Solid-phase Synthesis Research Articles

Macromolecular tool box to elucidate CLAVATA3/Embryo Surrounding Region-Related-RLK binding, signaling and downstream effects.

Plant peptides communicate by binding to a large family of receptor-like kinases (RLKs) and they share a conserved binding mechanism, which may account for their promiscuous interaction with several RLKs. In order to understand the in vivo binding specificity of CLAVATA3/Embryo Surrounding Region-Related peptide family, we have developed a novel set of CLAVATA 3 (CLV3) based peptide tools. After carefully evaluating the CLE peptide binding characteristics, using solid phase synthesis process, we have modified the CLV3 peptide and attached a fluorophore and a photoactivable side group. We observed that the labeled CLV3 shows binding specificity within CLAVATA1 clade of RLKs while avoiding the distantly-related PEP RECEPTOR clade, thus resolving the contradictory results obtained previously by many in vitro methods. Furthermore, we observed that the RLK-bound CLV3 undergoes clathrin-mediated endocytosis and gets trafficked to vacuole via ARA7-labeled endosomes. Additionally, modifying CLV3 for light-controlled activation enabled spatial and temporal control over CLE signalling. Hence, our CLV3 macromolecular toolbox can be used to study rapid cell specific down-stream effects. Given the conserved binding properties, in the future our toolbox can also be used as a template to modify other CLE peptides.

Targeted modulation of gene expression through receptor-specific delivery of small interfering RNA peptide conjugates.

Small interfering RNA (siRNA) has emerged as a valuable tool to address RNA interference (RNAi) to modulate gene expression also in therapy. However, challenges such as inefficient cell targeting and rapid degradation in biological systems have limited its success. To address these issues, the development of a receptor-specific shuttle system represents a promising solution. [F7,P34]-NPY analogues were modified by solid-phase peptide synthesis, enabling non-covalent conjugation with siRNA. This modification yielded an efficient siRNA vehicle capable of binding and transporting its cargo into target cells without adversely affecting receptor activation or cell viability. Mass spectrometry and gel shift assays confirmed successful and stable siRNA binding under various conditions. Microscopy experiments further demonstrated the co-internalization of labeled peptides and siRNA in Hepa1c1 cells, highlighting the stability of the complex. In vitro quantitative RT-PCR experiments, targeting the TSC22D4 gene to normalize systemic glucose homeostasis and insulin resistance, revealed a functional peptide-based siRNA shuttle system with the ability to decrease mRNA expression to approximately 40%. These findings strengthen the potential of receptor-specific siRNA shuttle systems as efficient tools for gene therapy that offer a possibility for reducing side effects.

Engineered Phenylalanine Ammonia-Lyases for the Enantioselective Synthesis of Aspartic Acid Derivatives.

Biocatalytic hydroamination of alkenes is an efficient and selective method to synthesize natural and unnatural amino acids. Phenylalanine ammonia-lyases (PALs) have been previously engineered to access a range of substituted phenylalanines and heteroarylalanines, but their substrate scope remains limited, typically including only arylacrylic acids. Moreover, the enantioselectivity in the hydroamination of electron-deficient substrates is often poor. Here, we report the structure-based engineering of PAL from Planctomycesbrasiliensis (PbPAL), enabling preparative-scale enantioselective hydroaminations of previously inaccessible yet synthetically useful substrates, such as amide- and ester-containing fumaric acid derivatives. Through the elucidation of cryo-electron microscopy (cryo-EM) PbPAL structure and screening of the structure-based mutagenesis library, we identified the key active site residue L205 as pivotal for dramatically enhancing the enantioselectivity of hydroamination reactions involving electron-deficient substrates. Our engineered PALs demonstrated exclusive a-regioselectivity, high enantioselectivity, and broad substrate scope. The potential utility of the developed biocatalysts was further demonstrated by a preparative-scale hydroamination yielding tert-butyl protected l-aspartic acid, widely used as intermediate in peptide solid-phase synthesis.

