Solid-state 13C Research Articles

Crystal structure of rilpivirine hydrochloride, N6H19C22Cl

A monoclinic C form of rilpivirine hydrochloride, (N6H19C22)Cl, has been obtained and characterized using solid-state 15N, 13C, and 35Cl NMR spectroscopy and multitemperature synchrotron X-ray powder diffraction. The title compound crystallizes in the monoclinic system (space group C2/c, #15) at both room (295.0(2) K) and low (100.0(2) K) temperatures. At room temperature, the following parameters are a = 19.43051(3), b = 13.09431(14), c = 17.10254(18) Å, β = 109.3937(7), V = 4104.48(9) Å3, and Z = 8. The folded molecular conformation of the cation is similar with that of free base rilpivirine with the exception of cyanovinyl group disposition. The anion links cations to infinite chains parallel to the crystallographic c axis using N–H⋯Cl bonds where both amino groups and the protonated pyrimidine ring take part in the H-bonding. The powder patterns have been submitted to the ICDD for inclusion in the Powder Diffraction File™ (PDF®).

Changes in soil organic carbon components and microbial community following spent mushroom substrate application

While spent mushroom substrate (SMS) has shown promise in increasing soil organic carbon (SOC) and improving soil quality, research on the interplay between SOC components and microbial community following the application of diverse SMS types remains scant. A laboratory soil incubation experiment was conducted with application of two types of SMSs from cultivation of Pleurotus eryngii (PE) and Agaricus bisporus (AB), each at three application rates (3, 5.5, and 8%). Advanced techniques, including solid-state 13C nuclear magnetic resonance (NMR) and high-throughput sequencing, were employed to investigate on SOC fractions and chemical structure, microbial community composition and functionality. Compared to SMS-AB, SMS-PE application increased the relative abundances of carbohydrate carbon and O-alkyl C in SOC. In addition, SMS-PE application increased the relative abundance of the bacterial phylum Proteobacteria and those of the fungal phyla Basidiomycota and Ascomycota. The relative abundances of cellulose-degrading bacterial (e.g., Flavisolibacter and Agromyces) and fungal genera (e.g., Myceliophthora, Thermomyces, and Conocybe) were increased as well. The application of SMS-AB increased the aromaticity index of SOC, the relative abundance of aromatic C, and the contents of humic acid and heavy fraction organic carbon. In addition, SMS-AB application significantly increased the relative abundances of the bacterial phyla Firmicutes and Actinobacteria. Notably, the genera Actinomadura, Ilumatobacter, and Bacillus, which were positively correlated with humic acid, experienced an increase in relative abundance. Functional prediction revealed that SMS-PE application elevated carbohydrate metabolism and reduced the prevalence of fungal pathogens, particularly Fusarium. The application of high-rate SMS-AB (8%) enhanced bacterial amino acid metabolism and the relative abundances of plant pathogenic fungi. Our research provides strategies for utilizing SMS to enrich soil organic carbon and fortify soil health, facilitating the achievement of sustainable soil management.

Magic Angle Spinning Solid-State 13C Photochemically Induced Dynamic Nuclear Polarization by a Synthetic Donor-Chromophore-Acceptor System at 9.4 T.

Solid-state photochemically induced dynamic nuclear polarization (photo-CIDNP) is a nuclear magnetic resonance spectroscopy technique in which nuclear spin hyperpolarization is generated upon optical irradiation of an appropriate donor-acceptor system. Until now, solid-state photo-CIDNP at high magnetic fields has been observed only in photosynthetic reaction centers and flavoproteins. In the present work, we show that the effect is not limited to such biomolecular samples, and solid-state 13C photo-CIDNP can be observed at 9.4 T under magic angle spinning using a frozen solution of a synthetic molecular system dissolved in an organic solvent. Signal enhancements for the source molecule larger than a factor of 2300 are obtained. In addition, we show that bulk 13C hyperpolarization of the solvent can be generated via spontaneous 13C-13C spin diffusion at natural abundance.

