Sodium Dodecyl Sulfate Research Articles

On the mechanism of Ca(OH)2 structure modulation by surfactants: Experimental and calculative studies

Surfactants are widely used for structure modulation of calcium-based materials. However, the modification mechanisms underlying the CaO digestion improved by surfactants for Ca(OH)2 production remain unclear. This study employed experiment methods, Density Functional Theory (DFT), and Molecular Dynamics methods (MD) to reveal the mechanism of surfactant modulation at a molecular level. The adsorption energy of Primary Alcohol Ethoxylate (AEO), Sodium Dodecyl Sulfate (SDS), H2O, and Dodecyl Trimethyl Ammonium Bromide (DTAB) on CaO(001) surface were −52.62, −51.98, –23.79, and 3.96 kcal/mol, respectively. The strong chemisorption of AEO and SDS on the surface of CaO improved its structure stability. AEO and SDS weakened the diffusion of H2O to CaO surface, thus causing the reaction between CaO and H2O to be suppressed. After being modulated by SDS and AEO, better crystallinity of Ca(OH)2 and finer crystalline grains were observed with the formation of developed pore structure. AEO has a longer molecular chain, giving better modification performance. On the contrary, DTAB accelerated the diffusion of H2O to CaO surface, leading to more energy released and causing the fast growth of Ca(OH)2 crystals, as evidenced by the much larger particle size compared to that of AEO and SDS. This process led to the creation of a larger pore structure. Desulfurization was used as a performance indicator to evaluate the surfactants modulation efficacy. The sulfur capacity of Ca(OH)2 regulated by 1 % AEO was 100.05 mg/g, being the highest among the used surfactants. For comparison, the sulfur capacity without additives was 49.64 mg/g. This study shows that nonionic surfactants are an ideal choice for regulating the structure of Ca(OH)2, as they can effectively inhibit crystal growth.

Effect of surfactant's charge properties on behavior, physiology, and biochemistry and the release of microcystins of Microcystis aeruginosa

Surfactant pollution is escalatitheng in eutrophic waters, but the effect of surfactant charge properties on the physiological and biochemical properties of toxin-producing microalgae remains inadequately explored. To address this gap, this study explores the effects and mechanisms of three common surfactants―cetyltrimethylammonium bromide (CTAB, cationic), sodium dodecyl sulfate (SDS, anionic), and Triton X-100 (nonionic)―found in surface waters, on the agglomeration behavior, physiological indicators, and Microcystin-LR (MC-LR) release of Microcystis aeruginosa (M. aeruginosa) by using UV-visible spectroscope, Malvern Zetasizer, fluorescence spectrometer, etc. Results suggest that charge properties significantly affect cyanobacterial aggregation and cellular metabolism. The CTAB-treated group demonstrates a ∼5.74 and ∼9.74 times higher aggregation effect compared to Triton X-100 and SDS (300 mg/L for 180 min) due to strong electrostatic attraction. Triton X-100 outperforms CTAB and SDS in polysaccharide extraction, attributed to its higher water solubility and lower critical micelle concentration. CTAB stimulates cyanobacteria to secrete proteins, xanthohumic acid, and humic acids to maintain normal physiological cells. Additionally, the results of SEM and ion content showed that CTAB damages the cell membrane, resulting in a ∼90% increase in the release of intracellular MC-LR without cell disintegration. Ionic analyses confirm that all three surfactants alter cell membrane permeability and disrupt ionic metabolic pathways in microalgae. This study highlights the relationship between the surface charge properties of typical surfactants and the dispersion/agglomeration behavior of cyanobacteria. It provides insights into the impact mechanism of exogenous surfactants on toxic algae production in eutrophic water bodies, offering theoretical references for managing surfactant pollution and treating algae blooms.

