Solution For Reuse Research Articles

Memoization in Model Checking for Safety Properties with Multi-Swarm Particle Swarm Optimization

In software engineering, errors or faults in software systems often lead to critical social problems. One effective methodology to tackle this problem is model checking, which is an automated formal verification technique. In traditional model checking, the task of finding specification errors is reduced to deterministic search techniques such as Depth-First Search. Recent research has shown that swarm intelligence offers a powerful search capability compared to traditional techniques. In particular, multi-swarm Particle Swarm Optimization is known to be efficient and can mitigate the state-space explosion problem, i.e., the exponential increase in the search space with a linear increase in the problem size. However, the state-space explosion problem is still significant when verifying very large systems. Further performance improvement is needed. To achieve this, we propose a novel memoization or cache mechanism for storing tentative solutions for reuse in the later stages of the search procedure. For each stage, a candidate solution computed by a swarm is summarized efficiently and heuristically to consolidate similar solutions into a single representative solution. We store the summary and its associated solutions in key-value maps. Instead of computing known solutions repeatedly, we retrieve the solution if the stored key matches the summary. We incorporated the proposed mechanism into a model-checking technique with multi-swarm Particle Swarm Optimization and evaluated the search performance. We show in this paper that the proposed mechanism improved time and space consumption while maintaining solution quality.

Influence of ZrO2 nanoparticles on the structural and photocatalytic properties of three-dimensional PVA/g-C3N4 polymer films

This study introduces a novel polymer nanocomposite film of polyvinyl alcohol (PVA), carbon nitride (g-C3N4), and zirconia (ZrO2), created via solution casting for effective water remediation of organic dyes. The film shows significant potential for enhancing pollutant removal efficiency and offering a sustainable solution for water reuse. Comprehensive characterization using FTIR, XRD, UV–vis, TGA, and FESEM-EDX indicated strong interfacial interactions among PVA, ZrO2, and g-C3N4. XPS and UV–vis spectroscopy revealed a reduction in the optical energy gap from 4.8 to 3.95 eV, enhancing photocatalytic activity. SEM confirmed uniform dispersion of ZrO2 and g-C3N4 within the PVA matrix. Kinetic studies of methylene blue (MB) degradation under solar irradiation at neutral pH showed rate constants (k) of 0.0032 min−1, 0.0094 min−1, 0.0383 min−1, and 0.0816 min−1 for PVA, PVA/(0.003)ZrO2/g-C3N4, PVA/(0.007)ZrO2/g-C3N4, and PVA/(0.01)ZrO2/g-C3N4, respectively. The corresponding half-life times (t1/2) were 216.6 min, 73.7 min, 18.1 min, and 8.5 min, with photodegradation efficiencies of 10 %, 75.2 %, 90 %, and 95 %. This recyclable nanocomposite polymer, PVA/ZrO2/g-C3N4, shows promise for effective decontamination of organic pollutants in water, presenting an innovative approach for advanced remediation and secure wastewater recycling.This work is crucial for society as it contributes to solving the global challenge of water pollution, ensuring access to clean and safe water.

Recent development of substrates for immobilization of bimetallic nanoparticles for wastewater treatment: a review.

Bimetallic nanoparticles (BMNPs) have gained considerable attention due to their remarkable catalytic properties, making them invaluable in wastewater treatment applications. One of these challenges lies in the propensity of BMNPs to aggregate due to Van der Waals interactions, which can reduce their overall performance. Additionally, retrieving exhausted NPs from the treated solution for subsequent reuse remains a significant hurdle. Moreover, the leaching of NPs into the discharged wastewater can have harmful effects on humans as well as aquatic life. To overcome these issues, various substrates have been researched to maximize the efficiency and stability of the NPs. This review paper delves into the pivotal role of various substrates in immobilizing BMNPs, providing a comprehensive analysis of their performances, advantages, and drawbacks. The substrates encompass a diverse range of materials, including organic, inorganic, organic-inorganic, beads, fibers, and membranes. Each substrate type offers unique attributes, influencing the stability, efficiency, and recyclability of BMNPs. This review paper aims to provide an up-to-date and detailed analysis and comparison of the substrates used for the immobilization of BMNPs. This work further reviews the underlying mechanisms of the composites involved in treating pollutants from wastewater and how these mechanisms are enhanced by the synergistic effects produced by the substrate and BMNPs. Furthermore, the reusability and sustainability of these composites are discussed. Also, high-performing substrates are highlighted to give direction to future research focusing on the immobilization of BMNPs in the application of wastewater treatment.