Bifunctional octadentate pseudopeptides as Zirconium-89 chelators for immuno-PET applications

BackgroundPositron emission tomography (PET) is a highly sensitive method that provides fine resolution images, useful in the field of clinical diagnostics. In this context, Zirconium-89 (89Zr)-based imaging agents have represented a great challenge in molecular imaging with immuno-PET, which employs antibodies (mAbs) as biological vectors. Indeed, immuno-PET requires radionuclides that can be attached to the mAb to provide stable in vivo conjugates, and for this purpose, the radioactive element should have a decay half-life compatible with the time needed for the biodistribution of the immunoglobulin. In this regard, 89Zr is an ideal radioisotope for immuno-PET because its half-life perfectly matches the in vivo pharmacokinetics of mAbs.ResultsThe main objective of this work was the design and synthesis of a series of bifunctional octadentate pseudopeptides able to generate stable 89Zr complexes. To achieve this, here we investigated hydroxamate, N-methylhydroxamate and catecholate chelating moieties in complexing radioactive zirconium. N-methylhydroxamate proved to be the most effective 89Zr-chelating group. Furthermore, the increased flexibility and hydrophilicity obtained by using polyoxyethylene groups spacing the hydroxamate units led to chelators capable of rapidly forming (15 min) stable and water-soluble complexes with 89Zr under mild reaction conditions (aqueous environment, room temperature, and physiological pH) that are mandatory for complexation reactions involving biomolecules. Additionally, we report challenge experiments with the competitor ligand EDTA and metal ions such as Fe3+, Zn2+ and Cu2+. In all examined conditions, the chelators demonstrated stability against transmetallation. Finally, a maleimide moiety was introduced to apply one of the most promising ligands in bioconjugation reactions through Thiol-Michael chemistry.ConclusionCombining solid phase and solution synthesis techniques, we identified novel 89Zr-chelating molecules with a peptide scaffold. The adopted chemical design allowed modulation of molecular flexibility, hydrophilicity, as well as the decoration with different zirconium chelating groups. Best results in terms of 89Zr-chelating properties were achieved with the N-methyl hydroxamate moiety. The Zirconium complexes obtained with the most effective compounds were water-soluble, stable to transmetallation, and resistant to peptidases for at least 6 days. Further studies are needed to assess the potential of this novel class of molecules as Zirconium-chelating agents for in vivo applications.

Multimaterial 3D Laser Printing of Cell-Adhesive and Cell-Repellent Hydrogels.

Here, a straightforward method is reported for manufacturing 3D microstructured cell-adhesive and cell-repellent multimaterials using two-photon laser printing. Compared to existing strategies, this approach offers bottom-up molecular control, high customizability, and rapid and precise 3D fabrication. The printable cell-adhesive polyethylene glycol (PEG) based material includes an Arg-Gly-Asp (RGD) containing peptide synthesized through solid-phase peptide synthesis, allowing for precise control of the peptide design. Remarkably, minimal amounts of RGD peptide (<0.1wt%) suffice for imparting cell-adhesiveness, while maintaining identical mechanical properties in the 3D printed microstructures to those of the cell-repellent, PEG-based material. Fluorescent labeling of the RGD peptide facilitates visualization of its presence in cell-adhesive areas. To demonstrate the broad applicability of the system, the fabrication of cell-adhesive 2.5D and 3D structures is shown, fostering the adhesion of fibroblast cells within these architectures. Thus, this approach allows for the printing of high-resolution, true 3D structures suitable for diverse applications, including cellular studies in complex environments.

Biocompatible Synthesis of Macrocyclic Thiazol(in)e Peptides.

Macrocyclic peptides containing a thiazole or thiazoline in the backbone are considered privileged structures in both natural compounds and drug discovery, owing to their enhanced bioactivity, stability, and permeability. Here, we present the biocompatible synthesis of macrocyclic peptides from N-terminal cysteine and C-terminal nitrile. While the N-terminal cysteine is incorporated during solid-phase peptide synthesis, the C-terminal nitrile is introduced during cleavage with aminoacetonitrile, utilizing a cleavable benzotriazole linker. This method directly yields the fully functionalized linear peptide precursor. The biocompatible cyclization reaction occurs in buffer at physiological pH and room temperature. The resulting thiazoline heterocycle remains stable in buffer but hydrolyzes under acidic conditions. While such hydrolysis enables access to macrocyclic peptides with a complete amide backbone, mild oxidation of the thiazoline leads to the stable thiazole macrocyclic peptide. While conventional oxidation strategies involve metals, we developed a protocol simply relying on alkaline salt and air. Therefore, we offer a rapid and metal-free pathway to macrocyclic thiazole peptides, featuring a biocompatible key cyclization step.

