Solar Thermal Conversion Efficiency Research Articles

Comparative Numerical Energy and Performance Analysis of Solar Photovoltaic and Solar Thermal Power Generation

This study analyses fixed and tracking solar photovoltaics and, solar thermal power. Performance in different locations was analysed for each configuration and technology using simulations based on a Typical Meteorological Year data. The study analysed a 25MWp solar photovoltaic and solar thermal power plants in each of the eleven selected locations in Zimbabwe. The performance of the solar photovoltaic and solar thermal power plants under different meteorological variables were assessed for all the selected locations. It was shown that different configurations together with different technologies have different conversion efficiencies. A high solar thermal conversion efficiency was found to be 18.718% in Gweru while it was 15.502% for solar photovoltaics in Mutare. The study also showed that highest insolation and clearness index values were found in Gweru. The average energy generated by the fixed photovoltaic collectors, tracking photovoltaic collectors and the Concentrating Solar Power plant were respectively 47.38GWh, 68.18GWh and 192.86GWh. There was a maximum percentage difference in the LCoE generated of 32.03% between the fixed PV collectors and the Concentrating Solar Power plant and a difference of 4.74% was realised between the tracking photovoltaics and Concentration Solar Power.

Novel cellulose-based films with highly efficient photothermal performance for sustainable solar evaporation and solar-thermal power generation

Solar-driven interfacial evaporation has received substantial attention in a variety of applications, including water purification, seawater desalination, and energy production. However, creating a straightforward, adaptable, and scalable method for correctly integrating hybrid solar-thermal systems continues to be a challenging task. Herein, we propose an economical, scalable, and environmentally friendly approach for achieving synergistic coupling of interfacial solar energy conversion for evaporation and low-grade thermal energy conversion to electricity by incorporating zinc oxide (ZnO) nanoparticle-modified MXene (ZNM- MXene) into cellulose nanofiber (CNF) films. The vacuum filtering approach produces CNF@ZNM-MXene composite films with enhanced photothermal conversion efficiency, capillary hydrophilicity, and thermal localization. Because of its rapid water transport capability, excellent sunlight absorption, and efficient solar-thermal conversion under 1 kW m−2 irradiance, the CNF@ZNM-MXene solar evaporator's evaporation rate reaches 1.27 kg m−2 h−1, and the solar-vapor conversion efficiency is as high as 82.15%, outperforming most previously reported solar evaporators. Moreover, when compared to a standalone thermoelectric (TE) module, the output power of the solar thermal conversion system coupled with a CNF@ZNM-MXene composite films and a TE module is boosted by 15.32 times. This work offers a practical and effective method for simultaneously capturing solar energy and desalinating saltwater.

Novel MoS2/montmorillonite hybrid aerogel encapsulated PEG as composite phase change materials with superior solar-thermal energy harvesting and storage

Phase change materials (PCMs) offer significant advantages in energy conversion and storage by facilitating the storage and release of thermal energy during phase transition processes. However, challenges such as leakage during PCM phase transitions and poor light absorption properties have constrained their application in the field of photothermal energy storage. In this study, Montmorillonite (Mt) and molybdenum disulfide (MoS2) has been used to design and synthesize hybrid aerogels (MoS2/Mt) boasting high mechanical strength and excellent photothermal conversion performance. These aerogels are then used to encapsulate polyethylene glycol (PEG) to prepare composite PCMs with outstanding solar-thermal conversion and storage performances. The results show that the synthesized MoS2/Mt-PEG composite PCMs exhibit high enthalpies of melting and solidification of 169.16 J/g and 170.78 J/g, respectively, while the aerogel supporting material has a high compressive modulus of 1.96 MPa. Moreover, the composite material displayed excellent thermal stability and leakage resistance after undergoing 30 melting-cooling cycles. Furthermore, the incorporation of MoS2 imparted outstanding light absorption properties to the MoS2/Mt-PEG composite, resulting in a high light absorption and photothermal conversion-storage efficiency of 93.4 % and 96.47 %, respectively. Synthesized composite PCMs also demonstrate outstanding performance in solar-thermal-electricity conversion, achieving a voltage output of 458 mV under illumination conditions and maintaining a sustainable voltage output even after removing the light source. Thus, the composite PCMs prepared in this work can meet the requirements of high enthalpy, effective leakage prevention, efficient solar-thermal conversion and solar-thermal-electricity conversion performance, thereby presenting potential applications in practical solar energy collection, conversion, and storage.

