Solubility Of Heavy Metals Research Articles

Enhancing the Phytoremediation of Heavy Metals by Plant Growth Promoting Rhizobacteria (PGPR) Consortium: A Narrative Review.

Heavy metal pollution has become a significant concern as the world continues to industrialize, urbanize, and modernize. Heavy metal pollutants impede the growth and metabolism of plants. The bioaccumulation of heavy metals in plants may create chlorophyll antagonism, oxidative stress, underdeveloped plant growth, and reduced photosynthetic system. Finding practical solutions to protect the environment and plants from the toxic effects of heavy metals is essential for long-term sustainable development. The direct use of suitable living plants for eliminating and degrading metal pollutants from ecosystems is known as phytoremediation. Phytoremediation is a novel and promising way to remove toxic heavy metals. Plant growth-promoting rhizobacteria (PGPR) can colonize plant roots and help promote their growth. Numerous variables, such as plant biomass yield, resistance to metal toxicity, and heavy metal solubility in the soil, affect the rate of phytoremediation. Phytoremediation using the PGPR consortium can speed up the process and increase the rate of heavy metal detoxification. The PGPR consortium has significantly increased the biological accumulation of various nutrients and heavy metals. This review sheds light on the mechanisms that allow plants to uptake and sequester toxic heavy metals to improve soil detoxification. The present review aids the understanding of eco-physiological mechanisms that drive plant-microbe interactions in the heavy metal-stressed environment.

An Overview of the Soil Acidity Causes in Ethiopia, Consequences, and Mitigation Strategies

Soil acidity is a serious land degradation problem and worldwide danger, impacting approximately 50% of the world's arable soils and limiting agricultural yield. Soil acidification is a complicated series of events that lead to the production of acidic soil. In its widest sense, it can be defined as the total of natural and human processes that reduce the pH of soil solutions. Soil acidity affects around 43% of agricultural land in Ethiopia's humid and sub humid highlands. The main objective of this seminar is to highlight different literatures on the concepts of soil acidity and to give a wealth of knowledge on the causes of soil acidity, the effects it has on agricultural production, and management strategies for reducing soil acidity and raising crop yield. Acid soils in western Ethiopia are mostly caused by topsoil erosion caused by heavy rains and high temperatures. This results in the loss of organic matter and the leaching of exchangeable basic cations (Ca<sup>2+</sup>, Mg<sup>2+</sup>, Na<sup>+</sup>, and K<sup>+</sup>). Because ammonium-based fertilizers are easily converted to nitrate and hydrogen ions in the soil, they play a significant role in acidification. One of the reasons of soil acidity is inefficient nitrogen usage, which is followed by alkalinity exports in crops. Soil acidity in Ethiopian highlands is mostly caused by the clearance of crop residues, continuous crop harvest without sufficient fertilization, cation removal, and usage of acid-forming inorganic fertilizers. Acid soil reduces nutrient availability and produces Al and Mn toxicity. In addition to these effects, soil acidity may rapidly degrade soil physicochemical qualities such as organic carbon (OC), cation exchange capacity (CEC), soil structure, porosity, and texture. Liming, the use of organic materials as ISFM, and the adoption of crop types that are resistant to Al toxicity are all alternatives for correcting acid soils. Liming can minimize toxicity by lowering concentrations, improving the availability of plant nutrients like P, Ca, Mg, and K in the soil, and reducing heavy metal solubility and leaching. Application of organic matter has a liming impact because of its abundance in alkaline cations (such Ca, Mg, and K) that were released from OM during mineralization. The pH of the soil is raised by soil organic matter, which helps with soil acidity supplements.

