Soil Moisture Active Passive Mission Research Articles

Enhancing Soil Moisture Active–Passive Estimates with Soil Moisture Active–Passive Reflectometer Data Using Graph Signal Processing

The Soil Moisture Active–Passive (SMAP) mission has greatly contributed to the use of remote sensing technologies for monitoring the Earth’s land surface and estimating geophysical parameters that influence the climate system. Since the SMAP mission switched its radar receiver to allow the reception of Global Positioning System (GPS) signals, Global Navigation Satellite System Reflectometry (GNSS-R) configuration has been enabled, providing full polarimetric forward scattering measurements of the Earth’s surface, also known as SMAP Reflectometry or SMAP-R. Polarimetric GNSS-R is beneficial for sensing land surface properties, especially for more accurate estimations of soil moisture (SM) in densely vegetated areas. In this study, we explore the opportunity to enhance SMAP mission soil moisture estimates using reflected GNSS signals. We achieve this by interpolating the sparse reflectivity data with terrain information to disaggregate radiometer brightness temperatures. Our main objective is to present a novel algorithm based on Graph Signal Processing (GSP) that uses reflectometry data to enhance SMAP radiometer observations and ultimately improve SM retrievals. By implementing methods from the GSP field, we formulate the reflectivity interpolation problem as a signal reconstruction on a graph, where the weights of the edges between the nodes are chosen as a function of geophysical information. Subsequently, using the retrieved reflectivity maps, we increase the resolution of the brightness temperature data, leading to an improvement in the SM estimates. Initial findings indicate that our GSP method presents a promising alternative for analyzing sparse remote sensing observations, leveraging Earth’s surface geophysical information. This approach results in a notable improvement, with a reduced Root Mean Square Error (RMSE) of 11.8% compared to SMAP data and a reduction in unbiased RMSE (uRMSE) by 14.7% over vegetated areas.

Ocean Variability in the Costa Rica Thermal Dome Region from 2012 to 2021

Satellite ocean color and sea surface temperature (SST) observations from 2012 to 2021 and sea surface salinity (SSS) measurements from the Soil Moisture Active Passive (SMAP) mission from 2015 to 2021 are used to characterize and quantify the seasonal and interannual variability in the physical, optical, and biological sea surface features in the Costa Rica Thermal Dome (CRTD) region. High-resolution climatology and the seasonal variability in SST, SSS, and ocean color properties are produced. Chlorophyll-a (Chl-a) concentration, SST, and SSS show these three properties are linked with similar spatial patterns and seasonal variations, i.e., elevated Chl-a concentrations, match the depressed SST and increased SSS and vice versa. This reflects that the physical driving force is the same for these three ocean properties and implies that nutrient supply associated with the physical processes is the major driver for the seasonal biological variability. The interannual changes in Chl-a, SST, and SSS also show that these three ocean properties are consistent among themselves. The positive (negative) Chl-a anomaly generally occurs with negative (positive) SST anomaly and enhanced (reduced) SSS. The in situ measurements evidently show that the subsurface ocean dynamics in the upper 100 m controls the sea surface variability for Chl-a, SST, and SSS. We report that no significant enhancement of Chl-a is observed in the CRTD region during the central Pacific (CP)-type 2020–2021 La Niña event, while Chl-a changes are significant in the other three of four ENSO events between 2012 and 2021. Furthermore, the difference in Chl-a variability driven by the CP-type ENSO and eastern Pacific (EP)-type ENSO is further discussed.

Integration of Sentinel-1A Radar and SMAP Radiometer for Soil Moisture Retrieval over Vegetated Areas.

