Solar Thermal Energy Conversion Research Articles

Photothermal conversion-enhanced thermoelectric generators combined with supercapacitors: An efficacious approach to integrated power generation and storage

Thermoelectric generators (TEGs), which harness and convert solar-thermal energy into electrical energy, possess immense potential within the field of photothermal conversion (PTC). However, the widespread adoption of conventional TEGs in PTC domain has encountered some obstacles, which represent that TEGs have poor inherent PTC performance, resulting in low solar-thermoelectric conversion efficiency, and this solar-thermal-electric conversion method lacks the capability of electrical energy storage. Hence, an urgent imperative exists to develop integrated and synergistic energy technologies that can respond to these underlying challenges. Herein, we reported a novel strategy for employing spinel-type Cu1.5Mn1.5O4 PTC coating to adorn conventional TEG to construct the solar-thermoelectric generator (STEG) which exhibited excellent solar-thermoelectric conversion capability, and then integrating the STEG in series with a supercapacitor composed of synthetic ionic liquid electrolytes and carbon electrodes to fulfill the conversion and storage of solar-thermal energy into electrical energy. The results indicated that, when compared to a conventional TEG, the STEG attained a drastically elevated internal temperature difference due to the excellent PTC capability of spinel-type coating. As a result, remarkable enhancements were observed in both the steady-state voltages (Voc) and maximum output power density (Pmax) of the STEG, exceeding a 6-fold and 40-fold increase, respectively. Furthermore, we conducted experimental validation to ascertain the viability of the solar-driven STEG to charge a supercapacitor, thereby achieving the conversion and storage of solar-thermal energy into electrical energy, and the working mechanism of this integrated system has been revealed. This study offers invaluable insights into the development of highly efficient solar-thermal energy conversion and storage methods.

High performance composite phase change materials enhanced via evaporation-induced hydrogen bond network refactoring

Composite phase change materials (CPCMs) with real-time thermal harvesting are in high demand in the solar-thermal energy conversion industry. However, poor heat conduction, lack of strength and leakage problem severely restrict its availability. In this study, we develop an evaporation-inspired, facile, and versatile strategy for manufacturing shape stable CPCMs from organohydrogels with enhanced thermal performances for advanced thermal energy storage and management. Organohyodrogels contained with graphene nanoplatelets (GNPs) served as the template. By the oven-drying of the organohydrogel, hydrogen bonding reconstruction would assist in the formation of a dense polymer layer to encapsulate PCMs, forming the non-leakage CPCMs. The strong capillary force generated during the oven-drying process would induce the alignment of GNPs, forming thermal conduction pathways. The as-prepared composite exhibits a high thermal conductivity (1.25 W m-1K−1), satisfactory latent heat storage (171.5 J g−1) and excellent Young’s modulus (8.3 MPa). When subjected to solar radiation, solar energy is converted to heat and stored inside the material with the conversion efficiency as high as 95.8 %. The robust composite with high performance is expected to be an efficient and reliable thermal management material in solar-thermal energy conversion.

Cost-efficient sunlight-driven thermoelectric electrolysis over Mo-doped Ni5P4 nanosheets for highly efficient alkaline water/seawater splitting

Thermoelectric water spitting to hydrogen systems has great potential in the production of environment-friendly fuel using renewable solar energy in the future. In this work, we prepared porous nanosheet Mo doping Ni5P4 catalysts on nickel foam with efficient hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) performance in alkaline media. DFT calculations and experimental studies have shown that Mo doping deadeneds the interaction between H and O atomic orbitals of transition state water molecules, effectively weakening the activation energy of H2O dissociation. Therefore, Mo doping is favorable for enhancing HER activity with overpotential at 10 mA cm–2 of 93 mV and Tafel slope of 40.1 mV dec–1 in 1 M KOH. Besides, it exhibits high alkaline OER activity with an ultra-low overpotential of 200 mV at 10 mA cm–2. Moreover, this catalyst only needs 1.537 V in a dual-electrode configuration of the electrolytic cell, which is much lower than the commercial Pt/C-RuO2 couple (1.614 V). In addition, we have developed and constructed a solar thermoelectric generator (TEG) that is capable of floating on water. This TEG has a continuous power output and an exceptionally long lifespan, providing a stable power supply to the synthesized catalyst electrolyzer. It can produce a maximum power output of over 90 mW, meeting the requirement of converting solar radiation heat into usable electricity. As a result, the system achieves productivity of 0.11 mL min–1 H2. This solar thermal energy conversion technology shows the possibility of large-scale industrial production of H2 and provides a new idea for exploring heat source utilization.