Reuse of biogas sludge for the slow-release fertilizer production to improve fertilizer use efficiency and soil fertility

Fertilizer overuse causes negative impacts on the environment and crop yields. Therefore, the production of slow-release fertilizers from biogas sludge is a potential solution for waste reuse and sustainable use of fertilizers. Granular fertilizers containing primary macronutrients (N, P and K) were formulated using biogas sludge and supplementary chemical compounds before coating with a thin film of glutaraldehyde cross-linked gelatin. The coating films reduced the release rates of N and P effectively. The application of formulated biogas fertilizers resulted in the competitive yield and growth rate of mustard greens over the 45-days cultivation compared to the application of commercial fertilizers. Particularly, the application of coated biogas fertilizers led to less nutrient losses in drainage water while maintained a balanced supply of available nutrients and beneficial bacteria in soils. This study emphasizes the feasibility to reuse biogas sludge for slow-release fertilizers production in improving fertilizer use efficiency and soil fertility.

Rural electrification in Nigeria: A review of impacts and effects of frugal energy generation based on some of e-waste components

Nigeria is the seventh most populous country in world being the highest in Africa. The country is blessed with vast natural resources and is one of the highest producers of oil in the world. However, the inadequate supply of electrical energy is a major setback in the nation's economic development. Thus, there is need for an urgent and immediate solution to address the electricity access situation in Nigeria. It is in view of this that we first present an overview of the electrical energy situation of Nigeria (especially in the rural areas). The benefits of rural electrification and it impacts are discussed to buttress the need for electrifying rural areas and an overview of the abundant renewable energy resources in Nigeria is presented. As a proposed solution to improve the electricity situation, the concept of a reuse solar photovoltaic system based on e-waste components and old materials is presented. The system comprises repurposed Power Supply Unit (PSU) from old desktop computers, old thermal car Lead-acid batteries, old solar panels and Uninterruptible Power Supply (UPS) units. The possibility of adopting this solution in Nigeria depends on the amount of e-wastes generated annually thus necessitating the need for an analysis to see the annual impact of this system on electricity access based on the amount of available e-waste. Using the huge amount of e-waste generated/received annually in Nigeria, the feasibility of our solution is assessed by estimating the possible number of households that could be electrified by the second life renewable energy systems we propose. Due to the lack of official data in this field, certain constraints and assumptions were defined for the purpose of this analysis which resulted in obtaining a range of results that showed the possible impacts of adopting the reuse system. The analysis showed the minimum and maximum impacts the reuse solution could have on electricity access in Nigeria, based on best and worst case scenario respectively. The results further showed that an average of 287,000 households can be electrified annually if this solution is adopted, causing 2.2 % increment in population with electricity access in a year (between 620 thousand and 4.1 million individuals). Thus, the result is an indication that it is possible to achieve immediate growth in electricity access based on renewable energy integration, frugal innovation and reuse/repurposing of e-waste materials. In addition, this extension of their lifespan reduces their ecological footprint. It is expected that the energy demands of the continuously growing population can be met by strict adherence to set targets including adoption of smart-grids, generation diversification and focusing on rural electrification.

Novel collector design and optimized photo-fenton model for sustainable industry textile wastewater treatment