Effect of different concentrations of sodium dodecyl sulfate (SDS) in cryodiluent on freezability and DNA integrity of bull spermatozoa

Effect of different concentrations of sodium dodecyl sulfate (SDS) in cryodiluent on freezability and DNA integrity of bull spermatozoa

Surface modification for enhanced Anti‐Wetting properties of electrospun omniphobic membranes in membrane distillation

AbstractMembrane wetting caused by substances in the feed solution with low surface tension has posed serious issues for membrane distillation (MD). Omniphobic membranes could be helpful when dealing with this problem because they strongly repel liquids with a wide range of surface tensions. We fabricated electrospun omniphobic membranes containing PVDF‐TEOS‐PFDTMS, PVDF‐HFP‐TMOS‐PFDTMS, and PVDF‐HFP‐TEOS‐PFDTMS. All electrospun membranes have shown contact angles >90°, but the electrospun membrane containing PVDF‐HFP‐TEOS‐PFDTMS has shown super repellence with a contact angle >150° and maintains stable salt rejection and water flux in direct contact MD processes in the presence of sodium dodecyl sulfate surfactant (up to 0.3 mM). Furthermore, the morphology and crystallinity of the electrospun membranes were studied by scanning electron microscopy and Fourier‐transform infrared spectroscopy, and the percentage composition of elements was analyzed by x‐ray photoelectron spectroscopy. liquid entry pressure, mechanical strength, and the porosity of the electrospun omniphobic membranes were also studied.

Morphological aspects and the effectiveness of photodynamic inactivation against Rhizopus oryzae in different life cycles.

Mucormycosis is an extremely aggressive fungal disease with a high mortality rate, especially in people with compromised immune systems. Most cases of mucormycosis are caused by the fungus Rhizopus oryzae. The treatments used are based on high doses of antifungals, associated with surgical resections, when it is possible. However, even with this aggressive treatment, the estimated attributable mortality rate is high. There is therefore a need to develop adjuvant treatments. Photodynamic Inactivation (PDI) may be an auxiliary therapeutic option for mucormycosis. Due to the lack of reports in the literature on the morphology and photodynamic inactivation of R. oryzae, characterization of the fungus using Confocal Microscopy and Transmission Electron Microscopy, and different protocols using Photodithazine® (PDZ), a chlorin e6 compound, as a photosensitizer, were performed. The fungus growth rate under different concentrations and incubation times of the photosensitizer and its association with the surfactant Sodium Dodecyl Sulphate (SDS) was evaluated. For the hyphae, both in the light and dark phases, in the protocols using only PDZ, no effective photodynamic response was observed. Meanwhile with the combination of SDS 0.05% and PDZ, inhibition growth rates of 98% and 72% were achieved for the white and black phase, respectively. In the conidia phase, only a 1.7 log10 reduction of the infective spores was observed. High concentration of melanin and the complex and resistant structures, especially at the black phase, results in a high limitation of the PDI inactivation response. The combined use of the SDS resulted in an improved response, when compared to the one obtained with the amphotericin B treatment.

Examination of cytotoxic and antimicrobial effect of whitening toothpastes: an in vitro study.

Toothpastes are widely used to protect oral and teeth health. This study aims to examine the cytotoxic and antimicrobial effects of whitening toothpastes. In this study, extracts were prepared according to ISO 10993-12:2021 standard (0.2 g/mL) using whitening and conventional toothpastes. The prepared extracts were added to human gingival fibroblast cell lines (HGF-1) in different dilutions (1:1, 1:2, 1:4, 1:8, 1:16, and 1:32) and a cytotoxicity test was performed. Antimicrobial analysis of toothpastes was performed on Streptococcus mutans, Staphylococcus aureus, and Candida albicans using the hole-plate diffusion method. Cell viability and microbial analysis data were examined using two-way analysis of variance (ANOVA) and Tukey post-hoc test (p < 0.05). Toothpastes with sodium lauryl sulfate (SLS) in their composition showed statistically more toxic effects (p < 0.05). The activated carbon toothpastes without SLS showed over 90% cell viability after dilution. Although the dilution rate of toothpastes containing SLS increased, cell viability remained below 70%. All toothpastes used in the study showed antimicrobial effects on S. mutans, S. aureus, and C. albicans. Toothpaste containing hydrogen peroxide and SLS produced more antibacterial effects than activated carbon, blue covarine, microparticles, and conventional toothpaste. SLS-containing toothpastes showed more toxicity on HGF-1 cells. Toothpaste containing hydroxyapatite did not show toxic effects on HGF-1 cells. SLS, sodium lauryl sarcosinate and hydrogen peroxide in toothpastes increase antimicrobial effects.