Positive Effect of Biochar Application on Soil Properties: Solubility and Speciation of Heavy Metals in Non-Acidic Contaminated Soils near a Steel Metallurgical Plant in Southeastern Europe

Neutral and slightly alkaline arable soils from the vicinity of the former and the biggest metallurgical plant in southeastern Europe were analyzed for the status of the water soluble pool of heavy metals in 1–20% w/w biochar (BC)-amended contaminated soils. Heavy metal solubility was monitored over a 6-month period. The metals (Fe, Mn, Cu, Zn, Cd, Pb and Ba) exhibited significant relationships between each other and exceeded the maximum permissible concentrations (MPC) in surface waters for domestic and drinking purposes. In most of the investigated sites and BC treatments, metal concentrations decreased with time due to the transfer to more resistant soil pools. Cation exchange capacity, exchangeable Ca and pH increased after BC application, while electrical conductivity decreased. BC amendment led to the prevalence of humic acids (HAs) over fulvic acids (FAs) and increased the fraction of refractory organic carbon. The share of metal–organic complexes increased for the metals Zn, Cd, Mn and Ba in the BC-amended soils, and the share of free Me2+ species decreased. This trend was especially pronounced in the soils with the lowest pH of 6.4–6.9. In addition to improving soil physicochemical and ecochemical properties, biochar application contributed to metal species in solutions that were less mobile and bioavailable.

Ecofriendly synthesized Zeolite 4A for the treatment of a multi-cationic contaminant-based effluent: Central composite design (CCD) statistical approach

One of the key aspects of futureproofing the sustainability of life on earth lies in the protection of the hydrosphere, particularly from soluble heavy metal ion pollutants. In the current study, the central composite design and optimization of the ion-exchange process have been carried out for the simultaneous removal of selected cations; Cd2+, Cu2+, and Zn2+ cations using synthesized zeolite 4A. X-ray diffraction analysis confirmed the formation of zeolite 4A. The Brunauer-Emmett-Teller (BET) surface area of the synthesized zeolite was 32 m2/g. Results mainly indicate that there is a strong relationship between the experimental data and central composite design-based models of ion removal efficiency with R2 > 0.9 and the lack of fit less than 0.1 %. All the selected ion exchange parameters (time, dosage, pH, and temperature) were found to be statistically significant, with a p-value less than 0.05.For the complete simultaneous removal of selected cations, the optimal zeolite dosage, pH, and contact time are 1.2 g/100 cm3, 6, and 3 h. The optimal temperature ranges from 25 to 27 °C. The initial concentration of each selected cation is 450 mg/L. The ion exchange is in good agreement with the Freundlich and Langmuir isotherm models. Based on the Langmuir isotherm model, the maximum Cd2+, Cu2+, and Zn2+ uptake capacity values of zeolite are 103, 99.89, and 82.08 mg/g, respectively. In this study, it has been mainly inferred that CCD can be considered a useful tool for the modeling and optimization of zeolite ion exchange applications.

Soil Acidity Causes in Ethiopia, Consequences and Mitigation Strategies-A Review

Soil acidity is a serious land degradation problem and worldwide danger, impacting approximately 50% of the world's arable soils and limiting agricultural yield. Soil acidification is a complicated series of events that lead to the production of acidic soil. In its widest sense, it can be defined as the total of natural and human processes that reduce the pH of soil solutions. Soil acidity affects around 43% of agricultural land in Ethiopia's humid and sub humid highlands. Acid soils in western Ethiopia are mostly caused by topsoil erosion caused by heavy rains and high temperatures. This results in the loss of organic matter and the leaching of exchangeable basic cations (Ca2+, Mg2+, Na+, and K+). Because ammonium-based fertilizers are easily converted to nitrate and hydrogen ions in the soil, they play a significant role in acidification. One of the reasons of soil acidity is inefficient nitrogen usage, which is followed by alkalinity exports in crops. Soil acidity in Ethiopian highlands is mostly caused by the clearance of crop residues, continuous crop harvest without sufficient fertilization, cation removal, and usage of acid-forming inorganic fertilizers. Acid soil reduces nutrient availability and produces Al and Mn toxicity. In addition to these effects, soil acidity may rapidly degrade soil physicochemical qualities such as organic carbon (OC), cation exchange capacity (CEC), soil structure, porosity, and texture. Liming, the use of organic materials as ISFM, and the adoption of crop types that are resistant to Al toxicity are all alternatives for correcting acid soils. Liming can minimize toxicity by lowering concentrations, improving the availability of plant nutrients like P, Ca, Mg, and K in the soil, and reducing heavy metal solubility and leaching. Application of organic matter has a liming impact because of its abundance in alkaline cations (such Ca, Mg, and K) that were released from OM during mineralization. The pH of the soil is raised by soil organic matter, which helps with soil acidity supplements.