Molecular structure and selective theophylline complexation by conformational change of diethyl N,N'-(1,3-phenylene)dicarbamate.

The receptor ability of diethyl N,N'-(1,3-phenylene)dicarbamate (1) to form host-guest complexes with theophylline (TEO) and caffeine (CAF) by mechanochemistry was evaluated. The formation of the 1-TEO complex (C12H16N2O4·C7H8N4O2) was preferred and involves the conformational change of one of the ethyl carbamate groups of 1 from the endo conformation to the exo conformation to allow the formation of intermolecular interactions. The formation of an N-H...O=C hydrogen bond between 1 and TEO triggers the conformational change of 1. CAF molecules are unable to form an N-H...O=C hydrogen bond with 1, making the conformational change and, therefore, the formation of the complex impossible. Conformational change and selective binding were monitored by IR spectroscopy, solid-state 13C nuclear magnetic resonance and single-crystal X-ray diffraction. The 1-TEO complex was characterized by IR spectroscopy, solid-state 13C nuclear magnetic resonance, powder X-ray diffraction and single-crystal X-ray diffraction.

Opposing patterns of carbon and nitrogen stability in soil organic matter fractions compared to whole soil

AbstractNitrogen (N) released from soil organic matter (SOM) is quantitatively important for crop uptake, even when adequate fertiliser N is supplied. Understanding of SOM has shifted to recognise distinct fractions that correlate with properties such as turnover time, carbon (C) and N content, and chemical composition. Yet, how these fractions relate to N supply from SOM is poorly understood. This study aimed to link N mobilisation and C stability in coarse (≥50 μm) and fine (≤50 μm) fractions, and evaluate the roles of these fractions in supplying N in cropping soil. Soils from long‐term continuous cotton, cotton‐vetch, and cotton‐wheat rotations and a nearby uncleared site (NV) were separated into coarse and fine fractions, left as whole soil, or dispersed and freeze‐dried as a fractionation control. Initial C chemistry in fractions and whole soils was measured by solid state 13C NMR spectroscopy. N mobilisation and CO2 loss were measured over a 14‐day incubation experiment. In the cropping soils, net immobilisation of N was measured in the separate fractions, while net mobilisation was found in the whole soils. In the NV soil, N mobilisation was greater in the fine fraction. C mineralisation followed the order fine fraction > fractionation control = coarse fraction > whole soil. C stability was best explained by physical protection within whole soil structure rather than chemical recalcitrance or mineral stabilisation. The results revealed an unexpected contrast between C and N mineralisation from SOM fractions and demonstrated the importance of soil aggregates for SOM stability. We show a cautionary impact of fractionation on C and N dynamic, highlighting the need for further research to understand the synergistic behaviour of SOM fractions in whole soils.

Probing the Molecular and Macroscopic Structure of Solid Solutions by Dynamic Nuclear Polarization (DNP) Enhanced 13C and 15N Solid-State NMR Spectroscopy.

Crystallization is a widely used purification technique in the manufacture of active pharmaceutical ingredients (APIs) and precursor molecules. However, when impurities and desired compounds have similar molecular structures, separation by crystallization may become challenging. In such cases, some impurities may form crystalline solid solutions with the desired product during recrystallization. Understanding the molecular structure of these recrystallized solid solutions is crucial to devise methods for effective purification. Unfortunately, there are limited analytical techniques that provide insights into the molecular structure or spatial distribution of impurities that are incorporated within recrystallized products. In this study, we investigated model solid solutions formed by recrystallizing salicylic acid (SA) in the presence of anthranilic acid (AA). These two molecules are known to form crystalline solid solutions due to their similar molecular structures. To overcome challenges associated with the long 1H longitudinal relaxation times (T1(1H)) of SA and AA, we employed dynamic nuclear polarization (DNP) and 15N isotope enrichment to enable solid-state NMR experiments. Results of solid-state NMR experiments and DFT calculations revealed that SA and AA are homogeneously alloyed as a solid solution. Heteronuclear correlation (HETCOR) experiments and plane-wave DFT structural models provide further evidence of the molecular-level interactions between SA and AA. This research provides valuable insights into the molecular structure of recrystallized solid solutions, contributing to the development of effective purification strategies and an understanding of the physicochemical properties of solid solutions.

