Solid-state 2H NMR Spectroscopy Research Articles

Assessment of Hydrophilicity/Hydrophobicity in Mesoporous Silica by Combining Adsorption, Liquid Intrusion, and Solid-State NMR Spectroscopy.

We have developed a comprehensive strategy for quantitatively assessing the hydrophilicity/hydrophobicity of nanoporous materials by combining advanced adsorption studies, novel liquid intrusion techniques, and solid-state NMR spectroscopy. For this, we have chosen a well-defined system of model materials, i.e., the highly ordered mesoporous silica molecular sieve SBA-15 in its pristine state and functionalized with different amounts of trimethylsilyl (TMS) groups, allowing one to accurately tailor the surface chemistry while maintaining the well-defined pore structure. For an absolute quantification of the trimethylsilyl group density, quantitative 1H solid-state NMR spectroscopy under magic angle spinning was employed. A full textural characterization of the materials was obtained by high-resolution argon 87 K adsorption, coupled with the application of dedicated methods based on nonlocal-density functional theory (NLDFT). Based on the known texture of the model materials, we developed a novel methodology allowing one to determine the effective contact angle of water adsorbed on the pore surfaces from complete wetting to nonwetting, constituting a powerful parameter for the characterization of the surface chemistry inside porous materials. The surface chemistry was found to vary from hydrophilic to hydrophobic as the TMS functionalization content was increased. For wetting and partially wetting surfaces, pore condensation of water is observed at pressures P smaller than the bulk saturation pressure p0 (i.e., at p/p0 < 1) and the effective contact angle of water on the pore walls could be derived from the water sorption isotherms. However, for nonwetting surfaces, pore condensation occurs at pressures above the saturation pressure (i.e., at p/p0 > 1). In this case, we investigated the pore filling of water (i.e., the vapor-liquid phase transition) by the application of a novel, liquid water intrusion/extrusion methodology, allowing one to derive the effective contact angle of water on the pore walls even in the case of nonwetting. Complementary molecular simulations provide density profiles of water on pristine and TMS-grafted silica surfaces (mimicking the tailored, functionalized experimental silica surfaces), which allow for a molecular view on the water adsorbate structure. Summarizing, we present a comprehensive and reliable methodology for quantitatively assessing the hydrophilicity/hydrophobicity of siliceous nanoporous materials, which has the potential to optimize applications in heterogeneous catalysis and separation (e.g., chromatography).

Ion Mobility in Hydroxy-Functionalized Ionic Liquids Depends on Cationic Clustering: Tracking the Alkyl Chain Length Behavior with Deuteron NMR Relaxation.

Observing and quantifying the like-charge attraction in liquids and solutions is still challenging. However, we showed that elusive cation-cation hydrogen bonding may govern the structure and interaction in hydroxyl-functionalized ionic liquids. Therefore, cationic cluster formation depends on the shape, charge distribution, and functionality of the ions. We demonstrated by means of solid-state 2H NMR spectroscopy that cationic clusters change the structure and dynamics of ionic liquids. With increasing alkyl chain length, we observed two deuteron quadrupole coupling constants for the OD groups, differing by about 30 kHz. The lower value was assigned to the cation-cation interaction, indicating that the average (c-c) hydrogen bonds are stronger than the (c-a) hydrogen bonds between the cation and the anion despite the repulsive and attractive Coulomb interaction in the first and latter cases. Ion mobility could be studied by 2H NMR spectroscopy, although the deuterons in the hydrogen-bonded clusters underwent fast exchange. Our results also showed that simple relaxation models are not applicable anymore and that anisotropic motion must be considered.

Molecular phenomena related to moisture uptake in amorphous solid dispersion loaded with bosentan monohydrate and copovidone

Amorphous bosentan alone lacks dissolution flux that could enhance its bioavailability. Its coamorphization with hydrophilic copovidone (1:1) enables to improve wettability and dissolution rate, but fine amorphous particles are prone to moisture uptake. Water sorbed on the surface of this amorphous solid dispersion can considerably alter its physical properties annihilating benefits of coamorphization. The gravimetric measurements of water uptake, the solid state 1H NMR spectroscopy and relaxometry enabled us to describe for the first time, phase changes initiated by hydration in amorphous bosentan systems. The properties of copovidone greatly impacted water uptake in bosentan solid dispersions. A nonlinear reduction of the Tg upon water sorption resulted in the transformation of the glassy state into the rubbery state at ambient temperature. The state diagrams were developed for optimization of manufacturing conditions, selection of suitable packaging material and storage temperature, ensuring long-term stability of amorphous bosentan products.