Application of Membrane Separation Technology in Electroplating Wastewater Treatment and Resource Recovery: A Review

The rapid development of industry has led to the generation of a large amount of electroplating wastewater. The direct discharge of untreated electroplating wastewater may lead to the formation of toxic metal-organic complexes, which is a challenging problem for human health and the living environment of organisms. Due to the high solubility of heavy metals in aquatic environments and their easy absorption by organisms, effective treatment of electroplating wastewater is of great significance. The ultimate goal of electroplating wastewater treatment should be to recover metals and water from electroplating wastewater. In indoor experiments, pilot tests, and industrial applications of electroplating wastewater treatment, membrane treatment technology commonly used in wastewater terminal treatment has attracted great attention. Membrane treatment technology seems to be the most promising method for removing heavy metals and organic pollutants from electroplating wastewater. This article reviews the membrane treatment technologies for electroplating wastewater, introduces the advantages and disadvantages of various membranes in the treatment of electroplating wastewater, the removal efficiency of pollutant types, and their comparison. The focus is on the treatment effects of nano-filtration membrane, ultra-filtration membrane, micro-filtration membrane, reverse osmosis membrane, ceramic membrane, biofilm, etc., on electroplating wastewater. Compared with a single treatment method, the combination of different processes shows higher efficiency in removing various pollutants.

The coupling of sulfide and Fe-Mn mineral promotes the migration of lead and zinc in the redox cycle of high pH floodplain soils

In this study, we investigated the impact of fluctuating water levels on the distribution of lead (Pb) and zinc (Zn) in soil and sediments at a historical Pb-Zn smelting site along the Xiangjiang River. Despite the high pH levels (7 to 11) in the study area, which generally inhibits heavy metal solubility, we found that regular changes in water levels still affect Pb-Zn movement. Soil analysis revealed distinct redox zones within the unconfined aquifer, as shown by the variable Fe/Mn and Ce/Ce* ratios. Advanced techniques such as Mn K-edge XAFS, Mössbauer spectroscopy, and TOF-SIMS indicated persistent Fe-Mn redox cycling and highlighted the presence of Pb and Zn-rich manganese oxides near sulfur-bearing minerals. These findings suggest that acidic microzones produced by the oxidation of sulfur-bearing minerals become "refuges" for microbial and heavy metal activity. Considering that sulfur-containing minerals are widespread waste types in nonferrous metal smelting sites, these findings are instructive for a better understanding of the transformation mechanisms of heavy metal ions in nonferrous metal smelting-polluted environments and for guiding pollution remediation strategies.

Highly efficient Mn2+, Mg2+, and NH4+ recovery from electrolytic manganese residue via leaching, solvent extraction, coprecipitation, and atmospheric oxidation