Continuous straw returning enhances the carbon sequestration potential of soil aggregates by altering the quality and stability of organic carbon

Soil structure plays an important role in organic carbon (OC) sequestration, thereby influencing soil fertility and changes in global climate. However, aggregate OC chemical structure changes due to long-term return of straw in oasis farmland of arid northwest China remains unclear. This study conducted 0-, 5-, 10-, 15-, and 20-year straw returning experiments during which three soil components where measured: (1) the functional carbon (C) pool and macroaggregates; (2) microaggregates and silt + clay; (3) the chemical structure of soil OC (SOC). The results demonstrated that in comparison with the control, straw return increased SOC, particulate OC (POC), and mineral-associated OC (MAOC) by 21.90%–63.51%, 5.00%–31.00%, and 46.00%–226.00%, respectively. With increasing duration of straw return, microaggregates transitioned to macroaggregates, and percentages of soil macroaggregates under 10-year straw return increased by 20.26%, 3.39%, 4.40%, and 11.12% compared with that under 0-, 5-, 15- and 20-year straw return, respectively. Soil geometric mean diameter (GMD) and mean weight diameter (MWD) first increased and then decreased, with maximum values after 10-year straw return at 1.20 mm and 1.63 mm, respectively. Solid state 13C NMR (Nuclear Magnetic Resonance) indicated O-alkyl C to be the dominant chemical component of soil OC over different years of straw return. There were increases in aromatic C, aromaticity, and hydrophobicity up to 10-year straw return, after which they decreased. A mantel test confirmed positive correlations of the distributions of macroaggregates, microaggregates, OC of macroaggregates, and silt + clay with MWD and GMD, whereas the OC content of aggregates was positively correlated with O-OA and hydrophobicity. Long-term straw returns improved soil structure and stabilized soil OC, thereby facilitating soil sequestration of OC.

The immobilization of cadmium by rape straw derived biochar in alkaline conditions: Sorption isotherm, molecular binding mechanism, and in-situ remediation of Cd-contaminated soil

The issue of cadmium (Cd) contamination in alkaline soils is escalating, necessitating the prompt implementation of effective passivation strategies. Biochar has gained significant attention for its potential in immobilizing heavy metals; however, the suitability of biochar as a remediation material and its micro-scale interaction mechanisms with Cd under alkaline conditions remain unclear. Rape straw (RS) were pyrolyzed at 400 °C (RB400) and 700 °C (RB700) to produce biochar. Adsorption and soil incubation experiments were carried out to assess the feasibility of using rape straw derived biochar pyrolyze at different temperatures and understanding their remediation mechanisms in alkaline environments. The sorption capacity for Cd immobilization was evaluated using sorption isotherms, revealing that RB700 exhibited enhanced Cd sorption performance with a maximum sorption capacity of 119.33 mg g−1 calculated from the Langmuir isotherm equation at pH 8. Cd L3-edge X-ray absorption near-edge structure (XANES) spectroscopy analysis confirmed that the dominant sorption species of Cd were organic Cd in RB400, with CdCO3 precipitation increased to 73.9% in RB700. Solid-state 13C nuclear magnetic resonance (13C-NMR) spectroscopy demonstrated that aromatic and carboxyl C functional groups are involved in the organic sorption of Cd through complexation and Cd2+-π interactions in alkaline solutions. The precipitation of CdCO3 in RB700 may resulted in a more effective passivation effect compared to RB400, leading to a significant 15.54% reduction in the DTPA-Cd content in Cd-contaminated soil. These findings highlight the effective Cd passivation Cd in alkaline environments by rape straw derived biochar, providing new molecular insights into the Cd retention mechanism of biochar. Furthermore, it presents novel ideas for improving remediation approaches for alkaline Cd-contaminated soils.