A Quick Joule‐Heating Coupled with Solid‐Phase Synthesis for Carbon‐Supported Pd–Se Nanoparticles Toward High‐Efficiency Electrocatalysis

AbstractWith respect to the potential of palladium (Pd)‐based nanomaterials in catalyzing typical electrochemical reactions, herein, a strategy that couples the quick Joule‐heating with a solid phase synthesis for producing carbon‐supported Pd–Se nanoparticles with welcome features is reported, e.g., fine sizes, clean surfaces, and controlled crystal phases toward electrocatalysis of oxygen reduction reaction (ORR) and ethanol oxidation reaction (EOR) in an alkaline medium. Principally, the introduction of Se into Pd alters its electronic properties and weakens the adsorption of key reaction intermediates on the Pd–Se nanoparticles during the ORR and EOR process, thus endowing them with better electrocatalysis for the same electrochemical reactions. Impressively, the carbon‐supported Pd–Se nanoparticles exhibit phase‐dependent electrocatalysis toward ORR and EOR. In particular, the cubic Pd17Se15 nanoparticles supported on carbon substrate show mass activity of 0.206 A mgPd−1 and specific activity of 0.546 mA cm−2 at 0.9 V for ORR in 0.1 m KOH electrolyte, while the orthorhombic PdSe2 nanoparticles show a mass activity of 3.79 A mgPd−1 for EOR, higher than that of their cubic counterpart and commercial Pd/C catalyst. The universality of this synthetic strategy in manufacturing carbon‐supported noble metal chalcogenide nanoparticles and highlighting its potential in designing highly efficient electrocatalysts are emphasized.

1,2,3-Triazole-containing azamacrocycles from chiral triazolopeptoids: synthesis and solid-state studies.

Two new chiral 1,2,3-triazole-containing macrocyclic oligoamides (i.e.: triazolopeptoid 4 and 5) were obtained through solid-phase synthesis of linear precursors followed by high dilution macrocyclization reaction. Theoretical (DFT) and spectroscopic (NMR) studies revealed the intricate interplay between the Na-chiral side chains and their conformational attitudes. BH3-mediated reduction of the tertiary amide groups of known 1-3 and newly synthesized 4 gave novel azamacrocycles 6-9. Detection of borane complexes of azamacrocycles 6 and 9 (i.e.: 10 and 11), corroborated by X-ray diffraction studies, demonstrated the peculiar properties of 1,2,3-triazole-containing macrorings.

Ethylthio-1H-tetrazole (ETT) as coupling additive for the solid-phase synthesis (SPS) of hindered amino acid-containing peptides

Peptides are finding broad applications in drug discovery as Active Pharmaceutical Ingredients (APIs) and delivery systems, and also in the field of new materials. In this context, the increasing relevance of these molecules has fueled the development of more efficient synthetic strategies at both research and industrial scales. The new generation of peptides in the market contains hindered amino acids, examples include the antidiabetic and antiobesity drugs semaglutide and tirzepatide, which contain α,α-dimethylglycine (Aib), and trofinetide, which contains α-methylproline. Given that peptide synthesis involves the proper combination of protecting groups and coupling reagents, it is important to develop coupling strategies for these hindered amino acid-containing peptides. In this first communication, we report that ethylthio-1H-tetrazole (ETT), a reagent widely used in oligonucleotide synthesis but unknown in peptide synthesis, is well suited to be used in combination with N.N’-diisopropylcarbodiimide (DIC) for the preparation of hindered amino acid-containing peptides. ETT is more acidic than 1-hydroxybenzotriazole (HOBt) and ethyl 2-hydroxyimino-2-cyanoacetate (OxymaPure), and, as such, the active species formed will have an excellent leaving group, thereby facilitating the coupling reaction. To demonstrate this concept, we synthesized analogs of Leu-enkephalin amide, where the two consecutive Gly amino acids were substituted by Aib, NMeGly, and NMeAla. The syntheses carried out with ETT were superior to those done with OxymaPure, HOBt, and 1-hydroxy-7-azabenzotriazole. (HOAt). However, in terms of racemization, ETT showed poorer performance than the other coupling additives, especially in the case of His(Trt). In conclusion, ETT emerges as an important contributor to the toolbox of coupling reagents and additives used for peptide and amide formation.