NASA's Soil Moisture Active Passive (SMAP) was originally designed to combine high-resolution active (radar) and coarse-resolution but highly sensitive passive (radiometer) L-band observations to achieve unprecedented spatial resolution and accuracy for soil moisture retrievals. However, shortly after SMAP was put into orbit, the radar component failed, and the high-resolution capability was lost. In this paper, the integration of an alternative radar sensor with the SMAP radiometer is proposed to enhance soil moisture retrieval capabilities over vegetated areas in the absence of the original high-resolution radar in the SMAP mission. ESA's Sentinel-1A C-band radar was used in this study to enhance the spatial resolution of the SMAP L-band radiometer and to improve soil moisture retrieval accuracy. To achieve this purpose, we downscaled the 9 km radiometer data of the SMAP to 1 km utilizing the Smoothing Filter-based Intensity Modulation (SFIM) method. An Artificial Neural Network (ANN) was then trained to exploit the synergy between the Sentinel-1A radar, SMAP radiometer, and the in situ-measured soil moisture. An analysis of the data obtained for a plant growing season over the Mississippi Delta showed that the VH-polarized Sentinel-1A radar data can yield a coefficient of correlation of 0.81 and serve as a complimentary source to the SMAP radiometer for more accurate and enhanced soil moisture prediction over agricultural fields.

Joint assimilation of satellite-based surface soil moisture and vegetation conditions into the Noah-MP land surface model

This study explores the potential of integrating satellite retrievals of surface soil moisture (SSM) and vegetation conditions into the Noah-MP land surface model. In total, five data assimilation (DA) experiments were carried out. One of the experiments only assimilates SSM retrievals from the Soil Moisture Active Passive mission, two experiments only assimilate retrievals of vegetation conditions: either optical retrievals of leaf area index (LAI) from the Copernicus Global Land Service, or X-band microwave-based retrievals of vegetation optical depth (VOD) from the Advanced Microwave Scanning Radiometer 2. Additionally, two joint DA experiments are performed, each incorporating SSM and one of the vegetation products. The DA experiments are compared with a model-only run, and all experiments are evaluated using independent ground reference data of soil moisture, evapotranspiration, net ecosystem exchange and gross primary production (GPP). Assimilating only SSM improves estimates of the soil moisture profile (median SSM anomaly correlation improves with 0.02 compared to a model-only run), whereas assimilating LAI predominantly improves GPP estimates (reduction in median RMSD of 0.024 gC m−2 day−1 compared to a model-only run). The joint assimilation of SSM and vegetation conditions captures both of these improvements in a single, physically consistent analysis product. The DA increments show that this combined setup allows one satellite product to compensate for potential degradations introduced into the system by the other product. Furthermore, the joint SSM and VOD DA experiment has the smallest ensemble spread in its estimates (21% reduction in SSM spread compared to a model-only run). Overall, our results underline the potential of multi-sensor and multivariate DA, in which information from different sources is combined to improve the estimates of several land surface states and fluxes simultaneously.

Improved sea surface salinity data for the Arctic Ocean derived from SMAP satellite data using machine learning approaches

Salinity is among the key climate characteristics of the World Ocean. During the last 15 years, sea surface salinity (SSS) is measured using satellite passive microwave sensors. Standard retrieving SSS algorithms from remote sensing data were developed and verified for the most typical temperature and salinity values of the World Ocean. However, they have far lower accuracy for the Arctic Ocean, especially its shelf areas, which are influenced by large river runoff and have low typical temperature and salinity values. In this study, an improved algorithm has been developed to retrieve SSS in the Arctic Ocean during ice-free season, based on Soil Moisture Active Passive (SMAP) mission data, and using machine learning approaches. Extensive database of in situ salinity measurements in the Russian Arctic seas collected during multiple field surveys is applied to train and validate the machine learning models. The error in SSS retrieval of the developed algorithm compared to the standard algorithm reduced from 3.15 to 2.15 psu, and the correlation with in situ data increased from 0.82 to 0.90. The obtained daily SSS fields are important to improve accurate assessment of spatial and temporal variability of large river plumes in the Arctic Ocean.