Hydrothermal carbonization of two-phase olive mill waste (alperujo): Effect of aqueous phase recycling

Hydrothermal carbonization (HTC) is a promising technique for the conversion of lignocellulosic biomass, such as two-phase olive mill waste (TPOMW). However, the resulting generated aqueous phase (AP) rich in organic compounds is harmful if directly discharged in the environment. In this work, the use of recycled aqueous phase from the HTC process of TPOMW is evaluated as a reactive medium. The evolution of products yields, quality, morphology chemical structure, and composition with AP recycling runs are investigated by different analytical methods (Nuclear Magnetic Spectroscopy 1H and solid state 13C, Scanning Electron Microscopy, Elemental analysis, Proximate analysis, Fourier Infrared Transform spectroscopy, Total organic carbon, and total nitrogen). The results revealed significant improvement in the hydrochar yield and energy yield that increase 47.4 wt% to 53.0 wt% and 72.8%–81.3%, respectively. The increase in the number of recycling experiments promotes the lignin condensation as well as the polymerization of AP intermediates into microspheres. These phenomena lead to the increase in hydrochar yield as well as the modification of its micro-surface into a smooth porous surface through the recycling runs. Additionally, FT-IR and the solid state 13C NMR analysis demonstrated that AP recycling has no noticeable effect on the chemical structure of the produced hydrochars. Further analysis of the AP demonstrated that the total organic carbon and total nitrogen increase significantly after the first recycling run from 17.3 to 26.5 g/L and 0.4–0.6 g/L, respectively. The 1H NMR analysis revealed that AP is mainly formed by aliphatic and aromatic compounds.

Construction of a food waste biochar model and determination of contaminant adsorption sites: Combining experimental characterisation with quantum chemical calculations

Increasing urbanization has made it a serious challenge to deal with food waste (FW) from people and wastewater with pollutants from industry. Biochar from FW pyrolysis(FWB) can be used as an adsorbent to adsorb pollutants from wastewater, but its molecular structure is still unknown, limiting the understanding of its adsorption mechanism and its application in industry. In this paper, a series of combined methods of experimental characterization and quantum chemical calculations, such as solid-state 13C nuclear magnetic resonance spectroscopy (13C NMR), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) were used to investigate and successfully construct a model of the molecular structural features of FWB under the optimal contaminant adsorption preparation conditions. Based on the electrostatic potential distribution and adsorption experiments, the adsorption sites of the pollutants were elucidated. The results showed that the FWB prepared at different temperatures, 450 °C had a variety of oxygen-containing functional groups and polarity favorable for adsorption. In the molecular structure of FWB with the molecular formula C60H49N7O8, oxygen is present in the form of carboxyl, carbonyl, ether, alcohol hydroxyl, and phenol hydroxyl groups with numbers 1, 1, 1, 1, 2, 1, 2. Nitrogen is present in the form of pyridinyl nitrogen, pyrrolidinyl nitrogen, and primary amines with numbers 1, 1, and 5, respectively. In addition, nitrogen-containing and oxygen-containing functional groups are possible adsorption sites for pollutants on FWB, and alcohol hydroxyl and amino groups can bind better to Cu2+, which provides scientific guidance for improving the adsorption performance of biochar. This provides a solid foundation for the study of the microscopic adsorption mechanism of FWB and a method for the modeling of biochar from other biomasses.