Impact of Single Acyclic Phosphonate Nucleotide (ZNA) Modifications on DNA Duplex Stability.

An acyclic phosphonate-linked nucleic acid backbone (ZNA) demonstrated the capability to support duplex formation and propagate genetic information in vivo, unveiling its potential for evolution into a synthetic genetic system (XNA). To determine the structural impact of such modification, modified Dickerson Drew DNA dodecamers (DDDs) were prepared by solid phase synthesis, each containing either an (R) or (S) isomeric form of a cytosine ZNA nucleotide. While the DDD is known to adopt a stable duplex, both duplex and hairpin forms were simultaneously observed for both modified oligonucleotides by NMR spectroscopy over a broad temperature range (5-65 °C). Diffusion-ordered spectroscopy (DOSY) experiments allowed to separate duplex and hairpin signals based on the different diffusion constants of both conformational states. For the oligomer containing (R)-ZNA, only the duplex form occurred at 5 °C, while it was not possible to determine by NMR a single hairpin conformation at higher temperatures. In the case of the (S)-ZNA nucleoside modified oligomer, both hairpin and duplex forms were observable at 0 °C, while a single hairpin conformation was detected at 37 °C, suggesting a higher destabilizing effect on dsDNA.

Studying the synthesis regularities of adsorbents based on the oxides Li4Ti5O12 and Li2TiO3

Using solid-phase, hydrothermal and sol-gel synthesis methods, adsorbents based on double oxides Li2TiO3 and Li4Ti5O12 were obtained. The influence of the synthesis conditions of samples on their phase composition, surface morphology, texture and adsorption properties was studied. It has been established that as a result of solid-phase synthesis reactions initiated by heating at 700 and 800 °C, single-phase oxides Li4Ti5O12 and Li2TiO3 are obtained, the values of the parameter a of the crystal lattice of which are close to the reference data and are 8.289 and 5.026 Å, respectively. The samples have a macromesoporous texture and have a low specific surface area (8 and 9 m2/g) and a mesopore volume (0.01 and 0.02 cm3/g). The adsorption capacity of the obtained oxides Li4Ti5O12 and Li2TiO3 reaches 7.9 and 6.3 mmol/g, respectively. The obtained oxides are of interest for further research as selective adsorbents of Li+ ions.

Molecular farming for sustainable production of clinical-grade antimicrobial peptides.

Antimicrobial peptides (AMPs) are emerging as next-generation therapeutics due to their broad-spectrum activity against drug-resistant bacterial strains and their ability to eradicate biofilms, modulate immune responses, exert anti-inflammatory effects and improve disease management. They are produced through solid-phase peptide synthesis or in bacterial or yeast cells. Molecular farming, i.e. the production of biologics in plants, offers a low-cost, non-toxic, scalable and simple alternative platform to produce AMPs at a sustainable cost. In this review, we discuss the advantages of molecular farming for producing clinical-grade AMPs, advances in expression and purification systems and the cost advantage for industrial-scale production. We further review how 'green' production is filling the sustainability gap, streamlining patent and regulatory approvals and enabling successful clinical translations that demonstrate the future potential of AMPs produced by molecular farming. Finally, we discuss the regulatory challenges that need to be addressed to fully realize the potential of molecular farming-based AMP production for therapeutics.

Small animal PET imaging with the 68Ga-labeled pH (low) insertion peptide-like peptide YJL-4 in a triple-negative breast cancer mouse model

