Solid-state Nuclear Magnetic Resonance Studies Research Articles

Improved solid-state 13C and 15N NMR reveals fundamental compositional divide between refractory dissolved organic carbon and nitrogen in the sea

Marine dissolved organic matter (DOM) is one of the largest reservoirs of organic carbon and nitrogen reservoirs in the world. Yet, despite its global importance, most DOM remains molecularly uncharacterized. Solid-state nuclear magnetic resonance (NMR) spectroscopy of isolated DOM fractions represents one of the most powerful techniques to understand overall structural composition. However, it is well known that standard cross polarization magic angle spinning (CP/MAS) NMR, the technique used for almost all past solid-state NMR studies of DOM, is at best “semi-quantitative,” and underestimates fully substituted NMR active nuclei. Additionally, almost all past solid-state NMR work analyzed high molecular weight (HMW) material isolated by ultrafiltration, which is now understood to represent mostly 14C-young, “semi-labile” compounds. In contrast, there is far less information regarding the composition of older, low molecular weight (LMW) DOM, which represents the vast majority of the ocean’s accumulated refractory DOM pool.Here, we applied 13C and 15N solid-state multiCP/MAS NMR, improved NMR methods optimized to more quantitatively resolve fully substituted NMR nuclei, to both HMW and LMW DOM isolated from the surface and deep North Pacific Subtropical Gyre. These methods confirm past work indicating most nitrogen containing HMW DOM as amide compounds, but also demonstrate a modest heterocyclic N component not previously identified. In contrast, we found that LMW DON is almost entirely aromatic heterocyclic N, consistent with the hypothesis that heterocyclic N structures may be largely responsible for the accumulation of the ocean’s refractory DON pool. Surprisingly, however, we find DOC aromatic functionalities still represent only a very minor portion of either the HMW or the LMW refractory carbon pools, in marked contrast to refractory DON composition. Together, these more quantitative solid-state NMR techniques likely represent the most accurate picture of DON and DOC functional and compound-class makeup to date, and so have broad implications for our understanding of marine DOM structure and cycling. Specifically, our new data suggests that while chemical composition likely acts as a key control on DOM lability, the most refractory components of DOC and DON have very different compositions, sources, and cycling, supporting the idea that DOC and DON cycling in the ocean may be largely decoupled.

Defects tune the acidic strength of amorphous aluminosilicates

Crystalline zeolites have high acidity but limited utility due to microporosity, whereas mesoporous amorphous aluminosilicates offer better porosity but lack sufficient acidity. In this work, we investigated defect engineering to fine-tune the acidity of amorphous acidic aluminosilicates (AAS). Here we introduced oxygen vacancies in AAS to synthesize defective acidic aluminosilicates (D-AAS). 1H, 27Al, and 17O solid-state nuclear magnetic resonance (NMR) studies indicated that defects induced localized structural changes around the acidic sites, thereby modifying their acidity. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy studies substantiated that oxygen vacancies alter the chemical environment of Brønsted acidic sites of AAS. The effect of defect creation in AAS on its acidity and catalytic behavior was demonstrated using four different acid-catalyzed reactions namely, styrene oxide ring opening, vesidryl synthesis, Friedel-Crafts alkylation, and jasminaldehyde synthesis. The defects played a role in activating reactants during AAS-catalyzed reactions, enhancing the overall catalytic process. This was supported by in-situ FTIR, which provided insights into the molecular-level reaction mechanism and the role of defects in reactant activation. This study demonstrates defect engineering as a promising approach to fine-tune acidity in amorphous aluminosilicates, bridging the porosity and acidity gaps between mesoporous amorphous aluminosilicates and crystalline zeolites.

Can Subsurface Oxygen Species in Oxides Participate in Catalytic Reactions? An 17O Solid-State Nuclear Magnetic Resonance Study.