Structural analyses of supernatant fractions in TEMPO-oxidized pulp/water reaction mixtures separated by centrifugation and dialysis

Side reactions occurring on cellulose during 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TMEPO)-catalyzed oxidation have not been considered to be significant. Then, TEMPO-oxidized hardwood and softwood bleached kraft pulps (HBKP and SBKP) were prepared with an excess NaOCl·5H2O. Supernatant fractions (SFs) were obtained in the aqueous reaction mixtures of TEMPO-oxidized pulps by centrifugation and dialysis. The SFs with carboxyl contents of 5.0 and 4.2 mmol/g were obtained in the yields of 19 % and 30 % from HBKP and SBKP, respectively. These carboxy contents are much higher than those (2.6–2.7 mmol/g) of the precipitate fractions in the TEMPO-oxidized pulps. Solid-state 13C NMR spectra and other analyses revealed that the water-soluble β-(1 → 4)-polyglucuronic acids were predominantly present in the SFs. In addition, water-insoluble TEMPO-oxidized cellulose nanocrystals were present in the SFs, but they constituted less than ~10 % of the SFs. The mass-average degrees of polymerization (DPw) of the SFs obtained from HBKP and SBKP were 166 and 155, respectively, whereas the original HBKP and SBKP had DPw values of 1990 and 2140, respectively. These substantial depolymerization and formation of the water-soluble β-(1 → 4)-polyglucuronic acids occur on cellulose and oxidized cellulose molecules as side reactions during TEMPO-catalyzed oxidation, which should be considered for structural analyses of TEMPO-oxidized products.

Analysis of natural organic matter chemistry in bentonite clay under compaction using different dry densities and duration

The Nuclear Waste Management Organization of Canada has adopted an adaptive phased management plan for the long-term storage of used nuclear fuel in a Deep Geological Repository (DGR). The DGR barrier system employs copper-coated used fuel containers (UFCs) surrounded by buffer material which is composed of highly compacted bentonite clay. The natural organic matter (NOM) composition of the compacted bentonite is of practical importance for the safety assessment as it regulates the biogeochemical processes at the interface between the UFCs and the buffer layer. However, insufficient investigations on NOM constituents limits the understanding of biogeochemical dynamics in bentonites compacted under different dry densities. This study analyzed the carbon content and NOM composition using targeted compound analysis and solid-state 13C nuclear magnetic resonance (NMR) spectroscopy with bentonites compacted at 1.1, 1.4 or 1.6 g/cm3 dry density for 1, 3, 6, 12 or 18 months. Organic carbon contents were similar across bentonites with different compaction densities at various durations as compared to the reference clay (powdered bentonite sample before compaction). The overall NOM composition measured by solid-state 13C NMR suggested a predominance of alkyl and aromatic carbon in bentonite samples. No marked variations were observed for the NOM components (i.e., alkyl, O-alkyl and aromatic carbon) between the compacted bentonites and the reference clay. Targeted compound analysis revealed that the extractable lipid concentrations in the compacted clays did not significantly vary from the reference bentonite with only some compounds exhibiting nano-gram level differences. Bentonites with relatively lower dry densities (1.1 and 1.4 g/cm3) demonstrated slightly higher extractable compound concentrations, but these differences were not statistically significant. In contrast, the compound concentrations of bentonites compacted to 1.6 g/cm3 were similar or slightly lower compared with the reference bentonite, likely associated with limited microbial growth under high dry compaction density. Taken together, these results suggested that NOM composition and quantity did not significantly alter in bentonites under various pressures nor with longer experimental durations. These findings highlight that compacted bentonite exhibited geochemical stability under the simulated repository environments, which provides critical insight for design and performance of engineered barrier system in a DGR concept.

Single-Step Synthesis and Characterization of Non-Linear Tough and Strong Segmented Polyurethane Elastomer Consisting of Very Short Hard and Soft Segments and Hierarchical Side-Reacted Networks and Single-Step Synthesis of Hierarchical Hyper-Branched Polyurethane.