Spatial downscaling of SMAP radiometer soil moisture using radar data: Application of machine learning to the SMAPEx and SMAPVEX campaigns

This study developed a random forest approach for downscaling the coarse-resolution (36 km) soil moisture measured by The National Aeronautics and Space Administration (NASA) Soil Moisture Active Passive (SMAP) mission to 1 km spatial resolution, utilizing airborne remotely sensed data (radar backscatter and radiometer retrieved soil moisture), vegetation characteristics (normalized difference vegetation index), soil properties, topography, and ground soil moisture measurements from before the launch of SMAP for training a random forest model. The 36 km SMAP soil moisture product was then downscaled by the trained model to 1 km resolution using the information from SMAP. The downscaled soil moisture was evaluated using airborne retrieved soil moisture observations and ground soil moisture measurements. Considering the airborne retrieved soil moisture as a reference, the results demonstrated that the proposed random forest model could downscale the SMAP radiometer product to 1 km resolution with a correlation coefficient of 0.97, unbiased Root Mean Square Error of 0.048 m3 m−3 and bias of 0.016 m3 m−3. Accordingly, the downscaled soil moisture captured the spatial and temporal heterogeneity and demonstrated the potential of the proposed machine learning model for soil moisture downscaling.

Multiresolution soil moisture products based on a spatially adaptive estimation model and CYGNSS data

ABSTRACT The estimation of soil moisture (SM) utilizing the data from the Cyclone Global Navigation Satellite System (CYGNSS) has attracted significant interest in recent times. However, CYGNSS’ inherent capability of variable resolution has not been fully exploited, often resulting in a loss of detailed spatial information in the raw data. In this paper, a novel downscaling scheme tailored for CYGNSS data is introduced to yield a “self-adjusting adaptive resolution” SM product, which dynamically varies the resolution of SM estimates based on the available CYGNSS data resolution at different geographic locations. Initially, a direct quantitative relationship is established between the key CYGNSS parameters reflecting SM variations and the reference SM from the Soil Moisture Active Passive (SMAP) mission with a coarse resolution of 36 km. This model is then applied to CYGNSS observations with resolutions down to 3 km to generate high-resolution, self-adjusting SM estimates that better conserve the fine-scale information linked to the original CYGNSS data. Extensive experimental results with error ratio diagrams show that the advanced geographically weighted regression (GWR)-based SM estimation method outperforms other competing estimation models and better retains localized spatial relationships and patterns. This study underscores the potential of CYGNSS as a novel and robust independent data source capable of delivering fine-resolution SM estimations by harnessing its unique multiresolution observational capability.

First mapping of polarization-dependent vegetation optical depth and soil moisture from SMAP L-band radiometry

Soil moisture (SM) and vegetation optical depth (VOD) estimates using passive microwave remote sensing at L-band (1.4 GHz) are essential for attaining a better understanding of water exchanges at the land-atmosphere interface. However, current retrieval algorithms often ignore the polarization dependence of vegetation effects. This study proposed a parameter self-calibrating framework for the multi-channel collaborative algorithm (MCCA) and presented a new SM and the first polarization-dependent VOD product based on the dual-polarized L-band observations at a fixed angle (40°) from the NASA Soil Moisture Active Passive (SMAP) mission. The parameter self-calibrating framework utilizes an information theory-based approach to obtain surface roughness and effective scattering albedo globally. Furthermore, the MCCA does not require auxiliary data for vegetation or soil moisture to constrain the retrieval process. Comparison with other SM and VOD products, such as MT-DCA version 5, DCA, SCA-H, SCA-V from SMAP Level-3 products version 8, and SMAP-IB, demonstrate analogous spatial patterns. The MCCA-derived SM exhibits the lowest unbiased root mean square deviation (ubRMSD, about 0.055 m3/m3), followed by SMAP-IB and DCA (0.061 m3/m3), with an overall Pearson's correlation coefficient of 0.744 (SMAP-IB performed best with R = 0.764) when evaluated against in-situ observations from 18 dense soil moisture networks. The MCCA generates VOD values for both vertical and horizontal polarization, demonstrating a slight polarization difference of vegetation effect at the satellite scale. Both VODs exhibit a strong linear relationship with above-ground biomass and canopy height. The polarization difference of VODs is primarily observed in densely vegetated and arid areas.