The impacts of subsurface species of catalysts on reaction processes are still under debate, largely due to a lack of characterization methods for distinguishing these species from the surface species and the bulk. By using 17O solid-state nuclear magnetic resonance (NMR) spectroscopy, which can distinguish subsurface oxygen ions in CeO2 (111) nanorods, we explore the effects of subsurface species of oxides in CO oxidation reactions. The intensities of the 17O NMR signals due to surface and subsurface oxygen ions decrease after the introduction of CO into CeO2 nanorods, with a more significant decrease observed for the latter, confirming the participation of subsurface oxygen species. Density functional theory calculations show that the reaction involves subsurface oxygen ions filling the surface oxygen vacancies created by the direct contact of surface oxygen with CO. This new approach can be extended to the study of the role of oxygen species in other catalytic reactions.

Exploring the influence of hydrogen bond donor groups on the microstructure and intermolecular interactions of amorphous solid dispersions containing diflunisal structural analogues

Drug-polymer intermolecular interactions, and H-bonds specifically, play an important role in the stabilization process of a compound in an amorphous solid dispersion (ASD). However, it is still difficult to predict whether or not interactions will form and what the strength of those interactions would be, based on the structure of drug and polymer. Therefore, in this study, structural analogues of diflunisal (DIF) were synthesized and incorporated in ASDs with poly(vinylpyrrolidone-co-vinyl acetate) (PVPVA) as a stabilizing polymer. The respective DIF derivatives contained different types and numbers of H-bond donor groups, which allowed to assess the influence of these structural differences on the phase behavior and the actual interactions formed in the ASDs. The highest possible drug loading of these derivatives in PVPVA were evaluated through film casting. Subsequently, a lower drug loading of each compound was spray dried. These spray dried ASDs were subjected to an in-depth solid-state nuclear magnetic resonance (ssNMR) study, including 1D spectroscopy and relaxometry, as well as 2D dipolar HETCOR experiments. The drug loading study revealed the highest possible loading of 50 wt% for the native DIF in PVPVA. The methoxy DIF derivative reached the second highest drug loading of 35 wt%, while methylation of the carboxyl group of DIF led to a sharp decrease in the maximum loading, to around 10 wt% only. Unexpectedly, the maximum loading increased again when both the COOH and OH groups of diflunisal were methylated in the dimethyl DIF derivative, to around 30 wt%. The ssNMR study on the spray dried ASD samples confirmed intermolecular H-bonding with PVPVA for native DIF and methoxy DIF. Studies of the proton relaxation decay times and 2D 1H–13C dipolar HETCOR experiments indicated that the ASDs with native DIF and methoxy DIF were homogenously mixed, while the ASDs containing DIF methyl ester and dimethyl DIF were phase separated at the nm level. It was established that, for these systems, the availability of the carboxyl group was imperative in the formation of intermolecular H-bonds with PVPVA and in the generation of homogenously mixed ASDs.

Solid-state NMR MAS CryoProbe enables structural studies of human blood protein vitronectin bound to hydroxyapatite

The low sensitivity of nuclear magnetic resonance (NMR) is a major bottleneck for studying biomolecular structures of complex biomolecular assemblies. Cryogenically cooled probe technology overcomes the sensitivity limitations enabling NMR applications to challenging biomolecular systems. Here we describe solid-state NMR studies of the human blood protein vitronectin (Vn) bound to hydroxyapatite (HAP), the mineralized form of calcium phosphate, using a CryoProbe designed for magic angle spinning (MAS) experiments. Vn is a major blood protein that regulates many different physiological and pathological processes. The high sensitivity of the CryoProbe enabled us to acquire three-dimensional solid-state NMR spectra for sequential assignment and characterization of site-specific water-protein interactions that provide initial insights into the organization of the Vn-HAP complex. Vn associates with HAP in various pathological settings, including macular degeneration eyes and Alzheimer's disease brains. The ability to probe these assemblies at atomic detail paves the way for understanding their formation.

Embedding plasmonic nanoparticles in soft crystals: an approach exploiting CTAB-I structures.