Ultrastrong and Reusable Solar‒Thermal‒Electric Generators by Economical Starch Vitrimers.

In frigid regions, it is imperative to possess functionality materials that are ultrastrong, reusable, and economical, providing self-generated heat and electricity. One promising solution is a solar‒thermal‒electric (STE) generator, composed of solar‒thermal conversion phase change composites (PCCs) and temperature-difference power-generation-sheets. However, the existing PCCs face challenges with conflicting requirements for solar‒thermal conversion efficiency and mechanical robustness, mainly due to monotonous functionalized aerogel framework. Herein, a novel starch vitrimer aerogel is proposed that incorporates orientational distributed carboxylated carbon nanotubes (CCNT) to create PCC. This innovative design integrates large through-holes, mechanical robustness, and superior solar‒thermal conversion. Remarkably, PCC with only 0.8 wt.% CCNT loading achieves 85.8MPa compressive strength, 102.4°C at 200mW cm-2 irradiation with an impressive 92.9% solar-thermal conversion efficiency. Noteworthy, the STE generator assembled with PCC harvests 99.1W m-2 output power density, surpassing other reported STE generators. Strikingly, even under harsh conditions of -10°C and 10mW cm‒2 irradiation, the STE generator maintains 20°C for PCC with 325mV output voltage and 45mA current, showcasing enhanced electricity generation in colder environments. This study introduces a groundbreaking STE generator, paving the way for self-sufficient heat and electricity supply in cold regions.

The Influence of Light-Generated Radicals for Highly Efficient Solar-Thermal Conversion in an Ultra-Stable 2D Metal-Organic Assembly.

Solar-thermal water evaporation is a promising strategy for clean water production, which needs the development of solar-thermal conversion materials with both high efficiency and high stability. Herein, we reported an ultra-stable cobalt(II)-organic assembly NKU-123 with light-generated radicals, exhibiting superior photothermal conversion efficiency and high stability. Under the irradiation of 808 nm light, the temperature of NKU-123 rapidly increases from 25.5 to 215.1 °C in 6 seconds. The solar water evaporator based on NKU-123 achieves a high solar-thermal water evaporation rate of 1.442 and 1.299 kg m-2 h-1 under 1-sun irradiation with a water evaporation efficiency of 97.8 and 87.9 % for pure water and seawater, respectively. A detailed mechanism study revealed that the formation of light-generated radicals leads to an increase of spin density of NKU-123 for enhancing the photothermal effect, which provides insights into the design of highly efficient photothermal materials.

Multistimuli-Responsive Shape-Memory Composites with a Water-Assisted Self-Healing Function Based on Sodium Carboxymethyl Cellulose/Poly(vinyl alcohol)/MXene.

Recent advancements in artificial intelligence have propelled the development of shape-memory polymers (SMPs) with sophisticated, environment-sensitive capabilities. Despite the progress, most of the existing SMPs are limited to responding to a single stimulus and show poor functionality, which has severely hindered their future applications. Herein, we report a high-performance multistimuli-responsive shape-memory and self-healing composite film fabricated by embedding MXene nanosheets into a conventional shape-memory sodium carboxymethyl cellulose (CMC) and poly(vinyl alcohol) (PVA) matrix. The incorporation of photothermal MXene nanosheets not only enhances the composite films' mechanical strength but also provides efficient solar-thermal conversion and robust light-actuated shape-memory properties. The resultant composite films exhibit an exceptional shape-memory response to various stimuli including heat, light, and water. Meanwhile, the interfacial interactions can be modulated by adjusting the MXene content, thereby enabling precise manipulation of the shape-memory performance. Moreover, thanks to the intrinsic hydrophilicity of the components and the unique physically cross-linked network, the composite films also demonstrate an effective water-assisted self-healing capability with an impressive healing efficiency of 85.7%. This work offers insights into the development of multifunctional, multistimuli-responsive shape-memory composites, opening up new possibilities for future applications in smart technologies.