Geospatial Analysis For Determination Of Preferential Soil Conditions For The Desert Locust Oviposition

Understanding the thresholds of influencing parameters that favor the habitability of dangerous pests like desert locusts (Schistocerca gregaria) can aid in early detection and eradication using control operations. The life cycle of the desert locust and its behavioral changes are associated with the weather patterns and the region’s ecosystem settings. This study attempts to retrieve the preferential soil conditions like texture and moisture at the surface and subsurface levels for egg-laying by desert locusts. Towards this, Locust Hub, a comprehensive database of desert locusts maintained and disseminated by the Food and Agriculture Organisation under the Locust Watch program, was used to identify breeding site locations for 2017-2021. In this research, we extracted sand-silt-clay percentage at these breeding sites using SoilGrids ver. 2.0 from the World Soil Information Service database facilitated by International Soil Reference and Information Centre. Similarly, soil moisture conditions extracted from Level-4 data products of the Soil Moisture Active Passive mission for all these breeding sites aided in essaying the optimal soil conditions for the desert locust’s oviposition. This study’s results confirm the sand percentage in a broad range of 55-70% (for 90% of samples), followed by a narrow range of silt and clay with 19-24% and ~14-20%, respectively. Our study reveals that female desert locusts prefer sandy loam-textured soils for oviposition. The preferred range of soil moisture at the surface and subsurface resulted in 5-10% and 10-20%, respectively. These results confirm that dampness is required at the surface soil for initiating the oviposition by female desert locusts. Results from this research can aid in the early identification of breeding grounds during desert locusts’ invasion period.

Mapping spatiotemporal soil moisture in highly heterogeneous agricultural landscapes using mobile dual‐spectra cosmic‐ray neutron sensing

AbstractAccurate large‐scale soil moisture (SM) maps are crucial for catchment‐scale hydrological models used for water resource management and warning systems for droughts, floods, and wildfires. SM can be mapped by mobile cosmic‐ray neutron (CRN) systems of moderated detectors at homogeneous landscapes of similar soil and vegetation. In this study, we present a new approach for mobile CRN detection to perform to its full potential, where CRN measurements can also be converted to SM at heterogeneous landscapes. The approach is based solely on thermal and epithermal neutron datasets obtained from mobile dual‐spectra CRN detection, combined with theoretical developments using a particle transport model. For each measurement point, the land cover type is identified using the thermal‐to‐epithermal (T/E) ratio, and the relevant neutron‐count‐to‐soil‐moisture conversion function is estimated from CRN stations located at the main land cover types in the catchment. With this approach, the requirement of collecting 100+ soil samples for each point along the survey route is omitted. We use this T/E‐dependent approach to obtain SM maps from 12 CRN surveys and compare it with a simple approach where only the conversion function from the agricultural site is used. SM by the simple approach is comparable to the estimates of the agricultural stations of a capacitance sensor network, while the estimates of the T/E‐dependent approach also compare well with the heathland and forest stations. With accurate SM estimates for all landcover types, the average error is reduced from 0.089 to 0.038 when comparing CRN SM with space‐borne Soil Moisture Active Passive Mission estimates.

IMERG Precipitation Improves the SMAP Level-4 Soil Moisture Product

Abstract The NASA Soil Moisture Active Passive (SMAP) mission Level-4 Soil Moisture (L4_SM) product provides global, 9-km resolution, 3-hourly surface and root-zone soil moisture from April 2015 to the present with a mean latency of 2.5 days from the time of observation. The L4_SM algorithm assimilates SMAP L-band (1.4 GHz) brightness temperature (Tb) observations into the NASA Catchment land surface model as the model is driven with observation-based precipitation. This paper describes and evaluates the use of satellite- and gauge-based precipitation from the NASA Integrated Multi-satellitE Retrievals for the Global Precipitation Measurement (IMERG) products in the L4_SM algorithm beginning with L4_SM Version 6. Specifically, IMERG is used in two ways: (i) The L4_SM precipitation reference climatology is primarily based on IMERG-Final (Version 06B) data, replacing the Global Precipitation Climatology Project Version 2.2 data used in previous L4_SM versions, and (ii) the precipitation forcing outside of North America and the high latitudes is corrected to match the daily totals from IMERG, replacing the gauge-only, daily product or uncorrected weather analysis precipitation used there in earlier L4_SM versions. The use of IMERG precipitation improves the anomaly time series correlation coefficient of L4_SM surface soil moisture (versus independent satellite estimates) by 0.03 in the global average and by up to ∼0.3 in parts of South America, Africa, Australia, and East Asia, where the quality of the gauge-only precipitation product used in earlier L4_SM versions is poor. The improvements also reduce the time series standard deviation of the Tb observation-minus-forecast residuals from 5.5 K in L4_SM Version 5 to 5.1 K in Version 6. Significance Statement Soil moisture links the land surface water, energy, and carbon cycles. NASA Soil Moisture Active Passive (SMAP) satellite observations and observation-based precipitation data are merged into a numerical model of land surface water and energy balance processes to generate the global, 9-km resolution, 3-hourly Level-4 Soil Moisture (L4_SM) data product. The product is available with ∼2.5-day latency to support Earth science research and applications, such as flood prediction and drought monitoring. We show that a recent L4_SM algorithm update using satellite- and gauge-based precipitation inputs from the NASA Integrated Multi-satellitE Retrievals for the Global Precipitation Measurement (IMERG) products improves the temporal variations in the estimated soil moisture, particularly in otherwise poorly instrumented regions in South America, Africa, Australia, and East Asia.