Embedding nanoparticles with different functionalities into soft substrates is a convenient tool to realize technologically significant multifunctional materials. This study focuses on incorporating bimetallic plasmonic nanoparticles into soft crystals made of cetyltrimethylammonium bromide-iodide. We observed the emergence of a novel symmetry-lowered cetrimonium crystal polymorph that enables the realization of strong interparticle plasmonic coupling in these composite materials. The observed crystal polymorph exhibits a triclinic structure with significantly reduced unit cell volume compared to standard CTAB. Solid-state nuclear magnetic resonance studies revealed an enhanced cetrimonium chain rigidity and a commensurate decrease in the mobility of the methyl groups. This is attributed to iodide incorporation. To study the influence of these interactions on solution phase dynamical properties, we employed light scattering measurements using gold nanospheres as markers, where we observed aggregation of these particles. We then develop a two step synthetic scheme that successfully enables high levels (533 particles per μm2) of incorporation of bimetallic plasmonic particles into the emergent crystal polymorph.

Ionic salt cocrystals studied via multinuclear solid-state magnetic resonance: a case study of lithium 4-methoxybenzoate:L-proline polymorphs

Lithium salts continue to find pharmaceutical applications, particularly as psychiatric medications. As with any active pharmaceutical ingredient, structural polymorphism is an important concern for lithium-based medications that can influence solubility and other physicochemical properties. Here we report a 13C, 1H, and 7Li magic-angle spinning solid-state nuclear magnetic resonance (MAS SSNMR) study of two 1:1 polymorphic ionic cocrystals of lithium 4-methoxybenzoate and L-proline (L4MPRO(α) and L4MPRO(β)). One-dimensional 13C cross-polarization MAS and two-dimensional heteronuclear correlation NMR spectra hint at differential mobilities of the proline and benzoate moieties for the two polymorphs. Five key resonances differ in 13C chemical shift by more than 1 ppm between the two polymorphs, clearly distinguishing between them. Gauge-including projector-augmented-wave density functional theory calculations of 13C and 1H magnetic shielding constants correlate strongly with the experimental chemical shifts for both polymorphs. R2 and root-mean-square deviation metrics are shown to be insufficient in the case of 13C, but sufficient in the case of 1H, for differentiating between the polymorphs. 7Li satellite-transition MAS NMR of both polymorphs are identical, as are the computed lithium magnetic shielding constants, demonstrating the insensitivity of 7Li NMR to polymorphism in these samples. This work highlights the utility of solid-state NMR spectroscopy for examining ionic salt cocrystals and also highlights some caveats in this regard.

Combining Atomic Layer Deposition with Surface Organometallic Chemistry to Enhance Atomic-Scale Interactions and Improve the Activity and Selectivity of Cu-Zn/SiO2 Catalysts for the Hydrogenation of CO2 to Methanol.

The direct synthesis of methanol via the hydrogenation of CO2, if performed efficiently and selectively, is potentially a powerful technology for CO2 mitigation. Here, we develop an active and selective Cu-Zn/SiO2 catalyst for the hydrogenation of CO2 by introducing copper and zinc onto dehydroxylated silica via surface organometallic chemistry and atomic layer deposition, respectively. At 230 °C and 25 bar, the optimized catalyst shows an intrinsic methanol formation rate of 4.3 g h-1 gCu-1 and selectivity to methanol of 83%, with a space-time yield of 0.073 g h-1 gcat-1 at a contact time of 0.06 s g mL-1. X-ray absorption spectroscopy at the Cu and Zn K-edges and X-ray photoelectron spectroscopy studies reveal that the CuZn alloy displays reactive metal support interactions; that is, it is stable under H2 atmosphere and unstable under conditions of CO2 hydrogenation, indicating that the dealloyed structure contains the sites promoting methanol synthesis. While solid-state nuclear magnetic resonance studies identify methoxy species as the main stable surface adsorbate, transient operando diffuse reflectance infrared Fourier transform spectroscopy indicates that μ-HCOO*(ZnOx) species that form on the Cu-Zn/SiO2 catalyst are hydrogenated to methanol faster than the μ-HCOO*(Cu) species that are found in the Zn-free Cu/SiO2 catalyst, supporting the role of Zn in providing a higher activity in the Cu-Zn system.

The Double-Layered Structure of Amyloid-β Assemblage on GM1-Containing Membranes Catalytically Promotes Fibrillization.