Effect of Edge Activator Combinations in Transethosomal Formulations for Skin Delivery of Thymoquinone via Langmuir Technique

Abstract: Thymoquinone (TQ), a bioactive compound found in Nigella sativa seeds, possesses diverse therapeutic properties for skin conditions. However, formulating TQ presents challenges due to its hydrophobic nature and chemical instability, which hinder its skin penetration. Transethosomes, as a formulation, offer an environment conducive to enhancing TQ’s solubility, stability, and skin permeation. To optimize TQ transethosomal formulations, we introduced a combination of ionic and nonionic surfactants, namely Tween 20 and sodium lauryl sulfate (SLS) or sodium lauroyl glutamate (SLG). Surfactants play a crucial role in stabilizing the formulation, reducing aggregation, improving biocompatibility, and minimizing potential toxicity. We fine-tuned the formulation composition and gained insights into its interfacial behavior using the Langmuir monolayer technique. This method elucidated the interfacial properties and behavior of phospholipids in ethosome and transethosome formulations. Our findings suggest that monolayer studies can serve as the initial step in selecting surfactants for nanocarrier formulations based on their interfacial dilational rheology studies. It was found that the addition of surfactant to the formulation increased the elasticity considering the capability of transethosomes to significantly decrease their radius when permeating the skin barrier. The results of the dilational rheology experiments were most relevant to drug permeation through the skin for the largest amplitude of deformation. The combination of Tween 20 and SLS efficiently modified the rheological behavior of lipids, increasing their elasticity. This conclusion was supported by in vitro studies, where formulation F2 composed of Tween 20 and SLS demonstrated the highest permeation after 24 h (300.23 µg/cm2). Furthermore, the F2 formulation showed the highest encapsulation efficiency (EE) of 94%, surpassing those of the control and ethosomal formulations. Additionally, this transethosomal formulation exhibited antimicrobial activity against S. aureus, with a zone of inhibition of 26.4 ± 0.3 mm. Importantly, we assessed the cytotoxicity of both ethosomes and transethosomes at concentrations ranging from 3.5 µM to 50 µM on HaCaT cell lines and found no cytotoxic effects compared to TQ hydroethanolic solution. These results suggest the potential safety and efficacy of TQ transethosomal formulations.

Sensitive Voltammetric Detection of Acetaminophen on CuONPs-MWCNTs Modified Glassy Carbon Electrode with Enhancement Effect of Anionic Surfactant

In the present work, a voltammetric method using differential pulse voltammetric technique for the assessment of antipyretic and analgesic drug, acetaminophen was developed. The CuO nanoparticles were prepared and characterized. A glassy carbon electrode (GCE) fabricated with the suspension of CuO nanoparticles (CuONPs) and multi-walled carbon nanotubes (MWCNTs) were used. The modified electrode showed improved anodic peak current by introducing an anionic surfactant sodium dodecyl sulphate in phosphate buffer solution. The consequence of pH of supporting electrolyte, amount of nanoparticles suspension and surfactant concentration was investigated at a physiological pH of 7.4. Using differential pulse voltammetry, the fabricated electrode showed linear dynamic range from 9 to 160 nM of acetaminophen concentration. From the calibration plot, the computed detection limit was 5.06 nM and quantification limit was 16.88 nM. The developed method was checked for its reproducibility and assay during a day and intraday as well. The developed process was fruitfully applied to detect acetaminophen in pediatric oral suspensions administered to infants.