NUMERICAL HEAT TRANSFER ENHANCEMENT OF SOLAR RECEIVER TUBE OF PARABOLIC TROUGH COLLECTOR USING FIBERFRAX 140 COATED WITH AL 2O 3

Parabolic trough collectors (PTCs) play a vital role in solar-thermal energy conversion, with the absorber tube being central to heat collection efficiency. This study investigates the potential for improving heat transfer within the PTC absorber tube using Fiberfrax 140 coated with Al 2O 3 as a novel reflector material. The research is driven by the ongoing pursuit of enhanced PTC performance. A standard modeling approach was employed, utilizing Computational Fluid Dynamics (CFD) analysis with SolidWorks Flow Simulation software, coupled with solar simulations to assess collector performance under varying conditions. Environmental parameters of Bauchi such as temperature, humidity, and wind speed were sourced from the Nigerian Meteorological Agency (NiMet). Optimization techniques were implemented to establish the optimal design configuration. The optimal design parameters were determined as a focal length of 700mm and a rim angle of 90°. Simulations were conducted daily from 8:00 AM to 5:00 PM, encompassing the period of January to June. A mass flow rate of 0.2 kg/s, informed by existing literature, was employed in the simulations. The results indicate improved collector performance throughout the simulated period, with peak thermal efficiency ranging from70%to82%.

Multifunctional flexible composite membrane based on nanocellulose-modified expanded graphite/electrostatically spun fiber network structure for solar thermal energy conversion

To enhance the application range of flexible films, it is crucial to rationally design composite films with high stretchability, excellent thermal conductivity, and water resistance. Flexible composite films with nanocellulose (CNF)-modified expanded graphite and spun fibers loaded with phase change materials as the backbone were obtained by electrospinning method. The prepared materials were characterized by good tensile properties (328.32%), high latent heat (107.0 J/g), good thermal stability, high photo-thermal conversion efficiency, good reusability, flame retardant properties, UV resistance and visible light absorption properties. What's more, the performance of the flexible composite membrane is adjustable. The prepared flexible composite membranes are promising in the fields of solar thermal energy conversion, wearable flexible materials and renewable energy utilization.

Metal-organic framework (MOF) dispersion based fluids for solar-thermal energy conversion

This paper discusses the potential use of metal–organic framework (MOF) dispersion based fluids for solar-to-thermal energy conversion (STEC). For this, the optical and thermal characteristics of MOF dispersion were investigated, with MOFs dispersed in ethylene glycol (EG). This study is focused on three different MOF dispersions, namely ZIF8/EG, CuBTC/EG, and FeBTC/EG, each with varying concentrations of MOF particles. The results showed that FeBTC/EG at a concentration of 0.3 wt% is the optimal fluid for STEC, exhibiting the highest absorption and STEC efficiency compared to the other two fluids. The study also highlights the trade-off between STEC efficiency and cost, as increasing the concentration of MOF particles decreases the specific absorption rate (SAR). Additionally, the paper evaluates the dispersion stability of FeBTC/EG over time, which is critical for practical STEC applications. The novelty of the paper lies in the use of MOF dispersion based fluids for STEC application, which has not been extensively studied before. This study provides valuable insights into the potential use of MOF/EG for STEC and highlights the importance of optimizing the concentration of MOF particles for efficient and cost-effective performance. This study also introduces the novel application of MOF dispersion based fluids for enhanced STEC performance, showcasing FeBTC/EG as a standout for its high efficiency and stability. It marks a significant stride in utilizing MOF materials for sustainable energy, emphasizing practical considerations of dispersion stability and cost-effectiveness in STEC systems.