Manipulation of the Self-Assembly Morphology by Side-Chain Engineering of Quinoxaline-Substituted Organic Photothermal Molecules for Highly Efficient Solar-Thermal Conversion and Applications.

Organic photothermal materials have attracted increasing attention because of their structural diversity, flexibility, and compatibility. However, their energy conversion efficiency is limited owing to the narrow absorption spectrum, strong reflection/transmittance, and insufficient nonradiative decay. In this study, two quinoxaline-based D-A-D-A-D-type molecules with ethyl (BQE) or carboxylate (BQC) substituents were synthesized. Strong intramolecular charge transfer provided both molecules with a broad absorption range of 350-1000 nm. In addition, the high reorganization energy and weak molecular packing of BQE resulted in efficient nonradiative decay. More importantly, the self-assembly of BQE leads to a textured surface and enhances the light-trapping efficiency with significantly reduced light reflection/transmittance. Consequently, BQE achieved an impressive solar-thermal conversion efficiency of 18.16 % under 1.0 kW m-2 irradiation with good photobleaching resistance. Based on this knowledge, the water evaporation rate of 1.2 kg m-2 h-1 was attained for the BQE-based interfacial evaporation device with an efficiency of 83 % under 1.0 kW m-2 simulated sunlight. Finally, the synergetic integration of solar-steam and thermoelectric co-generation devices based on BQE was realized without significantly sacrificing solar-steam efficiency. This underscores the practical applications of BQE-based technology in effectively harnessing photothermal energy. This study provides new insights into the molecular design for enhancing light-trapping management by molecular self-assembly, paving the way for photothermal-driven applications of organic photothermal materials.

A Metastructure Based on Amorphous Carbon for High Efficiency and Selective Solar Absorption.

Efficient solar thermal conversion is crucial for renewable clean energy technologies such as solar thermal power generation, solar thermophotovoltaic and seawater desalination. To maximize solar energy conversion efficiency, a solar selective absorber with tailored absorption properties designed for solar applications is indispensable. In this study, we propose a broadband selective absorber based on amorphous carbon (a-C) metamaterials that achieves high absorption in the ultraviolet (UV), visible (Vis) and near-infrared (NIR) spectral ranges. Additionally, through metal doping, the optical properties of carbon matrix materials can be modulated. We introduce Ti@a-C thin film into the nanostructure to enhance light absorption across most of the solar spectrum, particularly in the NIR wavelength band, which is essential for improving energy utilization. The impressive solar absorptivity and photothermal conversion efficiency reach 97.8% and 95.6%, respectively. Notably, these superior performances are well-maintained even at large incident angles with different polarized states. These findings open new avenues for the application of a-C matrix materials, especially in fields related to solar energy harvesting.

Phase change materials encapsulated in a novel hybrid carbon skeleton for high-efficiency solar-thermal conversion and energy storage

Phase change materials (PCMs) with high energy density and stationary transition temperature are now considered promising solar energy storage mediums. However, their intrinsic poor light absorption, thermal conductivity and stability severely impede their potential applications. In this study, a novel carbonized hybrid aerogel (CHA) structure was firstly constructed by incorporating MXene and carbon nanofibers (CNFs) into a continuous phase polyamic acid salt (PAAS) aqueous solution, followed by directional freezing, vacuum drying, imidization, and carbonization processes. Finally, the composite PCMs (CPCMs) were fabricated by vacuum impregnation of PCMs into the CHAs. The CPCM, of which CHA consists of 20 wt% MXene and 10 wt% CNF@PDA, demonstrates high solar-thermal conversion efficiency (>91 %), improved thermal conductivity of 0.40 W·m−1·K−1, great thermal stability (enthalpy loss < 0.19 % after 100 cycling tests with no obvious leakage). The introduction of MXene and CNFs endows PCM with broader light absorption spectrum range. The skeleton matrix embedded with bonded MXene sheets and CNFs provides more thermal pathways, light absorption sites and carrying capacity, improves the thermal conductivity, solar-thermal conversion property and stability of PCM. In addition, CPCM also exhibits outstanding EMI SE (95 dB). The multifunctional and high-performance CPCMs shows potential to realize the effective capture and utilization of solar energy. This work provides a new strategy to construct stable and multifunctional hybrid carbon skeleton for high-efficiency solar-thermal conversion and energy storage.