Electrolytic manganese residue (EMR), a solid waste generated during electrolytic manganese production, exhibits substantial leaching toxicity owing to its elevated levels of soluble Mn2+ and NH4+. The leaching and recovery of valuable metal ions and NH4+ from EMR are key to the hazard-free treatment and resource utilization of EMR. In this study, two-stage countercurrent leaching with water was used to leach Mn2+, Mg2+, and NH4+ from EMR. Subsequently, two-stage countercurrent extraction was conducted using α-hydroxy-2-ethylhexyl phosphinic acid (α-H-2-EHA) as an extractant to enrich Mn2+, and Mg2+, and NH4+ were recovered via coprecipitation. Based on the calculations for a single leaching-extraction process, the recoveries of Mn2+, Mg2+, and NH4+ ions exceeded 80%, 99%, and 90%, respectively. In addition, high-purity Mn3O4 with an Mn content of 71.61% and struvite were produced. This process represents a win-win strategy that facilitates the hazard-free treatment of EMR while simultaneously recovering valuable Mn2+, Mg2+, and NH4+ resources from waste. Thus, this study provides a novel approach to the hazard-free and resourceful management of solid waste. Environmental implicationElectrolytic manganese residue (EMR), a solid waste generated during electrolytic manganese production, poses significant environmental risks due to its soluble heavy metals and ammonia nitrogen content. Efforts have been made to address this issue, but there has been no mature industrial application due to cost or processing capacity constraints. In this work, solvent extraction was first used to enrich Mn2+ from EMR leachate, and a novel α‑hydroxy‑2‑ethylhexyl phosphinic acid was used as extractant. High purity Mn3O4 and struvite was synthesized through this process. The win‑win strategy offers a novel approach for the hazard‑free and resourceful utilization of solid waste.

Immobilization Forms of Cadmium and Mercury in a Potassium-Activated Metakaolin-Based Geopolymer

Previous studies of cadmium and mercury immobilization in geopolymers have produced inconsistent results due to their different pozzolans, metal concentrations, and mixing procedures. Understanding the effects of these parameters on heavy metal immobilization is key to predicting their long-term stability. In this study, cadmium and mercury were incorporated into a metakaolin-based K-activated geopolymer by three mixing procedures and concentrations of 0.02–1.00 wt.%. The samples were then immersed in water for 90 d to determine their stability. The results show that mercury is readily leached from the geopolymer, but cadmium is retained. Adding the heavy metals in salt form converts the metals into cadmium hydroxide and mercury oxide that reside at the bottom of the geopolymer. Mixing the salts with water forms soluble heavy metals prior to geopolymerization. This procedure produces more-homogeneous geopolymers. Cadmium is associated with silicate and aluminate, giving a better stability, whereas mercury forms mercury oxide. Different cadmium and mercury concentrations do not change the metal speciation as mercury is affected by relativistic contribution.

The effects and solidification characteristics of municipal solid waste incineration fly ash-slag-tailing based backfill blocks in underground mine condition

Currently, there is a limited understanding of the material performance effects and hydration mechanisms of solidified waste-based binder filling materials containing municipal solid waste incineration fly ash in the actual underground filling environment. This study utilized the Circulating Fluidized Bed (CFB) and Grate Furnace (GF) techniques to produce quadri-component uncalcined binder fill materials from municipal solid waste incineration fly ash (MSWI FA), blast furnace slag (BFS), flue gas desulfurization (FGD) gypsum, and tailings. The solidified test blocks were then cured in-situ in a void space of a certain iron underground mine in Hebei with conditions (temperature: 25-30℃, humidity: 18-19%, mine water influx: annual average of 150m3/h). The research results indicate that the mechanical performance and heavy metal solidification outcomes of these blocks surpassed those samples cured under laboratory conditions (temperature: (20±1)℃, humidity: not less than 90%), demonstrating the feasibility of using MSWI FA for underground binding and backfilling in mines. Building upon preliminary research, a binder mix proportion was established: 20wt.% MSWI FA, 70wt.% BFS, and 10wt.% FGD gypsum. Test blocks were fabricated using lead-zinc tailings sand and iron mine tailings as aggregates. All blocks met the 28-day strength requirements for typical mine backfills ranging from 1 to 6.5MPa, with the strength of the XB-M group reaching 24MPa (when cured underground). The leaching concentrations of heavy metals were all below the limits set for class III groundwater standards, with Pb, Zn, Cr, and As achieving a solidification rate of over 98% at 28 days. Microscopic hydration mechanisms indicate that the primary hydration products in the solidified body were ettringite, Friedel's salt, and C-S-H gel. The high content of reactive Al2O3 in the CFB fly ash enables the [AlO4]5- to substitute [SiO4]4-, leading to the formation of a long-chain, high polymerization C-A-S-H phase. Additionally, the abundant Cl- in GF fly ash readily reacted with [Al(OH)6]3−, forming Friedel's salt. The hydration products in the blocks cured under mine conditions significantly increased in their degree of polymerization. This provides a practical application approach for the future treatment and reuse of MSWI FA. Environmental implicationMSWI FA is classified as hazardous waste (HW18) due to its content of harmful components such as chlorides, dioxins, and soluble heavy metals, which pose potential environmental pollution risks. This study, for the first time, solidified test specimens were sent to an underground mining void in a certain iron mine in Hebei, China, for on-site curing (temperature range: 25-30°C, humidity: 18-19%, annual average mine water inflow rate: 150m3/h). The mechanical properties and the solidification performance of heavy metals in the test specimens were superior to those under laboratory curing conditions (temperature: (20±1)°C, humidity not less than 90%).

