Anode For Sodium-ion Batteries Research Articles

Dual-gradient Concentration Distribution in Sb-Cu Alloy Nanoarrays for Robust Sodium-ionStorage.

Alloy-type materials are attractive for anodes in sodium-ion batteries (SIBs) owing to their high theoretical capacities and overall performance. However, the accumulation of stress/strain during repeated cycling results in electrode pulverization, leading to rapid capacity decay and eventual disintegration, thus hindering their practical applications. Herein, we report a 3D coral-like Sb-Cu alloy nanoarray with gradient distribution of both elements. The array features a Sb-rich bottom and a Cu-rich top with increasing Sb and decreasing Cu concentrations from top to bottom. The former is the active component that provides the high capacity, whereas the latter serves as an inert additive that acts against volume variation. The gradual transition in composition within the electrode introduces a ladder-type volume expansion effect, facilitating a smooth distribution and effective release of stress, thereby ensuring the wanted mechanical stability and structural integrity. The as-developed nanoarray affords a high reversible capacity (460 mAh g-1 at 0.5 C), stable cycling (89% retention over 120 cycles at 1.0 C), and superior rate capability (354 mAh g-1 at 10 C). The concentration dual-gradient strategy paves a new pathway of designing alloy-type materials for SIBs.

Engineering multiple heterogeneous Co/CoSe/MoSe2 embedded in carbon nanofibers with Co/Mo–Se–C bonding towards high performance sodium ion capacitors

MoSe2, as a representative two-dimensional transition selenide with a broad interlayer distance of 0.65 nm and a high theoretical capacity of 422 mAh g−1, is considered an optimal anode material for sodium-ion batteries (SIBs). However, its unsatisfactory electrical conduction and structural instability often lead to severe capacity decay during cycling, hindering its large-scale application in SIBs. To overcome these challenges, coupling heterostructures has been identified as an effective solution. The establishment of multiple heterointerfaces can minimize interface diffusion resistance, significantly enhancing ion and electron delivery dynamics compared to a single component. In this work, multiple heterogeneous Co/CoSe/MoSe2 uniformly distributed in carbon nanofibers (CNF) via Co/Mo–Se–C bonding are successfully synthesized using electrospinning and subsequent calcination. Importantly, the Co/CoSe and Co/MoSe2 heterointerfaces can greatly accelerate charge transfer and improve Na + adsorption capability compared to the CoSe/MoSe2 heterostructure, as corroborated by theoretical calculations. Given the high rate performance of Co/CoSe/MoSe2@CNF as an anode in SIBs (267.9 mAh g−1 at 5 A g−1), a rocking-chair sodium-ion capacitor (SIC) incorporating a Co/CoSe/MoSe2@CNF anode and a Na3V2(PO4)3 cathode is proposed, delivering high energy densities of 199.1 Wh kg−1 at 180 W kg−1 and 126.8 Wh kg−1 at 3280 W kg−1.

Hybrid of sub-1 nm single-dispersed polyoxometalate and reduced graphene oxide as advanced anodes for durable sodium-ion batteries

Polyoxometalates (POMs) are widely thought as promising choices for sodium-ion batteries (SIBs) because of their refined molecular structures and excellent reversible multielectron charge-discharge behaviors. Nevertheless, the POMs anion clusters could dissolve in the electrolyte when attacked by solvent molecules, thus reducing active sites and affecting the actual performance of these POMs-based electrodes. Herein, we report the development of a new type of electrode system that produces single-dispersed POMs molecular cluster/polydopamine/reduced graphene oxide composites ({PMo12}/PDA@rGO) through a self-assembly method. PDA acts as the role of “killing two birds with one stone”. It not only works as the linker to promote the formation of stable and uniform monodisperse {PMo12} clusters on the rGO surface, but also prevents the POMs from desorbing and dissolving upon deep cycling test. As a consequence, when used as the anode material for SIBs, the obtained {PMo12}/PDA@rGO exhibits an admirable long-term cycling performance, for instance, it holds a high Na-storage capacity of 277.5 mAh g−1 with an average Coulomb efficiency up to 99.89 % over 2000 cycles at 1 A g−1. This work offers versatile possibilities for designing POMs-based composites and provides new insight into developing single dispersed POMs for advanced SIBs.