Impact of SAR-based vegetation attributes on the SMAP high-resolution soil moisture product

NASA's Soil Moisture Active Passive (SMAP) mission employs L-band radiometer observations with a spatial resolution of ~33 km to produce global soil moisture products at various spatial resolutions and regular intervals. Among these products is the SMAP-Sentinel active-passive high-resolution soil moisture, available at spatial resolutions of 1 km and 3 km. The SMAP-Sentinel product combines data from the SMAP L-band radiometer and the Copernicus Sentinel-1A and Sentinel-1B C-band Synthetic Aperture Radar (SAR) observations. The SMAP-Sentinel high-resolution soil moisture product enables various hydrological and agricultural applications that were previously beyond the capability of coarser resolution radiometer-only products. However, the assessment of SMAP-Sentinel product over SMAP core validation sites (CVS) has revealed high errors and biases, particularly in agricultural regions. We suspect that the discrepancy may be related to the vegetation attribute parameters (e.g., vegetation optical depth, τ) used in the SMAP-Sentinel baseline Single-Channel Algorithm (SCA) microwave emission model (i.e., τ-ω model) for soil moisture retrievals, which might be out of sync due to reliance on NDVI climatology in the τ estimation. In this study, we leveraged and evaluated the advantage of using vegetation attribute information inherently available through the SMAP ratiometer and Sentinel- 1A/1B SAR backscatter as an alternative to NDVI climatology-derived τ in the SCA to enhance soil moisture retrievals. The SAR cross-polarization (vh) backscatter potentially contains vegetation attribute information that can be correlated with the coarse resolution τ derived from SMAP observations. Therefore, we hypothesized that including Sentinel- 1A/1B vh observations to derive high-resolution (1 km and 3 km) τ, and subsequently incorporating it into the SCA, can significantly improve the accuracy of the SMAP-Sentinel soil moisture product. We established a statistical relationship between Sentinel- 1A/1B SAR backscatter and the SMAP Dual-Channel Algorithm (DCA)-based τ retrieval at ~33 km, for a specific region and different landcover classes at a global extent, using seven years of observations (2015–2022). Further, we developed an algorithm to downscale the SMAP DCA τ of ~33 km to 1 km and 3 km resolutions based on the developed statistical relationships, enabling us to capture the actual temporal variability in vegetation attributes (i.e., τ) at higher resolutions. The downscaled τ values were then incorporated into the SCA to retrieve SMAP-Sentinel high-resolution (1 km and 3 km) soil moisture. The validation analysis of high-resolution soil moisture retrievals demonstrates that the inclusion of the downscaled τ approach significantly improved the performance of the SMAP-Sentinel product by reducing both bias and error standard deviation compared to the retrievals based on τ derived from the NDVI climatology.