A high-temperature solar selective absorber based on one-dimensional multilayer nanostructures

Selective absorbers play a crucial role in harvesting solar energy and realizing effective solar-thermal energy conversion in concentrated solar power systems and thermophotovoltaic systems. This study focuses on obtaining a high-temperature solar selective absorber which can well balance its thermal performance as well as structural complexity. Based on this, a selective absorber with simple one-dimensional multilayer nanostructures is designed to adapt to the high-temperature operation environments. The obtained absorber exhibits a total solar absorptance of 0.9504 to the AM1.5 solar radiation. Taking into account the infrared radiation loss, the solar-thermal efficiency of the absorber is found to be 91.2% under 1000 suns at 1273 K, and the total emittance is 0.1504 at the corresponding temperature. The absorber shows high insensitivity to both incident polarization angles and wide-angle incidence. Analysis of impedance and electromagnetic field distribution indicates that the selective absorption performance of the absorber is attributed to its impedance matching properties, resulting from the coupling effect of surface plasmon polaritons and magnetic polaritons.

Mathematical analysis of the solar assisted thermoelectric generator

The direct conversion of solar energy into electrical energy is primarily dependent on the photovoltaic systems. However, in the last few decades, researchers have shown interest to work on the thermoelectric modules for direct conversion of solar thermal energy into electrical energy based on the Seebeck effect. This research paper provides a comprehensive analysis of various Solar Thermoelectric Generator (STEG) designs, focusing on their conversion efficiencies. Despite the comparatively lower efficiency of STEG in comparison to photovoltaic (PV) cells, owing to limitations in the figure of merit value and temperature differences between hot and cold sides of the thermoelectric modules, this study proposes strategies for enhancement. Approaches include the development of materials with higher figure of merit values, design optimization, solar tracking, heat storage systems, and efficient heat sink designs. Also, Mathematical analysis of the power and efficiency calculation of a STEG has been presented on the basis of some fundamental and derived mathematical equations. The overall efficiency of STEG, a product of Opto-thermal Efficiency and thermoelectric module efficiency, is explored, identifying an optimal hot side temperature for maximum efficiency. Module mismatch analyses for series and parallel connections are also derived, underscoring conditions for mitigating power loss. These findings serve as guidelines for designing more feasible and efficient STEG systems, with considerations for economic viability, sustainability and greenhouse gas reduction throughout the life cycle.

Economical and shape-stabilized hydrated salt/bagasse biomass-derived carbon phase change composite for thermal energy storage

Due to their high heat storage density, low cost, and non-inflammability, hydrated salts have significant potential for application in thermal energy storage for buildings. Hydrated salts, however, have a few drawbacks, including high supercooling degree, unstable shape, and phase separation. In general, materials such as graphite, aerogel, and foam metal are commonly used to provide support for hydrated salts in order to mitigate or eliminate their drawbacks. While these currently used supporting materials have expensive and complicated production procedures. In this study, we developed bagasse biomass-derived carbon (BBC) materials to obtain easily accessible, cost-effective, and environmentally friendly support materials. Using the high-temperature carbonization method, the bagasse made from biological waste displayed a highly oriented and stacked lamellar structure. This not only significantly lowered the cost but also made the storage of hydrated salts easier. A straightforward vacuum impregnation technique was used to create SSD-SC/BBC phase change composites (PCCs). In comparison to sodium sulfate decahydrate (SSD), the developed SSD-SC/BBC9 PCCs exhibited a higher thermal storage capacity of 161.5 J/g, along with an exceptionally low supercooling degree. They also demonstrated the higher thermal conductivity of 1.79 W·m−1·K−1, improved thermal reliability, and enhanced solar-thermal energy conversion ability. Compared to other support materials, the economic analysis using static and dynamic payback periods demonstrates that the utilization of biomass-derived carbon as a support material for phase change materials (PCMs) is cost-effective, with lower preparation costs and a shorter payback period. A simple, affordable, and environmentally friendly method for utilizing hydrated salts in thermal energy storage for buildings is provided by SSD-SC/BBC9 PCCs.

High latent heat phase change materials composites based on MXene/biomass-derived cellulose nanocrystalline aerogel for solar-thermal energy conversion and storage

In this study, novel tetradecylamine/MXene/cellulose nanocrystal composite phase change materials (TDA/MXene/CNC CPCMs) were prepared using a vacuum impregnation method. For the first time, lightweight MXene/CNC composite aerogel was employed as a support material in energy storage, with TDA serving as the phase change material. The latent heat of TDA/MXene/CNC CPCMs reached 221.5 J/g. Furthermore, the density of the MXene/CNC-2 composite aerogel was 0.0614 g/cm3, and its loading rate for TDA was as high as 90.6 wt%. Additionally, the thermal conductivity of TDA/MXene/CNC CPCM-5 was 0.491 W/(m·K), 1.87 times higher than that of pure TDA. The TDA/MXene/CNC CPCMs exhibited exceptional thermal stability up to 120 °C and maintained excellent shape stability at 60 °C. The composites exhibit a superior solar-thermal conversion ability with the conversion efficiency as high as 94.1%, The incorporation of MXene significantly enhances the photothermal conversion capability, providing an important avenue for the high-efficiency utilisation of solar energy.