Revealing the potential of a C6BN/black phosphorene nanocomposite as an anode material for sodium-ion batteries by atomistic simulation: DFT and AIMD

Black phosphorus (BP) has recently been regarded as a promising anode for sodium-ion batteries (SIBs) owing to its high storage capacity, rapid Na mobility in its lamellar structure, and low redox potential. However, its poor cyclability due to structural instability hampers its further implementation in SIBs. Here, we propose to design a novel two-dimensional nanocomposite by vertically stacking a C6BN sheet on a black phosphorene layer (C6BN/Black-Pn). Atomistic simulations by the van der Waals corrected density functional theory method were conducted to assess the suitability of the designed C6BN/Black-Pn model as a potential anode in SIBs. Benefiting from C6BN's electronic and chemical features, Black-Pn's band gap in C6BN/Black-Pn is diminished to 0.14 eV, which disappears and indicates metallic character upon sodiation. Additionally, the optimized Na adsorption energy within the nanocomposite is decreased to −2.06 eV, compared to −1.76 eV in pure Black-Pn and −0.98 eV in C6BN, with a modest diffusion barrier of 0.23 eV. A maximal theoretical capacity of 568.77 mAh/g and a low potential of 0.48 V are predicted for the nanocomposite. The above evaluation of C6BN/Black-Pn electrode for SIBs may provide better insights into adopting a physical approach to address BP electrochemical failures for advanced energy storage.

Large ligand metal-organic framework derived CoSe2 to improve sodium storage performance

Cobalt selenide has been regarded as a promising anode for sodium-ion battery owing to its high capacity. However, the issues of stacked problem and volume expansion during cycling significantly affects its performance. Herein, we used large-size ligands to successfully prepared a new cobalt metal–organic frameworks (MOFs), and used as a precursor to prepare CoSe2/MOFc by high-temperature selenization. Morphology characterizations revealed that due to the blocking effect of large-sized ligands, CoSe2 nanoparticles were evenly distributed on the carbon material. As an anode, CoSe2 /MOFc shows a good cyclic stability and high capacity (291 mAhg−1 after 1000 cycles at 1 Ag−1) due to the well dispersion of CoSe2 nanoparticles and the effective coating of carbon matrix. These results indicated that utilizingMOFs precursor with large ligands facilitates the distribution of nanoparticles on conductive carbon, allowing for the synthesis of sodium-ion battery electrodes with superior properties.

Modifying lignite-derived hard carbon with micron carbon tubes to improve sodium-ion storage

Lignite is a feasible raw material for the development of hard carbon anodes for sodium-ion batteries because of its high abundance and cheap cost. However, the existence of more defects in lignite-derived carbon, leads to unsatisfactory electrochemical performance as the anode of sodium-ion batteries, such as the initial Coulombic efficiency (ICE) and capacity retention rate. In this work, we introduce a preparation process of lignite-derived hard carbon using carbonized lignite and oleic acid (C9H16O2) as precursors. The micron carbon tubes (MCTs) generation on the hard carbon surface can provide additional Na+ active sites and reduce the defects, which effectively enhances the specific capacity and ICE of the anode. Benefiting the MCT modification, the hard carbon anode has a high reversible capacity of 244.8 mAh g−1 and ICE of 76.72%, which is respectively 30% and 10% higher than that of the bare hard carbon anode, this is of significance for the practical application of coal-based hard carbon in sodium-ion batteries.

Heterostructured Mn-Sn Bimetallic Sulfide Nanocubes Confined in N, S-co-Doped Carbon Framework as High-Performance Anodes for Sodium-Ion Batteries.

Benefiting from its high theoretical capacity, tin disulfide (SnS2) draws abundant interest and attention for its promising practical prospect for sodium-ion batteries (SIBs). However, the huge volumetric variation in sodiation/desodiation reactions usually results in the fast decay of rate and cycling properties, which seriously obstructs its future applicable foregrounds. Herein, heterostructured Mn-Sn bimetallic sulfide nanocubes confined in N and S-codoped carbon (MSS@NSC) were rationally designed via a facile coprecipitation followed by a sulfurization strategy. When used as anodes for SIBs, the heterojunctions at the interfaces effectively accelerate the Na+ diffusion rate to promote the sodium-storage reaction kinetics. The N and S-codoped carbon provides a rapid conductive framework for the fast charge transport during the sodium-storage process. Moreover, the beneficial confinement effect of the NSC layer effectively guarantees a superb cycle property for the MSS@NSC anode. The favorable synergistic effects between the highly conductive framework of the NSC and MSS heterostructure endow the MSS@NSC anode with satisfactory electrochemical Na-storage properties.

Ab Initio Prediction of Two-Dimensional GeSiBi2 Monolayer as Potential Anode Materials for Sodium-Ion Batteries.

