for G6P and F420 respectively, thus suggesting a mechanism of ordered addition of substrates in which the F420 cofactor must first bind to FGD before G6P binding. The solvent deuterium isotope effects studies yielded normal solvent kinetic isotope effects (SKIE) on kcat and kcat/Km for both G6P and F420. The proton inventory data yielded a fractionation factor of 0.37, suggesting that the single proton responsible for the observed SKIE is likely donated by Glu109 and protonates the cofactor at position N1. The steady state substrate deuterium isotope effects studies using G6P and G6P-d1 yielded KIE of 1.1 for both kcat and kcat/Km, while the pre-steady state KIE on kobs was 1.4. Because the hydride transferred to C5 of F420 was the one targeted for isotopic substitution, these KIE values provide further evidence to support our previous findings that hydride transfer is likely not rate-limiting in the FGD reaction.

Investigating the GCN5 Histone Acetyltransferase Chemical Mechanism

Enzyme catalyzed protein acetylation involves the transfer of an acetyl group to a lysine side chain within the substrate. This process serves many vital cellular purposes including the regulation of gene expression and controlling of the circadian rhythm. Defects in enzymatic acetylation have been linked to many common diseases such as cancer, insomnia, and anemia. Despite decades of research into the biological function of protein acetylation, the enzymatic mechanism of acetyl‐transfer is unknown. We have worked to characterize the mechanism of acetyl‐transfer utilized by the yeast protein acetyltransferase General Control Nonderepressible 5 (GCN5) using deuterium solvent isotope effects, Brønsted‐beta analysis, and competitive inhibition studies. These analyses have allowed us to characterize the occurrence of proton transfer during catalysis as well as gain a general knowledge of the transition state structure. These results will be coupled with QM/MM computational modeling of the GCN5 acetyl‐transfer reaction in order to gain an explicit understanding of the mechanism of catalysis. The collection of these results set the groundwork for further investigation into the catalysis mechanisms of other acetyltransferases and may aid in development of treatment for acetyl‐transfer associated illness.Support or Funding Information‐Jeffress Trust Awards Program in Interdisciplinary Research‐NSF REU: CHE‐1461175

Solvent and α-secondary kinetic isotope effects on β-glucosidase

β-Glucosidase from sweet almond is a retaining, family 1, glycohydrolase. It is known that glycosylation of the enzyme by aryl glucosides occurs with little, if any, acid catalysis. For this reaction both the solvent and α-secondary kinetic isotope effects are 1.0. However, for the deglucosylation reaction (e.g., kcat for 2,4-dinitrophenyl-β-D-glucopyranoside) there is a small solvent deuterium isotope effect of 1.50 (±0.06) and an α-secondary kinetic isotope effect of 1.12 (±0.03). For aryl glucosides, kcat/KM is very sensitive to the pKa of the phenol leaving group [βlg≈−1; Dale et al., Biochemistry25 (1986) 2522–2529]. With alkyl glucosides the βlg is smaller (between −0.2 and −0.3) but still negative. This, coupled with the small solvent isotope effect on the pH-independent second-order rate constant for the glucosylation of the enzyme with 2,2,2-trifluoroethyl-β-glucoside [D2O(kcat/KM)=1.23 (±0.04)] suggests that there is more glycone–aglycone bond fission than aglycone oxygen protonation in the transition state for alkyl glycoside hydrolysis. The kinetics constants for the partitioning (between water and various alcohols) of the glucosyl-enzyme intermediate, coupled with the rate constants for the forward (hydrolysis) reaction provide an estimate of the stability of the glucosyl-enzyme intermediate. This is a relatively stable species with an energy about 2 to 4kcal/mol higher than that of the ES complex. This article is part of a Special Issue entitled: Enzyme Transition States from Theory and Experiment.

Targeting metallo-carbapenemases via modulation of electronic properties of cephalosporins.

The global proliferation of metallo-carbapenemase-producing Enterobacteriaceae has created an unmet need for inhibitors of these enzymes. The rational design of metallo-carbapenemase inhibitors requires detailed knowledge of their catalytic mechanisms. Nine cephalosporins, structurally identical except for the systematic substitution of electron-donating and withdrawing groups in the para position of the styrylbenzene ring, were synthesized and utilized to probe the catalytic mechanism of New Delhi metallo-β-lactamase (NDM-1). Under steady-state conditions, K(m) values were all in the micromolar range (1.5-8.1 μM), whereas k(cat) values varied widely (17-220 s(-1)). There were large solvent deuterium isotope effects for all substrates under saturating conditions, suggesting a proton transfer is involved in the rate-limiting step. Pre-steady-state UV-visible scans demonstrated the formation of short-lived intermediates for all compounds. Hammett plots yielded reaction constants (ρ) of -0.34 ± 0.02 and -1.15 ± 0.08 for intermediate formation and breakdown, respectively. Temperature-dependence experiments yielded ΔG(‡) values that were consistent with the Hammett results. These results establish the commonality of the formation of an azanide intermediate in the NDM-1-catalysed hydrolysis of a range cephalosporins with differing electronic properties. This intermediate is a promising target for judiciously designed β-lactam antibiotics that are poor NDM-1 substrates and inhibitors with enhanced active-site residence times.

Catalytic mechanism of bacteriophage T4 Rad50 ATP hydrolysis.