Textile industry wastewater containing toxic dyes and high COD poses environmental hazards and requires treatment before discharge. This study addresses the challenge of treating complex textile wastewater using a novel integrated system. The system combines sedimentation, screening, adsorption, and an optimized solar photo-Fenton process to provide a sustainable treatment solution. A novel parabolic collector with a larger absorber tube diameter enhances solar radiation utilization at lower catalyst concentrations. This design is versatile, treating all types of wastewaters, especially those that contain colors, smells, solid and suspended materials, in addition to its importance for the treatment of difficult substances that may be present in industrial and sewage wastewaters that are difficult to dispose of by traditional treatment methods. Multivariate experiments optimized key photo-Fenton parameters (pH, catalyst dose, etc.) achieving significant pollutant removal (85% COD, 82% TOC, complete color) under specific conditions (pH 3, 0.2 g/L Fe(II), 1 mL/L H2O2, 40 °C and 100 L/h flow rate after 60 min irradiation). Kinetic modeling revealed second-order reaction kinetics, and multivariate regression analysis led to the development of models predicting treatment efficiency based on process factors. The key scientific contributions are the integrated system design combining conventional and advanced oxidation technologies, novel collector configuration for efficient utilization of solar radiation, comprehensive process optimization through multivariate experiments, kinetic modeling and predictive modeling relating process factors to pollutant degradation. This provides an economical green solution for textile wastewater treatment and reuse along with useful design guidelines. The treatment methodology and modeling approach make valuable additions for sustainable management of textile industry wastewater.

Should wastewater treatment plants' operational mode radically change to minimize GHG emissions?

The operation of municipal wastewater treatment plants (WWTPs) invariably results in significant emission of greenhouse gases (i.e., CH4, N2O, and CO2) into the atmosphere. We propose to consider a radical change in the way municipal WWTPs are operated, with the aim of minimizing GHG emissions while recycling most of the nutrient mass. The means to this end are to reduce the WWTP energy demand while maximizing the recovery of resources (phosphorus, ammonia, methane). The suggested concept involves operating the activated sludge process at a low sludge retention time (SRT < 2 d), i.e., under conditions that maximize the heterotrophic mass yield and eliminate nitrification. The ammonia concentration that remains in the water (considering N in the excess sludge and struvite production in the sludge-dewatering supernatant line) would be separated from the WWTP effluents using a unique ion-exchange material (ZnHCF), which would be regenerated using a low-volume 4 M NaCl solution. The ammonia would be then stripped at high pH and re-adsorbed by an acidic solution for reuse as fertilizer. The high bacterial yield and lack of nitrification in the aerobic step are expected to boost methane yield 3–4-fold, induce lower oxygen consumption, and most importantly, yield much lower N2O release. An approximate energy mass balance shows the concept to merit further consideration, owing to the potential significant reduction in N2O(g) emissions and recovery of resources. Empirical work followed by LCA is required to corroborate the hypothesis presented herein.

A Master’s Course Can Emphasize Circular Economy in Municipal Solid Waste Management: Evidence from the University of Pisa

Municipal solid waste (MSW) represents a significant global threat, which has to be managed by a model of production and consumption involving the sharing, leasing, reusing, repairing, refurbishing, and recycling of existing materials and products for as long as possible, otherwise known as a circular economy (CE). However, there is not a universal rule for waste recycling strategies, and it has been demonstrated that active public participation is crucial in the satisfactory management of waste. In this context, citizen participation and education are two interrelated approaches, which can help to engage and inform people regarding waste and its wider impact. The present study describes the development of an interdisciplinary hackathon (hackathons are events whereby individuals from different backgrounds are brought together to work on the solutions to different problems), targeted to students of a postgraduate Master’s course on Sustainable Development and Climate Change in order to develop and understand the MSW problems and priorities currently being targeted, with the aim to propose new potential solutions for MSW reduction, reuse, and recycling. Following an empirical approach, four working groups were established and assigned the following specific tasks: (i) communication/citizen education on MSW; (ii) the reduction of MSW production; (iii) innovative solutions to recover and enhance secondary raw materials deriving from MSW processing; and (iv) the eco-design of the cities of the future concerning CE principles applied to MSW recycling. Overall, the following main findings were derived from the hackathon event: (i) an essential objective of the CE strategy is to drive Europe’s internal market towards the production and consumption of more sustainable products, thus reducing environmental and social pressures, while still retaining value; (ii) the most effective ways of tackling environmental problems are to ‘change the way we consume’, as well as to ‘change the way we produce and trade’, with the responsibility shared between businesses, governments, and the EU, as well as the citizens themselves. In this scenario, research and innovation play a key role in driving the necessary systemic changes to reach climate neutrality and ensure an inclusive ecological and economic transition. Overall, the present study confirms how the hackathon represents an effective tool to engage citizens in participation and education.