Enhanced fertilizer utilization and heavy metals immobilization by ball-milling bentonite with NH4Cl: Experiments and DFT calculations

Over-application of nitrogen fertilizer induces soil acidification, which activates heavy metals availability and poses significant challenge to crop production and food safety. In this study, we prepared a clay-based material by ball-milling bentonite with NH4Cl (NH4Cl@bentonite) and assessed its synergistic performance in enhancing nitrogen fertilizer utilization efficiency, immobilizing heavy metals, and improving crop yield and safety. The results showed that the optimal performance of NH4Cl@bentonite was achieved by milling bentonite with NH4Cl at a 4:1 mass ratio for 9 h. NH4Cl@bentonite significantly improved soil water holding and retention capacity by 1.6 and 4.3 times, respectively. In comparison to NH4Cl alone, NH4Cl@bentonite led to a 22.3% increase in N-use efficiency and a 1.5 times enhancement in crop yield. The Pb and Cd content in water spinach shoots decreased by 55.3% and 57.5%, respectively, attributed to the transformation of heavy metals into lower bioavailability states by NH4Cl@bentonite. Experiments and Density Functional Theory (DFT) calculations indicated that NH4Cl@bentonite could immobilize Pb and Cd through processes such as cation exchange, surface adsorption, complexation, and enhancement of soil pH. This work proposes a simple and efficient method for improving cropland fertilizer utilization while ensuring healthy and sustainable development. Environmental implicationSoil acidification, caused using chemical fertilizers, especially nitrogen-based ones, threatens crop production and food safety by damaging soil structure, speeding up nutrient loss, and increasing the solubility of heavy metals. To tackle this problem, we made a clay material by mixing bentonite with NH4Cl (NH4Cl@bentonite) in a ball mill. NH4Cl@bentonite increased N-use efficiency by 22.3%, boosted crop yield by 1.5 times, and reduced the Pb and Cd levels in water spinach shoots by 55.3% and 57.5%, respectively. This work suggests a simple and effective way to enhance fertilizer use in croplands while ensuring healthy and sustainable development.

Effect of biochar on heavy metal solubility and speciation in Technogenic soils around Aurubis copper smelter in Bulgaria

Effect of biochar on heavy metal solubility and speciation in Technogenic soils around Aurubis copper smelter in Bulgaria

The potential use of Pseudomonas in terrestrial and space agriculture.