Histological evaluation of decellularization of freeze dried and chemically treated indigenously prepared bovine pericardium membrane.

Decellularization is regarded as a xenogenic antigen-reduction technique because it effectively eliminates all cellular and nuclear components while mitigating any negative impact on the composition, biological functionality, and structural integrity of the remaining extracellular matrix. This study aimed to histologically evaluate native, freeze dried and chemically decellularized bovine pericardium membrane. Also, this study focused on preservation of extracellular matrix after decellularization. Bovine pericardium membrane was decellularized by freeze thaw cycle followed by freeze drying and 1% sodium dodecyl sulphate. Unprocessed pericardium was used as control. The effectiveness of Decellularization was assessed based on the reduction of histologically visible nuclei. Decellularization by freeze thaw cycle followed by freeze drying resulted in 17.84% reduction in nuclei content and decellularization by sodium dodecyl sulphate results in 92% reduction in nuclei content compare to control group. Picrosirius red staining for freeze dried group displayed loosely organised, thin collagen bundles that exhibit reddish-yellow birefringence and sodium dodecyl sulfate group revealed dense collagen bundles that are parallelly organised and compact, exhibiting reddish-yellow birefringence and showed good structural integrity. These results suggested that the sodium do decyl sulfate showed optimal decellularization results with better extracellular matrix preservation. It may be a suitable protocol for producing a suitable scaffold for periodontal tissue regeneration.

Developing Porcine Acellular Dermal Matrix by Using Sodium Dodecyl Sulfate and Biomechanical Property Testing

ABSTRACT Introduction: An alternative for supporting wound closure is acellular dermal matrix (ADM), which serves as a scaffold. Humans and porcine possess a similar biochemical makeup. Using sodium dodecyl sulfate (SDS), a decellularization technique was developed and its biomechanical properties were assessed. Methods: This work uses a pig dermis layer for an in vitro experimental investigation with a posttest-only control group. Using SDS 0.5% for 14 days, the decellularization procedure compares the biomechanical properties and cellular components of the ADM with control. The Mann–Whitney U-test for data with a nonnormal distribution or the t-test for continuous variables with a normal distribution was used for the study. Results: Histological analysis revealed that none of the cells were detected in four fields of analysis in the treatment group; however, 48.00 ± 4.86 cells were observed in the control group (P &lt; 0.001); the collagen organization in the control group appeared to be identical. The variables elastic modulus (MPa) (136.78 vs. 129.19; P = 0.556), thickness (mm) (3.27 vs. 3.15; P = 0.397), and width (mm) (8.50 vs. 8.56; P = 0.40) did not differ statistically. The following data showed significant differences between the treatment group and the control group: break strain (%) (108.46 vs. 67.48; P &lt; 0.001) and tensile strength stress (MPa) (19.916 vs. 22.1; P = 0.030). Conclusions: SDS decellularization is an efficient method for creating an ADM. Although the break strain was considerably lower, the treatment group’s tensile strength was higher. Elastic modulus changes were not observed.

Screening of sustainable biosurfactant produced by indigenous bacteria isolated from Egyptian oil fields for microbial enhanced oil recovery