Selective adsorption in ion exchange membranes: The effect of solution ion composition on ion partitioning

Electrodialysis is a water desalination technology that enables selective separation of ions, making it a promising solution for sustainable water reuse. The selectivity of the process is mainly determined by the properties of ion exchange membranes that can vary depending on the composition of ions in water, such as water uptake and charge density. In this work, we studied selective adsorption of Na+ and K+ ions in various ion exchange membranes considering the effect of solution ion composition on membrane water volume fraction. For that purpose, we conducted membrane adsorption experiments using solutions with Na+ and K+ ions with different ion compositions including Li+, Ca2+ or Mg2+ ions at different concentrations (0.001 – 0.25 M). The experiments showed that with the total ion concentration and the amount of divalent ions in solution, the membrane water volume fraction decreases while the selective adsorption of the smaller (hydrated) K+ ions over the Na+ ions in the membrane increases. We developed a theoretical framework based on Boublik-Mansoori-Carnahan-Starling-Leland (BMCSL) theory to describe the effect of membrane water volume fraction on selective adsorption of the ions by including volumetric effects, such as size exclusion. The developed framework was used to describe ion partitioning results of the membrane adsorption experiments. In addition, the effect of solution ion composition on selective ion removal during electrodialysis operation was evaluated using experimental data and theoretical calculations. The results of this study show that considering volumetric effects can improve the ion partitioning description in ion exchange membranes for solutions with various ion compositions.

Participatory evaluation of cultural heritage adaptive reuse interventions in the circular economy perspective: A case study of historic buildings in Salerno (Italy)

Adaptive reuse of cultural heritage can be a valid strategy to recover heritage buildings in a state of abandonment or underuse, as well as to implement the circular economy model in cities and regions, contributing to the achievement of climate objectives, to social cohesion, wellbeing and quality of life, making cities more attractive, safe, sustainable and resilient. The aim of this paper is to develop and test an ex-ante evaluation methodology to support participatory decision-making processes for the adaptive reuse of cultural heritage according to the circular economy perspective. A multidimensional and multicriteria evaluation framework was experimented in the city of Salerno, Italy, to assess alternative solutions for the adaptive reuse of four large historic buildings in abandonment, and identify a satisfying solution based on interactions with local stakeholders. The TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) multi-criteria evaluation method was used to compare adaptive reuse project alternatives including stakeholder objectives and preferences. Starting from 14 adaptive reuse proposals, the participative evaluation methodology supported stakeholders in the identification of 4 preferable solutions further developed and co-designed, as well as in the search of a final satisfying solution engaging diverse stakeholders groups. Moreover, operational circularity criteria for the adaptive reuse of cultural heritage were identified. The results of the study show the potential of Multi-Criteria Decision Analysis (MCDA) mixed with participative methods for co-design and co-evaluation to support inclusive decision-making processes for circular adaptive reuse of cultural heritage.

Stormwater Runoff Control and Water Resource Utilization Technology of Central China Normal University Based on Stormwater Flood Management Modeling

In recent years, more and more prominent urban flooding problems on campus drainage system planning and design put forward higher requirements. Sudden rainfall can have multiple negative impacts on campuses, but it is also an excellent opportunity to utilize rainwater resources. At present, the peak flow rate of urban drainage system in China is still mainly calculated by the inference formula method, and the design return period of municipal drainage system is also low, which may lead to campus flooding in case of large rainstorms. In this paper, using the Stormwater Flood Management Model (SWMM) as a platform, the Central China Normal University (CCNU) was selected to simulate the summer stormwater runoff process, and three different combinations of low-impact development (LID) facilities were applied to the campus stormwater runoff control, and the control effects of the different combinations on the flood peak flow abatement were compared. The results show that the selected LID deployment scheme is better than the single facility control effect. Finally, based on the results of the study, a technical solution for rainwater collection and reuse based on sponge campus was proposed to renovate and design the campus landscape of Central China Normal University. The economic, social and environmental benefits are significant and can provide a reference for rainwater collection on other campuses.