Anisotropic Rotunda-Shaped Carboxymethylcellulose/Carbon Nanotube Aerogels Supported Phase Change Materials for Efficient Solar-Thermal Energy Conversion.

For the drawbacks of phase change materials such as poor shape stability and weak solar-thermal conversion ability, a rotunda-shaped carboxymethylcellulose/carbon nanotube aerogel (CA) with three-dimensional network was constructed by freeze casting with a special mold, and then impregnated with polyethylene glycol (PEG) in this work. The PEG/CA had an enthalpy of 183.21 J/g, and a thermal conductivity of 0.324 W m-1 K-1, which was 57 % higher than the pure PEG. The ability of PEG/CA to convert solar energy to thermal energy was a positive correlation between the inclusion of CNTs and the composite material's thermal conductivity. Under simulated sunlight, its solar-thermal conversion efficiency reaches 94.41 %, and after 10 min of irradiation, the surface temperature can reach 65 °C and the internal temperature can reach 44.67 °C. This rotunda-shaped PEG/CA is promising for the efficient use of renewable solar energy due to its strong solar-thermal conversion and thermal storage capabilities.

Anisotropic MXene/Poly(vinyl alcohol) Composite Hydrogels with Vertically Oriented Channels and Modulated Surface Topography for Efficient Solar-Driven Water Evaporation and Purification.

Hierarchical structure and surface topography play pivotal roles in developing high-performance solar-driven evaporators for clean water production; however, there exists a notable gap in research addressing simultaneous modulation of internal microstructure and surface topography in hydrogels to enhance both solar steam generation performance and desalination efficiency. Herein, anisotropic poly(vinyl alcohol)/MXene composite hydrogels for efficient solar-driven water evaporation and wastewater purification are fabricated using a template-assisted directional freezing approach followed by precise surface wettability modulation. The resultant composite hydrogels exhibit vertically oriented channels that ensure fast water supply during evaporation, and their poly(vinyl alcohol) skeletons can reduce the vaporization enthalpy of the water in the hydrogels. The incorporation of MXene sheets enables efficient solar light absorption and solar-thermal conversion while providing structural reinforcement to the hydrogels. More importantly, the as-created undulating solar-thermal surface, featuring modulated hydrophilic troughs and hydrophobic crests, significantly enhances solar-thermal conversion efficiency, thereby boosting solar evaporation performances. As a result, the fabricated hydrogel-based evaporator exhibits an impressive evaporation rate of 2.55 kg m-2 h-1 under 1 sun irradiation, coupled with long-term durability and desalination stability. Notably, the outstanding mechanical robustness of the hydrogel further enables high portability through a readily achievable process of reversible dehydration/hydration.

Anisotropic and hierarchical porous boron nitride/graphene aerogels supported phase change materials for efficient solar-thermal energy conversion

The formation of shape-stabilized composite phase change materials (CPCMs) with special structure is an efficient strategy to prevent the leakage of phase change materials (PCMs) and improve the solar-thermal conversion ability. In this work, graphene and boron nitride nanosheets (BBNS) were prepared by the magnesiothermic reduction SHS method in CO2 and N2 atmosphere, respectively. Then, an anisotropic and hierarchical porous boron nitride/graphene aerogel with three-dimensional network was constructed by directional ice-freezing method using carboxymethyl cellulose as supporting framework and adhesive, and polyethylene glycol (PEG) was impregnated to prepare novel CPCMs. The CPCMs had enthalpies of 150∼160 J/g, and a highest thermal conductivity of 0.390 W/(m·K), which was around 47% higher than that of pure PEG. The ability of the CPCMs to convert solar energy to thermal energy was significantly enhanced. Under a simulated light intensity of sunlight (100 mW/cm2), its solar-thermal conversion efficiency reaches 94.92%, and after 20 min of irradiation, the surface temperature can reach 72 °C. These CPCMs are promising for the efficient use of renewable solar energy due to their high solar-thermal conversion efficiency and thermal storage capabilities.