Microbial enhanced oil recovery (MEOR) stands out as an environmentally and economically significant approach utilizing microorganisms and their bio-products to reduce residual oil, and hence improve oil recovery. Due to the pollution that synthetic surfactants entail and their very expensive costs, there is a growing necessity for clean, eco-friendly alternatives. This research focuses on exploring the potential of producing biosurfactants by indigenous bacteria isolated from Egyptian Oil Fields. Five crude oil and formation water samples were collected from four Egyptian Oil Fields located in the Western Desert (WD). Nine bacterial strains were isolated and screened for biosurfactant production using different assays, followed by the extraction and purification of crude biosurfactants. The most promising biosurfactant-producing strains that showed their ability to produce effective biosurfactant according to biosurfactant screening assays were selected for further studies and identified through 16S rRNA gene sequencing. Furthermore, core-flooding micromodel experiments were conducted to evaluate the effectiveness of these extracted biosurfactants compared to a synthetic surfactant, Sodium Dodecyl Sulfate (SDS), in improving oil recovery. Results showed that the most promising biosurfactant-producing strains that exhibited notable performance and ability to produce effective biosurfactants were namely A-LB, C-LB2, and B-YM2. Therefore, they were selected for further studies and identified through 16S rRNA gene sequencing. 16S rRNA gene sequencing results showed that namely A-LB, C-LB2, and B-YM2 were identified as Bacillus massiliigabonensis, Pseudomonas nitritolerans, and Aninetobacter seohaensis, respectively. Finally, core flooding results showed that the biosurfactant produced by Bacillus massiliigabonensis demonstrated significant performance by recovering 69.96% of additional oil, whereas 68.11% and 63.34% of additional oil were recovered using biosurfactants produced by Pseudomonas nitritolerans, and Aninetobacter seohaensis, respectively. It was also noticed that the biosurfactant produced by Bacillus massiliigabonensis demonstrated significant potential in improving oil recovery compared to the synthetic surfactant (61.78%), it outperformed 8.18% more additional oil. These findings validate the effectiveness of the produced biosurfactants over synthetic surfactants emphasizing their potential as sustainable and cost-effective alternatives for enhanced oil recovery in Egyptian oil fields.

Optimization of Ultrasound-enhanced Subcritical Water Hydrolysis of Oil Palm Empty Fruit Bunch for the Production of Fermentable Sugar

To enhance the hydrolysis to produce fermentable sugar, oil palm empty fruit bunch (OPEFB) has undergone ultrasonication pretreatment prior to subjection to subcritical water hydrolysis. This work aims to optimize the effect of temperature, reaction time, and the concentration of sodium dodecyl sulfate (SDS) as the surfactant, with the primary aim of maximizing sugar production in the subcritical water hydrolysis process applied to oil palm empty fruit bunch (OPEFB). The pretreatment process conditions were optimized using response surface methodology of the central composite design (RSM–CCD). The experimental design includes three factors and levels, with a range of 180–220 °C temperature (X1), 60–80 minutes process time (X2), and 1–5% w/w SDS concentration (X3), an α value of 1.68, and reducing sugar concentration (g/L) as response (Y1). The optimum condition for subcritical water hydrolysis of OPEFB was obtained at 208 °C, 78 minutes, and 2.6% w/w SDS concentration with an expected yield of 6.09 g/L. As a result, reducing sugar produced by enzymatic hydrolysis increased by 324.7% compared to raw OPEFB, with sugar yield of 45.64% after 36 hours. Along these, changes in crystallinity, chemical composition, lignocellulosic functional groups, and morphology were analyzed to determine the impact of the pre-treatment on OPEFB.

Influence of Surfactant on the Skin Permeation of Methylisothiazolinone and Methylchloroisothiazolinone.

Patch tests are often used in safety evaluations to identify the substance causing skin irritation, but the same substance can sometimes give positive or negative results depending on the test conditions. Here, we investigated differences in the skin penetration of two test compounds under different application conditions. We studied the effects of the anionic surfactant sodium dodecyl sulfate (SDS) and the nonionic surfactant polysorbate 80 (PS) on skin penetration of the preservatives methylisothiazolinone (MT) and methylchloroisothiazolinone (MCT), which are used in cosmetics such as shampoos. The skin permeation of MT was enhanced by SDS but was unchanged by PS. Skin impedance decreased in the presence of SDS whereas PS had the same effect as the control aqueous solution, suggesting that SDS reduction of the barrier function of skin affects the permeation of MT, a hydrophilic drug. Application of a mixture of MCT and MT in the presence of SDS did not affect the skin permeation of MCT whereas the permeation of MT was enhanced by SDS, indicating that the skin permeation of MCT is less affected by SDS than is MT. Thus, attention should be paid to the possible effect of co-solutes, especially hydrophilic drugs.