Microwave deicing properties and carbon emissions assessment of asphalt mixtures containing steel slag towards resource conservation and waste reuse

A large amount of solid waste, such as steel slag (SS), is generated annually. At the same time, the shortage of road construction materials is becoming a concern. In this study, to recycle and reuse SS as a substitute for natural aggregates to achieve resource conservation and sustainable development of roads were conducted. First, the electromagnetic performance of SS was explored to evaluate its wave-absorbing properties. Next, the effect of different SS contents on heating properties, surface temperature, heating uniformity, and ice melting time (IMT) were investigated. Finally, the carbon emissions assessment (CEA) of conventional asphalt mixture (CAM) and steel slag asphalt mixture (SSAM) was compared. Results indicated that SS has ferromagnetic behavior and higher electromagnetic parameters, showing better wave-absorbing properties than limestone. There were three stages during microwave heating (MH): ice melting, moisture emitting, and stabilization. In addition, heating uniformity tends to be poor with the increase of SS, and samples with 100 % content of SS have the highest standard deviation of 21.04 °C and 20.77 °C after 270 s at −10 °C and − 20 °C. Samples containing 50 % SS have the best microwave deicing properties, which can reduce the IMT by 28.57 % to 46.18 % at different initial freezing temperatures and ice thickness compared to CAM. Furthermore, CEA revealed that CAM and SSAM's carbon emissions over road construction's life cycle are similar (around 27,000 kg) and originate mainly from the mixing and raw material extraction phases. However, SSAM leads to better environmental and economic benefits and provides an exemplary resource conservation and waste reuse solution.

Alkali activation-induced cold consolidation of waste glass: Application in organic-free direct ink writing of photocatalytic dye destructors

Additive manufacturing, with its ability to assemble a variety of materials in complex and customized architectures, is developing rapidly. The integration of technologies and materials into a sustainable production, however, is still challenging. The present investigation offers new functional glass-based products, from nearly room temperature processing, based on direct ink writing (DIW) of pastes from ‘light’ alkali activation (2.5 M NaOH) of pharmaceutical glass waste, added with 20 wt% of TiO2 nanoparticles. The inks were refined by the inclusion of porous glass microspheres (PGMs, 20–30 wt%), previously fabricated from fiber glass waste. Printed scaffolds, stabilized by simple drying (i.e. ‘unfired’), were successfully applied in the photodegradation of methylene blue. The degradation efficiency reached 100% within 75 min, and the 3D-printed composites could be easily separated from the solution for subsequent reuse. The degradation efficiency declined only by 7.5%, after 5 cycles.

Exploring capacities, environmental benefits and potential for a circular economy on waste plastic bottles in Hong Kong

This paper explores capacities, benefits and potential for a circular economy on waste plastic beverage containers in Hong Kong. Regarding existing circular capacities, we show that a pilot subsidy for selected recyclers achieved a plastic bottle recovery rate of 3 %. Its extension to all active recyclers would raise the recovery rate to 23 %. The analysis of circular benefits uses a dynamic life-cycle assessment along the Shared Socio-economic Pathways. It demonstrates that replacing single-use containers with reusable ones would achieve substantial impact reductions, e.g. 81 % for CO2 and 88 % for PM2.5 amongst others. When assessing potential for a circular transition in beverage container management, mapping stakeholder interests shows that the government's expressed preference for recycling is not shared by other groups. Rather, societal and corporate stakeholders’ strong preference for refuse and reuse solutions underscores that higher-ranking circular approaches like a plastic tax or even a selective ban would enjoy public support.

Defining methods for architectural and planning organization of temporary settlements for internally displaced persons in Ukraine

This article analyzes the main issues of architectural and planning organization of temporary settlements for internally displaced persons. It identifies the current demands for increased flexibility and resilience in planning and explores a new type of temporary housing with a progressive (permanent) core. Special attention is given to incremental design and participation as methods of uniting the efforts of designers, communities, and governments into a single strategy for providing sustainable housing for affected populations. A review of the research revealed two main problems in the strategic planning of housing assistance: the issue of stability in the concept of "temporary housing" and the challenge of flexible planning solutions. In response to this, the introduction of new transitional types - "transitional shelters" designed using materials and structures that can be upgraded or reused in more permanent housing units, and "progressive shelters" - stationary, rapidly deployable shelters on designated land (with appropriate zoning) intended for future conversion into permanent housing units. In a methodological sense, both types feature a permanent, stable core and temporary residential volumes or structures that gradually evolve into a permanent living environment—a concept known as incremental architecture. It changes the morphological understanding of temporary housing, allowing it to be engaged at all stages of housing assistance alongside participatory methods and "advocacy planning" that regulate the involvement of communities and affected populations in planning activities together with specialists and local authorities. The experience of rebuilding the affected city of Constitution in Chile has shown that these methods can enhance the flexible nature of architecture (its planning possibilities and solutions for reuse and reconfiguration) and potentially create new values of permanence. Additionally, a review of the existing Ukrainian experience has revealed a lack of tools for uniting the efforts of designers, communities, and the government into a single strategy for temporary housing policy, thus preventing temporary shelter and housing facilities from meeting all the necessary (social, cultural, and infrastructural) needs of residents. This implies that a polyvalent strategy may be recommended for affected rural communities, simultaneously satisfying the needs of permanent residents and providing affected communities with temporary homes with the potential for permanent residency, as it is impossible to accurately assess the terms of temporary housing use and population repatriation until the end of hostilities.