The conceptualization and deployment of electrode materials for rechargeable sodium-ion batteries are key concerns for next-generation energy storage systems. In this contribution, the configuration stability of single-layer GeSiBi2 is systematically discussed based on first-principles calculations, and its potential as an anode material is further investigated. It is demonstrated that the phonon spectrum confirms the dynamic stability and the adsorption energy identifies a strong interaction between Na atoms and the substrate material. The electronic bands indicative of inherent metallicity contribute to the enhancement of electronic conductivity after Na adsorption. The multilayer adsorption of Na provides a theoretical capacity of 361.7 mAh/g, which is comparable to that of other representative two-dimensional anode materials. Moreover, the low diffusion barriers of 0.19 and 0.15 eV further guarantee the fast diffusion kinetics. These contributions signal that GeSiBi2 can be a compatible candidate for sodium-ion batteries anodes.

Liquid Gallium-Assisted Pyrolysis of MOF Affording CNT Non-Hollow Frameworks in High Yields for High-Performance Sodium-Ion Battery Anode.

Carbon materials have great potential for applications in energy, biology, and environment due to their excellent chemical and physical properties. Their preparation by carbonization methods encounters limitations and the carbon loss during pyrolysis in the form of gaseous molecules results in low yield of carbon materials. Herein a low-energy (600°C) and high-yield (82wt.%) carbonization strategy is developed using liquid gallium-assisted pyrolysis of metal-organic frameworks (MOFs) affording the N-doped carbon nanotube (CNT) non-hollow frameworks encapsulating Co nanoparticles. The liquid gallium layer offers protection against air, promotes heat transfer, and limits the escape of small carbonaceous gaseous molecules, which greatly improve the yields of the pyrolysis reaction. Experimental and theoretical results reveal that the synergistic interaction between CNTs and N/O-containing groups gives a non-hollow framework composed of N/O-enriched and open CNTs (NOCNTF-15, 15 denotes the 15mm thickness of the liquid gallium layer during the pyrolysis) with high specific capacity (185mAhg-1 at 10Ag-1) and ultra-stable cyclability (stable operation at 10Ag-1 and 50°C for 20000 cycles). This study provides a unique approach to carbonization that facilitates the practical application of low-cost CNTs and other MOFs-derived carbon materials in high-performance sodium-ion batteries (SIBs).

Azatriangulenetrione as the Anode Material for Sodium-Ion Batteries: Reversible Redox Chemistry Mediated by Lone Pair Electrons.

Redox-active organic molecules have potential as electrode materials, but their cycling stability is often limited by the irreversible formation of σ-bonds from the radical intermediates. Herein, we present an effective approach to achieve high reversibility by using lone pair electrons to mediate intramolecular radical-radical coupling. Azatriangulenetrione (1) was examined as the anode in sodium-ion batteries, which displayed a reversible four-step, one-electron redox chemistry. In situ electron spin resonance, ex situ Fourier transform infrared/X-ray photoelectron spectroscopy, and density functional theory calculation revealed that the unstable radical anions can couple with each other through the lone pair electrons of the central nitrogen atom, leading to stabilized radical species. Furthermore, scan-rate-dependent cyclic voltammetry measurements and galvanostatic intermittent titration techniques demonstrated that the redox reaction kinetics for radical formation were much faster than the radical paring process. This study offers deep insights into the design of highly reversible organic electrodes.

Unlocking the potential of a chemically modified blue phosphorene as anode materials for high-performance sodium-ion batteries

Blue phosphorene (Blu-Pn) has recently been identified as a new two-dimensional (2D) form of black phosphorus via the epitaxial growth method and has shown the ability to host a substantial amount of Na while serving as an anode in sodium-ion batteries (NIBs). However, its structural instability is an issue that hinders its further exploitability in NIBs. In this paper, we propose to chemically modify the Blu-Pn network by substituting six phosphorus atoms with a carbon source in the form of a C6 ring, constructing a new and robust CP2 nanosheet. Based on the state-of-the-art non-local van der Waals corrected density functional theory and ab initio molecular dynamic (AIMD) simulations, we systematically explore the feasibility of the designed CP2 as a potential anode material for NIBs. Adding a C6 ring in the Blu-Pn lattice reduces its energy gap from 2 eV to 1.3 eV, which disappears after Na adsorption, indicating a conductive character. Attributed to the synergistic effect, the adsorption energy of Na on CP2 nanosheet (−2.22 eV) is greatly decreased in comparison to the pristine carbon source (e.g., graphene with −0.78 eV) and pristine Blu-Pn (−1.85 eV). The Na diffusivity on CP2 at 300 K is predicted to be 4.90 × 10−11 m2/s by AIMD. The specific capacity is up to 604.1 mAh/g, which exceeds that of the commercialized graphite anode (372 mA h/g). Ultimately, the designed electrode provides a small open circuit potential of 0.66 V that falls within a desirable voltage range. This work paves the way for exploring Blu-Pn 2D anode materials for NIBs technology and provides valuable insights into surface chemical modification towards the long-term stability of Blu-Pn.