Mapping Hydrogens in Hydrous Materials

Hydrous materials such as clays, cements, hydroxyapatite, and metal hydroxides have been known and extensively used since antiquity. However, experimental elucidation of hydrogen in hydrous materials remains challenging due to the intrinsic insensitivity, limited accessibility, sample damage, or poor spectral resolution of many characterization methods. 1H solid-state NMR spectroscopy has evolved into an ideal site-specific characterization tool of hydrogen-containing materials, but its current application in hydrous materials is hampered by the low resolution of 1H NMR spectra in the solid state due to the presence of intense dipolar coupling networks and a narrow 1H chemical shift range. Herein, a significant advance in the characterization of hydrogens in hydrous materials is reported. A combination of magic-angle spinning (MAS) NMR, moderate 2H substitution, and high magnetic fields has unlocked the capacity of identifying many chemically similar while crystallographically distinct hydrogen sites in a prototypical hydrous material Y4(OH)10Br2·3H2O (LYH-Br) by 1D 1H solid-state NMR experiments. 1H NMR peaks were first tentatively assigned in accordance with the density functional theory (DFT) calculation results, and the assignment was further refined by 2D 1H–89Y heteronuclear correlation (HETCOR) and 1H–1H double-quantum (DQ) MAS NMR data. The order of 1H chemical shift (δiso) values provides valuable information on the relative strength of hydrogen bond for ten hydroxide hydrogen sites. The power of very high spectral resolution is further described by observing all triple-quantum (TQ) coherences in the 2D 1H–1H TQ MAS NMR spectrum, in which all spatial proximities among three hydrogen sites are resolved. This demonstration of the very high spectral resolution obtained in 1D and 2D 1H solid-state NMR experiments illustrates how scientists in various communities can now study the multiple hydrous species of hydrous materials and obtain previously inaccessible fine structural information.

How Like-Charge Attraction Influences the Mobility of Cations in Hydroxyl-Functionalized Ionic Liquids

Attractive interactions between ions of like charge remain an elusive concept. Observing and quantifying this type of interaction in liquids and solutions is still a major challenge. Recently, we have shown that cation-cation interactions are present in hydroxyl-functionalized ionic liquids and that they can be controlled by the shape, charge distribution and functionality of the ions. In the present study, we demonstrate that cationic cluster formation does not only change the local structures of the ionic liquids but also influences the dynamics of the cations in a characteristic way. We show that solid-state 2H NMR spectroscopy is well suited for the study of molecular motion, even if the hydrogen bonded species of interest are indistinguishable due to fast deuteron exchange. We also provide valuable information about the applicability of well-accepted relaxation models.

Creating Solid Solutions of Metallocenes: Migration of Nickelocene into the Ferrocene Crystal Lattice in the Absence of a Solvent

Ferrocene and nickelocene do not react with each other in solution; however, the large impact of the paramagnetic component on the ferrocene 1H NMR signal linewidth and relaxation times has been quantified. Co-crystallization of ferrocene and nickelocene at any ratio from a solvent can be explained with both pure substances crystallizing in the same space group P21/n. As a new phenomenon, when a ferrocene single crystal is exposed to polycrystalline nickelocene in the absence of a solvent, the nickelocene migrates into the ferrocene crystal lattice and a mixed crystal is formed that retains its macroscopic shape. This process has been proven visually by cutting the single crystal. Mixing polycrystalline ferrocene with polycrystalline nickelocene at different molar ratios with a mortar and pestle leads to crystalline solid solutions with the corresponding molar ratios of both components. This migration of one organometallic component into an existing crystal lattice of another at ambient temperature in the absence of a solvent has not been described previously. Paramagnetic 1H solid-state NMR spectroscopy of static and rotating samples of dry ferrocene/nickelocene mixtures at varying ratios is used to prove and quantify the mixing of both metallocenes at the molecular level. A single-crystal X-ray structure of a 50/50 mixed crystal corroborates the NMR results that nickelocene and ferrocene are randomly distributed in the lattice and that the space group P21/n is retained. All ferrocene molecules in the mixed crystal lattice show a broadening of their 1H wideline signals and residual magic-angle spinning (MAS) lines at ambient temperature. The broadening of the ferrocene signals correlates with the nickelocene content. 1H T1 relaxation time measurements for the signals of ferrocene in samples with different amounts of nickelocene corroborate the assumption that the signal broadening is due to paramagnetic dipole–dipole relaxation of ferrocene molecules in the vicinity of nickelocene. Spatially separated ferrocene and nickelocene powders in one rotor show the solid-state NMR characteristics of the individual polycrystalline metallocenes. The described formation of solid solutions of metallocenes in the absence of a solvent will open new pathways to homogeneously mixed nanoparticles with desired metal ratios and dual-atom catalysts.