Alzheimer's disease (AD) is associated with progressive accumulation of amyloid-β (Aβ) cross-β fibrils in the brain. Aβ species tightly associated with GM1 ganglioside, a glycosphingolipid abundant in neuronal membranes, promote amyloid fibril formation; therefore, they could be attractive clinical targets. However, the active conformational state of Aβ in GM1-containing lipid membranes is still unknown. The present solid-state nuclear magnetic resonance study revealed a nonfibrillar Aβ assemblage characterized by a double-layered antiparallel β-structure specifically formed on GM1 ganglioside clusters. Our data show that this unique assemblage was not transformed into fibrils on GM1-containing membranes but could promote conversion of monomeric Aβ into fibrils, suggesting that a solvent-exposed hydrophobic layer provides a catalytic surface evoking Aβ fibril formation. Our findings offer structural clues for designing drugs targeting catalytically active Aβ conformational species for the development of anti-AD therapeutics.

A combined solid-state NMR and quantum chemical calculation study of hydrogen bonding in two forms of α-d-glucose

Hydrogen bonding plays an important role in the structure and function of a wide range of materials. Solid-state 1H nuclear magnetic resonance (NMR) spectroscopy provides a very sensitive tool to investigate the local structure of hydrogen atoms involved in hydrogen bonding. While there is extensive 1H solid-state NMR data on O–H - - O hydrogen bonding in solid carboxylic acids, there has been no systematic 1H solid-state NMR studies of hydroxyl groups in carbohydrates (and hydroxyl groups in general). With a view to studying the hydrogen bonding in more complex materials such as cellulose polymorphs, we carried out a detailed solid-state 1H NMR investigation of the model compounds α-d-glucose and α-d-glucose monohydrate. Through a combination of fast magic-angle spinning (MAS), combined rotation and multiple pulse spectroscopy (CRAMPS), and two-dimensional (2D) correlation experiments carried out at ultrahigh magnetic fields, it was possible to assign all of the aliphatic (CH), hydroxyl (OH), and water (H2O) 1H chemical shifts in both forms of α-d-glucose. Plane-wave DFT calculations were employed to improve the hydrogen atom positions for α-d-glucose monohydrate and to calculate 1H chemical shifts, providing additional support for the experimentally determined peak assignments. Finally, the relationship between the hydroxyl 1H chemical shifts and their hydrogen bonding geometry was investigated and compared to the well-established relationship for carboxylic acid protons.

Investigating Transport through Separator Membranes in Aqueous Organic Redox Flow Batteries Using NMR Spectroscopy

Electricity and heat generation contribute 25% of greenhouse gas emissions globally.1 Redox flow batteries (RFBs) are prospective devices for long-duration energy storage, which is required to integrate more renewable energy sources onto the electricity grid.2 RFBs have a modular design with decoupled power and energy ratings, allowing them to be scaled to suit grid-level energy storage requirements. The development of aqueous organic redox flow batteries (AORFBs), such as quinone-based systems, is gaining momentum because they are potentially cheaper, safer and more sustainable than vanadium-based RFBs.3-5 However, the crossover of redox-active species through the separator membrane can lead to irreversible capacity fade, limiting their lifetime and economic viability.6 It has previously been demonstrated that in situ spectroscopic techniques are powerful tools for determining reaction mechanisms in redox flow batteries.5,7 Here, we explore how solution-state in situ nuclear magnetic resonance (NMR) spectroscopy and solid-state NMR spectroscopy can be used to study the crossover of electrolytes in AORFBs. We demonstrate that in situ solution NMR spectroscopy can be used to characterise transport in operating AORFBs with high temporal resolution and minimal system disturbance. This method can therefore be applied to investigate how crossover is governed by structure-property relationships and the charging protocols used. Furthermore, polymer-electrolyte interactions within the membrane can be probed using complementary solid-state NMR studies. Together, these fundamental studies will ultimately advance our understanding of electrolyte crossover, so that improved separator membranes can be developed.