Waste to functions: Construction of a novel solar-thermal conversion material based on sludge-derived carbon dots via Ca-in-situ-functionalization for efficient solar-driven water evaporation

Solar interface water evaporator (SIWE) based on waste-derived carbon dots (CDs) are highly promising for large-scale production applications in the future, due to their low-cost, eco-friendly, and tunable structure and properties. However, there are still obstacles, including limited performance, blind selection of waste materials, and unknown underlying mechanisms between waste properties and the physicochemical properties of derived CDs. In this study, a novel CDs-based wooden SIWE derived from paper mill sludge (PMS) was constructed (called ESCDs-wood). Under 1 sun, ESCDs rapidly heated up from 15.6 °C to 53.5 °C and reached stability within 10 mins. The solar-thermal conversion efficiency of ESCDs was as high as 137.58 %, and the ESCDs-wood achieved a high evaporation rate of 2.94 kg m-2h−1. Moreover, the ESCDs-wood cost about $9 to complete 1 m2 evaporation. Meanwhile, the ESCDs-wood exhibited long-term stability, after 20 cycles, its solar-thermal conversion efficiency and water evaporation rate remained at 84.21 % and 85.03 % of the initial test, respectively. Moreover, the Ca-doping was found to be a key factor in effectively enhancing the solar-thermal conversion and the thermal stability of ESCDs, and the exact role of Ca-doping on the solar-thermal conversion performance enhancement of CDs was validated and revealed. Therefore, this study not only constructed a cost-effectiveness, high performance, sustainability, chemical-free, and eco-friendly SIWE, but also innovatively proposed the functionalization mechanism of Ca-doping for CDs and thus provided a new sight for the targeted regulation and design of CDs.

Unidirectionally Structured Magnetic Phase-Change Composite Based on Carbonized Polyimide/Kevlar Nanofiber Complex Aerogel for Boosting Solar-Thermo-Electric Energy Conversion.

To realize highly efficient solar-thermo-electric energy conversion for clean electricity power generation, we have developed a new type of unidirectionally structured magnetic phase-change composite comprising a carbonized polyimide (C-PI)/Kevlar nanofiber (KNF) complex aerogel as a 3D carbon skeleton porous supporting material, CoFe2O4 nanoparticles as a magnetic additive, polyethylene glycol (PEG) as a phase-change material, and polypyrrole as a photothermal absorption coating layer. The as-fabricated C-PI/KNF complex aerogel exhibits a unidirectional microstructure, high porosity, robust skeleton frame, ultralight weight, and high thermal conductance. Featured with such unique structure and characteristics, the complex aerogel can offer an effective heat and electron transfer method to ensure highly efficient solar-thermal conversion and photothermal energy storage of the developed composite. The developed composite exhibits a high latent heat capacity of over 150 J g-1, outstanding shape stability along with a low leakage of 0.2 wt %, good thermal cycling stability, and high photothermal conversion efficiency of 84.8%. Based on the Seebeck effect, a solar thermoelectric generation system (STEGS) was constructed with the hot side coupled with the developed composite and the cold side immersed in air and ice water. Under 2.0 kW m-2 solar irradiation, the developed STEGS in ice water obtained maximum output voltage and current of 259.7 mV and 27.1 mA, respectively, which are significantly higher than those in air. The output power of the developed STEGS in an ice water environment is 50.6% higher than that in air under 4.0 kW m-2 solar irradiation. More importantly, the developed STEGS in ice water continuously generated output voltage and current for about 810 s without solar irradiation thanks to the latent heat release by the PEG component within the developed composite. In addition, the introduction of magnetic CoFe2O4 can accelerate solar-thermal conversion through periodic electron motion by the Néel relaxation or Brownian relaxation. This resulted in an increase in the maximum output voltage and current by 13.7 and 11.5%, respectively, under an alternating magnetic field as a result of the magnetism-accelerated solar-thermo-electric conversion. This study offers an innovative approach for developing PCM-based advanced functional materials for solar energy utilization in clean and sustainable electricity generation.