A multifunctional switching bidirectional optical absorber based on a titanium nitride metamaterial.

In this paper, a novel type of tunable ultra-wide band and double-narrow band artificial electromagnetic absorption device is studied. This work uses a titanium nitride-titanium-tungsten (TiN-Ti-W) composite ring array, a TiN reflector layer, and a silver-titanium dioxide-silver (Ag-TiO2-Ag) three layer composite structure to prepare the absorption layer. The simulation results illustrate that the absorption rate can reach 96.6% when the absorption wavelength is 300-2800 nm. When the light source is backward incidence, ultra-narrow band absorption can occur at specific wavelengths of 465 nm and 932 nm. This proves that the absorber is in good agreement with the impedance matching theory. The research results of this work will provide a theoretical basis for the design and application of solar thermal energy conversion.

Shape-stabilized phase change materials based on polyvinyl alcohol/graphene hybrid aerogels for efficient solar-thermal energy conversion

Shape-stabilized phase change materials based on polyvinyl alcohol/graphene hybrid aerogels for efficient solar-thermal energy conversion

Novel composite phase change materials supported by oriented carbon fibers for solar thermal energy conversion and storage

Phase change materials (PCMs) have aroused significant interest as promising materials for solar thermal energy conversion and storage. However, the long-standing shortcomings of liquid leakage, low thermal conductivity, and weak solar absorptance limit their practical applications. Herein, novel composite phase change materials (CPCMs) with anisotropic heat conduction are manufactured by mixing continuous carbon fibers (CFs) and palmitic acid (PA)/olefin block copolymer (OBC) mixtures using pressure induction and vacuum treatment. Because the oriented CFs in the vertical direction can offer heat transfer channels inside the composites, the vertical and horizontal thermal conductivities of the CPCMs are 5.84 W·K−1·m−1 and 1.34 W·K−1·m−1, respectively, resulting in a relatively high anisotropic degree of 4.36. Furthermore, to improve the absorption of solar radiation for the composite, carbon black is applied to the upper surface of the CPCMs, achieving a high total solar absorptance of 0.966. Due to the combination of the high solar absorptance of the carbon black and the high vertical thermal conductivity within the composites, the CPCMs exhibit outstanding solar-to-thermal efficiencies of 87.54% ∼ 95.08% at 1– 3 kW·m−2. In addition, stability testing also confirms that the CPCMs have excellent leakage-proof properties, thermal stability, and cyclic stability for long-term utilization. This work can provide an efficient route to synthesize high-performance CPCMs for solar thermal applications.

Form-Stable Composite Phase Change Materials Based on Porous Copper-Graphene Heterostructures for Solar Thermal Energy Conversion and Storage.

Solar-thermal energy conversion and storage technology has attracted great interest in the past few decades. Phase change materials (PCMs), by storing and releasing solar energy, are able to effectively address the imbalance between energy supply and demand, but they still have the disadvantage of low thermal conductivity and leakage problems. In this work, new form-stable solar thermal storage materials by impregnating paraffin PCMs within porous copper-graphene (G-Cu) heterostructures were designed, which integrated high thermal conductivity, high solar energy absorption, and anti-leakage properties. In this new structure, graphene can directly absorb and store solar energy in the paraffin PCMs by means of phase change heat transfer. The porous structure provided good heat conduction, and the large surface area increased the loading capacity of solar thermal storage materials. The small pores and superhydrophobic surfaces of the modified porous G-Cu heterostructures effectively hindered the leakage issues during the phase change process. The experimental results exhibited that the thermal conductivity of the prepared form-stable PCM composites was up to 2.99 W/(m·K), and no leakage took place in the solar-thermal charging process. At last, we demonstrated that the PCM composites as an energy source were easily integrated with a thermoelectric chip to generate electric energy by absorbing and converting solar energy.