An efficient UV-C device for photoinactivation of human Corona and Influenza virus: Solution for small-scale reuse of personal protective equipment (PPE)

The world has recently witnessed a significant surge in the use of non-recyclable items such as Personal Protective Equipment (PPE) due to the COVID-19 pandemic. This has increased environmental pollution and caused a massive burden on the global waste management system. Hence, an effective strategy to address the demand-supply disparity and provide road map for sustainable management of used PPE are the need of the hour. In the present work, we aimed to develop a cost-effective, convenient, and effective strategy to safely reuse PPE by engineering an in-house UV-C-based Sanitization Device (UVSD) and systematically evaluating its potential to disinfect virus-contaminated PPE. To this end, we tested the capacity of the UVSD to disinfect single-use PPE and N95 face masks, experimentally soiled with the human Influenza (A/PR/8/1934/H1N1) and human Coronavirus (HCoV-OC43). For this, the UV-C-based photoinactivation of both viruses was assessed by in vitro cell protection, quantification of viral gene transcript, and residual viral load by plaque-forming assay. Further, Indirect immunofluorescence and viral hemagglutination assays were also performed to visualize and quantify the viral titers at different post-exposure (UV-C) time points. Our results demonstrate that 15 min exposure to the virus-contaminated simple or complex PPE within the UVSD cabinet could effectively inactivate both the H1N1 and HCoV-OC43 viruses.

Eff-PCNet: An Efficient Pure CNN Network for Medical Image Classification

With the development of deep learning, convolutional neural networks (CNNs) and Transformer-based methods have become key techniques for medical image classification tasks. However, many current neural network models have problems such as high complexity, a large number of parameters, and large model sizes; such models obtain higher classification accuracy at the expense of lightweight networks. Moreover, such larger-scale models pose a great challenge for practical clinical applications. Meanwhile, Transformer and multi-layer perceptron (MLP) methods have some shortcomings in terms of local modeling capability and high model complexity, and need to be used on larger datasets to show good performance. This makes it difficult to utilize these networks in clinical medicine. Based on this, we propose a lightweight and efficient pure CNN network for medical image classification (Eff-PCNet). On the one hand, we propose a multi-branch multi-scale CNN (M2C) module, which divides the feature map into four parallel branches along the channel dimensions by a certain scale factor and carries out a deep convolution operation using different scale convolution kernels, and this multi-branch multi-scale operation effectively replaces the large kernel convolution. This multi-branch multi-scale operation effectively replaces the large kernel convolution. It reduces the computational cost of the module while fusing the feature information between different channels and thus obtains richer feature information. Finally, the four feature maps are then spliced along the channel dimensions to fuse the multi-scale and multi-dimensional feature information. On the other hand, we introduce the structural reparameterization technique and propose the structural reparameterized CNN (Rep-C) module. Specifically, it utilizes multiple linear operators to generate different feature maps during the training process and fuses all the participants into one through parameter fusion to achieve fast inference while providing a more effective solution for feature reuse. A number of experimental results show that our Eff-PCNet performs better than current methods based on CNN, Transformer, and MLP in the classification of three publicly available medical image datasets. Among them, we achieve 87.4% Acc on the HAM10000 dataset, 91.06% Acc on the SkinCancer dataset, and 97.03% Acc on the Chest-Xray dataset. Meanwhile, our approach achieves a better trade-off between the number of parameters; computation; and other performance metrics as well.