Global estimates of daily evapotranspiration using SMAP surface and root-zone soil moisture

The interplay between soil moisture and evapotranspiration modulates the water available to sustain soil evaporation and influences canopy stomatal conductance controls on vegetation transpiration. Modeling this behavior remains challenging. Indeed, satellite remote sensing based Penman-Monteith (PM) ET models tend not to directly consider soil moisture constraints on evaporation and transpiration due to a lack of consistent soil moisture data. To address this issue, we modified a PM model to include satellite enhanced surface and root zone soil moisture from the National Aeronautics and Space Administration (NASA) Soil Moisture Active Passive (SMAP) mission. The resulting model was used to produce global 9-km daily ET estimates, including contributing fluxes from soil evaporation, transpiration and evaporation of canopy-intercepted precipitation. The global PM ET estimates were assessed using in situ sap flow and AmeriFlux measurements, upscaled FLUXCOM latent heat flux, as well as against other independent global ET data products (GLEAM, GLDAS, SSEBop, and LandFlux-EVAL). The modelled transpiration showed similar seasonal variation and positive correlation to in situ sap flow measurements available from several forest sites (R2 = 0.85; p < 0.01). When compared against AmeriFlux data, the PM ET estimates showed favorable agreement with annual ET measurements extracted from 34 diverse sites (R2 = 0.58; p < 0.01; RMSE = 227 mm yr−1). The PM 8-day ET results also reflected a similar hemispheric seasonality as the global FLUXCOM record (R2 = 0.94–0.98; p < 0.01), while comparisons against other global ET products showed moderate mean differences of between 49 and 107 mm yr−1 (11–25%) over the global domain. Our PM ET estimates varied up to 52% in response to SMAP surface soil moisture dynamics, displaying stronger surface (0–5 cm depth) than root zone (0–100 cm) soil moisture sensitivity. While PM ET sensitivity to soil moisture was greater in arid climate regions, it was also significant in humid climate zones, with analysis indicating that the inclusion of soil moisture predominantly acts as a sustaining influence on ET, especially in moisture limited drylands. PM ET sensitivity to temperature was stronger in humid forest regions relative to other climate and land cover regimes. Overall, the model results clarify the influence of soil moisture heterogeneity on the global ET pattern as informed by satellite-based estimates of surface and root zone soil moisture. Potential enhancements to the spatial and vertical resolution of soil moisture inputs are expected to enable further ET improvements through more realistic model representation of soil and plant available water.

Assimilating Soil Moisture Information to Improve the Performance of SWAT Hydrological Model

The present work aims to highlight the possibility of improving model performance by assimilating soil moisture information in the calibration and validation process. The Soil and Water Assessment Tool (SWAT) within QGIS, i.e., QSWAT, was used to simulate the hydrological processes within the test basin, i.e., Vosvozis River Basin (VRB) in NE Greece. The model calibration and validation were conducted via SWAT-CUP for a four-year period from 2019 to 2022, in three different ways, i.e., using the traditional calibration process with river flow measurements, using satellite-based soil moisture only in the calibration, and finally incorporating satellite-based soil moisture datasets and calibrating using simultaneously flow and soil moisture information. All modeling approaches used the same set of input data related to topography, land cover, and soil information. This study utilized the recently released global scale daily downscaled soil moisture at 1 km from the Soil Moisture Active Passive (SMAP) mission to generate soil moisture datasets. Two performance indicators were evaluated: Nash Sutcliffe (NS) and coefficient of determination (R2). Results showed that QSWAT successfully simulated river flow in VRB with NS = 0.61 and R2 = 0.69 for the calibration process using river flow measurements at the outlet of VRB. However, comparing satellite-based soil moisture, NS and R2 were considerably lower with an average derived from the 19 subbasins (NS = 0.55, R2 = 0.66), indicating lower performance related to the simulation of soil moisture regime. Subsequently, introducing satellite-derived soil moisture as an additional parameter in the calibration process along with flow improved the acquired average soil moisture results of the 19 subbasins (NS = 0.85, R2 = 0.91), while preserving the satisfactory performance related to flow simulation (NS = 0.57, R2 = 0.66). Our work thus demonstrates how assimilating available satellite-derived soil moisture information into the SWAT model may offer considerable improvement in the description of soil moisture conditions, keeping the satisfactory performance in flow simulation.