A Review on the Nanofluids-PCMs Integrated Solutions for Solar Thermal Heat Transfer Enhancement Purposes

The current review offers a critical survey on published studies concerning the simultaneous use of PCMs and nanofluids for solar thermal energy storage and conversion processes. Also, the main thermophysical properties of PCMs and nanofluids are discussed in detail. On one hand, the properties of these types of nanofluids are analyzed, as well as those of the general types of nanofluids, like the thermal conductivity and latent heat capacity. On the other hand, there are specific characteristics of PCMs like, for instance, the phase-change duration and the phase-change temperature. Moreover, the main improvement techniques in order for PCMs and nanofluids to be used in solar thermal applications are described in detail, including the inclusion of highly thermal conductive nanoparticles and other nanostructures in nano-enhanced PCMs and PCMs with extended surfaces, among others. Regarding those improvement techniques, it was found that, for instance, nanofluids can enhance the thermal conductivity of the base fluids by up to 100%. In addition, it was also reported that the simultaneous use of PCMs and nanofluids enhances the overall, thermal, and electrical efficiencies of solar thermal energy storage systems and photovoltaic-nano-enhanced PCM systems. Finally, the main limitations and guidelines are summarized for future research in the technological and research fields of nanofluids and PCMs.

Enhancing the thermal performance of polyethylene glycol phase change material with carbon-based fillers

New implementation of phase change materials (PCMs), such as Polyethylene Glycols (PEGs), can alleviate the overconsumption of natural resources and can also be applied in solar-thermal energy conversion applications due to their distinctive semi-crystalline structure. To further enhance the thermal properties of PCMs, carbon-based nanomaterials such as graphene nanoplatelets (GNPs) and milled carbon fibre (MCF) can be incorporated to fabricate PEG-based composites due to their high thermal conductivity. One of the possible drawbacks of the addition of carbon-based fillers is their aggregation at high loadings, leading to a possible reduction in the latent heat of PCM composites. Hence, this study explored the most appropriate loading level (5 wt.%) of carbon-based fillers with pristine PEGs to achieve optimal thermal performance. Specifically, PEG-based composites were synthesised with three fillers (GNPs, graphite and MCF) via a temperature-assisted ultrasonication method and rapid solidification. Then, Raman Spectroscopy was used to quantify the dispersion of fillers among the PEG matrices. The results showed that despite a 32.6 % reduction in enthalpy of fusion to 155.5 J g–1, the addition of 15 wt.% of MCF increased the thermal conductivity up to 0.67 W m–1 K–1, which was approximately 2.5 times higher than that of pristine PEG. Moreover, explanations were provided on the possible heat transfer mechanisms in different types of carbon-based fillers. PEG/MCF PCMs displayed good properties on latent heat, thermal conductivity, aggregation prohibition, volumetric heat capacity, phase change temperature and thermal stability, while PEG/graphite composites exhibited excellent performance on thermal diffusivity, phase change (melting) temperature, specific heat capacity and cyclability.

One-Step Synthesis of Multifunctional Bacterial Cellulose Film-Based Phase Change Materials with Cross-Linked Network Structure for Solar-Thermal Energy Conversion, Storage, and Utilization.

As one of the important directions of solar energy utilization, the construction of composite photothermal phase change materials (PCM) with reasonable network support and low leakage in the simple method is important to solve the transient availability of solar energy and achieve long-lasting energy output. Here, a multifunctional silylated bacterial cellulose (BC)/hydroxylated carbon nanotube (HCNT)/polyethylene glycol (PEG) (SBTP) photothermal film-based PCM with cross-linked network structure is prepared by simple one-step synthesis. The formation of the cross-linked network structure achieves the enhancement of BC support network, prominent dispersion of HCNT and the direct introduction and perfect interlocking of PEG. Therefore, the optimal SBTP film exhibits high thermal enthalpy of 145.1Jg-1, enthalpy efficiency of over 94%, robust shape stability and low leakage of <1.2%. It also displays high photothermal conversion of over 80°C, photothermal storage of 394 sg-1 and excellent stability. Thus, it can demonstrate a maximum output voltage of 423mV and high power density of 30.26Wm-2 under three solar irradiations when applied in the solar-thermal-electric energy conversion field. Meanwhile, it also can apply in the thermal management of solar cell and light-emitting diode (LED) chip, and convert the waste heat into electricity, demonstrating multi-scene application capability.