Untangling the rivalry between cholesterol and antimicrobial peptides.

Antimicrobial peptides (AMPs) are promising candidates for next generation antimicrobial therapeutics. In mammalian cell membranes cholesterol plays a key regulatory function in antibiotic drug resistance and the immune response. However, the mechanism of action and the selectivity of AMPs towards bacterial membranes are not yet well understood. We hypothesized that differences in biophysical properties of mammalian versus bacterial membranes give rise to differences in peptide-membrane interactions which underlie the AMP mechanism and selectivity. Solid-state 2H NMR spectroscopy was employed to study di-monounsaturated phosphatidylcholine and phosphatidylethanolaminelipids (DOPC versus DOPE) bilayers in the presence of the antimicrobial peptide LL37 (2−4 mol%) and cholesterol (20−30% mol) as model systems mimicking mammalian and bacterial membranes. The lipid systems were probed with POPC-d31 (10 mol%) where the residual quadrupolar couplings yielded segmental order parameters (SCD) for the individual acyl segments. The LL37-peptide decreased the quadrupolar splittings indicating it increased the area per lipid, while cholesterol showed the opposite. The mean-torque model was used to calculate the key bilayer properties of area per lipid and bilayer thickness [2]. The model-free functional dependence of spin-lattice relaxation rates on SCD (square-law plots) indicated greater bending rigidity with cholesterol for both DOPC and DOPE membranes. By contrast LL37 decreased the bending rigidity of the membranes. Additionally all-atom molecular dynamics simulations for bilayers comprising POPE/DMPG/cardiolipin (90:5:5) and DMPC/cholesterol (90:10) were conducted with LL37 peptides on the bilayer surface to capture the molecular-level interactions. We observed partial insertion of the LL37-peptides in the POPE system, while the peptides were repelled from the membrane in the DMPC/cholesterol system. These observations reveal the surprising rivalry between cholesterol and AMPs which underlies AMP mechanism and selectivity.

Solid-state NMR spectroscopy uncovers internal dynamics of antiviral compounds.

In this study we analyzed the internal dynamics of antiviral compounds such as amantadine and rimantadine and the model compound hexamethylbenzene (HMB) using solid-state 2H NMR spectroscopy. Amantadine and rimantadine have been successfully used to treat influenza and dyskinesia, and their antiviral activity can be characterized using structural and dynamical information from solid-state 2H NMR relaxation. The relaxation data collected for a range of temperatures can be fit using analytical models for the internal dynamics of these compounds to yield physical parameters such as activation energies and diffusion constants that quantify the different modes of motion. Here, we performed quadrupolar-echo and relaxation experiments on powdered samples of deuterated amantadine, rimantadine, and HMB for temperatures between −150⁰C and 60⁰C. HMB displayed two rotational modes about its internal symmetry axes with vastly different timescales. Quadrupolar-echo spectra showed that rimantadine exhibits methyl rotation about its 3-fold axis with no rotation about the C-C axis linked to the cage, while amantadine undergoes slow rotation about the cage axis. The order parameters calculated from the residual quadrupolar couplings for all three compounds were large (>0.8), indicating restricted off-axial dynamics. Spin-lattice (T1Z) and quadrupolar-order relaxation times (T1Q) were calculated for different orientations within the polycrystalline samples. The temperature and angular dependences of these relaxation times were fit using three models: anisotropic rotational diffusion [1,2], axial diffusion, and discrete jumps, among which the anisotropic rotational diffusion model displayed universal applicability. Application of NMR relaxometry to these drugs within the membrane channel will further enable us to understand their activity and the effect of the lipid environment on their structural dynamics.

Packing and elasticity in membrane mechanical properties.