Smart Data Blending Framework to Enhance Precipitation Estimation through Interconnected Atmospheric, Satellite, and Surface Variables

Accurate precipitation estimation remains a challenge, though it is fundamental for most hydrological analyses. In this regard, this study aims to achieve two objectives. Firstly, we evaluate the performance of two precipitation products from the Integrated Multi-satellitE Retrievals for Global Precipitation Measurement (GPM-IMERG) for Sicily, Italy, from 2016 to 2020 by a set of categorical indicators and statistical indices. Analyses indicate the favorable performance of daily estimates, while half-hourly estimates exhibited poorer performance, revealing larger discrepancies between satellite and ground-based measurements at sub-hourly timescales. Secondly, we propose four multi-source merged models within Artificial Neural Network (ANN) and Multivariant Linear Regression (MLR) blending frameworks to seek potential improvement by exploiting different combinations of Soil Moisture (SM) measurements from the Soil Moisture Active Passive (SMAP) mission and atmospheric factor of Precipitable Water Vapor (PWV) estimations, from the Advanced Microwave Scanning Radiometer-2 (AMSR2). Spatial distribution maps of some diagnostic indices used to quantitatively evaluate the quality of models reveal the best performance of ANNs over the entire domain. Assessing variable sensitivity reveals the importance of IMERG satellite precipitation and PWV in non-linear models such as ANNs, which outperform the MLR modeling framework and individual IMERG products.

A global daily soil moisture dataset derived from Chinese FengYun Microwave Radiation Imager (MWRI)(2010–2019)

Surface soil moisture (SSM) is an important variable in drought monitoring, floods predicting, weather forecasting, etc. and plays a critical role in water and heat exchanges between land and atmosphere. SSM products from L-band observations, such as the Soil Moisture Active Passive (SMAP) Mission, have proven to be optimal global estimations. Although X-band has a lower sensitivity to soil moisture than that of L-band, Chinese FengYun-3 series satellites (FY-3A/B/C/D) have provided sustainable and daily multiple SSM products from X-band since 2008. This research developed a new global SSM product (NNsm-FY) from FY-3B MWRI from 2010 to 2019, transferred high accuracy of SMAP L-band to FY-3B X-band. The NNsm-FY shows good agreement with in-situ observations and SMAP product and has a higher accuracy than that of official FY-3B product. With this new dataset, Chinese FY-3 satellites may play a larger role and provide opportunities of sustainable and longer-term soil moisture data record for hydrological study.

Parameterization of soil evaporation and coupled transport of moisture and heat for arid and semiarid regions

Soil moisture is an important parameter in numerical weather forecasting and climate projection studies, and it is extremely important for arid and semiarid areas. Different from those in relatively wet areas, for arid and semiarid areas, mechanisms associated with the transportation, condensation, and evaporation of water vapor in soil interior cannot be neglected. In this paper, schemes associated with soil evaporation and coupled transport of soil moisture and heat were developed for the integrated urban land model (IUM) to improve the simulation of soil moisture in arid and semiarid areas. The whole layer soil evaporation (WSE) scheme was developed to improve the simulation of soil evaporation. The soil’s inner layer water vapor transport is considered a part of WSE. The transport of water and heat in the inner soil was linked to the phase change of water. The NASA Soil Moisture Active Passive (SMAP) mission Level-4 Soil Moisture product and 10-cm volumetric soil moisture observations in 358 autonomic soil moisture observation sites were used for validating the simulation results. The results indicate that after using the WSE scheme and considering the coupled transport of moisture and heat in the soil interior, the simulation of soil moisture was improved definitely. For June, July, and August, the biases of soil moisture simulation decreased by approximately 22.5, 34.4, and 27.5%, respectively, while the RMSEs decrease by approximately 7.0, 8.7, and 9.6%, respectively. The improvement of soil moisture simulation indicates that in arid and semiarid areas soil water vapor transport is important and cannot be neglected.