From the Light Chain Sequence to the Tissue Microenvironment: Contribution of the Mesangial Cells to Glomerular Amyloidosis

Studies carried out in the last three decades have significantly advanced our knowledge about the structural factors that drive the amyloid aggregation of the immunoglobulin light chains. Solid-state nuclear magnetic resonance and cryo-electron microscopy studies have resulted in huge progress in our knowledge about the AL fibril structure. Now, it is known that the assembly of the light chain into AL fibrils implies an extensive conformational rearrangement that converts the beta-sandwich fold of the protein into a near flat structure. On the other hand, there has also been significant progress made in understanding the role that some cell types play as facilitators of AL formation. Such a role has been studied in glomerular amyloidosis, where mesangial cells play an important role in the mechanism of AL deposition, as well as for the pathogenic mechanisms that result in glomerular/renal damage. This review addresses what we currently know about why and how certain light chains are prone to forming amyloid. It also summarizes the most recent publications on the structure of AL fibrils and analyzes the structural bases of this type of aggregate, including the origin of its structural diversity. Finally, the most relevant findings on the role of mesangial cells in the amyloid deposition of light chains in the glomerular space are summarized.

Solid-state NMR analysis of unlabeled fungal cell walls from Aspergillus and Candida species

Fungal infections cause high mortality in immunocompromised individuals, which has emerged as a significant threat to human health. The efforts devoted to the development of antifungal agents targeting the cell wall polysaccharides have been hindered by our incomplete picture of the assembly and remodeling of fungal cell walls. High-resolution solid-state nuclear magnetic resonance (ss NMR) studies have substantially revised our understanding of the polymorphic structure of polysaccharides and the nanoscale organization of cell walls in Aspergillus fumigatus and multiple other fungi. However, this approach requires 13C/15N-enrichment of the sample being studied, severely restricting its application. Here we employ the dynamic nuclear polarization (DNP) technique to compare the unlabeled cell wall materials of A. fumigatus and C. albicans prepared using both liquid and solid media. For each fungus, we have identified a highly conserved carbohydrate core for the cell walls of conidia and mycelia, and from liquid and solid cultures. Using samples prepared in different media, the recently identified function of α-glucan, which packs with chitin to form the mechanical centers, has been confirmed through conventional ss NMR measurements of polymer dynamics. These timely efforts not only validate the structural principles recently discovered for A. fumigatus cell walls in different morphological stages, but also open up the possibility of extending the current investigation to other fungal materials and cellular systems that are challenging to label.

Growth-phase dependence of bacterial membrane lipid profile and labeling for in-cell solid-state NMR applications

Cell labeling is a preliminary step in multiple biophysical approaches, including the solid-state nuclear magnetic resonance (NMR) study of bacteria in vivo. Deuterium solid-state NMR has been used in the past years to probe bacterial membranes and their interactions with antimicrobial peptides, following a standard labeling protocol. Recent results from our laboratory on a slow-growing bacterium has shown the need to optimize this protocol, especially the bacterial growth time before harvest and the concentration of exogenous labeled fatty acids to be used for both Escherichia coli and Bacillus subtilis. It is also essential for the protocol to remain harmless to cells while providing optimal labeling. We have therefore developed a fast and facile approach to monitor the lipid composition of bacterial membranes under various growth conditions, combining solution 31P NMR and GCMS. Using this approach, the optimized labeling conditions of Escherichia coli and Bacillus subtilis with deuterated palmitic acid were determined. Our results show a modification of B. subtilis phospholipid profile as a function of the growth stage, as opposed to E. coli. Our protocol recommends low concentrations of exogenous palmitic acid in the growth medium, and bacteria harvest after the exponential phase.

Utilizing magnetic resonance techniques to study membrane interactions of amyloid peptides.

Alzheimer's disease (AD) is a common neurodegenerative condition that involves the extracellular accumulation of amyloid plaques predominantly consisting of Aβ peptide aggregates. The amyloid plaques and soluble oligomeric species of Aβ are believed to be the major cause of synaptic dysfunction in AD brain and their cytotoxic mechanisms have been proposed to involve interactions with cell membranes. In this review, we discuss our solid-state nuclear magnetic resonance (ssNMR) studies of Aβ interactions with model membranes.