Adaptive Reuse of Heritage Buildings for Sustainable Urban Regeneration: Two Case Studies from India

In the era of globalization, developing existing cities into smart cities while providing a higher quality of life to the citizens is one of the strategies in many countries. In the process, many traditional settlements and cultural heritage are being demolished without respecting their values. In fact, these heritage buildings could be easily re-used. However, a proper approach is essential in ensuring their relevance in urban regeneration projects. Undeniably, cultural heritage should be preserved with their values. One of the ways to do so is through adaptive re-use, i.e., reusing the existing building for contemporary use, making it a part of sustainable architecture. Appropriately, the reuse of heritage buildings or materials therein saves much of the embodied energy. This will help improve access to clean energy and encourage adoption of low-carbon energy assets. The concept of adaptive reuse of different buildings has been successfully implemented in many countries. This paper examines the issue of multifaceted challenges in adaptive reuse, emphasizing the need for informed decisions based on in-depth assessments. The paper seeks to understand the compatibility of new functions with the physical and historical integrity of heritage structures, the conservation of embodied energy inherent in these buildings, and the pivotal role of stakeholders in driving successful adaptive reuse projects. It employs a mixed-method approach using case studies, stakeholder surveys, and heritage building analyses to determine best reuse solutions. The study shows how adapting old buildings saves energy and the environment by comparing them to new buildings. It concludes revealing the current efforts to provide ways of such reuse of heritage buildings based on several sustainable benchmarks and valuable considerations.

Investigation of ion-exchange membranes and erythritol concentration for the desalination of erythritol culture broth by electrodialysis

Erythritol is a zero-calorie sugar substitute, safe for people with diabetes, that occurs naturally but is also commercially produced. Erythritol produced by fermentation must be separated from the rest of the cultivation broth. Electrodialysis (ED) may be used to separate and purify extracellular fermentation products, allowing simultaneous salt removal from the cultivation broth and generation of saline concentrate solution for reuse in a subsequent fermentation process. In the first stage, this study tested the performance of three membrane stacks and compared them to a reference membrane for erythritol purification. The diffusion of products and by-products was analyzed for the synthetic broth containing 5–25 g/L of erythritol. Product and by-product losses, current efficiency and energy consumption were compared among the tested membranes for the same salt removal rate. Step-wise voltage approach was demonstrated to have fewer product losses than the ED controlled by the constant current approach. Finally, erythritol culture broth after cultivation was treated with selected membranes and ED control based on the findings from the first part of the study. The erythritol losses were only 2% for the 94.8% desalination rate.

Facile Fabrication of PANI/Fe2.85Ni0.15O4 Nanocomposites and Their Application for the Effective Degradation of Rhodamine B Dye

Nanocomposites of polyaniline (PANI)/Fe2.85Ni0.15O4 (PFN) were successfully prepared using the co-precipitation method combined with an in-situ polymerization process. The FN and PFN nanocatalysts were characterized using various methods for the photocatalytic degradation of Rhodamine B (RhB). The XRD, Raman, TEM, and DTA-DTG analyses suggest that the FN nanoparticles (NPs) were effectively coated by PANI and that there were interactions between FN and PANI. Magnetic measurements indicated that PFN nanocomposites exhibited good superparamagnetic behavior and high saturation magnetization (39.5–57.6 emu/g), which are suitable for separating photocatalysts from solution for reuse. Adsorption-desorption analysis showed that the specific surface area of PFN was higher than that of FN. The UV-vis absorption spectra of FN and PFN nanocomposites exhibited strong absorption of visible light, attributed to the doping of Ni, which resulted in the reduction of the band-gap energy (Eg) of Fe3O4 to 2.4 eV. PFN nanocomposites with different mass ratios of PANI demonstrated superior photocatalytic activity compared to FN NPs. Furthermore, it was observed that PFN with a 10% mass ratio of PANI exhibited the highest RhB degradation efficiency, achieving a rate of approximately 98% after 300 min of irradiation. Finally, the possible photocatalytic degradation mechanisms of the PFN nanocomposites on RhB were discussed. PFN photocatalysts with good photocatalytic activity, inexpensive materials, and easy preparation could be potential candidates for wastewater purification applications.