Preparation of solid-solid phase change composites and their solar-interfacial water evaporation performance

Solar powered interfacial evaporation materials are widely used in seawater desalination. But solar energy is intermittent. To solve this problem, researchers combined phase change materials (PCMs) with interfacial evaporation materials. Many PCMs are loaded into the interface evaporation matrix material through physical blending, which may cause leakage problems during long-term use, leading to secondary water pollution. We have developed a novel interfacial evaporation material that continuously and efficiently vaporizes clean water under intermittent sunlight to address these issues. The solid-solid PCMs (BC/PVA/GO-g-LA-SSPCMs) were obtained by chemical grafting of PCMs lauric acid (LA) and graphene oxide (GO), and the substrate material bacterial fibrin (BC) was modified by polyvinyl alcohol (PVA). The material achieved light absorption of 88.8% in the full spectrum range. Under 1 kW m−2 light, the evaporation rate reaches 3.4 kg m−2h−1, and the solar-thermal conversion efficiency is 94.2%. In the dark, the evaporation rate is 1.05 kg m−2h−1, and the solar-thermal conversion efficiency is 49.5%. 15 light-dark cycle experiments and harsh environments (high concentration brine, acidic solution, alkaline solution, dye wastewater) showed high efficiency and stable evaporation performance. The material cost of the evaporator is about 0.98 USD·m−2, and the solar-thermal quality factor is 4.64, which is higher than that of most reported materials. In short, BC/PVA/GO-g-LA-SSPCMs provides a new idea for the future design and development of solar-thermal conversion materials to achieve efficient and continuous saltwater desalination and wastewater purification under intermittent solar-irradiation.

An ultra-high-temperature cavity receiver with a simple flat absorber for safe and efficient solar-thermal conversion

Improving the operating temperature to >1573 K is promising to enhance the generating efficiency of solar thermal power. However, such extremely ultra-high temperature inevitably brings severe challenges to solar-thermal conversion. Therefore, a cavity receiver with a simple flat absorber was designed and optimized in this study. Firstly, the receiver cavity was designed to be made of machinable insulation material, and its crucial absorbing surface was a flat absorber assembled from individual tungsten panels to simplify the structure. Then, an optical-thermal-mechanical model was established to identify the suggested configuration. It was found the partially coated receiver with a 130-mm-depth cavity and a down-in flow pattern can operate safely and efficiently under ultra-high temperatures, which was regarded as the optimized design. Finally, the performance of the optimized receiver was evaluated when the mass flow rate was within 22.0–32.0 g·s−1 and the inlet temperature was within 623∼873 K. The results indicated the highest outlet temperature reached 1579.2 K with receiver efficiency ranging from 69.9%–80.8%. Additionally, the maximum thermal losses from the glass and the insulation reached 860.2 W and 365.9 W, respectively, pointing out the crucial adiabatic directions for ultra-high-temperature receivers. The obtained results can offer promising insights to ultra-high-temperature solar receivers.

Experimental investigation of Cu@C core-shell nanoparticle suspensions for highly efficient solar-thermal conversion

The choice of working medium plays a pivotal role in achieving efficient solar-thermal utilization. Nanoparticle suspensions, due to their superior optical and thermal properties, emerge as promising candidates. However, their widespread use is hindered by high costs and a limited absorption bandwidth. In this study, Cu@C core-shell nanoparticles (NPs) were prepared through an experimental process, employing a straightforward in situ polymerization method followed by high-temperature carbonization. Finite element calculations reveals that the solar absorption power of Cu@C NPs surpasses that of C NPs and Cu NPs by 57.2 % and 22.9 %, respectively. This enhancement is attributed to the synergistic coupling between the localized surface plasmon resonance (LSPR) of the Cu core and the robust intrinsic absorption of the C shell. Under 1-sun illumination intensity, experimental findings show that the solar-thermal conversion efficiency (η) of the Cu@C nanoparticle suspension, with a mass fraction of 100 ppm, attains approximately 93 %, tripling that of the water base-fluid (∼31 %). Moreover, both η and the temperature profile exhibit negligible variations under different solar intensities and after repeated heating and cooling cycles, indicating the exceptional stability of the suspensions. These results suggest that Cu@C nanoparticle suspensions present a dependable and efficient solution for solar-thermal applications.