Here we address how membrane properties involving head group size, acyl chain unsaturation, and lipid packing affect their structure and dynamics. Strong out-of-plane proteolipid couplings considered by the flexible surface model (FSM) affect protein function through elastic forces described by the spontaneous curvature and the bending rigidity. We hypothesized that the mechanical properties and the molecular packing resulting from different lipid types are captured by introducing a perdeuterated POPC-d31 probe lipid. Di-monounsaturated phosphatidylcholine and phosphatidylethanolamine (DOPC, DOPE), and different ratios of DOPC/DOPE mixtures were studied using MD simulations combined with experimental solid-state 2H NMR spectroscopy. Residual quadrupolar couplings obtained from de-Paked powder-type spectra yielded order parameter (SCD) profiles for the individual acyl segments giving insights into average membrane structural properties such as area per lipid and bilayer thickness [1]. The corresponding spin-lattice relaxation rates (R1Z) for the resolved peaks followed a theoretical square-law dependence on SCD providing the bending rigidity [2]. Furthermore, MD simulations for the lipid systems were carried out and order parameters were calculated and compared against the NMR-observed SCD values. Utilization of the probe lipid POPC-d31 (1−10 mol%)affected the lamellar to hexagonal phase transition temperature of DOPE lipid systems but did not affect the quadrupolar splittings of DOPE and DOPC systems. Higher bending rigidity was observed for DOPE membranes versus DOPC supporting the idea that the membrane bending rigidity is primarily governed by increased lipid packing and is related to the area-compressibility modulus. Use of a probe lipid to capture membrane mechanical properties of complex lipid systems allow investigation of the relationship of membrane mechanics in vital biological functions.

Investigation of the interaction between adsorbed water and various morphologies of boehmite nanoparticles prepared by continuous supercritical hydrothermal synthesis

Boehmite applications are often subject to specific characteristics in terms of morphologies and surface properties. The versatile continuous supercritical hydrothermal method allows synthesizing various boehmite morphologies from rhombic to hexagonal platelet-like nanoparticles depending on the preferential adsorption of part of the precursor after transformation species on the (020) surface resulting in a preferential growth along [001] and mostly [100] directions. This adsorption on surface free sites plays the role of morphology stabilizer and results in the reduction of adsorbed water. The interaction between adsorbed water and the boehmite morphology depends on various parameters: 1) the structure order of boehmite as exhibited by XPS analysis associated with 1H Solid-State NMR spectroscopy and, 2) the number of available free sites, which tend to be filled by the adsorption of nitrates as observed by Raman spectroscopy.

Hydrates of active pharmaceutical ingredients: A 35Cl and 2H solid-state NMR and DFT study

This study uses 35Cl and 2H solid-state NMR (SSNMR) spectroscopy and dispersion-corrected plane-wave density functional theory (DFT) calculations to characterize the molecular-level structures and dynamics of hydrates of active pharmaceutical ingredients (APIs). We use 35Cl SSNMR to measure the EFG tensors of the chloride ions to characterize hydrated forms of hydrochloride salts of APIs, along with two corresponding anhydrous forms. DFT calculations are used to refine the crystal structures of the APIs and determine relationships between the 35Cl EFG tensors and the spatial arrangements of proximate hydrogen bonds, which are particularly influenced by interactions with water molecules. We find that the relationship between 35Cl EFG tensors and local hydrogen bonding geometries is complex, but meaningful structure/property relationships can be garnered through use of DFT calculations. Specifically, for every case in which such a comparison could be made, we find that the hydrate has a smaller magnitude of CQ than the corresponding anhydrous form, indicating a chloride ion environment with a ground-state electron density of higher spherical symmetry in the former. Finally, variable-temperature 35Cl and 2H SSNMR experiments on a deuterium-exchanged sample of the API cimetidine hydrochloride monohydrate are used to monitor temperature-dependent influences on the spectra that may arise from motional influences on the 35Cl and 2H EFG tensors. From the 2H SSNMR spectra, we determine that the motions of water molecules are characterized by jump-like motions about their C2 rotational axes that occur on timescales that are unlikely to influence the 35Cl central-transition (+1/2 ↔︎ −1/2) powder patterns (this is confirmed by 35Cl SSNMR). Together, these methods show great promise for the future study of APIs in their bulk and dosage forms, especially variable hydrates in which crystallographic water content varies with external conditions such as humidity.