Spontaneous double-strand breaks (DSBs) are one of the most deleterious forms of DNA damage, and their improper repair can lead to cellular dysfunction. The Mre11 and Rad50 proteins, a nuclease and an ATPase, respectively, form a well-conserved complex that is involved in the initial processing of DSBs. Here we examine the kinetic and catalytic mechanism of ATP hydrolysis by T4 Rad50 (gp46) in the presence and absence of Mre11 (gp47) and DNA. Single-turnover and pre-steady state kinetics on the wild-type protein indicate that the rate-limiting step for Rad50, the MR complex, and the MR-DNA complex is either chemistry or a conformational change prior to catalysis. Pre-steady state product release kinetics, coupled with viscosity steady state kinetics, also supports that the binding of DNA to the MR complex does not alter the rate-limiting step. The lack of a positive deuterium solvent isotope effect for the wild type and several active site mutants, combined with pH-rate profiles, implies that chemistry is rate-limiting and the ATPase mechanism proceeds via an asymmetric, dissociative-like transition state. Mutation of the Walker A/B and H-loop residues also affects the allosteric communication between Rad50 active sites, suggesting possible routes for cooperativity between the ATP active sites.

Tyrosine oxidation in heme oxygenase: examination of long-range proton-coupled electron transfer.

Heme oxygenase is responsible for the degradation of a histidine-ligated ferric protoporphyrin IX (Por) to biliverdin, CO, and the free ferrous ion. Described here are studies of tyrosyl radical formation reactions that occur after oxidizing Fe(III)(Por) to Fe(IV)=O(Por(·+)) in human heme oxygenase isoform-1 (hHO-1) and the structurally homologous protein from Corynebacterium diphtheriae (cdHO). Site-directed mutagenesis on hHO-1 probes the reduction of Fe(IV)=O(Por(·+)) by tyrosine residues within 11 Å of the prosthetic group. In hHO-1, Y58· is implicated as the most likely site of oxidation, based on the pH and pD dependent kinetics. The absence of solvent deuterium isotope effects in basic solutions of hHO-1 and cdHO contrasts with the behavior of these proteins in the acidic solution, suggesting that long-range proton-coupled electron transfer predominates over electron transfer.

Reaction Mechanism Studies Involving the Correlation of the Rates of Solvolysis of Benzoyl andP-NitrobenzoylP-Toluenesulfonates

The solvolyses of benzoyl and p-nitrobenzoyl p-toluenesulfonates (tosylates) are considerably slower than those of the previously studied mixed anhydride of acetic and p-toluenesulfonic acids (acetyl tosylate), which, even with application of rapid-response conductivity could only be studied at considerably reduced temperatures. For the presently studied compounds, the specific rates over a wide variety of solvents could be conveniently studied at −10 °C. For solvolyses of benzoyl tosylate, application of the extended (two-term) Grunwald-Winstein equation gives sensitivities to changes in solvent nucleophilicity and solvent ionising power consistent with an ionisation (SNl) pathway Indeed, a good correlation is obtained against only solvent ionising power. For the solvolyses of the p-nitro-derivative, very different sensitivities are obtained, with an appreciable dependence on solvent nucleophilicity, and a dominant biomolecular pathway for the substitution is proposed for all of these solvolyses, except for those in solvents rich in fluoroalcohol. Studies of solvent deuterium isotope effects in methanolysis, of leaving-group effects relative to a halide and of temperature variation effects are consistent with the proposed mechanistic pathways.

Reaction mechanism of zinc-dependent cytosine deaminase from Escherichia coli: a quantum-chemical study.

The reaction mechanism of cytosine deaminase from Escherichia coli is studied using density functional theory. This zinc-dependent enzyme catalyzes the deamination of cytosine to form uracil and ammonia. The calculations give a detailed description of the catalytic mechanism and establish the role of important active-site residues. It is shown that Glu217 is essential for the initial deprotonation of the metal-bound water nucleophile and the subsequent protonation of the substrate. It is also demonstrated that His246 is unlikely to function as a proton shuttle in the nucleophile activation step, as previously proposed. The steps that follow are nucleophilic attack by the metal-bound hydroxide, protonation of the leaving group assisted by Asp313, and C-N bond cleavage. The calculated overall barrier is in good agreement with the experimental findings. Finally, the calculations reproduce the experimentally determined inverse solvent deuterium isotope effect, which further corroborates the suggested reaction mechanism.

Deuterium isotope effect on the suicide inactivation of tyrosinase in its action on o‐diphenols

A solvent deuterium isotope effect on the inactivation suicide of tyrosinase in its action on o-diphenols (catechol, 4-methylcatechol, and 4-tert-butylcatechol) was observed. This isotope effect, observed during kinetic studies in the transition phase, was higher than that described previously in the steady state, indicating that there is an additional slow step in the suicide inactivation mechanism, which we believe to be responsible for the inactivation. In a proton inventory study of oxidation of o-diphenols, the representation of λmax(D,fn)/λmax(D,f0) versus n (atom fractions of deuterium), where λmax(D,fn) is the maximum apparent inactivation constant for a molar fraction of deuterium (n) and λmax(D,f0) is the corresponding kinetic parameter in a water solution, was linear for all substrates. This suggests that only one of the protons transferred from the two hydroxyl groups of the substrate, which are oxidized in one turnover, is responsible for the isotope effects. We propose that this proton could be the proton transferred from the hydroxyl group of C-2 to the hydroperoxide of the oxytyrosinase form (Eox ) and that it probably causes enzyme inactivation through the reduction of the Cu(2+) A to Cu(0) and its subsequent release from the active site.