Peak-like three-dimensional CoFe2O4/carbon nanotube decorated bamboo fabrics for simultaneous solar-thermal evaporation of water and photocatalytic degradation of bisphenol A

Catalytic CoFe2O4 and solar-thermal carbon nanotube decorated bamboo fabrics (CCBF) are fabricated for integrating efficient solar steam generation from wastewater with catalytic degradation of its organic contaminants. Thanks to the numerous porous channels and polar groups of bamboo fabric and the efficient solar-thermal energy conversion of black carbon nanotubes, the porous and hydrophilic CCBF exhibits fast upward transport of water, efficient solar light absorption, and high solar-thermal energy conversion efficiency. The decorated CoFe2O4 not only enhances the solar-thermal energy conversion efficiency of CCBF but also activates potassium peroxymonosulfate to generate abundant highly active species for catalytic degradation of bisphenol A (BPA). Furthermore, folding the CCBF into a peak-like 3D evaporator can enhance solar energy utilization, and gain environmental energy for promoting solar-thermal water evaporation and catalytic degradation performances. The 3D CCBF evaporator achieves a water evaporation rate of 2.72 kg m–2 h–1 under 1-sun irradiation. Meanwhile, 100% of the BPA in the seawater can be degraded within 10 min. An exceptional high purification efficiency of 27.72 kg m–2 h–1 is achieved with the 3D evaporator during a long-term treatment of BPA-containing seawater under 1-sun irradiation. This work demonstrates efficient purification of seawater/wastewater with both metal ions and organic pollutants by simultaneous solar-thermal evaporation of water and catalytic degradation of organic pollutants.

Biomass-Based Shape-Stabilized Composite Phase-Change Materials with High Solar-Thermal Conversion Efficiency for Thermal Energy Storage.

To alleviate the increasing energy crisis and achieve energy saving and consumption reduction in building materials, preparing shape-stabilized phase-change materials using bio-porous carbon materials from renewable organic waste to building envelope materials is an effective strategy. In this work, pine cone porous biomass carbon (PCC) was prepared via a chemical activation method using renewable biomaterial pine cone as a precursor and potassium hydroxide (KOH) as an activator. Polyethylene glycol (PEG) and octadecane (OD) were loaded into PCC using the vacuum impregnation method to prepare polyethylene glycol/pine cone porous biomass carbon (PEG/PCC) and octadecane/pine cone porous biomass carbon (OD/PCC) shape-stabilized phase-change materials. PCCs with a high specific surface area and pore volume were obtained by adjusting the calcination temperature and amount of KOH, which was shown as a caterpillar-like and block morphology. The shape-stabilized PEG/PCC and OD/PCC composites showed high phase-change enthalpies of 144.3 J/g and 162.3 J/g, and the solar-thermal energy conversion efficiencies of the PEG/PCC and OD/PCC reached 79.9% and 84.8%, respectively. The effects of the contents of PEG/PCC and OD/PCC on the temperature-controlling capability of rigid polyurethane foam composites were further investigated. The results showed that the temperature-regulating and temperature-controlling capabilities of the energy-storing rigid polyurethane foam composites were gradually enhanced with an increase in the phase-change material content, and there was a significant thermostatic plateau in energy absorption at 25 °C and energy release at 10 °C, which decreased the energy consumption.

Influence of the oxidation on the optical properties of Mo-Si-Ti, Ta-Mo-Cr-Al and Ta-Mo-Cr-Ti-Al alloys

Three refractory element-based alloys were oxidized for 6 h at 1100 °C in air inside a muffle furnace and the way the oxidation, especially through the evolution of the surface composition and roughness, affects the optical properties of these materials is discussed here. The ternary Mo-20.0Si-52.8Ti (at%) serves as an example of Mo-based alloys, while the equimolar Ta-Mo-Cr-Al (TMCA) and Ta-Mo-Cr-Ti-Al (TMCTA) are typical of the class of oxidation-resistant refractory compositionally complex alloys. The normal spectral emissivity of these three samples was increased due to the oxidation process. Oxidized TMCA and TMCTA exhibit a solar absorptivity higher than that of state-of-the-art Ni-based alloys used for solar receivers in concentrated solar power plants. Thus, the two refractory compositionally complex alloys are considered promising candidates for solar thermal energy conversion application.