The first polarimetric GNSS-Reflectometer instrument in space improves the SMAP mission’s sensitivity over densely vegetated areas

The Soil Moisture Active Passive (SMAP) mission has dramatically benefited our knowledge of the Earth’s surface processes. The SMAP mission was initially designed to provide complementary L-band measurements from a radiometer and a radar, producing geophysical measurements at a finer spatial resolution than the radiometer alone. Both instruments, sensitive to the geophysical parameters in the swath, provided independent measurements at different spatial resolutions. A few months after SMAP’s launch, the radar transmitter’s high-power amplifier suffered an anomaly, and the instrument could no longer return data. During recovery activities, the SMAP mission switched the radar receiver frequency facilitating the reception of Global Positioning System (GPS) signals scattered off the Earth’s surface, and enabling the radar to become the first spaceborne polarimetric Global Navigation Satellite System – Reflectometry (GNSS-R) instrument. With more than 7 years of continued measurements, SMAP GNSS-R data are the most extensive existing GNSS-R dataset and the only one providing GNSS-R polarimetric measurements. We demonstrate that the SMAP polarimetric GNSS-R reflectivity, derived from Stokes parameters mathematical formulation, can enhance the radiometer data over dense vegetation areas, recovering some of the original SMAP radar capability to contribute to the science products and pioneering the first polarimetric GNSS-R mission.

Assessment of five SMAP soil moisture products using ISMN ground-based measurements over varied environmental conditions

Since the launch of Soil Moisture Active Passive (SMAP) mission in 2015, several advanced global surface soil moisture (SM) products derived from different retrieval schemes have been released. However, the factors contributing to the performance differences of these SMAP products have not been fully investigated. This study tries to fill the gap by assessing and intercomparing five SMAP products, namely, the single channel algorithm V/H-pol (SCA-V/H), dual channel algorithm (DCA), multi-temporal dual channel algorithm (MT-DCA) and the new SMAP-INRAE-BORDEAUX (SMAP-IB), using the International Soil Moisture Network (ISMN) ground measurements worldwide during 2016–2020. After reviewing the retrieval algorithms, the impact of five potential perturbing factors on the skills of all products is reported; these factors including mean surface soil temperature (MSST), surface roughness (log(SR)), vegetation density (characterized by vegetation optical depth (VOD)), mean surface soil wetness (MSSM) and soil organic matter (SOM). Results shows that the SMAP-IB product has the highest overall R value of 0.75 with ISMN ground SM, and the smallest unbiased root mean square difference (ubRMSD) values same as SCA-V and DCA (∼0.058 m3/m3). The performance of all five products in terms of R and ubRMSD rapidly degrades over the regions with high VOD, rough surface and low MSST. In contradiction with the fact that product performance degrades with increasing roughness, the ubRMSD of all five products increases with decreasing log(SR) on a relatively smooth surface (log(SR) < 6) with larger growth rates for SMAP-IB, SCA-H and MT-DCA. Regarding characterizing the temporal variations of in situ SM anomalies (Ranom), Ranom increases as the ground becomes wet for all products within a certain range (MSSM < 0.3 m3/m3). In particular, SMAP-IB and MT-DCA present higher Ranom values than the other three products under wet soil surfaces (MSSM > 0.3 m3/m3). The two metrics R and Ranom decrease significantly with increasing SOM for SMAP-IB compared to the other products, and SMAP-IB obtains the lowest values for both metrics when SOM > 20%. These findings are expected to provide useful information for appropriate product selection and improvement.

Assessment of SMAP and AMSR2 freeze/thaw products over Russia using in situ measurements

ABSTRACT Recently, many freeze/thaw (FT) products have been developed using spaceborne microwave measurements. In this letter, we compared the newest FT products, SMAP36 (36 km resolution) and SMAP09 (9 km resolution) provided by the Soil Moisture Active Passive (SMAP) mission and one product, AMSR2 FT, generated by the Advanced Microwave Scanning Radiometer 2 (AMSR2) against surface soil temperature measurements across Russia using a total of 494 stations. The results indicate that AMSR2 FT has a better performance in Russia than the SMAP products, which is more pronounced in the AM (descending orbit) value of overall accuracy (OA) than in the PM (ascending orbit). It is challenging to distinguish FT states in the transition periods between warm and cold seasons, but AMSR2 FT performs better than SMAP products. AMSR2 FT has a high OA in inland areas but a low OA along coastal zones because pixels may contain a water body or lake ice. The poorest SMAP results are mainly distributed in mixed forest areas, indicating that the algorithm should be improved to solve the wet snow problem in these areas. The results of this study could help improve FT products in Russia and provide application instructions for FT product users.