Comparative Analysis of the Mechanisms and Kinetics of CO2 Hydrate Formation with Sodium Dodecyl Sulfate and L-Leucine Additions under Static Conditions

Comparative Analysis of the Mechanisms and Kinetics of CO2 Hydrate Formation with Sodium Dodecyl Sulfate and L-Leucine Additions under Static Conditions

Determination of 13 potential anti-obesity agents in hair by dispersive liquid-liquid microextraction-assisted UHPLC-MS/MS

As the adulteration of dietary supplements with synthetic drugs remains a prevalent issue, the inclusion of anti-obesity agents may pose health risks, potentially leading to central nervous system or cardiovascular diseases. However, surveillance studies on the use of anti-obesity agents by the Chinese population are limited. This study aims to establish an efficient and rapid hair pretreatment method using dispersive liquid-liquid microextraction (DLLME) combined with high-speed grinding and develop a sensitive and accurate analytical method employing ultra high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) for detecting 13 potential anti-obesity agents in hair samples. Herein, hair samples were washed sequentially with 0.1% sodium dodecyl sulfate (SDS), water and acetone, and then ground at high speed using 1 mL of an extraction solution (internal standard solution-n-butanol-1.2 mol/L Na2HPO4, pH10.0, 100:400:500, v/v/v for procaterol; internal standard solution-ethyl acetate-1.2 mol/L Na2HPO4, pH8.0, 100:300:600, v/v/v for other 12 anti-obesity agents) while simultaneously performing DLLME. The developed method successfully detected 13 anti-obesity agents within 11 min, including bambuterol, clenbuterol, ractopamine, clorprenaline, formoterol, salbutamol, terbutaline, procaterol, phentermine, bupropion, sibutramine, desmethyl sibutramine, and N,N-didesmethyl sibutramine, which improved the screening efficiency. The calibration curves exhibited good linearity of 0.025–5 ng/mg, achieving correlation coefficients of r ≥ 0.99. The lower limits of quantification (LLOQs) for the analytes were 0.025 ng/mg, demonstrating acceptable levels of accuracy and precision. Recovery rates ranged between 73.30% and 107.47% across the three concentrations of 0.075, 0.375, and 3.75 ng/mg. The validated method was successfully applied to 369 real cases and detected six analytes, including bambuterol, salbutamol, terbutaline, sibutramine, desmethyl sibutramine, and N,N-didesmethyl sibutramine. This method offers several advantages, including simple pretreatment, high extraction efficiency, rapid extraction, solvent economy, and pollution mitigation, making it highly suitable for large-scale surveillance of usage of added anti-obesity agents.

Promoting CH4 Hydrate Formation Kinetics by Utilizing Synergistic Promotion Effects of Graphite Particles with Sodium Dodecyl Sulfate

Promoting CH₄ Hydrate Formation Kinetics by Utilizing Synergistic Promotion Effects of Graphite Particles with Sodium Dodecyl Sulfate

Effective anaerobic digestion performance from kitchen wastewater by nanoscale zero-valent iron composite materials: Hydrogen corrosion capability and biological biogas upgrading

In this study, nanoscale zero-valent iron (nZVI) was modified by carboxymethylcellulose (CMC), extracellular polymeric substances (EPS) and sodium dodecyl sulfate (SDS), which were compared for the ability of hydrogen corrosion and then for the biogas upgrading during kitchen wastewater anaerobic digestion. The results showed that three nZVI composite materials addition could increase hydrogen evolution performance by 6.11∼10.30 % compared with nZVI. Especially, the hydrogen evolution from sodium dodecyl sulfate modified composite material reached 121.0 mL/g. The continuous release of hydrogen promoted the biogas yield to 510.96 mL/gVS in reaction group with SDS12-nZVI10 addition (N4), with CH4 content reached 93.37 %. Microbial community analysis showed that the total relative abundance of Methanothrix and Methanolinea was 43.60 % in N4, which was higher than other groups. It was indicated that H2-assisted biogas upgrading with nZVI composite materials addition was achievable, particularly in N4.