BackgroundThe aim of this study was to prepare a novel 68Ga-labeled pH (low) insertion peptide (pHLIP)-like peptide, YJL-4, and determine its value for the early diagnosis of triple-negative breast cancer (TNBC) via in vivo imaging of tumor-bearing nude mice. The novel peptide YJL-4 was designed using a template-assisted method and synthesized by solid-phase peptide synthesis. After modification with the chelator 1,4,7‑triazacyclononane-N,N′,N″-triacetic acid (NOTA), the peptide was labeled with 68Ga. Then, the biodistribution of 68Ga-YJL-4 in tumor-bearing nude mice was investigated, and the mice were imaged by small animal positron emission tomography (PET).ResultsThe radiochemical yield and radiochemical purity of 68Ga-YJL-4 were 89.5 ± 0.16% and 97.95 ± 0.06%, respectively. The biodistribution of 68Ga-YJL-4 in tumors (5.94 ± 1.27% ID/g, 6.72 ± 1.69% ID/g and 4.54 ± 0.58% ID/g at 1, 2 and 4 h after injection, respectively) was significantly greater than that of the control peptide in tumors at the corresponding time points (P < 0.01). Of the measured off-target organs, 68Ga-YJL-4 was highly distributed in the liver and blood. The small animal PET imaging results were consistent with the biodistribution results. The tumors were visualized by PET at 2 and 4 h after the injection of 68Ga-YJL-4. No tumors were observed in the control group.ConclusionsThe novel pHLIP family peptide YJL-4 can adopt an α-helical structure for easy insertion into the cell membrane in an acidic environment. 68Ga-YJL-4 was produced in high radiochemical yield with good stability and can target TNBC tissue. Moreover, the strong concentration of radioactive 68Ga-YJL-4 in the abdomen does not hinder the imaging of early TNBC.

Development of a synthetic relaxin-3/INSL5 chimeric peptide ligand for NanoBiT complementation binding assays

INSL5 and relaxin-3 are relaxin family peptides with important roles in gut and brain function, respectively. They mediate their actions through the class A GPCRs RXFP4 and RXFP3. RXFP4 has been proposed to be a therapeutic target for colon motility disorders whereas RXFP3 targeting could be effective for neurological conditions such as anxiety. Validation of these targets has been limited by the lack of specific ligands and the availability of robust ligand-binding assays for their development. In this study, we have utilized NanoBiT complementation to develop a SmBiT-conjugated tracer for use with LgBiT-fused RXFP3 and RXFP4. The low affinity between LgBiT:SmBiT should result in a low non-specific luminescence signal and enable the quantification of binding without the tedious separation of non-bound ligands. We used solid-phase peptide synthesis to produce a SmBiT-labelled RXFP3/4 agonist, R3/I5, where SmBiT was conjugated to the B-chain N-terminus via a PEG12 linker. Both SmBiT-R3/I5 and R3/I5 were synthesized and purified in high purity and yield. Stable HEK293T cell lines expressing LgBiT-RXFP3 and LgBiT-RXFP4 were produced and demonstrated normal signaling in response to the synthetic R3/I5 peptide. Binding was first characterized in whole-cell binding kinetic assays validating that the SmBiT-R3/I5 bound to both cell lines with nanomolar affinity with minimal non-specific binding without bound and free SmBiT-R3/I5 separation. We then optimized membrane binding assays, demonstrating easy and robust analysis of both saturation and competition binding from frozen membranes. These assays therefore provide an appropriate rigorous binding assay for the high-throughput analysis of RXFP3 and RXFP4 ligands.

Process Development of a Macrocyclic Peptide Inhibitor of PD-L1.

This article outlines the process development leading to the manufacture of 800 g of BMS-986189, a macrocyclic peptide active pharmaceutical ingredient. Multiple N-methylated unnatural amino acids posed challenges to manufacturing due to the lability of the peptide to cleavage during global side chain deprotection and precipitation steps. These issues were exacerbated upon scale-up, resulting in severe yield loss and necessitating careful impurity identification, understanding the root cause of impurity formation, and process optimization to deliver a scalable synthesis. A systematic study of macrocyclization with its dependence on concentration and pH is presented. In addition, a side chain protected peptide synthesis is discussed where the macrocyclic protected peptide is extremely labile to hydrolysis. A computational study explains the root cause of the increased lability of macrocyclic peptide over linear peptide to hydrolysis. A process solution involving the use of labile protecting groups is discussed. Overall, the article highlights the advancements achieved to enable scalable synthesis of an unusually labile macrocyclic peptide by solid-phase peptide synthesis. The sustainability metric indicates the final preparative chromatography drives a significant fraction of a high process mass intensity (PMI).

Optimization of peptide synthesis time and sustainability using novel eco-friendly binary solvent systems with induction heating on an automated peptide synthesizer.