Cobalt selenide confined in nitrogen-doped carbon skeleton as high-rated capability anode for sodium-ion batteries

Cobalt selenide confined in nitrogen-doped carbon skeleton as high-rated capability anode for sodium-ion batteries

"Lasagna"-Structured SnS-TaS2 Misfit Layered Sulfide for Capacitive and Robust Sodium-Ion Storage.

Stannous sulfide (SnS), a conversion-alloying type anode for sodium-ion batteries, is strong Na+ storage activity, a low voltage platform, and high theoretical capacity. However, grain pulverization induced by intolerable volume change and phase aggregation causes quick capacity degradation and unsatisfactory rate capability. Herein, a novel "lasagna" strategy is developed by embedding a SnS layer into the interlayer of an electrochemically robust and electron-active TaS2 to form a misfit layered (SnS)1.15TaS2 superlattice. For Na+ storage, the rationally designed (SnS)1.15TaS2 anode exhibits high specific capacity, excellent rate capability, and robust cycling stability (729 mAh cm-3 at 15 C after 2000 cycles). Moreover, the as-assembled (SnS)1.15TaS2 || Na3V2(PO4)3 full cells achieve robust and fast Na+ storage performance with ≈100% capacity retention after 650 cycles at 15 C, which also demonstrates good low-temperature performance at -20°C with a capacity retention of 75% and 2 C high-rate charge/discharge ability.

"Lasagna"-Structured SnS-TaS2 Misfit Layered Sulfide for Capacitive and Robust Sodium-Ion Storage.

Stannous sulfide (SnS), a conversion-alloying type anode for sodium-ion batteries, is strong Na+ storage activity, a low voltage platform, and high theoretical capacity. However, grain pulverization induced by intolerable volume change and phase aggregation causes quick capacity degradation and unsatisfactory rate capability. Herein, a novel "lasagna" strategy is developed by embedding a SnS layer into the interlayer of an electrochemically robust and electron-active TaS2 to form a misfit layered (SnS)1.15TaS2 superlattice. For Na+ storage, the rationally designed (SnS)1.15TaS2 anode exhibits high specific capacity, excellent rate capability, and robust cycling stability (729 mAh cm-3 at 15 C after 2000 cycles). Moreover, the as-assembled (SnS)1.15TaS2 || Na3V2(PO4)3 full cells achieve robust and fast Na+ storage performance with ≈100% capacity retention after 650 cycles at 15 C, which also demonstrates good low-temperature performance at -20°C with a capacity retention of 75% and 2 C high-rate charge/discharge ability.

Understanding and Mitigating Lattice Collapse Degradation in Layered Oxide Materials for Sodium-Ion Battery Anode.

Na2Ti3O7 has attracted significant attention due to its ecofriendliness and cost-effectiveness for sodium-ion batteries. However, their limited cycling stability hampers their practical applications. Herein, we elucidate a mechanism of structural degradation caused by the heterogeneous phase transition in the Na2Ti3O7 anode using aberration-corrected (scanning) transmission electron microscopy (S)TEM and in situ TEM. It is found that the unevenly distributed phase transition results in the accumulation of strain, which promotes the growth of microcracks and eventually leads to structural decomposition and electrochemical failure. Motivated by this degradation mechanism, nanowires were proposed, and the structural stability is thus improved with the lattice strain effectively released. These findings deepen our understanding of ion transport and degradation mechanisms in intercalated layered electrode materials while emphasizing the significance of the material structure engineered for improving electrode performance.

Vacancies-Induced Delocalized States Cobalt Phosphide for Binder-Free Anode Toward Stable and High-Rate Sodium-Ion Batteries.

Metal phosphides with easy synthesis, controllable morphology, and high capacity are considered as potential anodes for sodium-ion batteries (SIBs). However, the inherent shortcomings of metal phosphating materials, such as conductivity, kinetics, volume strain, etc are not satisfactory, which hinders their large-scale application. Here, a CoP@carbon nanofibers-composite containing rich Co─N─C heterointerface and phosphorus vacancies grown on carbon cloth (CoP1-x@MEC) is synthesized as SIB anode to accomplish extraordinary capacity and ultra-long cycle life. The hybrid composite nanoreactor effectively impregnates defective CoP as active reaction center while offering Co─N─C layer to buffer the volume expansion during charge-discharge process. These vast active interfaces, favored electrolyte infiltration, and a well-structured ion-electron transport network synergistically improve Na+ storage and electrode kinetics. By virtue of these superiorities, CoP1-x@MEC binder-free anode delivers superb SIBs performance including a high areal capacity (2.47 mAh cm-2@0.2mA cm-2), high rate capability (0.443 mAh cm-2@6mA cm-2), and long cycling stability (300 cycles without decay), thus holding great promise for inexpensive binder-free anode-based SIBs for practical applications.