On-cell nuclear magnetic resonance spectroscopy to probe cell surface interactions

Nuclear magnetic resonance (NMR) spectroscopy allows determination of atomic-level information about intermolecular interactions, molecular structure, and molecular dynamics in the cellular environment. This may be broadly divided into studies focused on obtaining detailed molecular information in the intracellular context ("in-cell") or those focused on characterizing molecules or events at the cell surface ("on-cell"). In this review, we outline some key NMR techniques applied for on-cell NMR studies through both solution-state and solid-state NMR and survey studies that have used these techniques to uncover key information. We particularly focus on application of on-cell NMR spectroscopy to characterize ligand interactions with cell surface membrane proteins such as G-protein coupled receptors (GPCRs), receptor tyrosine kinases, etc. These techniques allow for quantification of binding affinities, competitive binding assays, delineation of portions of ligands involved in binding, ligand bound-state conformational determination, evaluation of receptor structuring and dynamics, and inference of distance constraints characteristic of the ligand-receptor bound state. Excitingly, it is possible to avoid the barriers of production and purification of membrane proteins while obtaining directly physiologically-relevant information through on-cell NMR. We also provide a briefer survey of the applicability of on-cell NMR approaches to other classes of cell surface molecule.

Solid-state nuclear magnetic resonance study of polymorphism in tris(8-hydroxyquinolinate)aluminium.

Tris(8-hydroxyquinolinate)aluminium (Alq3 ) is a metal-organic coordination complex, which is a widely used electroluminescent material in organic light-emitting diode technology. Crystalline Alq3 is known to occur in five polymorphic forms (denoted α, β, γ, δ, and ε), although the structures of some of these polymorphs have been the subject of considerable debate. In particular, the structure of α-Alq3 , which is a model for the local structure in amorphous films used in devices, is highly complex and has never been conclusively solved. In this work, we use solid-state nuclear magnetic resonance (NMR) and density functional theory (DFT) calculations to investigate the local structure of four Alq3 samples. We find that the first structure proposed for α-Alq3 is inconsistent with all of the samples studied, and DFT calculations further suggest that this structure is energetically unfavourable. Instead, samples containing the meridional (mer) isomeric form are found to contain local structures consistent with ε-Alq3 , and a sample containing the facial (fac) isomeric form is consistent with a mixture of γ-Alq3 and δ-Alq3 . We also investigate the influence of different strategies for dispersion correction in DFT geometry optimisations. We find that a recently proposed modified semiempirical dispersion correction scheme gives good agreement with experiment. Furthermore, the DFT calculations also show that distinction between mer and fac isomers on the basis of ηQ that has been assumed in previous work is not always justified.

An advanced solid polymer electrolyte composed of poly(propylene carbonate) and mesoporous silica nanoparticles for use in all-solid-state lithium-ion batteries

Composite solid polymer electrolytes (CSPEs) are promising candidates for replacing potentially hazardous organic liquid electrolytes used in Li ion batteries (LIBs). CSPEs are easy to process, have the ability to form films, and make better interfacial contact. However, their poor mechanical strength, low ionic conductivity, and long cycling stability limit their practical applications. Here, we demonstrate the fabrication of a cost-effective, flexible, self-standing, and highly stable CSPE using poly(propylene carbonate) (PPC) as the host matrix and highly mesoporous silica nanoparticles (MSNs) as the filler. The fabricated CSPE had a high ionic conductivity of approximately 8.5 × 10−4 S cm−1 at 60°C, electrochemical potential stability up to approximately 4.8 V vs. Li/Li+, an ultra-high lithium transference number of approximately 0.86, impressive stability over 1000 h of Li stripping/plating, and an excellent electrode compatibility. With cyclability over 200 cycles and a negligible overpotential, the Li/CSPE/LFP cell delivered a reversible capacity of 171 and 103 mAh g−1 at 0.1 C and 1 C, respectively, with a good rate capability up to 5 C. The interaction of Li+ with PPC and the MSNs is demonstrated by solid-state magic angle spinning nuclear magnetic resonance (MAS-NMR) and X-ray photoelectron spectroscopy (XPS) studies. The enhanced physico-electrochemical properties of the CSPE were attributed to the large MSNs-related surface area, which enables firm interaction with the PPC matrix and provides a less-tortuous polymer-ceramic phase for fast lithium ion transportation. The proposed MSNs-reinforced CSPE thus opens new possibilities for the fabrication and engineering of solid-state batteries.