On December 12th, 2023, the European Commission took regulatory action to amend Annex XVII of REACH, imposing restrictions on the use of N,N-dimethylformamide (DMF) within the EU market owing to its high toxicity. Historically, DMF has been widely considered the gold standard for solid-phase peptide synthesis (SPPS). Being urgent to propose alternative solvents, we tested the suitability of non-hazardous neat and mixed solvents. Notably, binary solvent mixtures containing dimethyl sulfoxide as one of the solvent partners demonstrated high efficacy in solubilizing reagents while maintaining the desired swelling characteristics of common resins. A series of binary solvent mixtures were tested in automated SPPS, both at room temperature and high temperature, employing the PurePep® Chorus synthesizer, which enabled controlled induction heating between 25 and 90°C with oscillation mixing. The performances were assessed in challenging peptide sequences, i.e., ACP (65-74), and in longer and aggregating sequences like SARS-CoV-2 RBM (436-507) and β-amyloid (1-42). Furthermore, as part of the proposed sustainable approach to minimize the utilization of hazardous solvents, we coupled the novel PurePep EasyClean catch-and-release purification technology. This work, addressing regulatory compliance, emphasizes the crucial role of green chemistry in advancing safer and more environmentally friendly practices in SPPS.

Synthesis of Cyclopeptides Analogues of Natural Products and Evaluation as Herbicides and Inhibitors of Cyanobacteria.

Natural products derived from plants or microorganisms have been considered as eco-friendly herbicides with application in crop protection. Several natural cyclopeptides have been reported as herbicides, while others have been identified as inhibitors of cyanobacteria. In this work, the syntheses of cyclotetrapeptides and cyclopentapeptides analogues of natural products were successfully performed by solid-phase peptide synthesis of their linear precursor and solution-phase macrolactamization. Four of the obtained peptides and cyclopeptides present phytotoxicity with more than 70% of radicle growth inhibition at 67 μg/mL. In addition, evaluation of 20 peptides and cyclopeptides, as inhibitors of cyanobacteria, rendered five active compounds that reduced the concentration of microcystins in the culture medium.

Aqueous and Solid Phase Synthesis of [Ni(Me3en)(acac)]BPh4 and its Solvatochromic Properties: A Laboratory Experiment for First-Year Undergraduates

Aqueous and Solid Phase Synthesis of [Ni(Me₃en)(acac)]BPh₄ and its Solvatochromic Properties: A Laboratory Experiment for First-Year Undergraduates

Challenges with the Synthesis of a Macrocyclic Thioether Peptide: From Milligram to Multigram Using Solid Phase Peptide Synthesis (SPPS).

We describe an optimization and scale-up of the 45-membered macrocyclic thioether peptide BMS-986189 utilizing solid-phase peptide synthesis (SPPS). Improvements to linear peptide isolation, macrocyclization, and peptide purification were demonstrated to increase the throughput and purification of material on scale and enabled the synthesis and purification of >60 g of target peptide. Taken together, not only these improvements resulted in a 28-fold yield increase from the original SPPS approach, but also the generality of this newly developed SPPS purification sequence has found application in the synthesis and purification of other macrocyclic thioether peptides.

Efficient Synthetic Access to Stable Isotope Labelled Pseudouridine Phosphoramidites for RNA NMR Spectroscopy.

Here we report the efficient synthetic access to 13C/15N-labelled pseudouridine phosphoramidites, which were incorporated into a binary H/ACA box guide RNA/product complex comprising 77 nucleotides (nts) in total and into a 75 nt E. coli tRNAGly. The stable isotope (SI) labelled pseudouridines were produced via a highly efficient chemo-enzymatic synthesis. 13C/15N labelled uracils were produced via chemical synthesis and enzymatically converted to 5'-monophosphate pseudouridine (ΨMP) by using YeiN, a Ψ-5'-monophosphate C-glycosidase. Removal of the 5'-phosphate group yielded the desired pseudouridine nucleoside (Ψ), which was transformed into a phosphoramidite building suitable for RNA solid phase synthesis. A Ψ -building block carrying both a 13C and a 15N label was incorporated into a product RNA and the complex formation with a 63 nt H/ACA box RNA could be observed via NMR. Furthermore, the SI labelled pseudouridine building block was used to determine imino proton bulk water exchange rates of a 75 nt E. coli tRNAGly CCmnm5U, identifying the TΨC-loop 5-methyluridine as a modifier of the exchange rates. The efficient synthetic access to SI labelled Ψ building blocks will allow the solution and solid-state NMR spectroscopic studies of Ψ containing RNAs and will facilitate the mass spectrometric analysis of Ψ-modified nucleic acids.