Polyurethane elastomers are among the most versatile classes of industrial polymers-typically achieved through a two-step synthesis of segmented block copolymers, comprising very long and soft segments that provide elasticity and significantly long and hard segments that provide strength. The present research focused on the design of a single-step synthesis of a new segmented polyurethane consisting of very short soft and hard segments, crosslinked by preferentially side-reacted hierarchical tertiary oligo-uret network structures, thus exhibiting significant strength, elasticity, and toughness. Despite the theoretically linear structure, both FTIR and solid-state 13C NMR spectroscopy analyses indicated the quasi-equal presence of urethane groups and tertiary oligo-uret structures in the resulting polymer, indicating a preferential consecutive side reaction mechanism. Thermal analysis indicated the significant crystallization of soft segments consisting of only four ethylene oxide units, which was, hereby, demonstrated to occur via an extended chain mechanism. Tensile mechanical properties included significant strength, elasticity, and toughness. Increasing the soft segment length led to a decreased tertiary oligo-uret secondary crosslinking efficacy. The preferential hierarchical side reaction mechanism was, hereby, further confirmed through the synthesis of a completely new type of hyper-branched polymer via diisocyanate and a mono-hydroxy-terminated reagent. The structure-property relations and reaction mechanisms demonstrated in the present research can facilitate the design of new polyurethanes of enhanced performance and processing efficacy for a variety of novel applications.

Biomass derived cellulose nanofiber loaded PVA-nanocurcumin coating for extending the shelf life of Mandarin oranges (Citrus reticulata)

The concern over agricultural waste disposal can be resolved by converting them into value-added products. Here, sustainable fruit coatings and films have been developed via. wealth from waste concept. The cellulose nanofibers (CNF) have been extracted from the waste onion skin. The isolated CNF has been characterised using scanning electron microscopy (SEM), transmission electron microscopy (TEM), optical microscopy (OM), dynamic light scattering (DLS) and solid-state 13C NMR spectroscopy. A combination of cellulose nanofiber (CNF) and nanocurcumin in polyvinyl alcohol (PVA) matrix has been used for the fabrication of coating over fresh mandarin oranges. The effect of nanocurcumin in PVA-CNF nanocomposite on the post-harvest maintenance of mandarin oranges has been investigated. The morphology of the prepared films is studied by SEM and atomic force microscopy (AFM). The quality of the orange fruits coated using the above formulation by dip coating method was analysed via. weight loss analysis, total soluble solid (TSS), pH, titrable acidity (TA) and antioxidant activities. It was found that the nanocurcumin incorporated PVA-CNF coating was effective in reducing mass loss and maintaining the physiochemical properties of oranges in comparison with other formulations. The developed method could be extended to use as food packaging films, which would be a sustainable solution for agricultural waste valorisation and plastic pollution. Through this research work, we propose an environment friendly approach for the preservation of fruits and vegetables.

Research on Strengthening Fragile Paper with Polyvinylamine.

Paper documents are an important carrier of information related to human civilization, with the reinforcement and protection of fragile paper documents being a key aspect of their protection. This research utilized amphoteric polyvinylamine polymer as a paper reinforcement agent, strengthening the Xuan paper commonly used in paper documents. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectroscopy (XPS), solid-state 13C NMR, and other analytical methods were employed to compare the physical properties, micro-morphology, crystallinity, and aging resistance of the paper before and after reinforcement. Research was conducted on the effects of reinforcement, the aging resistance, and the effects on the fiber structure. The results indicate that polyethylenimine has a filling and bridging effect between the paper fibers. After treatment with polyethylenimine, there was a significant improvement in the folding endurance and tensile strength of the paper. Additionally, the paper maintains a good mechanical strength even after undergoing dry heat and humid aging.

Enhancing the Crystallinity of Keto-enamine-Linked Covalent Organic Frameworks through an in situ Protection-Deprotection Strategy.