In the last few years, there has been an increasing interest in solutions for sustainable agriculture to reduce negative impacts on the environment resulting from modern agricultural practices. The use of environmentally beneficial bacteria, like Pseudomonas, which can increase plant productivity by reducing growth time, is a promising opportunity for sustainable agriculture. Pseudomonas is a gram-negative bacterium genus, commonly present in soils, plants, and irrigation water. Pseudomonas has a wide range of metabolic routes that could benefit agriculture, such as nutrient uptake, pathogen suppression, heavy metal solubilization, drought tolerance, and high salt concentration tolerance. Pseudomonas may even be proposed as a potential tool for future agriculture on other planets, where the use of microorganisms would be essential for crop development in hostile and inhospitable environments. Hence, the present review discusses the potential use of Pseudomonas in sustainable agriculture on planet Earth and potentially on Mars, highlighting its role in plant growth enhancement and plant protection from pathogenic microorganisms.

Assessment of the content of heavy metals in the snow cover and hair in children

Introduction. Environmental pollution leads to the need for regular monitoring and analysis of the content of toxic elements in the components of the environment and biosubstrates of the population to determine the degree of contamination of the territory, their accumulation in the body and assess the risk of health disorders.
 Materials and methods. Samples of snow cover were taken from eleven different sections of functional zones, and 52 hair samples were examined in two groups of children in different schools of the city. Determination of the content of water–soluble heavy metals and arsenic (HMAr) was carried out by atomic absorption method on the AAC-240 DUO “Agilent Technolgies” device.
 Results. In the snow cover of individual functional zones of Svirsk, a significant excess of Cu, Zn, Mn, Cd, Pb, and As content was found in comparison with background values in the range of 2–11 times. Indicator elements (Mn, Cr, Zn, Cd, As) reflecting the specifics of increased accumulation of HMAr in the hair of children in different areas of the city were identified. Strong correlations (r = 0.78–0.83) were established between the content of HMAr in the snow cover near schools and in the hair in the examined groups of children.
 Limitations. The assessment of content of HMs in the snow cover and in the hair in children population was evaluated without determining the accumulation of elements in the soil and migration to plant cultures.
 Conclusion. The revealed high levels of accumulation of HMAr in the snow cover and hair in children in Svirsk, due to the significant anthropogenic impact of emissions from industrial enterprises, motor vehicles, and residential households, indicate the tension of the environmental situation in the city and the need to implement a set of measures to improve it.

Mesophilic, thermophilic and thermal hydrolysis process coupled anaerobic digestion of sewage sludge: Biomethane potential, pathogen removal and energy feasibility

Conventional Anaerobic digestion is one of the most preferred sludge management techniques however, it has limitations such as low hydrolysis rate, longer retention time, larger digester volume, and reduced methane generation etc., To overcome these problems, Thermal hydrolysis process (THP) has been used as an effective pretreatment method for enhancing methane generation. However, the effect of the thermal hydrolysis process in heavy metal solubilization and methane production from high SRT (solids retention time) sludge is still not clear. Anaerobic digestion of sewage sludge sourced from sequencing batch reactor (SBR) and conventional activated sludge process (CASP) systems were evaluated under mesophilic (MAD), thermophilic (TAD), and thermal hydrolysis process (THP) mediated anaerobic digestion (AD) in terms of methane generation and, VS and pathogen removal. THP resulted in almost 38% COD solubilization for SBR and CASP sludge. Anaerobic digestion of SBR sludge resulted in methane generation of 101, 166, and 390 mL/gVS under mesophilic, thermophilic, and THP pretreatment conditions, respectively. For CASP sludge, the highest methane generation was observed for THP pretreated sludge (587 mL/gVS), followed by thermophilic (298 mL/gVS) and mesophilic digestion (241 mL/gVS). The fecal coliforms in the mesophilic and thermophilic digested SBR sludge were 3000 and 620 MPN/g, respectively, while 6100 and 740 MPN/g were found in digested CASP sludge, respectively. The THP-MAD and TAD processed SBR, and CASP sludges met the Class A sludge fecal coliforms and Salmonella density criteria of <1000 MPN/g TS (dry basis) and 3 MPN/4g TS (dry basis), respectively, over MAD processed sludges. Even though THP pretreatment resulted in the release of heavy metals, the concentration of heavy metals in the THP effluent was lesser than the limits prescribed by USEPA. The energy demand of the THP unit (160 °C, 6 bar) was estimated to be 162 MJ/m3. The energy balance analysis revealed that THP pretreatment would lead to energy self-sufficiency upon integration in a wastewater treatment plant (WWTP). This study can provide an experimental basis to apply THP pretreatment to enhance hydrolysis rate in anaerobic digesters while maximizing methane production and achieving energy benefits over MAD and TAD.