Phospholipid headgroups govern area per lipid and emergent elastic properties of bilayers

Phospholipid bilayers are liquid-crystalline materials whose intermolecular interactions at mesoscopic length scales have key roles in the emergence of membrane physical properties. Here we investigated the combined effects of phospholipid polar headgroups and acyl chains on biophysical functions of membranes with solid-state 2H NMR spectroscopy. We compared the structural and dynamic properties of phosphatidylethanolamine and phosphatidylcholine with perdeuterated acyl chains in the solid-ordered (so) and liquid-disordered (ld) phases. Our analysis of spectral lineshapes of 1,2-diperdeuteriopalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE-d62) and 1,2-diperdeuteriopalmitoyl-sn-glycero-3-phosphocholine (DPPC-d62) in the so (gel) phase indicated an all-trans rotating chain structure for both lipids. Greater segmental order parameters (SCD) were observed in the ld (liquid-crystalline) phase for DPPE-d62 than for DPPC-d62 membranes, while their mixtures had intermediate values irrespective of the deuterated lipid type. Our results suggest the SCD profiles of the acyl chains are governed by methylation of the headgroups and are averaged over the entire system. Variations in the acyl chain molecular dynamics were further investigated by spin-lattice (R1Z) and quadrupolar-order relaxation (R1Q) measurements. The two acyl-perdeuterated lipids showed distinct differences in relaxation behavior as a function of the order parameter. The R1Z rates had a square-law dependence on SCD, implying collective mesoscopic dynamics, with a higher bending rigidity for DPPE-d62 than for DPPC-d62 lipids. Remodeling of lipid average and dynamic properties by methylation of the headgroups thus provides a mechanism to control the actions of peptides and proteins in biomembranes.

Different membrane order measurement techniques are not mutually consistent

“Membrane order” is a term commonly used to describe the elastic and mechanical properties of the lipid bilayer, though its exact meaning is somewhat context- and method dependent. These mechanical properties of the membrane control many cellular functions and are measured using various biophysical techniques. Here, we ask if the results obtained from various techniques are mutually consistent. Such consistency cannot be assumed a priori because these techniques probe different spatial locations and different spatial and temporal scales. We evaluate the change of membrane order induced by serotonin using nine different techniques in lipid bilayers of three different compositions. Serotonin is an important neurotransmitter present at 100s of mM concentrations in neurotransmitter vesicles, and therefore its interaction with the lipid bilayer is biologically relevant. Our measurement tools include fluorescence of lipophilic dyes (Nile Red, Laurdan, TMA-DPH, DPH), whose properties are a function of membrane order; atomic force spectroscopy, which provides a measure of the force required to indent the lipid bilayer; 2H solid-state NMR spectroscopy, which measures the molecular order of the lipid acyl chain segments; fluorescence correlation spectroscopy, which provides a measure of the diffusivity of the probe in the membrane; and Raman spectroscopy, where spectral intensity ratios are affected by acyl chain order. We find that different measures often do not correlate with each other and sometimes even yield conflicting results. We conclude that no probe provides a general measure of membrane order and that any inference based on the change of membrane order measured by a particular probe may be unreliable.

Purification and membrane interactions of human KCNQ1100–370 potassium ion channel

KCNQ1 (Kv7.1 or KvLQT1) is a voltage-gated potassium ion channel that is involved in the ventricular repolarization following an action potential in the heart. It forms a complex with KCNE1 in the heart and is the pore forming subunit of slow delayed rectifier potassium current (Iks). Mutations in KCNQ1, leading to a dysfunctional channel or loss of activity have been implicated in a cardiac disorder, long QT syndrome. In this study, we report the overexpression, purification, biochemical characterization of human KCNQ1100–370, and lipid bilayer dynamics upon interaction with KCNQ1100–370. The recombinant human KCNQ1 was expressed in Escherichia coli and purified into n-dodecylphosphocholine (DPC) micelles. The purified KCNQ1100–370 was biochemically characterized by SDS-PAGE electrophoresis, western blot and nano-LC-MS/MS to confirm the identity of the protein. Circular dichroism (CD) spectroscopy was utilized to confirm the secondary structure of purified protein in vesicles. Furthermore, 31P and 2H solid-state NMR spectroscopy in DPPC/POPC/POPG vesicles (MLVs) indicated a direct interaction between KCNQ100–370 and the phospholipid head groups. Finally, a visual inspection of KCNQ1100–370 incorporated into MLVs was confirmed by transmission electron microscopy (TEM). The findings of this study provide avenues for future structural studies of the human KCNQ1 ion channel to have an in depth understanding of its structure-function relationship.