β-Keto-enamine-linked 2D covalent organic frameworks (COFs) have emerged as highly robust materials, showing significant potential for practical applications. However, the exclusive reliance on 1,3,5-triformylphloroglucinol (Tp aldehyde) in the design of such COFs often results in the production of non-porous amorphous polymers when combined with certain amine building blocks. Attempts to adjust the crystallinity and porosity by a modulator approach are inefficient because Tp aldehyde readily forms stable β-keto-enamine-linked monomers/oligomers with various aromatic amines through an irreversible keto-enol tautomerization process. Our research employed a unique protection-deprotection strategy to enhance the crystallinity and porosity of β-keto-enamine-linked squaramide-based 2D COFs. Advanced solid-state NMR studies, including 1D 13 C CPMAS, 1 H fast MAS, 15 N CPMAS, 2D 13 C-1 H correlation, 1 H-1 H DQ-SQ, and 14 N-1 H HMQC NMR were used to establish the atomic-level connectivity within the resultant COFs. The TpOMe -Sqm COFs synthesized utilizing this strategy have a surface area of 487 m2 g-1 , significantly higher than similar COFs synthesized using Tp aldehyde. Furthermore, detailed time-dependent PXRD, solid-state 13 C CPMAS NMR, and theoretical DFT studies shed more light on the crystallization and linkage conversion processes in these 2D COFs. Ultimately, we applied this protection-deprotection method to construct novel keto-enamine-linked highly porous organic polymers with a surface area of 1018 m2 g-1 .

Controlled Sublimation Rate of Guest Drug from Polymorphic Forms of a Cyclodextrin-Based Polypseudorotaxane Complex and Its Correlation with Molecular Dynamics as Probed by Solid-State NMR.

Encapsulation of active pharmaceutical ingredients (APIs) in confined spaces has been extensively explored as it dramatically alters the molecular dynamics and physical properties of the API. Herein, we explored the effect of encapsulation on the molecular dynamics and physical stability of a guest drug, salicylic acid (SA), confined in the intermolecular spaces of γ-cyclodextrin (γ-CD) and poly(ethylene glycol) (PEG)-based polypseudorotaxane (PPRX) structure. The sublimation tendency of SA encapsulated in three polymorphic forms of the γ-CD/PEG-based PPRX complex, monoclinic columnar (MC), hexagonal columnar (HC), and tetragonal columnar (TC), was investigated. The SA sublimation rate was decreased by 3.0-6.6-fold and varied in the order of MC form > HC form > TC form complex. The 13C and 1H magic-angle spinning (MAS) solid-state nuclear magnetic resonance (NMR) spectra and 13C spin-lattice relaxation time (T1) indicated that the encapsulated SA molecules existed as the monomeric form, and its molecular mobility increased in the order of MC form > HC form > TC form complex. In the complexes, a rapid chemical exchange between two dynamic states of SA (free and bound) was suggested, with varying adsorption/desorption rates accounting for its distinct molecular mobility. This adsorption/desorption process was influenced by proton exchange at the interaction site and interaction strength of SA in the complexes, as evidenced by 1H MAS spectra and temperature dependency of the 13C carbonyl chemical shift. A positive correlation between the molecular mobility of SA and its sublimation rate was established. Moreover, the molecular mobility of γ-CD and PEG in the complexes coincided with that of SA, which can be explained by fast guest-driven dynamics. This is the first report on the stability improvement of an API through complexation in polymorphic supramolecular host structures. The relationship between the molecular dynamics and physical properties of encapsulated API will aid in the rational design of drug delivery systems.

Activity of a Recombinant Chitinase of the Atta sexdens Ant on Different Forms of Chitin and Its Fungicidal Effect against Lasiodiplodia theobromae.

This study evaluates the activity of a recombinant chitinase from the leaf-cutting ant Atta sexdens (AsChtII-C4B1) against colloidal and solid α- and β-chitin substrates. 1H NMR analyses of the reaction media showed the formation of N-acetylglucosamine (GlcNAc) as the hydrolysis product. Viscometry analyses revealed a reduction in the viscosity of chitin solutions, indicating that the enzyme decreases their molecular masses. Both solid state 13C NMR and XRD analyses showed minor differences in chitin crystallinity pre- and post-reaction, indicative of partial hydrolysis under the studied conditions, resulting in the formation of GlcNAc and a reduction in molecular mass. However, the enzyme was unable to completely degrade the chitin samples, as they retained most of their solid-state structure. It was also observed that the enzyme acts progressively and with a greater activity on α-chitin than on β-chitin. AsChtII-C4B1 significantly changed the hyphae of the phytopathogenic fungus Lasiodiplodia theobromae, hindering its growth in both solid and liquid media and reducing its dry biomass by approximately 61%. The results demonstrate that AsChtII-C4B1 could be applied as an agent for the bioproduction of chitin derivatives and as a potential antifungal agent.