Impact of Annealing Time on Lithium Local Environment of LiMn0.5Ni0.5O2: DFT-Supported 6 Li Solid-State NMR Study

To quench the thirst of ever-increasing demand for high energy and low-Co lithium-ion batteries (LIB), LiMn0.5Ni0.5O2 has received considerable attention as a promising alternative cathode. However, it has been plagued by the structural failure driven by the irreversible phase change upon subsequent cycling and the structural degradation caused by the unavoidable Li/Ni exchange.[i] This brings the importance of understanding the relation with lithium local environments and domains on overall electrochemical properties of materials.In this study, we have focused on two different samples, prepared by different annealing times (150 vs. 15 hours) to elucidate the change of local lithium surroundings and its sensitivity to the annealing time. We use a combination of 6Li solid-state magic angle spinning (MAS) nuclear magnetic resonance (NMR)[ii] and density functional theory (DFT)[iii] techniques to illuminate the impact of annealing time to the local lithium environment of LiMn0.5Ni0.5O2. Examination of NMR spectra reveals peak shift and intensity change, which is scrutinized by the assistance of DFT that is capable of deconvoluting the NMR spectra and obtain the corresponding local lithium environment. We compare the NMR spectra of the previously reported transition metal arrangements such as a zigzag, row, and honeycomb structures and describe the influence of Li/Ni exchange on the shape of the spectra. Overall, we combine the various computed-NMR spectra that show in close proximity to the experimental spectra, which provides new insights to understand the correlation between annealing time and local lithium environment for a promising LIB cathode design. [i] Ceder, G. et al., Phase Transitions in the LiNi0.5Mn0.5O2 System, Chem. Mater. 2007, 19, 7, 1790–1800 [ii] Grey, C. P. et al., NMR Studies of Cathode Materials for Lithium-Ion Rechargeable Batteries, Chem. Rev. 2004, 104, 4493−4512[iii] Casas-Cabanas, M. et al., DFT-Assisted Solid-State NMR Characterization of Defects in Li2MnO3, Inorg. Chem. 2019, 58, 8347−8356

Enhanced Water Solubility and Oral Bioavailability of Paclitaxel Crystal Powders through an Innovative Antisolvent Precipitation Process: Antisolvent Crystallization Using Ionic Liquids as Solvent.

Paclitaxel (PTX) is a poor water-soluble antineoplastic drug with significant antitumor activity. However, its low bioavailability is a major obstacle for its biomedical applications. Thus, this experiment is designed to prepare PTX crystal powders through an antisolvent precipitation process using 1-hexyl-3-methylimidazolium bromide (HMImBr) as solvent and water as an antisolvent. The factors influencing saturation solubility of PTX crystal powders in water in water were optimized using a single-factor design. The optimum conditions for the antisolvent precipitation process were as follows: 50 mg/mL concentration of the PTX solution, 25 °C temperature, and 1:7 solvent-to-antisolvent ratio. The PTX crystal powders were characterized via scanning electron microscopy, Fourier transform infrared spectroscopy, high-performance liquid chromatography–mass spectrometry, X-ray diffraction, differential scanning calorimetry, thermogravimetric analysis, Raman spectroscopy, solid-state nuclear magnetic resonance, and dissolution and oral bioavailability studies. Results showed that the chemical structure of PTX crystal powders were unchanged; however, precipitation of the crystalline structure changed. The dissolution test showed that the dissolution rate and solubility of PTX crystal powders were nearly 3.21-folds higher compared to raw PTX in water, and 1.27 times higher in artificial gastric juice. Meanwhile, the bioavailability of PTX crystal increased 10.88 times than raw PTX. These results suggested that PTX crystal powders might have potential value to become a new oral PTX formulation with high bioavailability.