First Direct Insight into the Local Environment and Dynamics of Water Molecules in the Whewellite Mineral Phase: Mechanochemical Isotopic Enrichment and High-Resolution 17O and 2H NMR Analyses.

Calcium oxalate minerals of the general formula CaC2O4.xH2O are widely present in nature and usually associated with pathological calcifications, constituting up to 70–80% of the mineral component of renal calculi. The monohydrate phase (CaC2O4.H2O, COM) is the most stable form, accounting for the majority of the hydrated calcium oxalates found. These mineral phases have been studied extensively via X-ray diffraction and IR spectroscopy and, to a lesser extent, using 1H, 13C, and 43Ca solid-state NMR spectroscopy. However, several aspects of their structure and reactivity are still unclear, such as the evolution from low- to high-temperature COM structures (LT-COM and HT-COM, respectively) and the involvement of water molecules in this phase transition. Here, we report for the first time a 17O and 2H solid-state NMR investigation of the local structure and dynamics of water in the COM phase. A new procedure for the selective 17O- and 2H-isotopic enrichment of water molecules within the COM mineral is presented using mechanochemistry, which employs only microliter quantities of enriched water and leads to exchange yields up to ∼30%. 17O NMR allows both crystallographically inequivalent water molecules in the LT-COM structure to be resolved, while 2H NMR studies provide unambiguous evidence that these water molecules are undergoing different types of motions at high temperatures without exchanging with one another. Dynamics appear to be essential for water molecules in these structures, which have not been accounted for in previous structural studies on the HT-COM structure due to lack of available tools, highlighting the importance of such NMR investigations for refining the overall knowledge on biologically relevant minerals like calcium oxalates.

Hydration, Refinement, and Dissolution of the Crystalline Phase in Polyamide 6 Polymorphs for Ultimate Thermomechanical Properties.

Timescales of polyamide 6 melt-shaping technologies, relative to the dynamics of conformational rearrangements upon crystallization, challenge the formation of the most thermodynamically favorable chain packing and thus optimum performance. In this publication, we make use of the mediation of hydrogen bonding by water molecules in the superheated state of water, i.e., above 100 °C in a closed environment, in the structural refinement of polyamide 6 for enhanced thermomechanical performance. The paper addresses dissolution and (re)crystallization of different polyamide 6 polymorphs in the superheated state of water by time-resolved simultaneous small- and wide-angle X-ray scattering and solid-state 1H NMR spectroscopy and the effect on mechanical properties. The experiments reveal that upon heating in the superheated state of water, the pseudo-hexagonal phase dissolves at relatively low temperature and instantly crystallizes in a defected monoclinic phase that successively refines to a perfected monoclinic structure. The dissolution temperature of the pseudo-hexagonal phase of polyamide 6 is found to be dependent on the degree of crystal perfection originating from conformational disorder and misalignment of hydrogen bonding in the lattice, retrospectively, to the Brill transition temperature. The perfected monoclinic phase below the dissolution temperature can be preserved upon cooling but is plasticized by hydration of the amide moieties in the crystalline phase. The removal of water from the hydrated crystals, in the proximity of Brill transition temperature, strengthening the hydrogen bonding, occurs. Retrospectively, the most thermodynamically stable crystallographic phase is preserved and renders an increase in mechanical properties and dimensional stability of the product. The insight obtained on the influence of superheated water on the structural refinement of imperfected crystallographic states assists in polyamide 6 postprocessing strategies for enhanced performance.

Cholesterol sulfate fluidizes the sterol fraction of the stratum corneum lipid phase and increases its permeability

Desulfation of cholesterol sulfate (CholS) to cholesterol (Chol) is an important event in epidermal homeostasis and necessary for stratum corneum (SC) barrier function. The CholS/Chol ratio decreases during SC maturation but remains high in pathological conditions, such as X-linked ichthyosis, characterized by dry and scaly skin. The aim of this study was to characterize the influence of the CholS/Chol molar ratio on the structure, dynamics, and permeability of SC lipid model mixtures. We synthesized deuterated CholS and investigated lipid models with specifically deuterated components using 2H solid-state NMR spectroscopy at temperatures from 25°C to 80°C. Although the rigid acyl chains in ceramides and fatty acids remained essentially rigid upon variation of the CholS/Chol ratio, both sterols were increasingly fluidized in lipid models containing higher CholS concentrations. We also show the X-ray repeat distance of the lipid lamellar phase (105 Å) and the orthorhombic chain packing of the ceramide’s acyl chains and long free fatty acids did not change upon the variation of the CholS content. However, the Chol phase separation visible in models with high Chol concentration disappeared at the 50:50 CholS/Chol ratio. This increased fluidity resulted in higher permeabilities to model markers of these SC models. These results reveal that a high CholS/Chol ratio fluidizes the sterol fraction and increases the permeability of the SC lipid phase while maintaining the lamellar lipid arrangement with an asymmetric sterol distribution.