Phytoremediation Effect and Soil Microbial Community Characteristics of Jiulong Iron Tailings Area, Jiangxi

The aim of this paper was to explore the remediation effect and mechanism of Wetland pine (Pinus elliottii), Chinese fir (Cunninghamia lanceolata (Lamb.) Hook), and Alder (Alnus cremastogyne Burkill) on heavy metal contaminated soil in the iron tailings of Jiulong Iron Tailings Area. At the same time, the specificity of plant rhizosphere and non-rhizosphere soil microbial community structure and ecological function were analyzed based on macrogenomic sequencing. The results showed that the dominant microbial genera in J1 (control) was Acidobacteria, followed by Proteobacteria and Actinobacteria. The microbial genera with the highest percentage of relative abundance in J2, J3, J4, J5, and J6 (J2, Wetland Pine rhizosphere; J3, Wetland Pine non-rhizosphere; J4, Chinese fir rhizosphere; J5, Alder rhizosphere; J6, Alder non-rhizosphere) were Proteobacteria, followed by Acidobacteria, and Actinobacteria. It was found that Proteobacteria promoted heavy metal solubilization, activated heavy metals, and converted their forms to improve plant uptake of heavy metals. This proves that the microorganisms of Proteobacteria are the key microbial genera in the study of regional heavy metal remediation. The antibiotic resistance genes (ARGs) in microorganisms can respond to the inducement of heavy metals. Here, we investigated the relationship between the abundance of soil microorganisms ARGs and heavy metal pollution in Jiulong Iron Tailings Area. There are significant differences in the quantity and category of ARGs in the rhizosphere and non-rhizosphere soil samples of the three tree species. The results of this study provide the foundation for the theory and practice of remediation of heavy metal contamination in soils of iron tailing areas in Jiulong Iron Tailings Area in similar stand conditions.

SPATIAL DISTRIBUTION OF HEAVY METALS IN SOILS AND WATERS AS EXEMPLIFIED BY KAKHETI REGION (EASTERN GEORGIA)

The subject of research is the chemical analysis of heavy metals and assessment of their impact on soil and water, which is caused by solid waste. The closed landfill of Gurjaani in Eastern Georgia, was selected for the study, where various wastes are accumulated, including agricultural pesticides, herbicides and other wastes and their containers. In order to identify the contaminated areas in the field, soil samples were taken. The samples were processed accordingly in the research laboratory and various elements (pH, Pb, Cu, Zn, Cd) and organic substances were determined in them. As a result of the laboratory research, the facts of metal concentration were clearly identified. Zinc turned out to be especially dominant. It is a fact that the waste of various composition unsystematically located at the landfill is the cause of these metals entering the environment. However, the type and quality of pollution depend on several factors: the amount of waste, morphological composition, climatic conditions, physical-chemical properties of the soil, etc. It was determined that Soil type, in this case brown soils, site reaction and climate contribute to the accumulation and subsequent solubility of heavy metals. Through surface and ground water, even remote areas are put at ecological risk.