Influence of IDS and SDS compound ratio on pore structure and wettability of bituminous coal and anthracite: Experimental and simulation discussion

The pore and wetting characteristics of bituminous coal and anthracite treated with different proportions of tetrasodium iminodisuccinate (IDS) and sodium dodecyl sulfate (SDS) were measured. The pore structure characteristics of the coal were studied via low-temperature nitrogen adsorption analysis and the Frenkel-Halsey-Hill fractal theory. Zeta potential measurements were conducted to quantitatively analyze the degree of aggregation or dispersion of coal particles dissolved in solution. Changes in the coal surface morphology were observed and analyzed by scanning electron microscopy (SEM). The results show that when the ratio of IDS:SDS is 1:3, the specific surface area (SSA) values of bituminous coal and anthracite are the lowest. The composite reagent has a greater effect on improving the pore structure of anthracite than bituminous coal. Compared with bituminous coal, anthracite has better pore connectivity and a wider pore network. The absolute zeta potentials of bituminous coal and anthracite reach the maximum at an IDS:SDS ratio of 1:3, with values of 91.08 mV and 91.35 mV, respectively. The electrostatic potential distributions of the molecules show that the advantages of the electrostatic potential difference with water molecules enable IDS and SDS molecules to effectively attract water molecules and form hydrogen bonds, thus revealing the optimization mechanism of coal wettability.

Sequestration of cyanide ions from aqueous medium by physio-chemically fabricated biochar of peels of banana and grape fruit in ecofriendly way

Pakistan is an agricultural country producing plenty of fruits, like: mango, banana, apple, peaches, grapes, plums, variety of citrus fruits including lemon, grapefruit, and oranges. So far the peels of most of the fruits are usually wasted and not properly utilized anywhere. In this work, the peels of banana and grapefruit are converted into biochar by slow pyrolysis under controlled supply of air and used for sequestering cyanide ions from aqueous medium after chemical modification with ZnCl2 and sodium dodecyl sulfate (SDS). The modified biochar was characterized by various instrumental techniques, like: SEM, FTIR, TGA, and CHNS. Different parameters, like: time, temperature, pH, and dose of adsorbent affecting the adsorption of cyanide ions, onto prepared biochar were optimized and to understand the adsorption phenomenon, kinetic and thermodynamic studies were performed. Concentration of cyanide ions was estimated by employing standard ion selective electrode system and it is found that Sodium Dodecyl Sulfate treated biochar of banana peels shown more adsorption capacity, i.e.,: 17.080 mg/g as compared to all samples. Present work revealed that the biochar produced from the fruit waste has sufficient potential to eliminate trace quantities of cyanide from water, especially after treatment with sodium dodecyl sulfate.

Phase Distribution of Gas–Liquid Slug–Annular Flow in Horizontal Parallel Micro-Channels

As a transitional flow pattern, slug–annular flow occurs over a wide range of operating conditions in micro-channels while its distribution in parallel micro-channels has not been well characterized. Herein, we conducted an experiment to study the phase distribution of slug–annular flow in parallel micro-channels. The test section consists of a header with a diameter of 0.48 mm and six branch channels with a diameter of 0.40 mm. Nitrogen and 0.03 wt% sodium dodecyl sulfate (SDS) solution were used as the test fluids. It was found that the phase distribution of the slug–annular flow was unstable and the duration of the varying process showed regularity with different inlet conditions. Increasing the liquid superficial velocity facilitated the liquid phase to flow into channels at the fore part of the header, while the channels at the rear part of the header were more supplied with liquid as the gas superficial velocity, volume fraction of gas, and volume flow rate increased. Furthermore, the results indicated that the channels located at the rear part of the header experienced a pronounced enhancement in the supply of both the liquid and gas phases, with the spacing between the branches increasing. A predictive correlation was formulated to ascertain the distribution of the liquid phase within slug–annular flow across parallel micro-channels.