Molecular Dynamics Studies of Aromatic Guests in Three Isostructural Inclusion Compounds with Molecular Boron–Nitrogen Hosts

The dynamics of three guests: benzene (ben), naphthalene (nap), and xylene (xyl) included in the isostructural cavities of tetrameric [(2fbe)2(bpy)⊃guest]4 cages were examined using single-crystal X-ray diffraction, thermogravimetric analysis, variable-temperature solid-state 2H NMR spectroscopy, and molecular dynamics simulations. The inclusion compounds were selected from a series of boron–nitrogen host adducts assembled in a 2:1 stoichiometric ratio from the catechol ester of 2,4-difluorophenylboronic acid (2fbe) and 4,4′-bipyridine (bpy) in the presence of aromatic guests. The dynamic characterization studies revealed that ben is highly mobile with fast in-plane jumps around the C6-axis above T = 150 K, with a calculated activation energy, Ea, of 4.9 kJ mol–1. Surprisingly, the larger guest nap experiences 180° jumps above 296 K. On the contrary, xyl guests can only experience 120° in-plane jumps at temperatures close to the decomposition point because the methyl groups act as effective stoppers.

Surface Chemistry of Nanohybrids with Fumed Silica Functionalized by Polydimethylsiloxane/Dimethyl Carbonate Studied Using 1H, 13C, and 29Si Solid-State NMR Spectroscopy.

The investigation of molecular interactions between a silica surface and organic/inorganic polymers is crucial for deeper understanding of the dominant mechanisms of surface functionalization. In this work, attachment of various depolymerized polydimethylsiloxanes (PDMS) of different chain lengths, affected by dimethyl carbonate (DMC), to silica nanoparticles pretreated at different temperatures has been studied using 29Si, 1H, and 13C solid-state NMR spectroscopy. The results show that grafting of different modifier blends onto a preheated silica surface depends strongly on the specific surface area (SSA) linked to the silica nanoparticle size distributions affecting all textural characteristics. The pretreatment at 400 °C results in a greater degree of the modification of (i) A-150 (SSA = 150 m2/g) by PDMS-10/DMC and PDMS-1000/DMC blends; (ii) A-200 by PDMS-10/DMC and PDMS-100/DMC blends; and (iii) A-300 by PDMS-100/DMC and PDMS-1000/DMC blends. The spectral features observed using solid-state NMR spectroscopy suggest that the main surface products of the reactions of various depolymerized PDMS with pretreated nanosilica particles are the (CH3)3SiO-[(CH3)2SiO-]x fragments. The reactions occur with the siloxane bond breakage by DMC and replacing surface hydroxyls. Changes in the chemical shifts and line widths, as shown by solid-state NMR, provide novel information on the whole structure of functionalized nanosilica particles. This study highlights the major role of solid-state NMR spectroscopy for comprehensive characterization of functionalized solid surfaces.

Interaction of the pitavastatin with model membranes

Pitavastatin is a statin drug that, by competitively inhibiting 3-hydroxy-3-methylglutaryl-coenzyme A reductase, can lower serum cholesterol levels of low-density lipoprotein (LDL) accompanied by side effects due to pleiotropic effects leading to statin intolerance. These effects can be explained by the lipophilicity of statins, which creates membrane affinity and causes statin localization in cellular membranes. In the current report, the interaction of pitavastatin with POPC model membranes and its influence on the membrane structure were investigated using 1H, 2H and 31P solid-state NMR spectroscopy. Our experiments show the average localization of pitavastatin at the lipid/water interface of the membrane, which is biased towards the hydrocarbon core in comparison to other statin molecules. The membrane binding of pitavastatin also introduced an isotropic component into the 31P NMR powder spectra, suggesting that some of the lamellar POPC molecules are converted into highly curved structures.