English

Heavy metal cycles in horticultural systems in areas supplying vegetables to Mbare Musika were characterized with reference to the soil, water, fertilizers used and crops grown from different ecological zones of Zimbabwe. Apart from inherent soil heavy metal properties, anthropogenic sources contributed through irrigation water and fertilizers. Different areas specialized in growing peculiar vegetables through influence of environmental traits within the horticultural system. The soil in Mutoko, Rusape and Seke had high levels of cadmium and lead unlike in other study areas. The water was a major source of cadmium, cobalt and lead. Most soils within the study area had an acidic pH noted to promote heavy metals solubility hence makes vegetables contamination inevitable. Irrigation water is the challenge in most of the study areas. Generally, soil pH, irrigation water quality and fertilizers need to be regulated together with other soil amendment programs to break the cycle of heavy metals in the horticultural systems. Key words:&nbsp; Heavy metal, pH, cadmium, lead, maximum threshold, route, Mbare&nbsp; Musika, horticultural system.

Preliminary Design and Study of a Small Modular Chlorine Salt Fast Reactor Cooled by Supercritical Carbon Dioxide

Small modular reactors with power below 300 MW have the advantages of small specific mass, long lifetime, and flexible power supply, and they are suitable for providing power support for small and medium-sized towns with small populations and remote areas without grid coverage. In this paper, a small modular S-CO2-cooled molten salt reactor is proposed, and the design of a 10 MW small modular chlorine salt fast reactor (sm-MCFR) with 20 years of operation without refueling is presented. The neutron feasibility of the S-CO2-cooled small modular chlorine fast reactor is analyzed in terms of neutron energy spectrum, reactivity control, temperature reactivity coefficient, and power distribution. A distinctive feature of the sm-MCFR is the use of chlorine salts with high heavy metal solubility and a hard energy spectrum, allowing the core size to be minimized while maintaining the maximum lifetime. The designed core is about 2.44 m in diameter and 2.24 m in height. Meanwhile, the sm-MCFR uses control drum control as the control system, which can effectively achieve reactivity control without increasing the reactor size. The final optimized sm-MCFR has a negative temperature reactivity coefficient, which is necessary to ensure the safe operation of the reactor.

Investigation of heavy metal and micro-macro element speciation in biomass ash enriched sewage sludge compost

The objective of this study was to enrich the nutrient content of compost and to investigate the passivation and solubilization of plant micronutrients (Fe, Al, Cu, Ni, Zn, Na, Mn), macroelements (P, K, Mg, Ca), and heavy metals (Cr, Cd, Pb) during sewage sludge composting with nutrient-rich biomass ash additives. T0: 0%, T1: 3.5%, T2: 7.0%, and T3: 14.0% dry weight (DW), weight/weight (w/w) biomass ash was added to the sewage sludge + sawdust mixture (volume, 1:1) to obtain the final NPK content and monitored over a 45-day period. Sawdust was used as auxiliary material. The sequential extraction method was used to determine the elemental species. Cr, Cd and Pb showed higher affinity to the residual fraction and occluded in the oxide fraction, which decreased the bioavailability factor (BF) (<1% BF–Cr, 21% BF–Cd and 9% BF–Pb) compared to the control treatment (46% BF–Cr, 47% BF–Cd and 80% BF–Pb). As the amount of biomass ash increased (T1-T3), the percentages of residual Cr (Res-Cr) (10–65%), exchangeable Cd (Exc-Cd) and organically bound Cd (Org-Cd) (14% and 21%), and oxides-Pb (Oxi-Pb) (20–61%) increased. In all composts, Fe, Al, and Cu were associated with organically bound and oxides-entrapped fractions. More than 50% of total Mn and Mg were concentrated mainly in exchangeable fractions, suggesting high mobility and bioavailability (42% BF–Mn and 98% BF–Mg). Ni, Zn, and Na tended to be present in oxide-bound, organically bound, and residual fractions, while K and P were associated with exchangeable and organically bound fractions. The overall results suggest that composting sewage sludge with biomass ash may be the best strategy and technique to overcome soil application bottlenecks because it passivates heavy metals and improves the bioavailability of plant nutrients.