ZIF-derived "cocoon"-like in-situ Zn/N-doped carbon as high-capacity anodes for Li/Na-ion batteries

Owing to the unique structure and physicochemical properties, including high specific surface area, self-doped N atoms, open pore structure and good chemical stability, zeolitic imidazolate frameworks (ZIFs) and their derivatives have been widely used in the field of energy storage. Here, a new type of "cocoon"-like Zn/N doped ZIF-derived porous carbon (Zn@N-C-800) is synthesized as an anode for lithium-ion batteries (LIBs) and sodium ion batteries (SIBs) through a one-step carbonization process using a novel Zn-ZIF as the precursor. In Zn@N-C-800, the "cocoon"-like disordered carbon skeleton is conducive to electrolyte infiltration, while the Zn/N doping can provide additional active sites for ion storage. Benefiting from these unique structural characteristics, Zn@N-C-800 achieves excellent electrochemical performances as anode for both LIBs and SIBs: an ultrahigh rate capability of 352 mAh g−1 can be delivered at 12.8 A g−1 for LIBs; an outstanding long-term cycling stability (312 mAh g−1 at 1 A g−1 after 2000 cycles) can be achieved for SIBs. This paper provides new ideas for the design and preparation of high-performance anodes for LIBs and SIBs.

Steric Hindrance Engineering to Modulate the Closed Pores Formation of Polymer-Derived Hard Carbon for High-Performance Sodium-Ion Batteries.

The closed pores play a critical role in improving the sodium storage capacity of hard carbon (HC) anode, however, their formation mechanism as well as the efficient modulation strategy at molecular level in the polymer-derived HCs is still lacking. In this work, the steric hindrance effect has been proposed to create closed pores in the polymer-derived HCs for the first time through grafting the aromatic rings within and between the main chains in the precursor. The experimental data and theoretical calculation demonstrate that steric-hindrance effect from the aromatic ring side group can increase backbone rigidity and the internal free volumes in the polymer precursor, which can prevent the over graphitization and facilitate the formation of closed pores during the carbonization process. As a result, the as-prepared HC anode exhibits a remarkably enhanced discharge capacity of 340.3 mAh/g at 0.1 C, improved rate performance (210.7 mAh/g at 5 C) as well as boosted cycling stability (86.4% over 1000 cycles at 2C). This work provides a new insight into the formation mechanisms of closed pores via steric hindrance engineering, which can shed light on the development of high-performance polymer-derived HC anode for sodium-ion batteries.

Joule heating for structure reconstruction of hard carbon with superior sodium ion storage performance

Hard carbon anode for sodium ion batteries still remains many challenges including insufficient cycling life and initial Coulombic efficiency (ICE), weak rate capability and poor compatibility in common ester electrolytes. Here, we propose a Joule heating post-treatment including multifield sintering method to reconstruct the structure of hard carbon from thick graphene layers to more disordered vortex layer structure composed of thin and curved graphite-like domains. The molecular dynamics simulation and differential charge density distribution demonstrate the crucial effect of electric field in strengthening the interaction between the polar molecule groups and the graphene layer, leading to the distortion and expanding of graphene layer. This is a universal and highly efficient strategy to modify various hard carbons within minutes. The optimized hard carbon anode exhibits exceptional rate capability and cycling stability with a high retention rate of 88.4% after 15,000 cycles at 10C in ether electrolyte. It also displays remarkably improved reversible capacity, initial Coulombic efficiency ICE of 89.5% and cycling stability in ester electrolyte. It is revealed by in-situ electrochemical impedance spectroscopy and atomic force microscopy that the spontaneous formation of a thin, stable and inorganic substance-rich solid electrolyte interface layer with significantly improved mechanical property is largely responsible for the outstanding sodium-ion transport kinetics and long lifespan.

Properties of Ti2CO2 and Ti2CO2/G heterostructures as anodes of sodium-ion batteries by first-principles study

Properties of Ti2CO2 and Ti2CO2/G heterostructures as anodes of sodium-ion batteries by first-principles study