Biodegradable Nanocomposites Based on Blends of Poly(Butylene Adipate-Co-Terephthalate) (PBAT) and Thermoplastic Starch Filled with Montmorillonite (MMT): Physico-Mechanical Properties.

Poly(butylene adipate-co-terephthalate) (PBAT) is widely used for production of biodegradable films due to its high elongation, excellent flexibility, and good processability properties. An effective way to develop more accessible PBAT-based bioplastics for wide application in packaging is blending of PBAT with thermoplastic starch (TPS) since PBAT is costly with prices approximately double or even triple the prices of traditional plastics like polyethylene. This study is focused on investigating the influence of TPS/PBAT blend ratio and montmorillonite (MMT) content on the physical and mechanical properties and molecular mobility of TPS-MMT/PBAT nanocomposites. Obtained TPS-MMT/PBAT nanocomposites through the melt blending process were characterized using tensile testing, dynamic mechanical thermal analysis (DMTA), and X-ray diffraction (XRD), as well as solid-state 1H and 13C NMR spectroscopy. Mechanical properties demonstrated that the addition of TPS to PBAT leads to a substantial decrease in the tensile strength as well as in the elongation at break, while Young's modulus is rising substantially, while the effect of the MMT addition is almost negligible on the tensile stress of the blends. DMTA results confirmed the formation of TPS domains in the PBAT matrix. With increasing TPS content, mobility of starch-rich regions of TPS domains slightly increases. However, molecular mobility in glycerol-rich regions of TPS domains in the blends was slightly restricted. Moreover, the data obtained from 13C CP/MAS NMR spectra indicated that the presence of TPS in the sample decreases the mobility of the PBAT chains, mainly those located at the TPS/PBAT interfaces.

The hidden depths of forest soil organic carbon chemistry in a pumice soil

Forest ecosystems can store massive amounts of organic carbon (OC) deep in their soils. Soil OC (SOC) is composed of several complex organic compounds of which groupings of these organic compounds can provide an insight into evaluating the formation and fate of SOC. However, there is little information available regarding the chemical composition of deep forest SOC and how they compare to upper soil depths. The objective of this study was to explore the SOC chemistry changes with increasing soil depth on a fine spatial scale in a planted forest soil derived from young volcanic erupted airfall deposits. Soil core samples to 1 m depth were collected from Puruki Experimental Forest (New Zealand) and examined for incremental depth changes in SOC functional groups, or chemical shift regions, using solid-state 13C cross polarisation magic angle spinning nuclear magnetic resonance (13C CPMAS-NMR) spectroscopy. The results showed that soil depth was a driver of change in soil chemical shift regions. The presence of a coarse-textured soil horizon, lapilli layer, at depth was a driver of significant (p < 0.05) differences between SOC functional groups. In the upper soil profile (0–10 cm), the chemical shift distribution was dominated by O-alkyl C (39%) followed by alkyl C (32%), aromatic C (23%), and carboxyl C (6%). In the deep soil layers, we found alkyl C increased below the lapilli layer (varying depth > 50 cm) compared to above the lapilli layer. In the deep soil layers the alkyl C was the dominant functional group (55%), followed by O-alkyl C (28%). Furthermore, there was a decrease at depth in aromatic (12%) and carboxyl C (5%). The A/O-A ratio increased with depth from soil above the lapilli layer compared to soils below the lapilli layer indicating a greater degree of organic matter decomposition and a corresponding decrease in the labile OC fractions. Within the lapilli layer the SOC functional groups and A/O-A ratio were highly variable. These results highlight that changes in SOC chemical composition occur with increasing soil depth, a property of deep soil that is frequently understudied, and are highly influenced by the multi layered nature of soil derived from volcanic airfall deposits.