Honeycomb-like porous copper with pleated surface for supporting phase change material with enhanced thermal conductivity and solar thermal storage performance

Paraffin wax (PW) is concerned in the field of thermal storage because of its high thermal storage density, but it generally has problems such as low thermal conductivity, poor shape stability, and low solar absorption, which limit its application in solar thermal storage and thermal management. In this study, a honeycomb-like 3D porous Cu skeleton with a pleated surface was prepared by the salt template method, and the phase change composites (PCCs) were prepared using this 3D thermal conductive skeleton to support PW. The honeycomb-like porous structure with pleated surface has positive effects on the shape stability and solar-thermal conversion of PW. The thermal conductivity, leakage resistance, and solar-thermal conversion efficiency of the PCCs were significantly improved. Among them, the thermal conductivity of PW@PSHCPC2 reached 3.3 Wm−1 K−1, which was 16.5 times higher than that of PW, and the solar-thermal conversion efficiency reached 89.2 %, and a stable current of 61.8 mA was generated in the solar thermal power generation experiment. These results show that these PCCs have great potential for applications in several fields such as solar thermal storage, waste heat recovery, solar power generation, and electronic thermal management.

Ultra-broadband high-efficiency solar absorber based on Ti-GaAs-Au structure for UV to near-infrared spectral range

In this study, we propose an ultra-broadband solar absorber composed of a trapezoidal base, an outer circular ring, and four nano-cylinders. The absorber has a covered bandwidth range of 300–4000 nm and a temperature range of 373–973 K. The average absorptance within the mentioned wavelength range is over 96.52%, and the efficiency of solar energy thermal conversion is above 0.9 at 373–973 K under a solar concentration factor of 1000, with a maximum efficiency of 0.9644. Analysis of its absorption mechanism using the finite-difference time-domain method indicates that the proposed solar absorber’s outstanding absorption performance is due to the excitation of surface plasmon polaritons, localized surface plasmon resonances, and cavity resonances enhanced electromagnetic fields. This result has also been validated by the impedance matching theory. Moreover, the proposed solar absorber exhibits insensitivity to different polarization angles and maintains a high absorption effect in the range of 0°–70° incidence angle. The designed solar absorber has potential applications in areas such as seawater purification, wastewater treatment, and steam power generation systems.

Wideband close perfect meta surface absorber for solar photovoltaic and optical spectrum applications

The leading research challenge is to develop a meta-surface absorber design for optimal performance across ultraviolet, visible, and near-infrared wavelengths. In ongoing research, a meta-surface absorber is being introduced, designed to achieve near-perfect absorption of 99% across the 250–2500 nm UV–Vis-NIR spectrum for both Transverse electric (TE) and Transverse magnetic (TM) polarized waves. The aimed design features a symmetrical resonator pattern, resulting in a polarization-insensitive absorption response. Additionally, the absorption response demonstrates robustness when altering the geometric parameters of the meta-surface unit cell. Precise simulation and modelling of the proposed meta-surface absorber are achieved by Employing a Finite Difference Frequency Domain (FDFD) solver, coupled with the Finite Integration Technique (FIT) and a tetrahedral mesh component. Verification of absorption characteristics is conducted through three frameworks: impedance matching, interference, and an equivalent circuit model. The suggested meta-structure design exhibits a uniform absorption response, as determined through considerations of impedance matching, interference theory, and the equivalent circuit theory. The PCR value is significantly lower than recent studies, reinforcing that the proposed meta-surface primarily serves as an absorber, not a polarization converter. The absorption response of the suggested meta-structure design remains consistent across the range of electromagnetic wave polarization angles from 0 to 90 for both TE and TM waves. Furthermore, the absorption response of the proposed design demonstrates stability up to an incident angle of 70 for electromagnetic waves. The distribution of electric and magnetic fields, along with surface current density on the proposed design, validates the existence of localized, propagating, and cavity surface plasmon resonance. These collectively create anti-parallel current flow, leading to the absorption of incident EM waves. Furthermore, the suggested design achieves a solar energy thermal conversion efficiency of 99% across the operational spectrum at a working temperature of 573 K, substantiating its potential for use as a solar absorber. Thus, this study presents a meta-structure unit cell that addresses the challenge with near-perfect absorption, polarization independence, and angle robustness. Applications include photodetection, thermal mapping, solar harvesting, and photo-trapping.